Showing 1–28 of 28 results for author: Pechal, M

Direct implementation of a perceptron in superconducting circuit quantum hardware

Authors: Marek Pechal, Federico Roy, Samuel A. Wilkinson, Gian Salis, Max Werninghaus, Michael J. Hartmann, Stefan Filipp

Abstract: The utility of classical neural networks as universal approximators suggests that their quantum analogues could play an important role in quantum generalizations of machine-learning methods. Inspired by the proposal in [Torrontegui and García-Ripoll 2019 EPL 125 30004], we demonstrate a superconducting qubit implementation of an adiabatic controlled gate, which generalizes the action of a classica… ▽ More The utility of classical neural networks as universal approximators suggests that their quantum analogues could play an important role in quantum generalizations of machine-learning methods. Inspired by the proposal in [Torrontegui and García-Ripoll 2019 EPL 125 30004], we demonstrate a superconducting qubit implementation of an adiabatic controlled gate, which generalizes the action of a classical perceptron as the basic building block of a quantum neural network. We show full control over the steepness of the perceptron activation function, the input weight and the bias by tuning the adiabatic gate length, the coupling between the qubits and the frequency of the applied drive, respectively. In its general form, the gate realizes a multi-qubit entangling operation in a single step, whose decomposition into single- and two-qubit gates would require a number of gates that is exponential in the number of qubits. Its demonstrated direct implementation as perceptron in quantum hardware may therefore lead to more powerful quantum neural networks when combined with suitable additional standard gates. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Journal ref: Phys. Rev. Research 4, 033190 (2022)

Characterization and tomography of a hidden qubit

Authors: M. Pechal, G. Salis, M. Ganzhorn, D. J. Egger, M. Werninghaus, S. Filipp

Abstract: In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilitie… ▽ More In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems. In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly. Instead, they may be controlled and read out only via single-qubit operations on connected 'control' qubits and a suitable set of two-qubit gates. We first discuss the impact of such restricted control capabilities on the quantum volume of specific qubit coupling networks. We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlled-phase two-qubit interactions enabled by a tunable coupler. We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. X 11, 041032 (2021)

Benchmarking the noise sensitivity of different parametric two-qubit gates in a single superconducting quantum computing platform

Authors: M. Ganzhorn, G. Salis, D. J. Egger, A. Fuhrer, M. Mergenthaler, C. Müller, P. Müller, S. Paredes, M. Pechal, M. Werninghaus, S. Filipp

Abstract: The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven… ▽ More The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven tunable coupler that mediates the interaction between two superconducting qubits. Using randomized benchmarking protocols we estimate an error per gate of $0.9\pm0.03\%$ and $1.3\pm0.4\%$ fidelity for the CZ and the iSWAP gate, respectively. We argue that spurious $ZZ$-type couplings are the dominant error source for the iSWAP gate, and that phase stability of all microwave drives is of utmost importance. Such differences in the achievable fidelities for different two-qubit gates have to be taken into account when map** quantum algorithms to real hardware. △ Less

Submitted 14 May, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 24 pages, including supplementary information

Journal ref: Phys. Rev. Research 2, 033447 (2020)

Radiative cooling of a spin ensemble

Authors: Bartolo Albanese, Sebastian Probst, Vishal Ranjan, Cristoph Zollitsch, Marek Pechal, Andreas Wallraff, John Morton, Denis Vion, Daniel Esteve, Emmanuel Flurin, Patrice Bertet

Abstract: Physical systems reach thermal equilibrium through energy exchange with their environment, and for spins in solids the relevant environment is almost always the host lattice in which they sit. However, recent studies motivated by observations from Purcell showed how coupling to a cavity can become the dominant form of relaxation for spins, given suitably strong spin-cavity coupling. In this regime… ▽ More Physical systems reach thermal equilibrium through energy exchange with their environment, and for spins in solids the relevant environment is almost always the host lattice in which they sit. However, recent studies motivated by observations from Purcell showed how coupling to a cavity can become the dominant form of relaxation for spins, given suitably strong spin-cavity coupling. In this regime, the cavity electromagnetic field takes over from the lattice as the dominant environment, inviting the prospect of controlling the spin temperature independently from that of the lattice, by engineering a suitable cavity field. Here, we report on precisely such control over spin temperature, illustrating a novel and universal method of electron spin hyperpolarisation. By switching the cavity input between loads at different temperatures we can control the electron spin polarisation, cooling it below the lattice temperature. Our demonstration uses donor spins in silicon coupled to a superconducting micro-resonator and we observe an increase of spin polarisation of over a factor of two. This approach provides general route to signal enhancement in electron spin resonance, or indeed nuclear magnetic resonance through dynamical nuclear spin polarisation (DNP). △ Less

Submitted 24 October, 2019; originally announced October 2019.

Electric fields for light: Propagation of microwave photons along a synthetic dimension

Authors: Nathan R. A. Lee, Marek Pechal, E. Alex Wollack, Patricio Arrangoiz-Arriola, Zhaoyou Wang, Amir H. Safavi-Naeini

Abstract: The evenly-spaced modes of an electromagnetic resonator are coupled to each other by appropriate time-modulation, leading to dynamics analogous to those of particles hop** between different sites of a lattice. This substitution of a real spatial dimension of a lattice with a "synthetic'" dimension in frequency space greatly reduces the hardware complexity of an analog quantum simulator. Complex… ▽ More The evenly-spaced modes of an electromagnetic resonator are coupled to each other by appropriate time-modulation, leading to dynamics analogous to those of particles hop** between different sites of a lattice. This substitution of a real spatial dimension of a lattice with a "synthetic'" dimension in frequency space greatly reduces the hardware complexity of an analog quantum simulator. Complex control and read-out of a highly multi-moded structure can thus be accomplished with very few physical control lines. We demonstrate this concept with microwave photons in a superconducting transmission line resonator by modulating the system parameters at frequencies near the resonator's free spectral range and observing propagation of photon wavepackets in time domain. The linear propagation dynamics are equivalent to a tight-binding model, which we probe by measuring scattering parameters between frequency sites. We extract an approximate tight-binding dispersion relation for the synthetic lattice and initialize photon wavepackets with well-defined quasimomenta and group velocities. As an example application of this platform in simulating a physical system, we demonstrate Bloch oscillations associated with a particle in a periodic potential and subject to a constant external field. The simulated field strongly affects the photon dynamics despite photons having zero charge. Our observation of photon dynamics along a synthetic frequency dimension generalizes immediately to topological photonics and single-photon power levels, and expands the range of physical systems addressable by quantum simulation. △ Less

Submitted 27 August, 2019; originally announced August 2019.

Comments: 23 pages, 11 figures

Journal ref: Phys. Rev. A 101, 053807 (2020)

Mechanical Purcell Filters for Microwave Quantum Machines

Authors: Agnetta Y. Cleland, Marek Pechal, Pieter-Jan C. Stas, Christopher J. Sarabalis, Amir H. Safavi-Naeini

Abstract: In circuit quantum electrodynamics, measuring the state of a superconducting qubit introduces a loss channel which can enhance spontaneous emission through the Purcell effect, thus decreasing qubit lifetime. This decay can be mitigated by performing the measurement through a Purcell filter which forbids signal propagation at the qubit transition frequency. If the filter is also well-matched at the… ▽ More In circuit quantum electrodynamics, measuring the state of a superconducting qubit introduces a loss channel which can enhance spontaneous emission through the Purcell effect, thus decreasing qubit lifetime. This decay can be mitigated by performing the measurement through a Purcell filter which forbids signal propagation at the qubit transition frequency. If the filter is also well-matched at the readout cavity frequency, it will protect the qubit from decoherence channels without sacrificing measurement speed. We propose and analyze design for a mechanical Purcell filter, which we also fabricate and characterize at room temperature. The filter is comprised of an array of nanomechanical resonators in thin-film lithium niobate, connected in a ladder topology, with series and parallel resonances arranged to produce a bandpass response. The modest footprint, steep band edges, and absence of cross-talk in these filters make them a novel and appealing alternative to analogous electromagnetic versions currently used in microwave quantum machines. △ Less

Submitted 20 May, 2019; originally announced May 2019.

Comments: 5 pages, 5 figures

Resolving the energy levels of a nanomechanical oscillator

Authors: Patricio Arrangoiz-Arriola, E. Alex Wollack, Zhaoyou Wang, Marek Pechal, Wentao Jiang, Timothy P. McKenna, Jeremy D. Witmer, Amir H. Safavi-Naeini

Abstract: The coherent states that describe the classical motion of a mechanical oscillator do not have well-defined energy, but are rather quantum superpositions of equally-spaced energy eigenstates. Revealing this quantized structure is only possible with an apparatus that measures the mechanical energy with a precision greater than the energy of a single phonon, $\hbarω_\text{m}$. One way to achieve this… ▽ More The coherent states that describe the classical motion of a mechanical oscillator do not have well-defined energy, but are rather quantum superpositions of equally-spaced energy eigenstates. Revealing this quantized structure is only possible with an apparatus that measures the mechanical energy with a precision greater than the energy of a single phonon, $\hbarω_\text{m}$. One way to achieve this sensitivity is by engineering a strong but nonresonant interaction between the oscillator and an atom. In a system with sufficient quantum coherence, this interaction allows one to distinguish different phonon number states by resolvable differences in the atom's transition frequency. Such dispersive measurements have been studied in cavity and circuit quantum electrodynamics where experiments using real and artificial atoms have resolved the photon number states of cavities. Here, we report an experiment where an artificial atom senses the motional energy of a driven nanomechanical oscillator with sufficient sensitivity to resolve the quantization of its energy. To realize this, we build a hybrid platform that integrates nanomechanical piezoelectric resonators with a microwave superconducting qubit on the same chip. We excite phonons with resonant pulses of varying amplitude and probe the resulting excitation spectrum of the qubit to observe phonon-number-dependent frequency shifts $\approx 5$ times larger than the qubit linewidth. Our result demonstrates a fully integrated platform for quantum acoustics that combines large couplings, considerable coherence times, and excellent control over the mechanical mode structure. With modest experimental improvements, we expect our approach will make quantum nondemolition measurements of phonons an experimental reality, leading the way to new quantum sensors and information processing approaches that use chip-scale nanomechanical devices. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: 16 pages, 10 figures

Journal ref: Nature, vol 571, pg 537-540 (2019)

Quantum dynamics of a few-photon parametric oscillator

Authors: Zhaoyou Wang, Marek Pechal, E. Alex Wollack, Patricio Arrangoiz-Arriola, Maodong Gao, Nathan R. Lee, Amir H. Safavi-Naeini

Abstract: Modulating the frequency of a harmonic oscillator at nearly twice its natural frequency leads to amplification and self-oscillation. Above the oscillation threshold, the field settles into a coherent oscillating state with a well-defined phase of either $0$ or $π$. We demonstrate a quantum parametric oscillator operating at microwave frequencies and drive it into oscillating states containing only… ▽ More Modulating the frequency of a harmonic oscillator at nearly twice its natural frequency leads to amplification and self-oscillation. Above the oscillation threshold, the field settles into a coherent oscillating state with a well-defined phase of either $0$ or $π$. We demonstrate a quantum parametric oscillator operating at microwave frequencies and drive it into oscillating states containing only a few photons. The small number of photons present in the system and the coherent nature of the nonlinearity prevents the environment from learning the randomly chosen phase of the oscillator. This allows the system to oscillate briefly in a quantum superposition of both phases at once - effectively generating a nonclassical Schrödinger's cat state. We characterize the dynamics and states of the system by analyzing the output field emitted by the oscillator and implementing quantum state tomography suited for nonlinear resonators. By demonstrating a quantum parametric oscillator and the requisite techniques for characterizing its quantum state, we set the groundwork for new schemes of quantum and classical information processing and extend the reach of these ubiquitous devices deep into the quantum regime. △ Less

Submitted 26 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. X 9, 021049 (2019)

Two-Photon Resonance Fluorescence of a Ladder-Type Atomic System

Authors: Simone Gasparinetti, Jean-Claude Besse, Marek Pechal, Robin D. Buijs, Christopher Eichler, Howard J. Carmichael, Andreas Wallraff

Abstract: Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a… ▽ More Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a superconducting, ladder-type artificial atom, a transmon, strongly coupled to a waveguide. We drive the two-photon transition between the ground and second-excited state at increasingly high powers and observe a resonance fluorescence peak whose intensity becomes comparable to single-photon emission until it splits into a Mollow-like triplet. We measure photon correlations of frequency-filtered spectral lines and find that while emission at the fundamental frequency stays antibunched, the resonance fluorescence peak at the two-photon transition is superbunched. Our results provide a route towards the realization of multi-photon sources in the microwave domain. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. A 100, 033802 (2019)

Quantum communication with time-bin encoded microwave photons

Authors: Philipp Kurpiers, Marek Pechal, Baptiste Royer, Paul Magnard, Theo Walter, Johannes Heinsoo, Yves Salathé, Abdulkadir Akin, Simon Storz, Jean-Claude Besse, Simone Gasparinetti, Alexandre Blais, Andreas Wallraff

Abstract: Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a… ▽ More Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a quantum channel connecting two transmon qubits using traveling microwave photons. This is achieved by encoding the quantum information as a time-bin superposition of a single photon, which simultaneously realizes high communication rates and high fidelities. The presented scheme is straightforward to implement in circuit QED and is fully microwave-controlled, making it an interesting candidate for future modular quantum computing architectures. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Applied 12, 044067 (2019)

Superconducting circuit quantum computing with nanomechanical resonators as storage

Authors: Marek Pechal, Patricio Arrangoiz-Arriola, Amir H. Safavi-Naeini

Abstract: We analyze the quantum information processing capability of a superconducting transmon circuit used to mediate interactions between quantum information stored in a collection of phononic crystal cavity resonators. Having only a single processing element to be controlled externally makes this approach significantly less hardware-intensive than traditional architectures with individual control of ea… ▽ More We analyze the quantum information processing capability of a superconducting transmon circuit used to mediate interactions between quantum information stored in a collection of phononic crystal cavity resonators. Having only a single processing element to be controlled externally makes this approach significantly less hardware-intensive than traditional architectures with individual control of each qubit. Moreover, when compared with the commonly considered alternative approach using coplanar waveguide or 3d cavity microwave resonators for storage, the nanomechanical resonators offer both very long lifetime and small size -- two conflicting requirements for microwave resonators. A detailed gate error analysis leads to an optimal value for the qubit-resonator coupling rate as a function of the number of mechanical resonators in the system. For a given set of system parameters, a specific amount of coupling and number of resonators is found to optimize the quantum volume, an approximate measure for the computational capacity of a system. We see this volume is higher in the proposed hybrid nanomechanical architecture than in the competing on-chip electromagnetic approach. △ Less

Submitted 24 August, 2018; originally announced August 2018.

Journal ref: Quantum Sci. Technol. 4 015006 (2018)

Observation of the Crossover from Photon Ordering to Delocalization in Tunably Coupled Resonators

Authors: Michele C. Collodo, Anton Potočnik, Simone Gasparinetti, Jean-Claude Besse, Marek Pechal, Mahdi Sameti, Michael J. Hartmann, Andreas Wallraff, Christopher Eichler

Abstract: Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulate… ▽ More Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulated magnetic flux to control the linear photon hop** rate between the two resonators and its ratio with the cross-Kerr rate. When increasing the hop** rate, we observe a crossover from an ordered to a delocalized state of photons. The presented coupling scheme is intrinsically robust to frequency disorder and may therefore prove useful for realizing larger-scale resonator arrays. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. Lett. 122, 183601 (2019)

Coupling a superconducting quantum circuit to a phononic crystal defect cavity

Authors: Patricio Arrangoiz-Arriola, E. Alex Wollack, Marek Pechal, Jeremy D. Witmer, Jeff T. Hill, Amir H. Safavi-Naeini

Abstract: Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a… ▽ More Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a 6 gigahertz acoustic resonance to a wavelength-scale volume of less than one cubic micron. The strong piezoelectricity of lithium niobate efficiently couples the localized vibrations to the electric field of a widely tunable high-impedance Josephson junction array resonator. We measure a direct phonon-photon coupling rate $g/2π\approx 1.6 \, \mathrm{MHz}$ and a mechanical quality factor $Q_\mathrm{m} \approx 3 \times 10^4$ leading to a cooperativity $C\sim 4$ when the two modes are tuned into resonance. Our work has direct application to engineering hybrid quantum systems for microwave-to-optical conversion as well as emerging architectures for quantum information processing. △ Less

Submitted 10 April, 2018; originally announced April 2018.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. X 8, 031007 (2018)

Fast and Unconditional All-Microwave Reset of a Superconducting Qubit

Authors: Paul Magnard, Philipp Kurpiers, Baptiste Royer, Theo Walter, Jean-Claude Besse, Simone Gasparinetti, Marek Pechal, Johannes Heinsoo, Simon Storz, Alexandre Blais, Andreas Wallraff

Abstract: Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with… ▽ More Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with $|g\rangle$ and $|f\rangle$ denoting the ground and second excited states of the transmon, and $|0\rangle$ and $|1\rangle$ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state with $0.2\%$ residual excitation in less than $500 \, \rm{ns}$. Our protocol is of practical interest as it has no requirements on the architecture, beyond those for fast and efficient single-shot readout of the transmon, and does not require feedback. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Journal ref: Phys. Rev. Lett. 121, 060502 (2018)

Deterministic Quantum State Transfer and Generation of Remote Entanglement using Microwave Photons

Authors: Philipp Kurpiers, Paul Magnard, Theo Walter, Baptiste Royer, Marek Pechal, Johannes Heinsoo, Yves Salathé, Abdulkadir Akin, Simon Storz, Jean-Claude Besse, Simone Gasparinetti, Alexandre Blais, Andreas Wallraff

Abstract: Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageo… ▽ More Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageous for fault-tolerant quantum computation because it reduces the threshold requirements and can achieve larger entanglement rates. Here, we implement deterministic state transfer and entanglement protocols between two superconducting qubits fabricated on separate chips. Superconducting circuits constitute a universal quantum node capable of sending, receiving, storing, and processing quantum information. Our implementation is based on an all-microwave cavity-assisted Raman process which entangles or transfers the qubit state of a transmon-type artificial atom to a time-symmetric itinerant single photon. We transfer qubit states at a rate of $50 \, \rm{kHz}$ using the emitted photons which are absorbed at the receiving node with a probability of $98.1 \pm 0.1 \%$ achieving a transfer process fidelity of $80.02 \pm 0.07 \%$. We also prepare on demand remote entanglement with a fidelity as high as $78.9 \pm 0.1 \%$. Our results are in excellent agreement with numerical simulations based on a master equation description of the system. This deterministic quantum protocol has the potential to be used as a backbone of surface code quantum error correction across different nodes of a cryogenic network to realize large-scale fault-tolerant quantum computation in the circuit quantum electrodynamic architecture. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 11 pages 8 Figures

Journal ref: Nature 558, 264-267 (2018)

Single-Shot Quantum Non-Demolition Detection of Itinerant Microwave Photons

Authors: Jean-Claude Besse, Simone Gasparinetti, Michele C. Collodo, Theo Walter, Philipp Kurpiers, Marek Pechal, Christopher Eichler, Andreas Wallraff

Abstract: Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting arti… ▽ More Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting artificial atom. By reading out the state of this atom in single shot, we reach an internal photon detection fidelity of 71%, limited by the coherence properties of the qubit. By characterizing the coherence and average number of photons in the field reflected off the detector, we demonstrate its quantum non-demolition nature. We envisage applications in generating heralded remote entanglement between qubits and for realizing logic gates between propagating microwave photons. △ Less

Submitted 30 November, 2017; originally announced November 2017.

Journal ref: Phys. Rev. X 8, 021003 (2018)

Millimeter-wave interconnects for microwave-frequency quantum machines

Authors: Marek Pechal, Amir H. Safavi-Naeini

Abstract: Superconducting microwave circuits form a versatile platform for storing and manipulating quantum information. A major challenge to further scalability is to find approaches for connecting these systems over long distances and at high rates. One approach is to convert the quantum state of a microwave circuit to optical photons that can be transmitted over kilometers at room temperature with little… ▽ More Superconducting microwave circuits form a versatile platform for storing and manipulating quantum information. A major challenge to further scalability is to find approaches for connecting these systems over long distances and at high rates. One approach is to convert the quantum state of a microwave circuit to optical photons that can be transmitted over kilometers at room temperature with little loss. Many proposals for electro-optic conversion between microwave and optics use optical driving of a weak three-wave mixing nonlinearity to convert the frequency of an excitation. Residual absorption of this optical pump leads to heating, which is problematic at cryogenic temperatures. Here we propose an alternative approach where a nonlinear superconducting circuit is driven to interconvert between microwave-frequency and millimeter-wave-frequency (300 GHz) photons. To understand the potential for quantum conversion between microwave and mm-wave photons, we consider the driven four-wave mixing quantum dynamics of nonlinear circuits. In contrast to the linear dynamics of the driven three-wave mixing converters, the proposed four-wave mixing converter has nonlinear decoherence channels that lead to a more complex parameter space of couplings and pump powers that we map out. We consider physical realizations of such converter circuits by deriving theoretically the upper bound on the maximum obtainable nonlinear coupling between any two modes in a lossless circuit, and synthesizing an optimal circuit based on realistic materials that saturates this bound. Our proposed circuit dissipates less than $10^{-9}$ times the energy of current electro-optic converters per qubit. Finally, we outline the quantum link budget for optical, microwave, and mm-wave connections, showing that our approach is viable for realizing interconnected quantum processors for intracity or quantum datacenter environments. △ Less

Submitted 16 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. A 96, 042305 (2017)

Correlations and entanglement of microwave photons emitted in a cascade decay

Authors: Simone Gasparinetti, Marek Pechal, Jean-Claude Besse, Mintu Mondal, Christopher Eichler, Andreas Wallraff

Abstract: An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their inten… ▽ More An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their intensities are strongly correlated in time, as measured in a double-beam coincidence experiment. Perhaps less intuitively, their phases can also be correlated, provided a single emitter is deterministically prepared into a superposition state, and the emitted radiation is detected in a phase-sensitive manner and with high efficiency. Here we have met these requirements by using a superconducting artificial atom, coherently driven to its second-excited state and decaying into a well-defined microwave mode. Our results highlight the coherent nature of cascade decay and demonstrate a novel protocol to generate entanglement between itinerant field modes. △ Less

Submitted 15 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. Lett. 119, 140504 (2017)

Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits

Authors: T. Walter, P. Kurpiers, S. Gasparinetti, P. Magnard, A. Potocnik, Y. Salathe, M. Pechal, M. Mondal, M. Oppliger, C. Eichler, A. Wallraff

Abstract: The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interactio… ▽ More The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affecting qubit coherence. We achieve this result by increasing the dispersive interaction strength, by choosing an optimal linewidth of the readout resonator, by employing a Purcell filter, and by utilizing phase-sensitive parametric amplification. In our experiment, we measure 98.25% readout fidelity in only 48 ns, when minimizing read-out time, and 99.2% in 88 ns, when maximizing the fidelity, limited predominantly by the qubit lifetime of 7.6 us. The presented scheme is also expected to be suitable for integration into a multiplexed readout architecture. △ Less

Submitted 25 January, 2017; v1 submitted 24 January, 2017; originally announced January 2017.

Comments: 10 pages, 7 figures; fixed pdf compile bug with the e' in Y. Salathe

Journal ref: Phys. Rev. Applied 7, 054020 (2017)

Superconducting switch for fast on-chip routing of quantum microwave fields

Authors: M. Pechal, J. -C. Besse, M. Mondal, M. Oppliger, S. Gasparinetti, A. Wallraff

Abstract: A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and th… ▽ More A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and the associated experiments by heat dissipation. Switches based on semiconductors or microelectromechanical systems have a lower thermal budget but are not readily integrated with current superconducting circuits. Here we design and test an on-chip switch built by combining tunable transmission-line resonators with microwave beam-splitters. The device is superconducting and as such dissipates a negligible amount of heat. It is compatible with current superconducting circuit fabrication techniques, operates with a bandwidth exceeding $100\,\mathrm{MHz}$, is capable of handling photon fluxes on the order of $10^{5}\,μ\mathrm{s}^{-1}$, equivalent to powers exceeding $-90\,\mathrm{dBm}$, and can be switched within approximately $6-8\,\mathrm{ns}$. We successfully demonstrate operation of the device in the quantum regime by integrating it on a chip with a single-photon source and using it to route non-classical itinerant microwave fields at the single-photon level. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Journal ref: Phys. Rev. Applied 6, 024009 (2016)

Measurement of a Vacuum-Induced Geometric Phase

Authors: Simone Gasparinetti, Simon Berger, Abdufarrukh A. Abdumalikov, Marek Pechal, Stefan Filipp, Andreas J. Wallraff

Abstract: Berry's geometric phase naturally appears when a quantum system is driven by an external field whose parameters are slowly and cyclically changed. A variation in the coupling between the system and the external field can also give rise to a geometric phase, even when the field is in the vacuum state or any other Fock state. Here we demonstrate the appearance of a vacuum-induced Berry phase in an a… ▽ More Berry's geometric phase naturally appears when a quantum system is driven by an external field whose parameters are slowly and cyclically changed. A variation in the coupling between the system and the external field can also give rise to a geometric phase, even when the field is in the vacuum state or any other Fock state. Here we demonstrate the appearance of a vacuum-induced Berry phase in an artificial atom, a superconducting transmon, interacting with a single mode of a microwave cavity. As we vary the phase of the interaction, the artificial atom acquires a geometric phase determined by the path traced out in the combined Hilbert space of the atom and the quantum field. Our ability to control this phase opens new possibilities for the geometric manipulation of atom-cavity systems also in the context of quantum information processing. △ Less

Submitted 20 May, 2016; originally announced May 2016.

Comments: 5 + 6 pages

Journal ref: Sci. Adv. 2, e1501732 (2016)

Measurement of geometric dephasing using a superconducting qubit

Authors: S. Berger, M. Pechal, P. Kurpiers, A. A. Abdumalikov, C. Eichler, J. A. Mlynek, A. Shnirman, Yuval Gefen, A. Wallraff, S. Filipp

Abstract: A quantum system interacting with its environment is subject to dephasing which ultimately destroys the information it holds. Using a superconducting qubit, we experimentally show that this dephasing has both dynamic and geometric origins. It is found that geometric dephasing, which is present even in the adiabatic limit and when no geometric phase is acquired, can either reduce or restore coheren… ▽ More A quantum system interacting with its environment is subject to dephasing which ultimately destroys the information it holds. Using a superconducting qubit, we experimentally show that this dephasing has both dynamic and geometric origins. It is found that geometric dephasing, which is present even in the adiabatic limit and when no geometric phase is acquired, can either reduce or restore coherence depending on the orientation of the path the qubit traces out in its projective Hilbert space. It accompanies the evolution of any system in Hilbert space subjected to noise. △ Less

Submitted 16 October, 2015; originally announced October 2015.

Comments: 10 pages, 6 figures

Journal ref: Nature Communications 6, 8757 (2015)

Microwave-Induced Amplitude and Phase Tunable Qubit-Resonator Coupling in Circuit Quantum Electrodynamics

Authors: S. Zeytinoglu, M. Pechal, S. Berger, A. A. Abdumalikov Jr., A. Wallraff, S. Filipp

Abstract: In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit -- photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave reson… ▽ More In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit -- photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequency, a Jaynes-Cummings type interaction is induced, which is tunable both in amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with controlled temporal shape [Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths. △ Less

Submitted 12 February, 2015; originally announced February 2015.

Journal ref: Phys. Rev. A 91, 043846 (2015)

Microwave-controlled generation of shaped single photons in circuit quantum electrodynamics

Authors: M. Pechal, L. Huthmacher, C. Eichler, S. Zeytinoglu, A. A. Abdumalikov Jr., S. Berger, A. Wallraff, S. Filipp

Abstract: Large-scale quantum information processors or quantum communication networks will require reliable exchange of information between spatially separated nodes. The links connecting these nodes can be established using traveling photons that need to be absorbed at the receiving node with high efficiency. This is achievable by sha** the temporal profile of the photons and absorbing them at the recei… ▽ More Large-scale quantum information processors or quantum communication networks will require reliable exchange of information between spatially separated nodes. The links connecting these nodes can be established using traveling photons that need to be absorbed at the receiving node with high efficiency. This is achievable by sha** the temporal profile of the photons and absorbing them at the receiver by time reversing the emission process. Here, we demonstrate a scheme for creating shaped microwave photons using a superconducting transmon-type three-level system coupled to a transmission line resonator. In a second-order process induced by a modulated microwave drive, we controllably transfer a single excitation from the third level of the transmon to the resonator and shape the emitted photon. We reconstruct the density matrices of the created single-photon states and show that the photons are antibunched. We also create multipeaked photons with a controlled amplitude and phase. In contrast to similar existing schemes, the one we present here is based solely on microwave drives, enabling operation with fixed frequency transmons. △ Less

Submitted 5 November, 2014; v1 submitted 19 August, 2013; originally announced August 2013.

Journal ref: Physical Review X 4, 041010 (2014)

Experimental Realization of Non-Abelian Geometric Gates

Authors: A. A. Abdumalikov, J. M. Fink, K. Juliusson, M. Pechal, S. Berger, A. Wallraff, S. Filipp

Abstract: The geometric aspects of quantum mechanics are underlined most prominently by the concept of geometric phases, which are acquired whenever a quantum system evolves along a closed path in Hilbert space. The geometric phase is determined only by the shape of this path and is -- in its simplest form -- a real number. However, if the system contains degenerate energy levels, matrix-valued geometric ph… ▽ More The geometric aspects of quantum mechanics are underlined most prominently by the concept of geometric phases, which are acquired whenever a quantum system evolves along a closed path in Hilbert space. The geometric phase is determined only by the shape of this path and is -- in its simplest form -- a real number. However, if the system contains degenerate energy levels, matrix-valued geometric phases, termed non-abelian holonomies, can emerge. They play an important role for the creation of synthetic gauge fields in cold atomic gases and the description of non-abelian anyon statistics. Moreover, it has been proposed to exploit non-abelian holonomic gates for robust quantum computation. In contrast to abelian geometric phases, non-abelian ones have been observed only in nuclear quadrupole resonance experiments with a large number of spins and without fully characterizing the geometric process and its non-commutative nature. Here, we realize non-abelian holonomic quantum operations on a single superconducting artificial three-level atom by applying a well controlled two-tone microwave drive. Using quantum process tomography, we determine fidelities of the resulting non-commuting gates exceeding 95 %. We show that a sequence of two paths in Hilbert space traversed in different order yields inequivalent transformations, which is an evidence for the non-abelian character of the implemented holonomic quantum gates. In combination with two-qubit operations, they form a universal set of gates for holonomic quantum computation. △ Less

Submitted 18 April, 2013; originally announced April 2013.

Comments: In press in Nature. Published online on April 17, 2013

Journal ref: Nature 496 (2013) 482-485

Exploring the Effect of Noise on the Berry Phase

Authors: S. Berger, M. Pechal, A. A. Abdumalikov Jr., C. Eichler, L. Steffen, A. Fedorov, A. Wallraff, S. Filipp

Abstract: We make use of a superconducting qubit to study the effects of noise on adiabatic geometric phases. The state of the system, an effective spin one-half particle, is adiabatically guided along a closed path in parameter space and thereby acquires a geometric phase. By introducing artificial fluctuations in the control parameters, we measure the geometric contribution to dephasing for a variety of n… ▽ More We make use of a superconducting qubit to study the effects of noise on adiabatic geometric phases. The state of the system, an effective spin one-half particle, is adiabatically guided along a closed path in parameter space and thereby acquires a geometric phase. By introducing artificial fluctuations in the control parameters, we measure the geometric contribution to dephasing for a variety of noise powers and evolution times. Our results clearly show that only fluctuations which distort the path lead to geometric dephasing. In a direct comparison with the dynamic phase, which is path-independent, we observe that the adiabatic geometric phase is less affected by noise-induced dephasing. This observation directly points towards the potential of geometric phases for quantum gates or metrological applications. △ Less

Submitted 26 June, 2013; v1 submitted 13 February, 2013; originally announced February 2013.

Comments: 5 pages, 4 figures

Journal ref: Physical Review A, 060303(R) (2013)

Geometric phases in superconducting qubits beyond the two-level-approximation

Authors: S. Berger, M. Pechal, S. Pugnetti, A. A. Abdumalikov Jr, L. Steffen, A. Fedorov, A. Wallraff, S. Filipp

Abstract: Geometric phases, which accompany the evolution of a quantum system and depend only on its trajectory in state space, are commonly studied in two-level systems. Here, however, we study the adiabatic geometric phase in a weakly anharmonic and strongly driven multi-level system, realised as a superconducting transmon-type circuit. We measure the contribution of the second excited state to the two-le… ▽ More Geometric phases, which accompany the evolution of a quantum system and depend only on its trajectory in state space, are commonly studied in two-level systems. Here, however, we study the adiabatic geometric phase in a weakly anharmonic and strongly driven multi-level system, realised as a superconducting transmon-type circuit. We measure the contribution of the second excited state to the two-level geometric phase and find good agreement with theory treating higher energy levels perturbatively. By changing the evolution time, we confirm the independence of the geometric phase of time and explore the validity of the adiabatic approximation at the transition to the non-adiabatic regime. △ Less

Submitted 7 June, 2012; v1 submitted 5 April, 2012; originally announced April 2012.

Comments: 5 pages, 3 figures

Journal ref: Physical Review B 85, 220502(R) (2012)

Geometric Phase and Non-Adiabatic Effects in an Electronic Harmonic Oscillator

Authors: M. Pechal, S. Berger, A. A. Abdumalikov Jr., J. M. Fink, J. A. Mlynek, L. Steffen, A. Wallraff, S. Filipp

Abstract: Steering a quantum harmonic oscillator state along cyclic trajectories leads to a path-dependent geometric phase. Here we describe an experiment observing this geometric phase in an electronic harmonic oscillator. We use a superconducting qubit as a non-linear probe of the phase, otherwise unobservable due to the linearity of the oscillator. Our results demonstrate that the geometric phase is, for… ▽ More Steering a quantum harmonic oscillator state along cyclic trajectories leads to a path-dependent geometric phase. Here we describe an experiment observing this geometric phase in an electronic harmonic oscillator. We use a superconducting qubit as a non-linear probe of the phase, otherwise unobservable due to the linearity of the oscillator. Our results demonstrate that the geometric phase is, for a variety of cyclic trajectories, proportional to the area enclosed in the quadrature plane. At the transition to the non-adiabatic regime, we study corrections to the phase and dephasing of the qubit caused by qubit-resonator entanglement. The demonstrated controllability makes our system a versatile tool to study adiabatic and non-adiabatic geometric phases in open quantum systems and to investigate the potential of geometric gates for quantum information processing. △ Less

Submitted 22 December, 2011; v1 submitted 6 September, 2011; originally announced September 2011.

Journal ref: Phys. Rev. Lett. 108, 170401 (2012)