Showing 1–44 of 44 results for author: Pearson, D

Lineshape Optimization in Inhomogeneous $Λ$-type Quantum Memory

Authors: Kai Shinbrough, Donny R. Pearson Jr., Virginia O. Lorenz, Elizabeth A. Goldschmidt

Abstract: Photonic quantum memory is a crucial elementary operation in photonic quantum information processing. While many physically distinct memory protocols and hardware implementations have been applied to this task, the development of a quantum memory performant in all relevant metrics simultaneously (e.g., efficiency, bandwidth, lifetime, etc.) is still an open challenge. In this work, we focus on inh… ▽ More Photonic quantum memory is a crucial elementary operation in photonic quantum information processing. While many physically distinct memory protocols and hardware implementations have been applied to this task, the development of a quantum memory performant in all relevant metrics simultaneously (e.g., efficiency, bandwidth, lifetime, etc.) is still an open challenge. In this work, we focus on inhomogeneously broadened ensembles of $Λ$-type quantum emitters, which have long coherence lifetimes and broad bandwidth compatibility, but tend to exhibit low efficiency, in part due to technical constraints on medium growth and preparation, and in part due to inefficient use of a key resource in these systems: the inhomogeneously broadened excited state lineshape. We investigate the properties of electromagnetically induced transparency (EIT) for a survey of inhomogeneous lineshapes that are straightforward to realize experimentally, and optimize the memory efficiency for each lineshape over a large range of experimental parameters. We compare the optimal EIT efficiency to the well-known atomic frequency comb (AFC) protocol, which also relies on spectral sha** of the inhomogeneous broadening, and observe that with sufficient control field power the optimized lineshapes allow more efficient storage. Finally, we optimize over the inhomogeneous lineshape in a protocol agnostic fashion by numerically constructing the linear integral kernel describing the memory interaction and using a singular value decomposition and interpolation procedure to ensure optimality of the resulting lineshape. △ Less

Submitted 22 May, 2024; originally announced May 2024.

An intermediate morphology in the patterning of the crystalline Ge(001) surface induced by ion irradiation

Authors: Denise J. Erb, Daniel A. Pearson, Tomáš Škereň, Martin Engler, R. Mark Bradley, Stefan Facsko

Abstract: We investigate the morphologies of the Ge(001) surface that are produced by bombardment with a normally incident, broad argon ion beam at sample temperatures above the recrystallization temperature. Two previously-observed kinds of topographies are seen, i.e., patterns consisting of upright and inverted rectangular pyramids, as well as patterns composed of shallow, isotropic basins. In addition, w… ▽ More We investigate the morphologies of the Ge(001) surface that are produced by bombardment with a normally incident, broad argon ion beam at sample temperatures above the recrystallization temperature. Two previously-observed kinds of topographies are seen, i.e., patterns consisting of upright and inverted rectangular pyramids, as well as patterns composed of shallow, isotropic basins. In addition, we observe the formation of an unexpected third type of pattern for intermediate values of the temperature, ion energy and ion flux. In this type of intermediate morphology, isolated peaks with rectangular cross sections stand above a landscape of shallow, rounded basins. We also extend past theoretical work to include a second order correction term that comes from the curvature dependence of the sputter yield. For a range of parameter values, the resulting continuum model of the surface dynamics produces patterns that are remarkably similar to the intermediate morphologies we observe in our experiments. The formation of the isolated peaks is the result of a term that is not ordinarily included in the equation of motion, a second order correction to the curvature dependence of the sputter yield. △ Less

Submitted 15 December, 2023; v1 submitted 13 April, 2023; originally announced April 2023.

The Enhanced Resolution Imager and Spectrograph for the VLT

Authors: R. Davies, O. Absil, G. Agapito, A. Agudo Berbel, A. Baruffolo, V. Biliotti, M. Bonaglia, M. Bonse, R. Briguglio, P. Campana, Y. Cao, L. Carbonaro, A. Cortes, G. Cresci, Y. Dallilar, F. Dannert, R. J. De Rosa, M. Deysenroth, I. Di Antonio, A. Di Cianno, G. Di Rico, D. Doelman, M. Dolci, R. Dorn, F. Eisenhauer , et al. (59 additional authors not shown)

Abstract: ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars… ▽ More ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars that makes use of the Adaptive Optics Facility, and considerably improves on their performance. The observational modes ERIS provides are integral field spectroscopy at 1-2.5 μm, imaging at 1-5 μm with several options for high contrast imaging, and longslit spectroscopy at 3-4 μm, The instrument is installed at the Cassegrain focus of UT4 at the VLT and, following its commissioning during 2022, has been made available to the community. △ Less

Submitted 26 April, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: 20 pages with 29 figures; accepted for A&A (minor changes)

Broadband Quantum Memory in Atomic Ensembles

Authors: Kai Shinbrough, Donny R. Pearson Jr., Bin Fang, Elizabeth A. Goldschmidt, Virginia O. Lorenz

Abstract: Broadband quantum memory is critical to enabling the operation of emerging photonic quantum technology at high speeds. Here we review a central challenge to achieving broadband quantum memory in atomic ensembles -- what we call the 'linewidth-bandwidth mismatch' problem -- and the relative merits of various memory protocols and hardware used for accomplishing this task. We also review the theory u… ▽ More Broadband quantum memory is critical to enabling the operation of emerging photonic quantum technology at high speeds. Here we review a central challenge to achieving broadband quantum memory in atomic ensembles -- what we call the 'linewidth-bandwidth mismatch' problem -- and the relative merits of various memory protocols and hardware used for accomplishing this task. We also review the theory underlying atomic ensemble quantum memory and its extensions to optimizing memory efficiency and characterizing memory sensitivity. Finally, we examine the state-of-the-art performance of broadband atomic ensemble quantum memories with respect to three key metrics: efficiency, memory lifetime, and noise. △ Less

Submitted 6 February, 2023; v1 submitted 20 January, 2023; originally announced January 2023.

Comments: 40 pages, 11 figures, submitted to Advances in AMO Physics

Towards Wireless Ranging and Synchronization using CubeSat Software-Defined Radio Subsystems

Authors: Markus Gardill, Dominik Pearson, Julian Scharnagl, Klaus Schilling

Abstract: An approach towards wireless ranging and synchronization using commercial of-the-shelf software-defined radio payloads for small satellites, esp. CubeSats is studied. The approach only relies on the programmable logic configuration and processing system software. No hardware modifications or additions to the payloads are necessary. Experimental evaluation of the initial implementation shows a stan… ▽ More An approach towards wireless ranging and synchronization using commercial of-the-shelf software-defined radio payloads for small satellites, esp. CubeSats is studied. The approach only relies on the programmable logic configuration and processing system software. No hardware modifications or additions to the payloads are necessary. Experimental evaluation of the initial implementation shows a standard deviation of time-of-flight-based ranging measurements in the order of 1 cm, which renders the concept of interest for distributed satellite system missions. △ Less

Submitted 1 December, 2022; originally announced December 2022.

Synthesis of Eu(HCOO)$_3$ and Eu(HCOO)$_{3}\cdot$(HCONH$_2$)$_2$ crystals and observation of their $^5$D$_{0}\rightarrow ^{7}$F$_0$ transition for quantum information systems

Authors: Zachary W. Riedel, Donny R. Pearson Jr., Manohar H. Karigerasi, Julio A. N. T. Soares, Elizabeth A. Goldschmidt, Daniel P. Shoemaker

Abstract: Two stoichiometric metal-organic frameworks containing Eu$^{3+}$ cations are probed as candidates for photon-based quantum information storage. Synthesis procedures for growing 0.2 mm, rod-shaped Eu(HCOO)$_3$ and 1-3 mm, rhombohedral Eu(HCOO)$_{3}\cdot$(HCONH$_2$)$_2$ single crystals are presented with visible precipitation as soon as 1 h into heating for Eu(HCOO)$_3$ and 24 h for Eu(HCOO)… ▽ More Two stoichiometric metal-organic frameworks containing Eu$^{3+}$ cations are probed as candidates for photon-based quantum information storage. Synthesis procedures for growing 0.2 mm, rod-shaped Eu(HCOO)$_3$ and 1-3 mm, rhombohedral Eu(HCOO)$_{3}\cdot$(HCONH$_2$)$_2$ single crystals are presented with visible precipitation as soon as 1 h into heating for Eu(HCOO)$_3$ and 24 h for Eu(HCOO)$_{3}\cdot$(HCONH$_2$)$_2$. Room temperature and 1.4 K photoluminescence measurements of the $^5$D$_{0}\rightarrow {^7}$F$_J$ transitions of Eu$^{3+}$ are analyzed for both compounds. Comparisons of peak width and intensity are discussed along with the notable first report for both of the $^5$D$_{0}\rightarrow {^7}$F$_0$ transition, the hyperfine structure of which has potential use in quantum memory applications. The air instability of Eu(HCOO)$_{3}\cdot$(HCONH$_2$)$_2$ and the transformation of its photoluminescence properties are discussed. △ Less

Submitted 6 May, 2022; v1 submitted 8 March, 2022; originally announced March 2022.

Comments: 15 pages, 16 figures

Planck intermediate results. LVII. Joint Planck LFI and HFI data processing

Authors: Planck Collaboration, Y. Akrami, K. J. Andersen, M. Ashdown, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, S. Basak, K. Benabed, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. R. Bond, J. Borrill, C. Burigana, R. C. Butler, E. Calabrese, B. Casaponsa, H. C. Chiang, L. P. L. Colombo, C. Combet, B. P. Crill, F. Cuttaia , et al. (114 additional authors not shown)

Abstract: We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis… ▽ More We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis pipelines. The net effect of the improvements is lower levels of noise and systematics in both frequency and component maps at essentially all angular scales, as well as notably improved internal consistency between the various frequency channels. Based on the NPIPE maps, we present the first estimate of the Solar dipole determined through component separation across all nine Planck frequencies. The amplitude is ($3366.6 \pm 2.7$)$μ$K, consistent with, albeit slightly higher than, earlier estimates. From the large-scale polarization data, we derive an updated estimate of the optical depth of reionization of $τ= 0.051 \pm 0.006$, which appears robust with respect to data and sky cuts. There are 600 complete signal, noise and systematics simulations of the full-frequency and detector-set maps. As a Planck first, these simulations include full time-domain processing of the beam-convolved CMB anisotropies. The release of NPIPE maps and simulations is accompanied with a complete suite of raw and processed time-ordered data and the software, scripts, auxiliary data, and parameter files needed to improve further on the analysis and to run matching simulations. △ Less

Submitted 9 July, 2020; originally announced July 2020.

Comments: 97 pages, 93 figures and 16 tables, abstract abridged for arXiv submission, accepted for publication in A&A

Journal ref: A&A 643, A42 (2020)

Computing 3 point correlation function randoms counts without the randoms catalogue

Authors: David W. Pearson, Lado Samushia

Abstract: As we move towards future galaxy surveys, the three-point statistics will be increasingly leveraged to enhance the constraining power of the data on cosmological parameters. An essential part of the three-point function estimation is performing triplet counts of synthetic data points in random catalogues. Since triplet counting algorithms scale at best as $\mathcal{O}(N^2\log N)$ with the number o… ▽ More As we move towards future galaxy surveys, the three-point statistics will be increasingly leveraged to enhance the constraining power of the data on cosmological parameters. An essential part of the three-point function estimation is performing triplet counts of synthetic data points in random catalogues. Since triplet counting algorithms scale at best as $\mathcal{O}(N^2\log N)$ with the number of particles and the random catalogues are typically at least 50 times denser than the data; this tends to be by far the most time-consuming part of the measurements. Here we present a simple method of computing the necessary triplet counts involving uniform random distributions through simple one-dimensional integrals. The method speeds up the computation of the three-point function by orders of magnitude, eliminating the need for random catalogues, with the simultaneous pair and triplet counting of the data points alone being sufficient. △ Less

Submitted 2 May, 2019; v1 submitted 22 March, 2019; originally announced March 2019.

Comments: Accepted to MNRAS Letters

Laboratory Demonstration of an Active Optics System for High-Resolution Deployable CubeSat

Authors: Noah Schwartz, David Pearson, Stephen Todd, Maria Milanova, William Brzozowski, Andy Vick, David Lunney, Donald MacLeod, Steve Greenland, Jean-François Sauvage, Benjamin Gore

Abstract: In this paper we present HighRes: a laboratory demonstration of a 3U CubeSat with a deployable primary mirror that has the potential of achieving high-resolution imaging for Earth Observation. The system is based on a Cassegrain telescope with a segmented primary mirror composed of 4 petals that form an effective aperture of 300 mm. The design provides diffraction limited performance over the enti… ▽ More In this paper we present HighRes: a laboratory demonstration of a 3U CubeSat with a deployable primary mirror that has the potential of achieving high-resolution imaging for Earth Observation. The system is based on a Cassegrain telescope with a segmented primary mirror composed of 4 petals that form an effective aperture of 300 mm. The design provides diffraction limited performance over the entire field-of-view and allows for a panchromatic ground-sampling distance of less than 1 m at an altitude of 350 km. The alignment and co-phasing of the mirror segments is performed by focal plane sharpening and is validated through rigorous numerical simulations. The opto-mechanical design of the prototype and its laboratory demonstration are described and measurements from the on-board metrology sensors are presented. This data verifies that the performance of the mirror deployment and manipulation systems is sufficient for co-phasing. In addition, it is shown that the mirrors can be driven to any target position with an accuracy of 25 nm using closed-loop feedback between the mirror motors and the on-board metrology. △ Less

Submitted 24 September, 2018; originally announced September 2018.

Comments: 15 pages, 19 figures, 4S Symposium, Conference Proceeding, Sorrento, Italy, May 28 - June 1, 2018

ERIS: revitalising an adaptive optics instrument for the VLT

Authors: Richard Davies, Simone Esposito, Hans Martin Schmid, William Taylor, Guido Agapito, Alexander Agudo Berbel, Andrea Baruffolo, Valdemaro Biliotti, Beth Biller, Martin Black, Anna Boehle, Runa Briguglio, Alexander Buron, Luca Carbonaro, Angela Cortes, Giovanni Cresci, Matthias Deysenroth, Amico Di Cianno, Gianluca Di Rico, David Doelman, Mauro Dolci, Reinhold Dorn, Frank Eisenhauer, Daniela Fantinel, Debora Ferruzzi , et al. (41 additional authors not shown)

Abstract: ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably imp… ▽ More ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel. △ Less

Submitted 13 July, 2018; originally announced July 2018.

Comments: 12 pages, Proc SPIE 10702 "Ground-Based and Airborne Instrumentation for Astronomy VII"

A Detection of the Baryon Acoustic Oscillation Features in the SDSS BOSS DR12 Galaxy Bispectrum

Authors: David W. Pearson, Lado Samushia

Abstract: We present the first high significance detection ($4.1σ$) of the Baryon Acoustic Oscillations (BAO) feature in the galaxy bispectrum of the twelfth data release (DR12) of the Baryon Oscillation Spectroscopic Survey (BOSS) CMASS sample ($0.43 \leq z \leq 0.7$). We measured the scale dilation parameter, $α$, using the power spectrum, bispectrum, and both simultaneously for DR12, plus 2048 MultiDark-… ▽ More We present the first high significance detection ($4.1σ$) of the Baryon Acoustic Oscillations (BAO) feature in the galaxy bispectrum of the twelfth data release (DR12) of the Baryon Oscillation Spectroscopic Survey (BOSS) CMASS sample ($0.43 \leq z \leq 0.7$). We measured the scale dilation parameter, $α$, using the power spectrum, bispectrum, and both simultaneously for DR12, plus 2048 MultiDark-PATCHY mocks in the North and South Galactic Caps (NGC and SGC, respectively), and the volume weighted averages of those two samples (N+SGC). The fitting to the mocks validated our analysis pipeline, yielding values consistent with the mock cosmology. By fitting to the power spectrum and bispectrum separately, we tested the robustness of our results, finding consistent values from the NGC, SGC and N+SGC in all cases. We found $D_{\mathrm{V}} = 2032 \pm 24 (\mathrm{stat.}) \pm 15 (\mathrm{sys.})$ Mpc, $D_{\mathrm{V}} = 2038 \pm 55 (\mathrm{stat.}) \pm 15 (\mathrm{sys.})$ Mpc, and $D_{\mathrm{V}} = 2031 \pm 22 (\mathrm{stat.}) \pm 10 (\mathrm{sys.})$ Mpc from the N+SGC power spectrum, bispectrum and simultaneous fitting, respectively. △ Less

Submitted 15 December, 2017; v1 submitted 13 December, 2017; originally announced December 2017.

Comments: Submitted to Monthly Notices of the Royal Astronomical Society. 13 pages, 11 figures

Optimal Weights For Measuring Redshift Space Distortions in Multi-tracer Galaxy Catalogues

Authors: David W. Pearson, Lado Samushia, Praful Gagrani

Abstract: Since the volume accessible to galaxy surveys is fundamentally limited, it is extremely important to analyse available data in the most optimal fashion. One way of enhancing the cosmological information extracted from the clustering of galaxies is by weighting the galaxy field. The most widely used weighting schemes assign weights to galaxies based on the average local density in the region (FKP w… ▽ More Since the volume accessible to galaxy surveys is fundamentally limited, it is extremely important to analyse available data in the most optimal fashion. One way of enhancing the cosmological information extracted from the clustering of galaxies is by weighting the galaxy field. The most widely used weighting schemes assign weights to galaxies based on the average local density in the region (FKP weights) and their bias with respect to the dark matter field (PVP weights). They are designed to minimize the fractional variance of the galaxy power-spectrum. We demonstrate that the currently used bias dependent weighting scheme can be further optimized for specific cosmological parameters. We develop a procedure for computing the optimal weights and test them against mock catalogues for which the values of all fitting parameters, as well as the input power-spectrum are known. We show that by applying these weights to the joint power-spectrum of Emission Line Galaxies and Luminous Red Galaxies from the Dark Energy Spectroscopic Instrument survey, the variance in the measured growth rate parameter can be reduced by as much as 36 per cent. △ Less

Submitted 19 September, 2016; v1 submitted 10 June, 2016; originally announced June 2016.

Comments: 9 pages, 3 figures, 3 tables. Matches accepted version in Monthly Notices of the Royal Astronomical Society

Producing nanodot arrays with improved hexagonal order by patterning surfaces before ion sputtering

Authors: Daniel A. Pearson, R. Mark Bradley, Francis C. Motta, Patrick D. Shipman

Abstract: When the surface of a nominally flat binary material is bombarded with a broad, normally-incident ion beam, disordered hexagonal arrays of nanodots can form. Shipman and Bradley have derived equations of motion that govern the coupled dynamics of the height and composition of such a surface [P. D. Shipman and R. M. Bradley, Phys. Rev. B 84, 085420 (2011)]. We investigate the influence of initial c… ▽ More When the surface of a nominally flat binary material is bombarded with a broad, normally-incident ion beam, disordered hexagonal arrays of nanodots can form. Shipman and Bradley have derived equations of motion that govern the coupled dynamics of the height and composition of such a surface [P. D. Shipman and R. M. Bradley, Phys. Rev. B 84, 085420 (2011)]. We investigate the influence of initial conditions on the hexagonal order yielded by integration of those equations of motion. The initial conditions studied are hexagonal and sinusoidal templates, straight scratches and nominally flat surfaces. Our simulations indicate that both kinds of template lead to marked improvements in the hexagonal order if the initial wavelength is approximately equal to or double the linearly selected wavelength. Scratches enhance the hexagonal order in their vicinity if their width is close to or less than the linearly selected wavelength. Our results suggest that prepatterning a binary material can dramatically increase the hexagonal order achieved at large ion fluences. △ Less

Submitted 4 November, 2015; originally announced November 2015.

Comments: 23 pages, 16 captioned figures

Estimating the power spectrum covariance matrix with fewer mock samples

Authors: David W. Pearson, Lado Samushia

Abstract: The covariance matrices of power-spectrum (P(k)) measurements from galaxy surveys are difficult to compute theoretically. The current best practice is to estimate covariance matrices by computing a sample covariance of a large number of mock catalogues. The next generation of galaxy surveys will require thousands of large volume mocks to determine the covariance matrices to desired accuracy. The e… ▽ More The covariance matrices of power-spectrum (P(k)) measurements from galaxy surveys are difficult to compute theoretically. The current best practice is to estimate covariance matrices by computing a sample covariance of a large number of mock catalogues. The next generation of galaxy surveys will require thousands of large volume mocks to determine the covariance matrices to desired accuracy. The errors in the inverse covariance matrix are larger and scale with the number of P(k) bins, making the problem even more acute. We develop a method of estimating covariance matrices using a theoretically justified, few-parameter model, calibrated with mock catalogues. Using a set of 600 BOSS DR11 mock catalogues, we show that a seven parameter model is sufficient to fit the covariance matrix of BOSS DR11 P(k) measurements. The covariance computed with this method is better than the sample covariance at any number of mocks and only ~100 mocks are required for it to fully converge and the inverse covariance matrix converges at the same rate. This method should work equally well for the next generation of galaxy surveys, although a demand for higher accuracy may require adding extra parameters to the fitting function. △ Less

Submitted 31 August, 2015; originally announced September 2015.

Comments: 7 pages, 7 figures

Planck 2013 results. XXXI. Consistency of the Planck data

Authors: Planck Collaboration, P. A. R. Ade, M. Arnaud, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, E. Battaner, K. Benabed, A. Benoit-Levy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. R. Bond, J. Borrill, F. R. Bouchet, C. Burigana, J. -F. Cardoso, A. Catalano, A. Challinor, A. Chamballu, H. C. Chiang, R. Christensen, D. L. Clements, S. Colombi , et al. (158 additional authors not shown)

Abstract: The Planck design and scanning strategy provide many levels of redundancy that can be exploited to provide tests of internal consistency. One of the most important is the comparison of the 70GHz and 100GHz channels. Based on different instrument technologies, with feeds located differently in the focal plane, analysed independently by different teams using different software, and near the minimum… ▽ More The Planck design and scanning strategy provide many levels of redundancy that can be exploited to provide tests of internal consistency. One of the most important is the comparison of the 70GHz and 100GHz channels. Based on different instrument technologies, with feeds located differently in the focal plane, analysed independently by different teams using different software, and near the minimum of diffuse foreground emission, these channels are in effect two different experiments. The 143GHz channel has the lowest noise level on Planck, and is near the minimum of unresolved foreground emission. In this paper, we analyse the level of consistency achieved in the 2013 Planck data. We concentrate on comparisons between the 70/100/143GHz channel maps and power spectra, particularly over the angular scales of the first and second acoustic peaks, on maps masked for diffuse Galactic emission and for strong unresolved sources. Difference maps covering angular scales from 8deg-15arcmin are consistent with noise, and show no evidence of cosmic microwave background structure. Including small but important corrections for unresolved-source residuals, we demonstrate agreement between 70 and 100GHz power spectra averaged over 70<l<390 at the 0.8% level, and agreement between 143 and 100GHz power spectra of 0.4% over the same l range. These values are within and consistent with the overall uncertainties in calibration given in the Planck 2013 results. We also present results based on the 2013 likelihood analysis showing consistency at the 0.35% between the 100/143/217GHz power spectra. We analyse calibration procedures and beams to determine what fraction of these differences can be accounted for by known approximations or systematic errors that could be controlled even better in the future, reducing uncertainties still further. Several possible small improvements are described...(abridged) △ Less

Submitted 13 August, 2015; originally announced August 2015.

Comments: 27 pages, 27 figures, version matches accepted and published in A&A, 2014, Vol 571, A31, Corresponding author: Charles Lawrence

Journal ref: Astronomy and Astrophysics, 2014, 571, A31

The extent of gravitationally bound structure in a ΛCDM universe

Authors: David W. Pearson

Abstract: A new analytical model for constraining the extent of gravitationally bound structure in the Universe is presented. This model is based on a simple modification of the spherical collapse model (SCM), and its performance in predicting the limits of bound structure in N-body simulations is compared to that of two previous models with the aid of new software named COLDGaS-- compute unified device arc… ▽ More A new analytical model for constraining the extent of gravitationally bound structure in the Universe is presented. This model is based on a simple modification of the spherical collapse model (SCM), and its performance in predicting the limits of bound structure in N-body simulations is compared to that of two previous models with the aid of new software named COLDGaS-- compute unified device architecture (CUDA) object location determination in GADGET2 snapshots -- which was developed by the author. All of these models can be distilled down to a single unique parameter ξ, here named the critical parameter, which was found to have values of 3 and 1.18 from the previous studies, and a value of 1.89 from the modified SCM. While still on the conservative side, this new model tends to better identify what structure is gravitationally bound in simulations. All three analytical models are applied to the Corona Borealis supercluster, with the modified SCM and ξ = 1.18 model making predictions that are in agreement with recent work showing that A2056, A2061, A2065, A2067, and A2089 comprise a gravitationally bound supercluster. As an additional test, the modified SCM is used to estimate the mass within the turn around radius of the Virgo cluster, providing results in good agreement with studies relating the virial mass of clusters to the total mass within turn around. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Comments: 11 pages, 6 figures

An Application of Value Distribution Theory to Schroedinger Operators with Absolutely Continuous Spectrum

Authors: Charles Fulton, David Pearson, Steven Pruess

Abstract: We use the "Value Distribution" theory developed by Pearson and Breimesser to obtain a sequence of functions in the eigenvalue parameter for some Sturm-Liouville problems which have the property of being "uniformly asymptotically distributed". We use the "Value Distribution" theory developed by Pearson and Breimesser to obtain a sequence of functions in the eigenvalue parameter for some Sturm-Liouville problems which have the property of being "uniformly asymptotically distributed". △ Less

Submitted 14 December, 2014; originally announced December 2014.

Comments: 10 pages

MSC Class: 34B20

Error and unsharpness in approximate joint measurements of position and momentum

Authors: Paul Busch, David B Pearson

Abstract: In recent years, novel quantifications of measurement error in quantum mechanics have for the first time enabled precise formulations of Heisenberg's famous but often challenged measurement uncertainty relation. These relations take the form of a trade-off for the necessary errors in joint approximate measurements of position and momentum and other incompatible pairs of observables. Here we review… ▽ More In recent years, novel quantifications of measurement error in quantum mechanics have for the first time enabled precise formulations of Heisenberg's famous but often challenged measurement uncertainty relation. These relations take the form of a trade-off for the necessary errors in joint approximate measurements of position and momentum and other incompatible pairs of observables. Here we review some of these error measures, examine their properties and suitability, and compare their relative strengths as criteria for "good" approximations. △ Less

Submitted 27 May, 2014; originally announced May 2014.

MSC Class: 81P15

The Largest Gravitationally Bound Structures: The Corona Borealis Supercluster - Mass and Bound Extent

Authors: David W. Pearson, Merida Batiste, David J. Batuski

Abstract: Recent simulations of the densest portion of the Corona Borealis supercluster (A2061, A2065, A2067, and A2089) have shown virtually no possibility of extended gravitationally bound structure without inter-cluster matter (Pearson & Batuski). In contrast, recent analyses of the dynamics found that the clusters had significant peculiar velocities towards the supercluster centroid (Batiste & Batuski).… ▽ More Recent simulations of the densest portion of the Corona Borealis supercluster (A2061, A2065, A2067, and A2089) have shown virtually no possibility of extended gravitationally bound structure without inter-cluster matter (Pearson & Batuski). In contrast, recent analyses of the dynamics found that the clusters had significant peculiar velocities towards the supercluster centroid (Batiste & Batuski). In this paper we present the results of a thorough investigation of the CSC: we determine redshifts and virial masses for all 8 clusters associated with the CSC; repeat the analysis of Batiste & Batuski with the inclusion of A2056 and CL1529+29; estimate the mass of the supercluster by applying the virial theorem on the supercluster scale (e.g. Small et al.), the caustics method (e.g. Reisenegger et al.), and a new procedure using the spherical collapse model (SCM) with the results of the dynamical analysis (SCM+FP); and perform a series of simulations to assess the likelihood of the CSC being a gravitationally bound supercluster. We find that the mass of the CSC is between 0.6 and 12 x 10^{16} h^{-1} M_{sun}. The dynamical analysis, caustics method and the SCM+FP indicate that the structure is collapsing, with the latter two both indicating a turn around radius of about 12.5 h^{-1} Mpc. Lastly, the simulations show that with a reasonable amount of inter-cluster mass, there is likely extended bound structure in the CSC. Our results suggest that A2056, A2061, A2065, A2067, and A2089 form a gravitationally bound supercluster. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Locating Bound Structure in an Accelerating Universe

Authors: David W. Pearson, David J. Batuski

Abstract: Given the overwhelming evidence that the universe is currently undergoing an accelerated expansion, the question of what are the largest gravitationally bound structures remains. A couple of groups, Busha et al. 2003 (B03) and Dunner et al. 2006 (D06), have attempted to analytically define these limits, arriving at substantially different estimates due to differences in their assumptions about the… ▽ More Given the overwhelming evidence that the universe is currently undergoing an accelerated expansion, the question of what are the largest gravitationally bound structures remains. A couple of groups, Busha et al. 2003 (B03) and Dunner et al. 2006 (D06), have attempted to analytically define these limits, arriving at substantially different estimates due to differences in their assumptions about the velocities at the present epoch. In an effort to locate the largest bound structures in the universe, we selected the Aquarius (ASC), Microscopium (MSC), Corona Borealis (CBSC), and Shapley (SSC) superclusters for study, due to their high number density of rich Abell clusters. Simple N-body simulations, which assumed negligible intercluster mass, were used to assess the likelihood of these structures being gravitationally bound, and the predictions of the models of B03 and D06 were compared with those results. We find that ASC, and MSC contain pairs of clusters which are gravitationally bound, A2541/A2546 and A3695/A3696 respectively, with no other structures having a significant chance of being bound. For SSC, we find a group of five clusters, A3554, A3556, A3558, A3560, and A3562 that are bound, with an additional pair, A1736/A3559, having a slight chance of being bound. We find that CBSC has no extended bound structure, contrary to the findings of Small et al. 1998, who claim that the entire supercluster is bound. In regards to the analytical models, we find that B03 will identify structure that is definitely bound, but tends to underestimate the true extent of the structure, while D06 will identify all structure that is bound while overestimating its extent. Combined, the two models can provide lower and upper limits to the extent of bound structures so long as there are no other significant structures nearby or no significant dark matter exterior to the clusters. △ Less

Submitted 23 August, 2013; originally announced August 2013.

In-flight calibration and verification of the Planck-LFI instrument

Authors: Anna Gregorio, Francesco Cuttaia, Aniello Mennella, Marco Bersanelli, Michele Maris, Peter Meinhold, Maura Sandri, Luca Terenzi, Maurizio Tomasi, Fabrizio Villa, Marco Frailis, Gianluca Morgante, Dave Pearson, Andrea Zacchei, Paola Battaglia, Reginald Christophe Butler, Richard Davis, Cristian Franceschet, Enrico Franceschi, Samuele Galeotta, Rodrigo Leonardi, Steve Lowe, Nazzareno Mandolesi, Frederick Melot, Luis Mendes , et al. (18 additional authors not shown)

Abstract: In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance… ▽ More In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance assessment and the thermal susceptibility tests. The logic, sequence, goals and results of the in-flight tests are discussed. All the calibration activities were successfully carried out and the instrument response was comparable to the one observed on ground. For some channels the in-flight tuning activity allowed us to improve significantly the noise performance. △ Less

Submitted 8 July, 2013; originally announced July 2013.

Comments: Long technical paper on Planck LFI in flight calibration campaign: 109 pages in this (not final) version, 100 page in the final JINST version

MSC Class: 85-05 (primary) ACM Class: B.4.4; B.8.0; J.2

Journal ref: A Gregorio et al 2013 JINST 8 T07001

Algorithms for estimating spectral density functions for periodic potentials on the half line

Authors: Charles Fulton, David Pearson, Steven Pruess

Abstract: For Hill's equation on [0,infinity) we prove new characterizations of the spectral function rho(lambda) and the spectral density function f(lambda) based on analysis involving a companion system of first order differential equations in [6,7]. A numerical algorithm is derived and implemented based on coefficient approximation. Results for several examples, including the Mathieu equation, are presen… ▽ More For Hill's equation on [0,infinity) we prove new characterizations of the spectral function rho(lambda) and the spectral density function f(lambda) based on analysis involving a companion system of first order differential equations in [6,7]. A numerical algorithm is derived and implemented based on coefficient approximation. Results for several examples, including the Mathieu equation, are presented. △ Less

Submitted 23 March, 2013; originally announced March 2013.

MSC Class: Numerical Analysis

Planck 2013 results. XVI. Cosmological parameters

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, C. Armitage-Caplan, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, J. G. Bartlett, E. Battaner, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. Bobin, J. J. Bock, A. Bonaldi, J. R. Bond, J. Borrill, F. R. Bouchet , et al. (239 additional authors not shown)

Abstract: We present the first results based on Planck measurements of the CMB temperature and lensing-potential power spectra. The Planck spectra at high multipoles are extremely well described by the standard spatially-flat six-parameter LCDM cosmology. In this model Planck data determine the cosmological parameters to high precision. We find a low value of the Hubble constant, H0=67.3+/-1.2 km/s/Mpc and… ▽ More We present the first results based on Planck measurements of the CMB temperature and lensing-potential power spectra. The Planck spectra at high multipoles are extremely well described by the standard spatially-flat six-parameter LCDM cosmology. In this model Planck data determine the cosmological parameters to high precision. We find a low value of the Hubble constant, H0=67.3+/-1.2 km/s/Mpc and a high value of the matter density parameter, Omega_m=0.315+/-0.017 (+/-1 sigma errors) in excellent agreement with constraints from baryon acoustic oscillation (BAO) surveys. Including curvature, we find that the Universe is consistent with spatial flatness to percent-level precision using Planck CMB data alone. We present results from an analysis of extensions to the standard cosmology, using astrophysical data sets in addition to Planck and high-resolution CMB data. None of these models are favoured significantly over standard LCDM. The deviation of the scalar spectral index from unity is insensitive to the addition of tensor modes and to changes in the matter content of the Universe. We find a 95% upper limit of r<0.11 on the tensor-to-scalar ratio. There is no evidence for additional neutrino-like relativistic particles. Using BAO and CMB data, we find N_eff=3.30+/-0.27 for the effective number of relativistic degrees of freedom, and an upper limit of 0.23 eV for the summed neutrino mass. Our results are in excellent agreement with big bang nucleosynthesis and the standard value of N_eff=3.046. We find no evidence for dynamical dark energy. Despite the success of the standard LCDM model, this cosmology does not provide a good fit to the CMB power spectrum at low multipoles, as noted previously by the WMAP team. While not of decisive significance, this is an anomaly in an otherwise self-consistent analysis of the Planck temperature data. △ Less

Submitted 20 March, 2014; v1 submitted 20 March, 2013; originally announced March 2013.

Comments: 69 pages. Matches version to appear in Astronomy & Astrophysics

Planck 2013 results. V. LFI calibration

Authors: Planck Collaboration, N. Aghanim, C. Armitage-Caplan, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, E. Battaner, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. Bobin, J. J. Bock, A. Bonaldi, L. Bonavera, J. R. Bond, J. Borrill, F. R. Bouchet, M. Bridges , et al. (195 additional authors not shown)

Abstract: We discuss the methods employed to photometrically calibrate the data acquired by the Low Frequency Instrument on Planck. Our calibration is based on a combination of the Orbital Dipole plus the Solar Dipole, caused respectively by the motion of the Planck spacecraft with respect to the Sun and by motion of the Solar System with respect to the CMB rest frame. The latter provides a signal of a few… ▽ More We discuss the methods employed to photometrically calibrate the data acquired by the Low Frequency Instrument on Planck. Our calibration is based on a combination of the Orbital Dipole plus the Solar Dipole, caused respectively by the motion of the Planck spacecraft with respect to the Sun and by motion of the Solar System with respect to the CMB rest frame. The latter provides a signal of a few mK with the same spectrum as the CMB anisotropies and is visible throughout the mission. In this data release we rely on the characterization of the Solar Dipole as measured by WMAP. We also present preliminary results (at 44GHz only) on the study of the Orbital Dipole, which agree with the WMAP value of the Solar System speed within our uncertainties. We compute the calibration constant for each radiometer roughly once per hour, in order to keep track of changes in the detectors' gain. Since non-idealities in the optical response of the beams proved to be important, we implemented a fast convolution algorithm which considers the full beam response in estimating the signal generated by the dipole. Moreover, in order to further reduce the impact of residual systematics due to sidelobes, we estimated time variations in the calibration constant of the 30GHz radiometers (the ones with the largest sidelobes) using the signal of a reference load. We have estimated the calibration accuracy in two ways: we have run a set of simulations to assess the impact of statistical errors and systematic effects in the instrument and in the calibration procedure, and we have performed a number of consistency checks on the data and on the brightness temperature of Jupiter. Calibration errors for this data release are expected to be about 0.6% at 44 and 70 GHz, and 0.8% at 30 GHz. (Abriged.) △ Less

Submitted 20 August, 2014; v1 submitted 20 March, 2013; originally announced March 2013.

Comments: 29 pages, 23 figures, 12 tables, 1 appendix - New version submitted to A&A

Journal ref: A&A 571, A5 (2014)

Planck 2013 results. III. LFI systematic uncertainties

Authors: Planck Collaboration, N. Aghanim, C. Armitage-Caplan, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, E. Battaner, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, J. Bobin, J. J. Bock, A. Bonaldi, L. Bonavera, J. R. Bond, J. Borrill, F. R. Bouchet, M. Bridges , et al. (195 additional authors not shown)

Abstract: We present the current estimate of instrumental and systematic effect uncertainties for the Planck-Low Frequency Instrument relevant to the first release of the Planck cosmological results. We give an overview of the main effects and of the tools and methods applied to assess residuals in maps and power spectra. We also present an overall budget of known systematic effect uncertainties, which are… ▽ More We present the current estimate of instrumental and systematic effect uncertainties for the Planck-Low Frequency Instrument relevant to the first release of the Planck cosmological results. We give an overview of the main effects and of the tools and methods applied to assess residuals in maps and power spectra. We also present an overall budget of known systematic effect uncertainties, which are dominated sidelobe straylight pick-up and imperfect calibration. However, even these two effects are at least two orders of magnitude weaker than the cosmic microwave background (CMB) fluctuations as measured in terms of the angular temperature power spectrum. A residual signal above the noise level is present in the multipole range $\ell<20$, most notably at 30 GHz, and is likely caused by residual Galactic straylight contamination. Current analysis aims to further reduce the level of spurious signals in the data and to improve the systematic effects modelling, in particular with respect to straylight and calibration uncertainties. △ Less

Submitted 27 March, 2014; v1 submitted 20 March, 2013; originally announced March 2013.

Comments: Accepted for publication by A&A

Journal ref: A&A 571, A3 (2014)

Planck 2013 results. I. Overview of products and scientific results

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, M. I. R. Alves, C. Armitage-Caplan, M. Arnaud, M. Ashdown, F. Atrio-Barandela, J. Aumont, H. Aussel, C. Baccigalupi, A. J. Banday, R. B. Barreiro, R. Barrena, M. Bartelmann, J. G. Bartlett, N. Bartolo, S. Basak, E. Battaner, R. Battye, K. Benabed, A. Benoît, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli , et al. (376 additional authors not shown)

Abstract: The ESA's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14 May 2009 and has been scanning the microwave and submillimetre sky continuously since 12 August 2009. This paper gives an overview of the mission and its performance, the processing, analysis, and characteristics of the data, the scientific results, and the science data products and p… ▽ More The ESA's Planck satellite, dedicated to studying the early Universe and its subsequent evolution, was launched 14 May 2009 and has been scanning the microwave and submillimetre sky continuously since 12 August 2009. This paper gives an overview of the mission and its performance, the processing, analysis, and characteristics of the data, the scientific results, and the science data products and papers in the release. The science products include maps of the CMB and diffuse extragalactic foregrounds, a catalogue of compact Galactic and extragalactic sources, and a list of sources detected through the SZ effect. The likelihood code used to assess cosmological models against the Planck data and a lensing likelihood are described. Scientific results include robust support for the standard six-parameter LCDM model of cosmology and improved measurements of its parameters, including a highly significant deviation from scale invariance of the primordial power spectrum. The Planck values for these parameters and others derived from them are significantly different from those previously determined. Several large-scale anomalies in the temperature distribution of the CMB, first detected by WMAP, are confirmed with higher confidence. Planck sets new limits on the number and mass of neutrinos, and has measured gravitational lensing of CMB anisotropies at greater than 25 sigma. Planck finds no evidence for non-Gaussianity in the CMB. Planck's results agree well with results from the measurements of baryon acoustic oscillations. Planck finds a lower Hubble constant than found in some more local measures. Some tension is also present between the amplitude of matter fluctuations derived from CMB data and that derived from SZ data. The Planck and WMAP power spectra are offset from each other by an average level of about 2% around the first acoustic peak. △ Less

Submitted 5 June, 2014; v1 submitted 20 March, 2013; originally announced March 2013.

Estimating Spectral Density Functions for Sturm-Liouville problems with two singular endpoints

Authors: Charles Fulton, David Pearson, Steven Pruess

Abstract: In this paper we consider the Sturm-Liouville equation -y"+qy = lambda*y on the half line (0,infinity) under the assumptions that x=0 is a regular singular point and nonoscillatory for all real lambda, and that either (i) q is L_1 near x=infinity, or (ii) q' is L_1 near infinity with q(x) --> 0 as x --> infinity, so that there is absolutely continuous spectrum in (0,infinity). Characterizations of… ▽ More In this paper we consider the Sturm-Liouville equation -y"+qy = lambda*y on the half line (0,infinity) under the assumptions that x=0 is a regular singular point and nonoscillatory for all real lambda, and that either (i) q is L_1 near x=infinity, or (ii) q' is L_1 near infinity with q(x) --> 0 as x --> infinity, so that there is absolutely continuous spectrum in (0,infinity). Characterizations of the spectral density function for this doubly singular problem, similar to those obtained in [12] and [13] (when the left endpoint is regular) are established; corresponding approximants from the two algorithms in [12] and [13] are then utilized, along with the Frobenius recurrence relations and piecewise trigonometric - hyperbolic splines, to generate numerical approximations to the spectral density function associated with the doubly singular problem on (0,infinity). In the case of the radial part of the separated hydrogen atom problem, the new algorithms are capable of achieving near machine precision accuracy over the range of lambda from 0.1 to 10000, accuracies which could not be achieved using the SLEDGE software package. △ Less

Submitted 12 March, 2013; originally announced March 2013.

MSC Class: 65L15; 34B20; 34B24; 34B30

The effect of changing electrode metal on solution-processed flexible titanium dioxide memristors

Authors: Ella Gale, David Pearson, Stephen Kitson, Andrew Adamatzky, Ben de Lacy Costello

Abstract: Flexible solution processed memristors show different behaviour dependent on the choice of electrode material. Use of gold for both electrodes leads to switchable WORM (Write Once Read Many times) resistive devices. Use of aluminium for both electrodes increases the richness of behaviour allowing both curved and triangular memristive switching resistance memories. A comparison device with an alumi… ▽ More Flexible solution processed memristors show different behaviour dependent on the choice of electrode material. Use of gold for both electrodes leads to switchable WORM (Write Once Read Many times) resistive devices. Use of aluminium for both electrodes increases the richness of behaviour allowing both curved and triangular memristive switching resistance memories. A comparison device with an aluminium bottom electrode and gold top electrode only exhibited significant memristive resistance switching when the aluminium electrode was the cathode, suggesting that the electrode is acting as a source/sink of oxygen anions. When the gold electrode was the cathode this electrode was deformed by oxygen evolution. These results demonstrate that aluminium is helpful for stabilising and promoting memristive behaviour in sol-gel TiO$_2$ devices and that changing electrodes from aluminium to gold creates fundamentally different device characteristics. △ Less

Submitted 22 December, 2013; v1 submitted 30 June, 2011; originally announced June 2011.

Comments: 29 pages, 17 figures, 4 tables

Planck Early Results. V. The Low Frequency Instrument data processing

Authors: A. Zacchei, D. Maino, C. Baccigalupi, M. Bersanelli, A. Bonaldi, L. Bonavera, C. Burigana, R. C. Butler, F. Cuttaia, G. de Zotti, J. Dick, M. Frailis, S. Galeotta, J. González-Nuevo, K. M. Górski, A. Gregorio, E. Keihänen, R. Keskitalo, J. Knoche, H. Kurki-Suonio, C. R. Lawrence, S. Leach, J. P. Leahy, M. López-Caniego, N. Mandolesi , et al. (124 additional authors not shown)

Abstract: We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic… ▽ More We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic microwave background radiation induced by the motion of the spacecraft. Noise properties are estimated from TOD from which the sky signal has been removed using a generalized least square map-making algorithm. Measured 1/f noise knee-frequencies range from 100mHz at 30GHz to a few tens of mHz at 70GHz. A destri** code (Madam) is employed to combine radiometric data and pointing information into sky maps, minimizing the variance of correlated noise. Noise covariance matrices required to compute statistical uncertainties on LFI and Planck products are also produced. Main beams are estimated down to the approx -10dB level using Jupiter transits, which are also used for geometrical calibration of the focal plane. △ Less

Submitted 7 December, 2011; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: A&A Volume 536, December 2011 Planck early results

Planck early results. III. First assessment of the Low Frequency Instrument in-flight performance

Authors: A. Mennella, M. Bersanelli, R. C. Butler, A. Curto, F. Cuttaia, R. J. Davis, J. Dick, M. Frailis, S. Galeotta, A. Gregorio, H. Kurki-Suonio, C. R. Lawrence, S. Leach, J. P. Leahy, S. Lowe, D. Maino, N. Mandolesi, M. Maris, E. Martínez-González, P. R. Meinhold, G. Morgante, D. Pearson, F. Perrotta, G. Polenta, T. Poutanen , et al. (136 additional authors not shown)

Abstract: The scientific performance of the Planck Low Frequency Instrument (LFI) after one year of in-orbit operation is presented. We describe the main optical parameters and discuss photometric calibration, white noise sensitivity, and noise properties. A preliminary evaluation of the impact of the main systematic effects is presented. For each of the performance parameters, we outline the methods used t… ▽ More The scientific performance of the Planck Low Frequency Instrument (LFI) after one year of in-orbit operation is presented. We describe the main optical parameters and discuss photometric calibration, white noise sensitivity, and noise properties. A preliminary evaluation of the impact of the main systematic effects is presented. For each of the performance parameters, we outline the methods used to obtain them from the flight data and provide a comparison with pre-launch ground assessments, which are essentially confirmed in flight. △ Less

Submitted 19 December, 2011; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: Published version

Journal ref: A&A Vol 536, A3 (Dec 2011)

Planck Early Results. II. The thermal performance of Planck

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, M. Arnaud, M. Ashdown, J. Aumont, C. Baccigalupi, M. Baker, A. Balbi, A. J. Banday, R. B. Barreiro, E. Battaner, K. Benabed, A. Benoit, J. P. Bernard, M. Bersanelli, P. Bhandari, R. Bhatia, J. J. Bock, A. Bonaldi, J. R. Bond, J. Borders, J. Borrill, F. R. Bouchet, B. Bowman , et al. (203 additional authors not shown)

Abstract: The performance of the Planck instruments in space is enabled by their low operating temperatures, 20K for LFI and 0.1K for HFI, achieved through a combination of passive radiative cooling and three active mechanical coolers. The scientific requirement for very broad frequency coverage led to two detector technologies with widely different temperature and cooling needs. Active coolers could satisf… ▽ More The performance of the Planck instruments in space is enabled by their low operating temperatures, 20K for LFI and 0.1K for HFI, achieved through a combination of passive radiative cooling and three active mechanical coolers. The scientific requirement for very broad frequency coverage led to two detector technologies with widely different temperature and cooling needs. Active coolers could satisfy these needs; a helium cryostat, as used by previous cryogenic space missions (IRAS, COBE, ISO, Spitzer, AKARI), could not. Radiative cooling is provided by three V-groove radiators and a large telescope baffle. The active coolers are a hydrogen sorption cooler (<20K), a 4He Joule-Thomson cooler (4.7K), and a 3He-4He dilution cooler (1.4K and 0.1K). The flight system was at ambient temperature at launch and cooled in space to operating conditions. The HFI bolometer plate reached 93mK on 3 July 2009, 50 days after launch. The solar panel always faces the Sun, shadowing the rest of Planck, andoperates at a mean temperature of 384K. At the other end of the spacecraft, the telescope baffle operates at 42.3K and the telescope primary mirror operates at 35.9K. The temperatures of key parts of the instruments are stabilized by both active and passive methods. Temperature fluctuations are driven by changes in the distance from the Sun, sorption cooler cycling and fluctuations in gas-liquid flow, and fluctuations in cosmic ray flux on the dilution and bolometer plates. These fluctuations do not compromise the science data. △ Less

Submitted 2 January, 2012; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: Accepted by A&A. Also available at http://www.rssd.esa.int

Report number: Planck Collaboration 2011b. / Planck2011-1.3

Planck Early Results: The Planck mission

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, M. Arnaud, M. Ashdown, J. Aumont, C. Baccigalupi, M. Baker, A. Balbi, A. J. Banday, R. B. Barreiro, J. G. Bartlett, E. Battaner, K. Benabed, K. Bennett, A. Benoît, J. -P. Bernard, M. Bersanelli, R. Bhatia, J. J. Bock, A. Bonaldi, J. R. Bond, J. Borrill, F. R. Bouchet, T. Bradshaw , et al. (250 additional authors not shown)

Abstract: The European Space Agency's Planck satellite was launched on 14 May 2009, and has been surveying the sky stably and continuously since 13 August 2009. Its performance is well in line with expectations, and it will continue to gather scientific data until the end of its cryogenic lifetime. We give an overview of the history of Planck in its first year of operations, and describe some of the key per… ▽ More The European Space Agency's Planck satellite was launched on 14 May 2009, and has been surveying the sky stably and continuously since 13 August 2009. Its performance is well in line with expectations, and it will continue to gather scientific data until the end of its cryogenic lifetime. We give an overview of the history of Planck in its first year of operations, and describe some of the key performance aspects of the satellite. This paper is part of a package submitted in conjunction with Planck's Early Release Compact Source Catalogue, the first data product based on Planck to be released publicly. The package describes the scientific performance of the Planck payload, and presents results on a variety of astrophysical topics related to the sources included in the Catalogue, as well as selected topics on diffuse emission. △ Less

Submitted 16 June, 2011; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: This is part of a package of Planck papers labelled in their titles as "Planck Early Results". The whole package can also be downloaded from http://www.rssd.esa.int/Planck. This paper was accepted by Astronomy & Astrophysics on 31 May 2011

Cryogenic characterization of the Planck sorption cooler system flight model

Authors: G. Morgante, D. Pearson, F. Melot, P. Stassi, L. Terenzi, P. Wilson, B. Hernandez, L. Wade, A. Gregorio, M. Bersanelli, C. Butler, N. Mandolesi

Abstract: This paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/1748-0221 Two continuous closed-cycle hydrogen Joule-Thomson (J-T) sorption coolers have been fabricated and assembled by the Jet Propulsion Laboratory (JPL) for the European Space Agency (ESA) Planck mission. Each refrigerator has been designed to provide a total of ~ 1W o… ▽ More This paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/1748-0221 Two continuous closed-cycle hydrogen Joule-Thomson (J-T) sorption coolers have been fabricated and assembled by the Jet Propulsion Laboratory (JPL) for the European Space Agency (ESA) Planck mission. Each refrigerator has been designed to provide a total of ~ 1W of cooling power at two instrument interfaces: they directly cool the Planck Low Frequency Instrument (LFI) around 20K while providing a pre-cooling stage for a 4 K J-T mechanical refrigerator for the High Frequency Instrument (HFI). After sub-system level validation at JPL, the cryocoolers have been delivered to ESA in 2005. In this paper we present the results of the cryogenic qualification and test campaigns of the Nominal Unit on the flight model spacecraft performed at the CSL (Centre Spatial de Liege) facilities in 2008. Test results in terms of input power, cooling power, temperature, and temperature fluctuations over the flight allowable ranges for these interfaces are reported and analyzed with respect to mission requirements. △ Less

Submitted 26 January, 2010; originally announced January 2010.

Comments: This is an author-created, un-copyedited version of an article accepted for publication in Journal of Instrumentation. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The definitive publisher authenticated version is available online at 10.1088/1748-0221/4/12/T12016

Journal ref: G Morgante et al 2009 JINST 4 T12016

Planck pre-launch status: Design and description of the Low Frequency Instrument

Authors: M. Bersanelli, N. Mandolesi, R. C. Butler, A. Mennella, F. Villa, B. Aja, E. Artal, E. Artina, C. Baccigalupi, M. Balasini, G. Baldan, A. Banday, P. Bastia, P. Battaglia, T. Bernardino, E. Blackhurst, L. Boschini, C. Burigana, G. Cafagna, B. Cappellini, F. Cavaliere, F. Colombo, G. Crone, F. Cuttaia, O. D'Arcangelo , et al. (87 additional authors not shown)

Abstract: In this paper we present the Low Frequency Instrument (LFI), designed and developed as part of the Planck space mission, the ESA program dedicated to precision imaging of the cosmic microwave background (CMB). Planck-LFI will observe the full sky in intensity and polarisation in three frequency bands centred at 30, 44 and 70 GHz, while higher frequencies (100-850 GHz) will be covered by the HFI… ▽ More In this paper we present the Low Frequency Instrument (LFI), designed and developed as part of the Planck space mission, the ESA program dedicated to precision imaging of the cosmic microwave background (CMB). Planck-LFI will observe the full sky in intensity and polarisation in three frequency bands centred at 30, 44 and 70 GHz, while higher frequencies (100-850 GHz) will be covered by the HFI instrument. The LFI is an array of microwave radiometers based on state-of-the-art Indium Phosphide cryogenic HEMT amplifiers implemented in a differential system using blackbody loads as reference signals. The front-end is cooled to 20K for optimal sensitivity and the reference loads are cooled to 4K to minimise low frequency noise. We provide an overview of the LFI, discuss the leading scientific requirements and describe the design solutions adopted for the various hardware subsystems. The main drivers of the radiometric, optical and thermal design are discussed, including the stringent requirements on sensitivity, stability, and rejection of systematic effects. Further details on the key instrument units and the results of ground calibration are provided in a set of companion papers. △ Less

Submitted 19 January, 2010; originally announced January 2010.

Comments: 23 pages, 31 figures, accepted by Astronomy and Astrophysics, Planck LFI technical papers published by JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/1748-0221

Planck pre-launch status: the Planck-LFI programme

Authors: N. Mandolesi, M. Bersanelli, R. C. Butler, E. Artal, C. Baccigalupi, A. Balbi, A. J. Banday, R. B. Barreiro, M. Bartelmann, K. Bennett, P. Bhandari, A. Bonaldi, J. Borrill, M. Bremer, C. Burigana, R. C. Bowman, P. Cabella, C. Cantalupo, B. Cappellini, T. Courvoisier, G. Crone, F. Cuttaia, L. Danese, O. D'Arcangelo, R. D. Davies , et al. (118 additional authors not shown)

Abstract: This paper provides an overview of the Low Frequency Instrument (LFI) programme within the ESA Planck mission. The LFI instrument has been developed to produce high precision maps of the microwave sky at frequencies in the range 27-77 GHz, below the peak of the cosmic microwave background (CMB) radiation spectrum. The scientific goals are described, ranging from fundamental cosmology to Galactic… ▽ More This paper provides an overview of the Low Frequency Instrument (LFI) programme within the ESA Planck mission. The LFI instrument has been developed to produce high precision maps of the microwave sky at frequencies in the range 27-77 GHz, below the peak of the cosmic microwave background (CMB) radiation spectrum. The scientific goals are described, ranging from fundamental cosmology to Galactic and extragalactic astrophysics. The instrument design and development are outlined, together with the model philosophy and testing strategy. The instrument is presented in the context of the Planck mission. The LFI approach to ground and inflight calibration is described. We also describe the LFI ground segment. We present the results of a number of tests demonstrating the capability of the LFI data processing centre (DPC) to properly reduce and analyse LFI flight data, from telemetry information to calibrated and cleaned time ordered data, sky maps at each frequency (in temperature and polarization), component emission maps (CMB and diffuse foregrounds), catalogs for various classes of sources (the Early Release Compact Source Catalogue and the Final Compact Source Catalogue). The organization of the LFI consortium is briefly presented as well as the role of the core team in data analysis and scientific exploitation. All tests carried out on the LFI flight model demonstrate the excellent performance of the instrument and its various subunits. The data analysis pipeline has been tested and its main steps verified. In the first three months after launch, the commissioning, calibration, performance, and verification phases will be completed, after which Planck will begin its operational life, in which LFI will have an integral part. △ Less

Submitted 15 January, 2010; originally announced January 2010.

Comments: 25 pages, 16 figures. In press on Astronomy and Astrophysics

Nucleosynthetic osmium isotope anomalies in acid leachates of the Murchison meteorite

Authors: L. Reisberg, N. Dauphas, A. Luguet, D. G. Pearson, R. Gallino, C. Zimmermann

Abstract: We present osmium isotopic results obtained by sequential leaching of the Murchison meteorite, which reveal the existence of very large internal anomalies of nucleosynthetic origin. The Os isotopic anomalies are correlated, and can be explained by the variable contributions of components derived from the s, r and p-processes of nucleosynthesis. Much of the s-process rich osmium is released by re… ▽ More We present osmium isotopic results obtained by sequential leaching of the Murchison meteorite, which reveal the existence of very large internal anomalies of nucleosynthetic origin. The Os isotopic anomalies are correlated, and can be explained by the variable contributions of components derived from the s, r and p-processes of nucleosynthesis. Much of the s-process rich osmium is released by relatively mild leaching, suggesting the existence of an easily leachable s-process rich presolar phase, or alternatively, of a chemically resistant r-process rich phase. The s-process composition of Os released by mild leaching diverges slightly from that released by aggressive digestion techniques, perhaps suggesting that the presolar phases attacked by these differing procedures condensed in different stellar environments. The correlation between 190Os and 188Os can be used to constrain the s-process 190Os/188Os ratio to be 1.275 pm 0.043. Such a ratio can be reproduced in a nuclear reaction network for a MACS value for 190Os of ~200 pm 22 mbarn at 30 keV. We also present evidence for extensive internal variation of 184Os abundances in the Murchison meteorite. This suggests that p process rich presolar grains (e.g., supernova condensates) may be present in meteorites in sufficient quantities to influence the Os isotopic compositions of the leachates. △ Less

Submitted 15 December, 2008; originally announced December 2008.

Comments: 40 pages, 9 figures, 2 tables. Accepted for publication in Earth and Planetary Science Letters

Universal joint-measurement uncertainty relation for error bars

Authors: Paul Busch, David B. Pearson

Abstract: We formulate and prove a new, universally valid uncertainty relation for the necessary errors bar widths in any approximate joint measurement of position and momentum. We formulate and prove a new, universally valid uncertainty relation for the necessary errors bar widths in any approximate joint measurement of position and momentum. △ Less

Submitted 28 July, 2007; v1 submitted 22 December, 2006; originally announced December 2006.

Comments: Version 2 has minor corrections and a new reference

MSC Class: 81P15; 81P05

Journal ref: J. Math. Phys. 48 (2007) 082103/1-10

Current status of the DARPA Quantum Network

Authors: Chip Elliott, Alexander Colvin, David Pearson, Oleksiy Pikalo, John Schlafer, Henry Yeh

Abstract: This paper reports the current status of the DARPA Quantum Network, which became fully operational in BBN's laboratory in October 2003, and has been continuously running in 6 nodes operating through telecommunications fiber between Harvard University, Boston University, and BBN since June 2004. The DARPA Quantum Network is the world's first quantum cryptography network, and perhaps also the firs… ▽ More This paper reports the current status of the DARPA Quantum Network, which became fully operational in BBN's laboratory in October 2003, and has been continuously running in 6 nodes operating through telecommunications fiber between Harvard University, Boston University, and BBN since June 2004. The DARPA Quantum Network is the world's first quantum cryptography network, and perhaps also the first QKD systems providing continuous operation across a metropolitan area. Four more nodes are now being added to bring the total to 10 QKD nodes. This network supports a variety of QKD technologies, including phase-modulated lasers through fiber, entanglement through fiber, and freespace QKD. We provide a basic introduction and rational for this network, discuss the February 2005 status of the various QKD hardware suites and software systems in the network, and describe our operational experience with the DARPA Quantum Network to date. We conclude with a discussion of our ongoing work. △ Less

Submitted 17 March, 2005; v1 submitted 5 March, 2005; originally announced March 2005.

Comments: Draft SPIE conference paper. 13 pages, 13 figures. Information current as of February 2005. Second draft

Disparity of tropospheric and surface temperature trends: New evidence

Authors: David H. Douglass, Benjamin D. Pearson, S. Fred Singer, Paul C. Knappenberger, Patrick J. Michaels

Abstract: Observations suggest that the earth's surface has been warming relative to the troposphere for the last 25 years; this is not only difficult to explain but also contrary to the results of climate models. We provide new evidence that the disparity is real. Introducing an additional data set, R2 2 meter temperatures, a diagnostic variable related to tropospheric temperature profiles, we find trend… ▽ More Observations suggest that the earth's surface has been warming relative to the troposphere for the last 25 years; this is not only difficult to explain but also contrary to the results of climate models. We provide new evidence that the disparity is real. Introducing an additional data set, R2 2 meter temperatures, a diagnostic variable related to tropospheric temperature profiles, we find trends derived from it to be in close agreement with satellite measurements of tropospheric temperature. This suggests that the disparity likely is a result of near-surface processes. We find that the disparity does not occur uniformly across the globe, but is primarily confined to tropical regions which are primarily oceanic. Since the ocean measurements are sea surface temperatures, we suggest that the disparity is probably associated with processes at the ocean-atmosphere interface. Our study thus makes unlikely some of the explanations advanced to account for the disparity; it also demonstrates the importance of distinguishing between land, sea and air measurements △ Less

Submitted 14 July, 2004; originally announced July 2004.

Comments: 17 pages, 3 figures

Journal ref: GEOPHYSICAL RESEARCH LETTERS, VOL. 31, L13207, 2004

Altitude dependence of atmospheric temperature trends: Climate models versus observation

Authors: David H. Douglass, Benjamin D. Pearson, S. Fred Singer

Abstract: As a consequence of greenhouse forcing, all state of the art general circulation models predict a positive temperature trend that is greater for the troposphere than the surface. This predicted positive trend increases in value with altitude until it reaches a maximum ratio with respect to the surface of as much as 1.5 to 2.0 at about 200 to 400 hPa. However, the temperature trends from several… ▽ More As a consequence of greenhouse forcing, all state of the art general circulation models predict a positive temperature trend that is greater for the troposphere than the surface. This predicted positive trend increases in value with altitude until it reaches a maximum ratio with respect to the surface of as much as 1.5 to 2.0 at about 200 to 400 hPa. However, the temperature trends from several independent observational data sets show decreasing as well as mostly negative values. This disparity indicates that the three models examined here fail to account for the effects of greenhouse forcings. △ Less

Submitted 14 July, 2004; originally announced July 2004.

Comments: 9 pages, 3 figures

Journal ref: GEOPHYSICAL RESEARCH LETTERS, VOL. 31, L13208, 2004

On the Optimal Mean Photon Number for Quantum Cryptography

Authors: David Pearson, Chip Elliott

Abstract: The optimal mean photon number (mu) for quantum cryptography is the average photon number per transmitted pulse that results in the highest delivery rate of distilled cryptographic key bits, given a specific system scenario and set of assumptions about Eve's capabilities. Although many experimental systems have employed a mean photon number (mu) of 0.1 in practice, several research teams have po… ▽ More The optimal mean photon number (mu) for quantum cryptography is the average photon number per transmitted pulse that results in the highest delivery rate of distilled cryptographic key bits, given a specific system scenario and set of assumptions about Eve's capabilities. Although many experimental systems have employed a mean photon number (mu) of 0.1 in practice, several research teams have pointed out that this value is somewhat arbitrary. In fact, various optimal values for mu have been described in the literature. In this paper we offer a detailed analytic model for an experimental, fiber-based quantum cryptographic system, and an explicit set of reasonable assumptions about Eve's current technical capabilities. We explicitly model total system behavior ranging from physical effects to the results of quantum cryptographic protocols such as error correction and privacy amplification. We then derive the optimal photon number (mu) for this system in a range of scenarios. One interesting result is that mu of approximately 1.1 is optimal for a wide range of realistic, fiber-based QKD systems; in fact, it provides nearly 10 times the distilled throughput of systems that employ a more conventional mu = 0.1, without any adverse affect on system security, as judged against a set of reasonable assumptions about Eve's current capabilities. △ Less

Submitted 17 May, 2004; v1 submitted 8 March, 2004; originally announced March 2004.

Comments: 19 pages, 4 figures

Quantum Cryptography in Practice

Authors: Chip Elliott, David Pearson, Gregory Troxel

Abstract: BBN, Harvard, and Boston University are building the DARPA Quantum Network, the world's first network that delivers end-to-end network security via high-speed Quantum Key Distribution, and testing that Network against sophisticated eavesdrop** attacks. The first network link has been up and steadily operational in our laboratory since December 2002. It provides a Virtual Private Network betwee… ▽ More BBN, Harvard, and Boston University are building the DARPA Quantum Network, the world's first network that delivers end-to-end network security via high-speed Quantum Key Distribution, and testing that Network against sophisticated eavesdrop** attacks. The first network link has been up and steadily operational in our laboratory since December 2002. It provides a Virtual Private Network between private enclaves, with user traffic protected by a weak-coherent implementation of quantum cryptography. This prototype is suitable for deployment in metro-size areas via standard telecom (dark) fiber. In this paper, we introduce quantum cryptography, discuss its relation to modern secure networks, and describe its unusual physical layer, its specialized quantum cryptographic protocol suite (quite interesting in its own right), and our extensions to IPsec to integrate it with quantum cryptography. △ Less

Submitted 7 July, 2003; originally announced July 2003.

Comments: Preprint of SIGCOMM 2003 paper

Value distribution and spectral theory of Schrodinger operators with L^2-sparse potentials

Authors: S. V. Breimesser, James D. E. Grant, D. B. Pearson

Abstract: We apply the methods of value distribution theory to the spectral asymptotics of Schrodinger operators with L^2-sparse potentials. We apply the methods of value distribution theory to the spectral asymptotics of Schrodinger operators with L^2-sparse potentials. △ Less

Submitted 7 August, 2002; originally announced August 2002.

Comments: 14 pages

MSC Class: 47E05; 34L05; 82Q10

Commutativity up to a factor of bounded operators in complex Hilbert space

Authors: J. A. Brooke, P. Busch, D. B. Pearson

Abstract: We explore commutativity up to a factor, $AB=λBA$, for bounded operators in a complex Hilbert space. Conditions on the possible values of the factor $λ$ are formulated and shown to depend on spectral properties of the operators involved. Commutativity up to a unitary factor is considered for pairs of self-adjoint operators. Examples of nontrivial realizations of such commutation relations are gi… ▽ More We explore commutativity up to a factor, $AB=λBA$, for bounded operators in a complex Hilbert space. Conditions on the possible values of the factor $λ$ are formulated and shown to depend on spectral properties of the operators involved. Commutativity up to a unitary factor is considered for pairs of self-adjoint operators. Examples of nontrivial realizations of such commutation relations are given. △ Less

Submitted 25 May, 2001; v1 submitted 9 July, 2000; originally announced July 2000.

Comments: 9 pages. Material reorganised, new examples added to highlight relations between main results. Submitted to Proc. Roy. Soc. A

MSC Class: 46N50; 47A05; 81P15

Journal ref: Proc. Roy. Soc. A (London) 458 (2002) 109-118.