-
Triggerless data acquisition pipeline for Machine Learning based statistical anomaly detection
Authors:
Gaia Grosso,
Nicolò Lai,
Matteo Migliorini,
Jacopo Pazzini,
Andrea Triossi,
Marco Zanetti,
Alberto Zucchetta
Abstract:
This work describes an online processing pipeline designed to identify anomalies in a continuous stream of data collected without external triggers from a particle detector. The processing pipeline begins with a local reconstruction algorithm, employing neural networks on an FPGA as its first stage. Subsequent data preparation and anomaly detection stages are accelerated using GPGPUs. As a practic…
▽ More
This work describes an online processing pipeline designed to identify anomalies in a continuous stream of data collected without external triggers from a particle detector. The processing pipeline begins with a local reconstruction algorithm, employing neural networks on an FPGA as its first stage. Subsequent data preparation and anomaly detection stages are accelerated using GPGPUs. As a practical demonstration of anomaly detection, we have developed a data quality monitoring application using a cosmic muon detector. Its primary objective is to detect deviations from the expected operational conditions of the detector. This serves as a proof-of-concept for a system that can be adapted for use in large particle physics experiments, enabling anomaly detection on datasets with reduced bias.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Electron thermalization length in solid para-hydrogen at low-temperature
Authors:
A. F. Borghesani,
G. Carugno,
G. Messineo,
J. Pazzini
Abstract:
We report the first ever measurements of the thermalization length of low-energy electrons injected into solid para-hydrogen at a temperature \(T\approx 2.8\,\)K. The use of the pulsed Townsend photoinjection technique has allowed us to investigate the behavior of quasi-free electrons rather than of massive, slow negative charges as reported in all previous literature. We have found an average the…
▽ More
We report the first ever measurements of the thermalization length of low-energy electrons injected into solid para-hydrogen at a temperature \(T\approx 2.8\,\)K. The use of the pulsed Townsend photoinjection technique has allowed us to investigate the behavior of quasi-free electrons rather than of massive, slow negative charges as reported in all previous literature. We have found an average thermalization length \(\langle z_0\rangle\approx 260\,\)Å which is 3 to 5 times longer than that in liquid helium at the same temperature.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Fast kernel methods for Data Quality Monitoring as a goodness-of-fit test
Authors:
Gaia Grosso,
Nicolò Lai,
Marco Letizia,
Jacopo Pazzini,
Marco Rando,
Lorenzo Rosasco,
Andrea Wulzer,
Marco Zanetti
Abstract:
We here propose a machine learning approach for monitoring particle detectors in real-time. The goal is to assess the compatibility of incoming experimental data with a reference dataset, characterising the data behaviour under normal circumstances, via a likelihood-ratio hypothesis test. The model is based on a modern implementation of kernel methods, nonparametric algorithms that can learn any c…
▽ More
We here propose a machine learning approach for monitoring particle detectors in real-time. The goal is to assess the compatibility of incoming experimental data with a reference dataset, characterising the data behaviour under normal circumstances, via a likelihood-ratio hypothesis test. The model is based on a modern implementation of kernel methods, nonparametric algorithms that can learn any continuous function given enough data. The resulting approach is efficient and agnostic to the type of anomaly that may be present in the data. Our study demonstrates the effectiveness of this strategy on multivariate data from drift tube chamber muon detectors.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
L. Barcellan,
C. Baldanza,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
A. Bergnoli,
L. C. Blanco Ramos,
L. Borgonovi,
A. Bragagnolo,
V. Cafaro,
A. Calderon,
E. Calvo,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo,
J. M. Cela Ruiz
, et al. (121 additional authors not shown)
Abstract:
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s…
▽ More
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
A fast and flexible machine learning approach to data quality monitoring
Authors:
Gaia Grosso,
Nicolò Lai,
Marco Letizia,
Jacopo Pazzini,
Marco Rando,
Andrea Wulzer,
Marco Zanetti
Abstract:
We present a machine learning based approach for real-time monitoring of particle detectors. The proposed strategy evaluates the compatibility between incoming batches of experimental data and a reference sample representing the data behavior in normal conditions by implementing a likelihood-ratio hypothesis test. The core model is powered by recent large-scale implementations of kernel methods, n…
▽ More
We present a machine learning based approach for real-time monitoring of particle detectors. The proposed strategy evaluates the compatibility between incoming batches of experimental data and a reference sample representing the data behavior in normal conditions by implementing a likelihood-ratio hypothesis test. The core model is powered by recent large-scale implementations of kernel methods, nonparametric learning algorithms that can approximate any continuous function given enough data. The resulting algorithm is fast, efficient and agnostic about the type of potential anomaly in the data. We show the performance of the model on multivariate data from a drift tube chambers muon detector.
△ Less
Submitted 10 March, 2023; v1 submitted 21 January, 2023;
originally announced January 2023.
-
A horizontally scalable online processing system for trigger-less data acquisition
Authors:
Matteo Migliorini,
Jacopo Pazzini,
Andrea Triossi,
Marco Zanetti,
Alberto Zucchetta
Abstract:
The majority of high energy physics experiments rely on data acquisition and hardware-based trigger systems performing a number of stringent selections before storing data for offline analysis. The online reconstruction and selection performed at the trigger level are bound to the synchronous nature of the data acquisition system, resulting in a trade-off between the amount of data collected and t…
▽ More
The majority of high energy physics experiments rely on data acquisition and hardware-based trigger systems performing a number of stringent selections before storing data for offline analysis. The online reconstruction and selection performed at the trigger level are bound to the synchronous nature of the data acquisition system, resulting in a trade-off between the amount of data collected and the complexity of the online reconstruction performed. Exotic physics processes, such as long-lived and slow-moving particles, are rarely targeted by online triggers as they require complex and nonstandard online reconstruction, usually incompatible with the time constraints of most data acquisition systems. The online trigger selection can thus impact as one of the main limiting factors to the experimental reach for exotic signatures. Alternative data acquisition solutions based on the continuous and asynchronous processing of the stream of data from the detectors are therefore foreseeable. Trigger-less data readout systems, paired with efficient streaming data processing solutions, can provide a viable alternative. In this document, an end-to-end implementation of a fully trigger-less data acquisition and online processing system is discussed. An easily scalable and deployable implementation of such an architecture is proposed, based on open-source distributed computing frameworks capable of performing asynchronous online processing of streaming data. The proposed schema can be suitable for deployment as a fully integrated system for small-scale experimental apparatus, or to complement the trigger-based data acquisition systems of larger experiments. A muon telescope setup consisting of a set of gaseous detectors is used as the experimental development testbed in this work, and a fully integrated online processing pipeline deployed on cloud computing resources is implemented and described.
△ Less
Submitted 8 March, 2022; v1 submitted 9 November, 2021;
originally announced November 2021.
-
Muon detection in electron-positron annihilation for muon collider studies
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco- Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
F. Casaburo,
M. Casarsa,
G. Cavoto,
G. Cesarini,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli
, et al. (21 additional authors not shown)
Abstract:
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,…
▽ More
The investigation of the energy frontier in physics requires novel concepts for future colliders. The idea of a muon collider is very appealing since it would allow to study particle collisions at up to tens of TeV energy, while offering a cleaner experimental environment with respect to hadronic colliders. One key element in the muon collider design is the low-emittance muon production. Recently,the Low EMittance Muon Accelerator (LEMMA) collaboration has explored the muon pair production close to its kinematic threshold by annihilating 45 GeV positrons with electrons in a low Z material target. In this configuration, muons are emerging from the target with a naturally low-emittance. In this paper we describe the performance of a system, to study this production mechanism, that consists in several segmented absorbers with alternating active layers composed of fast Cherenkov detectors together with a muon identification technique based on this detector. Passive layers were made of tungsten. We collected data corresponding to muon and electron beams produced at the H2 line in the North Area of the European Organization for Nuclear Research (CERN) in September 2018.
△ Less
Submitted 31 October, 2021; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Muon trigger with fast Neural Networks on FPGA, a demonstrator
Authors:
Matteo Migliorini,
Jacopo Pazzini,
Andrea Triossi,
Marco Zanetti,
Alberto Zucchetta
Abstract:
The online reconstruction of muon tracks in High Energy Physics experiments is a highly demanding task, typically performed with programmable logic boards, such as FPGAs. Complex analytical algorithms are executed in a quasi-real-time environment to identify, select and reconstruct local tracks in often noise-rich environments. A novel approach to the generation of local triggers based on an hybri…
▽ More
The online reconstruction of muon tracks in High Energy Physics experiments is a highly demanding task, typically performed with programmable logic boards, such as FPGAs. Complex analytical algorithms are executed in a quasi-real-time environment to identify, select and reconstruct local tracks in often noise-rich environments. A novel approach to the generation of local triggers based on an hybrid combination of Artificial Neural Networks and analytical methods is proposed, targeting the muon reconstruction for drift tube detectors. The proposed algorithm exploits Neural Networks to solve otherwise computationally expensive analytical tasks for the unique identification of coherent signals and the removal of the geometrical ambiguities. The proposed approach is deployed on state-of-the-art FPGA and its performances are evaluated on simulation and on data collected from cosmic rays.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
J. M. Barcala,
L. Barcellan,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
L. C. Blanco Ramos,
A. Boletti,
A. Bragagnolo,
J. A. Brochero Cifuentes,
V. Cafaro,
A. Calderon,
E. Calvo,
A. Cappati,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo
, et al. (118 additional authors not shown)
Abstract:
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad…
▽ More
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
Study of muon pair production from positron annihilation at threshold energy
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco-Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
M. Casarsa,
G. Cavoto,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli,
B. Kiani,
D. Lucchesi
, et al. (17 additional authors not shown)
Abstract:
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small…
▽ More
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small transverse emittance beams without any additional beam cooling. However most of the measurements available are performed at higher $\sqrt{s}$ values. It is therefore necessary to measure muons production in positron annihilation at threshold energy and compare the experimental results with the predictions in this specific energy regime. Apart from being a topic of physical interest by itself, these near to threshold measurements can have a sizeable impact on the estimation of the ultimate luminosity achievable in a muon collider with the LEMMA injection scheme.
△ Less
Submitted 10 January, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
Positron driven muon source for a muon collider
Authors:
D. Alesini,
M. Antonelli,
M. E. Biagini,
M. Boscolo,
O. R. Blanco-García,
A. Ciarma,
R. Cimino,
M. Iafrati,
A. Giribono,
S. Guiducci,
L. Pellegrino,
M. Rotondo,
C. Vaccarezza,
A. Variola,
A. Allegrucci,
F. Anulli,
M. Bauce,
F. Collamati,
G. Cavoto,
G. Cesarini,
F. Iacoangeli,
R. Li Voti,
A. Bacci,
I. Drebot,
P. Raimondi
, et al. (33 additional authors not shown)
Abstract:
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an…
▽ More
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D.
△ Less
Submitted 19 May, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Using Big Data Technologies for HEP Analysis
Authors:
Matteo Cremonesi,
Claudio Bellini,
Bianny Bian,
Luca Canali,
Vasileios Dimakopoulos,
Peter Elmer,
Ian Fisk,
Maria Girone,
Oliver Gutsche,
Siew-Yan Hoh,
Bo Jayatilaka,
Viktor Khristenko,
Andrea Luiselli,
Andrew Melo,
Evangelos Evangelos,
Dominick Olivito,
Jacopo Pazzini,
Jim Pivarski,
Alexey Svyatkovskiy,
Marco Zanetti
Abstract:
The HEP community is approaching an era were the excellent performances of the particle accelerators in delivering collision at high rate will force the experiments to record a large amount of information. The growing size of the datasets could potentially become a limiting factor in the capability to produce scientific results timely and efficiently. Recently, new technologies and new approaches…
▽ More
The HEP community is approaching an era were the excellent performances of the particle accelerators in delivering collision at high rate will force the experiments to record a large amount of information. The growing size of the datasets could potentially become a limiting factor in the capability to produce scientific results timely and efficiently. Recently, new technologies and new approaches have been developed in industry to answer to the necessity to retrieve information as quickly as possible to analyze PB and EB datasets. Providing the scientists with these modern computing tools will lead to rethinking the principles of data analysis in HEP, making the overall scientific process faster and smoother.
In this paper, we are presenting the latest developments and the most recent results on the usage of Apache Spark for HEP analysis. The study aims at evaluating the efficiency of the application of the new tools both quantitatively, by measuring the performances, and qualitatively, focusing on the user experience. The first goal is achieved by develo** a data reduction facility: working together with CERN Openlab and Intel, CMS replicates a real physics search using Spark-based technologies, with the ambition of reducing 1 PB of public data in 5 hours, collected by the CMS experiment, to 1 TB of data in a format suitable for physics analysis.
The second goal is achieved by implementing multiple physics use-cases in Apache Spark using as input preprocessed datasets derived from official CMS data and simulation. By performing different end-analyses up to the publication plots on different hardware, feasibility, usability and portability are compared to the ones of a traditional ROOT-based workflow.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Beyond the Standard Model Physics at the HL-LHC and HE-LHC
Authors:
X. Cid Vidal,
M. D'Onofrio,
P. J. Fox,
R. Torre,
K. A. Ulmer,
A. Aboubrahim,
A. Albert,
J. Alimena,
B. C. Allanach,
C. Alpigiani,
M. Altakach,
S. Amoroso,
J. K. Anders,
J. Y. Araz,
A. Arbey,
P. Azzi,
I. Babounikau,
H. Baer,
M. J. Baker,
D. Barducci,
V. Barger,
O. Baron,
L. Barranco Navarro,
M. Battaglia,
A. Bay
, et al. (272 additional authors not shown)
Abstract:
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu…
▽ More
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.
△ Less
Submitted 13 August, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum
Authors:
Daniel Abercrombie,
Nural Akchurin,
Ece Akilli,
Juan Alcaraz Maestre,
Brandon Allen,
Barbara Alvarez Gonzalez,
Jeremy Andrea,
Alexandre Arbey,
Georges Azuelos,
Patrizia Azzi,
Mihailo Backović,
Yang Bai,
Swagato Banerjee,
James Beacham,
Alexander Belyaev,
Antonio Boveia,
Amelia Jean Brennan,
Oliver Buchmueller,
Matthew R. Buckley,
Giorgio Busoni,
Michael Buttignol,
Giacomo Cacciapaglia,
Regina Caputo,
Linda Carpenter,
Nuno Filipe Castro
, et al. (114 additional authors not shown)
Abstract:
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of t…
▽ More
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations.
△ Less
Submitted 3 July, 2015;
originally announced July 2015.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Measurement of CP Violation in $\mathrm{B}^{0}_{\mathrm{s}} \! \to \mathrm{J} / ψ\,φ$ decays with the CMS detector
Authors:
Jacopo Pazzini
Abstract:
The CP-violating weak phase $φ_\mathrm{s}$ and the decay width difference $ΔΓ_{\mathrm{s}}$ of $\mathrm{B}^{0}_{\mathrm{s}}$ mesons are measured by the CMS experiment at the LHC using a data sample of $\mathrm{B}^{0}_{\mathrm{s}} \! \to \mathrm{J} / ψ\,φ$ decays. The analysed dataset corresponds to an integrated luminosity of about $20~\mathrm{fb}^{-1}$ collected in $pp$ collisions at a centre-of-…
▽ More
The CP-violating weak phase $φ_\mathrm{s}$ and the decay width difference $ΔΓ_{\mathrm{s}}$ of $\mathrm{B}^{0}_{\mathrm{s}}$ mesons are measured by the CMS experiment at the LHC using a data sample of $\mathrm{B}^{0}_{\mathrm{s}} \! \to \mathrm{J} / ψ\,φ$ decays. The analysed dataset corresponds to an integrated luminosity of about $20~\mathrm{fb}^{-1}$ collected in $pp$ collisions at a centre-of-mass energy $\sqrt{s} = 8~\mathrm{TeV}$. A total of $49\,000$ reconstructed $\mathrm{B}^{0}_{\mathrm{s}}$ decays are used to extract the values $φ_\mathrm{s}$ and $ΔΓ_\mathrm{s}$ by performing a time-dependent and flavour-tagged angular analysis of the $μ^+μ^-\mathrm{K}^+\mathrm{K}^-$ final state.The weak phase is measured to be $φ_\mathrm{s} = -0.03 \pm 0.11~\mathrm{(stat.)} \pm 0.03~\mathrm{(syst.)}~\mathrm{rad}$, and the decay width difference between the $\mathrm{B}^{0}_{\mathrm{s}}$ mass eigenstates is $ΔΓ_\mathrm{s} = 0.096 \pm 0.014~\mathrm{(stat.)} \pm 0.007~\mathrm{(syst.)}~\mathrm{ps}^{-1}$.
△ Less
Submitted 8 January, 2015; v1 submitted 13 November, 2014;
originally announced November 2014.
