-
A GEM based TPC for beam monitoring
Authors:
Gábor Galgóczi,
Gergő Hamar,
Péter Pázmándi,
Dezső Varga
Abstract:
In recent years Gas Electron Multipliers have proven to be reliable amplification stages at high beam rates, and can be used also in Time Projection Chambers. Our group developed a 1 dm$^3$ active volume double-GEM TPC, with spatial resolution of 50 $μm$ and 280 $μ$m. Custom designed FPGA data acquisition system enables rate capability for about 100 kHz$\cdot$mm$^{-2}$, providing excellent track-b…
▽ More
In recent years Gas Electron Multipliers have proven to be reliable amplification stages at high beam rates, and can be used also in Time Projection Chambers. Our group developed a 1 dm$^3$ active volume double-GEM TPC, with spatial resolution of 50 $μm$ and 280 $μ$m. Custom designed FPGA data acquisition system enables rate capability for about 100 kHz$\cdot$mm$^{-2}$, providing excellent track-by-track position and angular information, better than 0.1 mm and 1 mrad respectively. The wide dynamic range of the system enables identification from $^{4}$He up to $^{86}$Kr using ionization measurement. Two of these TPCs are planned to operate in tandem mode to filter off-time particles and to achieve a superior angular resolution.
△ Less
Submitted 4 September, 2020;
originally announced September 2020.
-
Neutron reflectometry with the Multi-Blade 10B-based detector
Authors:
G. Mauri,
F. Messi,
M. Anastasopoulos,
T. Arnold,
A. Glavic,
C. Höglund,
T. Ilves,
I. Lopez Higuera,
P. Pazmandi,
D. Raspino,
L. Robinson,
S. Schmidt,
P. Svensson,
D. Varga,
R. Hall-Wilton,
F. Piscitelli
Abstract:
The Multi-Blade is a Boron-10-based gaseous detector developed for neutron reflectometry instruments at the European Spallation Source (ESS) in Sweden. The main challenges for neutron reflectometry detectors are the instantaneous counting rate and spatial resolution. The Multi-Blade has been tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. A campaign of scientific measu…
▽ More
The Multi-Blade is a Boron-10-based gaseous detector developed for neutron reflectometry instruments at the European Spallation Source (ESS) in Sweden. The main challenges for neutron reflectometry detectors are the instantaneous counting rate and spatial resolution. The Multi-Blade has been tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. A campaign of scientific measurements has been performed to study the Multi-Blade response in real instrumental conditions. The results of these tests are discussed in this manuscript.
△ Less
Submitted 18 April, 2018; v1 submitted 11 April, 2018;
originally announced April 2018.
-
Characterization of the Multi-Blade 10B-based detector at the CRISP reflectometer at ISIS for neutron reflectometry at ESS
Authors:
F. Piscitelli,
G. Mauri,
F. Messi,
M. Anastasopoulos,
T. Arnold,
A. Glavic,
C. Höglund,
T. Ilves,
I. Lopez Higuera,
P. Pazmandi,
D. Raspino,
L. Robinson,
S. Schmidt,
P. Svensson,
D. Varga,
R. Hall-Wilton
Abstract:
The Multi-Blade is a Boron-10-based gaseous thermal neutron detector developed to face the challenge arising in neutron reflectometry at neutron sources. Neutron reflectometers are challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed according to the requirements given by the reflectometers at the European Spallation Source (ESS) i…
▽ More
The Multi-Blade is a Boron-10-based gaseous thermal neutron detector developed to face the challenge arising in neutron reflectometry at neutron sources. Neutron reflectometers are challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed according to the requirements given by the reflectometers at the European Spallation Source (ESS) in Sweden. The Multi-Blade has been installed and tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. The results on the detailed detector characterization are discussed in this manuscript.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
The Multi-Blade Boron-10-based Neutron Detector for high intensity Neutron Reflectometry at ESS
Authors:
Francesco Piscitelli,
Francesco Messi,
Michail Anastasopoulos,
Tomasz Bryś,
Faye Chicken,
Eszter Dian,
Janos Fuzi,
Carina Höglund,
Gabor Kiss,
Janos Orban,
Peter Pazmandi,
Linda Robinson,
Laszlo Rosta,
Susann Schmidt,
Dezso Varga,
Tibor Zsiros,
Richard Hall-Wilton
Abstract:
The Multi-Blade is a Boron-10-based gaseous detector introduced to face the challenge arising in neutron reflectometry at pulsed neutron sources. Neutron reflectometers are the most challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed to cope with the requirements set for the reflectometers at the upcoming European Spallation Sourc…
▽ More
The Multi-Blade is a Boron-10-based gaseous detector introduced to face the challenge arising in neutron reflectometry at pulsed neutron sources. Neutron reflectometers are the most challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed to cope with the requirements set for the reflectometers at the upcoming European Spallation Source (ESS) in Sweden. Based on previous results obtained at the Institut Laue-Langevin (ILL) in France, an improved demonstrator has been built at ESS and tested at the Budapest Neutron Centre (BNC) in Hungary and at the Source Testing Facility (STF) at the Lund University in Sweden. A detailed description of the detector and the results of the tests are discussed in this manuscript.
△ Less
Submitted 26 January, 2017;
originally announced January 2017.
-
First report of long term measurements of the {MGGL} laboratory in the {M}átra mountain range
Authors:
G. G. Barnaföldi,
T. Bulik,
M. Cieslar,
E. Dávid,
M. Dobróka,
E. Fenyvesi,
D. Gondek-Rosinska,
Z. Gráczer,
G. Hamar,
G. Huba,
Á. Kis,
R. Kovács,
I. Lemperger,
P. Lévai,
J. Molnár,
D. Nagy,
A. Novák,
L. Oláh,
P. Pázmándi,
D. Piri,
L. Somlai,
T. Starecki,
M. Suchenek,
G. Surányi,
S. Szalai
, et al. (6 additional authors not shown)
Abstract:
Matra Gravitational and Geophysical Laboratory (MGGL) has been established near Gyöngyösoroszi, Hungary in 2015, in the cavern system of an unused ore mine. The Laboratory is located at 88~m below the surface, with the aim to measure and analyse the advantages of the underground installation of third generation gravitational wave detectors. Specialized instruments have been installed to measure se…
▽ More
Matra Gravitational and Geophysical Laboratory (MGGL) has been established near Gyöngyösoroszi, Hungary in 2015, in the cavern system of an unused ore mine. The Laboratory is located at 88~m below the surface, with the aim to measure and analyse the advantages of the underground installation of third generation gravitational wave detectors. Specialized instruments have been installed to measure seismic, infrasound, electromagnetic noise, and the variation of the cosmic muon flux. In the preliminary (RUN-0) test period, March-August 2016, data collection has been accomplished. In this paper we describe the research potential of the MGGL, list the installed equipments and summarize the experimental results of RUN-0. Here we report RUN-0 data, that prepares systematic and synchronized data collection of the next run period.
△ Less
Submitted 3 May, 2017; v1 submitted 24 October, 2016;
originally announced October 2016.
-
Cosmic Muon Detector Using Proportional Chambers
Authors:
Dezső Varga,
Zoltán Gál,
Gergő Hamar,
Janka Sára Molnár,
Éva Oláh,
Péter Pázmándi
Abstract:
A set of classical multi-wire proportional chambers were designed and constructed with the main purpose of efficient cosmic muon detection. These detectors are relatively simple to construct, and at the same time are low cost, making them ideal for educational purposes. The detector layers have efficiencies above 99% for minimum ionizing cosmic muons, and their position resolution is about 1 cm, t…
▽ More
A set of classical multi-wire proportional chambers were designed and constructed with the main purpose of efficient cosmic muon detection. These detectors are relatively simple to construct, and at the same time are low cost, making them ideal for educational purposes. The detector layers have efficiencies above 99% for minimum ionizing cosmic muons, and their position resolution is about 1 cm, that is, particle trajectories are clearly observable. Visualization of straight tracks is possible using an LED array, with the discriminated and latched signal driving the display. Due to the exceptional operating stability of the chambers, the design can also be used for cosmic muon telescopes.
△ Less
Submitted 28 July, 2015;
originally announced July 2015.
