Showing 1–35 of 35 results for author: Patwari, N

Channel Estimation via Loss Field: Accurate Site-Trained Modeling for Shadowing Prediction

Authors: Jie Wang, Meles G. Weldegebriel, Neal Patwari

Abstract: Future mobile ad hoc networks will share spectrum between many users. Channels will be assigned on the fly to guarantee signal and interference power requirements for requested links. Channel losses must be re-estimated between many pairs of users as they move and as environmental conditions change. Computational complexity must be low, precluding the use of some accurate but computationally inten… ▽ More Future mobile ad hoc networks will share spectrum between many users. Channels will be assigned on the fly to guarantee signal and interference power requirements for requested links. Channel losses must be re-estimated between many pairs of users as they move and as environmental conditions change. Computational complexity must be low, precluding the use of some accurate but computationally intensive site-specific channel models. Channel model errors must be low, precluding the use of standard statistical channel models. We propose a new channel model, CELF, which uses channel loss measurements from a deployed network in the area and a Bayesian linear regression method to estimate a site-specific loss field for the area. The loss field is explainable as the site's 'shadowing' of the radio propagation across the area of interest, but it requires no site-specific terrain or building information. Then, for any arbitrary pair of transmitter and receiver positions, CELF sums the loss field near the link line to estimate its channel loss. We use extensive measurements to show that CELF lowers the variance of channel estimates by up to 56%. It outperforms 3 popular machine learning methods in variance reduction and training efficiency. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Two Measure is Two Know: Calibration-free Full Duplex Monitoring for Software Radio Platforms

Authors: Jie Wang, Jonathan Gornet, Alex Orange, Leigh Stoller, Gary Wong, Jacobus Van Der Merwe, Sneha Kumar Kasera, Neal Patwari

Abstract: Future virtualized radio access network (vRAN) infrastructure providers (and today's experimental wireless testbed providers) may be simultaneously uncertain what signals are being transmitted by their base stations and legally responsible for their violations. These providers must monitor the spectrum of transmissions and external signals without access to the radio itself. In this paper, we prop… ▽ More Future virtualized radio access network (vRAN) infrastructure providers (and today's experimental wireless testbed providers) may be simultaneously uncertain what signals are being transmitted by their base stations and legally responsible for their violations. These providers must monitor the spectrum of transmissions and external signals without access to the radio itself. In this paper, we propose FDMonitor, a full-duplex monitoring system attached between a transmitter and its antenna to achieve this goal. Measuring the signal at this point on the RF path is necessary but insufficient since the antenna is a bidirectional device. FDMonitor thus uses a bidirectional coupler, a two-channel receiver, and a new source separation algorithm to simultaneously estimate the transmitted signal and the signal incident on the antenna. Rather than requiring an offline calibration, we also adaptively estimate the linear model for the system on the fly. FDMonitor has been running on a real-world open wireless testbed, monitoring 19 SDR platforms controlled (with bare metal access) by outside experimenters over a seven month period, sending alerts whenever a violation is observed. Our experimental results show that FDMonitor accurately separates signals across a range of signal parameters. Over more than 7 months of observation, it achieves a positive predictive value of 97%, with a total of 20 false alerts. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Racial Disparities in Pulse Oximetry Cannot Be Fixed With Race-Based Correction

Authors: Neal Patwari, Di Huang, Kiki Bonetta-Misteli

Abstract: Studies have shown pulse oximeter measurements of blood oxygenation have statistical bias that is a function of race, which results in higher rates of occult hypoxemia, i.e., missed detection of dangerously low oxygenation, in patients of color. This paper further characterizes the statistical distribution of pulse ox measurements, showing they also have a higher variance for patients racialized a… ▽ More Studies have shown pulse oximeter measurements of blood oxygenation have statistical bias that is a function of race, which results in higher rates of occult hypoxemia, i.e., missed detection of dangerously low oxygenation, in patients of color. This paper further characterizes the statistical distribution of pulse ox measurements, showing they also have a higher variance for patients racialized as Black, compared to those racialized as white. We show that no single race-based correction factor will provide equal performance in the detection of hypoxemia. The results have implications for racially equitable pulse oximetry. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 6 pages, originally submitted to IEEE SPMB 2022 on 1 July 2022

Global Performance Disparities Between English-Language Accents in Automatic Speech Recognition

Authors: Alex DiChristofano, Henry Shuster, Shefali Chandra, Neal Patwari

Abstract: Past research has identified discriminatory automatic speech recognition (ASR) performance as a function of the racial group and nationality of the speaker. In this paper, we expand the discussion beyond bias as a function of the individual national origin of the speaker to look for bias as a function of the geopolitical orientation of their nation of origin. We audit some of the most popular Engl… ▽ More Past research has identified discriminatory automatic speech recognition (ASR) performance as a function of the racial group and nationality of the speaker. In this paper, we expand the discussion beyond bias as a function of the individual national origin of the speaker to look for bias as a function of the geopolitical orientation of their nation of origin. We audit some of the most popular English language ASR services using a large and global data set of speech from The Speech Accent Archive, which includes over 2,700 speakers of English born in 171 different countries. We show that, even when controlling for multiple linguistic covariates, ASR service performance has a statistically significant relationship to the political alignment of the speaker's birth country with respect to the United States' geopolitical power. This holds for all ASR services tested. We discuss this bias in the context of the historical use of language to maintain global and political power. △ Less

Submitted 8 February, 2023; v1 submitted 1 August, 2022; originally announced August 2022.

Comments: Added additional covariates to speaker-level regression and made minor changes to transcript processing

Precarity: Modeling the Long Term Effects of Compounded Decisions on Individual Instability

Authors: Pegah Nokhiz, Aravinda Kanchana Ruwanpathirana, Neal Patwari, Suresh Venkatasubramanian

Abstract: When it comes to studying the impacts of decision making, the research has been largely focused on examining the fairness of the decisions, the long-term effects of the decision pipelines, and utility-based perspectives considering both the decision-maker and the individuals. However, there has hardly been any focus on precarity which is the term that encapsulates the instability in people's lives… ▽ More When it comes to studying the impacts of decision making, the research has been largely focused on examining the fairness of the decisions, the long-term effects of the decision pipelines, and utility-based perspectives considering both the decision-maker and the individuals. However, there has hardly been any focus on precarity which is the term that encapsulates the instability in people's lives. That is, a negative outcome can overspread to other decisions and measures of well-being. Studying precarity necessitates a shift in focus - from the point of view of the decision-maker to the perspective of the decision subject. This centering of the subject is an important direction that unlocks the importance of parting with aggregate measures to examine the long-term effects of decision making. To address this issue, in this paper, we propose a modeling framework that simulates the effects of compounded decision-making on precarity over time. Through our simulations, we are able to show the heterogeneity of precarity by the non-uniform ruinous aftereffects of negative decisions on different income classes of the underlying population and how policy interventions can help mitigate such effects. △ Less

Submitted 24 April, 2021; originally announced April 2021.

Comments: To appear at AIES 2021

Outer Valence Intermolecular Coulombic Decay in Hydrogen-Bonded Complexes Induced by Resonant Two-Photon Excitation by 4.4 eV Photons

Authors: Namitha Brijit Bejoy, Nitin. K Singh, Balanarayan Pananghat, G. Naresh Patwari

Abstract: Photoexcitation of van der Waals complexes can lead to several decay pathways depending on the nature of the potential energy surfaces. Upon excitation of a chromophore in a complex, ionization of its weakly bound neighbour via energy transfer happens via a unique relaxation process known as intermolecular Coulombic decay (ICD); a phenomenon of renewed focus owing to its relevance in biological sy… ▽ More Photoexcitation of van der Waals complexes can lead to several decay pathways depending on the nature of the potential energy surfaces. Upon excitation of a chromophore in a complex, ionization of its weakly bound neighbour via energy transfer happens via a unique relaxation process known as intermolecular Coulombic decay (ICD); a phenomenon of renewed focus owing to its relevance in biological systems. Herein, we report an experimental evidence of outer-valence ICD induced by multiphoton excitation by near UV radiation of 4.4 eV photons, hitherto unknown in molecular systems. In the binary complexes of 2,6-difluorophenylacetylene with aliphatic amines such as dimethylamine and trimethylamine a resonant two-photon excitation is localized on the 2,6-difluorophenylacetylene chromophore. The absorbed energy is then transferred to its hydrogen-bonded partner amine and resulting in the formation of an amine cation. The kinetic energy distribution of the amine cations is invariant with respect to the initial geometry of the binary complex. The present experimental results combined with electronic structure calculations provide valuable insights into the nature of ICD in van der Waals complexes and more importantly, the role of ICD as a fast, efficient, and prominent decay channel following excitation at modest (4.4 eV) photon energies. △ Less

Submitted 13 January, 2022; v1 submitted 13 October, 2020; originally announced October 2020.

Comments: 20 Pages, 3 Figures, 8 Supplementary Figures

Collision Prediction from UWB Range Measurements

Authors: Alemayehu Solomon Abrar, Anh Luong, Gregory Spencer, Nathan Genstein, Neal Patwari, Mark Minor

Abstract: The ability to predict, and thus react to, oncoming collisions among a set of mobile agents is a fundamental requirement for safe autonomous movement, both human and robotic. This paper addresses systems that use range measurements between mobile agents for the purpose of collision prediction, which involves prediction of the agents' future paths to know if they will collide at any time. One strai… ▽ More The ability to predict, and thus react to, oncoming collisions among a set of mobile agents is a fundamental requirement for safe autonomous movement, both human and robotic. This paper addresses systems that use range measurements between mobile agents for the purpose of collision prediction, which involves prediction of the agents' future paths to know if they will collide at any time. One straightforward system would use known-location static anchors to estimate agent coordinates over time, and use the track to predict collision. Fundamentally, no fixed coordinate system is required for collision prediction, so using only the pairwise range between two agents can be used to predict collision. We present lower bound analysis which shows the limitations of this pairwise method. As an alternative anchor-free method, we propose the friend-based autonomous collision prediction and tracking (FACT) method that uses all measured ranges between nearby (unknown location mobile) agents, in a distributed algorithm, to estimate their relative locations and velocities and predict future collisions between agents. Using analysis and simulation, we show the potential for FACT to achieve equal or better collision detection performance compared to other methods, while avoiding the need for anchors. We then build a network of $N$ ultra wideband (UWB) devices and an efficient multi-node protocol which allows all ${\cal O}(N^2)$ pairwise ranges to be measured in $N$ slots. We run experiments with up to six independent robot agents moving and colliding in a 2D plane and up to four anchor nodes to compare the performance of the collision prediction methods. We show that the FACT method can perform better than either other method but without the need for a fixed infrastructure of anchor nodes. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Quantifying Interference-Assisted Signal Strength Surveillance of Sound Vibrations

Authors: Alemayehu Solomon Abrar, Neal Patwari, Sneha Kumar Kasera

Abstract: A malicious attacker could, by taking control of internet-of-things devices, use them to capture received signal strength (RSS) measurements and perform surveillance on a person's vital signs, activities, and sound in their environment. This article considers an attacker who looks for subtle changes in the RSS in order to eavesdrop sound vibrations. The challenge to the adversary is that sound vib… ▽ More A malicious attacker could, by taking control of internet-of-things devices, use them to capture received signal strength (RSS) measurements and perform surveillance on a person's vital signs, activities, and sound in their environment. This article considers an attacker who looks for subtle changes in the RSS in order to eavesdrop sound vibrations. The challenge to the adversary is that sound vibrations cause very low amplitude changes in RSS, and RSS is typically quantized with a significantly larger step size. This article contributes a lower bound on an attacker's monitoring performance as a function of the RSS step size and sampling frequency so that a designer can understand their relationship. Our bound considers the little-known and counter-intuitive fact that an adversary can improve their sinusoidal parameter estimates by making some devices transmit to add interference power into the RSS measurements. We demonstrate this capability experimentally. As we show, for typical transceivers, the RSS surveillance attacker can monitor sound vibrations with remarkable accuracy. New mitigation strategies will be required to prevent RSS surveillance attacks. △ Less

Submitted 21 February, 2020; originally announced February 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:1905.03939

Sitara: Spectrum Measurement Goes Mobile Through Crowd-sourcing

Authors: Phillip Smith, Anh Luong, Shamik Sarkar, Harsimran Singh, Neal Patwari, Sneha Kasera, Kurt Derr, Samuel Ramirez

Abstract: Software-defined radios (SDRs) are often used in the experimental evaluation of next-generation wireless technologies. While crowd-sourced spectrum monitoring is an important component of future spectrum-agile technologies, there is no clear way to test it in the real world, i.e., with hundreds of users each with an SDR in their pocket participating in RF experiments controlled by, and data upload… ▽ More Software-defined radios (SDRs) are often used in the experimental evaluation of next-generation wireless technologies. While crowd-sourced spectrum monitoring is an important component of future spectrum-agile technologies, there is no clear way to test it in the real world, i.e., with hundreds of users each with an SDR in their pocket participating in RF experiments controlled by, and data uploaded to, the cloud. Current fully functional SDRs are bulky, with components connected via wires, and last at most hours on a single battery charge. To address the needs of such experiments, we design and develop a compact, portable, untethered, and inexpensive SDR we call Sitara. Our SDR interfaces with a mobile device over Bluetooth 5 and can function standalone or as a client to a central command and control server. The Sitara offers true portability: it operates up to one week on battery power, requires no external wired connections and occupies a footprint smaller than a credit card. It transmits and receives common waveforms, uploads IQ samples or processed receiver data through a mobile device to a server for remote processing and performs spectrum sensing functions. Multiple Sitaras form a distributed system capable of conducting experiments in wireless networking and communication in addition to RF monitoring and sensing activities. In this paper, we describe our design, evaluate our solution, present experimental results from multi-sensor deployments and discuss the value of this system in future experimentation. △ Less

Submitted 30 May, 2019; originally announced May 2019.

Comments: 13 pages, 13 figures, 3 tables; For additional documentation and source code refer to https://github.com/SPAN-UofU

Quantifying an Interference-Assisted Signal Strength Breathing Surveillance Attack

Authors: Alemayehu Solomon Abrar, Neal Patwari, Aniqua Baset, Sneha Kumar Kasera

Abstract: A malicious attacker could, by taking control of internet-of-things devices, use them to capture received signal strength (RSS) measurements and perform surveillance on a person's vital signs, activities, audio in their environment, and other RF sensing capabilities. This paper considers an attacker who looks for periodic changes in the RSS in order to surveil a person's breathing rate. The challe… ▽ More A malicious attacker could, by taking control of internet-of-things devices, use them to capture received signal strength (RSS) measurements and perform surveillance on a person's vital signs, activities, audio in their environment, and other RF sensing capabilities. This paper considers an attacker who looks for periodic changes in the RSS in order to surveil a person's breathing rate. The challenge to the attacker is that a person's breathing causes a low amplitude change in RSS, and RSS is typically quantized with a significantly larger step size. This paper contributes a lower bound on an attacker's breathing monitoring performance as a function of the RSS step size and sampling frequency so that a designer can understand their relationship. Our bound considers the little-known and counter-intuitive fact that an adversary can improve their sinusoidal parameter estimates by making some devices transmit to add interference power into the RSS measurements. We demonstrate this capability experimentally. As we show, for typical transceivers, the RSS surveillance attack can monitor RSS with remarkable accuracy. New mitigation strategies will be required to prevent RSS surveillance attacks. △ Less

Submitted 10 May, 2019; originally announced May 2019.

Never Use Labels: Signal Strength-Based Bayesian Device-Free Localization in Changing Environments

Authors: Peter Hillyard, Neal Patwari

Abstract: Device-free localization (DFL) methods use measured changes in the received signal strength (RSS) between many pairs of RF nodes to provide location estimates of a person inside the wireless network. Fundamental challenges for RSS DFL methods include having a model of RSS measurements as a function of a person's location, and maintaining an accurate model as the environment changes over time. Curr… ▽ More Device-free localization (DFL) methods use measured changes in the received signal strength (RSS) between many pairs of RF nodes to provide location estimates of a person inside the wireless network. Fundamental challenges for RSS DFL methods include having a model of RSS measurements as a function of a person's location, and maintaining an accurate model as the environment changes over time. Current methods rely on either labeled empty-area calibration or labeled fingerprints with a person at each location. Both need to be frequently recalibrated or retrained to stay current with changing environments. Other DFL methods only localize people in motion. In this paper, we address these challenges by, first, introducing a new mixture model for link RSS as a function of a person's location, and second, providing the framework to update model parameters without ever being provided labeled data from either empty-area or known-location classes. We develop two new Bayesian localization methods based on our mixture model and experimentally validate our system at three test sites with seven days of measurements. We demonstrate that our methods localize a person with non-degrading performance in changing environments, and, in addition, reduce localization error by 11-51% compared to other DFL methods. △ Less

Submitted 12 December, 2018; originally announced December 2018.

Save Our Spectrum: Contact-Free Human Sensing Using Single Carrier Radio

Authors: Alemayehu Solomon Abrar, Anh Luong, Peter Hillyard, Neal Patwari

Abstract: Recent research has demonstrated new capabilities in radio frequency (RF) sensing that apply to health care, smart home, and security applications. However, previous work in RF sensing requires heavy utilization of the radio spectrum, for example, transmitting thousands of WiFi packets per second. In this paper, we present a device-free human sensing system based on received signal strength (RSS)… ▽ More Recent research has demonstrated new capabilities in radio frequency (RF) sensing that apply to health care, smart home, and security applications. However, previous work in RF sensing requires heavy utilization of the radio spectrum, for example, transmitting thousands of WiFi packets per second. In this paper, we present a device-free human sensing system based on received signal strength (RSS) measurements from a low-cost single carrier narrowband radio transceiver. We test and validate its performance in three different applications: real-time heart rate monitoring, gesture recognition, and human speed estimation. The challenges in these applications stem from the very low signal-to-noise ratio and the use of a single-dimensional measurement of the channel. We apply a combination of linear and non-linear filtering, and time-frequency analysis, and develop new estimators to address the challenges in the particular applications. Our experimental results indicate that RF sensing based on single-carrier magnitude measurements performs nearly as well as the state-of-the-art while utilizing three orders of magnitude less bandwidth. △ Less

Submitted 25 November, 2018; originally announced November 2018.

Comments: 13 pages

Comparing Respiratory Monitoring Performance of Commercial Wireless Devices

Authors: Peter Hillyard, Anh Luong, Alemayehu Solomon Abrar, Neal Patwari, Krishna Sundar, Robert Farney, Jason Burch, Christina A. Porucznik, Sarah Hatch Pollard

Abstract: This paper addresses the performance of systems which use commercial wireless devices to make bistatic RF channel measurements for non-contact respiration sensing. Published research has typically presented results from short controlled experiments on one system. In this paper, we deploy an extensive real-world comparative human subject study. We observe twenty patients during their overnight slee… ▽ More This paper addresses the performance of systems which use commercial wireless devices to make bistatic RF channel measurements for non-contact respiration sensing. Published research has typically presented results from short controlled experiments on one system. In this paper, we deploy an extensive real-world comparative human subject study. We observe twenty patients during their overnight sleep (a total of 160 hours), during which contact sensors record ground-truth breathing data, patient position is recorded, and four different RF breathing monitoring systems simultaneously record measurements. We evaluate published methods and algorithms. We find that WiFi channel state information measurements provide the most robust respiratory rate estimates of the four RF systems tested. However, all four RF systems have periods during which RF-based breathing estimates are not reliable. △ Less

Submitted 17 July, 2018; originally announced July 2018.

RSS Models for Respiration Rate Monitoring

Authors: Hüseyin Yiğitler, Ossi Kaltiokallio, Roland Hostettler, Riku Jäntti, Neal Patwari, Simo Särkkä

Abstract: Received signal strength based respiration rate monitoring is emerging as an alternative non-contact technology. These systems make use of the radio measurements of short-range commodity wireless devices, which vary due to the inhalation and exhalation motion of a person. The success of respiration rate estimation using such measurements depends on the signal-to-noise ratio, which alters with prop… ▽ More Received signal strength based respiration rate monitoring is emerging as an alternative non-contact technology. These systems make use of the radio measurements of short-range commodity wireless devices, which vary due to the inhalation and exhalation motion of a person. The success of respiration rate estimation using such measurements depends on the signal-to-noise ratio, which alters with properties of the person and with the measurement system. To date, no model has been presented that allows evaluation of different deployments or system configurations for successful breathing rate estimation. In this paper, a received signal strength model for respiration rate monitoring is introduced. It is shown that measurements in linear and logarithmic scale have the same functional form, and the same estimation techniques can be used in both cases. The implications of the model are validated under varying signal-to-noise ratio conditions using the performances of three estimators: batch frequency estimator, recursive Bayesian estimator, and model-based estimator. The results are in coherence with the findings, and they imply that different estimators are advantageous in different signal-to-noise ratio regimes. △ Less

Submitted 26 November, 2017; originally announced November 2017.

EpiFi: An In-Home Sensor Network Architecture for Epidemiological Studies

Authors: Philip Lundrigan, Kyeong Min, Neal Patwari, Sneha Kasera, Kerry Kelly, Jimmy Moore, Miriah Meyer, Scott C. Collingwood, Flory Nkoy, Bryan Stone, Katherine Sward

Abstract: We design and build a system called EpiFi, which allows epidemiologists to easily design and deploy experiments in homes. The focus of EpiFi is reducing the barrier to entry for deploying and using an in-home sensor network. We present a novel architecture for in-home sensor networks configured using a single configuration file and provide: a fast and reliable method for device discovery when inst… ▽ More We design and build a system called EpiFi, which allows epidemiologists to easily design and deploy experiments in homes. The focus of EpiFi is reducing the barrier to entry for deploying and using an in-home sensor network. We present a novel architecture for in-home sensor networks configured using a single configuration file and provide: a fast and reliable method for device discovery when installed in the home, a new mechanism for sensors to authenticate over the air using a subject's home WiFi router, and data reliability mechanisms to minimize loss in the network through a long-term deployment. We work collaboratively with pediatric asthma researchers to design three studies and deploy EpiFi in homes. △ Less

Submitted 7 September, 2017; originally announced September 2017.

Comments: 13 pages, 12 figures

Detector Based Radio Tomographic Imaging

Authors: Hüseyin Yiğitler, Riku Jäntti, Ossi Kaltiokallio, Neal Patwari

Abstract: Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods solve an associated inverse problem using algebraic or compressed sensing reconstruction algorithms. We propose an alternative imaging method that reconstructs spa… ▽ More Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods solve an associated inverse problem using algebraic or compressed sensing reconstruction algorithms. We propose an alternative imaging method that reconstructs spatial field of occupancy using a back-projection based reconstruction algorithm. The introduced system has the following advantages over the other imaging based methods: i.) significantly lower computational complexity such that no floating point multiplication is required; ii.) each link's measured data is compressed to a single bit, providing improved scalability; iii.) physically significant and repeatable parameters. The proposed method is validated using measurement data. Results show that the proposed method achieves the above advantages without loss of accuracy compared to the other available methods. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Through-Wall Person Localization Using Transceivers in Motion

Authors: Peter Hillyard, Dustin Maas, Sriram Premnath, Neal Patwari, Sneha Kasera

Abstract: We develop novel methods for device-free localization (DFL) using transceivers in motion. Such localization technologies are useful in various cross-layer applications/protocols including those that are related to security situations where it is important to know the presence and position of an unauthorized person; in monitoring the daily activities of elderly or special needs individuals; or in e… ▽ More We develop novel methods for device-free localization (DFL) using transceivers in motion. Such localization technologies are useful in various cross-layer applications/protocols including those that are related to security situations where it is important to know the presence and position of an unauthorized person; in monitoring the daily activities of elderly or special needs individuals; or in emergency situations when police or firefighters can use the locations of people inside of a building in order to save lives. We propose that transceivers mounted on autonomous vehicles could be both quickly deployed and kept moving to ``sweep'' an area for changes in the channel that would indicate the location of moving people and objects. The challenge is that changes to channel measurements are introduced both by changes in the environment and from motion of the transceivers. In this paper, we demonstrate a method to detect human movement despite transceiver motion using ultra-wideband impulse radar (UWB-IR) transceivers. The measurements reliably detect a person's presence on a link line despite small-scale fading. We explore via multiple experiments the ability of mobile UWB-IR transceivers, moving outside of the walls of a room, to measure many lines crossing through the room and accurately locate a person inside within 0.25 m average error. △ Less

Submitted 20 November, 2015; originally announced November 2015.

RTI Goes Wild: Radio Tomographic Imaging for Outdoor People Detection and Localization

Authors: Cesare Alippi, Maurizio Bocca, Giacomo Boracchi, Neal Patwari, Manuel Roveri

Abstract: RF sensor networks are used to localize people indoor without requiring them to wear invasive electronic devices. These wireless mesh networks, formed by low-power radio transceivers, continuously measure the received signal strength (RSS) of the links. Radio Tomographic Imaging (RTI) is a technique that generates 2D images of the change in the electromagnetic field inside the area covered by the… ▽ More RF sensor networks are used to localize people indoor without requiring them to wear invasive electronic devices. These wireless mesh networks, formed by low-power radio transceivers, continuously measure the received signal strength (RSS) of the links. Radio Tomographic Imaging (RTI) is a technique that generates 2D images of the change in the electromagnetic field inside the area covered by the radio transceivers to spot the presence and movements of animates (e.g., people, large animals) or large metallic objects (e.g., cars). Here, we present a RTI system for localizing and tracking people outdoors. Differently than in indoor environments where the RSS does not change significantly with time unless people are found in the monitored area, the outdoor RSS signal is time-variant, e.g., due to rainfalls or wind-driven foliage. We present a novel outdoor RTI method that, despite the nonstationary noise introduced in the RSS data by the environment, achieves high localization accuracy and dramatically reduces the energy consumption of the sensing units. Experimental results demonstrate that the system accurately detects and tracks a person in real-time in a large forested area under varying environmental conditions, significantly reducing false positives, localization error and energy consumption compared to state-of-the-art RTI methods. △ Less

Submitted 30 July, 2014; originally announced July 2014.

dRTI: Directional Radio Tomographic Imaging

Authors: Bo Wei, Ambuj Varshney, Wen Hu, Neal Patwari, Thiemo Voigt, Chun Tung Chou

Abstract: Radio tomographic imaging (RTI) enables device free localisation of people and objects in many challenging environments and situations. Its basic principle is to detect the changes in the statistics of some radio quality measurements in order to infer the presence of people and objects in the radio path. However, the localisation accuracy of RTI suffers from complicated radio propagation behaviour… ▽ More Radio tomographic imaging (RTI) enables device free localisation of people and objects in many challenging environments and situations. Its basic principle is to detect the changes in the statistics of some radio quality measurements in order to infer the presence of people and objects in the radio path. However, the localisation accuracy of RTI suffers from complicated radio propagation behaviours such as multipath fading and shadowing. In order to improve RTI localisation accuracy, we propose to use inexpensive and energy efficient electronically switched directional (ESD) antennas to improve the quality of radio link behaviour observations, and therefore, the localisation accuracy of RTI. We implement a directional RTI (dRTI) system to understand how directional antennas can be used to improve RTI localisation accuracy. We also study the impact of the choice of antenna directions on the localisation accuracy of dRTI and propose methods to effectively choose informative antenna directions to improve localisation accuracy while reducing overhead. We evaluate the performance of dRTI in diverse indoor environments and show that dRTI significantly outperforms the existing RTI localisation methods based on omni-directional antennas. △ Less

Submitted 12 February, 2014; originally announced February 2014.

Dial It In: Rotating RF Sensors to Enhance Radio Tomography

Authors: Maurizio Bocca, Anh Luong, Neal Patwari, Thomas Schmid

Abstract: A radio tomographic imaging (RTI) system uses the received signal strength (RSS) measured by RF sensors in a static wireless network to localize people in the deployment area, without having them to carry or wear an electronic device. This paper addresses the fact that small-scale changes in the position and orientation of the antenna of each RF sensor can dramatically affect imaging and localizat… ▽ More A radio tomographic imaging (RTI) system uses the received signal strength (RSS) measured by RF sensors in a static wireless network to localize people in the deployment area, without having them to carry or wear an electronic device. This paper addresses the fact that small-scale changes in the position and orientation of the antenna of each RF sensor can dramatically affect imaging and localization performance of an RTI system. However, the best placement for a sensor is unknown at the time of deployment. Improving performance in a deployed RTI system requires the deployer to iteratively "guess-and-retest", i.e., pick a sensor to move and then re-run a calibration experiment to determine if the localization performance had improved or degraded. We present an RTI system of servo-nodes, RF sensors equipped with servo motors which autonomously "dial it in", i.e., change position and orientation to optimize the RSS on links of the network. By doing so, the localization accuracy of the RTI system is quickly improved, without requiring any calibration experiment from the deployer. Experiments conducted in three indoor environments demonstrate that the servo-nodes system reduces localization error on average by 32% compared to a standard RTI system composed of static RF sensors. △ Less

Submitted 19 December, 2013; originally announced December 2013.

Comments: 9 pages

Through Wall People Localization Exploiting Radio Windows

Authors: Arijit Banerjee, Dustin Maas, Maurizio Bocca, Neal Patwari, Sneha Kasera

Abstract: We introduce and investigate the ability of an attacker to surreptitiously use an otherwise secure wireless network to detect moving people through walls, in an area in which people expect their location to be private. We call this attack on location privacy of people an "exploiting radio windows" (ERW) attack. We design and implement the ERW attack methodology for through wall people localization… ▽ More We introduce and investigate the ability of an attacker to surreptitiously use an otherwise secure wireless network to detect moving people through walls, in an area in which people expect their location to be private. We call this attack on location privacy of people an "exploiting radio windows" (ERW) attack. We design and implement the ERW attack methodology for through wall people localization that relies on reliably detecting when people cross the link lines by using physical layer measurements between the legitimate transmitters and the attack receivers. We also develop a method to estimate the direction of movement of a person from the sequence of link lines crossed during a short time interval. Additionally, we describe how an attacker may estimate any artificial changes in transmit power (used as a countermeasure), compensate for these power changes using measurements from sufficient number of links, and still detect line crossings. We implement our methodology on WiFi and ZigBee nodes and experimentally evaluate the ERW attack by monitoring people movements through walls in two real-world settings. We find that our methods achieve very high accuracy in detecting line crossings and determining direction of motion. △ Less

Submitted 27 July, 2013; originally announced July 2013.

Catch a Breath: Non-invasive Respiration Rate Monitoring via Wireless Communication

Authors: Ossi Kaltiokallio, Hüseyin Yigitler, Riku Jäntti, Neal Patwari

Abstract: Radio signals are sensitive to changes in the environment, which for example is reflected on the received signal strength (RSS) measurements of low-cost wireless devices. This information has been used effectively in the past years e.g. in device-free localization and tracking. Recent literature has also shown that the fading information of the wireless channel can be exploited to estimate the bre… ▽ More Radio signals are sensitive to changes in the environment, which for example is reflected on the received signal strength (RSS) measurements of low-cost wireless devices. This information has been used effectively in the past years e.g. in device-free localization and tracking. Recent literature has also shown that the fading information of the wireless channel can be exploited to estimate the breathing rate of a person in a non-invasive manner; a research topic we address in this paper. To the best of our knowledge, we demonstrate for the first time that the respiration rate of a person can be accurately estimated using only a single IEEE 802.15.4 compliant TX-RX pair. We exploit channel diversity, low-jitter periodic communication, and oversampling to enhance the breathing estimates, and make use of a decimation filter to decrease the computational requirements of breathing estimation. In addition, we develop a hidden Markov model (HMM) to identify the time instances when breathing estimation is not possible, i.e., during times when other motion than breathing occurs. We experimentally validate the accuracy of the system and the results suggest that the respiration rate can be estimated with a mean error of 0.03 breaths per minute, the lowest breathing rate error reported to date using IEEE 802.15.4 compliant transceivers. We also demonstrate that the breathing of two people can be monitored simultaneously, a result not reported in earlier literature. △ Less

Submitted 7 July, 2013; v1 submitted 29 June, 2013; originally announced July 2013.

Joint Ultra-wideband and Signal Strength-based Through-building Tracking for Tactical Operations

Authors: Merrick McCracken, Maurizio Bocca, Neal Patwari

Abstract: Accurate device free localization (DFL) based on received signal strength (RSS) measurements requires placement of radio transceivers on all sides of the target area. Accuracy degrades dramatically if sensors do not surround the area. However, law enforcement officers sometimes face situations where it is not possible or practical to place sensors on all sides of the target room or building. For e… ▽ More Accurate device free localization (DFL) based on received signal strength (RSS) measurements requires placement of radio transceivers on all sides of the target area. Accuracy degrades dramatically if sensors do not surround the area. However, law enforcement officers sometimes face situations where it is not possible or practical to place sensors on all sides of the target room or building. For example, for an armed subject barricaded in a motel room, police may be able to place sensors in adjacent rooms, but not in front of the room, where the subject would see them. In this paper, we show that using two ultra-wideband (UWB) impulse radios, in addition to multiple RSS sensors, improves the localization accuracy, particularly on the axis where no sensors are placed (which we call the x-axis). We introduce three methods for combining the RSS and UWB data. By using UWB radios together with RSS sensors, it is still possible to localize a person through walls even when the devices are placed only on two sides of the target area. Including the data from the UWB radios can reduce the localization area of uncertainty by more than 60%. △ Less

Submitted 6 March, 2013; originally announced March 2013.

Comments: 9 pages, conference submission

A Multi-Scale Spatial Model for RSS-based Device-Free Localization

Authors: Ossi Kaltiokallio, Maurizio Bocca, Neal Patwari

Abstract: RSS-based device-free localization (DFL) monitors changes in the received signal strength (RSS) measured by a network of static wireless nodes to locate people without requiring them to carry or wear any electronic device. Current models assume that the spatial impact area, i.e., the area in which a person affects a link's RSS, has constant size. This paper shows that the spatial impact area varie… ▽ More RSS-based device-free localization (DFL) monitors changes in the received signal strength (RSS) measured by a network of static wireless nodes to locate people without requiring them to carry or wear any electronic device. Current models assume that the spatial impact area, i.e., the area in which a person affects a link's RSS, has constant size. This paper shows that the spatial impact area varies considerably for each link. Data from extensive experiments are used to derive a multi-scale spatial weight model that is a function of the fade level, i.e., the difference between the predicted and measured RSS, and of the direction of RSS change. In addition, a measurement model is proposed which gives a probability of a person locating inside the derived spatial model for each given RSS measurement. A real-time radio tomographic imaging system is described which uses channel diversity and the presented models. Experiments in an open indoor environment, in a typical one-bedroom apartment and in a through-wall scenario are conducted to determine the accuracy of the system. We demonstrate that the new system is capable of localizing and tracking a person with high accuracy (<0.30 m) in all the environments, without the need to change the model parameters. △ Less

Submitted 24 February, 2013; originally announced February 2013.

Comments: 13 pages

Multiple Target Tracking with RF Sensor Networks

Authors: Maurizio Bocca, Ossi Kaltiokallio, Neal Patwari, Suresh Venkatasubramanian

Abstract: RF sensor networks are wireless networks that can localize and track people (or targets) without needing them to carry or wear any electronic device. They use the change in the received signal strength (RSS) of the links due to the movements of people to infer their locations. In this paper, we consider real-time multiple target tracking with RF sensor networks. We perform radio tomographic imagin… ▽ More RF sensor networks are wireless networks that can localize and track people (or targets) without needing them to carry or wear any electronic device. They use the change in the received signal strength (RSS) of the links due to the movements of people to infer their locations. In this paper, we consider real-time multiple target tracking with RF sensor networks. We perform radio tomographic imaging (RTI), which generates images of the change in the propagation field, as if they were frames of a video. Our RTI method uses RSS measurements on multiple frequency channels on each link, combining them with a fade level-based weighted average. We describe methods to adapt machine vision methods to the peculiarities of RTI to enable real time multiple target tracking. Several tests are performed in an open environment, a one-bedroom apartment, and a cluttered office environment. The results demonstrate that the system is capable of accurately tracking in real-time up to 4 targets in cluttered indoor environments, even when their trajectories intersect multiple times, without mis-estimating the number of targets found in the monitored area. The highest average tracking error measured in the tests is 0.45 m with two targets, 0.46 m with three targets, and 0.55 m with four targets. △ Less

Submitted 11 February, 2013; originally announced February 2013.

Breathfinding: A Wireless Network that Monitors and Locates Breathing in a Home

Authors: Neal Patwari, Lara Brewer, Quinn Tate, Ossi Kaltiokallio, Maurizio Bocca

Abstract: This paper explores using RSS measurements on many links in a wireless network to estimate the breathing rate of a person, and the location where the breathing is occurring, in a home, while the person is sitting, laying down, standing, or slee**. The main challenge in breathing rate estimation is that "motion interference", i.e., movements other than a person's breathing, generally cause larger… ▽ More This paper explores using RSS measurements on many links in a wireless network to estimate the breathing rate of a person, and the location where the breathing is occurring, in a home, while the person is sitting, laying down, standing, or slee**. The main challenge in breathing rate estimation is that "motion interference", i.e., movements other than a person's breathing, generally cause larger changes in RSS than inhalation and exhalation. We develop a method to estimate breathing rate despite motion interference, and demonstrate its performance during multiple short (3-7 minute) tests and during a longer 66 minute test. Further, for the same experiments, we show the location of the breathing person can be estimated, to within about 2 m average error in a 56 square meter apartment. Being able to locate a breathing person who is not otherwise moving, without calibration, is important for applications in search and rescue, health care, and security. △ Less

Submitted 15 February, 2013; originally announced February 2013.

Hidden Markov Estimation of Bistatic Range From Cluttered Ultra-wideband Impulse Responses

Authors: Merrick McCracken, Neal Patwari

Abstract: Ultra-wideband (UWB) multistatic radar can be used for target detection and tracking in buildings and rooms. Target detection and tracking relies on accurate knowledge of the bistatic delay. Noise, measurement error, and the problem of dense, overlap** multipath signals in the measured UWB channel impulse response (CIR) all contribute to make bistatic delay estimation challenging. It is often as… ▽ More Ultra-wideband (UWB) multistatic radar can be used for target detection and tracking in buildings and rooms. Target detection and tracking relies on accurate knowledge of the bistatic delay. Noise, measurement error, and the problem of dense, overlap** multipath signals in the measured UWB channel impulse response (CIR) all contribute to make bistatic delay estimation challenging. It is often assumed that a calibration CIR, that is, a measurement from when no person is present, is easily subtracted from a newly captured CIR. We show this is often not the case. We propose modeling the difference between a current set of CIRs and a set of calibration CIRs as a hidden Markov model (HMM). Multiple experimental deployments are performed to collect CIR data and test the performance of this model and compare its performance to existing methods. Our experimental results show an RMSE of 2.85 ns and 2.76 ns for our HMM-based approach, compared to a thresholding method which, if the ideal threshold is known a priori, achieves 3.28 ns and 4.58 ns. By using the Baum-Welch algorithm, the HMM-based estimator is shown to be very robust to initial parameter settings. Localization performance is also improved using the HMM-based bistatic delay estimates. △ Less

Submitted 5 December, 2012; originally announced December 2012.

Framework of SQL Injection Attack

Authors: Neha Patwari, Parvati Bhurani

Abstract: With the changing demographics of globalization, the emergence and prevalence of web application have acquired a central and pivotal role in the domains of technology and advancements. It thus becomes imperative to probe deeply into the architecture, significance and different facets of usages. Web applications enclose the functioning between a user and the services provided by the server, which c… ▽ More With the changing demographics of globalization, the emergence and prevalence of web application have acquired a central and pivotal role in the domains of technology and advancements. It thus becomes imperative to probe deeply into the architecture, significance and different facets of usages. Web applications enclose the functioning between a user and the services provided by the server, which contains a database as its backend. The user can access the required information through sending a request in the form of text to the web server, which is interpreted by the server side script to construct an SQL. The query is sent to the database which responds in order to generate an HTML page that is sent back to the user. Since the functioning of web application is a dynamic and complicated matter, certain threats to the database security have been registered. One such alarming threat is the prevalence of SQL Injection Attack. Hence a dynamic algorithm is given in this paper for preventing SQL Injection Attacks which is based on context free grammars and compiler parsing techniques. The paper attempts to present the notation of a SQLI Prevent Parser for the prevention of SQL Injection Attacks. This Parser determines the structure of queries and compares whether the queries are functionally equivalent or not. This parser has been used on a sample web application and the results have come out to be positive majors to prevent SQL Injection Attacks. △ Less

Submitted 6 July, 2012; originally announced July 2012.

Comments: 12 pages; http://www.ijascse.in/publications2012

Robust Estimators for Variance-Based Device-Free Localization and Tracking

Authors: Yang Zhao, Neal Patwari

Abstract: Human motion in the vicinity of a wireless link causes variations in the link received signal strength (RSS). Device-free localization (DFL) systems, such as variance-based radio tomographic imaging (VRTI), use these RSS variations in a static wireless network to detect, locate and track people in the area of the network, even through walls. However, intrinsic motion, such as branches moving in th… ▽ More Human motion in the vicinity of a wireless link causes variations in the link received signal strength (RSS). Device-free localization (DFL) systems, such as variance-based radio tomographic imaging (VRTI), use these RSS variations in a static wireless network to detect, locate and track people in the area of the network, even through walls. However, intrinsic motion, such as branches moving in the wind and rotating or vibrating machinery, also causes RSS variations which degrade the performance of a DFL system. In this paper, we propose and evaluate two estimators to reduce the impact of the variations caused by intrinsic motion. One estimator uses subspace decomposition, and the other estimator uses a least squares formulation. Experimental results show that both estimators reduce localization root mean squared error by about 40% compared to VRTI. In addition, the Kalman filter tracking results from both estimators have 97% of errors less than 1.3 m, more than 60% improvement compared to tracking results from VRTI. △ Less

Submitted 26 September, 2011; originally announced October 2011.

Monitoring Breathing via Signal Strength in Wireless Networks

Authors: Neal Patwari, Joey Wilson, Sai Ananthanarayanan P. R., Sneha K. Kasera, Dwayne Westenskow

Abstract: This paper shows experimentally that standard wireless networks which measure received signal strength (RSS) can be used to reliably detect human breathing and estimate the breathing rate, an application we call "BreathTaking". We show that although an individual link cannot reliably detect breathing, the collective spectral content of a network of devices reliably indicates the presence and rate… ▽ More This paper shows experimentally that standard wireless networks which measure received signal strength (RSS) can be used to reliably detect human breathing and estimate the breathing rate, an application we call "BreathTaking". We show that although an individual link cannot reliably detect breathing, the collective spectral content of a network of devices reliably indicates the presence and rate of breathing. We present a maximum likelihood estimator (MLE) of breathing rate, amplitude, and phase, which uses the RSS data from many links simultaneously. We show experimental results which demonstrate that reliable detection and frequency estimation is possible with 30 seconds of data, within 0.3 breaths per minute (bpm) RMS error. Use of directional antennas is shown to improve robustness to motion near the network. △ Less

Submitted 18 September, 2011; originally announced September 2011.

Experimental Performance Evaluation of Location Distinction for MIMO Channels

Authors: Dustin Maas, Neal Patwari, Daryl Wasden, Sneha Kasera, Michael Jensen

Abstract: Location distinction is defined as determining whether or not the position of a device has changed. We introduce methods and metrics for performing location distinction in multiple-input multiple-output (MIMO) wireless networks. Using MIMO channel measurements from two different testbeds, we evaluate the performance of temporal signature-based location distinction with varying system parameters, a… ▽ More Location distinction is defined as determining whether or not the position of a device has changed. We introduce methods and metrics for performing location distinction in multiple-input multiple-output (MIMO) wireless networks. Using MIMO channel measurements from two different testbeds, we evaluate the performance of temporal signature-based location distinction with varying system parameters, and show that it can be applied to MIMO channels with favorable results. In particular, a 2x2 MIMO channel with a bandwidth of 80 MHz allows a 64-fold reduction in miss rate over the SISO channel for a fixed false alarm rate, achieving as small as 4 x 10^-4 probability of false alarm for a 2.4 x 10^-4 probability of missed detection. The very high reliability of MIMO location distinction enables location distinction systems to detect the change in position of a transmitter even when using a single receiver. △ Less

Submitted 8 April, 2011; v1 submitted 16 January, 2011; originally announced January 2011.

Comments: 15 pages, 17 figures

Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation

Authors: Mohammad H. Firooz, Dustin Maas, Junxing Zhang, Neal Patwari, Sneha K. Kasera

Abstract: New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The sy… ▽ More New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The system implementation, using the universal software radio peripheral (USRP) and GNU Radio, is described and compared to previous work. By overcoming computational limitations and performing direct-sequence spread-spectrum (DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive CIR estimation. We validate the channel sounder and present a drive test campaign which measures hundreds of channels between WiFi access points and an in-vehicle receiver in urban and suburban areas. △ Less

Submitted 20 July, 2010; originally announced July 2010.

People-Sensing Spatial Characteristics of RF Sensor Networks

Authors: Neal Patwari, Joey Wilson

Abstract: An "RF sensor" network can monitor RSS values on links in the network and perform device-free localization, i.e., locating a person or object moving in the area in which the network is deployed. This paper provides a statistical model for the RSS variance as a function of the person's position w.r.t. the transmitter (TX) and receiver (RX). We show that the ensemble mean of the RSS variance has a… ▽ More An "RF sensor" network can monitor RSS values on links in the network and perform device-free localization, i.e., locating a person or object moving in the area in which the network is deployed. This paper provides a statistical model for the RSS variance as a function of the person's position w.r.t. the transmitter (TX) and receiver (RX). We show that the ensemble mean of the RSS variance has an approximately linear relationship with the expected total affected power (ETAP). We then use analysis to derive approximate expressions for the ETAP as a function of the person's position, for both scattering and reflection. Counterintuitively, we show that reflection, not scattering, causes the RSS variance contours to be shaped like Cassini ovals. Experimental tests reported here and in past literature are shown to validate the analysis. △ Less

Submitted 10 November, 2009; originally announced November 2009.

ACM Class: C.2.1

Through-Wall Tracking Using Variance-Based Radio Tomography Networks

Authors: Joey Wilson, Neal Patwari

Abstract: This paper presents a new method for imaging, localizing, and tracking motion behind walls in real-time. The method takes advantage of the motion-induced variance of received signal strength measurements made in a wireless peer-to-peer network. Using a multipath channel model, we show that the signal strength on a wireless link is largely dependent on the power contained in multipath components… ▽ More This paper presents a new method for imaging, localizing, and tracking motion behind walls in real-time. The method takes advantage of the motion-induced variance of received signal strength measurements made in a wireless peer-to-peer network. Using a multipath channel model, we show that the signal strength on a wireless link is largely dependent on the power contained in multipath components that travel through space containing moving objects. A statistical model relating variance to spatial locations of movement is presented and used as a framework for the estimation of a motion image. From the motion image, the Kalman filter is applied to recursively track the coordinates of a moving target. Experimental results for a 34-node through-wall imaging and tracking system over a 780 square foot area are presented. △ Less

Submitted 1 October, 2009; v1 submitted 29 September, 2009; originally announced September 2009.

Correlated Link Shadow Fading in Multi-hop Wireless Networks

Authors: Piyush Agrawal, Neal Patwari

Abstract: Accurate representation of the physical layer is required for analysis and simulation of multi-hop networking in sensor, ad hoc, and mesh networks. This paper investigates, models, and analyzes the correlations that exist in shadow fading between links in multi-hop networks. Radio links that are geographically proximate often experience similar environmental shadowing effects and thus have corre… ▽ More Accurate representation of the physical layer is required for analysis and simulation of multi-hop networking in sensor, ad hoc, and mesh networks. This paper investigates, models, and analyzes the correlations that exist in shadow fading between links in multi-hop networks. Radio links that are geographically proximate often experience similar environmental shadowing effects and thus have correlated fading. We describe a measurement procedure and campaign to measure a large number of multi-hop networks in an ensemble of environments. The measurements show statistically significant correlations among shadowing experienced on different links in the network, with correlation coefficients up to 0.33. We propose a statistical model for the shadowing correlation between link pairs which shows strong agreement with the measurements, and we compare the new model with an existing shadowing correlation model of Gudmundson (1991). Finally, we analyze multi-hop paths in three and four node networks using both correlated and independent shadowing models and show that independent shadowing models can underestimate the probability of route failure by a factor of two or greater. △ Less

Submitted 17 April, 2008; v1 submitted 16 April, 2008; originally announced April 2008.

Comments: 26 pages with 10 figures and 2 tables