-
Error Estimators for the Small-Biot Lumped Approximation for the Conduction Dunking Problem
Authors:
Kento Kaneko,
Claude Le Bris,
Anthony T. Patera
Abstract:
We consider the dunking problem: a solid body at uniform temperature $T_{\text i}$ is placed in a environment characterized by farfield temperature $T_\infty$ and spatially uniform time-independent heat transfer coefficient. We permit heterogeneous material composition: spatially dependent density, specific heat, and thermal conductivity. Mathematically, the problem is described by a heat equation…
▽ More
We consider the dunking problem: a solid body at uniform temperature $T_{\text i}$ is placed in a environment characterized by farfield temperature $T_\infty$ and spatially uniform time-independent heat transfer coefficient. We permit heterogeneous material composition: spatially dependent density, specific heat, and thermal conductivity. Mathematically, the problem is described by a heat equation with Robin boundary conditions. The crucial parameter is the Biot number -- a nondimensional heat transfer (Robin) coefficient; we consider the limit of small Biot number.
We introduce first-order and second-order asymptotic approximations (in Biot number) for several quantities of interest, notably the spatial domain average temperature as a function of time; the first-order approximation is simply the standard engineering `lumped' model. We then provide asymptotic error estimates for the first-order and second-order approximations for small Biot number, and also, for the first-order approximation, alternative strict bounds valid for all Biot number. Companion numerical solutions of the heat equation confirm the effectiveness of the error estimates for small Biot number.
The second-order approximation and the first-order and second-order error estimates depend on several functional outputs associated to an elliptic partial differential equation; the latter is derived from Biot-sensitivity analysis of the heat equation eigenproblem in the limit of small Biot number. Most important is $φ$, the only functional output required for the first-order error estimates; $φ$ admits a simple physical interpretation in terms of conduction length scale. We investigate the domain and property dependence of $φ$: most notably, we characterize spatial domains for which the standard lumped-model error criterion -- Biot number (based on volume-to-area length scale) small -- is deficient.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
A Two-Level Parameterized Model-Order Reduction Approach for Time-Domain Elastodynamics
Authors:
Mohamed Aziz Bhouri,
Anthony T. Patera
Abstract:
We present a two-level parameterized Model Order Reduction (pMOR) technique for the linear hyperbolic Partial Differential Equation (PDE) of time-domain elastodynamics. In order to approximate the frequency-domain PDE, we take advantage of the Port-Reduced Reduced-Basis Component (PR-RBC) method to develop (in the offline stage) reduced bases for subdomains; the latter are then assembled (in the o…
▽ More
We present a two-level parameterized Model Order Reduction (pMOR) technique for the linear hyperbolic Partial Differential Equation (PDE) of time-domain elastodynamics. In order to approximate the frequency-domain PDE, we take advantage of the Port-Reduced Reduced-Basis Component (PR-RBC) method to develop (in the offline stage) reduced bases for subdomains; the latter are then assembled (in the online stage) to form the global domains of interest. The PR-RBC approach reduces the effective dimensionality of the parameter space and also provides flexibility in topology and geometry. In the online stage, for each query, we consider a given parameter value and associated global domain. In the first level of reduction, the PR-RBC reduced bases are used to approximate the frequency-domain solution at selected frequencies. In the second level of reduction, these instantiated PR-RBC approximations are used as surrogate truth solutions in a Strong Greedy approach to identify a reduced basis space; the PDE of time-domain elastodynamics is then projected on this reduced space. We provide a numerical example to demonstrate the computational capability and assess the performance of the proposed two-level approach.
△ Less
Submitted 7 October, 2020; v1 submitted 25 February, 2020;
originally announced February 2020.
-
Project Artie: An Artificial Student for Disciplines Informed by Partial Differential Equations
Authors:
Anthony T Patera
Abstract:
We present an Artificial Student, "Artie," for engineering science disciplines in which the mathematical model is a partial differential equation (PDE); Artie considers here the particular case of steady heat conduction. Artie accepts problem statements posed in natural language. Artie provides a symbolic-numeric approximate solution: the PDE field; scalar Quantities of Interest (QoI), expressed a…
▽ More
We present an Artificial Student, "Artie," for engineering science disciplines in which the mathematical model is a partial differential equation (PDE); Artie considers here the particular case of steady heat conduction. Artie accepts problem statements posed in natural language. Artie provides a symbolic-numeric approximate solution: the PDE field; scalar Quantities of Interest (QoI), expressed as functionals of the field. The problem statement will typically not provide explicit guidance as to the equation or approximations which should be invoked. We also present Artie+, who provides the finite element solution to the PDE: the exact solution to within a prescribed tolerance controlled by an a posteriori error estimator.
Artie comprises four technical ingredients. Natural Language Processing: We proceed in two stages, domain-independent Google Natural Language syntax analyzer followed by frame-specific conduction parser. PDE Template: The PDE is exploited by the conduction parser to extract geometry, boundary conditions, and coefficients; subsequent approximations are deduced from this ground-truth description. Problem Classes, Geometry Classes; Components, Systems: A problem class places requirements on spatial domain, boundary conditions, properties, and QoI; associated to each problem class are several geometry classes. A component is an instantiation of the geometry class for prescribed geometric and PDE parameters; a system is represented as an assembly of connected components. Variational Formulation: We consider the weak statement and minimization principle to formulate the PDE and develop suitable approximations; implementation proceeds through static condensation and direct stiffness assembly over component ports.
We describe and illustrate a prototype implementation of Artie and Artie+.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Randomized residual-based error estimators for parametrized equations
Authors:
Kathrin Smetana,
Olivier Zahm,
Anthony T Patera
Abstract:
We propose a randomized a posteriori error estimator for reduced order approximations of parametrized (partial) differential equations. The error estimator has several important properties: the effectivity is close to unity with prescribed lower and upper bounds at specified high probability; the estimator does not require the calculation of stability (coercivity, or inf-sup) constants; the online…
▽ More
We propose a randomized a posteriori error estimator for reduced order approximations of parametrized (partial) differential equations. The error estimator has several important properties: the effectivity is close to unity with prescribed lower and upper bounds at specified high probability; the estimator does not require the calculation of stability (coercivity, or inf-sup) constants; the online cost to evaluate the a posteriori error estimator is commensurate with the cost to find the reduced order approximation; the probabilistic bounds extend to many queries with only modest increase in cost. To build this estimator, we first estimate the norm of the error with a Monte-Carlo estimator using Gaussian random vectors whose covariance is chosen according to the desired error measure, e.g. user-defined norms or quantity of interest. Then, we introduce a dual problem with random right-hand side the solution of which allows us to rewrite the error estimator in terms of the residual of the original equation. In order to have a fast-to-evaluate estimator, model order reduction methods can be used to approximate the random dual solutions. Here, we propose a greedy algorithm that is guided by a scalar quantity of interest depending on the error estimator. Numerical experiments on a multi-parametric Helmholtz problem demonstrate that this strategy yields rather low-dimensional reduced dual spaces.
△ Less
Submitted 23 December, 2018; v1 submitted 27 July, 2018;
originally announced July 2018.
-
A Reduced Basis Technique for Long-Time Unsteady Turbulent Flows
Authors:
Lambert Fick,
Yvon Maday,
Anthony T Patera,
Tommaso Taddei
Abstract:
We present a reduced basis technique for long-time integration of parametrized incompressible turbulent flows. The new contributions are threefold. First, we propose a constrained Galerkin formulation that corrects the standard Galerkin statement by incorporating prior information about the long-time attractor. For explicit and semi-implicit time discretizations, our statement reads as a constrain…
▽ More
We present a reduced basis technique for long-time integration of parametrized incompressible turbulent flows. The new contributions are threefold. First, we propose a constrained Galerkin formulation that corrects the standard Galerkin statement by incorporating prior information about the long-time attractor. For explicit and semi-implicit time discretizations, our statement reads as a constrained quadratic programming problem where the objective function is the Euclidean norm of the error in the reduced Galerkin (algebraic) formulation, while the constraints correspond to bounds for the maximum and minimum value of the coefficients of the $N$-term expansion. Second, we propose an \emph{a posteriori} error indicator, which corresponds to the dual norm of the residual associated with the time-averaged momentum equation. We demonstrate that the error indicator is highly-correlated with the error in mean flow prediction, and can be efficiently computed through an offline/online strategy. Third, we propose a Greedy algorithm for the construction of an approximation space/procedure valid over a range of parameters; the Greedy is informed by the \emph{a posteriori} error indicator developed in this paper. We illustrate our approach and we demonstrate its effectiveness by studying the dependence of a two-dimensional turbulent lid-driven cavity flow on the Reynolds number.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Detergency and its implications for oil emulsion sieving and separation
Authors:
Thomas M. Schutzius,
Christopher Walker,
Tanmoy Maitra,
Romy Schönherr,
Christos Stamatopoulos,
Stefan Jung,
Carlo Antonini,
Hadi Eghlidi,
Julie L. Fife,
Alessandra Patera,
Dominique Derome,
Dimos Poulikakos
Abstract:
Separating petroleum hydrocarbons from water is an important problem to address in order to mitigate the disastrous effects of hydrocarbons on aquatic ecosystems. A rational approach to address the problem of marine oil water separation is to disperse the oil with the aid of surfactants in order to minimize the formation of large slicks at the water surface and to maximize the oil-water interfacia…
▽ More
Separating petroleum hydrocarbons from water is an important problem to address in order to mitigate the disastrous effects of hydrocarbons on aquatic ecosystems. A rational approach to address the problem of marine oil water separation is to disperse the oil with the aid of surfactants in order to minimize the formation of large slicks at the water surface and to maximize the oil-water interfacial area. Here we investigate the fundamental wetting and transport behavior of such surfactant-stabilized droplets and the flow conditions necessary to perform sieving and separation of these stabilized emulsions. We show that, for water soluble surfactants, such droplets are completely repelled by a range of materials (intrinsically underwater superoleophobic) due to the detergency effect; therefore, there is no need for surface micro/nanotexturing or chemical treatment to repel the oil and prevent fouling of the filter. We then simulate and experimentally investigate the effect of emulsion flow rate on the transport and impact behavior of such droplets on rigid meshes to identify the minimum pore opening (w) necessary to filter a droplet with a given diameter (d) in order to minimize the pressure drop across the mesh and therefore maximize the filtering efficiency, which is strongly dependent on w. We define a range of flow conditions and droplet sizes where minimum droplet deformation is to be expected and therefore find that the condition of is sufficient for efficient separation. With this new understanding, we demonstrate the use of a commercially available filter--without any additional surface engineering or functionalization--to separate oil droplets from a surfactant stabilized emulsion with a flux of 11,000 L m$^{-2}$ hr$^{-1}$ bar$^{-1}$. We believe these findings can inform the design of future oil separation materials.
△ Less
Submitted 2 June, 2017;
originally announced June 2017.
-
The role of water in the behavior of wood
Authors:
Dominique Derome,
Ahmad Rafsanjani,
Stefan Hering,
Martin Dressler,
Alessandra Patera,
Christian Lanvermann,
Marjan Sedighi-Gilani,
Falk K. Wittel,
Peter Niemz,
Jan Carmeliet
Abstract:
Wood, due to its biological origin, has the capacity to interact with water. Sorption/desorption of moisture is accompanied with swelling/shrinkage and softening/hardening of its stiffness. The correct prediction of the behavior of wood components undergoing environmental loading requires that the moisture behavior and mechanical behavior of wood are considered in a coupled manner. We propose a co…
▽ More
Wood, due to its biological origin, has the capacity to interact with water. Sorption/desorption of moisture is accompanied with swelling/shrinkage and softening/hardening of its stiffness. The correct prediction of the behavior of wood components undergoing environmental loading requires that the moisture behavior and mechanical behavior of wood are considered in a coupled manner. We propose a comprehensive framework using a fully coupled poromechanical approach, where its multiscale implementation provides the capacity to take into account, directly, the exact geometry of the wood cellular structure, using computational homogenization. A hierarchical model is used to take into account the subcellular composite-like organization of the material. Such advanced modeling requires high resolution experimental data for the appropriate determination of inputs and for its validation. High-resolution x-ray tomography, digital image correlation, and neutron imaging are presented as valuable methods to provide the required information.
△ Less
Submitted 17 September, 2015;
originally announced September 2015.
-
Reduced basis techniques for stochastic problems
Authors:
Sébastien Boyaval,
Claude Le Bris,
Tony Lelièvre,
Yvon Maday,
Ngoc Cuong Nguyen,
Anthony T. Patera
Abstract:
We report here on the recent application of a now classical general reduction technique, the Reduced-Basis approach initiated in [C. Prud'homme, D. Rovas, K. Veroy, Y. Maday, A. T. Patera, and G. Turinici. Reliable real-time solution of parametrized partial differential equations: Reduced-basis output bounds methods. Journal of Fluids Engineering, 124(1):7080, 2002.], to the specific context of d…
▽ More
We report here on the recent application of a now classical general reduction technique, the Reduced-Basis approach initiated in [C. Prud'homme, D. Rovas, K. Veroy, Y. Maday, A. T. Patera, and G. Turinici. Reliable real-time solution of parametrized partial differential equations: Reduced-basis output bounds methods. Journal of Fluids Engineering, 124(1):7080, 2002.], to the specific context of differential equations with random coefficients. After an elementary presentation of the approach, we review two contributions of the authors: [S. Boyaval, C. Le Bris, Y. Maday, N.C. Nguyen, and A.T. Patera. A reduced basis approach for variational problems with stochastic parameters: Application to heat conduction with variable Robin co-efficient. Computer Methods in Applied Mechanics and Engineering, 198(4144):3187-3206, 2009.], which presents the application of the RB approach for the discretization of a simple second order elliptic equation supplied with a random boundary condition, and [S. Boyaval and T. Lelièvre, A variance reduction method for parametrized stochastic differential equations using the reduced basis paradigm with T. Lelièvre, Commun. Math. Sci. 8, special Issue "Mathematical Issue on Complex Fluids" P. Zhang ed., to appear, 2010, ARXIV preprint arXiv:0906.3600], which uses a RB type approach to reduce the variance in the Monte-Carlo simulation of a stochastic differential equation. We conclude the review with some general comments and also discuss possible tracks for further research in the direction.
△ Less
Submitted 2 April, 2010;
originally announced April 2010.