-
Measurement of zero-frequency fluctuations generated by coupling between Alfvén modes in the JET tokamak
Authors:
Juan Ruiz Ruiz,
Jeronimo Garcia,
Michael Barnes,
Mykola Dreval,
Carine Giroud,
Valerian H. Hall-Chen,
Michael R. Hardman,
Jon C. Hillesheim,
Yevgen Kazakov,
Samuele Mazzi,
Felix I. Parra,
Bhavin S. Patel,
Alexander A. Schekochihin,
Ziga Stancar,
the JET Contributors,
the EUROfusion Tokamak Exploitation Team
Abstract:
We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with th…
▽ More
We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, and confinement factor $H_{89,P}$. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
A quasi-linear model of electromagnetic turbulent transport and its application to flux-driven transport predictions for STEP
Authors:
M. Giacomin,
D. Dickinson,
W. Dorland,
N. R. Mandell,
A. Bokshi,
F. J. Casson,
H. G. Dudding,
D. Kennedy,
B. S. Patel,
C. M. Roach
Abstract:
A quasi-linear reduced transport model is developed from a database of high-$β$ electromagnetic nonlinear gyrokinetic simulations performed with Spherical Tokamak for Energy Production (STEP) relevant parameters. The quasi-linear model is fully electromagnetic and accounts for the effect of equilibrium flow shear using a novel approach. Its flux predictions are shown to agree quantitatively with p…
▽ More
A quasi-linear reduced transport model is developed from a database of high-$β$ electromagnetic nonlinear gyrokinetic simulations performed with Spherical Tokamak for Energy Production (STEP) relevant parameters. The quasi-linear model is fully electromagnetic and accounts for the effect of equilibrium flow shear using a novel approach. Its flux predictions are shown to agree quantitatively with predictions from local nonlinear gyrokinetic simulations across a broad range of STEP-relevant local equilibria. This reduced transport model is implemented in the T3D transport solver that is used to perform the first flux-driven simulations for STEP to account for transport from hybrid-KBM turbulence, which dominates over a wide region of the core plasma. Nonlinear gyrokinetic simulations of the final transport steady state from T3D return turbulent fluxes that are consistent with the reduced model, indicating that the quasi-linear model may also be appropriate for describing the transport steady state. Within the assumption considered here, our simulations support the existence of a transport steady state in STEP with a fusion power comparable to that in the burning flat-top of the conceptual design, but do not demonstrate how this state can be accessed.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Flat-top plasma operational space of the STEP power plant
Authors:
E. Tholerus,
F. J. Casson,
S. P. Marsden,
T. Wilson,
D. Brunetti,
P. Fox,
S. J. Freethy,
T. C. Hender,
S. S. Henderson,
A. Hudoba,
K. K. Kirov,
F. Koechl,
H. Meyer,
S. I. Muldrew,
C. Olde,
B. S. Patel,
C. M. Roach,
S. Saarelma,
G. Xia
Abstract:
STEP is a spherical tokamak prototype power plant that is being designed to demonstrate net electric power. The design phase involves the exploitation of plasma models to optimise fusion performance subject to satisfying various physics and engineering constraints. A modelling workflow, including integrated core plasma modelling, MHD stability analysis, SOL and pedestal modelling, coil set and fre…
▽ More
STEP is a spherical tokamak prototype power plant that is being designed to demonstrate net electric power. The design phase involves the exploitation of plasma models to optimise fusion performance subject to satisfying various physics and engineering constraints. A modelling workflow, including integrated core plasma modelling, MHD stability analysis, SOL and pedestal modelling, coil set and free boundary equilibrium solvers, and whole plant design, has been developed to specify the design parameters and to develop viable scenarios. The integrated core plasma model JETTO is used to develop individual flat-top operating points that satisfy imposed criteria for fusion power performance within operational constraints. Key plasma parameters such as normalised beta, Greenwald density fraction, auxiliary power and radiated power have been scanned to scope the operational space and to derive a collection of candidate non-inductive flat-top points. The assumed auxiliary heating and current drive is either from electron cyclotron systems only or a combination of electron cyclotron and electron Bernstein waves. At present stages of transport modelling, there is a large uncertainty in overall confinement for relevant parameter regimes. For each of the two auxiliary heating and current drive systems scenarios, two candidate flat-top points have been developed based on different confinement assumptions, totalling to four operating points. A lower confinement assumption generally suggests operating points in high-density, high auxiliary power regimes, whereas higher confinement would allow access to a broader parameter regime in density and power while maintaining target fusion power performance.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
On the importance of parallel magnetic-field fluctuations for electromagnetic instabilities in STEP
Authors:
D. Kennedy,
C. M. Roach,
M. Giacomin,
P. Ivanov,
T. Adkins,
F. Sheffield,
T. G örler,
A. Bokshi,
D. Dickinson,
H. G. Dudding,
B. S. Patel
Abstract:
[ABRIDGED] This paper discusses the importance of parallel perturbations of the magnetic-field in gyrokinetic simulations of electromagnetic instabilities and turbulence at mid-radius in the burning plasma phase of the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP. Previous studies have revealed the presence of unstable hybrid kinetic ballooning modes (hKBMs) at binormal scal…
▽ More
[ABRIDGED] This paper discusses the importance of parallel perturbations of the magnetic-field in gyrokinetic simulations of electromagnetic instabilities and turbulence at mid-radius in the burning plasma phase of the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP. Previous studies have revealed the presence of unstable hybrid kinetic ballooning modes (hKBMs) at binormal scales approaching the ion Larmor radius. In this STEP plasma it was found that the hKBM requires the inclusion of parallel magnetic-field perturbations to be linearly unstable. Here, the extent to which the inclusion of fluctuations in the parallel magnetic-field can be relaxed is explored through gyrokinetic simulations. In particular, the frequently used MHD approximation (drop** $δ\! B_{\parallel}$ and setting the $\nabla B$ drift frequency equal to the curvature drift frequency) is discussed and simulations explore whether this approximation is useful for modelling STEP plasmas. It is shown that the MHD approximation can reproduce some of the linear properties of the full STEP gyrokinetic system, but is too stable at low $k_y$ and nonlinear simulations using the MHD approximation result in very different transport states. It is demonstrated that the MHD approximation is challenged by the high $β^{\prime}$ values in STEP, and that the approximation improves considerably at lower $β^{\prime}$. Furthermore, it is shown that the sensitivity of STEP to $δ\! B_{\parallel}$ fluctuations is primarily because the plasma sits close to marginality and it is shown that in slightly more strongly driven conditions the hKBM is unstable without $δ\! B_{\parallel}.$ Crucially, it is demonstrated that the state of large transport typically predicted by local electromagnetic gyrokinetic simulations of STEP plasmas is not solely due to $δ\! B_{\parallel}$ physics.
△ Less
Submitted 20 May, 2024; v1 submitted 16 February, 2024;
originally announced February 2024.
-
MedAlign: A Clinician-Generated Dataset for Instruction Following with Electronic Medical Records
Authors:
Scott L. Fleming,
Alejandro Lozano,
William J. Haberkorn,
Jenelle A. **dal,
Eduardo P. Reis,
Rahul Thapa,
Louis Blankemeier,
Julian Z. Genkins,
Ethan Steinberg,
Ashwin Nayak,
Birju S. Patel,
Chia-Chun Chiang,
Alison Callahan,
Zepeng Huo,
Sergios Gatidis,
Scott J. Adams,
Oluseyi Fayanju,
Shreya J. Shah,
Thomas Savage,
Ethan Goh,
Akshay S. Chaudhari,
Nima Aghaeepour,
Christopher Sharp,
Michael A. Pfeffer,
Percy Liang
, et al. (5 additional authors not shown)
Abstract:
The ability of large language models (LLMs) to follow natural language instructions with human-level fluency suggests many opportunities in healthcare to reduce administrative burden and improve quality of care. However, evaluating LLMs on realistic text generation tasks for healthcare remains challenging. Existing question answering datasets for electronic health record (EHR) data fail to capture…
▽ More
The ability of large language models (LLMs) to follow natural language instructions with human-level fluency suggests many opportunities in healthcare to reduce administrative burden and improve quality of care. However, evaluating LLMs on realistic text generation tasks for healthcare remains challenging. Existing question answering datasets for electronic health record (EHR) data fail to capture the complexity of information needs and documentation burdens experienced by clinicians. To address these challenges, we introduce MedAlign, a benchmark dataset of 983 natural language instructions for EHR data. MedAlign is curated by 15 clinicians (7 specialities), includes clinician-written reference responses for 303 instructions, and provides 276 longitudinal EHRs for grounding instruction-response pairs. We used MedAlign to evaluate 6 general domain LLMs, having clinicians rank the accuracy and quality of each LLM response. We found high error rates, ranging from 35% (GPT-4) to 68% (MPT-7B-Instruct), and an 8.3% drop in accuracy moving from 32k to 2k context lengths for GPT-4. Finally, we report correlations between clinician rankings and automated natural language generation metrics as a way to rank LLMs without human review. We make MedAlign available under a research data use agreement to enable LLM evaluations on tasks aligned with clinician needs and preferences.
△ Less
Submitted 24 December, 2023; v1 submitted 27 August, 2023;
originally announced August 2023.
-
Electromagnetic gyrokinetic instabilities in STEP
Authors:
Daniel Kennedy,
Maurizio Giacomin,
Francis J Casson,
David Dickinson,
William A Hornsby,
Bhavin S Patel,
Colin M Roach
Abstract:
We present herein the results of a linear gyrokinetic analysis of electromagnetic microinstabilites in the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP (Spherical Tokamak for Energy Production, https://step.ukaea.uk). We examine a range of flux surfaces between the deep core and the pedestal top for two candidate flat-top operating points of the prototype device. Local linea…
▽ More
We present herein the results of a linear gyrokinetic analysis of electromagnetic microinstabilites in the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP (Spherical Tokamak for Energy Production, https://step.ukaea.uk). We examine a range of flux surfaces between the deep core and the pedestal top for two candidate flat-top operating points of the prototype device. Local linear gyrokinetic analysis is performed to determine the type of microinstabilities that arise under these reactor-relevant conditions. We find that the equilibria are dominated at ion binormal scales by a hybrid version of the Kinetic Ballooning Mode (KBM) instability that has significant linear drive contributions from the ion temperature gradient and from trapped electrons, while collisional Microtearing Modes (MTMs) are sub-dominantly also unstable at similar binormal scales. The hybrid-KBM and MTM exhibit very different radial scales. We study the sensitivity of these instabilities to physics parameters, and discuss potential mechanisms for mitigating them. The results of this investigation are compared to a small set of similar conceptual reactor designs in the literature. A detailed benchmark of the linear results is performed using three gyrokinetic codes; alongside extensive resolution testing and sensitivity to numerical parameters providing confidence in the results of our calculations, and paving the way for detailed nonlinear studies in a companion article.
△ Less
Submitted 5 October, 2023; v1 submitted 4 July, 2023;
originally announced July 2023.
-
On electromagnetic turbulence and transport in STEP
Authors:
Maurizio Giacomin,
Daniel Kennedy,
Francis J Casson,
Ajay C. J.,
David Dickinson,
Bhavin S. Patel,
Colin M. Roach
Abstract:
In this work, we present first-of-their-kind nonlinear local gyrokinetic simulations of electromagnetic turbulence at mid-radius in the burning plasma phase of the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP (Spherical Tokamak for Energy Production). A prior linear analysis in D. Kennedy et al. 2023 Nucl. Fusion 63 126061 reveals the presence of unstable hybrid kinetic ball…
▽ More
In this work, we present first-of-their-kind nonlinear local gyrokinetic simulations of electromagnetic turbulence at mid-radius in the burning plasma phase of the conceptual high-$β$, reactor-scale, tight-aspect-ratio tokamak STEP (Spherical Tokamak for Energy Production). A prior linear analysis in D. Kennedy et al. 2023 Nucl. Fusion 63 126061 reveals the presence of unstable hybrid kinetic ballooning modes, where inclusion of the compressional magnetic field fluctuation, $δB_{\parallel}$, is crucial, and subdominant microtearing modes are found at binormal scales approaching the ion-Larmor radius. Local nonlinear gyrokinetic simulations on the selected surface in the central core region suggest that hybrid kinetic ballooning modes can drive large turbulent transport, and that there is negligible turbulent transport from subdominant microtearing modes when hybrid kinetic ballooning modes are artificially suppressed (through the omission of $δB_{\parallel}$). Nonlinear simulations that include perpendicular equilibrium flow shear can saturate at lower fluxes that are more consistent with the available sources in STEP. This analysis suggests that hybrid kinetic ballooning modes could play an important role in setting the turbulent transport in STEP, and possible mechanisms to mitigate turbulent transport are discussed. Increasing the safety factor or the pressure gradient strongly reduces turbulent transport from hybrid kinetic ballooning modes in the cases considered here. Challenges of simulating electromagnetic turbulence in this high-$β$ regime are highlighted. In particular the observation of radially extended turbulent structures in the absence of equilibrium flow shear motivates future advanced global gyrokinetic simulations that include $δB_\parallel$.
△ Less
Submitted 24 March, 2024; v1 submitted 4 July, 2023;
originally announced July 2023.
-
Nonlinear microtearing modes in MAST and their stochastic layer formation
Authors:
M. Giacomin,
D. Dickinson,
D. Kennedy,
B. S. Patel,
C. M. Roach
Abstract:
First nonlinear gyrokinetic simulations of microtearing modes in the core of a MAST case are performed on two surfaces of the high-collisionality discharge used in Valovič et al. Nucl. Fusion 51.7 (2011) to obtain the favorable energy confinement scaling with collisionality, $τ_E\propto\,ν_*^{-1}$. On the considered surfaces microtearing modes dominate linearly at binormal length scales of the ord…
▽ More
First nonlinear gyrokinetic simulations of microtearing modes in the core of a MAST case are performed on two surfaces of the high-collisionality discharge used in Valovič et al. Nucl. Fusion 51.7 (2011) to obtain the favorable energy confinement scaling with collisionality, $τ_E\propto\,ν_*^{-1}$. On the considered surfaces microtearing modes dominate linearly at binormal length scales of the order of the ion Larmor radius. While the effect of electron collision frequency is moderate in linear simulations, a strong dependence on this parameter is found in nonlinear simulations at $r/a=0.5$, where $r$ and $a$ are the surface and tokamak minor radius, respectively. The dynamics of magnetic islands generated by microtearing modes is analysed, showing that the radial extent of the stochastic region caused by islands overlap** plays an important role in determining the saturation level of the microtearing mode driven heat flux. Local nonlinear gyrokinetic simulations show that the microtearing mode driven heat flux, $Q_e^\mathrm{MTM}$, is largely dominated by magnetic flutter and depends strongly on the magnetic shear, $\hat{s}$. Comparing two surfaces, $r/a=0.5$ and $r/a=0.6$, reveals that $Q_e^\mathrm{MTM}$ is negligible at $r/a=0.5$ ($\hat{s}=0.34$), with the electron temperature gradient driven heat flux, $Q_e^\mathrm{ETG}$, comparable to the experimental electron heat flux, $Q_e^\mathrm{exp}$, while $Q_e^\mathrm{MTM}$ is significantly larger and comparable to $Q_e^\mathrm{ETG}$ and $Q_e^\mathrm{exp}$ at $r/a=0.6$ ($\hat{s}=1.1$). Microtearing modes cause more experimentally significant transport in higher $\hat{s}$ regions and may influence (together with electron temperature gradient modes) the observed scaling of energy confinement time with collisionality (Valovič et al. Nucl. Fusion 51.7 (2011)).
△ Less
Submitted 30 August, 2023; v1 submitted 4 March, 2023;
originally announced March 2023.
-
New linear stability parameter to describe low-$β$ electromagnetic microinstabilities driven by passing electrons in axisymmetric toroidal geometry
Authors:
M. R. Hardman,
F. I. Parra,
B. S. Patel,
C. M. Roach,
J. Ruiz Ruiz,
M. Barnes,
D. Dickinson,
W. Dorland,
J. F. Parisi,
D. St-Onge,
H. Wilson
Abstract:
In magnetic confinement fusion devices, the ratio of the plasma pressure to the magnetic field energy, $β$, can become sufficiently large that electromagnetic microinstabilities become unstable, driving turbulence that distorts or reconnects the equilibrium magnetic field. In this paper, a theory is proposed for electromagnetic, electron-driven linear instabilities that have current layers localis…
▽ More
In magnetic confinement fusion devices, the ratio of the plasma pressure to the magnetic field energy, $β$, can become sufficiently large that electromagnetic microinstabilities become unstable, driving turbulence that distorts or reconnects the equilibrium magnetic field. In this paper, a theory is proposed for electromagnetic, electron-driven linear instabilities that have current layers localised to mode-rational surfaces and binormal wavelengths comparable to the ion gyroradius. The model retains axisymmetric toroidal geometry with arbitrary sha**, and consists of orbit-averaged equations for the mode-rational surface layer, with a ballooning space kinetic matching condition for passing electrons. The matching condition connects the current layer to the large scale electromagnetic fluctuations, and is derived in the limit that $β$ is comparable to the square root of the electron-to-ion-mass ratio. Electromagnetic fluctuations only enter through the matching condition, allowing for the identification of an effective $β$ that includes the effects of equilibrium flux surface sha**. The scaling predictions made by the asymptotic theory are tested with comparisons to results from linear simulations of micro-tearing and electrostatic microinstabilities in MAST discharge #6252, showing excellent agreement. In particular, it is demonstrated that the effective $β$ can explain the dependence of the local micro-tearing mode (MTM) growth rate on the ballooning parameter $θ_0$ -- possibly providing a route to optimise local flux surfaces for reduced MTM-driven transport.
△ Less
Submitted 22 February, 2023; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Linear gyrokinetic stability of a high $β$ non-inductive spherical tokamak
Authors:
B. S. Patel,
D. Dickinson,
C. M. Roach,
H. R. Wilson
Abstract:
Spherical tokamaks (STs) have been shown to possess properties desirable for a fusion power plant such as achieving high plasma ? and having increased vertical stability. To understand the confinement properties that might be expected in the conceptual design for a high $β$ ST fusion reactor, a 1GW ST plasma equilibrium was analysed using local linear gyrokinetics to determine the type of micro-in…
▽ More
Spherical tokamaks (STs) have been shown to possess properties desirable for a fusion power plant such as achieving high plasma ? and having increased vertical stability. To understand the confinement properties that might be expected in the conceptual design for a high $β$ ST fusion reactor, a 1GW ST plasma equilibrium was analysed using local linear gyrokinetics to determine the type of micro-instabilities that arise. Kinetic ballooning modes (KBMs) and micro-tearing modes (MTMs) are found to be the dominant instabilities. The parametric dependence of these linear modes was determined and from the insights gained, the equilibrium was tuned to find a regime marginally stable to all micro-instabilities at $θ_0$ = 0:0. This work identifies the most important micro-instabilities expected to generate turbulent transport in high $β$ STs. The impact of such modes must be faithfully captured in first principles based reduced models of anomalous transport that are needed for predictive simulations.
△ Less
Submitted 25 August, 2021;
originally announced August 2021.
-
Re-examining the Role of Nuclear Fusion in a Renewables-Based Energy Mix
Authors:
T. E. G. Nicholas,
T. P. Davis,
F. Federici,
J. E. Leland,
B. S. Patel,
C. Vincent,
S. H. Ward
Abstract:
Fusion energy is often regarded as a long-term solution to the world's energy needs. However, even after solving the critical research challenges, engineering and materials science will still impose significant constraints on the characteristics of a fusion power plant. Meanwhile, the global energy grid must transition to low-carbon sources by 2050 to prevent the worst effects of climate change. W…
▽ More
Fusion energy is often regarded as a long-term solution to the world's energy needs. However, even after solving the critical research challenges, engineering and materials science will still impose significant constraints on the characteristics of a fusion power plant. Meanwhile, the global energy grid must transition to low-carbon sources by 2050 to prevent the worst effects of climate change. We review three factors affecting fusion's future trajectory: (1) the significant drop in the price of renewable energy, (2) the intermittency of renewable sources and implications for future energy grids, and (3) the recent proposition of intermediate-level nuclear waste as a product of fusion. Within the scenario assumed by our premises, we find that while there remains a clear motivation to develop fusion power plants, this motivation is likely weakened by the time they become available. We also conclude that most current fusion reactor designs do not take these factors into account and, to increase market penetration, fusion research should consider relaxed nuclear waste design criteria, raw material availability constraints and load-following designs with pulsed operation.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.