-
Probing Gigahertz Coherent Acoustic Phonons in TiO$_{2}$ Mesoporous Thin Films
Authors:
E. R. Cardozo de Oliveira,
C. Xiang,
M. Esmann,
N. Lopez Abdala,
M. C. Fuertes,
A. Bruchhausen,
H. Pastoriza,
B. Perrin,
G. J. A. A. Soler-Illia,
N. D. Lanzillotti-Kimura
Abstract:
Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90…
▽ More
Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. In contrast, mesoporous thin films are based on inexpensive wet chemical fabrication techniques. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90 GHz, and quality factors from 3 to 7. Numerical simulations show a good agreement with the picosecond ultrasonics experiments. We also numerically study the effect of changes in the speed of sound on the performance of the resonator. This change could be induced by liquid infiltration into the mesopores. Our findings constitute the first step towards the engineering of building blocks based on mesoporous thin films for reconfigurable optoacoustic sensors.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
QUBIC IV: Performance of TES Bolometers and Readout Electronics
Authors:
M. Piat,
G. Stankowiak,
E. S. Battistelli,
P. de Bernardis,
G. D Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
T. D. Hoang,
S. Marnieros,
S. Masi,
A. Mennella,
L. Mousset,
C. O Sullivan,
D. Prele,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi
, et al. (104 additional authors not shown)
Abstract:
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are…
▽ More
A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry.
△ Less
Submitted 20 October, 2021; v1 submitted 17 January, 2021;
originally announced January 2021.
-
QUBIC I: Overview and ScienceProgram
Authors:
J. -Ch. Hamilton,
L. Mousset,
E. S. Battistelli,
M. -A. Bigot-Sazy,
P. Chanial,
R. Charlassier,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
L. Grandsire,
S. Lau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Riccardi,
C. Scóccola,
M. Stolpovskiy,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (105 additional authors not shown)
Abstract:
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo…
▽ More
The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$.
△ Less
Submitted 26 August, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
QUBIC II: Spectro-Polarimetry with Bolometric Interferometry
Authors:
L. Mousset,
M. M. Gamboa Lerena,
E. S. Battistelli,
P. de Bernardis,
P. Chanial,
G. D'Alessandro,
G. Dashyan,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
F. Incardona,
S. Landau,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
M. Piat,
G. Ricciardi,
C. G. Scóccola,
M. Stolpovskiy,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (106 additional authors not shown)
Abstract:
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg…
▽ More
Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust map** and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.
△ Less
Submitted 28 March, 2022; v1 submitted 28 October, 2020;
originally announced October 2020.
-
QUBIC VII: The feedhorn-switch system of the technological demonstrator
Authors:
F. Cavaliere,
A. Mennella,
M. Zannoni,
P. Battaglia,
E. S. Battistelli,
D. Burke,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
C. Franceschet,
L. Grandsire,
J. -Ch. Hamilton,
B. Maffei,
E. Manzan,
S. Marnieros,
S. Masi,
C. O'Sullivan,
A. Passerini,
F. Pezzotta,
M. Piat,
A. Tartari,
S. A. Torchinsky,
D. Viganò,
F. Voisin,
P. Ade
, et al. (106 additional authors not shown)
Abstract:
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration…
▽ More
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.
△ Less
Submitted 1 April, 2022; v1 submitted 28 August, 2020;
originally announced August 2020.
-
QUBIC VI: cryogenic half wave plate rotator, design and performances
Authors:
G. D'Alessandro,
L. Mele,
F. Columbro,
G. Amico,
E. S. Battistelli,
P. de Bernardis,
A. Coppolecchia,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
L. Lamagna,
S. Marnieros,
S. Masi,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
G. Pisano,
G. Presta,
A. Tartari,
S. A. Torchinsky,
F. Voisin,
M. Zannoni,
P. Ade
, et al. (104 additional authors not shown)
Abstract:
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t…
▽ More
Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).
△ Less
Submitted 19 November, 2020; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC V: Cryogenic system design and performance
Authors:
S. Masi,
E. S. Battistelli,
P. de Bernardis,
C. Chapron,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
L. Mele,
A. May,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
L. Piccirillo,
G. Presta,
A. Schillaci,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (104 additional authors not shown)
Abstract:
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe…
▽ More
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.
△ Less
Submitted 25 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
QUBIC VIII: Optical design and performance
Authors:
C. O'Sullivan,
M. De Petris,
G. Amico,
E. S. Battistelli,
D. Burke,
D. Buzi,
C. Chapron,
L. Conversi,
G. D'Alessandro,
P. de Bernardis,
M. De Leo,
D. Gayer,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
S. Masi,
A. Mattei,
A. Mennella,
L. Mousset,
J. D. Murphy,
A. Pelosi,
M. Perciballi,
M. Piat,
S. Scully,
A. Tartari
, et al. (104 additional authors not shown)
Abstract:
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p…
▽ More
The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper.
△ Less
Submitted 25 August, 2021; v1 submitted 23 August, 2020;
originally announced August 2020.
-
QUBIC III: Laboratory Characterization
Authors:
S. A. Torchinsky,
J. -Ch. Hamilton,
M. Piat,
E. S. Battistelli,
C. Chapron,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
M. M. Gamboa Lerena,
M. González,
L. Grandsire,
S. Masi,
S. Marnieros,
A. Mennella,
L. Mousset,
J. D. Murphy,
D. Prêle,
G. Stankowiak,
C. O'Sullivan,
A. Tartari,
J. -P. Thermeau,
F. Voisin,
M. Zannoni,
P. Ade,
J. G. Alberro
, et al. (103 additional authors not shown)
Abstract:
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,…
▽ More
A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations.
△ Less
Submitted 15 March, 2022; v1 submitted 23 August, 2020;
originally announced August 2020.
-
Mesoporous Thin-Films for Acoustic Devices in the Gigahertz Range
Authors:
N. Lopez-Abdala,
M. Esmann,
M. C. Fuertes,
P. C. Angelomé,
O. Ortiz,
A. Bruchhausen,
H. Pastoriza,
B. Perrin,
G. J. A. A. Soler-Illia,
N. D. Lanzillotti-Kimura
Abstract:
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoac…
▽ More
The coherent manipulation of acoustic waves on the nanoscale usually requires multilayers with thicknesses and interface roughness defined down to the atomic monolayer. This results in expensive devices with predetermined functionality. Nanoscale mesoporous materials present high surface-to-volume ratio and tailorable mesopores, which allow the incorporation of chemical functionalization to nanoacoustics. However, the presence of pores with sizes comparable to the acoustic wavelength is intuitively perceived as a major roadblock in nanoacoustics. Here we present multilayered nanoacoustic resonators based on mesoporous SiO$_2$ thin-films showing acoustic resonances in the 5-100 GHz range. We characterize the acoustic response of the system using coherent phonon generation experiments. Despite resonance wavelengths comparable to the pore size, we observe for the first time unexpectedly well-defined acoustic resonances with Q-factors around 10. Our results open the path to a promising platform for nanoacoustic sensing and reconfigurable acoustic nanodevices based on soft, inexpensive fabrication methods.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
QUBIC: the Q & U Bolometric Interferometer for Cosmology
Authors:
E. S. Battistelli,
P. Ade,
J. G. Alberro,
A. Almela,
G. Amico,
L. H. Arnaldi,
D. Auguste,
J. Aumont,
S. Azzoni,
S. Banfi,
P. Battaglia,
A. Baù,
B. Bèlier,
D. Bennett,
L. Bergè,
J. -Ph. Bernard,
M. Bersanelli,
M. -A. Bigot-Sazy,
N. Bleurvacq,
J. Bonaparte,
J. Bonis,
A. Bottani,
E. Bunn,
D. Burke,
D. Buzi
, et al. (114 additional authors not shown)
Abstract:
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr…
▽ More
The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Magnetic hysteresis behavior of granular manganite La$_{0.67}$Ca$_{0.33}$MnO$_3$ nanotubes
Authors:
M. I. Dolz,
S. D. Calderón Rivero,
H. Pastoriza,
F. Romá
Abstract:
A silicon micromechanical torsional oscillator is used to measure the hysteresis loops of two manganite La_0.67Ca_0.33MnO_3 nanotubes at different temperatures, applying an external field along its main axes. These structures are composed of nanograins with a ferromagnetic core surrounded by a dead layer. Micromagnetic calculations based on the stochastic Landau-Lifshitz-Gilbert equation, are perf…
▽ More
A silicon micromechanical torsional oscillator is used to measure the hysteresis loops of two manganite La_0.67Ca_0.33MnO_3 nanotubes at different temperatures, applying an external field along its main axes. These structures are composed of nanograins with a ferromagnetic core surrounded by a dead layer. Micromagnetic calculations based on the stochastic Landau-Lifshitz-Gilbert equation, are performed to validate a simple model that allows for quantitatively describing the ferromagnetic behavior of the system. Further simulations are used to analyze the experimental data more in depth and to calculate the coercive field, the saturation and remanent magnetizations, and the effective magnetic volume for single nanotubes, over a wide temperature range.
△ Less
Submitted 15 May, 2020; v1 submitted 18 December, 2019;
originally announced December 2019.
-
QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB
Authors:
M. Piat,
B. Bélier,
L. Bergé,
N. Bleurvacq,
C. Chapron,
S. Dheilly,
L. Dumoulin,
M. González,
L. Grandsire,
J. -Ch. Hamilton,
S. Henrot-Versillé,
D. T. Hoang,
S. Marnieros,
W. Marty,
L. Montier,
E. Olivieri,
C. Oriol,
C. Perbost,
D. Prêle,
D. Rambaud,
M. Salatino,
G. Stankowiak,
J. -P. Thermeau,
S. Torchinsky,
F. Voisin
, et al. (113 additional authors not shown)
Abstract:
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec…
▽ More
QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province.
The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128.
The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.
△ Less
Submitted 9 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Enhancement of penetration field in vortex nanocrystals due to Andreev bound states
Authors:
M. I. Dolz,
N. R. Cejas Bolecek,
J. Puig,
H. Pastoriza,
G. Nieva,
J. Guimpel,
C. J. van der Beek,
M. Konczykowski,
Y. Fasano
Abstract:
We study the penetration field $H_{\rm P}$ for vortex nanocrystals nucleated in micron-sized samples with edges aligned along the nodal and anti-nodal directions of the d-wave superconducting parameter of Bi$_2$Sr$_2$CaCu$_2$O$_{8 - δ}$. Here we present evidence that the $H_{\rm P}$ for nanocrystals nucleated in samples with edges parallel to the nodal direction is larger than for the antinodal ca…
▽ More
We study the penetration field $H_{\rm P}$ for vortex nanocrystals nucleated in micron-sized samples with edges aligned along the nodal and anti-nodal directions of the d-wave superconducting parameter of Bi$_2$Sr$_2$CaCu$_2$O$_{8 - δ}$. Here we present evidence that the $H_{\rm P}$ for nanocrystals nucleated in samples with edges parallel to the nodal direction is larger than for the antinodal case, $\sim 72$\,\% at low temperatures. This finding supports the theoretical proposal that surface Andreev bound states appearing in a sample with edges parallel to the nodal direction would produce an anomalous Meissner current that increases the Bean-Livingston barrier for vortex penetration.This has been detected thanks to the nucleation of vortex nanocrystals with a significant surface-to-volume ratio.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Entropy jump at the first-order vortex phase transition in Bi2Sr2CaCu2O8+δ with columnar defects
Authors:
G. Rumi,
L. J. Albornoz,
P. Pedrazzini,
M. I. Dolz,
H. Pastoriza,
C. J. van der Beek,
M. Konczykowski,
Y. Fasano
Abstract:
We study the entropy jump associated with the first-order vortex melting transition (FOT) in Bi2Sr2CaCu2O8+δ crystals by means of Hall probe magnetometry. The samples present a diluted distribution of columnar defects (CD) introduced by irradiation with Xe ions. The FOT is detected in ac transmittivity measurements as a paramagnetic peak, the height of which is proportional to the enthalpy differe…
▽ More
We study the entropy jump associated with the first-order vortex melting transition (FOT) in Bi2Sr2CaCu2O8+δ crystals by means of Hall probe magnetometry. The samples present a diluted distribution of columnar defects (CD) introduced by irradiation with Xe ions. The FOT is detected in ac transmittivity measurements as a paramagnetic peak, the height of which is proportional to the enthalpy difference entailed by the transition. By applying the Clausius-Clapeyron relation, we quantify the evolution of the entropy jump Δs as a function of the FOT temperature, TFOT, in both pristine crystals and crystals with CD. On increasing the density of CD, Δs decreases monotonically with respect to values found in pristine samples. The Δs versus TFOT dependence in the case of pristine samples follows reasonably well the theoretical prediction of dominant electromagnetic coupling for a model neglecting the effect of disorder. The data for samples with a diluted distribution of CD are not properly described by such a theoretical model.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer
Authors:
Aniello Mennella,
Peter Ade,
Giorgio Amico,
Didier Auguste,
Jonathan Aumont,
Stefano Banfi,
Gustavo Barbaràn,
Paola Battaglia,
Elia Battistelli,
Alessandro Baù,
Benoit Bélier,
David G. Bennett,
Laurent Bergé,
Jean Philippe Bernard,
Marco Bersanelli,
Marie Anne Bigot Sazy,
Nathat Bleurvacq,
Juan Bonaparte,
Julien Bonis,
Emory F. Bunn,
David Burke,
Daniele Buzi,
Alessandro Buzzelli,
Francesco Cavaliere,
Pierre Chanial
, et al. (105 additional authors not shown)
Abstract:
In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its…
▽ More
In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020.
△ Less
Submitted 23 January, 2019; v1 submitted 30 November, 2018;
originally announced December 2018.
-
Thermal architecture for the QUBIC cryogenic receiver
Authors:
A. J. May,
C. Chapron,
G. Coppi,
G. D'Alessandro,
P. de Bernardis,
S. Masi,
S. Melhuish,
M. Piat,
L. Piccirillo,
A. Schillaci,
J. -P. Thermeau,
P. Ade,
G. Amico,
D. Auguste,
J. Aumont,
S. Banfi,
G. Barbara,
P. Battaglia,
E. Battistelli,
A. Bau,
B. Belier,
D. Bennett,
L. Berge,
J. -Ph. Bernard,
M. Bersanelli
, et al. (105 additional authors not shown)
Abstract:
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt…
▽ More
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Design and implementation of a micro-coil induction magnetometer
Authors:
R. V. Ibañez Bustos,
S. D. Calderón Rivero,
F. Romá,
H. Pastoriza,
M. I. Dolz
Abstract:
We present a micron-sized induction magnetometer designed to measure the magnetic response of superconducting mesoscopic samples. The device is manufactured using the Memscap PolyMUMPs process and consists of two octagonal planar parallel micro-coils covering an area of 240 microns X 240 microns, which are separated by only 2.75 microns. We show that this design is sufficiently sensitive to detect…
▽ More
We present a micron-sized induction magnetometer designed to measure the magnetic response of superconducting mesoscopic samples. The device is manufactured using the Memscap PolyMUMPs process and consists of two octagonal planar parallel micro-coils covering an area of 240 microns X 240 microns, which are separated by only 2.75 microns. We show that this design is sufficiently sensitive to detect the Meissner transition at zero dc field, of a high-Tc superconductor Bi2Sr2CaCu2O8 disk of 40 microns in diameter and 1 micron in thicknesses.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Excess of topological defects induced by confinement in vortex nanocrystals
Authors:
N. R. Cejas Bolecek,
M. I. Dolz,
H. Pastoriza,
M. Konczykowski,
C. J. van der Beek,
A. B. Kolton,
Y. Fasano
Abstract:
We directly image individual vortex positions in nanocrystals in order to unveil the structural property that contributes to the depletion of the entropy-jump entailed at the first-order transition. On reducing the nanocrystal size the density of topological defects increases near the edges over a characteristic length. Within this "healing-length" distance from the sample edge vortex rows tend to…
▽ More
We directly image individual vortex positions in nanocrystals in order to unveil the structural property that contributes to the depletion of the entropy-jump entailed at the first-order transition. On reducing the nanocrystal size the density of topological defects increases near the edges over a characteristic length. Within this "healing-length" distance from the sample edge vortex rows tend to bend while towards the center of the sample the positional order of the vortex structure is what is expected for the Bragg-glass phase. This suggests that the healing-length may be a key quantity to model the entropy-jump depletion in the first-order transition of extremely-layered vortex nanocrystals.
△ Less
Submitted 4 April, 2017;
originally announced April 2017.
-
Vortex matter freezing in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ samples with a very dense distribution of columnar defects
Authors:
N. R. Cejas Bolecek,
A. B. Kolton,
M. Konczykowski,
H. Pastoriza,
D. Domínguez,
Y. Fasano
Abstract:
We show that the dynamical freezing of vortex structures nucleated at diluted densities in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ samples with a dense distribution of columnar defects, $B \sim 10^{-2} B_Φ$ with $B_Φ=5$\,kG, results in configurations with liquid-like correlations. We propose a freezing model considering a relaxation dynamics dominated by double-kink excitations driven by the local stres…
▽ More
We show that the dynamical freezing of vortex structures nucleated at diluted densities in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ samples with a dense distribution of columnar defects, $B \sim 10^{-2} B_Φ$ with $B_Φ=5$\,kG, results in configurations with liquid-like correlations. We propose a freezing model considering a relaxation dynamics dominated by double-kink excitations driven by the local stresses obtained directly from experimental images. With this model we estimate the relaxation barrier and the freezing temperature. We argue that the low-field frozen vortex structures nucleated in a dense distribution of columnar defects thus correspond to an out-of-equilibrium non-entangled liquid with strongly reduced mobility rather than to a snapshot of a metastable state with divergent activation barriers as for instance expected for the Bose-glass phase at equilibrium.
△ Less
Submitted 8 February, 2016;
originally announced February 2016.
-
Size-induced depression of first-order transition lines and entropy-jump in extremely-layered nanocrystalline vortex matter
Authors:
M. I. Dolz,
Y. Fasano,
N. R. Cejas Bolecek,
H. Pastoriza,
V. Mosser,
M. Li,
M. Konczykowski
Abstract:
We detect the persistence of the solidification and order-disorder first-order transition lines in the phase diagram of nanocrystalline Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter down to a system size of less than hundred vortices. The temperature-location of the vortex solidification transition line is not altered by decreasing the sample size although there is a depletion of the entropy-jum…
▽ More
We detect the persistence of the solidification and order-disorder first-order transition lines in the phase diagram of nanocrystalline Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter down to a system size of less than hundred vortices. The temperature-location of the vortex solidification transition line is not altered by decreasing the sample size although there is a depletion of the entropy-jump at the transition with respect to macroscopic vortex matter. The solid order-disorder phase transition field moves upward on decreasing the system size due to the increase of the surface-to-volume ratio of vortices entailing a decrease on the average vortex binding energy.
△ Less
Submitted 2 February, 2016;
originally announced February 2016.
-
Thermodynamic evidence for the Bose glass transition in twinned YBa$_2$Cu$_3$O$_{7-δ}$ crystals
Authors:
D. J. Pérez-Morelo,
E. Osquiguil,
A. B. Kolton,
G. Nieva,
I. W. Jung,
D. López,
H. Pastoriza
Abstract:
We used a micromechanical torsional oscillator to measure the magnetic response of a twinned YBa$_2$Cu$_3$O$_{7-δ}$ single crystal disk near the Bose glass transition. We observe an anomaly in the temperature dependence of the magnetization consistent with the appearance of a magnetic shielding perpendicular to the correlated pinning of the twin boundaries. This effect is related to the thermodyna…
▽ More
We used a micromechanical torsional oscillator to measure the magnetic response of a twinned YBa$_2$Cu$_3$O$_{7-δ}$ single crystal disk near the Bose glass transition. We observe an anomaly in the temperature dependence of the magnetization consistent with the appearance of a magnetic shielding perpendicular to the correlated pinning of the twin boundaries. This effect is related to the thermodynamic transition from the vortex liquid phase to a Bose glass state.
△ Less
Submitted 14 July, 2015;
originally announced July 2015.
-
Detection of discretized single-shell penetration in mesoscopic vortex matter
Authors:
Moira Inés Dolz,
Yanina Fasano,
Néstor René Cejas Bolecek,
Hernán Pastoriza,
Marcin Konczykowski,
Cornelius Jacominus van der Beek
Abstract:
We investigated configurational changes in mesoscopic vortex matter with less than thousand vortices during flux penetration in freestanding 50 $μ$m diameter disks of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$. High-resolution AC and DC local magnetometry data reveal oscillations in the transmittivity echoed in peaks in the third-harmonics magnetic signal fainting on increasing vortex density. By means…
▽ More
We investigated configurational changes in mesoscopic vortex matter with less than thousand vortices during flux penetration in freestanding 50 $μ$m diameter disks of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$. High-resolution AC and DC local magnetometry data reveal oscillations in the transmittivity echoed in peaks in the third-harmonics magnetic signal fainting on increasing vortex density. By means of extra experimental evidence and a simple geometrical analysis we show that these features fingerprint the discretized entrance of single-shells of vortices having a shape that mimics the sample edge.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Effect of quenched disorder in the entropy-jump at the first-order vortex phase transition of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$
Authors:
M. I. Dolz,
P. Pedrazzini,
H. Pastoriza,
M. Konczykowski,
Y. Fasano
Abstract:
We study the effect of quenched disorder in the thermodynamic magnitudes entailed in the first-order vortex phase transition of the extremely layered Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$ compound. We track the temperature-evolution of the enthalpy and the entropy-jump at the vortex solidification transition by means of AC local magnetic measurements. Quenched disorder is introduced to the pristin…
▽ More
We study the effect of quenched disorder in the thermodynamic magnitudes entailed in the first-order vortex phase transition of the extremely layered Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 + δ}$ compound. We track the temperature-evolution of the enthalpy and the entropy-jump at the vortex solidification transition by means of AC local magnetic measurements. Quenched disorder is introduced to the pristine samples by means of heavy-ion irradiation with Pb and Xe producing a random columnar-track pins distribution with different densities (matching field $B_Φ$). In contrast with previous magneto-optical reports, we find that the first-order phase transition persists for samples with $B_Φ$ up to 100\,Gauss. For very low densities of quenched disorder (pristine samples), the evolution of the thermodynamic properties can be satisfactorily explained considering a negligible effect of pinning and only electromagnetic coupling between pancake vortices lying in adjacent CuO planes. This description is not satisfactory on increasing magnitude of quenched disorder.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Geometrical confinement effects in layered mesoscopic vortex-matter
Authors:
N. R. Cejas Bolecek,
M. I. Dolz,
A. Kolton,
H. Pastoriza,
C. J. van der Beek,
M. Konczykowski,
M. Menghini,
F. de la Cruz,
G. Nieva,
Y. Fasano
Abstract:
We study geometrical confinement effects in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$ mesoscopic vortex-matter with edge-to-surface ratio of $7-12$%. Samples have in-plane square and circular edges, 30\,$μ$m widths, and $\sim 2\,μ$m thickness. Direct vortex imaging reveals the compact planes of the structure align with the sample edge by introducing topological defects. The defects density is larger fo…
▽ More
We study geometrical confinement effects in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8 +δ}$ mesoscopic vortex-matter with edge-to-surface ratio of $7-12$%. Samples have in-plane square and circular edges, 30\,$μ$m widths, and $\sim 2\,μ$m thickness. Direct vortex imaging reveals the compact planes of the structure align with the sample edge by introducing topological defects. The defects density is larger for circular than for square edges. Molecular dynamics simulations suggest this density is not an out-of-equilibrium property but rather determined by the geometrical confinement.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Latent-heat and non-linear vortex liquid at the vicinity of the first-order phase transition in layered high-Tc superconductors
Authors:
M. I. Dolz,
Y. Fasano,
H. Pastoriza,
V. Mosser,
M. Li,
M. Konczykowski
Abstract:
In this work we revisit the vortex matter phase diagram in layered superconductors solving still open questions by means of AC and DC local magnetic measurements in the paradigmatic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ compound. We show that measuring with AC magnetic techniques is mandatory in order to probe the bulk response of vortex matter, particularly at high-temperatures where surface barriers…
▽ More
In this work we revisit the vortex matter phase diagram in layered superconductors solving still open questions by means of AC and DC local magnetic measurements in the paradigmatic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ compound. We show that measuring with AC magnetic techniques is mandatory in order to probe the bulk response of vortex matter, particularly at high-temperatures where surface barriers for vortex entrance dominate. From the $T_{\rm FOT}$-evolution of the enthalpy and latent-heat at the transition we find that, contrary to previous reports, the nature of the dominant interlayer coupling is electromagnetic in the whole temperature range. By studying the dynamic properties of the phase located at $T \gtrsim T_{\rm FOT}$, we reveal the spanning in a considerable fraction of the phase diagram of a non-linear vortex phase suggesting bulk pinning might play a role even in the liquid vortex phase.
△ Less
Submitted 16 May, 2014;
originally announced May 2014.
-
Disorder, critical currents, and vortex pinning energies in isovalently substituted BaFe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$
Authors:
Sultan Demirdis,
Yanina Fasano,
Shigeru Kasahara,
Takahito Terashima,
Takasada Shibauchi,
Yuji Matsuda,
Marcin Konczykowski,
H. Pastoriza,
Cornelis Jacominus Van Der Beek
Abstract:
We present a comprehensive overview of vortex pinning in single crystals of the isovalently substituted iron-based superconductor BaFe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$, a material that qualifies as an archetypical clean superconductor, containing only sparse strong point-like pins [in the sense of C.J. van der Beek {\em et al.}, Phys. Rev. B {\bf 66}, 024523 (2002)]. Widely varying critical current…
▽ More
We present a comprehensive overview of vortex pinning in single crystals of the isovalently substituted iron-based superconductor BaFe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$, a material that qualifies as an archetypical clean superconductor, containing only sparse strong point-like pins [in the sense of C.J. van der Beek {\em et al.}, Phys. Rev. B {\bf 66}, 024523 (2002)]. Widely varying critical current values for nominally similar compositions show that flux pinning is of extrinsic origin. Vortex configurations, imaged using the Bitter decoration method, show less density fluctuations than those previously observed in charge-doped Ba(Fe$_{1-x}$Co$_{x}$)$_{2}$As$_{2}$ single crystals. Analysis reveals that the pinning force and -energy distributions depend on the P-content $x$. However, they are always much narrower than in Ba(Fe$_{1-x}$Co$_{x}$)$_{2}$As$_{2}$, a result that is attributed to the weaker temperature dependence of the superfluid density on approaching $T_{c}$ in BaFe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$. Critical current density measurements and pinning force distributions independently yield a mean distance between effective pinning centers $\bar{\mathcal L} \sim 90$ nm, increasing with increasing P-content $x$. This evolution can be understood as being the consequence of the P-dependence of the London penetration depth. Further salient features are a wide vortex free "Meissner belt", observed at the edge of overdoped crystals, and characteristic chain-like vortex arrangements, observed at all levels of P-substitution.
△ Less
Submitted 14 March, 2013;
originally announced March 2013.
-
Persistence of the first-order transition lines in mesoscopic Bi$_2$Sr$_2$CaCu$_2$O$_8$ vortex matter with less than hundred vortices
Authors:
M. Konczykowski,
Y. Fasano,
M. I. Dolz,
H. Pastoriza,
V. Mosser,
M. Li
Abstract:
The persistence of the first-order transition line in the phase diagram of mesoscopic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter is detected down to a system size of less than hundred vortices. Precise and highly-sensitive to bulk currents AC magnetization techniques proved to be mandatory in order to obtain this information. The location of the vortex matter first-order transition lines are…
▽ More
The persistence of the first-order transition line in the phase diagram of mesoscopic Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8}$ vortex matter is detected down to a system size of less than hundred vortices. Precise and highly-sensitive to bulk currents AC magnetization techniques proved to be mandatory in order to obtain this information. The location of the vortex matter first-order transition lines are not altered by decreasing the sample size down to 20 $μ$m. Nevertheless, the onset of irreversible magnetization is affected by increasing the sample surface-to-volume ratio producing a noticeable enlargement of the irreversible vortex region above the second-peak transition.
△ Less
Submitted 18 December, 2012;
originally announced December 2012.
-
Anisotropic response of the moving vortex lattice in superconducting Mo$_{(1-x)}$Ge$_{x}$ amorphous films
Authors:
M. I. Dolz,
D. E. Shalóm,
H. Pastoriza,
D. O. López
Abstract:
We have performed magnetic susceptibility measurements in Mo$_{(1-x)}$Ge$_x$ amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current - temperature phase diagram where the dynamical vortex structures behave…
▽ More
We have performed magnetic susceptibility measurements in Mo$_{(1-x)}$Ge$_x$ amorphous thin films biased with an electrical current using anisotropic coils. We tested the symmetry of the vortex response changing the relative orientation between the bias current and the susceptibility coils. We found a region in the DC current - temperature phase diagram where the dynamical vortex structures behave anisotropically. In this region the shielding capability of the superconducting currents measured by the susceptibility coils is less effective along the direction of vortex motion compared to the transverse direction. This anisotropic response is found in the same region where the peak effect in the critical current is developed. On rising temperature the isotropic behavior is recovered.
△ Less
Submitted 29 December, 2011;
originally announced December 2011.
-
Vortex pinning : a probe for nanoscale disorder in iron-based superconductors
Authors:
Cornelis Jacominus Van Der Beek,
Sultan Demirdis,
Marcin Konczykowski,
Yanina Fasano,
Nestor René Cejas-Bolecek,
H. Pastoriza,
Dorothée Colson,
F. Rullier-Albenque
Abstract:
The pinning of quantized flux lines, or vortices, in the mixed state is used to quantify the effect of impurities in iron-based superconductors (IBS). Disorder at two length scales is relevant in these materials. Strong flux pinning resulting from nm-scale heterogeneity of the superconducting properties leads to the very disordered vortex ensembles observed in the IBS, and to the pronounced maximu…
▽ More
The pinning of quantized flux lines, or vortices, in the mixed state is used to quantify the effect of impurities in iron-based superconductors (IBS). Disorder at two length scales is relevant in these materials. Strong flux pinning resulting from nm-scale heterogeneity of the superconducting properties leads to the very disordered vortex ensembles observed in the IBS, and to the pronounced maximum in the critical current density jc at low magnetic fields. Disorder at the atomic scale, most likely induced by the dopant atoms, leads to "weak collective pinning" and a magnetic field-independent contribution jcoll. The latter allows one to estimate quasi-particle scattering rates.
△ Less
Submitted 26 September, 2011;
originally announced September 2011.
-
Strong pinning and vortex energy distributions in single crystalline Ba(Fe1-xCox)2As2
Authors:
S. Demirdis,
C. J. van der Beek,
Y. Fasano,
N. R. Cejas Bolecek,
H. Pastoriza,
D. Colson,
F. Rullier-Albenque
Abstract:
The interrelation between heterogeneity and flux pinning is studied in Ba(Fe1-xCox)2As2 single crystals with widely varying Co-content x. Magnetic Bitter decoration of the superconducting vortex ensemble in crystals with x = 0:075 and x = 0:1 reveal highly disordered vortex structures. The width of the Meissner belt observed at the edges of the crystals, and above the surface steps formed by cleav…
▽ More
The interrelation between heterogeneity and flux pinning is studied in Ba(Fe1-xCox)2As2 single crystals with widely varying Co-content x. Magnetic Bitter decoration of the superconducting vortex ensemble in crystals with x = 0:075 and x = 0:1 reveal highly disordered vortex structures. The width of the Meissner belt observed at the edges of the crystals, and above the surface steps formed by cleaving, as well as the width of the intervortex distance distribution, indicate that the observed vortex ensemble is established at a temperature just below the critical temperature Tc. The vortex interaction energy and pinning force distributions extracted from the images strongly suggest that the vortex lattice disorder is attributable to strong pinning due to spatial fluctuations of Tc and of the superfluid density. Correlating the results with the critical current density yields a typical length scale of the relevant disorder of 40 - 60 nm.
△ Less
Submitted 29 June, 2011;
originally announced June 2011.
-
Direct determination of the collective pinning radius in high temperature superconductors
Authors:
Moira I. Dolz,
Alejandro B. Kolton,
Hernan Pastoriza
Abstract:
We study finite-size effects at the onset of the irreversible magnetic behaviour of micron-sized Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ single crystals by using silicon micro-oscillators. We find an irreversibility line appearing well below the thermodynamic Bragg-glass melting line at a magnetic field which increases both with increasing the sample radius and with decreasing the temperature. We show tha…
▽ More
We study finite-size effects at the onset of the irreversible magnetic behaviour of micron-sized Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ single crystals by using silicon micro-oscillators. We find an irreversibility line appearing well below the thermodynamic Bragg-glass melting line at a magnetic field which increases both with increasing the sample radius and with decreasing the temperature. We show that this size-dependent irreversibility line can be identified with the crossover between the Larkin and the random manifold regimes of the vortex lattice transverse roughness. Our method allows to determine the three-dimensional weak collective pinning Larkin radius in a {\it direct way}.
△ Less
Submitted 12 May, 2009;
originally announced May 2009.
-
Dependence of vortex phase transitions in mesoscopic BSCCO superconductor at tilted magnetic fields
Authors:
M. I. Dolz,
H. Pastoriza
Abstract:
A micron sized single crystal of the superconductor BSCCO was studied using silicon mechanical micro-oscillators at various tilt angles of the dc magnetic field with respect to the c axis of the sample. Different phases of the vortex matter were detected by measuring changes in the value and sign of the oscillator resonant frequency variation with temperature. We could explain the change in the…
▽ More
A micron sized single crystal of the superconductor BSCCO was studied using silicon mechanical micro-oscillators at various tilt angles of the dc magnetic field with respect to the c axis of the sample. Different phases of the vortex matter were detected by measuring changes in the value and sign of the oscillator resonant frequency variation with temperature. We could explain the change in the sign of this variation at high temperatures as the transition from the 2D liquid of decoupled pancakes to a reversible 3D vortex lattice. The data indicates that this transition only depends on the magnetic field perpendicular to the superconducting layers while the dissipation involved in this process depends on the component parallel to them.
△ Less
Submitted 18 June, 2008;
originally announced June 2008.
-
Magnetic Behavior of Single La$_{0.67}$Ca$_{0.33}$MnO$_3$ Nanotubes: Surface and Shape Effects
Authors:
M. Dolz,
W. Bast,
D. Antonio,
H. Pastoriza,
J. Curiale,
R. D. Sanchez,
A. G. Leyva
Abstract:
We report magnetization experiments in two magnetically isolated ferromagnetic nanotubes of perovskite La$_{0.67}$Ca$_{0.33}$MnO$_3$. The results show that the magnetic anisotropy is determined by the sample shape although the coercive field is reduced by incoherent magnetization reversal modes. The temperature dependence of the magnetization reveals that the magnetic behavior is dominated by gr…
▽ More
We report magnetization experiments in two magnetically isolated ferromagnetic nanotubes of perovskite La$_{0.67}$Ca$_{0.33}$MnO$_3$. The results show that the magnetic anisotropy is determined by the sample shape although the coercive field is reduced by incoherent magnetization reversal modes. The temperature dependence of the magnetization reveals that the magnetic behavior is dominated by grain surface properties. These measurements were acquired using a Silicon micro-mechanical oscillator working in its resonant mode. The sensitivity was enough to measure the magnetic properties of these two samples with a mass lower than 14 picograms and to obtain for the first time the magnetization loop for one isolated nanotube.
△ Less
Submitted 14 March, 2008; v1 submitted 11 September, 2007;
originally announced September 2007.
-
Dissipation in Mesoscopic Superconductors with Ac Magnetic Fields
Authors:
A. D. Hernández,
O. Arés,
C. Hart,
D. Domínguez,
H. Pastoriza,
A. Butera
Abstract:
The response of mesoscopic superconductors to an ac magnetic field is investigated both experimentally and with numerical simulations. We study small square samples with dimensions of the order of the penetration depth. We obtain the ac susceptibitity $χ=χ'+iχ''$ at microwave frequencies as a function of the dc magnetic field $H_{dc}$. We find that the dissipation, given by $χ''$, has a non mono…
▽ More
The response of mesoscopic superconductors to an ac magnetic field is investigated both experimentally and with numerical simulations. We study small square samples with dimensions of the order of the penetration depth. We obtain the ac susceptibitity $χ=χ'+iχ''$ at microwave frequencies as a function of the dc magnetic field $H_{dc}$. We find that the dissipation, given by $χ''$, has a non monotonous behavior in mesoscopic samples. In the numerical simulations we obtain that the dissipation increases before the penetration of vortices and then it decreases abruptly after vortices have entered the sample. This is verified experimentally, where we find that $χ''$ has strong oscillations as a function of $H_{dc}$ in small squares of Pb.
△ Less
Submitted 28 May, 2007;
originally announced May 2007.
-
Measurement of mesoscopic High-$T_c$ superconductors using Si mechanical micro-oscillators
Authors:
M. Dolz,
D. Antonio,
H. Pastoriza
Abstract:
In a superconducting mesoscopic sample, with dimensions comparable to the London penetration depth, some properties are qualitatively different to those found in the bulk material. These properties include magnetization, vortex dynamics and ordering of the vortex lattice. In order to detect the small signals produced by this kind of samples, new instruments designed for the microscale are needed…
▽ More
In a superconducting mesoscopic sample, with dimensions comparable to the London penetration depth, some properties are qualitatively different to those found in the bulk material. These properties include magnetization, vortex dynamics and ordering of the vortex lattice. In order to detect the small signals produced by this kind of samples, new instruments designed for the microscale are needed. In this work we use micromechanical oscillators to study the magnetic properties of a Bi$_2$Sr$_2$CaCu$_2$O$_{8 + δ}$ disk with a diameter of 13.5 microns and a thickness of 2.5 microns. The discussion of our results is based on the existence and contribution of inter and intra layer currents.
△ Less
Submitted 26 February, 2007;
originally announced February 2007.
-
Vortex motion rectification in Josephson junction arrays with a ratchet potential
Authors:
D. E. Shalom,
H. Pastoriza
Abstract:
By means of electrical transport measurements we have studied the rectified motion of vortices in ratchet potentials engineered on over-damped Josephson junction arrays. The rectified voltage as a function of the vortex density shows a maximum efficiency close a matching condition to the period of the ratchet potential indicating a collective vortex motion. Vortex current reversals where detecte…
▽ More
By means of electrical transport measurements we have studied the rectified motion of vortices in ratchet potentials engineered on over-damped Josephson junction arrays. The rectified voltage as a function of the vortex density shows a maximum efficiency close a matching condition to the period of the ratchet potential indicating a collective vortex motion. Vortex current reversals where detected varying the driving force and vortex density revealing the influence of vortex-vortex interaction in the ratchet effect.
△ Less
Submitted 19 November, 2004;
originally announced November 2004.
-
Imaging the structure of the domain wall between symmetries interconnected by a discontinuous transition
Authors:
Yanina Fasano,
M. De Seta,
M. Menghini,
H. Pastoriza,
F. de la Cruz
Abstract:
We have been able to observe with single particle resolution the interface between two structural symmetries that cannot be interconnected by a continuous transition. By means of an engineered 2D potential that pins the extremity of vortex strings an square symmetry was imposed at the surface of a 3D vortex solid. Using the Bitter decoration technique and on account of the continuous vortex symm…
▽ More
We have been able to observe with single particle resolution the interface between two structural symmetries that cannot be interconnected by a continuous transition. By means of an engineered 2D potential that pins the extremity of vortex strings an square symmetry was imposed at the surface of a 3D vortex solid. Using the Bitter decoration technique and on account of the continuous vortex symmetry we visualize how the induced structure transforms along the vortex direction before changing into the expected hexagonal structure at a finite distance from the surface.
△ Less
Submitted 27 August, 2002;
originally announced August 2002.
-
Observation of Ising-like critical fluctuations in frustrated Josephson junction arrays with modulated coupling energies
Authors:
J. Affolter,
M. Tesei,
H. Pastoriza,
Ch. Leemann,
P. Martinoli
Abstract:
We report the results of ac sheet conductance measurements performed on fully frustrated square arrays of Josephson junctions whose coupling energy is periodically modulated in one of the principal lattice directions. Such systems are predicted to exhibit two distinct transitions: a low-temperature Ising-like transition triggered by the proliferation of domain walls and a high-temperature transi…
▽ More
We report the results of ac sheet conductance measurements performed on fully frustrated square arrays of Josephson junctions whose coupling energy is periodically modulated in one of the principal lattice directions. Such systems are predicted to exhibit two distinct transitions: a low-temperature Ising-like transition triggered by the proliferation of domain walls and a high-temperature transition driven by the vortex unbinding mechanism of the Beresinskii-Kosterlitz-Thouless (BKT) theory. Both the superfluid and dissipative components of the conductance are found to exhibit features which unambiguously demonstrate the existence of a double transition whose properties are consistent with the Ising-BKT scenario.
△ Less
Submitted 12 November, 2001;
originally announced November 2001.
-
Orientational pinning and transverse voltage: Simulations and experiments in square Josephson junction arrays
Authors:
V. I. Marconi,
S. Candia,
P. Balenzuela,
H. Pastoriza,
D. Dominguez,
P. Martinoli
Abstract:
We study the dependence of the transport properties of square Josephson Junctions arrays with the direction of the applied dc current, both experimentally and numerically. We present computational simulations of current-voltage curves at finite temperatures for a single vortex in the array ($Ha^2/Φ_0=f=1/L^2$), and experimental measurements in $100\times1000$ arrays under a low magnetic field co…
▽ More
We study the dependence of the transport properties of square Josephson Junctions arrays with the direction of the applied dc current, both experimentally and numerically. We present computational simulations of current-voltage curves at finite temperatures for a single vortex in the array ($Ha^2/Φ_0=f=1/L^2$), and experimental measurements in $100\times1000$ arrays under a low magnetic field corresponding to $f\approx0.02$. We find that the transverse voltage vanishes only in the directions of maximum symmetry of the square lattice: the [10] and [01] direction (parallel bias) and the [11] direction (diagonal bias). For orientations different than the symmetry directions, we find a finite transverse voltage which depends strongly on the angle $φ$ of the current. We find that vortex motion is pinned in the [10] direction ($φ=0$), meaning that the voltage response is insensitive to small changes in the orientation of the current near $φ=0$. We call this phenomenon orientational pinning. This leads to a finite transverse critical current for a bias at $φ=0$ and to a transverse voltage for a bias at $φ\not=0$. On the other hand, for diagonal bias in the [11] direction the behavior is highly unstable against small variations of $φ$, leading to a rapid change from zero transverse voltage to a large transverse voltage within a few degrees. This last behavior is in good agreement with our measurements in arrays with a quasi-diagonal current drive.
△ Less
Submitted 26 January, 2000;
originally announced January 2000.
-
Role of twin boundaries on the vortex dynamics in YBa$_2$Cu$_3$O$_7$
Authors:
H. Pastoriza,
S. Candia,
G. Nieva
Abstract:
By means of a novel technique of rotating the applied current we have directly measured the influence of twin boundaries on the vortex motion in a YBa$_2$Cu$_3$O$_7$ single crystal. The results indicate that the effect of twin planes on the vortex dynamics starts to develop below a certain temperature, being responsible for an anisotropic viscosity in the vortex liquid state and a guided motion…
▽ More
By means of a novel technique of rotating the applied current we have directly measured the influence of twin boundaries on the vortex motion in a YBa$_2$Cu$_3$O$_7$ single crystal. The results indicate that the effect of twin planes on the vortex dynamics starts to develop below a certain temperature, being responsible for an anisotropic viscosity in the vortex liquid state and a guided motion in the solid state.
△ Less
Submitted 19 July, 1999;
originally announced July 1999.