-
Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom
Authors:
Jacopo Bernardini,
Mattia Parise,
Donato Passarelli
Abstract:
Beamline components, such as superconducting radio frequency cavities and focusing lenses, need to be assembled together in a string while in a cleanroom environment. The present contribution identifies and characterizes materials for additive manufacturing that can be used in a cleanroom. The well known advantages of additive manufacturing processes would highly benefit the design and development…
▽ More
Beamline components, such as superconducting radio frequency cavities and focusing lenses, need to be assembled together in a string while in a cleanroom environment. The present contribution identifies and characterizes materials for additive manufacturing that can be used in a cleanroom. The well known advantages of additive manufacturing processes would highly benefit the design and development of tooling needed for the mechanical support and alignment of string components. Cleanliness, mechanical properties, and leak tightness of the chosen materials are the main focus of this contribution, which also paves the way for the integration of such materials in cryomodule assemblies. Results reported here were obtained in the framework of the PIP-II project at Fermilab.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Impact of Solenoid Induced Residual Magnetic Fields on The Prototype SSR1 CM Performance
Authors:
D. Passarelli,
J. Bernardini,
C. Boffo,
S. Chandrasekaran,
A. Hogberg,
T. Khabiboulline,
J. Ozelis,
M. Parise,
V. Roger,
G. Romanov,
A. Sukhanov,
G. Wu,
V. Yakovlev,
Y. Xie
Abstract:
A prototype cryomodule containing eight Single Spoke Resonators type-1 (SSR1) operating at 325 MHz and four superconducting focusing lenses was successfully assembled, cold tested, and accelerated beam in the framework of the PIP-II project at Fermilab. The impact of induced residual magnetic fields from the solenoids on performance of cavities is presented in this contribution. In addition, desig…
▽ More
A prototype cryomodule containing eight Single Spoke Resonators type-1 (SSR1) operating at 325 MHz and four superconducting focusing lenses was successfully assembled, cold tested, and accelerated beam in the framework of the PIP-II project at Fermilab. The impact of induced residual magnetic fields from the solenoids on performance of cavities is presented in this contribution. In addition, design optimizations for the production cryomodules as a result of this impact are highlighted.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab
Authors:
J. Bernardini,
V. Roger,
D. Passarelli,
M. Parise,
G. Romanov,
J. Helsper,
M. Chen,
M. Kramp,
F. Lewis,
B. Squires,
T. Nicol,
P. Neri
Abstract:
This contribution reports the design of the production Single Spoke Resonator Type 1 Cryomodule (SSR1 CM) for the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. The Fermilab style cryomodule developed f…
▽ More
This contribution reports the design of the production Single Spoke Resonator Type 1 Cryomodule (SSR1 CM) for the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. The Fermilab style cryomodule developed for the prototype Single Spoke Resonator Type 1 (pSSR1), the prototype High Beta 650 MHz (pHB650), and preproduction Single Spoke Resonator Type 2 (ppSSR2) cryomodules is the baseline of the present design. The focus of this contribution is on the results of calculations and finite element analyses performed to optimize the critical components of the cryomodule: vacuum vessel, strongback, thermal shield, and magnetic shield.
△ Less
Submitted 15 November, 2023; v1 submitted 9 November, 2023;
originally announced November 2023.
-
PIII Project Overview and Status
Authors:
R. Stanek,
C. Boffo,
S. Chandrasekaran,
S. Dixon,
E. Harms,
L. Kokoska,
I. Kourbanis,
J. Leibfritz,
O. Napoly,
D. Passarelli,
E. Pozdeyev,
A. Rowe
Abstract:
The Proton Improvement Plan II (PIP-II) project is an essential upgrade to Fermilab's particle accelerator complex to enable the world's most intense neutrino beam for LBNF/DUNE and a broad particle physics program for many decades to come. PIP-II will deliver 1.2 MW of proton beam power from the Main Injector, upgradeable to multi-MW capability. The central element of PIP-II is an 800 MeV superco…
▽ More
The Proton Improvement Plan II (PIP-II) project is an essential upgrade to Fermilab's particle accelerator complex to enable the world's most intense neutrino beam for LBNF/DUNE and a broad particle physics program for many decades to come. PIP-II will deliver 1.2 MW of proton beam power from the Main Injector, upgradeable to multi-MW capability. The central element of PIP-II is an 800 MeV superconducting radio frequency (SRF) linac, which comprises a room temperature front end followed by an SRF section. The SRF section consists of five different flavors of cavities/cryomodules, including Half Wave Resonators (HWR), Single Spoke and elliptical resonators operating at, or above, state-of-the-art parameters. The first two PIP-II cryomodules, Half Wave Resonator (HWR) and Single Spoke Resonator 1 (SSR1) were installed in the PIP-II Injector Test facility (PIP2IT) and have accelerated beam to above 17 MeV. PIP-II is the first U.S. accelerator project that will be constructed with significant contributions from international partners, including India, Italy, France, United Kingdom and Poland. The project was baselined in April 2022, and the construction phase is underway.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
PIP-II SSR2 Cavities Fabrication and Processing Experience
Authors:
M. Parise,
D. Passarelli,
P. Berrutti,
D. Longuevergne,
P. Duchesne
Abstract:
The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several units are already manufactured and prepared for cold testing. In this work, data collected from the fabrication, processing and preparation of the cavities will be presented and the improvements implemented after the comp…
▽ More
The Proton Improvement Plan-II (PIP-II [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A preproduction SSR2 cryomodule will contain 5 jacketed cavities. Several units are already manufactured and prepared for cold testing. In this work, data collected from the fabrication, processing and preparation of the cavities will be presented and the improvements implemented after the completion of the first unit will be highlighted.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Design, Manufacturing, Assembly, and Lessons Learned of the Pre-production 325 MHz Couplers for the PIP-II Project at Fermilab
Authors:
J. Helsper,
S. Wallon,
D. Passarelli,
D. Longuevergne,
S. Kazakov,
N. Solyak
Abstract:
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design,…
▽ More
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design, manufacturing, and assembly, along with the lessons learned at each stage.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab
Authors:
PIP-II Collaboration,
:,
M. Parise,
D. Passarelli,
J. Bernardini
Abstract:
The beam volume of the Pre-Production Single Spoke Resonator type 2 (ppSSR2) cryomodule [1] for the Proton Improvement Plan-II (PIP-II) [2] project will be protected against over-pressurization using a burst disk. This contribution focuses on the analysis of the relief of such trapped volume during a catastrophic scenario with multiple systems failures. An analytical model, able to predict the pre…
▽ More
The beam volume of the Pre-Production Single Spoke Resonator type 2 (ppSSR2) cryomodule [1] for the Proton Improvement Plan-II (PIP-II) [2] project will be protected against over-pressurization using a burst disk. This contribution focuses on the analysis of the relief of such trapped volume during a catastrophic scenario with multiple systems failures. An analytical model, able to predict the pressure in the beam volume depending of the various boundary conditions, has been developed and will be presented along with the results.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Niobium to Titanium Electron Beam Welding for SRF Cavities
Authors:
M. Parise,
D. Passarelli,
J. Bernardini
Abstract:
Titanium and niobium are the main materials used for the fabrication of Superconducting Radio Frequency (SRF) cavities. These two metals are usually joined , using various welding techniques, using a third material in between. This contribution focuses on the development of an innovative electron beam welding technique capable of producing a strong bond between these two different materials. Sever…
▽ More
Titanium and niobium are the main materials used for the fabrication of Superconducting Radio Frequency (SRF) cavities. These two metals are usually joined , using various welding techniques, using a third material in between. This contribution focuses on the development of an innovative electron beam welding technique capable of producing a strong bond between these two different materials. Several samples are produced and tested to assess the mechanical strength at room and cryogenic temperature as well as the composition of the resulting welded joint. Also, the first units of the Single Spoke Resonator type 2 (SSR2) cavities for the Proton Improvement Plan-II (PIP-II [1]) have been fabricated joining directly various grades of titanium to niobium and results gathered through the fabrication will be reported.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Fabrication experience of the pre-production PIP-II SSR2 cavities at Fermilab
Authors:
M. Parise,
D. Passarelli,
P. Berrutti,
V. Roger,
D. Longuevergne,
P. Duchesne
Abstract:
The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured and five installed in the first pre-production cryomodule. The mechanical design of the jacketed cavity has been finalized and it will be presented in this paper along with fabrication and processing experience. The import…
▽ More
The Proton Improvement Plan-II (PIP-II, [1]) linac will include 35 Single Spoke Resonators type 2 (SSR2). A total of eight pre-production SSR2 jacketed cavities will be procured and five installed in the first pre-production cryomodule. The mechanical design of the jacketed cavity has been finalized and it will be presented in this paper along with fabrication and processing experience. The importance of interfaces, quality controls and procurement aspects in the design phase will be remarked as well as lessons learned during the fabrication process. Furthermore, development studies will be presented together with other design validation tests.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
Final Design Of The Pre-production SSR2 Cryomodule For PIP-II Project At Fermilab
Authors:
J. Bernardini,
D. Passarelli,
V. Roger,
M. Parise,
J. Helsper,
G. V. Romanov,
M. Chen,
C. Boffo,
M. Kramp,
F. L. Lewis,
T. Nicol,
B. Squires,
M. Turenne
Abstract:
The present contribution reports the design of the pre-production Single Spoke Resonator Type 2 Cryomodule (ppSSR2 CM), developed in the framework of the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. T…
▽ More
The present contribution reports the design of the pre-production Single Spoke Resonator Type 2 Cryomodule (ppSSR2 CM), developed in the framework of the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. The Fermilab style cryomodule developed for the prototype Single Spoke Resonator Type 1 (pSSR1) and the prototype High Beta 650 MHz (pHB650) cryomodules is the baseline of the current design, which paves the way for production SSR1 and SSR2 cryomodules for the PIP-II linac. The focus of this contribution is on the results of calculations and finite element analysis performed to optimize the critical components of the cryomodule: vacuum vessel, strongback, thermal shield, and magnetic shield.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Application Of The ASME Boiler And Pressure Vessel Code In The Design Of SSR Cryomodule Beamlines For PIP-II Project At Fermilab
Authors:
J. Bernardini,
M. Parise,
M. Chen,
D. Passarelli
Abstract:
This contribution reports the design of the main components used to interconnect SRF cavities and superconducting focusing lenses in the SSR Cryomodule beamlines, developed in the framework of the PIP-II project at Fermilab. The focus of the present contribution is on the design and testing of the edge-welded bellows according to ASME Boiler and Pressure Vessel Code. The activities performed to qu…
▽ More
This contribution reports the design of the main components used to interconnect SRF cavities and superconducting focusing lenses in the SSR Cryomodule beamlines, developed in the framework of the PIP-II project at Fermilab. The focus of the present contribution is on the design and testing of the edge-welded bellows according to ASME Boiler and Pressure Vessel Code. The activities performed to qualify the bellows to be assembled in cleanroom, for operation in high vacuum, cryogenic environments, and their characterization from magnetic standpoint, will also be presented.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Tuning of Multicell Superconducting Accelerating Cavities using Pressurized Balloons
Authors:
Mohamed H. Awida,
Donato Passarelli,
Marco Castellari,
Alessandro Tesi,
Timergali Khabiboulline
Abstract:
Plastic tuning of multicell superconducting accelerating cavities is crucial in the development cycle of cavities for particle accelerators. Cavities must meet stringent requirements regarding the operating mode frequency, field flatness, and eccentricity before lining them up in a cryomodule string. After dressing bare cavities with helium vessels, the welded vessel prevents access to individual…
▽ More
Plastic tuning of multicell superconducting accelerating cavities is crucial in the development cycle of cavities for particle accelerators. Cavities must meet stringent requirements regarding the operating mode frequency, field flatness, and eccentricity before lining them up in a cryomodule string. After dressing bare cavities with helium vessels, the welded vessel prevents access to individual cavity cells disallowing any further localized tuning. Currently, there is no straightforward way to tune dressed cavities other than cutting the vessel and then tuning the bare cavity and dressing it back, which would significantly impact cost and schedule. In this paper, we present a novel tuning technique for already jacketed cavities that is non-invasive and cost-effective. The proposed scheme employs pressurized balloons to be temporarily deployed inside the cavity as a means to localize mechanical deformation in specific cells. The proposed tuning technique was successfully utilized to recover a 9-cell 1.3 GHz tesla-style cavity.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Deep learning approaches to Earth Observation change detection
Authors:
Antonio Di Pilato,
Nicolò Taggio,
Alexis Pompili,
Michele Iacobellis,
Adriano Di Florio,
Davide Passarelli,
Sergio Samarelli
Abstract:
The interest for change detection in the field of remote sensing has increased in the last few years. Searching for changes in satellite images has many useful applications, ranging from land cover and land use analysis to anomaly detection. In particular, urban change detection provides an efficient tool to study urban spread and growth through several years of observation. At the same time, chan…
▽ More
The interest for change detection in the field of remote sensing has increased in the last few years. Searching for changes in satellite images has many useful applications, ranging from land cover and land use analysis to anomaly detection. In particular, urban change detection provides an efficient tool to study urban spread and growth through several years of observation. At the same time, change detection is often a computationally challenging and time-consuming task, which requires innovative methods to guarantee optimal results with unquestionable value and within reasonable time. In this paper we present two different approaches to change detection (semantic segmentation and classification) that both exploit convolutional neural networks to achieve good results, which can be further refined and used in a post-processing workflow for a large variety of applications.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.