Showing 1–46 of 46 results for author: Passamonti, L

Enhancing the light yield of He:CF$_4$ based gaseous detector

Authors: F. D. Amaro, R. Antonietti, E. Baracchini, L. Benussi, S. Bianco, R. Campagnola, C. Capoccia, M. Caponero, D. S. Cardoso, L. G. M. de Carvalho, G. Cavoto, I. Abritta Costa, A. Croce, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, M. D'Astolfo, G. D'Imperio, D. Fiorina, F. Iacoangeli, Z. Islam, H. P. L. Jùnior, E. Kemp, G. Maccarrone , et al. (29 additional authors not shown)

Abstract: The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipp… ▽ More The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Charge Amplification in Low Pressure CF4:SF6:He Mixtures with a Multi-Mesh ThGEM for Directional Dark Matter Searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, F. Borra, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, I. A. Costa, T. Crane, E. Dane, M. DAstolfo, G. Dho, F. Di Giambattista, G. DImperio, E. Di Marco, J. M. F. Dos Santos, A. C. Ezeribe, D. Fiorina, F. Iacoangeli, H. P. Lima Junior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano , et al. (24 additional authors not shown)

Abstract: The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Neg… ▽ More The CYGNO collaboration is develo** next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: Corresponding Author: A.G. McLean

Status of the production of GEM chambers for the CMS experiment at Large Hadron Collider

Authors: L. Benussi, S. Bianco, R. Campagnola, M. Caponero, S. Colafranceschi, S. Meola, E. Paoletti, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, R. Tesauro

Abstract: The High Luminosity LHC phase includes an upgrade to the muon stations for the CMS Experiment. CMS trigger and muon identification performance will be crucial, and it is, therefore, necessary to install new GEM stations to extend acceptance in the high-η region. An explanation of the quality control test and an update on the status of production will be provided. The High Luminosity LHC phase includes an upgrade to the muon stations for the CMS Experiment. CMS trigger and muon identification performance will be crucial, and it is, therefore, necessary to install new GEM stations to extend acceptance in the high-η region. An explanation of the quality control test and an update on the status of production will be provided. △ Less

Submitted 28 March, 2024; originally announced April 2024.

LIME -- a gas TPC prototype for directional Dark Matter search for the CYGNO experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Junior, Guilherme Sebastiao Pinheiro Lopes, Giovanni Maccarrone, Rui Daniel Passos Mano, Robert Renz Marcelo Gregorio, David José Gaspar Marques, Giovanni Mazzitelli, Alasdair Gregor McLean, Andrea Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demo… ▽ More The CYGNO experiment aims at the development of a large gaseous TPC with GEM-based amplification and an optical readout by means of PMTs and scientific CMOS cameras for 3D tracking down to O(keV) energies, for the directional detection of rare events such as low mass Dark Matter and solar neutrino interactions. The largest prototype built so far towards the realisation of the CYGNO experiment demonstrator is the 50 L active volume LIME, with 4 PMTs and a single sCMOS imaging a 33$\times$33 cm\textsuperscript{2} area for 50 cm drift, that has been installed in underground Laboratori Nazionali del Gran Sasso in February 2022. We will illustrate LIME performances as evaluated overground in Laboratori Nazionali di Frascati by means of radioactive X-ray sources, and in particular the detector stability, energy response and energy resolution. We will discuss the MC simulation developed to reproduce the detector response and show the comparison with actual data. We will furthermore examine the background simulation worked out for LIME underground data taking and illustrate the foreseen expected measurement and results in terms of natural and materials intrinsic radioactivity characterisation and measurement of the LNGS underground natural neutron flux. The results that will be obtained by underground LIME installation will be paramount in the optimisation of the CYGNO demonstrator, since this is foreseen to be composed by multiple modules with the same LIME dimensions and characteristics. △ Less

Submitted 29 June, 2023; originally announced June 2023.

The CYGNO experiment, a directional detector for direct Dark Matter searches

Authors: F. D. Amaro, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, D. S. Cardoso, G. Cavoto, A. Cortez, I. A. Costa, E. Dané, G. Dho, F. Di Giambattista, E. Di Marco, G. D'Imperio, F. Iacoangeli, H. P. L. Jùnior, G. S. P. Lopes, G. Maccarrone, R. D. P. Mano, R. R. M. Gregorio, D. J. G. Marques, G. Mazzitelli, A. G. McLean, A. Messina , et al. (22 additional authors not shown)

Abstract: The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cam… ▽ More The CYGNO project aims at the development of a high precision optical readout gaseous Tima Projection Chamber (TPC) for directional dark matter (DM) searches, to be hosted at Laboratori Nazionali del Gran Sasso (LNGS). CYGNO employs a He:CF$_4$ gas mixture at atmospheric pressure with a Gas Electron Multiplier (GEM) based amplification structure coupled to an optical readout comprised of sCMOS cameras and photomultiplier tubes (PMTs). This experimental setup allows to achieve 3D tracking and background rejection down to O(1) keV energy, to boost sensitivity to low WIMP masses. The characteristics of the optical readout approach in terms of the light yield will be illustrated along with the particle identification properties. The project timeline foresees, in the next 2-3 years, the realisation and installation of a 0.4 m$^3$ TPC in the underground laboratories at LNGS to act as a demonstrator. Finally, the studies of the expected DM sensitivities of the CYGNO demonstrator will be presented. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Multimodal and multicontrast image fusion via deep generative models

Authors: Giovanna Maria Dimitri, Simeon Spasov, Andrea Duggento, Luca Passamonti, Pietro Li`o, Nicola Toschi

Abstract: Recently, it has become progressively more evident that classic diagnostic labels are unable to reliably describe the complexity and variability of several clinical phenotypes. This is particularly true for a broad range of neuropsychiatric illnesses (e.g., depression, anxiety disorders, behavioral phenotypes). Patient heterogeneity can be better described by grou** individuals into novel catego… ▽ More Recently, it has become progressively more evident that classic diagnostic labels are unable to reliably describe the complexity and variability of several clinical phenotypes. This is particularly true for a broad range of neuropsychiatric illnesses (e.g., depression, anxiety disorders, behavioral phenotypes). Patient heterogeneity can be better described by grou** individuals into novel categories based on empirically derived sections of intersecting continua that span across and beyond traditional categorical borders. In this context, neuroimaging data carry a wealth of spatiotemporally resolved information about each patient's brain. However, they are usually heavily collapsed a priori through procedures which are not learned as part of model training, and consequently not optimized for the downstream prediction task. This is because every individual participant usually comes with multiple whole-brain 3D imaging modalities often accompanied by a deep genotypic and phenotypic characterization, hence posing formidable computational challenges. In this paper we design a deep learning architecture based on generative models rooted in a modular approach and separable convolutional blocks to a) fuse multiple 3D neuroimaging modalities on a voxel-wise level, b) convert them into informative latent embeddings through heavy dimensionality reduction, c) maintain good generalizability and minimal information loss. As proof of concept, we test our architecture on the well characterized Human Connectome Project database demonstrating that our latent embeddings can be clustered into easily separable subject strata which, in turn, map to different phenotypical information which was not included in the embedding creation process. This may be of aid in predicting disease evolution as well as drug response, hence supporting mechanistic disease understanding and empowering clinical trials. △ Less

Submitted 27 February, 2024; v1 submitted 28 March, 2023; originally announced March 2023.

Design of a Resistive Plate Chamber using additive manufacturing

Authors: L. Benussi, S. Bianco, R. Campagnola, M. Caponero, S. Colafranceschi, H. Gebremedhin, J. Hess, J. Horsley, M. Landis, S. Meola, D. Nester, L. Passamonti, L. Peachey-Stoner, R. Peachey-Stoner, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, L. Stutzman, R. Tezazu

Abstract: Driven by the recent improvement in additive manufacturing technologies, we designed a detector that can be fully printed with a standard and commercial 3D printer. The main goals of this research concern the marginal design and construction costs, the reproducibility/modularity of the products, and the reduced assembly time. During the first phase of this research, after determining the most suit… ▽ More Driven by the recent improvement in additive manufacturing technologies, we designed a detector that can be fully printed with a standard and commercial 3D printer. The main goals of this research concern the marginal design and construction costs, the reproducibility/modularity of the products, and the reduced assembly time. During the first phase of this research, after determining the most suitable material, we produced 10 examples of detectors. △ Less

Submitted 26 October, 2022; originally announced October 2022.

Comments: 2 pages, 4 figures

DynDepNet: Learning Time-Varying Dependency Structures from fMRI Data via Dynamic Graph Structure Learning

Authors: Alexander Campbell, Antonio Giuliano Zippo, Luca Passamonti, Nicola Toschi, Pietro Lio

Abstract: Graph neural networks (GNNs) have demonstrated success in learning representations of brain graphs derived from functional magnetic resonance imaging (fMRI) data. However, existing GNN methods assume brain graphs are static over time and the graph adjacency matrix is known prior to model training. These assumptions contradict evidence that brain graphs are time-varying with a connectivity structur… ▽ More Graph neural networks (GNNs) have demonstrated success in learning representations of brain graphs derived from functional magnetic resonance imaging (fMRI) data. However, existing GNN methods assume brain graphs are static over time and the graph adjacency matrix is known prior to model training. These assumptions contradict evidence that brain graphs are time-varying with a connectivity structure that depends on the choice of functional connectivity measure. Incorrectly representing fMRI data with noisy brain graphs can adversely affect GNN performance. To address this, we propose DynDepNet, a novel method for learning the optimal time-varying dependency structure of fMRI data induced by downstream prediction tasks. Experiments on real-world fMRI datasets, for the task of sex classification, demonstrate that DynDepNet achieves state-of-the-art results, outperforming the best baseline in terms of accuracy by approximately 8 and 6 percentage points, respectively. Furthermore, analysis of the learned dynamic graphs reveals prediction-related brain regions consistent with existing neuroscience literature. △ Less

Submitted 9 July, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 19 pages, 5, figures, 9 tables, ICML Workshop

Searching for an eco-friendly gas mixture for the ALICE Resistive Plate Chambers

Authors: Luca Quaglia, R. Cardarelli, B. Liberti, E. Pastori, G. Proto, G. Aielli, P. Camarri, A. Di Ciacco, L. Di Stante, R. Santonico, G. Alberghi, D. Boscherini, A. Bruni, L. Massa, A. Polini, M. Romano, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo M. Ferrini, G. Saviano, M. Abbrescia, L. Congedo , et al. (25 additional authors not shown)

Abstract: The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2… ▽ More The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2014. Even though research activities are excluded from these regulations, the phase-down will inevitably increase their price and CERN is also aiming to cut down on its emissions. For these reasons it is crucial to find a more eco-friendly gas mixture for RPCs by the time of the LHC long shutdown 3, foreseen in 2026. Since $C_{2}H_{2}F_{4}$ is the main contributor to the mixture GWP, an extensive R&D process has started to replace it with tetrafluoropropene ($C_{3}H_{2}F_{4}$), due to its chemical similarity with $C_{2}H_{2}F_{4}$ and its low GWP (around 7). Preliminary tests with cosmic rays have shown promising results in terms of detector performance. The next step is to study the long-term behavior of RPCs operated with these new gas mixtures (aging studies). Since this is a subject of interest for all (and not only) the LHC experiments, a collaboration, ECOgas@GIF++, was setup to carry out joint studies. Among others, a small ALICE-like RPC was installed at the Gamma Irradiation Facility at CERN, where they are exposed to a strong radiation field, coming from a 12.5 TBq $^{137}$Cs source, which allows one to simulate many years of operation in a relatively short time. The facility also provides a muon beam at specific times of the year, which can be used to study the detector performance (e.g. efficiency and cluster size) during and after irradiation. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: Proceedings of the LHCp 2022 conference

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, T. Beyrouthy, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (157 additional authors not shown)

Abstract: The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co… ▽ More The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 45 pages, 39 figures, submitted to Nuclear Instruments and Methods in Physics Research Section A

The CYGNO Experiment

Authors: Fernando Domingues Amaro, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Caponero, Danilo Santos Cardoso, Gianluca Cavoto, André Cortez, Igor Abritta Costa, Rita Joanna da Cruz Roque, Emiliano Dané, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giovanni Grilli di Cortona, Giulia D'Imperio, Francesco Iacoangeli, Herman Pessoa Lima Júnior, Guilherme Sebastiao Pinheiro Lopes, Amaro da Silva Lopes Júnior, Giovanni Maccarrone, Rui Daniel Passos Mano, Michela Marafini, Robert Renz Marcelo Gregorio , et al. (25 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its proper… ▽ More The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its properties. Gaseous time projection chambers (TPC) with optical readout are very promising detectors combining the detailed event information provided by the TPC technique with the high sensitivity and granularity of latest-generation scientific light sensors. The CYGNO experiment (a CYGNus module with Optical readout) aims to exploit the optical readout approach of multiple-GEM structures in large volume TPCs for the study of rare events as interactions of low-mass DM or solar neutrinos. The combined use of high-granularity sCMOS cameras and fast light sensors allows the reconstruction of the 3D direction of the tracks, offering good energy resolution and very high sensitivity in the few keV energy range, together with a very good particle identification useful for distinguishing nuclear recoils from electronic recoils. This experiment is part of the CYGNUS proto-collaboration, which aims at constructing a network of underground observatories for directional DM search. A one cubic meter demonstrator is expected to be built in 2022/23 aiming at a larger scale apparatus (30 m$^3$--100 m$^3$) at a later stage. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Journal ref: published on Instruments 2022, 6(1), 6

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

Authors: A. Samalan, M. Tytgat, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. DaCosta, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Rodozov, M. Shopova, G. Soultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal, A. Cabrera , et al. (86 additional authors not shown)

Abstract: During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solen… ▽ More During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb$^{-1}$. The expected experimental conditions in that period in terms of background rates, event pileup, and the probable aging of the current detectors present a challenge for all the existing experiments at the LHC, including the Compact Muon Solenoid (CMS) experiment. To ensure a highly performing muon system for this period, several upgrades of the Resistive Plate Chamber (RPC) system of the CMS are currently being implemented. These include the replacement of the readout system for the present system, and the installation of two new RPC stations with improved chamber and front-end electronics designs. The current overall status of this CMS RPC upgrade project is presented. △ Less

Submitted 2 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr… ▽ More After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector. △ Less

Submitted 22 September, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Modeling the triple-GEM detector response to background particles for the CMS Experiment

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, I. Azhgirey, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi , et al. (164 additional authors not shown)

Abstract: An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The… ▽ More An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Comments: 16 pages, 9 figures, 6 tables

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

Authors: M. Abbas, M. Abbrescia, H. Abdalla, A. Abdelalim, S. AbuZeid, A. Agapitos, A. Ahmad, A. Ahmed, W. Ahmed, C. Aimè, C. Aruta, I. Asghar, P. Aspell, C. Avila, J. Babbar, Y. Ban, R. Band, S. Bansal, L. Benussi, V. Bhatnagar, M. Bianco, S. Bianco, K. Black, L. Borgonovi, O. Bouhali , et al. (156 additional authors not shown)

Abstract: We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent… ▽ More We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Comments: 22 pages, 14 figures

Journal ref: 2020 JINST 15 P12019

CYGNO: a gaseous TPC with optical readout for dark matter directional search

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of… ▽ More The CYGNO project has the goal to use a gaseous TPC with optical readout to detect dark matter and solar neutrinos with low energy threshold and directionality. The CYGNO demonstrator will consist of 1 m 3 volume filled with He:CF 4 gas mixture at atmospheric pressure. Optical readout with high granularity CMOS sensors, combined with fast light detectors, will provide a detailed reconstruction of the event topology. This will allow to discriminate the nuclear recoil signal from the background, mainly represented by low energy electron recoils induced by radioactivity. Thanks to the high reconstruction efficiency, CYGNO will be sensitive to low mass dark matter, and will have the potential to overcome the neutrino floor, that ultimately limits non-directional dark matter searches. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Journal ref: Journal of Instrumentation, Volume 15, July 2020

Identification of low energy nuclear recoils in a gas TPC with optical readout

Authors: Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Cesidio Capoccia, Michele Arturo Caponero, Gianluca Cavoto, Andre Cortez, Igor Abritta Costa, Emanuele Di Marco, Giulia D'Imperio, Giorgio Dho, Fabrizio Iacoangeli, Giovanni Maccarrone, Michela Marafini, Giovanni Mazzitelli, Andrea Messina, Rafael Antunes Nobrega, Aldo Orlandi, Emiliano Paoletti, Luciano Passamonti, Fabrizio Petrucci, Davide Piccolo, Daniele Pierluigi, Davide Pinci, Francesco Renga , et al. (5 additional authors not shown)

Abstract: The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to th… ▽ More The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to the high sensitivity and granularity of last generation scientific light sensors. A TPC with an amplification at the anode obtained with Gas Electron Multipliers (GEM) was tested at the Laboratori Nazionali di Frascati. Photons and neutrons from radioactive sources were employed to induce recoiling nuclei and electrons with kinetic energy in the range [1-100] keV. A He-CF4 (60/40) gas mixture was used at atmospheric pressure and the light produced during the multiplication in the GEM channels was acquired by a high position resolution and low noise scientific CMOS camera and a photomultiplier. A multi-stage pattern recognition algorithm based on an advanced clustering technique is presented here. A number of cluster shape observables are used to identify nuclear recoils induced by neutrons originated from a AmBe source against X-ray 55Fe photo-electrons. An efficiency of 18% to detect nuclear recoils with an energy of about 6 keV is reached obtaining at the same time a 96% 55Fe photo-electrons suppression. This makes this optically readout gas TPC a very promising candidate for future investigations of ultra-rare events as directional direct Dark Matter searches. △ Less

Submitted 27 October, 2021; v1 submitted 24 July, 2020; originally announced July 2020.

Report number: LEMON-20-001

Journal ref: Meas. Sci. and Tech. 2020

A density-based clustering algorithm for the CYGNO data analysis

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high… ▽ More Time Projection Chambers (TPCs) working in combination with Gas Electron Multipliers (GEMs) produce a very sensitive detector capable of observing low energy events. This is achieved by capturing photons generated during the GEM electron multiplication process by means of a high-resolution camera. The CYGNO experiment has recently developed a TPC Triple GEM detector coupled to a low noise and high spatial resolution CMOS sensor. For the image analysis, an algorithm based on an adapted version of the well-known DBSCAN was implemented, called iDBSCAN. In this paper a description of the iDBSCAN algorithm is given, including test and validation of its parameters, and a comparison with DBSCAN itself and a widely used algorithm known as Nearest Neighbor Clustering (NNC). The results show that the adapted version of DBSCAN is capable of providing full signal detection efficiency and very good energy resolution while improving the detector background rejection. △ Less

Submitted 28 September, 2020; v1 submitted 3 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.12, T12003

Stability and detection performance of a GEM-based Optical Readout TPC with He/CF$_4$ gas mixtures

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. Nobrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (4 additional authors not shown)

Abstract: The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost… ▽ More The performance and long term stability of an optically readout Time Projection Chamber with an electron amplification structure based on three Gas Electron Multipliers was studied. He/CF$_4$ based gas mixtures were used in two different proportions (60/40 and 70/30) in a CYGNO prototype with 7 litres sensitive volume. With electrical configurations providing very similar electron gains, an almost full detection efficiency in the whole detector volume was found with both mixtures, while a light yield about 20\% larger for the 60/40 was found. The electrostatic stability was tested by monitoring voltages and currents during 25 days. The detector worked in very stable and safe condition for the whole period. In the presence of less CF$_4$, a larger probability of unstable events was clearly detected. △ Less

Submitted 17 August, 2020; v1 submitted 1 July, 2020; originally announced July 2020.

Journal ref: JINST 15 (2020) no.10, P10001

CMS RPC Background -- Studies and Measurements

Authors: R. Hadjiiska, A. Samalan, M. Tytgat, N. Zaganidis, G. A. Alves, F. Marujo, F. Torres Da Silva De Araujo, E. M. Da Costa, D. De Jesus Damiao, H. Nogima, A. Santoro, S. Fonseca De Souza, A. Aleksandrov, P. Iaydjiev, M. Rodozov, M. Shopova, G. Sultanov, M. Bonchev, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, S. J. Qian, C. Bernal , et al. (84 additional authors not shown)

Abstract: The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd… ▽ More The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well. △ Less

Submitted 13 December, 2020; v1 submitted 26 May, 2020; originally announced May 2020.

Comments: 6 pages, Conference proceeding for the 2020 Resistive Plate Chambers and Related Detectors. Minor revision of the report, the results remain unchanged. Three new plots are added and some details were explained better

Performance of an optically read out time projection chamber with ultra-relativistic electrons

Authors: V. C. Antochi, E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, R. A. N'obrega, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci , et al. (6 additional authors not shown)

Abstract: The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study… ▽ More The Time Projection Chamber (TPC) is an ideal candidate to finely study the charged particle ionization in a gaseous medium. Large volumes TPCs can be read out with a suitable number of channels offering a complete 3D reconstruction of an ultra-relativistic charged particle track, that is the sequence of its energy releases in the TPC gas volume. Moreover, He-based TPCs are very promising to study keV energy particles as nuclear recoils, opening the possibility for directional searches of Dark Matter (DM) and the study of Solar Neutrinos (SN). In this paper, we report the analysis of the data acquired with a small TPC prototype (named LEMOn) built by the CYGNO collaboration that was exposed to a beam of 450 MeV electrons at the Beam Test Facility of National Laboratories of Frascati. LEMOn is operated with a He-CF4 mixture at atmospheric pressure and is based on a Gas Electron Multipliers amplification stage that produces visible light collected by a sub-millimeter position resolution scientific CMOS camera. This type of readout - in conjunction with a fast light detection - allows a 3D reconstruction of the electrons' tracks. The electrons are leaving a trail of segments of ionizations corresponding to a few keV energy releases each. Their study leads to predict a keV energy threshold and 1-10 mm longitudinal and 0.1-0.3 mm transverse position resolution for nuclear recoils, very promising for the application of optically readout TPC to DM searches and SN measurements. △ Less

Submitted 10 March, 2021; v1 submitted 25 May, 2020; originally announced May 2020.

Report number: INFN-20-06/LNF

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2021

First evidence of luminescence in a He/CF$_4$ gas mixture induced by non-ionizing electrons

Authors: E. Baracchini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, A. Cortez, I. A. Costa, E. Di Marco, G. D'Imperio, G. Dho, F. Iacoangeli, G. Maccarrone, M. Marafini, G. Mazzitelli, A. Messina, A. Orlandi, E. Paoletti, L. Passamonti, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga, F. Rosatelli , et al. (3 additional authors not shown)

Abstract: Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche proc… ▽ More Optical readout of Gas Electron Multipliers (GEM) provides very interesting performances and has been proposed for different applications in particle physics. In particular, thanks to its good efficiency in the keV energy range, it is being developed for low-energy and rare event studies, such as Dark Matter search. So far, the optical approach exploits the light produced during the avalanche processes in GEM channels. Further luminescence in the gas can be induced by electrons accelerated by a suitable electric field. The CYGNO collaboration studied this process with a combined use of a triple-GEM structure and a grid in an He/CF$_4$ (60/40) gas mixture at atmospheric pressure. Results reported in this paper allow to conclude that with an electric field of about 11~kV/cm a photon production mean free path of about 1.0~cm was found. △ Less

Submitted 2 July, 2020; v1 submitted 22 April, 2020; originally announced April 2020.

Journal ref: JINST 15, no.08, P08018 (2020)

Towards a predictive spatio-temporal representation of brain data

Authors: Tiago Azevedo, Luca Passamonti, Pietro Liò, Nicola Toschi

Abstract: The characterisation of the brain as a "connectome", in which the connections are represented by correlational values across timeseries and as summary measures derived from graph theory analyses, has been very popular in the last years. However, although this representation has advanced our understanding of the brain function, it may represent an oversimplified model. This is because the typical f… ▽ More The characterisation of the brain as a "connectome", in which the connections are represented by correlational values across timeseries and as summary measures derived from graph theory analyses, has been very popular in the last years. However, although this representation has advanced our understanding of the brain function, it may represent an oversimplified model. This is because the typical fMRI datasets are constituted by complex and highly heterogeneous timeseries that vary across space (i.e., location of brain regions). We compare various modelling techniques from deep learning and geometric deep learning to pave the way for future research in effectively leveraging the rich spatial and temporal domains of typical fMRI datasets, as well as of other similar datasets. As a proof-of-concept, we compare our approaches in the homogeneous and publicly available Human Connectome Project (HCP) dataset on a supervised binary classification task. We hope that our methodological advances relative to previous "connectomic" measures can ultimately be clinically and computationally relevant by leading to a more nuanced understanding of the brain dynamics in health and disease. Such understanding of the brain can fundamentally reduce the constant specialised clinical expertise in order to accurately understand brain variability. △ Less

Submitted 29 February, 2020; originally announced March 2020.

Comments: To appear in the Workshop on AI for Affordable Healthcare (AI4AH) at ICLR 2020. 8 pages, 2 figures

A 1 m$^3$ Gas Time Projection Chamber with Optical Readout for Directional Dark Matter Searches: the CYGNO Experiment

Authors: E. Baracchini, R. Bedogni, F. Bellini, L. Benussi, S. Bianco, C. Capoccia, M. Caponero, G. Cavoto, I. A. Costa, E. Di Marco, G. D'Imperio, F. Iacoangeli, G. Maccarone, M. Marafini, G. Mazzitelli, A. Messina, A. Orlandi, E. Paoletti, L. Passamonti, A. Pelosi, F. Petrucci, D. Piccolo, D. Pierluigi, D. Pinci, F. Renga , et al. (3 additional authors not shown)

Abstract: The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a… ▽ More The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a three-layer GEM structure, and the light produced in the avalanche processes will be readout by a sCMOS camera, providing a 2D image of the event with a resolution of a few hundred micrometers. Photomultipliers will also provide a simultaneous fast readout of the time profile of the light production, giving information about the third coordinate and hence allowing a 3D reconstruction of the event, from which the direction of the nuclear recoil and consequently the direction of the incoming particle can be inferred. Such a detailed reconstruction of the event topology will also allow a pure and efficient signal to background discrimination. These two features are the key to reach and overcome the solar neutrino background that will ultimately limit non-directional dark matter searches. △ Less

Submitted 8 January, 2020; originally announced January 2020.

Comments: 5 page, 7 figures, contribution to the Conference Records of 2018 IEEE NSS/MIC

Preliminary results of Resistive Plate Chambers operated with eco-friendly gas mixtures for application in the CMS experiment

Authors: M. Abbrescia, P. Van Auwegem, L. Benussi, S. Bianco, S. Cauwenbergh, M. Ferrini, S. Muhammad, L. Passamonti, D. Pierluigi, D. Piccolo, F. Primavera, A. Russo, G. Saviano, M. Tytgat

Abstract: The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of ef… ▽ More The operations of Resistive Plate Chambers in LHC experiments require Fluorine based (F-based) gases for optimal performance. Recent European regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. In view of the CMS experiment upgrade, several tests are ongoing to measure the performance of the detector with these new ecological gas mixtures, in terms of efficiency, streamer probability, induced charge and time resolution. Prototype chambers with readout pads and with the standard CMS electronic setup are under test. In this paper preliminary results on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze, with CO2 and CF3I based gas mixtures are presented and discussed for the possible application in the CMS experiment. △ Less

Submitted 26 May, 2016; originally announced May 2016.

Comments: 7 pages, 7 figures. arXiv admin note: text overlap with arXiv:1505.01648

Eco-friendly gas mixtures for Resistive Plate Chambers based on Tetrafluoropropene and Helium

Authors: M. Abbrescia, L. Benussi, S. Bianco, M. Ferrini, S. Muhammad, L. Passamonti, D. Pierluigi, D. Piccolo, F. Primavera, A. Russo, G. Saviano

Abstract: Due to the recent restrictions deriving from the application of the Kyoto protocol, the main components of the gas mixtures presently used in the Resistive Plate Chambers systems of the LHC experiments will be most probably phased out of production in the coming years. Identifying possible replacements with the adequate characteristics requires an intense R&D, which was recently started, also in c… ▽ More Due to the recent restrictions deriving from the application of the Kyoto protocol, the main components of the gas mixtures presently used in the Resistive Plate Chambers systems of the LHC experiments will be most probably phased out of production in the coming years. Identifying possible replacements with the adequate characteristics requires an intense R&D, which was recently started, also in collaborations across the various experiments. Possible candidates have been proposed and are thoroughly investigated. Some tests on one of the most promising candidate - HFO-1234ze, an allotropic form of tetrafluoropropane- have already been reported. Here an innovative approach, based on the use of Helium, to solve the problems related to the too elevate operating voltage of HFO-1234ze based gas mixtures, is discussed and the relative first results are shown. △ Less

Submitted 4 May, 2016; originally announced May 2016.

Comments: 9 pages, 6 figures, 1 table

Fiber Bragg Grating sensors for deformation monitoring of GEM foils in HEP detectors

Authors: L. Benussi, S. Bianco, M. Caponero, S. Muhammad, L. Passamonti, D. Piccolo, D. Pierluigi, G. Raffone, A. Russo, G. Saviano

Abstract: Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioni… ▽ More Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide Gas Electron Multiplier (GEM) foils of the GE1/1 chambers of the Compact Muon Solenoid (CMS) experiment at Large Hadron Collider (LHC) of CERN. A network of FBG sensors has been used to determine the optimal mechanical tension applied and to characterize the mechanical stress applied to the foils. The preliminary results of the test performed on a full size GE1/1 final prototype and possible future developments will be discussed. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: Four pages, seven figures. Presented by Michele Caponero at IWASI 2015, Gallipoli (Italy)

Report number: Frascati preprint INFN-15-13/LNF

Characterization of the GEM foil materials

Authors: L. Benussi, S. Bianco, G. Saviano, S. Muhammad, D. Piccolo, G. Raffone, M. Caponero, L. Passamonti, D. Pierluigi, A. Russo, F. Primavera, S. Cerbelli, A. Lalli, M. Valente, M. Ferrini, B. Teissandier, M. Taborelli, M. Parvis, S. Grassini, J. Tirilló, F. Sarasini, A. V. Franchi

Abstract: Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL M… ▽ More Systematic studies on the GEM foil material are performed to measure the moisture diffusion rate and saturation level. These studies are important because the presence of this compound inside the detector's foil can possibly change its mechanical and electrical properties and, in such a way, the detector performance can be affected. To understand this phenomenon, a model is developed with COMSOL Multhiphysics v. 4.3, which described the adsorption and diffusion within the geometry of GEM foil, the concentration profiles and the time required to saturate the foil. The COMSOL model is verified by experimental observations on a GEM foil sample. This note will describe the model and its experimental verification results. △ Less

Submitted 29 December, 2015; originally announced December 2015.

Comments: Four pages, eight figures, presented by S. Muhammad at the MPGD2015, Trieste, Italy

Report number: INFN-15-12/LNF

A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active are… ▽ More We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: 4 pages, 4 figures, presented by Luigi Benussi at MPGD 2015 (Trieste, Italy). arXiv admin note: text overlap with arXiv:1512.08481

Report number: INFN-15-10/LNF

Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: Two pages, one figure. Presented by Luigi Benussi (corresponding author) to Elba 2015 conference

Report number: Frascati Preprint INFN-15-09/LNF

A study of HFO-1234ze (1,3,3,3-Tetrafluoropropene) as an eco-friendly replacement in RPC detectors

Authors: L. Benussi, S. Bianco, M. Ferrini, L. Passamonti, D. Pierluigi, D. Piccolo, A. Russo, G. Saviano

Abstract: The operations of Resistive Plate Chambers in LHC experiments require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This report shows results of studies on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze. The operations of Resistive Plate Chambers in LHC experiments require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This report shows results of studies on performance of RPCs operated with a potential eco-friendly gas candidate 1,3,3,3-Tetrafluoropropene, commercially known as HFO-1234ze. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: 15 pages, 20 figures

Report number: INFN report INFN-14-14/LNF

Performance of the gas gain monitoring system of the CMS RPC muon detector

Authors: L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, G. Raffone, A. Russo, G. Saviano, Y. Ban, J. Cai, Q. Li, S. Liu, S. Qian, D. Wang, Z. Xu, F. Zhang, Y. Choi, D. Kim, S. Choi, B. Hong, J. W. Kang, M. Kang, J. H. Kwon, K. S. Lee, S. K. Park , et al. (60 additional authors not shown)

Abstract: The RPC muon detector of the CMS experiment at the LHC (CERN, Geneva, Switzerland) is equipped with a Gas Gain Monitoring (GGM) system. A report on the stability of the system during the 2011-2012 data taking run is given, as well as the observation of an effect which suggests a novel method for the monitoring of gas mixture composition. The RPC muon detector of the CMS experiment at the LHC (CERN, Geneva, Switzerland) is equipped with a Gas Gain Monitoring (GGM) system. A report on the stability of the system during the 2011-2012 data taking run is given, as well as the observation of an effect which suggests a novel method for the monitoring of gas mixture composition. △ Less

Submitted 27 December, 2014; originally announced December 2014.

Comments: Presented at RPC2014, Bei**g, China. Accepted for publication on JINST

Report number: INFN-14-22/LNF

Study of gas contaminants and interaction with materials in RPC closed loop system

Authors: S. Colafranceschi, R. Aurilio, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, M. Ferrini, T. Greci, G. Saviano, C. Vendittozzi, M. Abbrescia, C. Calabria, A. Colaleo, G. Iaselli, M. Maggi, S. Nuzzo, G. Pugliese, P. Verwilligen, A. Sharma

Abstract: Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with new and used cartridge material along with contaminan… ▽ More Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with new and used cartridge material along with contaminants release in the gas system. During the data-taking the response of several RPC double-gap detectors was monitored in order to characterize the correlation between dark currents, filter status and gas contaminants. △ Less

Submitted 22 March, 2013; v1 submitted 21 February, 2013; originally announced February 2013.

Comments: This paper has been withdrawn by the authors. revised version of already uploaded paper [1210.1819]

A study of gas contaminants and interaction with materials in RPC closed loop systems

Authors: S. Colafranceschi, R. Aurilio, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, M. Ferrini, T. Greci, G. Saviano, C. Vendittozzi, M. Abbrescia, C. Calabria, A. Colaleo, G. Iaselli, M. Maggi, S. Nuzzo, G. Pugliese, P. Verwilligen, A. Sharma

Abstract: Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with unused and used cartridge material along with contami… ▽ More Resistive Plate Counters (RPC) detectors at the Large Hadron Collider (LHC) experiments use gas recirculation systems to cope with large gas mixture volumes and costs. In this paper a long-term systematic study about gas purifiers, gas contaminants and detector performance is discussed. The study aims at measuring the lifetime of purifiers with unused and used cartridge material along with contaminants release in the gas system. During the data-taking the response of several RPC double-gap detectors was monitored in order to characterize the correlation between dark currents, filter status and gas contaminants. △ Less

Submitted 5 October, 2012; originally announced October 2012.

Performance of the Gas Gain Monitoring system of the CMS RPC muon detector and effective working point fine tuning

Authors: S. Colafranceschi, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, C. Vendittozzi, M. Abbrescia, A. Aleksandrov, U. Berzano, C. Calabria, C. Carrillo, A. Colaleo, V. Genchev, P. Iaydjiev, M. Kang, K. S. Lee, F. Loddo, S. K. Park, G. Pugliese, M. Maggi, S. Shin, M. Rodozov , et al. (3 additional authors not shown)

Abstract: The Gas Gain Monitoring (GGM) system of the Resistive Plate Chamber (RPC) muon detector in the Compact Muon Solenoid (CMS) experiment provides fast and accurate determination of the stability in the working point conditions due to gas mixture changes in the closed loop recirculation system. In 2011 the GGM began to operate using a feedback algorithm to control the applied voltage, in order to keep… ▽ More The Gas Gain Monitoring (GGM) system of the Resistive Plate Chamber (RPC) muon detector in the Compact Muon Solenoid (CMS) experiment provides fast and accurate determination of the stability in the working point conditions due to gas mixture changes in the closed loop recirculation system. In 2011 the GGM began to operate using a feedback algorithm to control the applied voltage, in order to keep the GGM response insensitive to environmental temperature and atmospheric pressure variations. Recent results are presented on the feedback method used and on alternative algorithms. △ Less

Submitted 18 September, 2012; originally announced September 2012.

Study of gas purifiers for the CMS RPC detector

Authors: L. Benussi, S. Bianco, S. Colafranceschi, F. L. Fabbri, F. Felli, M. Ferrini, M. Giardoni, T. Greci, A. Paolozzi, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, S. Buontempo, A. Cimmino, M. de Gruttola, F Fabozzi d A. O. M. Iorio, L. Lista, P. Paolucci, P. Baesso, G. Belli, D. Pagano, S. P. Ratti, A. Vicini , et al. (4 additional authors not shown)

Abstract: The CMS RPC muon detector utilizes a gas recirculation system called closed loop (CL) to cope with large gas mixture volumes and costs. A systematic study of CL gas purifiers has been carried out over 400 days between July 2008 and August 2009 at CERN in a low-radiation test area, with the use of RPC chambers with currents monitoring, and gas analysis sampling points. The study aimed to fully clar… ▽ More The CMS RPC muon detector utilizes a gas recirculation system called closed loop (CL) to cope with large gas mixture volumes and costs. A systematic study of CL gas purifiers has been carried out over 400 days between July 2008 and August 2009 at CERN in a low-radiation test area, with the use of RPC chambers with currents monitoring, and gas analysis sampling points. The study aimed to fully clarify the presence of pollutants, the chemistry of purifiers used in the CL, and the regeneration procedure. Preliminary results on contaminants release and purifier characterization are reported. △ Less

Submitted 26 December, 2010; originally announced December 2010.

A new approach in modeling the response of RPC detectors

Authors: L. Benussi, S. Bianco, S. Colafranceschi, F. L. Fabbri, M. Giardoni, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo, G. Saviano, S. Buontempo, A. Cimmino, M. de Gruttola, F Fabozzi, A. O. M. Iorio, L. Lista, P. Paolucci, P. Baesso, G. Belli, D. Pagano, S. P. Ratti, A. Vicini, P. Vitulo, C. Viviani, A. Sharma , et al. (1 additional authors not shown)

Abstract: The response of RPC detectors is highly sensitive to environmental variables. A novel approach is presented to model the response of RPC detectors in a variety of experimental conditions. The algorithm, based on Artificial Neural Networks, has been developed and tested on the CMS RPC gas gain monitoring system during commissioning. The response of RPC detectors is highly sensitive to environmental variables. A novel approach is presented to model the response of RPC detectors in a variety of experimental conditions. The algorithm, based on Artificial Neural Networks, has been developed and tested on the CMS RPC gas gain monitoring system during commissioning. △ Less

Submitted 26 December, 2010; originally announced December 2010.

Construction of the first full-size GEM-based prototype for the CMS high-$η$ muon system

Authors: D. Abbaneo, S. Bally, H. Postema, A. Conde Garcia, J. P. Chatelain, G. Faber, L. Ropelewski, S. Duarte Pinto, G. Croci, M. Alfonsi, M. Van Stenis, A. Sharma, L. Benussi, S. Bianco, S. Colafranceschi, F. Fabbri, L. Passamonti, D. Piccolo, D. Pierluigi, G. Raffone, A. Russo, G. Saviano, A. Marinov, M. Tytgat, N. Zaganidis , et al. (10 additional authors not shown)

Abstract: In view of a possible extension of the forward CMS muon detector system and future LHC luminosity upgrades, Micro-Pattern Gas Detectors (MPGDs) are an appealing technology. They can simultaneously provide precision tracking and fast trigger information, as well as sufficiently fine segmentation to cope with high particle rates in the high-eta region at LHC and its future upgrades. We report on the… ▽ More In view of a possible extension of the forward CMS muon detector system and future LHC luminosity upgrades, Micro-Pattern Gas Detectors (MPGDs) are an appealing technology. They can simultaneously provide precision tracking and fast trigger information, as well as sufficiently fine segmentation to cope with high particle rates in the high-eta region at LHC and its future upgrades. We report on the design and construction of a full-size prototype for the CMS endcap system, the largest Triple-GEM detector built to-date. We present details on the 3D modeling of the detector geometry, the implementation of the readout strips and electronics, and the detector assembly procedure. △ Less

Submitted 9 December, 2010; v1 submitted 7 December, 2010; originally announced December 2010.

Comments: 5 pages, 11 figures, presented by S.Colafranceschi at IEEE 2010 (Knoxville, USA)

Report number: RD51-NOTE-2010-008, Frascati Preprint LNF - 10 / 24(P)

Sensitivity and environmental response of the CMS RPC gas gain monitoring system

Authors: L. Benussi, S. Bianco, S. Colafranceschi, F. L. Fabbri, M. Giardoni, B. Ortenzi, A. Paolozzi, L. Passamonti, D. Pierluigi, B. Ponzio, A. Russo, A. Colaleo, F. Loddo, M. Maggi, A. Ranieri, M. Abbrescia, G. Iaselli, B. Marangelli, S. Natali, S. Nuzzo, G. Pugliese, F. Romano, G. Roselli, R. Trentadue, S. Tupputi , et al. (13 additional authors not shown)

Abstract: Results from the gas gain monitoring (GGM) system for the muon detector using RPC in the CMS experiment at the LHC is presented. The system is designed to provide fast and accurate determination of any shift in the working point of the chambers due to gas mixture changes. Results from the gas gain monitoring (GGM) system for the muon detector using RPC in the CMS experiment at the LHC is presented. The system is designed to provide fast and accurate determination of any shift in the working point of the chambers due to gas mixture changes. △ Less

Submitted 9 December, 2008; originally announced December 2008.

Comments: 8 pages, 7 figures, uses lnfprepCMS.sty, presented by S. Colafranceschi at IEEE 08 Dresden (Germany) November 2008

Report number: Frascati Preprint LNF - 08 / 27(P)

Journal ref: JINST 4:P08006,2009

The CMS RPC gas gain monitoring system: an overview and preliminary results

Authors: L. Benussi, S. Bianco, S. Colafranceschi, D. Colonna, L. Daniello, F. L. Fabbri, M. Giardoni, B. Ortenzi, A. Paolozzi, L. Passamonti, D. Pierluigi, B. Ponzio, C. Pucci, A. Russo, G. Roselli, A. Colaleo, F. Loddo, M. Maggi, A. Ranieri, M. Abbrescia, G. Iaselli, B. Marangelli, S. Natali, S. Nuzzo, G. Pugliese , et al. (18 additional authors not shown)

Abstract: The status of the CMS RPC Gas Gain Monitoring (GGM) system developed at the Frascati Laboratory of INFN (Istituto Nazionale di Fisica Nucleare) is reported on. The GGM system is a cosmic ray telescope based on small RPC detectors operated with the same gas mixture used by the CMS RPC system. The GGM gain and efficiency are continuously monitored on-line, thus providing a fast and accurate determ… ▽ More The status of the CMS RPC Gas Gain Monitoring (GGM) system developed at the Frascati Laboratory of INFN (Istituto Nazionale di Fisica Nucleare) is reported on. The GGM system is a cosmic ray telescope based on small RPC detectors operated with the same gas mixture used by the CMS RPC system. The GGM gain and efficiency are continuously monitored on-line, thus providing a fast and accurate determination of any shift in working point conditions. The construction details and the first result of GGM commissioning are described. △ Less

Submitted 5 December, 2008; originally announced December 2008.

Comments: 8 pages, 9 figures, uses lnfprepCMS.sty, presented by L. Benussi at RPC07, Mumbai, INDIA 2008

Report number: Frascati PrePrint LNF-08/29(P)

Journal ref: Nucl.Instrum.Meth.A602:805-808,2009

Gas Analysis and Monitoring Systems for the RPC Detector of CMS at LHC

Authors: M. Abbrescia, A. Colaleo, R. Guida, G. Iaselli, R. Liuzzi, F. Loddo, M. Maggi, B. Marangelli, S. Natali, S. Nuzzo, G. Pugliese, A. Ranieri, F. Romano, R. Trentadue, L. Benussi, M. Bertani, S. Bianco, M. A. Caponero, D. Colonna, D. Donisi, F. L. Fabbri, F. Felli, M. Giardoni B. Ortenzi, M. Pallotta, A. Paolozzi , et al. (16 additional authors not shown)

Abstract: The Resistive Plate Chambers (RPC) detector of the CMS experiment at the LHC proton collider (CERN, Switzerland) will employ an online gas analysis and monitoring system of the freon-based gas mixture used. We give an overview of the CMS RPC gas system, describe the project parameters and first results on gas-chromatograph analysis. Finally, we report on preliminary results for a set of monitor… ▽ More The Resistive Plate Chambers (RPC) detector of the CMS experiment at the LHC proton collider (CERN, Switzerland) will employ an online gas analysis and monitoring system of the freon-based gas mixture used. We give an overview of the CMS RPC gas system, describe the project parameters and first results on gas-chromatograph analysis. Finally, we report on preliminary results for a set of monitor RPC. △ Less

Submitted 30 December, 2006; originally announced January 2007.

Comments: 9 pages, 8 figures. Presented by Stefano Bianco (Laboratori Nazionali di Frascati dell'INFN) at the IEEE NSS, San Diego (USA), October 2006

Report number: Frascati preprint LNF-06/34 (P)

A Novel Approach for an Integrated Straw tube-Microstrip Detector

Authors: E. Basile, F. Bellucci, L. Benussi, M. Bertani, S. Bianco, M. A. Caponero, D. Colonna, F. Di Falco, F. L. Fabbri, F. Felli, M. Giardoni, A. La Monaca, G. Mensitieri, B. Ortenzi, M. Pallotta, A. Paolozzi, L. Passamonti, D. Pierluigi, C. Pucci, A. Russo, G. Saviano, F. Massa, F. Casali, M. Bettuzzi, D. Bianconi F. Baruffaldi , et al. (1 additional authors not shown)

Abstract: We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell $^{\circledR}$ lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well. We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell $^{\circledR}$ lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well. △ Less

Submitted 28 December, 2005; originally announced December 2005.

Comments: Accepted by Transactions on Nuclear Science (2005). 11 pages, 9 figures, uses lnfprep.sty

Report number: LNF-05/32(P)

Journal ref: IEEE Trans.Nucl.Sci. 53 (2006) 1375-1379

Two- and Three-Dimensional Reconstruction and Analysis of the Straw Tubes Tomography in the Btev Experiment

Authors: E. Basile, F. Bellucci, L. Benussi, M. Bertani, S. Bianco, M. A. Caponero, D. Colonna, F. Di Falco, F. L. Fabbri, F. Felli, M. Giardoni, A. La Monaca, F. Massa, G. Mensitieri, B. Ortenzi, M. Pallotta, A. Paolozzi, L. Passamonti, D. Pierluigi, C. Pucci, A. Russo, G. Saviano F. Casali, M. Bettuzzi, D. Bianconi

Abstract: A check of the eccentricity of the aluminised kapton straw tubes used in the BTeV experiment is accomplished using X-ray tomography of the section of tubes modules. 2 and 3-dimensional images of the single tubes and of the modules are reconstructed and analysed. Preliminary results show that a precision better than 40 $μ$m can be reached on the measurement of the straw radii. A check of the eccentricity of the aluminised kapton straw tubes used in the BTeV experiment is accomplished using X-ray tomography of the section of tubes modules. 2 and 3-dimensional images of the single tubes and of the modules are reconstructed and analysed. Preliminary results show that a precision better than 40 $μ$m can be reached on the measurement of the straw radii. △ Less

Submitted 28 December, 2005; originally announced December 2005.

Comments: Presented by F.Massa at ICATPP05, Villa Olmo (Como) Italy, November 2005. 4 pages, 8 figures, uses lnfprep.sty

Report number: LNF-05/31(P)

Micrometric Position Monitoring Using Fiber Bragg Grating Sensors in Silicon Detectors

Authors: E. Basile, F. Bellucci, L. Benussi, M. Bertani, S. Bianco, M. A. Caponero, D. Colonna, F. Di Falco, F. L. Fabbri, F. Felli, M. Giardoni, A. La Monaca, F. Massa, G. Mensitieri, B. Ortenzi, M. Pallotta, A. Paolozzi, L. Passamonti, D. Pierluigi, C. Pucci, A. Russo, G. Saviano

Abstract: We show R&D results including long term stability, resolution, radiation hardness and characterization of Fiber Grating sensors used to monitor structure deformation, repositioning and surveying of silicon detector in High Energy Physics. We show R&D results including long term stability, resolution, radiation hardness and characterization of Fiber Grating sensors used to monitor structure deformation, repositioning and surveying of silicon detector in High Energy Physics. △ Less

Submitted 28 December, 2005; originally announced December 2005.

Comments: Presented by S.Bianco at ICATPP05, Villa Olmo (Como) Italy, November 2005. 5 pages, 6 figures, uses lnfprep.sty

Report number: LNF-05/30(P)

An Uncoventional Approach for a Straw Tube-Microstrip Detector

Authors: E. Basile, F. Bellucci, L. Benussi, M. Bertani, S. Bianco, M. A. Caponero, D. Colonna, F. Di Falco, F. L. Fabbri, F. Felli, M. Giardoni, A. La Monaca, G. Mensitieri, B. Ortenzi, M. Pallotta, A. Paolozzi, L. Passamonti, D. Pierluigi, C. Pucci, A. Russo, G. Saviano, S. Tomassini

Abstract: We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well. We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well. △ Less

Submitted 16 December, 2004; originally announced December 2004.

Comments: 8 pages, 7 figures uses an lnfprep.sty

Report number: LNF-04/25 (P)

The upgraded Outer em calorimeter of FOCUS at Fermilab

Authors: S. Bianco, F. L. Fabbri, M. Giardoni, L. Passamonti, V. Russo, S. Sarwar, A. Zallo, S. Carrillo, H. Mendez, G. Gianini, J. Anjos, I. Bediaga, C. Gobel, A. Laudo, J. Magnin, J. Miranda, I. Pepe, F. Simao, A. Sanchez, A. Reis

Abstract: Operational performance, algorithms, stability and physics results of the Outer em calorimeter of FOCUS are overviewed. Operational performance, algorithms, stability and physics results of the Outer em calorimeter of FOCUS are overviewed. △ Less

Submitted 30 December, 1999; originally announced December 1999.

Comments: 17 pages, 11 figures, uses Frascati preprint style. Presented by F. L. Fabbri at the VIII International Conference on Calorimetry in HEP, June 13-19, 1999, Lisbon (Portugal)

Report number: LNF-99/033(P)