-
Onset of optical-phonon cooling in multilayer graphene revealed by RF noise and black-body radiation thermometries
Authors:
D. Brunel,
S. Berthou,
R. Parret,
F. Vialla,
P. Morfin,
Q. Wilmart,
G. Fève,
J. -M. Berroir,
P. Roussignol,
C. Voisin,
B. Plaçais
Abstract:
We report on electron cooling power measurements in few-layer graphene excited by Joule heating by means of a new setup combining electrical and optical probes of the electron and phonon baths temperatures. At low bias, noise thermometry allows us to retrieve the well known acoustic phonon cooling regimes below and above the Bloch Grüneisen temperature, with additional control over the phonon bath…
▽ More
We report on electron cooling power measurements in few-layer graphene excited by Joule heating by means of a new setup combining electrical and optical probes of the electron and phonon baths temperatures. At low bias, noise thermometry allows us to retrieve the well known acoustic phonon cooling regimes below and above the Bloch Grüneisen temperature, with additional control over the phonon bath temperature. At high electrical bias, we show the relevance of direct optical investigation of the electronic temperature by means of black-body radiation measurements that provide higher accuracy than noise thermometry. In this regime, the onset of new efficient relaxation pathways involving optical modes is observed
△ Less
Submitted 29 April, 2018;
originally announced April 2018.
-
Probing the Ultimate Plasmon Confinement Limits with a Van der Waals heterostructure
Authors:
David Alcaraz Iranzo,
Sebastien Nanot,
Eduardo J. C. Dias,
Itai Epstein,
Cheng Peng,
Dmitri K. Efetov,
Mark B. Lundeberg,
Romain Parret,
Johann Osmond,
**-Yong Hong,
**g Kong,
Dirk R. Englund,
Nuno M. R. Peres,
Frank H. L. Koppens
Abstract:
The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing and nanoscale lasers. While plasmons offer an appealing avenue to confine light, Landau dam** in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon con…
▽ More
The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing and nanoscale lasers. While plasmons offer an appealing avenue to confine light, Landau dam** in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon confinement down to the ultimate limit of the lengthscale of one atom. This is achieved by far-field excitation of plasmon modes squeezed into an atomically thin hexagonal boron nitride dielectric h-BN spacer between graphene and metal rods. A theoretical model which takes into account the non-local optical response of both graphene and metal is used to describe the results. These ultra-confined plasmonic modes, addressed with far-field light excitation, enables a route to new regimes of ultra-strong light-matter interactions.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Electrical detection of hyperbolic phonon-polaritons in heterostructures of graphene and boron nitride
Authors:
Achim Woessner,
Romain Parret,
Diana Davydovskaya,
Yuanda Gao,
Jhih-Sheng Wu,
Mark B. Lundeberg,
Sébastien Nanot,
Pablo Alonso-González,
Kenji Watanabe,
Takashi Taniguchi,
Rainer Hillenbrand,
Michael M. Fogler,
James Hone,
Frank H. L. Koppens
Abstract:
Light properties in the mid-infrared can be controlled at a deep subwavelength scale using hyperbolic phonons-polaritons (HPPs) of hexagonal boron nitride (h-BN). While propagating as waveguided modes HPPs can concentrate the electric field in a chosen nano-volume. Such a behavior is at the heart of many applications including subdiffraction imaging and sensing. Here, we employ HPPs in heterostruc…
▽ More
Light properties in the mid-infrared can be controlled at a deep subwavelength scale using hyperbolic phonons-polaritons (HPPs) of hexagonal boron nitride (h-BN). While propagating as waveguided modes HPPs can concentrate the electric field in a chosen nano-volume. Such a behavior is at the heart of many applications including subdiffraction imaging and sensing. Here, we employ HPPs in heterostructures of h-BN and graphene as new nano-optoelectronic platform by uniting the benefits of efficient hot-carrier photoconversion in graphene and the hyperbolic nature of h-BN. We demonstrate electrical detection of HPPs by guiding them towards a graphene pn-junction. We shine a laser beam onto a gap in metal gates underneath the heterostructure, where the light is converted into HPPs. The HPPs then propagate as confined rays heating up the graphene leading to a strong photocurrent. This concept is exploited to boost the external responsivity of mid-infrared photodetectors, overcoming the limitation of graphene pn-junction detectors due to their small active area and weak absorption. Moreover this type of detector exhibits tunable frequency selectivity due to the HPPs, which combined with its high responsivity paves the way for efficient high-resolution mid-infrared imaging.
△ Less
Submitted 29 May, 2017;
originally announced May 2017.
-
Mid-infrared pyro-resistive graphene detector on LiNbO3
Authors:
Kavitha K. Gopalan,
Davide Janner,
Sebastien Nanot,
Romain Parret,
Mark B. Lundeberg,
Frank H. L. Koppens,
Valerio Pruneri
Abstract:
Mid-infrared (mid-IR) photo-detection has been recently growing in importance because of its multiple applications, including vibrational spectroscopy and thermal imaging. We propose and demonstrate a novel pyro-resistive photo-detection platform that combines a ferroelectric substrate (a z-cut LiNbO3 crystal) and a graphene layer transferred on top of its surface with electrical connections. Upon…
▽ More
Mid-infrared (mid-IR) photo-detection has been recently growing in importance because of its multiple applications, including vibrational spectroscopy and thermal imaging. We propose and demonstrate a novel pyro-resistive photo-detection platform that combines a ferroelectric substrate (a z-cut LiNbO3 crystal) and a graphene layer transferred on top of its surface with electrical connections. Upon strong light absorption in the LiNbO3 substrate and the subsequent temperature increase, via the pyroelectric effect, polarization (bound) charges form at the crystal surface. These causes do** into graphene which in turn changes its carrier density and conductivity. In this way, by monitoring the graphene electrical resistance one can measure the incident optical power. . Detectivities of about 10^5 cm sqrt(Hz)/W in the 6 to 10 microns wavelength region are demonstrated.We explain the underlying physical mechanism of the pyro-resistive photo-detection and propose a model that reproduces accurately the experimental results. We also show that up to two orders of magnitude larger detectivity can be achieved by optimising the geometry and operating in vacuum, thus opening the path to a new class of mid-IR photo-detectors that can challenge classical HgCdTe devices, especially in real applications where cooling is to be avoided and low cost is crucial.
△ Less
Submitted 7 September, 2016;
originally announced September 2016.
-
Graphene-based, mid-infrared, room-temperature pyroelectric bolometers with ultrahigh temperature coefficient of resistance
Authors:
U. Sassi,
R. Parret,
S. Nanot,
M. Bruna,
S. Borini,
S. Milana,
D. De Fazio,
Z. Zhuang,
E. Lidorikis,
F. H. L. Koppens,
A. C. Ferrari,
A. Colli
Abstract:
Graphene is ideally suited for photonic and optoelectronic applications, with a variety of photodetectors (PDs) in the visible, near-infrared (NIR), and THz reported to date, as well as thermal detectors in the mid-infrared (MIR). Here, we present a room temperature-MIR-PD where the pyroelectric response of a LiNbO3 crystal is transduced with high gain (up to 200) into resistivity modulation for g…
▽ More
Graphene is ideally suited for photonic and optoelectronic applications, with a variety of photodetectors (PDs) in the visible, near-infrared (NIR), and THz reported to date, as well as thermal detectors in the mid-infrared (MIR). Here, we present a room temperature-MIR-PD where the pyroelectric response of a LiNbO3 crystal is transduced with high gain (up to 200) into resistivity modulation for graphene, leading to a temperature coefficient of resistance up to 900%/K, two orders of magnitude higher than the state of the art, for a device area of 300x300um2. This is achieved by fabricating a floating metallic structure that concentrates the charge generated by the pyroelectric substrate on the top-gate capacitor of the graphene channel. This allows us to resolve temperature variations down to 15umK at 1 Hz, paving the way for a new generation of detectors for MIR imaging and spectroscopy
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Spectroscopic study of double-walled carbon nanotubes functionalization for preparation of carbon nanotube / epoxy composites
Authors:
Vincent Leon,
Romain Parret,
Robert Almairac,
Laurent Alvarez,
Moulay-Rachid Babaa,
Brian P. Doyle,
Patrick Ienny,
Philippe Parent,
Ahmed Azmi Zahab,
Jean-Louis Bantignies
Abstract:
A spectroscopic study of the amino functionalization of double-walled carbon nanotube (DWCNT) is performed. Original experimental investigations by near edge X-ray absorption fine structure spectroscopy at the C and O K-edges allow one to follow the efficiency of the chemistry during the different steps of covalent functionalization. Combined with Raman spectroscopy, the characterization gives a d…
▽ More
A spectroscopic study of the amino functionalization of double-walled carbon nanotube (DWCNT) is performed. Original experimental investigations by near edge X-ray absorption fine structure spectroscopy at the C and O K-edges allow one to follow the efficiency of the chemistry during the different steps of covalent functionalization. Combined with Raman spectroscopy, the characterization gives a direct evidence of the grafting of amino-terminated molecules on the structural defects of the DWCNT external wall, whereas the internal wall does not undergo any change. Structural and mechanical investigation of the amino functionalized DWCNT / epoxy composites show coupling between epoxy molecules and the DWCNTs. Functionalization improves the interface between amino-functionalized DWCNT and the epoxy molecules. The electrical transport measurements indicate a percolating network formed only by inner metallic tubes of the DWCNTs. The activation energy of the barriers between connected metallic tubes is determined around 20 meV.
△ Less
Submitted 31 August, 2012; v1 submitted 24 June, 2012;
originally announced June 2012.
