Showing 1–35 of 35 results for author: Pariani, G

ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design

Authors: Bruno Chazelas, Yevgeniy Ivanisenko, Audrey Lanotte, Pablo Santos Diaz, Ludovic Genolet, Michael Sordet, Ian Hughes, Christophe Lovis, Tobias M. Schmidt, Manuel Amate, José Peñate Castro, Afrodisio Vega Moreno, Fabio Tenegi, Roberto Simoes, Jonay I. González Hernández, María Rosa Zapatero Osorio, Javier Piqueras, Tomás Belenguer Dávila, Rocío Calvo Ortega, Roberto Varas González, Luis Miguel González Fernández, Pedro J. Amado, Jonathan Kern, Frank Dionies, Svend-Marian Bauer , et al. (22 additional authors not shown)

Abstract: We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-… ▽ More We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: Paper submitted to the SPIE astronomical telescope and instrumentation 2024, conference title : Ground-based and Airborne Instrumentation for Astronomy X, paper reference number : 13096-171

MORFEO enters final design phase

Authors: Lorenzo Busoni, Guido Agapito, Alessandro Ballone, Alfio Puglisi, Alexander Goncharov, Amedeo Petrella, Amico Di Cianno, Andrea Balestra, Andrea Baruffolo, Andrea Bianco, Andrea Di Dato, Angelo Valentini, Benedetta Di Francesco, Benoit Sassolas, Bernardo Salasnich, Carmelo Arcidiacono, Cedric Plantet, Christian Eredia, Daniela Fantinel, Danilo Selvestrel, Deborah Malone, Demetrio Magrin, Domenico D'Auria, Edoardo Redaelli, Elena Carolo , et al. (59 additional authors not shown)

Abstract: MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and… ▽ More MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase. △ Less

Submitted 13 October, 2023; originally announced October 2023.

CUBES: a UV spectrograph for the future

Authors: S. Covino, S. Cristiani, J. M. Alcala', S. H. P. Alencar, S. A. Balashev, B. Barbuy, N. Bastian, U. Battino, L. Bissell, P. Bristow, A. Calcines, G. Calderone, P. Cambianica, R. Carini, B. Carter, S. Cassisi, B. V. Castilho, G. Cescutti, N. Christlieb, R. Cirami, R. Conzelmann, I. Coretti, R. Cooke, G. Cremonese, K. Cunha , et al. (64 additional authors not shown)

Abstract: In spite of the advent of extremely large telescopes in the UV/optical/NIR range, the current generation of 8-10m facilities is likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral r… ▽ More In spite of the advent of extremely large telescopes in the UV/optical/NIR range, the current generation of 8-10m facilities is likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R>20,000, although a lower-resolution, sky-limited mode of R ~ 7,000 is also planned. CUBES will offer new possibilities in many fields of astrophysics, providing access to key lines of stellar spectra: a tremendous diversity of iron-peak and heavy elements, lighter elements (in particular Beryllium) and light-element molecules (CO, CN, OH), as well as Balmer lines and the Balmer jump (particularly important for young stellar objects). The UV range is also critical in extragalactic studies: the circumgalactic medium of distant galaxies, the contribution of different types of sources to the cosmic UV background, the measurement of H2 and primordial Deuterium in a regime of relatively transparent intergalactic medium, and follow-up of explosive transients. The CUBES project completed a Phase A conceptual design in June 2021 and has now entered the Phase B dedicated to detailed design and construction. First science operations are planned for 2028. In this paper, we briefly describe the CUBES project development and goals, the main science cases, the instrument design and the project organization and management. △ Less

Submitted 24 December, 2022; originally announced December 2022.

Comments: Proceedings for the HACK100 conference, Trieste, June 2022. arXiv admin note: substantial text overlap with arXiv:2208.01672

Finding high-redshift gamma-ray bursts in tandem near-infrared and optical surveys

Authors: S. Campana, G. Ghirlanda, R. Salvaterra, O. A. Gonzalez, M. Landoni, G. Pariani, A. Riva5, M. Riva, S. J. Smartt, N. R. Tanvir, S. D. Vergani

Abstract: The race for the most distant object in the Universe has been played by long-duration gamma-ray bursts (GRBs), star-forming galaxies and quasars. GRBs took a temporary lead with the discovery of GRB 090423 at a redshift z=8.2, but now the record-holder is the galaxy GN-z11 at z=11.0. Despite this record, galaxies and quasars are very faint (GN-z11 has a magnitude H=26), hampering the study of the… ▽ More The race for the most distant object in the Universe has been played by long-duration gamma-ray bursts (GRBs), star-forming galaxies and quasars. GRBs took a temporary lead with the discovery of GRB 090423 at a redshift z=8.2, but now the record-holder is the galaxy GN-z11 at z=11.0. Despite this record, galaxies and quasars are very faint (GN-z11 has a magnitude H=26), hampering the study of the physical properties of the primordial Universe. On the other hand, GRB afterglows are brighter by a factor of >100, with the drawback of lasting only for 1-2 days. Here we describe a novel approach to the discovery of high-redshift (z>6) GRBs, exploiting their near-infrared (nIR) emission properties. Soon after the bright, high-energy prompt phase, a GRB is accompanied by an afterglow. The afterglows of high-redshift GRBs are naturally absorbed, like any other source, at optical wavelengths by Hydrogen along the line of sight in the intergalactic medium (Lyman-alpha absorption). We propose to take advantage of the deep monitoring of the sky by the Vera Rubin Observatory, to simultaneously observe exactly the same fields with a new, dedicated nIR facility. By comparing the two streams of transients, one can pinpoint transients detected in the nIR band and not in the optical band. These fast transients detected only in the nIR and with an AB colour index r-H>3.5 are high-redshift GRBs, with a low contamination rate. Thanks to the depth reached by the Rubin observations, interlopers can be identified, allowing us to discover ~11 GRBs at z>6 per year and ~3 GRBs per year at z>10. This turns out to be one of the most effective probes of the high-redshift Universe. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Comments: Published in Nature Astronomy, Volume 6, pp. 1101-1104

Progress on the SOXS NIR Spectrograph AIT

Authors: Fabrizio Vitali, Matteo Aliverti, Francesco D'Alessio, Matteo Genoni, Salvatore Scuderi, Matteo Munari, Luca Oggioni, Andrea Scaudo, Giorgio Pariani, Giancarlo Bellassai, Rosario Di Benedetto, Eugenio Martinetti, Antonio Micciche', Gaetano Nicotra, Giovanni Occhipinti, Sergio Campana, Pietro Schipani, Riccardo Claudi, Giulio Capasso, Davide Ricci, Marco Riva, Ricardo Zanmar Sanchez, Jose' Antonio Araiza-Duran, Iair Arcavi, Andrea Baruffolo , et al. (28 additional authors not shown)

Abstract: The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally c… ▽ More The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally converged at the INAF-OAB premises in Merate (Italy), where the NIR spectrograph is currently being assembled and tested, before the final assembly on SOXS. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: 6 pages, 8 Figures, SPIE: Astronomical Telescope + Instrumentation, Montreal 2022

The Quality Check system architecture for Son-Of-X-Shooter SOXS

Authors: Marco Landoni, Laurent Marty, Dave Young, Laura Asquini, Stephen Smartt, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Federico Battaini, Andrea Baruffolo, Sagi Ben-Ami, Federico Biondi, Andrea Bianco, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Matteo Genoni, Ofir Hershko, Hanindyo Kuncarayakti, Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi , et al. (25 additional authors not shown)

Abstract: We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashbo… ▽ More We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashboard to be used by the operation support team. The system is designed to constantly and actively monitor the Key Performance Indicators (KPI) metrics, as much automatically as possible, reducing the overhead on the support and operation teams. Moreover, we will also detail about the interface designed to inject quality checks metrics from the automated SOXS Pipeline (Young et al. 2022). △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted for publication in SPIE Astronomical Telescope and Instrumentation Conference proceedings (Montreal, Canada July 2022)

SOXS mechanical integration and verification in Italy

Authors: M. Aliverti, F. Battaini, K. Radhakrishnan, M. Genoni, G. Pariani, L. Oggioni, O. Hershko, M. Colapietro, S. D'Orsi, A . Brucalassi, G. Pignata, H. Kuncarayakti, S . Campana, R. Claudi, P. Schipani, J . Achrén, J. A. Araiza Duranm, I. Arcavi, A. Baruffolo, S. Ben Ami, R . Bruch, G. Capasso, E. Cappellaro, R. Cosentino, F. D'Alessio , et al. (24 additional authors not shown)

Abstract: SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is planned to be installed at the NTT in La Silla by next year. It is mainly composed of five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibrati… ▽ More SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is planned to be installed at the NTT in La Silla by next year. It is mainly composed of five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling system). A brief overview of the optomechanical subsystems is presented here as more details can be found in the specific proceedings while a more comprehensive discussion is dedicated to the other mechanical subsystems and the tools needed for the integration of the instrument. Moreover, the results obtained during the acceptance of the various mechanical elements are presented together with the experiments performed to validate the functionality of the subsystems. Finally, the mechanical integration procedure is shown here, along with all the modifications applied to correct the typical problems happening in this phase. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: arXiv admin note: text overlap with arXiv:2012.12693

Dynamic scheduling for SOXS instrument: environment, algorithms and development

Authors: Laura Asquini, Marco Landoni, Dave Young, Laurent Marty, Stephen Smartt, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Federico Battaini, Andrea Baruffolo, Sagi Ben Ami, Andrea Bianco, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Ofir Hershko, Hanindyo Kuncarayaktim Matteo Munari, Giuliano Pignata, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achren , et al. (25 additional authors not shown)

Abstract: We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follo… ▽ More We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follow up of astrophysical transients, with a very wide pool of targets available from the streaming services of wide-field telescopes, current and future. This instrument will serve a variety of scientific scopes in the astrophysical community, with each scope eliciting its specific requirements for observation planning, that the observing scheduler has to meet. Due to directions from the European Southern Observatory (ESO), the instrument will be operated only by La Silla staff, with no astronomer present on the mountain. This implies a new challenge for the scheduling process, requiring a fully automated algorithm that should be able to present the operator not only with and ordered list of optimal targets, but also with optimal back-ups, should anything in the observing conditions change. This imposes a fast-response capability to the scheduler, without compromising the optimization process, that ensures good quality of the observations. In this paper we present the current state of the scheduler, that is now almost complete, and of its web interface. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: Accepted for publication in SPIE Astronomical Telescope and Instrumentation Conference proceedings - Montreal (Canada) July 2022

CUBES, the Cassegrain U-Band Efficient Spectrograph

Authors: S. Cristiani, J. M. Alcalá, S. H. P. Alencar, S. A. Balashev, N. Bastian, B. Barbuy, U. Battino, A. Calcines, G. Calderone, P. Cambianica, R. Carini, B. Carter, S. Cassisi, B. V. Castilho, G. Cescutti, N. Christlieb, R. Cirami, I. Coretti, R. Cooke, S. Covino, G. Cremonese, K. Cunha, G. Cupani, A. R. da Silva, V. De Caprio , et al. (52 additional authors not shown)

Abstract: In the era of Extremely Large Telescopes, the current generation of 8-10m facilities are likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R>20,000 (with a lowe… ▽ More In the era of Extremely Large Telescopes, the current generation of 8-10m facilities are likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high-efficiency (>40%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R>20,000 (with a lower-resolution, sky-limited mode of R ~ 7,000). With the design focusing on maximizing the instrument throughput (ensuring a Signal to Noise Ratio (SNR) ~20 per high-resolution element at 313 nm for U ~18.5 mag objects in 1h of observations), it will offer new possibilities in many fields of astrophysics, providing access to key lines of stellar spectra: a tremendous diversity of iron-peak and heavy elements, lighter elements (in particular Beryllium) and light-element molecules (CO, CN, OH), as well as Balmer lines and the Balmer jump (particularly important for young stellar objects). The UV range is also critical in extragalactic studies: the circumgalactic medium of distant galaxies, the contribution of different types of sources to the cosmic UV background, the measurement of H2 and primordial Deuterium in a regime of relatively transparent intergalactic medium, and follow-up of explosive transients. The CUBES project completed a Phase A conceptual design in June 2021 and has now entered the detailed design and construction phase. First science operations are planned for 2028. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: SPIE proceedings, SPIE Astronomical Telescopes + Instrumentation 2022, Montréal, Canada; 20 pages, 13 figures, 2 tables

CUBES Phase A design overview -- The Cassegrain U-Band Efficient Spectrograph for the Very Large Telescope

Authors: Alessio Zanutta, Stefano Cristiani, David Atkinson, Veronica Baldini, Andrea Balestra, Beatriz Barbuy, Vanessa Bawden P. Macanhan, Ariadna Calcines, Giorgio Calderone, Scott Case, Bruno V. Castilho, Gabriele Cescutti, Roberto Cirami, Igor Coretti, Stefano Covino, Guido Cupani, Vincenzo De Caprio, Hans Dekker, Paolo Di Marcantonio, Valentina D'Odorico, Heitor Ernandes, Chris Evans, Tobias Feger, Carmen Feiz, Mariagrazia Franchini , et al. (29 additional authors not shown)

Abstract: We present the baseline conceptual design of the Cassegrain U-Band Efficient Spectrograph (CUBES) for the Very Large Telescope. CUBES will provide unprecedented sensitivity for spectroscopy on a 8 - 10 m class telescope in the ground ultraviolet (UV), spanning a bandwidth of > 100 nm that starts at 300 nm, the shortest wavelength accessible from the ground. The design has been optimized for end-to… ▽ More We present the baseline conceptual design of the Cassegrain U-Band Efficient Spectrograph (CUBES) for the Very Large Telescope. CUBES will provide unprecedented sensitivity for spectroscopy on a 8 - 10 m class telescope in the ground ultraviolet (UV), spanning a bandwidth of > 100 nm that starts at 300 nm, the shortest wavelength accessible from the ground. The design has been optimized for end-to-end efficiency and provides a spectral resolving power of R > 20000, that will unlock a broad range of new topics across solar system, Galactic and extraglactic astronomy. The design also features a second, lower-resolution (R \sim 7000) mode and has the option of a fiberlink to the UVES instrument for simultaneous observations at longer wavelengths. Here we present the optical, mechanical and software design of the various subsystems of the instrument after the Phase A study of the project. We discuss the expected performances for the layout choices and highlight some of the performance trade-offs considered to best meet the instrument top-level requirements. We also introduce the model-based system engineering approach used to organize and manage the project activities and interfaces, in the context that it is increasingly necessary to integrate such tools in the development of complex astronomical projects. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Comments: Accepted for publication in Experimental Astronomy

MAORY: A Multi-conjugate Adaptive Optics RelaY for ELT

Authors: Paolo Ciliegi, Guido Agapito, Matteo Aliverti, Francesca Annibali, Carmelo Arcidiacono, Andrea Balestra, Andrea Baruffolo, Maria Bergomi, Andrea Bianco, Marco Bonaglia, Lorenzo Busoni, Michele Cantiello, Enrico Cascone, Gael Chauvin, Simonetta Chinellato, Vincenzo Cianniello, Jean Jacques Correira, Giuseppe Cosentino, Massimo Dall'Ora, Vincenzo De Caprio, Nicholas Devaney, Ivan Di Antonio, Amico Di Cianno, Ugo Di Giammatteo, Valentina D'Orazi , et al. (51 additional authors not shown)

Abstract: MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural gui… ▽ More MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural guide stars while the wavefront sensor compensation is performed by an adaptive deformable mirror in MAORY which works together with the telescope's adaptive and tip tilt mirrors M4 and M5 respectively. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: 4 pages, 4 figures

Journal ref: The Messenger 182 (March 2021): 13-16

Manufacturing, integration, and mechanical verification of SOXS

Authors: M. Aliverti, L. Oggioni, M. Genoni, G. Pariani, O. Hershko, A. Brucalassi, G. Pignata, H. Kuncarayakti, R. Zanmar Sanchez, M. Munari, S. Campana, P. Schipani, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, M. Landoni, A. Rubin, S. Scuderi, F. Vitali, D. Young , et al. (24 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flan… ▽ More SOXS (Son Of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is planned to be installed at the NTT in La Silla and it is mainly composed by five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling). It is currently in the procurement and integration phase. In this paper we present the post-FDR modifications in the mechanical design due to the various iterations with the manufacturers and the actual procurement status. The last part describes the strategy used to keep under control the mechanical interfaces between the subsystems. △ Less

Submitted 23 December, 2020; originally announced December 2020.

SOXS End-to-End simulator: development and applications for pipeline design

Authors: M. Genoni, M. Landoni, G. Li Causi, G. Pariani, M. Aliverti, S. Campana, P. Schipani, R. Claudi, M. Munari, A. Rubin, P. D'Avanzo, M. Riva, A. Baruffolo, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, O. Hershko, H. Kuncarayakti, G. Pignata, S. Scuderi, K. Radhakrishnan, S. Ben-Ami, F. Vitali, D. Young , et al. (22 additional authors not shown)

Abstract: We present the development of the End-to-End simulator for the SOXS instrument at the ESO-NTT 3.5-m telescope. SOXS will be a spectroscopic facility, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2000 nm with resolving power R=4500. The E2E model allows to simulate the propagation of photons starting from the scientific target of interest up to the detectors.… ▽ More We present the development of the End-to-End simulator for the SOXS instrument at the ESO-NTT 3.5-m telescope. SOXS will be a spectroscopic facility, made by two arms high efficiency spectrographs, able to cover the spectral range 350-2000 nm with resolving power R=4500. The E2E model allows to simulate the propagation of photons starting from the scientific target of interest up to the detectors. The outputs of the simulator are synthetic frames, which will be mainly exploited for optimizing the pipeline development and possibly assisting for proper alignment and integration phases in laboratory and at the telescope. In this paper, we will detail the architecture of the simulator and the computational model, which are strongly characterized by modularity and flexibility. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Journal ref: Proc. SPIE 11450, Modeling, Systems Engineering, and Project Management for Astronomy IX, 114501B (13 December 2020)

Fundamental physics with Espresso: Towards an accurate wavelength calibration for a precision test of the fine-structure constant

Authors: Tobias M. Schmidt, Paolo Molaro, Michael T. Murphy, Christophe Lovis, Guido Cupani, Stefano Cristiani, Francesco A. Pepe, Rafael Rebolo, Nuno C. Santos, Manuel Abreu, Vardan Adibekyan, Yann Alibert, Matteo Aliverti, Romain Allart, Carlos Allende Prieto, David Alves, Veronica Baldini, Christopher Broeg, Alexandre Cabral, Giorgio Calderone, Roberto Cirami, João Coelho, Igor Coretti, Valentina D'Odorico, Paolo Di Marcantonio , et al. (34 additional authors not shown)

Abstract: Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from… ▽ More Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from the new ultra-stable high-resolution spectrograph Espresso, recently installed at the VLT. In preparation of the fundamental physics related part of the Espresso GTO program, we present a thorough assessment of the Espresso wavelength accuracy and identify possible systematics at each of the different steps involved in the wavelength calibration process. Most importantly, we compare the default wavelength solution, based on the combination of Thorium-Argon arc lamp spectra and a Fabry-Pérot interferometer, to the fully independent calibration obtained from a laser frequency comb. We find wavelength-dependent discrepancies of up to 24m/s. This substantially exceeds the photon noise and highlights the presence of different sources of systematics, which we characterize in detail as part of this study. Nevertheless, our study demonstrates the outstanding accuracy of Espresso with respect to previously used spectrographs and we show that constraints of a relative change of the fine-structure constant at the $10^{-6}$ level can be obtained with Espresso without being limited by wavelength calibration systematics. △ Less

Submitted 27 November, 2020; originally announced November 2020.

Comments: 27 pages, accepted for publication in A&A

Journal ref: A&A 646, A144 (2021)

HIRES, the high-resolution spectrograph for the ELT

Authors: Alessandro Marconi, Manuel Abreu, Vardan Adibekyan, Matteo Aliverti, Carlos Allende Prieto, Pedro J. Amado, Manuel Amate, Etienne Artigau, Sergio R. Augusto, Susana Barros, Santiago Becerril, Bjorn Benneke, Edwin Bergin, Philippe Berio, Naidu Bezawada, Isabelle Boisse, Xavier Bonfils, Francois Bouchy, Christopher Broeg, Alexandre Cabral, Rocio Calvo-Ortega, Bruno Leonardo Canto Martins, Bruno Chazelas, Andrea Chiavassa, Lise B. Christensen , et al. (77 additional authors not shown)

Abstract: HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a spectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small dif… ▽ More HIRES will be the high-resolution spectrograph of the European Extremely Large Telescope at optical and near-infrared wavelengths. It consists of three fibre-fed spectrographs providing a wavelength coverage of 0.4-1.8 mic (goal 0.35-1.8 mic) at a spectral resolution of ~100,000. The fibre-feeding allows HIRES to have several, interchangeable observing modes including a SCAO module and a small diffraction-limited IFU in the NIR. Therefore, it will be able to operate both in seeing and diffraction-limited modes. ELT-HIRES has a wide range of science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Some of the top science cases will be the detection of bio signatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars (PopIII), tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The HIRES consortium is composed of more than 30 institutes from 14 countries, forming a team of more than 200 scientists and engineers. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Comments: to appear in the ESO Messenger No.182, December 2020

ESPRESSO high resolution transmission spectroscopy of WASP-76b

Authors: H. M. Tabernero, M. R. Zapatero Osorio, R. Allart, F. Borsa, N. Casasayas-Barris, O. Demangeon, D. Ehrenreich, J. Lillo-Box, C. Lovis, E. Pallé, S. G. Sousa, R. Rebolo, N. C. Santos, F. Pepe, S. Cristiani, V. Adibekyan, C. Allende Prieto, Yann Alibert, S. C. C. Barros, F. Bouchy, V. Bourrier, V. D'Odorico, X. Dumusque, J. P. Faria, P. Figueira , et al. (66 additional authors not shown)

Abstract: Aims. We report on ESPRESSO high-resolution transmission spectroscopic observations of two primary transits of the highly-irradiated, ultra-hot Jupiter-size planet WASP-76b. We investigate the presence of several key atomic and molecular features of interest that may reveal the atmospheric properties of the planet. Methods. We extracted two transmission spectra of WASP-76b with R approx 140,000 us… ▽ More Aims. We report on ESPRESSO high-resolution transmission spectroscopic observations of two primary transits of the highly-irradiated, ultra-hot Jupiter-size planet WASP-76b. We investigate the presence of several key atomic and molecular features of interest that may reveal the atmospheric properties of the planet. Methods. We extracted two transmission spectra of WASP-76b with R approx 140,000 using a procedure that allowed us to process the full ESPRESSO wavelength range (3800-7880 A) simultaneously. We observed that at a high signal-to-noise ratio, the continuum of ESPRESSO spectra shows wiggles that are likely caused by an interference pattern outside the spectrograph. To search for the planetary features, we visually analysed the extracted transmission spectra and cross-correlated the observations against theoretical spectra of different atomic and molecular species. Results. The following atomic features are detected: Li I, Na I, Mg I, Ca II, Mn I, K I, and Fe I. All are detected with a confidence level between 9.2 sigma (Na I) and 2.8 sigma (Mg I). We did not detect the following species: Ti I, Cr I, Ni I, TiO, VO, and ZrO. We impose the following 1 sigma upper limits on their detectability: 60, 77, 122, 6, 8, and 8 ppm, respectively. Conclusions. We report the detection of Li I on WASP-76b for the first time. In addition, we found the presence of Na I and Fe I as previously reported in the literature. We show that the procedure employed in this work can detect features down to the level of ~ 0.1 % in the transmission spectrum and ~ 10 ppm by means of a cross-correlation method. We discuss the presence of neutral and singly ionised features in the atmosphere of WASP-76b. △ Less

Submitted 24 November, 2020; originally announced November 2020.

Comments: 20 pages, 19 figures, accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 646, A158 (2021)

ESPRESSO@VLT -- On-sky performance and first results

Authors: F. Pepe, S. Cristiani, R. Rebolo, N. C. Santos, H. Dekker, A. Cabral, P. Di Marcantonio, P. Figueira, G. Lo Curto, C. Lovis, M. Mayor, D. Mégevand, P. Molaro, M. Riva, M. R. Zapatero Osorio, M. Amate, A. Manescau, L. Pasquini, F. M. Zerbi, V. Adibekyan, M. Abreu, M. Affolter, Y. Alibert, M. Aliverti, R. Allart , et al. (75 additional authors not shown)

Abstract: ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolvi… ▽ More ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolving power of 140,000 or 190,000 over the 378.2 to 788.7 nm wavelength range, or with all UTs together, turning the VLT into a 16-m diameter equivalent telescope in terms of collecting area, while still providing a resolving power of 70,000. We provide a general description of the ESPRESSO instrument, report on the actual on-sky performance, and present our Guaranteed-Time Observation (GTO) program with its first results. ESPRESSO was installed on the Paranal Observatory in fall 2017. Commissioning (on-sky testing) was conducted between December 2017 and September 2018. The instrument saw its official start of operations on October 1st, 2018, but improvements to the instrument and re-commissioning runs were conducted until July 2019. The measured overall optical throughput of ESPRESSO at 550 nm and a seeing of 0.65 arcsec exceeds the 10% mark under nominal astro-climatic conditions. We demonstrate a radial-velocity precision of better than 25 cm/s during one night and 50 cm/s over several months. These values being limited by photon noise and stellar jitter show that the performanceis compatible with an instrumental precision of 10 cm/s. No difference has been measured across the UTs neither in throughput nor RV precision. The combination of the large collecting telescope area with the efficiency and the exquisite spectral fidelity of ESPRESSO opens a new parameter space in RV measurements, the study of planetary atmospheres, fundamental constants, stellar characterisation and many other fields. △ Less

Submitted 1 October, 2020; originally announced October 2020.

Comments: 26 pages, 28 figures

End to end simulators: A flexible and scalable Cloud-Based architecture. Application to High Resolution Spectrographs ESPRESSO and ELT-HIRES

Authors: M. Genoni, M. Landoni, G. Pariani, M. Riva, A. Bianco, G. Li Causi, T. Marquart, F. A. Pepe, A. Marconi, E. Oliva

Abstract: Simulations of frames from existing and upcoming high-resolution spectrographs, targeted for high accuracy radial velocity measurements, are computationally demanding (both in time and space). We present in this paper an innovative approach based on both parallelization and distribution of the workload. By using NVIDIA CUDA custom-made kernels and state-of-the-art cloud-computing architectures in… ▽ More Simulations of frames from existing and upcoming high-resolution spectrographs, targeted for high accuracy radial velocity measurements, are computationally demanding (both in time and space). We present in this paper an innovative approach based on both parallelization and distribution of the workload. By using NVIDIA CUDA custom-made kernels and state-of-the-art cloud-computing architectures in a Platform as a Service (PaaS) approach, we implemented a modular and scalable end-to-end simulator that is able to render synthetic frames with an accuracy of the order of few cm/sec, while kee** the computational time low. We applied our approach to two spectrographs. For VLT-ESPRESSO we give a sound comparison between the actual data and the simulations showing the obtained spectral formats and the recovered instrumental profile. We also simulate data for the upcoming HIRES at the ELT and investigate the overall performance in terms of computational time and scalability against the size of the problem. In addition we demonstrate the interface with data-reduction systems and we preliminary show that the data can be reduced successfully by existing methods. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Comments: Accepted for publication in Experimental Astronomy

A precise architecture characterization of the $π$ Men planetary system

Authors: M. Damasso, A. Sozzetti, C. Lovis, S. C. C. Barros, S. G. Sousa, O. D. S. Demangeon, J. P. Faria, J. Lillo-Box, S. Cristiani, F. Pepe, R. Rebolo, N. C. Santos, M. R. Zapatero Osorio, J. I. González Hernández, M. Amate, L. Pasquini, F. M. Zerbi, V. Adibekyan, M. Abreu, M. Affolter, Y. Alibert, M. Aliverti, R. Allart, C. Allende Prieto, D. Álvarez , et al. (75 additional authors not shown)

Abstract: The bright star $π$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precis… ▽ More The bright star $π$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precise multi-technique characterization. With the new ESPRESSO observations, that cover a time span of 200 days, we aim to improve the precision and accuracy of the planet parameters and search for additional low-mass companions. We also take advantage of new photometric transits of $π$ Men c observed by TESS over a time span that overlaps with that of the ESPRESSO follow-up campaign. We analyse the enlarged spectroscopic and photometric datasets and compare the results to those in the literature. We further characterize the system by means of absolute astrometry with Hipparcos and Gaia. We used the spectra of ESPRESSO for an independent determination of the stellar fundamental parameters. We present a precise characterization of the planetary system around $π$ Men. The ESPRESSO radial velocities alone (with typical uncertainty of 10 cm/s) allow for a precise retrieval of the Doppler signal induced by $π$ Men c. The residuals show an RMS of 1.2 m/s, and we can exclude companions with a minimum mass less than $\sim$2 M$_\oplus$ within the orbit of $π$ Men c). We improve the ephemeris of $π$ Men c using 18 additional TESS transits, and in combination with the astrometric measurements, we determine the inclination of the orbital plane of $π$ Men b with high precision ($i_{b}=45.8^{+1.4}_{-1.1}$ deg). This leads to the precise measurement of its absolute mass $m_{b}=14.1^{+0.5}_{-0.4}$ M$_{Jup}$, and shows that the planetary orbital planes are highly misaligned. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: Accepted for publication on A&A

Journal ref: A&A 642, A31 (2020)

Characterization of the K2-38 planetary system. Unraveling one of the densest planets known to date

Authors: B. Toledo-Padrón, C. Lovis, A. Suárez Mascareño, S. C. C. Barros, J. I. González Hernández, A. Sozzetti, F. Bouchy, M. R. Zapatero Osorio, R. Rebolo, S. Cristiani, F. A. Pepe, N. C. Santos, S. G. Sousa, H. M. Tabernero, J. Lillo-Box, D. Bossini, V. Adibekyan, R. Allart, M. Damasso, V. D'Odorico, P. Figueira, B. Lavie, G. Lo Curto, A. Mehner, G. Micela , et al. (68 additional authors not shown)

Abstract: We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously… ▽ More We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously published HIRES RV measurements, we modeled the orbits of the two planets through a MCMC analysis, significantly improving their mass measurements. Using ESPRESSO spectra, we derived the stellar parameters, $T_{\rm eff}$=5731$\pm$66, $\log g$=4.38$\pm$0.11~dex, and $[Fe/H]$=0.26$\pm$0.05~dex, and thus the mass and radius of K2-38, $M_{\star}$=1.03 $^{+0.04}_{-0.02}$~M$_{\oplus}$ and $R_{\star}$=1.06 $^{+0.09}_{-0.06}$~R$_{\oplus}$. We determine new values for the planetary properties of both planets. We characterize K2-38b as a super-Earth with $R_{\rm P}$=1.54$\pm$0.14~R$_{\rm \oplus}$ and $M_{\rm p}$=7.3$^{+1.1}_{-1.0}$~M$_{\oplus}$, and K2-38c as a sub-Neptune with $R_{\rm P}$=2.29$\pm$0.26~R$_{\rm \oplus}$ and $M_{\rm p}$=8.3$^{+1.3}_{-1.3}$~M$_{\oplus}$. We derived a mean density of $ρ_{\rm p}$=11.0$^{+4.1}_{-2.8}$~g cm$^{-3}$ for K2-38b and $ρ_{\rm p}$=3.8$^{+1.8}_{-1.1}$~g~cm$^{-3}$ for K2-38c, confirming K2-38b as one of the densest planets known to date. The best description for the composition of K2-38b comes from an iron-rich Mercury-like model, while K2-38c is better described by a rocky model with a H2 envelope. The maximum collision strip** boundary shows how giant impacts could be the cause for the high density of K2-38b. The irradiation received by each planet places them on opposite sides of the radius valley. We find evidence of a long-period signal in the radial velocity time-series whose origin could be linked to a 0.25-3~M$_{\rm J}$ planet or stellar activity. △ Less

Submitted 1 October, 2020; v1 submitted 2 July, 2020; originally announced July 2020.

Comments: 16 pages, 14 figures

Journal ref: A&A 641, A92 (2020)

Revisiting Proxima with ESPRESSO

Authors: A. Suárez Mascareño, J. P. Faria, P. Figueira, C. Lovis, M. Damasso, J. I. González Hernández, R. Rebolo, S. Cristiano, F. Pepe, N. C. Santos, M. R. Zapatero Osorio, V. Adibekyan, S. Hojjatpanah, A. Sozzetti, F. Murgas, M. Abreo, M. Affolter, Y. Alibert, M. Aliverti, R. Allart, C. Allende Prieto, D. Alves, M. Amate, G. Avila, V. Baldini , et al. (66 additional authors not shown)

Abstract: We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC an… ▽ More We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days. △ Less

Submitted 26 May, 2020; v1 submitted 25 May, 2020; originally announced May 2020.

Comments: 25 pages, 26 figures

Journal ref: A&A 639, A77 (2020)

Performance Verification of the EXtreme PREcision Spectrograph

Authors: Ryan T. Blackman, Debra A. Fischer, Colby A. Jurgenson, David Sawyer, Tyler M. McCracken, Andrew E. Szymkowiak, Ryan R. Petersburg, J. M. Joel Ong, John M. Brewer, Lily L. Zhao, Christopher Leet, Lars A. Buchhave, René Tronsgaard, Joe Llama, Travis Sawyer, Allen B. Davis, Samuel H. C. Cabot, Michael Shao, Russell Trahan, Bijan Nemati, Matteo Genoni, Giorgio Pariani, Marco Riva, Rafael A. Probst, Ronald Holzwarth , et al. (3 additional authors not shown)

Abstract: The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individu… ▽ More The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm/s, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser frequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on radial velocity precision due to pixel-position non-uniformities (PPNU) and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter-McLaughlin effect. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Comments: 39 pages, 30 figures, accepted to AJ

Nightside condensation of iron in an ultra-hot giant exoplanet

Authors: David Ehrenreich, Christophe Lovis, Romain Allart, María Rosa Zapatero Osorio, Francesco Pepe, Stefano Cristiani, Rafael Rebolo, Nuno C. Santos, Francesco Borsa, Olivier Demangeon, Xavier Dumusque, Jonay I. González Hernández, Núria Casasayas-Barris, Damien Ségransan, Sérgio Sousa, Manuel Abreu, Vardan Adibekyan, Michael Affolter, Carlos Allende Prieto, Yann Alibert, Matteo Aliverti, David Alves, Manuel Amate, Gerardo Avila, Veronica Baldini , et al. (72 additional authors not shown)

Abstract: Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different d… ▽ More Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different day-night chemistry. While metallic elements and a large temperature contrast have been observed, no chemical gradient has been measured across the surface of such an exoplanet. Different atmospheric chemistry between the day-to-night ("evening") and night-to-day ("morning") terminators could, however, be revealed as an asymmetric absorption signature during transit. Here, we report the detection of an asymmetric atmospheric signature in the ultra-hot exoplanet WASP-76b. We spectrally and temporally resolve this signature thanks to the combination of high-dispersion spectroscopy with a large photon-collecting area. The absorption signal, attributed to neutral iron, is blueshifted by -11+/-0.7 km s-1 on the trailing limb, which can be explained by a combination of planetary rotation and wind blowing from the hot dayside. In contrast, no signal arises from the nightside close to the morning terminator, showing that atomic iron is not absorbing starlight there. Iron must thus condense during its journey across the nightside. △ Less

Submitted 11 March, 2020; originally announced March 2020.

Comments: Published in Nature (Accepted on 24 January 2020.) 33 pages, 11 figures, 3 tables

Son of X--Shooter: a multi--band instrument for a multi--band universe

Authors: R. Claudi, S. Campana, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achren, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco, E. Cappellaro, M. Colapietro, M. Della Valle , et al. (25 additional authors not shown)

Abstract: Son Of X-Shooter (SOXS) will be a new instrument designed to be mounted at the Nasmyth--A focus of the ESO 3.5 m New Technology Telescope in La Silla site (Chile). SOXS is composed of two high-efficiency spectrographs with a resolution slit product 4500, working in the visible (350 -- 850 nm) and NIR (800 -- 2000 nm) range respectively, and a light imager in the visible (the acquisition camera usa… ▽ More Son Of X-Shooter (SOXS) will be a new instrument designed to be mounted at the Nasmyth--A focus of the ESO 3.5 m New Technology Telescope in La Silla site (Chile). SOXS is composed of two high-efficiency spectrographs with a resolution slit product 4500, working in the visible (350 -- 850 nm) and NIR (800 -- 2000 nm) range respectively, and a light imager in the visible (the acquisition camera usable also for scientific purposes). The science case is very broad, it ranges from moving minor bodies in the solar system, to bursting young stellar objects, cataclysmic variables and X-ray binary transients in our Galaxy, supernovae and tidal disruption events in the local Universe, up to gamma-ray bursts in the very distant and young Universe, basically encompassing all distance scales and astronomy branches. At the moment, the instrument passed the Preliminary Design Review by ESO (July 2017) and the Final Design (with FDR in July 2018). △ Less

Submitted 17 December, 2018; originally announced December 2018.

Comments: 23 pages, 10 Figures, accepted to be published in Frontier Research in Astrophysics 2018 Conference proceedings in Proceeding of Science. arXiv admin note: text overlap with arXiv:1807.08828

The mechanical design of SOXS for the NTT

Authors: M Aliverti, O Hershko, O Diner, A Brucallassi, G Pignata, H Kuncarayakti, A Bianco, S Campana, R Claudi, P Schipani, A Baruffolo, S Ben-Ami, F Biondi, G Capasso, R Cosentino, F DAlessio, P DAvanzo, M Munari, A Rubin, S Scuderi, F Vitali, J Achrén, J. A. Araiza-Duran, I Arcavi, E Cappellaro , et al. (23 additional authors not shown)

Abstract: SOXS (Son of X-shooter) is a wide band, medium resolution spectrograph for the ESO NTT with a first light expected in 2021. The instrument will be composed by five semi-independent subsystems: a pre-slit Common Path, an Acquisition Camera, a Calibration Box, the NIR spectrograph, and the UV-VIS spectrograph. In this paper, we present the mechanical design of the subsystems, the kinematic mounts de… ▽ More SOXS (Son of X-shooter) is a wide band, medium resolution spectrograph for the ESO NTT with a first light expected in 2021. The instrument will be composed by five semi-independent subsystems: a pre-slit Common Path, an Acquisition Camera, a Calibration Box, the NIR spectrograph, and the UV-VIS spectrograph. In this paper, we present the mechanical design of the subsystems, the kinematic mounts developed to simplify the final integration procedure and the maintenance. The concept of the CP and NIR optomechanical mounts developed for a simple pre-alignment procedure and for the thermal compensation of reflective and refractive elements will be shown. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Journal ref: Telescope and Astronomical Instrumentation 2018, SPIE Conf

The VIS detector system of SOXS

Authors: Rosario Cosentino, Matteo Aliverti, Salvatore Scuderi, Sergio Campana, Riccardo Claudi, Pietro Schipani, Andrea Baruffolo, Sagi Ben-Ami, L. H. Mehrgan, Derek Ives, Federico Biondi, Anna Brucalassi, Giulio Capasso, Francesco D'Alessio, Paolo D'Avanzo, Oz Diner, Hanindyo Kuncarayakti, Matteo Munari, Adam Rubin, Fabrizio Vitali, Jani Achren, Jose Antonio Araiza-Duran, Iair Arcavi, Andrea Bianco, Enrico Cappellaro , et al. (24 additional authors not shown)

Abstract: SOXS will be a unique spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-1800 nm). In this article, we describe the design of the visible camera cryostat and the architecture of the acquisition system. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled w… ▽ More SOXS will be a unique spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-1800 nm). In this article, we describe the design of the visible camera cryostat and the architecture of the acquisition system. The UV-VIS detector system is based on a e2v CCD 44-82, a custom detector head coupled with the ESO continuous ow cryostats (CFC) cooling system and the NGC CCD controller developed by ESO. This paper outlines the status of the system and describes the design of the different parts that made up the UV-VIS arm and is accompanied by a series of contributions describing the SOXS design solutions. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 13 figures, to be published in SPIE Proceedings 10702

Architecture of the SOXS instrument control software

Authors: Davide Ricci, Andrea Baruffolo, Bernardo Salasnich, Daniela Fantinel, Josefina Urrutia, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Sagi Ben-Ami, Federico Biondi, Anna Brucalassi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Oz Diner, Hanindyo Kuncarayakti, Matteo Munari, Adam Rubin, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran, Iair Arcavi , et al. (23 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a new spectrograph for the ESO NTT telescope, currently in the final design phase. The main instrument goal is to allow the characterization of transient sources based on alerts. It will cover from near-infrared to visible bands with a spectral resolution of $R \sim 4500$ using two separate, wavelength-optimized spectrographs. A visible camera, primarily intended for t… ▽ More SOXS (Son Of X-Shooter) is a new spectrograph for the ESO NTT telescope, currently in the final design phase. The main instrument goal is to allow the characterization of transient sources based on alerts. It will cover from near-infrared to visible bands with a spectral resolution of $R \sim 4500$ using two separate, wavelength-optimized spectrographs. A visible camera, primarily intended for target acquisition and secondary guiding, will also provide a scientific "light" imaging mode. In this paper we present the current status of the design of the SOXS instrument control software, which is in charge of controlling all instrument functions and detectors, coordinating the execution of exposures, and implementing all observation, calibration and maintenance procedures. Given the extensive experience of the SOXS consortium in the development of instruments for the VLT, we decided to base the design of the Control System on the same standards, both for hardware and software control. We illustrate the control network, the instrument functions and detectors to be controlled, the overall design of SOXS Instrument Software (INS) and its main components. Then, we provide details about the control software for the most SOXS-specific features: control of the COTS-based imaging camera, the flexures compensation system and secondary guiding. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 8 pages, 5 figures

Journal ref: Proc. SPIE 10707, Software and Cyberinfrastructure for Astronomy V, 107071G (6 July 2018)

SOXS Control Electronics Design

Authors: G. Capasso, M. Colapietro, S. D'Orsi, P. Schipani, M. Aliverti, H. Kuncarayakti, S. Scuderi, I. Coretti, S. Campana, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, M. Munari, A. Rubin, F. Vitali, J. Achrén, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco , et al. (24 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) is a unique spectroscopic facility that will operate at the ESO New Technology Telescope (NTT) in La Silla from 2020 onward. The spectrograph will be able to cover simultaneously the UV-VIS and NIR bands exploiting two different arms and a Common Path feeding system. We present the design of the SOXS instrument control electronics. The electronics controls all the movements… ▽ More SOXS (Son Of X-Shooter) is a unique spectroscopic facility that will operate at the ESO New Technology Telescope (NTT) in La Silla from 2020 onward. The spectrograph will be able to cover simultaneously the UV-VIS and NIR bands exploiting two different arms and a Common Path feeding system. We present the design of the SOXS instrument control electronics. The electronics controls all the movements, alarms, cabinet temperatures, and electric interlocks of the instrument. We describe the main design concept. We decided to follow the ESO electronic design guidelines to minimize project time and risks and to simplify system maintenance. The design envisages Commercial Off-The-Shelf (COTS) industrial components (e.g. Beckhoff PLC and EtherCAT fieldbus modules) to obtain a modular design and to increase the overall reliability and maintainability. Preassembled industrial motorized stages are adopted allowing for high precision assembly standards and a high reliability. The electronics is kept off-board whenever possible to reduce thermal issues and instrument weight and to increase the accessibility for maintenance purpose. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the work and is part of a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 10 pages, 7 figures, to be publised in SPIE Proceedings 10707-90

The Acquisition Camera System for SOXS at NTT

Authors: A. Brucalassi, A. Araiza-Duran, G. Pignata, S. Campana, R. Claudi, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, D. Gardiol, O. Hershko, H. Kuncarayakti, M. Munari, D. Ricci, M. Riva, A. Rubin, R. Zanmar Sanchez, S. Scuderi, F. Vitali, J. Achrén , et al. (25 additional authors not shown)

Abstract: SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with th… ▽ More SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with the best possible response time in addition to high efficiency and availability. Furthermore, a Calibration Unit and an Acquisition Camera System with all the necessary relay optics will be connected to the Common Path sub-system. The Acquisition Camera, working in optical regime, will be primarily focused on target acquisition and secondary guiding, but will also provide an imaging mode for scientific photometry. In this work we give an overview of the Acquisition Camera System for SOXS with all the different functionalities. The optical and mechanical design of the system are also presented together with the preliminary performances in terms of optical quality, throughput, magnitude limits and photometric properties. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 7 figures, SPIE conference

MITS: the Multi-Imaging Transient Spectrograph for SOXS

Authors: Adam Rubin, Sagi Ben-Ami, Ofir Hershko, Michael Rappaport, Oz Diner, Avishay Gal-Yam, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Federico Biondi, Anna Brucalassi, Giulio Capasso, Rosario Cosentino, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Hanindyo Kuncarayakti, Hanindyo Kuncarayakti, Matteo Munari, Salvatore Scuderi, Fabrizio Vitali, Jani Achrén, José Antonio Araiza-Duran , et al. (25 additional authors not shown)

Abstract: The Son Of X-Shooter (SOXS) is a medium resolution spectrograph R~4500 proposed for the ESO 3.6 m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m=1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element… ▽ More The Son Of X-Shooter (SOXS) is a medium resolution spectrograph R~4500 proposed for the ESO 3.6 m NTT. We present the optical design of the UV-VIS arm of SOXS which employs high efficiency ion-etched gratings used in first order (m=1) as the main dispersers. The spectral band is split into four channels which are directed to individual gratings, and imaged simultaneously by a single three-element catadioptric camera. The expected throughput of our design is >60% including contingency. The SOXS collaboration expects first light in early 2021. This paper is one of several papers presented in these proceedings describing the full SOXS instrument. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Optical design of the SOXS spectrograph for ESO NTT

Authors: Ricardo Zanmar Sanchez, Matteo Munari, Adam Rubin, Sagi Ben-Ami, Anna Brucalassi, Hanindyo Kuncarayakti, Jani Achrén, Sergio Campana, Riccardo Claudi, Pietro Schipani, Matteo Aliverti, Andrea Baruffolo, Federico Biondi, Giulio Capasso, Rosario Cosentino, Francesco D'Alessio, Paolo D'Avanzo, Salvatore Scuderi, Fabrizio Vitali, José Antonio Araiza-Duran, Iair Arcavi, Andrea Bianco, Enrico Cappellaro, Mirko Colapietro, Massimo Della Valle , et al. (23 additional authors not shown)

Abstract: An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 io… ▽ More An overview of the optical design for the SOXS spectrograph is presented. SOXS (Son Of X-Shooter) is the new wideband, medium resolution (R>4500) spectrograph for the ESO 3.58m NTT telescope expected to start observations in 2021 at La Silla. The spectroscopic capabilities of SOXS are assured by two different arms. The UV-VIS (350-850 nm) arm is based on a novel concept that adopts the use of 4 ion-etched high efficiency transmission gratings. The NIR (800- 2000 nm) arm adopts the '4C' design (Collimator Correction of Camera Chromatism) successfully applied in X-Shooter. Other optical sub-systems are the imaging Acquisition Camera, the Calibration Unit and a pre-slit Common Path. We describe the optical design of the five sub-systems and report their performance in terms of spectral format, throughput and optical quality. This work is part of a series of contributions describing the SOXS design and properties as it is about to face the Final Design Review. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 9 pages, 9 figures, published in SPIE Proceedings 10702

Journal ref: Proc. SPIE 10702, 1070227 (2018)

The assembly integration and test activities for the new SOXS instrument at NTT

Authors: F. Biondi, R. Claudi, L. Marafatto, J. Farinato, D. Magrin, R. Ragazzoni, S. Campana, P. Schipani, M. Aliverti, A. Baruffolo, S. Ben-Ami, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. Antonio Araiza-Durán, I. Arcavi , et al. (26 additional authors not shown)

Abstract: Son Of X-Shooter (SOXS) is the new instrument for the ESO 3.5 m New Technology Telescope (NTT) in La Silla site (Chile) devised for the spectroscopic follow-up of transient sources. SOXS is composed by two medium resolution spectrographs able to cover the 350-2000 nm interval. An Acquisition Camera will provide a light imaging capability in the visible band. We present the procedure foreseen for t… ▽ More Son Of X-Shooter (SOXS) is the new instrument for the ESO 3.5 m New Technology Telescope (NTT) in La Silla site (Chile) devised for the spectroscopic follow-up of transient sources. SOXS is composed by two medium resolution spectrographs able to cover the 350-2000 nm interval. An Acquisition Camera will provide a light imaging capability in the visible band. We present the procedure foreseen for the Assembly, Integration and Test activities (AIT) of SOXS that will be carried out at sub-systems level at various consortium partner premises and at system level both in Europe and Chile. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: 10 pages, 9 figures

Journal ref: Proc. SPIE 10702, 107023D (2018)

The NIR Spectrograph for the new SOXS instrument at the NTT

Authors: F. Vitali, M. Aliverti, G. Capasso, F. D'Alessio, M. Munari, M. Riva, S. Scuderi, R. Zanmar Sanchez, S. Campana, P. Schipani, R. Claudi, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, R. Cosentino, D. Ricci, P. D'Avanzo, O. Diner, H. Kuncarayakti, A. Rubin, J. Achrén, J. A. Araiza-Duran, I. Arcavi, A. Bianco , et al. (22 additional authors not shown)

Abstract: We present the NIR spectrograph of the Son Of XShooter (SOXS) instrument for the ESO-NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 μm. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic ech… ▽ More We present the NIR spectrograph of the Son Of XShooter (SOXS) instrument for the ESO-NTT telescope at La Silla (Chile). SOXS is a R~4,500 mean resolution spectrograph, with a simultaneously coverage from about 0.35 to 2.00 μm. It will be mounted at the Nasmyth focus of the NTT. The two UV-VIS-NIR wavelength ranges will be covered by two separated arms. The NIR spectrograph is a fully cryogenic echelle-dispersed spectrograph, working in the range 0.80-2.00 μm, equipped with an Hawaii H2RG IR array from Teledyne, working at 40 K. The spectrograph will be cooled down to about 150 K, to lower the thermal background, and equipped with a thermal filter to block any thermal radiation above 2.0 μm. In this poster we will show the main characteristics of the instrument along with the expected performances at the telescope. △ Less

Submitted 5 September, 2018; originally announced September 2018.

Comments: SPIE Conference, Astronomical Telescopes + Instrumentation

Journal ref: Proc. SPIE 10702, 1070228 (2018)

The Common Path of SOXS (Son of X-Shooter)

Authors: R. Claudi, M. Aliverti, F. Biondi, M. Munari, R. Zanmar R. Sanchez, S. Campana, P. Schipani, A. Baruffolo, S. Ben-Ami, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, H. Kuncarayakti, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. A. Araiza--Duran, I. Arcavi, A. Bianco, E. Cappellaro, M. Colapietro , et al. (22 additional authors not shown)

Abstract: Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ (goal 5000) over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT and the Calibrati… ▽ More Son of X-Shooter (SOXS) will be a high-efficiency spectrograph with a mean Resolution-Slit product of $\sim 4500$ (goal 5000) over the entire band capable of simultaneously observing the complete spectral range 350-2000 nm. It consists of three scientific arms (the UV-VIS Spectrograph, the NIR Spectrograph and the Acquisition Camera) connected by the Common Path system to the NTT and the Calibration Unit. The Common Path is the backbone of the instrument and the interface to the NTT Nasmyth focus flange. The light coming from the focus of the telescope is split by the common path optics into the two different optical paths in order to feed the two spectrographs and the acquisition camera. The instrument project went through the Preliminary Design Review in 2017 and is currently in Final Design Phase (with FDR in July 2018). This paper outlines the status of the Common Path system and is accompanied by a series of contributions describing the SOXS design and properties after the instrument Preliminary Design Review. △ Less

Submitted 9 August, 2018; originally announced August 2018.

Comments: 11 pages, 10 figures, Telescope and Astronomical Instrumentation 2018, SPIE Conf. arXiv admin note: text overlap with arXiv:1807.08828

SOXS: a wide band spectrograph to follow up transients

Authors: P. Schipani, S. Campana, R. Claudi, H. U. Käufl, M. Accardo, M. Aliverti, A. Baruffolo, S. Ben-Ami, F. Biondi, A. Brucalassi, G. Capasso, R. Cosentino, F. D'Alessio, P. D'Avanzo, O. Hershko, D. Gardiol, H. Kuncarayakti, M. Munari, A. Rubin, S. Scuderi, F. Vitali, J. Achrén, J. Antonio Araiza-Duran, I. Arcavi, A. Bianco , et al. (27 additional authors not shown)

Abstract: SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from… ▽ More SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from different surveys. These will be a mixture of fast alerts (e.g. gamma-ray bursts, gravitational waves, neutrino events), mid-term alerts (e.g. supernovae, X-ray transients), fixed time events (e.g. close-by passage of minor bodies). While the focus is on transients and variables, still there is a wide range of other astrophysical targets and science topics that will benefit from SOXS. The design foresees a spectrograph with a Resolution-Slit product ~ 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. The limiting magnitude of R~20 (1 hr at S/N~10) is suited to study transients identified from on-going imaging surveys. Light imaging capabilities in the optical band (grizy) are also envisaged to allow for multi-band photometry of the faintest transients. This paper outlines the status of the project, now in Final Design Phase. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: 12 pages, 14 figures, to be published in SPIE Proceedings 10702