-
A sparse hierarchical $hp$-finite element method on disks and annuli
Authors:
Ioannis P. A. Papadopoulos,
Sheehan Olver
Abstract:
We develop a sparse hierarchical $hp$-finite element method ($hp$-FEM) for the Helmholtz equation with rotationally invariant variable coefficients posed on a two-dimensional disk or annulus. The mesh is an inner disk cell (omitted if on an annulus domain) and concentric annuli cells. The discretization preserves the Fourier mode decoupling of rotationally invariant operators, such as the Laplacia…
▽ More
We develop a sparse hierarchical $hp$-finite element method ($hp$-FEM) for the Helmholtz equation with rotationally invariant variable coefficients posed on a two-dimensional disk or annulus. The mesh is an inner disk cell (omitted if on an annulus domain) and concentric annuli cells. The discretization preserves the Fourier mode decoupling of rotationally invariant operators, such as the Laplacian, which manifests as block diagonal mass and stiffness matrices. Moreover, the matrices have a sparsity pattern independent of the order of the discretization and admit an optimal complexity factorization. The sparse $hp$-FEM can handle radial discontinuities in the right-hand side and in rotationally invariant Helmholtz coefficients. We consider examples such as a high-frequency Helmholtz equation with radial discontinuities, the time-dependent Schrödinger equation, and an extension to a three-dimensional cylinder domain, with a quasi-optimal solve, via the Alternating Direction Implicit (ADI) algorithm.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Quasi-optimal complexity $hp$-FEM for Poisson on a rectangle
Authors:
Kars Knook,
Sheehan Olver,
Ioannis P. A. Papadopoulos
Abstract:
We show, in one dimension, that an $hp$-Finite Element Method ($hp$-FEM) discretisation can be solved in optimal complexity because the discretisation has a special sparsity structure that ensures that the \emph{reverse Cholesky factorisation} -- Cholesky starting from the bottom right instead of the top left -- remains sparse. Moreover, computing and inverting the factorisation almost entirely tr…
▽ More
We show, in one dimension, that an $hp$-Finite Element Method ($hp$-FEM) discretisation can be solved in optimal complexity because the discretisation has a special sparsity structure that ensures that the \emph{reverse Cholesky factorisation} -- Cholesky starting from the bottom right instead of the top left -- remains sparse. Moreover, computing and inverting the factorisation almost entirely trivially parallelises across the different elements. By incorporating this approach into an Alternating Direction Implicit (ADI) method à la Fortunato and Townsend (2020) we can solve, within a prescribed tolerance, an $hp$-FEM discretisation of the (screened) Poisson equation on a rectangle, in parallel, with quasi-optimal complexity: $O(N^2 \log N)$ operations where $N$ is the maximal total degrees of freedom in each dimension. When combined with fast Legendre transforms we can also solve nonlinear time-evolution partial differential equations in a quasi-optimal complexity of $O(N^2 \log^2 N)$ operations, which we demonstrate on the (viscid) Burgers' equation.
△ Less
Submitted 17 February, 2024;
originally announced February 2024.
-
A frame approach for equations involving the fractional Laplacian
Authors:
Ioannis P. A. Papadopoulos,
Timon S. Gutleb,
José A. Carrillo,
Sheehan Olver
Abstract:
Exceptionally elegant formulae exist for the fractional Laplacian operator applied to weighted classical orthogonal polynomials. We utilize these results to construct a solver, based on frame properties, for equations involving the fractional Laplacian of any power, $s \in (0,1)$, on an unbounded domain in one or two dimensions. The numerical method represents solutions in an expansion of weighted…
▽ More
Exceptionally elegant formulae exist for the fractional Laplacian operator applied to weighted classical orthogonal polynomials. We utilize these results to construct a solver, based on frame properties, for equations involving the fractional Laplacian of any power, $s \in (0,1)$, on an unbounded domain in one or two dimensions. The numerical method represents solutions in an expansion of weighted classical orthogonal polynomials as well as their unweighted counterparts with a specific extension to $\mathbb{R}^d$, $d \in \{1,2\}$. We examine the frame properties of this family of functions for the solution expansion and, under standard frame conditions, derive an a priori estimate for the stationary equation. Moreover, we prove one achieves the expected order of convergence when considering an implicit Euler discretization in time for the fractional heat equation. We apply our solver to numerous examples including the fractional heat equation (utilizing up to a $6^\text{th}$-order Runge--Kutta time discretization), a fractional heat equation with a time-dependent exponent $s(t)$, and a two-dimensional problem, observing spectral convergence in the spatial dimension for sufficiently smooth data.
△ Less
Submitted 29 February, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Explicit fractional Laplacians and Riesz potentials of classical functions
Authors:
Timon S. Gutleb,
Ioannis P. A. Papadopoulos
Abstract:
We prove and collect numerous explicit and computable results for the fractional Laplacian $(-Δ)^s f(x)$ with $s>0$ as well as its whole space inverse, the Riesz potential, $(-Δ)^{-s}f(x)$ with $s\in\left(0,\frac{1}{2}\right)$. Choices of $f(x)$ include weighted classical orthogonal polynomials such as the Legendre, Chebyshev, Jacobi, Laguerre and Hermite polynomials, or first and second kind Bess…
▽ More
We prove and collect numerous explicit and computable results for the fractional Laplacian $(-Δ)^s f(x)$ with $s>0$ as well as its whole space inverse, the Riesz potential, $(-Δ)^{-s}f(x)$ with $s\in\left(0,\frac{1}{2}\right)$. Choices of $f(x)$ include weighted classical orthogonal polynomials such as the Legendre, Chebyshev, Jacobi, Laguerre and Hermite polynomials, or first and second kind Bessel functions with or without sinusoid weights. Some higher dimensional fractional Laplacians and Riesz potentials of generalized Zernike polynomials on the unit ball and its complement as well as whole space generalized Laguerre polynomials are also discussed. The aim of this paper is to aid in the continued development of numerical methods for problems involving the fractional Laplacian or the Riesz potential in bounded and unbounded domains -- both directly by providing useful basis or frame functions for spectral method approaches and indirectly by providing accessible ways to construct computable toy problems on which to test new numerical methods.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Building hierarchies of semiclassical Jacobi polynomials for spectral methods in annuli
Authors:
Ioannis P. A. Papadopoulos,
Timon S. Gutleb,
Richard M. Slevinsky,
Sheehan Olver
Abstract:
We discuss computing with hierarchies of families of (potentially weighted) semiclassical Jacobi polynomials which arise in the construction of multivariate orthogonal polynomials. In particular, we outline how to build connection and differentiation matrices with optimal complexity and compute analysis and synthesis operations in quasi-optimal complexity. We investigate a particular application o…
▽ More
We discuss computing with hierarchies of families of (potentially weighted) semiclassical Jacobi polynomials which arise in the construction of multivariate orthogonal polynomials. In particular, we outline how to build connection and differentiation matrices with optimal complexity and compute analysis and synthesis operations in quasi-optimal complexity. We investigate a particular application of these results to constructing orthogonal polynomials in annuli, called the generalised Zernike annular polynomials, which lead to sparse discretisations of partial differential equations. We compare against a scaled-and-shifted Chebyshev--Fourier series showing that in general the annular polynomials converge faster when approximating smooth functions and have better conditioning. We also construct a sparse spectral element method by combining disk and annulus cells, which is highly effective for solving PDEs with radially discontinuous variable coefficients and data.
△ Less
Submitted 10 July, 2024; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Numerical analysis of the SIMP model for the topology optimization problem of minimizing compliance in linear elasticity
Authors:
Ioannis P. A. Papadopoulos
Abstract:
We study the finite element approximation of the solid isotropic material with penalization (SIMP) model for the topology optimization problem of minimizing the compliance of a linearly elastic structure. To ensure the existence of a local minimizer to the infinite-dimensional problem, we consider two popular regularization methods: $W^{1,p}$-type penalty methods and density filtering. Previous re…
▽ More
We study the finite element approximation of the solid isotropic material with penalization (SIMP) model for the topology optimization problem of minimizing the compliance of a linearly elastic structure. To ensure the existence of a local minimizer to the infinite-dimensional problem, we consider two popular regularization methods: $W^{1,p}$-type penalty methods and density filtering. Previous results prove weak(-*) convergence in the space of the material distribution to a local minimizer of the infinite-dimensional problem. Notably, convergence was not guaranteed to \emph{all} the isolated local minimizers. In this work, we show that, for every isolated local or global minimizer, there exists a sequence of finite element local minimizers that strongly converges to the minimizer in the appropriate space. As a by-product, this ensures that there exists a sequence of unfiltered discretized material distributions that does not exhibit checkerboarding.
△ Less
Submitted 16 November, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
A sparse spectral method for fractional differential equations in one-spatial dimension
Authors:
Ioannis P. A. Papadopoulos,
Sheehan Olver
Abstract:
We develop a sparse spectral method for a class of fractional differential equations, posed on $\mathbb{R}$, in one dimension. These equations can include sqrt-Laplacian, Hilbert, derivative and identity terms. The numerical method utilizes a basis consisting of weighted Chebyshev polynomials of the second kind in conjunction with their Hilbert transforms. The former functions are supported on…
▽ More
We develop a sparse spectral method for a class of fractional differential equations, posed on $\mathbb{R}$, in one dimension. These equations can include sqrt-Laplacian, Hilbert, derivative and identity terms. The numerical method utilizes a basis consisting of weighted Chebyshev polynomials of the second kind in conjunction with their Hilbert transforms. The former functions are supported on $[-1,1]$ whereas the latter have global support. The global approximation space can contain different affine transformations of the basis, map** $[-1,1]$ to other intervals. Remarkably, not only are the induced linear systems sparse, but the operator decouples across the different affine transformations. Hence, the solve reduces to solving $K$ independent sparse linear systems of size $\mathcal{O}(n)\times \mathcal{O}(n)$, with $\mathcal{O}(n)$ nonzero entries, where $K$ is the number of different intervals and $n$ is the highest polynomial degree contained in the sum space. This results in an $\mathcal{O}(n)$ complexity solve. Applications to fractional heat and wave equations are considered.
△ Less
Submitted 11 June, 2024; v1 submitted 15 October, 2022;
originally announced October 2022.
-
Multimodal Quasi-AutoRegression: Forecasting the visual popularity of new fashion products
Authors:
Stefanos I. Papadopoulos,
Christos Koutlis,
Symeon Papadopoulos,
Ioannis Kompatsiaris
Abstract:
Estimating the preferences of consumers is of utmost importance for the fashion industry as appropriately leveraging this information can be beneficial in terms of profit. Trend detection in fashion is a challenging task due to the fast pace of change in the fashion industry. Moreover, forecasting the visual popularity of new garment designs is even more demanding due to lack of historical data. T…
▽ More
Estimating the preferences of consumers is of utmost importance for the fashion industry as appropriately leveraging this information can be beneficial in terms of profit. Trend detection in fashion is a challenging task due to the fast pace of change in the fashion industry. Moreover, forecasting the visual popularity of new garment designs is even more demanding due to lack of historical data. To this end, we propose MuQAR, a Multimodal Quasi-AutoRegressive deep learning architecture that combines two modules: (1) a multi-modal multi-layer perceptron processing categorical, visual and textual features of the product and (2) a quasi-autoregressive neural network modelling the "target" time series of the product's attributes along with the "exogenous" time series of all other attributes. We utilize computer vision, image classification and image captioning, for automatically extracting visual features and textual descriptions from the images of new products. Product design in fashion is initially expressed visually and these features represent the products' unique characteristics without interfering with the creative process of its designers by requiring additional inputs (e.g manually written texts). We employ the product's target attributes time series as a proxy of temporal popularity patterns, mitigating the lack of historical data, while exogenous time series help capture trends among interrelated attributes. We perform an extensive ablation analysis on two large scale image fashion datasets, Mallzee and SHIFT15m to assess the adequacy of MuQAR and also use the Amazon Reviews: Home and Kitchen dataset to assess generalisability to other domains. A comparative study on the VISUELLE dataset, shows that MuQAR is capable of competing and surpassing the domain's current state of the art by 4.65% and 4.8% in terms of WAPE and MAE respectively.
△ Less
Submitted 5 May, 2022; v1 submitted 8 April, 2022;
originally announced April 2022.
-
Preconditioners for computing multiple solutions in three-dimensional fluid topology optimization
Authors:
Ioannis P. A. Papadopoulos,
Patrick E. Farrell
Abstract:
Topology optimization problems generally support multiple local minima, and real-world applications are typically three-dimensional. In previous work [I. P. A. Papadopoulos, P. E. Farrell, and T. M. Surowiec, Computing multiple solutions of topology optimization problems, SIAM Journal on Scientific Computing, (2021)], the authors developed the deflated barrier method, an algorithm that can systema…
▽ More
Topology optimization problems generally support multiple local minima, and real-world applications are typically three-dimensional. In previous work [I. P. A. Papadopoulos, P. E. Farrell, and T. M. Surowiec, Computing multiple solutions of topology optimization problems, SIAM Journal on Scientific Computing, (2021)], the authors developed the deflated barrier method, an algorithm that can systematically compute multiple solutions of topology optimization problems. In this work we develop preconditioners for the linear systems arising in the application of this method to Stokes flow, making it practical for use in three dimensions. In particular, we develop a nested block preconditioning approach which reduces the linear systems to solving two symmetric positive-definite matrices and an augmented momentum block. An augmented Lagrangian term is used to control the innermost Schur complement and we apply a geometric multigrid method with a kernel-capturing relaxation method for the augmented momentum block. We present multiple solutions in three-dimensional examples computed using the proposed iterative solver.
△ Less
Submitted 22 November, 2022; v1 submitted 16 February, 2022;
originally announced February 2022.
-
Numerical analysis of a discontinuous Galerkin method for the Borrvall-Petersson topology optimization problem
Authors:
Ioannis P. A. Papadopoulos
Abstract:
Divergence-free discontinuous Galerkin (DG) finite element methods offer a suitable discretization for the pointwise divergence-free numerical solution of Borrvall and Petersson's model for the topology optimization of fluids in Stokes flow [Topology optimization of fluids in Stokes flow, International Journal for Numerical Methods in Fluids 41 (1) (2003) 77--107]. The convergence results currentl…
▽ More
Divergence-free discontinuous Galerkin (DG) finite element methods offer a suitable discretization for the pointwise divergence-free numerical solution of Borrvall and Petersson's model for the topology optimization of fluids in Stokes flow [Topology optimization of fluids in Stokes flow, International Journal for Numerical Methods in Fluids 41 (1) (2003) 77--107]. The convergence results currently found in literature only consider H^1-conforming discretizations for the velocity. In this work, we extend the numerical analysis of Papadopoulos and Suli to divergence-free DG methods with an interior penalty [I. P. A. Papadopoulos and E. Suli, Numerical analysis of a topology optimization problem for Stokes flow, arXiv preprint arXiv:2102.10408, (2021)]. We show that, given an isolated minimizer of the infinite-dimensional problem, there exists a sequence of DG finite element solutions, satisfying necessary first-order optimality conditions, that strongly converges to the minimizer.
△ Less
Submitted 20 February, 2022; v1 submitted 9 August, 2021;
originally announced August 2021.
-
Pulmonary embolism identification in computerized tomography pulmonary angiography scans with deep learning technologies in COVID-19 patients
Authors:
Chairi Kiourt,
Georgios Feretzakis,
Konstantinos Dalamarinis,
Dimitris Kalles,
Georgios Pantos,
Ioannis Papadopoulos,
Spyros Kouris,
George Ioannakis,
Evangelos Loupelis,
Petros Antonopoulos,
Aikaterini Sakagianni
Abstract:
The main objective of this work is to utilize state-of-the-art deep learning approaches for the identification of pulmonary embolism in CTPA-Scans for COVID-19 patients, provide an initial assessment of their performance and, ultimately, provide a fast-track prototype solution (system). We adopted and assessed some of the most popular convolutional neural network architectures through transfer lea…
▽ More
The main objective of this work is to utilize state-of-the-art deep learning approaches for the identification of pulmonary embolism in CTPA-Scans for COVID-19 patients, provide an initial assessment of their performance and, ultimately, provide a fast-track prototype solution (system). We adopted and assessed some of the most popular convolutional neural network architectures through transfer learning approaches, to strive to combine good model accuracy with fast training. Additionally, we exploited one of the most popular one-stage object detection models for the localization (through object detection) of the pulmonary embolism regions-of-interests. The models of both approaches are trained on an original CTPA-Scan dataset, where we annotated of 673 CTPA-Scan images with 1,465 bounding boxes in total, highlighting pulmonary embolism regions-of-interests. We provide a brief assessment of some state-of-the-art image classification models by achieving validation accuracies of 91% in pulmonary embolism classification. Additionally, we achieved a precision of about 68% on average in the object detection model for the pulmonary embolism localization under 50% IoU threshold. For both approaches, we provide the entire training pipelines for future studies (step by step processes through source code). In this study, we present some of the most accurate and fast deep learning models for pulmonary embolism identification in CTPA-Scans images, through classification and localization (object detection) approaches for patients infected by COVID-19. We provide a fast-track solution (system) for the research community of the area, which combines both classification and object detection models for improving the precision of identifying pulmonary embolisms.
△ Less
Submitted 28 May, 2021; v1 submitted 24 May, 2021;
originally announced May 2021.
-
Numerical analysis of a topology optimization problem for Stokes flow
Authors:
Ioannis P. A. Papadopoulos,
Endre Süli
Abstract:
T. Borrvall and J. Petersson [Topology optimization of fluids in Stokes flow, International Journal for Numerical Methods in Fluids 41 (1) (2003) 77--107] developed the first model for topology optimization of fluids in Stokes flow. They proved the existence of minimizers in the infinite-dimensional setting and showed that a suitably chosen finite element method will converge in a weak(-*) sense t…
▽ More
T. Borrvall and J. Petersson [Topology optimization of fluids in Stokes flow, International Journal for Numerical Methods in Fluids 41 (1) (2003) 77--107] developed the first model for topology optimization of fluids in Stokes flow. They proved the existence of minimizers in the infinite-dimensional setting and showed that a suitably chosen finite element method will converge in a weak(-*) sense to an unspecified solution. In this work, we prove novel regularity results and extend their numerical analysis. In particular, given an isolated local minimizer to the infinite-dimensional problem, we show that there exists a sequence of finite element solutions, satisfying necessary first-order optimality conditions, that strongly converges to it. We also provide the first numerical investigation into convergence rates.
△ Less
Submitted 13 April, 2022; v1 submitted 20 February, 2021;
originally announced February 2021.
-
Computing multiple solutions of topology optimization problems
Authors:
Ioannis P. A. Papadopoulos,
Patrick E. Farrell,
Thomas M. Surowiec
Abstract:
Topology optimization problems often support multiple local minima due to a lack of convexity. Typically, gradient-based techniques combined with continuation in model parameters are used to promote convergence to more optimal solutions; however, these methods can fail even in the simplest cases. In this paper, we present an algorithm to perform a systematic exploratory search for the solutions of…
▽ More
Topology optimization problems often support multiple local minima due to a lack of convexity. Typically, gradient-based techniques combined with continuation in model parameters are used to promote convergence to more optimal solutions; however, these methods can fail even in the simplest cases. In this paper, we present an algorithm to perform a systematic exploratory search for the solutions of the optimization problem via second-order methods without a good initial guess. The algorithm combines the techniques of deflation, barrier methods and primal-dual active set solvers in a novel way. We demonstrate this approach on several numerical examples, observe mesh-independence in certain cases and show that multiple distinct local minima can be recovered.
△ Less
Submitted 12 January, 2021; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Comparison of R1 Map** Protocols: What are we measuring?
Authors:
Christopher Jenkins,
Ioannis Papadopoulos,
S. M. Shermer
Abstract:
Purpose: Recent work highlights the breadth of reported spin-lattice relaxation rates ($R_1$) for individual tissues. One potential source of variation is the protocol used to determine $R_1$. The methodological dependence of R1 and relaxivity $r_1$ are investigated.
Methods: $R_1$ is quantified in gel phantoms with varying concentration of MnCl2, and a small cohort of three healthy volunteers u…
▽ More
Purpose: Recent work highlights the breadth of reported spin-lattice relaxation rates ($R_1$) for individual tissues. One potential source of variation is the protocol used to determine $R_1$. The methodological dependence of R1 and relaxivity $r_1$ are investigated.
Methods: $R_1$ is quantified in gel phantoms with varying concentration of MnCl2, and a small cohort of three healthy volunteers using different acquisition methods. Siemens inversion recovery (IR) and saturation recovery (SR) protocols are applied to phantoms and volunteers. Variable flip angle (VFA) protocols are additionally applied to phantoms. $R_1$ is quantified using single voxel fits, and distributions examined for regions in the thalamus, and cerebellum as well as grey and white matter. Phantoms exclude boundary fits and relaxivity is quantified across the full concentration range. Normality of $R_1$ distributions is assessed by Kolmogorov-Smirnov score, and inter-sequence agreement by two-sample t-test.
Results: Phantom relaxivity is found to be 7.16 Hz/mM, 9.22 Hz/mM and 10.65 Hz/mM to 11.91 Hz/mM for IR, SR and VFA methods, respectively. In vivo $R_1$ exhibit low intra-participant variation for IR. SR $R_1$ are lower than IR values with inter- and intra-participant variation on the same order. Brain regions and phantoms mapped with different protocols varied significantly with t-test p-values between 0 and 5E-10.
Conclusion: Results suggest a significant protocol dependence of $R_1$, and corresponding relaxivity, suggesting inter-method comparisons should be attempted tentatively, if at all.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Caring robots are here to help
Authors:
Irena Papadopoulos,
Antonio Sgorbissa,
Christina Koulouglioti
Abstract:
Robots, along with sensors and telemedicine, have been identified as technologies that can assist and prolong independent living for older people, with robots especially being used to help prevent social isolation and depression.
Robots, along with sensors and telemedicine, have been identified as technologies that can assist and prolong independent living for older people, with robots especially being used to help prevent social isolation and depression.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Paving the Way for Culturally Competent Robots: a Position Paper
Authors:
Barbara Bruno,
Nak Young Chong,
Hiroko Kamide,
Sanjeev Kanoria,
Jaeryoung Lee,
Yuto Lim,
Amit Kumar Pandey,
Chris Papadopoulos,
Irena Papadopoulos,
Federico Pecora,
Alessandro Saffiotti,
Antonio Sgorbissa
Abstract:
Cultural competence is a well known requirement for an effective healthcare, widely investigated in the nursing literature. We claim that personal assistive robots should likewise be culturally competent, aware of general cultural characteristics and of the different forms they take in different individuals, and sensitive to cultural differences while perceiving, reasoning, and acting. Drawing ins…
▽ More
Cultural competence is a well known requirement for an effective healthcare, widely investigated in the nursing literature. We claim that personal assistive robots should likewise be culturally competent, aware of general cultural characteristics and of the different forms they take in different individuals, and sensitive to cultural differences while perceiving, reasoning, and acting. Drawing inspiration from existing guidelines for culturally competent healthcare and the state-of-the-art in culturally competent robotics, we identify the key robot capabilities which enable culturally competent behaviours and discuss methodologies for their development and evaluation.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Evaluation of Diffusion Weighted Imaging in the Context of Multi-Parametric MRI of the Prostate in the assessment of suspected low volume prostatic carcinoma
Authors:
Ioannis Papadopoulos,
Jonathan Phillips,
Rhodri Evans,
Neil Fenn,
Sophie Schermer
Abstract:
Data from a multi-parametric MRI study of patients with possible early-stage prostate cancer was assessed with a view to creating an efficient clinical protocol. Based on a correlation analysis suggesting that diffusion-weighted imaging (DWI) scores are more strongly correlated with overall PIRADS scores than other modalities such as dynamic contrast enhanced imaging or spectroscopy, we investigat…
▽ More
Data from a multi-parametric MRI study of patients with possible early-stage prostate cancer was assessed with a view to creating an efficient clinical protocol. Based on a correlation analysis suggesting that diffusion-weighted imaging (DWI) scores are more strongly correlated with overall PIRADS scores than other modalities such as dynamic contrast enhanced imaging or spectroscopy, we investigate the combination of T2-weighted imaging (T2w) and DWI as a potential diagnostic tool for prostate cancer detection, staging and guided biopsies. Quantification of the noise floor in the DWI images and careful fitting of the data suggests that the mono-exponential model provides a very good fit to the data and there is no evidence of non-Gaussian diffusion for $b$-values up to 1000 s/mm$^2$. This precludes the use of kurtosis or other non-Gaussian measures as a biomarker for prostate cancer in our case. However, the ADC scores for healthy and probably malignant regions are significantly lower for the latter in all 20 but one patient. The results suggest that a simplified mp-MRI protocol combining T2w and DWI may be a good compromise for a cost and time efficient, early-stage prostate cancer diagnostic programme, combining robust MR biomarkers for prostate cancer that can be reliably quantified and appear well-suited for general clinical practice.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
Kilohertz binary phase modulator for pulsed laser sources using a digital micromirror device
Authors:
Maximilian Hoffmann,
Ioannis N. Papadopoulos,
Benjamin Judkewitz
Abstract:
The controlled modulation of an optical wavefront is required for aberration correction, digital phase conjugation or patterned photostimulation. For most of these applications it is desirable to control the wavefront modulation at the highest rates possible. The digital micromirror device (DMD) presents a cost-effective solution to achieve high-speed modulation and often exceeds the speed of the…
▽ More
The controlled modulation of an optical wavefront is required for aberration correction, digital phase conjugation or patterned photostimulation. For most of these applications it is desirable to control the wavefront modulation at the highest rates possible. The digital micromirror device (DMD) presents a cost-effective solution to achieve high-speed modulation and often exceeds the speed of the more conventional liquid crystal spatial light modulator, but is inherently an amplitude modulator. Furthermore, spatial dispersion caused by DMD diffraction complicates its use with pulsed laser sources, such as those used in nonlinear microscopy. Here we introduce a DMD-based optical design that overcomes these limitations and achieves dispersion-free high-speed binary phase modulation. We show that this phase modulation can be used to switch through binary phase patterns at the rate of 20 kHz in two-photon excitation fluorescence applications.
△ Less
Submitted 8 January, 2018; v1 submitted 17 October, 2017;
originally announced October 2017.
-
The CARESSES EU-Japan project: making assistive robots culturally competent
Authors:
Barbara Bruno,
Nak Young Chong,
Hiroko Kamide,
Sanjeev Kanoria,
Jaeryoung Lee,
Yuto Lim,
Amit Kumar Pandey,
Chris Papadopoulos,
Irena Papadopoulos,
Federico Pecora,
Alessandro Saffiotti,
Antonio Sgorbissa
Abstract:
The nursing literature shows that cultural competence is an important requirement for effective healthcare. We claim that personal assistive robots should likewise be culturally competent, that is, they should be aware of general cultural characteristics and of the different forms they take in different individuals, and take these into account while perceiving, reasoning, and acting. The CARESSES…
▽ More
The nursing literature shows that cultural competence is an important requirement for effective healthcare. We claim that personal assistive robots should likewise be culturally competent, that is, they should be aware of general cultural characteristics and of the different forms they take in different individuals, and take these into account while perceiving, reasoning, and acting. The CARESSES project is an Europe-Japan collaborative effort that aims at designing, develo** and evaluating culturally competent assistive robots. These robots will be able to adapt the way they behave, speak and interact to the cultural identity of the person they assist. This paper describes the approach taken in the CARESSES project, its initial steps, and its future plans.
△ Less
Submitted 21 August, 2017;
originally announced August 2017.
-
Scattering correlations of time-gated light
Authors:
Mykola Kadobianskyi,
Ioannis N. Papadopoulos,
Thomas Chaigne,
Roarke Horstmeyer,
Benjamin Judkewitz
Abstract:
Manipulating the propagation of light through scattering media remains a major challenge for many applications, including astronomy, biomedical imaging and colloidal optics. Wavefront sha** is one of the most promising ways to mitigate scattering and focus through inhomogeneous samples. However, wavefront correction remains accurate over only a limited spatial extent within the scattering medium…
▽ More
Manipulating the propagation of light through scattering media remains a major challenge for many applications, including astronomy, biomedical imaging and colloidal optics. Wavefront sha** is one of the most promising ways to mitigate scattering and focus through inhomogeneous samples. However, wavefront correction remains accurate over only a limited spatial extent within the scattering medium - a correlation range referred to as the optical memory effect. Here, by selecting only the weakly scattered light for wavefront sha**, we show that the addition of temporal degrees of freedom enhances this correlation range. We investigate spatial scattering correlations by digitally time-gating the early arriving light in the spectral domain. We demonstrate that the range of the translational memory effect for the early arriving light is increased almost fourfold, paving the way for a range of scattering media imaging applications.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
The generalized optical memory effect
Authors:
Gerwin Osnabrugge,
Roarke Horstmeyer,
Ioannis N. Papadopoulos,
Benjamin Judkewitz,
Ivo M. Vellekoop
Abstract:
The optical memory effect is a well-known type of wave correlation that is observed in coherent fields that scatter through thin and diffusive materials, like biological tissue. It is a fundamental physical property of scattering media that can be harnessed for deep-tissue microscopy or 'through-the-wall' imaging applications. Here we show that the optical memory effect is a special case of a far…
▽ More
The optical memory effect is a well-known type of wave correlation that is observed in coherent fields that scatter through thin and diffusive materials, like biological tissue. It is a fundamental physical property of scattering media that can be harnessed for deep-tissue microscopy or 'through-the-wall' imaging applications. Here we show that the optical memory effect is a special case of a far more general class of wave correlation. Our new theoretical framework explains how waves remain correlated over both space and angle when they are jointly shifted and tilted inside scattering media of arbitrary geometry. We experimentally demonstrate the existence of such coupled correlations and describe how they can be used to optimize the scanning range in adaptive optics microscopes.
△ Less
Submitted 3 May, 2017;
originally announced May 2017.
-
Isotropic inverse-problem approach for two-dimensional phase unwrap**
Authors:
Ulugbek S. Kamilov,
Ioannis N. Papadopoulos,
Morteza H. Shoreh,
Demetri Psaltis,
Michael Unser
Abstract:
In this paper, we propose a new technique for two-dimensional phase unwrap**. The unwrapped phase is found as the solution of an inverse problem that consists in the minimization of an energy functional. The latter includes a weighted data-fidelity term that favors sparsity in the error between the true and wrapped phase differences, as well as a regularizer based on higher-order total-variation…
▽ More
In this paper, we propose a new technique for two-dimensional phase unwrap**. The unwrapped phase is found as the solution of an inverse problem that consists in the minimization of an energy functional. The latter includes a weighted data-fidelity term that favors sparsity in the error between the true and wrapped phase differences, as well as a regularizer based on higher-order total-variation. One desirable feature of our method is its rotation invariance, which allows it to unwrap a much larger class of images compared to the state of the art. We demonstrate the effectiveness of our method through several experiments on simulated and real data obtained through the tomographic phase microscope. The proposed method can enhance the applicability and outreach of techniques that rely on quantitative phase evaluation.
△ Less
Submitted 16 March, 2015;
originally announced March 2015.
-
Digital confocal microscopy through a multimode fiber
Authors:
Damien Loterie,
Salma Farahi,
Ioannis Papadopoulos,
Alexandre Goy,
Demetri Psaltis,
Christophe Moser
Abstract:
Acquiring high-contrast optical images deep inside biological tissues is still a challenging problem. Confocal microscopy is an important tool for biomedical imaging since it improves image quality by rejecting background signals. However, it suffers from low sensitivity in deep tissues due to light scattering. Recently, multimode fibers have provided a new paradigm for minimally invasive endoscop…
▽ More
Acquiring high-contrast optical images deep inside biological tissues is still a challenging problem. Confocal microscopy is an important tool for biomedical imaging since it improves image quality by rejecting background signals. However, it suffers from low sensitivity in deep tissues due to light scattering. Recently, multimode fibers have provided a new paradigm for minimally invasive endoscopic imaging by controlling light propagation through them. Here we introduce a combined imaging technique where confocal images are acquired through a multimode fiber. We achieve this by digitally engineering the excitation wavefront and then applying a virtual digital pinhole on the collected signal. In this way, we are able to acquire images through the fiber with significantly increased contrast. With a fiber of numerical aperture 0.22, we achieve a lateral resolution of 1.5um, and an axial resolution of 12.7um. The point-scanning rate is currently limited by our spatial light modulator (20Hz).
△ Less
Submitted 15 September, 2015; v1 submitted 14 February, 2015;
originally announced February 2015.
-
A Learning Approach to Optical Tomography
Authors:
Morteza H. Shoreh,
Ulugbek S. Kamilov,
Ioannis N. Papadopoulos,
Alexandre Goy,
Cedric Vonesch,
Michael Unser,
Demetri Psaltis
Abstract:
We describe a method for imaging 3D objects in a tomographic configuration implemented by training an artificial neural network to reproduce the complex amplitude of the experimentally measured scattered light. The network is designed such that the voxel values of the refractive index of the 3D object are the variables that are adapted during the training process. We demonstrate the method experim…
▽ More
We describe a method for imaging 3D objects in a tomographic configuration implemented by training an artificial neural network to reproduce the complex amplitude of the experimentally measured scattered light. The network is designed such that the voxel values of the refractive index of the 3D object are the variables that are adapted during the training process. We demonstrate the method experimentally by forming images of the 3D refractive index distribution of cells.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Translation correlations in anisotropically scattering media
Authors:
Benjamin Judkewitz,
Roarke Horstmeyer,
Ivo M. Vellekoop,
Ioannis N. Papadopoulos,
Changhuei Yang
Abstract:
Controlling light propagation across scattering media by wavefront sha** holds great promise for a wide range of communications and imaging applications. However, finding the right wavefront to shape is a challenge when the map** between input and output scattered wavefronts (i.e. the transmission matrix) is not known. Correlations in transmission matrices, especially the so-called memory-effe…
▽ More
Controlling light propagation across scattering media by wavefront sha** holds great promise for a wide range of communications and imaging applications. However, finding the right wavefront to shape is a challenge when the map** between input and output scattered wavefronts (i.e. the transmission matrix) is not known. Correlations in transmission matrices, especially the so-called memory-effect, have been exploited to address this limitation. However, the traditional memory-effect applies to thin scattering layers at a distance from the target, which precludes its use within thick scattering media, such as fog and biological tissue. Here, we theoretically predict and experimentally verify new transmission matrix correlations within thick anisotropically scattering media, with important implications for biomedical imaging and adaptive optics.
△ Less
Submitted 9 June, 2015; v1 submitted 26 November, 2014;
originally announced November 2014.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Delivery of focused short pulses through a multimode fiber
Authors:
Edgar Emilio Morales Delgado,
Salma Farahi,
Ioannis N. Papadopoulos,
Demetri Psaltis,
Christophe Moser
Abstract:
Light propagation through multimode fibers suffers from spatial distortions that lead to a scrambled intensity profile. In previous work, the correction of such distortions using various wavefront control methods has been demonstrated in the continuous wave case. However, in the ultra-fast pulse regime, modal dispersion temporally broadens a pulse after propagation. Here, we present a method that…
▽ More
Light propagation through multimode fibers suffers from spatial distortions that lead to a scrambled intensity profile. In previous work, the correction of such distortions using various wavefront control methods has been demonstrated in the continuous wave case. However, in the ultra-fast pulse regime, modal dispersion temporally broadens a pulse after propagation. Here, we present a method that compensates for spatial distortions and mitigates temporal broadening due to modal dispersion by a selective phase conjugation process in which only modes of similar group velocities are excited. The selectively excited modes are forced to follow certain paths through the multimode fiber and interfere constructively at the distal tip to form a focused spot with minimal temporal broadening. We demonstrate the delivery of focused 500 fs pulses through a 30 cm long step-index multimode fiber. The achieved pulse duration corresponds to approximately 1/30th of the duration obtained if modal dispersion was not controlled. Moreover, we measured a detailed two-dimensional map of the pulse duration at the output of the fiber and confirmed that the focused spot produces a two-photon absorption effect. This work opens new possibilities for ultra-thin multiphoton imaging through multimode fibers.
△ Less
Submitted 1 March, 2015; v1 submitted 16 July, 2014;
originally announced July 2014.
-
Increasing the imaging capabilities of multimode fibers by exploiting the properties of highly scattering media
Authors:
Ioannis N. Papadopoulos,
Salma Farahi,
Christophe Moser,
Demetri Psaltis
Abstract:
We present a novel design that exploits the focusing properties of scattering media to increase the resolution and the working distance of multimode fiber based imaging devices. Placing a highly scattering medium in front of the distal tip of the multimode fiber enables the formation of smaller sized foci at increased working distances away from the fiber tip. We perform a parametric study of the…
▽ More
We present a novel design that exploits the focusing properties of scattering media to increase the resolution and the working distance of multimode fiber based imaging devices. Placing a highly scattering medium in front of the distal tip of the multimode fiber enables the formation of smaller sized foci at increased working distances away from the fiber tip. We perform a parametric study of the effect of the working distance and the separation between the fiber and the scattering medium on the focus size. We experimentally demonstrate submicron focused spots as far away as 800μm with 532nm light.
△ Less
Submitted 6 June, 2013;
originally announced June 2013.
-
Optical-resolution photoacoustic microscopy by use of a multimode fiber
Authors:
Ioannis N. Papadopoulos,
Olivier Simandoux,
Salma Farahi,
Jean Pierre Huignard,
Emmanuel Bossy,
Demetri Psaltis,
Christophe Moser
Abstract:
We demonstrate Optical-Resolution Photoacoustic Microscopy (OR-PAM), where the optical field is focused and scanned using Digital Phase Conjugation (DPC) through a multimode fiber. The focus is scanned across the field of view using digital means, and the acoustic signal induced is collected by a transducer. Optical-resolution photoacoustic images of a knot made by two absorptive wires are obtaine…
▽ More
We demonstrate Optical-Resolution Photoacoustic Microscopy (OR-PAM), where the optical field is focused and scanned using Digital Phase Conjugation (DPC) through a multimode fiber. The focus is scanned across the field of view using digital means, and the acoustic signal induced is collected by a transducer. Optical-resolution photoacoustic images of a knot made by two absorptive wires are obtained and we report on resolution smaller than 1.5μm across a 201μm by 201μm field of view. The use of a multimode optical fiber for the optical excitation part can pave the way for miniature endoscopes that can provide optical-resolution photoacoustic images at large optical depth.
△ Less
Submitted 18 April, 2013;
originally announced April 2013.
-
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
Authors:
The CMS Electromagnetic Calorimeter Group,
P. Adzic,
N. Almeida,
D. Andelin,
I. Anicin,
Z. Antunovic,
R. Arcidiacono,
M. W. Arenton,
E. Auffray,
S. Argiro,
A. Askew,
S. Baccaro,
S. Baffioni,
M. Balazs,
D. Bandurin,
D. Barney,
L. M. Barone,
A. Bartoloni,
C. Baty,
S. Beauceron,
K. W. Bell,
C. Bernet,
M. Besancon,
B. Betev,
R. Beuselinck
, et al. (245 additional authors not shown)
Abstract:
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews t…
▽ More
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.
-
Comparison of large-angle production of charged pions with incident protons on cylindrical long and short targets
Authors:
The HARP Collaboration,
M. Apollonio,
A. Artamonov,
A. Bagulya,
G. Barr,
A. Blondel,
F. Bobisut,
M. Bogomilov,
M. Bonesini,
C. Booth,
S. Borghi,
S. Bunyatov,
J. Burguet-Castell,
M. G. Catanesi,
A. Cervera-Villanueva,
P. Chimenti,
L. Coney,
E. Di Capua,
U. Dore,
J. Dumarchez,
R. Edgecock,
M. Ellis,
F. Ferri,
U. Gastaldi,
S. Giani
, et al. (49 additional authors not shown)
Abstract:
The HARP collaboration has presented measurements of the double-differential pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this paper the analysis of data taken with long (one interaction length) solid…
▽ More
The HARP collaboration has presented measurements of the double-differential pi+/pi- production cross-section in the range of momentum 100 MeV/c <= p 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad with proton beams hitting thin nuclear targets. In many applications the extrapolation to long targets is necessary. In this paper the analysis of data taken with long (one interaction length) solid cylindrical targets made of carbon, tantalum and lead is presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN PS. The secondary pions were produced by beams of protons with momenta 5 GeV/c, 8 GeV/c and 12 GeV/c. The tracking and identification of the produced particles were performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident protons were identified by an elaborate system of beam detectors. Results are obtained for the double-differential yields per target nucleon d2 sigma / dp dtheta. The measurements are compared with predictions of the MARS and GEANT4 Monte Carlo simulations.
△ Less
Submitted 23 December, 2009; v1 submitted 2 September, 2009;
originally announced September 2009.
-
Large-angle production of charged pions with incident pion beams on nuclear targets
Authors:
The HARP Collaboration,
M. Apollonio,
A. Artamonov,
A. Bagulya,
G. Barr,
A. Blondel,
F. Bobisut,
M. Bogomilov,
M. Bonesini,
C. Booth,
S. Borghi,
S. Bunyatov,
J. Burguet-Castell,
M. G. Catanesi,
A. Cervera-Villanueva,
P. Chimenti,
L. Coney,
E. Di Capua,
U. Dore,
J. Dumarchez,
R. Edgecock,
M. Ellis,
F. Ferri,
U. Gastaldi,
S. Giani
, et al. (49 additional authors not shown)
Abstract:
Measurements of the double-differential pi+/- production cross-section in the range of momentum 100 MeV/c <= p <= 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad using pi+/- beams incident on beryllium, aluminium, carbon, copper, tin, tantalum and lead targets are presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN Proton Synchrotron. The seco…
▽ More
Measurements of the double-differential pi+/- production cross-section in the range of momentum 100 MeV/c <= p <= 800 MeV/c and angle 0.35 rad <= theta <= 2.15 rad using pi+/- beams incident on beryllium, aluminium, carbon, copper, tin, tantalum and lead targets are presented. The data were taken with the large acceptance HARP detector in the T9 beam line of the CERN Proton Synchrotron. The secondary pions were produced by beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a solid target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d2sigma/dpdtheta at six incident beam momenta. Data at 3 GeV/c, 5 GeV/c, 8 GeV/c, and 12 GeV/c are available for all targets while additional data at 8.9 GeV/c and 12.9 GeV/c were taken in positive particle beams on Be and Al targets, respectively. The measurements are compared with several generators of GEANT4 and the MARS Monte Carlo simulation.
△ Less
Submitted 1 January, 2010; v1 submitted 9 July, 2009;
originally announced July 2009.
-
Bose-Einstein condensates with attractive 1/r interaction: The case of self-trap**
Authors:
I. Papadopoulos,
P. Wagner,
G. Wunner,
J. Main
Abstract:
Amplifying on a proposal by O'Dell et al. for the realization of Bose-Einstein condensates of neutral atoms with attractive $1/r$ interaction, we point out that the instance of self-trap** of the condensate, without external trap potential, is physically best understood by introducing appropriate "atomic" units. This reveals a remarkable scaling property: the physics of the condensate depends…
▽ More
Amplifying on a proposal by O'Dell et al. for the realization of Bose-Einstein condensates of neutral atoms with attractive $1/r$ interaction, we point out that the instance of self-trap** of the condensate, without external trap potential, is physically best understood by introducing appropriate "atomic" units. This reveals a remarkable scaling property: the physics of the condensate depends only on the two parameters $N^2 a/a_u$ and $γ/N^2$, where $N$ is the particle number, $a$ the scattering length, $a_u$ the "Bohr" radius and $γ$ the trap frequency in atomic units. We calculate accurate numerical results for self-trap** wave functions and potentials, for energies, sizes and peak densities, and compare with previous variational results. As a novel feature we point out the existence of a second solution of the extended Gross-Pitaevskii equation for negative scattering lengths, with and without trap** potential, which is born together with the ground state in a tangent bifurcation. This indicates the existence of an unstable collectively excited state of the condensate for negative scattering lengths.
△ Less
Submitted 18 September, 2007;
originally announced September 2007.
-
The POOL Data Storage, Cache and Conversion Mechanism
Authors:
D. Dullmann,
M. Frank,
G. Govi,
I. Papadopoulos,
S. Roiser
Abstract:
The POOL data storage mechanism is intended to satisfy the needs of the LHC experiments to store and analyze the data from the detector response of particle collisions at the LHC proton-proton collider. Both the data rate and the data volumes will largely differ from the past experience. The POOL data storage mechanism is intended to be able to cope with the experiment's requirements applying a…
▽ More
The POOL data storage mechanism is intended to satisfy the needs of the LHC experiments to store and analyze the data from the detector response of particle collisions at the LHC proton-proton collider. Both the data rate and the data volumes will largely differ from the past experience. The POOL data storage mechanism is intended to be able to cope with the experiment's requirements applying a flexible multi technology data persistency mechanism. The developed technology independent approach is flexible enough to adopt new technologies, take advantage of existing schema evolution mechanisms and allows users to access data in a technology independent way. The framework consists of several components, which can be individually adopted and integrated into existing experiment frameworks.
△ Less
Submitted 11 June, 2003;
originally announced June 2003.