-
Superconducting phase diagram in Bi$_x$Ni$_{1-x}$ thin films$\colon$ the effects of Bi stoichiometry on superconductivity
Authors:
Jihun Park,
Jarryd A. Horn,
Dylan J. Kirsch,
Rohit K. Pant,
Hyeok Yoon,
Sungha Baek,
Suchismita Sarker,
Apurva Mehta,
Xiaohang Zhang,
Seunghun Lee,
Richard Greene,
Johnpierre Paglione,
Ichiro Takeuchi
Abstract:
The Bi${-}$Ni binary system has been of interest due to possible unconventional superconductivity aroused therein, such as time-reversal symmetry breaking in Bi/Ni bilayers or the coexistence of superconductivity and ferromagnetism in Bi$_3$Ni crystals. While Ni acts as a ferromagnetic element in such systems, the role of strong spin-orbit-coupling element Bi in superconductivity has remained unex…
▽ More
The Bi${-}$Ni binary system has been of interest due to possible unconventional superconductivity aroused therein, such as time-reversal symmetry breaking in Bi/Ni bilayers or the coexistence of superconductivity and ferromagnetism in Bi$_3$Ni crystals. While Ni acts as a ferromagnetic element in such systems, the role of strong spin-orbit-coupling element Bi in superconductivity has remained unexplored. In this work, we systematically studied the effects of Bi stoichiometry on the superconductivity of Bi$_x$Ni$_{1-x}$ thin films (${x} \approx$ 0.5 to 0.9) fabricated via a composition-spread approach. The superconducting phase map of Bi$_x$Ni$_{1-x}$ thin films exhibited a superconducting composition region attributable to the intermetallic Bi$_3$Ni phase with different amount of excess Bi, revealed by synchrotron X-ray diffraction analysis. Interestingly, the mixed phase region with Bi$_3$Ni and Bi showed unusual increases in the superconducting transition temperature and residual resistance ratio as more Bi impurities were included, with the maximum ${T}_{c}$ ($=$ 4.2 K) observed at $x \approx$ 0.79. A correlation analysis of structural, electrical, and magneto-transport characteristics across the composition variation revealed that the unusual superconducting $"$dome$"$ is due to two competing roles of Bi$\colon$ impurity scattering and carrier do**. We found that the carrier do** effect is dominant in the mild do** regime (0.74 $\leq {x} \leq$ 0.79), while impurity scattering becomes more pronounced at larger Bi stoichiometry.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Evolution of ferroelectric properties in SmxBi1-xFeO3 via automated Piezoresponse Force Microscopy across combinatorial spread libraries
Authors:
Aditya Raghavan,
Rohit Pant,
Ichiro Takeuchi,
Eugene A. Eliseev,
Marti Checa,
Anna N. Morozovska,
Maxim Ziatdinov,
Sergei V. Kalinin,
Yongtao Liu
Abstract:
Combinatorial spread libraries offer a unique approach to explore evolution of materials properties over the broad concentration, temperature, and growth parameter spaces. However, the traditional limitation of this approach is the requirement for the read-out of functional properties across the library. Here we demonstrate the application of automated Piezoresponse Force Microscopy (PFM) for the…
▽ More
Combinatorial spread libraries offer a unique approach to explore evolution of materials properties over the broad concentration, temperature, and growth parameter spaces. However, the traditional limitation of this approach is the requirement for the read-out of functional properties across the library. Here we demonstrate the application of automated Piezoresponse Force Microscopy (PFM) for the exploration of the physics in the SmxBi1-xFeO3 system with the ferroelectric-antiferroelectric morphotropic phase boundary. This approach relies on the synergy of the quantitative nature of PFM and the implementation of automated experiments that allows PFM-based gird sampling over macroscopic samples. The concentration dependence of pertinent ferroelectric parameters has been determined and used to develop the mathematical framework based on Ginzburg-Landau theory describing the evolution of these properties across the concentration space. We pose that combination of automated scanning probe microscope and combinatorial spread library approach will emerge as an efficient research paradigm to close the characterization gap in the high-throughput materials discovery. We make the data sets open to the community and hope that will stimulate other efforts to interpret and understand the physics of these systems.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Co-orchestration of Multiple Instruments to Uncover Structure-Property Relationships in Combinatorial Libraries
Authors:
Boris N. Slautin,
Utkarsh Pratiush,
Ilia N. Ivanov,
Yongtao Liu,
Rohit Pant,
Xiaohang Zhang,
Ichiro Takeuchi,
Maxim A. Ziatdinov,
Sergei V. Kalinin
Abstract:
The rapid growth of automated and autonomous instrumentations brings forth an opportunity for the co-orchestration of multimodal tools, equipped with multiple sequential detection methods, or several characterization tools to explore identical samples. This can be exemplified by the combinatorial libraries that can be explored in multiple locations by multiple tools simultaneously, or downstream c…
▽ More
The rapid growth of automated and autonomous instrumentations brings forth an opportunity for the co-orchestration of multimodal tools, equipped with multiple sequential detection methods, or several characterization tools to explore identical samples. This can be exemplified by the combinatorial libraries that can be explored in multiple locations by multiple tools simultaneously, or downstream characterization in automated synthesis systems. In the co-orchestration approaches, information gained in one modality should accelerate the discovery of other modalities. Correspondingly, the orchestrating agent should select the measurement modality based on the anticipated knowledge gain and measurement cost. Here, we propose and implement a co-orchestration approach for conducting measurements with complex observables such as spectra or images. The method relies on combining dimensionality reduction by variational autoencoders with representation learning for control over the latent space structure, and integrated into iterative workflow via multi-task Gaussian Processes (GP). This approach further allows for the native incorporation of the system's physics via a probabilistic model as a mean function of the GP. We illustrated this method for different modalities of piezoresponse force microscopy and micro-Raman on combinatorial $Sm-BiFeO_3$ library. However, the proposed framework is general and can be extended to multiple measurement modalities and arbitrary dimensionality of measured signals. The analysis code that supports the funding is publicly available at https://github.com/Slautin/2024_Co-orchestration.
△ Less
Submitted 17 March, 2024; v1 submitted 3 February, 2024;
originally announced February 2024.
-
A case study of multi-modal, multi-institutional data management for the combinatorial materials science community
Authors:
Sarah I. Allec,
Eric S. Muckley,
Nathan S. Johnson,
Christopher K. H. Borg,
Dylan J. Kirsch,
Joshua Martin,
Rohit Pant,
Ichiro Takeuchi,
Andrew S. Lee,
James E. Saal,
Logan Ward,
Apurva Mehta
Abstract:
Although the convergence of high-performance computing, automation, and machine learning has significantly altered the materials design timeline, transformative advances in functional materials and acceleration of their design will require addressing the deficiencies that currently exist in materials informatics, particularly a lack of standardized experimental data management. The challenges asso…
▽ More
Although the convergence of high-performance computing, automation, and machine learning has significantly altered the materials design timeline, transformative advances in functional materials and acceleration of their design will require addressing the deficiencies that currently exist in materials informatics, particularly a lack of standardized experimental data management. The challenges associated with experimental data management are especially true for combinatorial materials science, where advancements in automation of experimental workflows have produced datasets that are often too large and too complex for human reasoning. The data management challenge is further compounded by the multi-modal and multi-institutional nature of these datasets, as they tend to be distributed across multiple institutions and can vary substantially in format, size, and content. To adequately map a materials design space from such datasets, an ideal materials data infrastructure would contain data and metadata describing i) synthesis and processing conditions, ii) characterization results, and iii) property and performance measurements. Here, we present a case study for the low-barrier development of such a dashboard that enables standardized organization, analysis, and visualization of a large data lake consisting of combinatorial datasets of synthesis and processing conditions, X-ray diffraction patterns, and materials property measurements generated at several different institutions. While this dashboard was developed specifically for data-driven thermoelectric materials discovery, we envision the adaptation of this prototype to other materials applications, and, more ambitiously, future integration into an all-encompassing materials data management infrastructure.
△ Less
Submitted 6 February, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Levels of Autonomous Radiology
Authors:
Suraj Ghuwalewala,
Viraj Kulkarni,
Richa Pant,
Amit Kharat
Abstract:
Radiology, being one of the younger disciplines of medicine with a history of just over a century, has witnessed tremendous technological advancements and has revolutionized the way we practice medicine today. In the last few decades, medical imaging modalities have generated seismic amounts of medical data. The development and adoption of Artificial Intelligence (AI) applications using this data…
▽ More
Radiology, being one of the younger disciplines of medicine with a history of just over a century, has witnessed tremendous technological advancements and has revolutionized the way we practice medicine today. In the last few decades, medical imaging modalities have generated seismic amounts of medical data. The development and adoption of Artificial Intelligence (AI) applications using this data will lead to the next phase of evolution in radiology. It will include automating laborious manual tasks such as annotations, report-generation, etc., along with the initial radiological assessment of cases to aid radiologists in their evaluation workflow. We propose a level-wise classification for the progression of automation in radiology, explaining AI assistance at each level with corresponding challenges and solutions. We hope that such discussions can help us address the challenges in a structured way and take the necessary steps to ensure the smooth adoption of new technologies in radiology.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Non-adiabatic dynamics in Rydberg gases with random atom positions
Authors:
Ritesh Pant,
Rajat Agrawal,
Sebastian Wüster,
Jan-Michael Rost
Abstract:
Assemblies of highly excited Rydberg atoms in an ultracold gas can be set into motion by a combination of van-der-Waals and resonant dipole-dipole interactions. Thereby, the collective electronic Rydberg state might change due to non-adiabatic transitions, in particular if the configuration encounters a conical interaction. For the experimentally most accessible scenario, in which the Rydberg atom…
▽ More
Assemblies of highly excited Rydberg atoms in an ultracold gas can be set into motion by a combination of van-der-Waals and resonant dipole-dipole interactions. Thereby, the collective electronic Rydberg state might change due to non-adiabatic transitions, in particular if the configuration encounters a conical interaction. For the experimentally most accessible scenario, in which the Rydberg atoms are initially randomly excited in a three-dimensional bulk gas under blockade conditions, we numerically show that non-adiabatic transitions can be common when starting from the most energetic repulsive BO-surface. We outline how this state can be selectively excited using a microwave resonance, and demonstrate a regime where almost all collisional ionization of Rydberg atoms can be traced back to a prior non-adiabatic transition. Since Rydberg ionisation is relatively straightforward to detect, the excitation and measurement scheme considered here renders non-adiabatic effects in Rydberg motion easier to demonstrate experimentally than in scenarios considered previously.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
A measure for adiabatic contributions to quantum transitions
Authors:
R. Pant,
P. K. Verma,
C. Rangi,
E. Mondal,
M. Bhati,
V. Srinivasan,
S. Wüster
Abstract:
We construct a measure for the adiabatic contribution to quantum transitions in an arbitrary basis, tackling the generic complex case where dynamics is only partially adiabatic, simultaneously populates several eigenstates and transitions between non-eigenstates are of key interest. Our measure is designed to distinguish transitions between basis states that occur due to the adiabatic change of th…
▽ More
We construct a measure for the adiabatic contribution to quantum transitions in an arbitrary basis, tackling the generic complex case where dynamics is only partially adiabatic, simultaneously populates several eigenstates and transitions between non-eigenstates are of key interest. Our measure is designed to distinguish transitions between basis states that occur due to the adiabatic change of the underlying populated eigenstates from transitions that occur due to beating between several such eigenstates. We demonstrate that the measure can be applied to material or molecular simulations using time-dependent density functional theory, allowing to quantify the relative importance of adiabaticity and thus nuclear motion, for example, in charge or energy transfer.
△ Less
Submitted 16 May, 2023; v1 submitted 21 July, 2020;
originally announced July 2020.
-
Excitation Transport in Molecular Aggregates with thermal motion
Authors:
R. Pant,
S. Wüster
Abstract:
Molecular aggregates can under certain conditions transport electronic excitation energy over large distances due to dipole-dipole interactions. Here, we explore to what extent thermal motion of entire monomers can guide or enhance this excitation transport. The motion induces changes of aggregate geometry and hence modifies exciton states. Under certain conditions, excitation energy can thus be t…
▽ More
Molecular aggregates can under certain conditions transport electronic excitation energy over large distances due to dipole-dipole interactions. Here, we explore to what extent thermal motion of entire monomers can guide or enhance this excitation transport. The motion induces changes of aggregate geometry and hence modifies exciton states. Under certain conditions, excitation energy can thus be transported by the aggregate adiabatically, following a certain exciton eigenstate. While such transport is always slower than direct migration through dipole-dipole interactions, we show that transport through motion can yield higher transport efficiencies in the presence of on-site energy disorder than the static counterpart. For this we consider two simple models of molecular motion: (i) longitudinal vibrations of the monomers along the aggregation direction within their inter-molecular binding potential and (ii) torsional motion of planar monomers in a plane orthogonal to the aggregation direction. The parameters and potential shapes used are relevant to dye-molecule aggregates. We employ a quantum-classical method, in which molecules move through simplified classical molecular dynamics, while the excitation transport is treated quantum mechanically using Schrödinger's equation. For both models we find parameter regimes in which the motion enhances excitation transport, however these are more realistic for the torsional scenario, due to the limited motional range in a typical Morse type inter-molecular potential. We finally show that the transport enhancement can be linked to adiabatic quantum dynamics. This transport enhancement through adiabatic motion appears a useful resource to combat exciton trap** by disorder.
△ Less
Submitted 19 December, 2020; v1 submitted 21 February, 2020;
originally announced February 2020.
-
Formation and magnetic properties of spark plasma sintered Mn$_{3-δ}$ ($δ$ = 0, 1) alloys
Authors:
Sonam Perween,
A. Rathi,
R. P. Singh,
A. Bhattacharya,
Parul Rani Raghuvanshi,
P. V. Prakash Madduri,
P. K. Rout,
B. Sivaiah,
Ajay Dhar,
R. P. Pant,
B. Gahtori,
G. A. Basheed
Abstract:
We present the synthesis of D0$_{22}$ Mn$_{3 - δ}$Ga ($δ$ = 0, 1) Heusler alloys by Spark Plasma Sintering method. The single phase Mn$_3$Ga (T$_\mathrm{c}$ $\simeq$ 780 K) is synthesized, while Mn$_2$Ga (T$_\mathrm{c}$ $\simeq$ 710 K) is found to coexist with a near-stoichiometric room temperature paramagnetic Mn$_9$Ga$_5$~($\approx$ 15 \%) phase due to its lower formation energy, as confirmed fr…
▽ More
We present the synthesis of D0$_{22}$ Mn$_{3 - δ}$Ga ($δ$ = 0, 1) Heusler alloys by Spark Plasma Sintering method. The single phase Mn$_3$Ga (T$_\mathrm{c}$ $\simeq$ 780 K) is synthesized, while Mn$_2$Ga (T$_\mathrm{c}$ $\simeq$ 710 K) is found to coexist with a near-stoichiometric room temperature paramagnetic Mn$_9$Ga$_5$~($\approx$ 15 \%) phase due to its lower formation energy, as confirmed from our density functional theory (DFT) calculations. The alloys show hard magnetic behavior with large room temperature spontaneous magnetization m$_s$(80 kOe) = 1.63 (0.83) $μ_\mathrm{B}$/f.u. and coercivity H$_\mathrm{c}$ = 4.28 (3.35) kOe for Mn$_3$Ga (Mn$_2$Ga). The magnetic properties are further investigated till T$_\mathrm{c}$ and the H$_\mathrm{c}$ (T) analysis by Stoner-Wohlfarth model shows the nucleation mechanism for the magnetization reversal. The experimental results are well supported by DFT calculations, which reveal that the ground state of D0$_{22}$ Mn$_2$Ga is achieved by the removal of Mn-atoms from full Heusler Mn$_3$Ga structure in accordance with half Heusler alloy picture.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
AlertMix: A Big Data platform for multi-source streaming data
Authors:
Ayush Singhal,
Rakesh Pant,
Pradeep Sinha
Abstract:
The demand for stream processing is increasing at an unprecedented rate. Big data is no longer limited to processing of big volumes of data. In most real-world scenarios, the need for processing stream data as it comes can only meet the business needs. It is required for trading, fraud detection, system monitoring, product maintenance and of course social media data such as Twitter and YouTube vid…
▽ More
The demand for stream processing is increasing at an unprecedented rate. Big data is no longer limited to processing of big volumes of data. In most real-world scenarios, the need for processing stream data as it comes can only meet the business needs. It is required for trading, fraud detection, system monitoring, product maintenance and of course social media data such as Twitter and YouTube videos. In such cases, a "too late architecture" that focuses on batch processing cannot realize the use cases. In this article, we present an end to end Big data platform called AlertMix for processing multi-source streaming data. Its architecture and how various Big data technologies are utilized are explained in this work. We present the performance of our platform on real live streaming data which is currently handled by the platform.
△ Less
Submitted 18 June, 2018;
originally announced June 2018.
-
Use of Deep Learning in Modern Recommendation System: A Summary of Recent Works
Authors:
Ayush Singhal,
Pradeep Sinha,
Rakesh Pant
Abstract:
With the exponential increase in the amount of digital information over the internet, online shops, online music, video and image libraries, search engines and recommendation system have become the most convenient ways to find relevant information within a short time. In the recent times, deep learning's advances have gained significant attention in the field of speech recognition, image processin…
▽ More
With the exponential increase in the amount of digital information over the internet, online shops, online music, video and image libraries, search engines and recommendation system have become the most convenient ways to find relevant information within a short time. In the recent times, deep learning's advances have gained significant attention in the field of speech recognition, image processing and natural language processing. Meanwhile, several recent studies have shown the utility of deep learning in the area of recommendation systems and information retrieval as well. In this short review, we cover the recent advances made in the field of recommendation using various variants of deep learning technology. We organize the review in three parts: Collaborative system, Content based system and Hybrid system. The review also discusses the contribution of deep learning integrated recommendation systems into several application domains. The review concludes by discussion of the impact of deep learning in recommendation system in various domain and whether deep learning has shown any significant improvement over the conventional systems for recommendation. Finally, we also provide future directions of research which are possible based on the current state of use of deep learning in recommendation systems.
△ Less
Submitted 20 December, 2017;
originally announced December 2017.
-
Malware Detection Approach for Android systems Using System Call Logs
Authors:
Sanya Chaba,
Rahul Kumar,
Rohan Pant,
Mayank Dave
Abstract:
Static detection technologies based on signature-based approaches that are widely used in Android platform to detect malicious applications. It can accurately detect malware by extracting signatures from test data and then comparing the test data with the signature samples of virus and benign samples. However, this method is generally unable to detect unknown malware applications. This is because,…
▽ More
Static detection technologies based on signature-based approaches that are widely used in Android platform to detect malicious applications. It can accurately detect malware by extracting signatures from test data and then comparing the test data with the signature samples of virus and benign samples. However, this method is generally unable to detect unknown malware applications. This is because, sometimes, the machine code can be converted into assembly code, which can be easily read and understood by humans. Furthuremore, the attacker can then make sense of the assembly instructions and understand the functioning of the program from the same. Therefore we focus on observing the behaviour of the malicious software while it is actually running on a host system. The dynamic behaviours of an application are conducted by the system call sequences at the end. Hence, we observe the system call log of each application, use the same for the construction of our dataset, and finally use this dataset to classify an unknown application as malicious or benign.
△ Less
Submitted 25 September, 2017;
originally announced September 2017.
-
Fixed point results for a generalized class of simulation functions with applications
Authors:
D. K. Patel,
P. R. Patle,
R. Pant,
D. Gopal
Abstract:
In this paper, we consider a wider class of simulation functions and present some coincidence and common fixed point results in metric spaces. Results obtained in this paper extend, generalize and unify some well-known fixed and common fixed point results. Some illustrative examples are presented. We also discuss some applications to system of integral equations and functional equations arising in…
▽ More
In this paper, we consider a wider class of simulation functions and present some coincidence and common fixed point results in metric spaces. Results obtained in this paper extend, generalize and unify some well-known fixed and common fixed point results. Some illustrative examples are presented. We also discuss some applications to system of integral equations and functional equations arising in dynamic programming.
△ Less
Submitted 20 September, 2017; v1 submitted 22 August, 2017;
originally announced August 2017.
-
Griffiths phase and critical behavior in layered Sr$_2$IrO$_4$ ferromagnet
Authors:
A. Rathi,
Sonam Perween,
P. K. Rout,
R. P. Singh,
Anurag Gupta,
Sukhvir Singh,
B. Gahtori,
B. Sivaiah,
Ajay Dhar,
A. K. Shukla,
R. K. Rakshit,
R. P. Pant,
G. A. Basheed
Abstract:
We report the existence of Griffiths phase (GP) and its influence on critical phenomena in layered Sr$_2$IrO$_4$ ferromagnet (T$_C$ = 221.5 K). The power law behavior of inverse magentic susceptibility, 1/$χ$(T) with exponent $λ= 0.18(2)$ confirm the GP in the regime T$_C$ $<$ T $\leq$ T$_G$ = 279.0(5) K. Moreover, the detailed critical analysis via modified Arrott plot method exhibits unrealistic…
▽ More
We report the existence of Griffiths phase (GP) and its influence on critical phenomena in layered Sr$_2$IrO$_4$ ferromagnet (T$_C$ = 221.5 K). The power law behavior of inverse magentic susceptibility, 1/$χ$(T) with exponent $λ= 0.18(2)$ confirm the GP in the regime T$_C$ $<$ T $\leq$ T$_G$ = 279.0(5) K. Moreover, the detailed critical analysis via modified Arrott plot method exhibits unrealistic critical exponents $β$ = 0.77(1), $γ$ = 1.59(2) and $δ= 3.06(4)$, in corroboration with magneto-caloric study. The abnormal exponent values have been viewed in context of ferromagnetic-Griffiths phase transition. The GP has been further analyzed using Bray model, which yields a reliable value of $β$ = 0.19(2), belonging to the two-dimensional (2D) XYh$_4$ universality class with strong anisotropy present in Sr$_2$IrO$_4$. The present study proposes Bray model as a possible tool to investigate the critical behavior for Griffiths ferromagnets in place of conventional Arrott plot analysis. The possible origins of GP and its correlation with insulating nature of Sr$_2$IrO$_4$ have been discussed.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Enhanced Slippery Behavior and Stability of Lubricating Fluid Infused Nanostructured Surfaces
Authors:
Reeta Pant,
Sanjeev Kumar Ujjain,
Arun Kumar Nagarajan,
Krishnacharya Khare
Abstract:
Stability of lubricating fluid infused slippery surfaces is a concern for scientists and engineers and attempts are being made for its improvement. Lubricating oil coated slippery surface for aqueous drops is one of the important candidates in this class and their stability needs be improved to make them useful for practical applications. Cloaking of water drops with thin lubricant layer results i…
▽ More
Stability of lubricating fluid infused slippery surfaces is a concern for scientists and engineers and attempts are being made for its improvement. Lubricating oil coated slippery surface for aqueous drops is one of the important candidates in this class and their stability needs be improved to make them useful for practical applications. Cloaking of water drops with thin lubricant layer results in the loss of lubricant leading to deterioration of slippery behavior. Surface roughness or porosity provides larger surface area to the lubricating fluid and would to affect the stability of the lubricating film. Here we report the effect of surface roughness, from tens of nanometer to few microns, on the stability of slippery surface. Samples with small nanoscale roughness show improved performance in terms of contact angle hysteresis, critical tilt angle and slip velocity. Whereas large roughness samples show poorer performance compared to small nanoscale roughness and smooth samples. Small nanoscale roughness samples also show relatively slower deterioration against loss of lubricant during water flow. Once completely lost, the slippery behavior can be restored again simply by coating the sample again by the lubricating fluid.
△ Less
Submitted 11 February, 2016;
originally announced February 2016.
-
Mechanically Tunable Slippery Behavior on Soft Poly(dimethylsiloxane) (PDMS) Based Anisotropic Wrinkles Infused with Lubricating Fluid
Authors:
Pritam Kumar Roy,
Reeta Pant,
Arun Kumar Nagarajan,
Krishnacharya Khare
Abstract:
We demonstrate a novel technique to fabricate mechanically tunable slippery surfaces using one dimensional (anisotropic) elastic wrinkles. Such wrinkles show tunable topography (amplitude) on the application of mechanical strain. Following Nepenthes pitcher plants, lubricating fluid infused solid surfaces show excellent slippery behavior for test liquid drops. Therefore combining the above two i.e…
▽ More
We demonstrate a novel technique to fabricate mechanically tunable slippery surfaces using one dimensional (anisotropic) elastic wrinkles. Such wrinkles show tunable topography (amplitude) on the application of mechanical strain. Following Nepenthes pitcher plants, lubricating fluid infused solid surfaces show excellent slippery behavior for test liquid drops. Therefore combining the above two i.e. infusing suitable lubricating fluid on elastic wrinkles would enable us to fabricate mechanically tunable slippery surfaces. Completely stretched (flat) wrinkles have uniform coating of lubricating fluid whereas completely relaxed (full amplitude) wrinkles have most of the lubricating oil in the wrinkle grooves. Therefore water drops on completely stretched surface show excellent slippery behavior whereas on completely relaxed surface they show very poor slippery behavior. Therefore continuous variation of wrinkle stretching provide reversibly tunable slippery behavior on such system. Since the winkles are one dimensional, they show anisotropic tunability of slippery behavior depending upon whether test liquid drops slip parallel or perpendicular to the wrinkles.
△ Less
Submitted 11 February, 2016;
originally announced February 2016.
-
Investigation of slippery behaviour of lubricating fluid coated smooth hydrophilic surfaces
Authors:
Reeta Pant,
Pritam Kumar Roy,
Arun Kumar Nagarajan,
Krishnacharya Khare
Abstract:
In the recent years many research groups have studied slippery properties on lubricating fluid infused rough surfaces using hydrophobic substrates. These surfaces show excellent slippery behaviour for water and other liquids. Here we demonstrate a simple method to fabricate stable slippery surfaces based on silicone oil coated hydrophilic samples. At room temperature, as prepared samples exhibit n…
▽ More
In the recent years many research groups have studied slippery properties on lubricating fluid infused rough surfaces using hydrophobic substrates. These surfaces show excellent slippery behaviour for water and other liquids. Here we demonstrate a simple method to fabricate stable slippery surfaces based on silicone oil coated hydrophilic samples. At room temperature, as prepared samples exhibit non-slippery behaviour due to sinking of water drops inside silicone oil layer because of inherently hydrophilic silicon substrate. Subsequent annealing at higher temperatures provides covalent bonding of silicone molecules at silicon surface making the surface hydrophobic which was confirmed by lubricant wash tests. So the silicone oil coated annealed samples show excellent water repellency, very low contact angle hysteresis and very good slippery behavior. But these surfaces show poor oil stability against drops flow due to cloaking of the oil around water drops which can be prevented by using drops of larger volume or continuous flow of water.
△ Less
Submitted 4 August, 2015;
originally announced August 2015.
-
Low power, chip-based stimulated Brillouin scattering microwave photonic filter with ultrahigh selectivity
Authors:
David Marpaung,
Blair Morrison,
Mattia Pagani,
Ravi Pant,
Duk-Yong Choi,
Barry Luther-Davies,
Steve J. Madden,
Benjamin J. Eggleton
Abstract:
Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning…
▽ More
Highly selective and reconfigurable microwave filters are of great importance in radio-frequency signal processing. Microwave photonic (MWP) filters are of particular interest, as they offer flexible reconfiguration and an order of magnitude higher frequency tuning range than electronic filters. However, all MWP filters to date have been limited by trade-offs between key parameters such as tuning range, resolution, and suppression. This problem is exacerbated in the case of integrated MWP filters, blocking the path to compact, high performance filters. Here we show the first chip-based MWP band-stop filter with ultra-high suppression, high resolution in the MHz range, and 0-30 GHz frequency tuning. This record performance was achieved using an ultra-low Brillouin gain from a compact photonic chip and a novel approach of optical resonance-assisted RF signal cancellation. The results point to new ways of creating energy-efficient and reconfigurable integrated MWP signal processors for wireless communications and defence applications.
△ Less
Submitted 13 December, 2014;
originally announced December 2014.
-
Phase-locking in Multi-Frequency Brillouin Oscillator via Four Wave Mixing
Authors:
Thomas F. S. Buettner,
Irina V. Kabakova,
Darren D. Hudson,
Ravi Pant,
Christopher G. Poulton,
Alexander C. Judge,
Benjamin J. Eggleton
Abstract:
Stimulated Brillouin scattering (SBS) and Kerr-nonlinear four wave-mixing (FWM) are among the most important and widely studied nonlinear effects in optical fibres. At high powers SBS can be cascaded producing multiple Stokes waves spaced by the Brillouin frequency shift. Here, we investigate the complex nonlinear interaction of the cascade of Stokes waves, generated in a Fabry-Perot chalcogenide…
▽ More
Stimulated Brillouin scattering (SBS) and Kerr-nonlinear four wave-mixing (FWM) are among the most important and widely studied nonlinear effects in optical fibres. At high powers SBS can be cascaded producing multiple Stokes waves spaced by the Brillouin frequency shift. Here, we investigate the complex nonlinear interaction of the cascade of Stokes waves, generated in a Fabry-Perot chalcogenide fibre resonator through the combined action of SBS and FWM. We demonstrate the existence of parameter regimes, in which pump and Stokes waves attain a phase-locked steady state. Real-time measurements of 40ps pulses with 8GHz repetition rate are presented, confirming short-and long-term stability. Numerical simulations qualitatively agree with experiments and show the significance of FWM in phase-locking of pump and Stokes waves. Our findings can be applied for the design of novel picosecond pulse sources with GHz repetition rate for optical communication systems.
△ Less
Submitted 17 February, 2014;
originally announced February 2014.
-
Si3N4 ring resonator-based microwave photonic notch filter with an ultrahigh peak rejection
Authors:
David Marpaung,
Blair Morrison,
Ravi Pant,
Chris Roeloffzen,
Arne Leinse,
Marcel Hoekman,
Rene Heideman,
Benjamin J. Eggleton
Abstract:
We report a simple technique in microwave photonic (MWP) signal processing that allows the use of an optical filter with a shallow notch to exhibit a microwave notch filter with anomalously high rejection level. We implement this technique using a low-loss, tunable Si3N4 optical ring resonator as the optical filter, and achieved an MWP notch filter with an ultra-high peak rejection > 60 dB, a tuna…
▽ More
We report a simple technique in microwave photonic (MWP) signal processing that allows the use of an optical filter with a shallow notch to exhibit a microwave notch filter with anomalously high rejection level. We implement this technique using a low-loss, tunable Si3N4 optical ring resonator as the optical filter, and achieved an MWP notch filter with an ultra-high peak rejection > 60 dB, a tunable high resolution bandwidth of 247-840 MHz, and notch frequency tuning of 2-8 GHz. To our knowledge, this is a record combined peak rejection and resolution for an integrated MWP filter.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
Frequency agile microwave photonic notch filter with anomalously-high stopband rejection
Authors:
David Marpaung,
Blair Morrison,
Ravi Pant,
Benjamin J. Eggleton
Abstract:
We report a novel class microwave photonic (MWP) notch filter with a very narrow isolation bandwidth (10 MHz), an ultrahigh stopband rejection (> 60 dB), a wide frequency tuning (1-30 GHz), and flexible bandwidth reconfigurability (10-65 MHz). This record performance is enabled by a new concept of sidebands amplitude and phase controls using an electro-optic modulator and an optical filter. This n…
▽ More
We report a novel class microwave photonic (MWP) notch filter with a very narrow isolation bandwidth (10 MHz), an ultrahigh stopband rejection (> 60 dB), a wide frequency tuning (1-30 GHz), and flexible bandwidth reconfigurability (10-65 MHz). This record performance is enabled by a new concept of sidebands amplitude and phase controls using an electro-optic modulator and an optical filter. This new concept enables energy efficient operation in active MWP notch filters, and opens up the pathway to enable low-power nanophotonic devices as high performance RF filters.
△ Less
Submitted 5 August, 2013;
originally announced August 2013.
-
Acoustic confinement and Stimulated Brillouin Scattering in integrated optical waveguides
Authors:
Christopher G. Poulton,
Ravi Pant,
Benjamin J. Eggleton
Abstract:
We examine the effect of acoustic mode confinement on Stimulated Brillouin Scattering in optical waveguides that consist of a guiding core embedded in a solid substrate. We find that SBS can arise due to coupling to acoustic modes in three different regimes. First, the acoustic modes may be guided by total internal reflection; in this case the SBS gain depends directly on the degree of confinement…
▽ More
We examine the effect of acoustic mode confinement on Stimulated Brillouin Scattering in optical waveguides that consist of a guiding core embedded in a solid substrate. We find that SBS can arise due to coupling to acoustic modes in three different regimes. First, the acoustic modes may be guided by total internal reflection; in this case the SBS gain depends directly on the degree of confinement of the acoustic mode in the core, which is in turn determined by the acoustic V-parameter. Second, the acoustic modes may be leaky, but may nevertheless have a sufficiently long lifetime to have a large effect on the SBS gain; the lifetime of acoustic modes in this regime depends not only on the contrast in acoustic properties between the core and the cladding, but is also highly dependent on the waveguide dimensions. Finally SBS may occur due to coupling to free modes, which exist even in the absence of acoustic confinement; we find that the cumulative effect of coupling to these non-confined modes results in significant SBS gain. We show how the different acoustic properties of core and cladding lead to these different regimes, and discuss the feasibility of SBS experiments using different material systems.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
-
Narrow linewidth Brillouin laser based on chalcogenide photonic chip
Authors:
Irina V. Kabakova,
Ravi Pant,
Duk-Yong Choi,
Sukhanta Debbarma,
Barry Luther-Davies,
Stephen J. Madden,
Benjamin J. Eggleton
Abstract:
We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the sa…
▽ More
We present the first demonstration of a narrow linewidth, waveguide-based Brillouin laser which is enabled by large Brillouin gain of a chalcogenide chip. The waveguides are equipped with vertical tapers for low loss coupling. Due to optical feedback for the Stokes wave, the lasing threshold is reduced to 360 mW, which is 5 times lower than the calculated single-pass Brillouin threshold for the same waveguide. The slope efficiency of the laser is found to be 30% and the linewidth of 100 kHz is measured using a self-heterodyne method.
△ Less
Submitted 25 July, 2013;
originally announced July 2013.
-
Evolution of ferromagnetic and spin-wave resonances with crystalline order in thin films of full-Heusler alloy Co2MnSi
Authors:
Himanshu Pandey,
P. C. Joshi,
R. P. Pant,
R. Prasad,
S. Auluck,
R. C. Budhani
Abstract:
We report the evolution of magnetic moment as well as magnetic anisotropy with crystalline order in Co$_2$MnSi thin films grown on $(100)$ MgO by pulsed laser deposition. The films become more ordered as the annealing temperature ($T_A$) increases from 400 to 600 $^0$C. The extent of \emph{L}$2_1$ ordering in the films annealed at 600 $^0$C is $\approx 96%$. The static magnetization measurements b…
▽ More
We report the evolution of magnetic moment as well as magnetic anisotropy with crystalline order in Co$_2$MnSi thin films grown on $(100)$ MgO by pulsed laser deposition. The films become more ordered as the annealing temperature ($T_A$) increases from 400 to 600 $^0$C. The extent of \emph{L}$2_1$ ordering in the films annealed at 600 $^0$C is $\approx 96%$. The static magnetization measurements by vibrating sample magnetometry shows a maximum moment of 4.95 $μ_B$ per formula unit with low coercivity ($H_C$ $\approx$ 65 Oe) in the films annealed at 600 $^0$C. A rigorous analysis of the azimuthal and polar angle dependent ferromagnetic resonance (FMR) measured at several temperatures allows determination of various anisotropy fields relevant to our system as a function of $T_A$. Finally, we have evaluated the exchange stiffness constant down to 100 K using spin wave modes in FMR spectra. We have also estimated the exchange energies as well as stiffness constant by varying the lattice parameter \emph{ab-initio} using the Korringa-Kohn-Rostoker method.
△ Less
Submitted 30 May, 2013;
originally announced May 2013.