Showing 1–5 of 5 results for author: Pandiyan, R

Large Area X-ray Proportional Counter (LAXPC) Instrument on AstroSat and Some Preliminary Results from its performance in the orbit

Authors: P. C. Agrawal, J. S. Yadav, H. M. Antia, Dhiraj Dedhia, P. Shah, Jai Verdhan Chauhan, R. K. Manchanda, V. R. Chitnis, V. M. Gujar, Tilak Katoch, V. N. Kurhade, P. Madhwani, T. K. Manojkumar, V. A. Nikam, A. S. Pandya, J. V. Parmar, D. M. Pawar, Jayashree Roy, B. Paul, Mayukh Pahari, Ranjeev Misra, M. H. Ravichandran, K. Anilkumar, C. C. Joseph, K. H. Navalgund , et al. (3 additional authors not shown)

Abstract: Large Area X-ray Propositional Counter (LAXPC) instrument on AstroSat is aimed at providing high time resolution X-ray observations in 3 to 80 keV energy band with moderate energy resolution. To achieve large collecting area, a cluster of three co-aligned identical LAXPC detectors, is used to realize an effective area in access of about 6000 cm2 at 15 keV. The large detection volume of the LAXPC d… ▽ More Large Area X-ray Propositional Counter (LAXPC) instrument on AstroSat is aimed at providing high time resolution X-ray observations in 3 to 80 keV energy band with moderate energy resolution. To achieve large collecting area, a cluster of three co-aligned identical LAXPC detectors, is used to realize an effective area in access of about 6000 cm2 at 15 keV. The large detection volume of the LAXPC detectors, filled with xenon gas at about 2 atmosphere pressure, results in detection efficiency greater than 50%, above 30 keV. In this article, we present salient features of the LAXPC detectors, their testing and characterization in the laboratory prior to launch and calibration in the orbit. Some preliminary results on timing and spectral characteristics of a few X-ray binaries and other type of sources, are briefly discussed to demonstrate that the LAXPC instrument is performing as planned in the orbit. △ Less

Submitted 25 May, 2017; v1 submitted 18 May, 2017; originally announced May 2017.

Comments: 11 pages, 15 Figures, Accepted for publication in Journal of Astronomy and Astrophysics

Calibration of the Large Area X-ray Proportional Counter (LAXPC) instrument on-board AstroSat

Authors: H. M. Antia, J. S. Yadav, P. C. Agrawal, Jai Verdhan Chauhan, R. K. Manchanda, Varsha Chitnis, Biswajit Paul, Dhiraj Dedhia, Parag Shah, V. M. Gujar, Tilak Katoch, V. N. Kurhade, Pankaj Madhwani, T. K. Manojkumar, V. A. Nikam, A. S. Pandya, J. V. Parmar, D. M. Pawar, Mayukh Pahari, Ranjeev Misra, K. H. Navalgund, R. Pandiyan, K. S. Sharma, K. Subbarao

Abstract: We present the calibration and background model for the Large Area X-ray Proportional Counter (LAXPC) detectors on-board AstroSat. LAXPC instrument has three nominally identical detectors to achieve large collecting area. These detectors are independent of each other and in the event analysis mode, they record the arrival time and energy of each photon that is detected. The detectors have a time-r… ▽ More We present the calibration and background model for the Large Area X-ray Proportional Counter (LAXPC) detectors on-board AstroSat. LAXPC instrument has three nominally identical detectors to achieve large collecting area. These detectors are independent of each other and in the event analysis mode, they record the arrival time and energy of each photon that is detected. The detectors have a time-resolution of 10 $μ$s and a dead-time of about 42 $μ$s. This makes LAXPC ideal for timing studies. The energy resolution and peak channel to energy map** were obtained from calibration on ground using radioactive sources coupled with GEANT4 simulations of the detectors. The response matrix was further refined from observations of the Crab X-ray source after launch. At around 20 keV the energy resolution of detector is about 10--15\%, while the combined effective area of the 3 detectors is about 6000 cm$^2$. △ Less

Submitted 18 June, 2017; v1 submitted 27 February, 2017; originally announced February 2017.

Comments: Accepted for publication in ApJS

AstroSat CZT Imager observations of GRB 151006A: timing, spectroscopy, and polarisation study

Authors: A. R. Rao, Vikas Chand, M. K. Hingar, S. Iyyani, Rakesh Khanna, A. P. K. Kutty, J. P. Malkar, D. Paul, V. B. Bhalerao, D. Bhattacharya, G. C. Dewangan, Pramod Pawar, A. M. Vibhute, T. Chattopadhyay, N. P. S. Mithun, S. V. Vadawale, N. Vagshette, R. Basak, P. Pradeep, Essy Samuel, S. Sreekumar, P. Vinod, K. H. Navalgund, R. Pandiyan, K. S. Sarma , et al. (2 additional authors not shown)

Abstract: AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift,… ▽ More AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift, spectral parameters similar to that obtained from Fermi/GBM. Hence CZT Imager would be a useful addition to the currently operating GRB instruments (Swift and Fermi). Specifically, we argue that the CZT Imager will be most useful for the short hard GRBs by providing localisation for those detected by Fermi and spectral information for those detected only by Swift. We also provide preliminary results on a new exciting capability of this instrument: CZT Imager is able to identify Compton scattered events thereby providing polarisation information for bright GRBs. GRB 151006A, in spite of being relatively faint, shows hints of a polarisation signal at 100-300 keV (though at a low significance level). We point out that CZT Imager should provide significant time resolved polarisation measurements for GRBs that have fluence 3 times higher than that of GRB 151006A. We estimate that the number of such bright GRBs detectable by CZT Imager is 5 - 6 per year. CZT Imager can also act as a good hard X-ray monitoring device for possible electromagnetic counterparts of Gravitational Wave events. △ Less

Submitted 26 August, 2016; originally announced August 2016.

Comments: Submitted to ApJ

Charged Particle Monitor on the AstroSat mission

Authors: A. R. Rao, M. H. Patil, Yash Bhargava, Rakesh Khanna, M. K. Hingar, A. P. K. Kutty, J. P. Malkar, Rupal Basak, S. Sreekumar, Essy Samuel, P. Priya, P. Vinod, D. Bhattacharya, V. Bhalerao, S. V. Vadawale, N. P. S. Mithun, R. Pandiyan, K. Subbarao, S. Seetha, K. Suryanarayana Sarma

Abstract: Charged Particle Monitor (CPM) on-board the AstroSat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators.… ▽ More Charged Particle Monitor (CPM) on-board the AstroSat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators. Based on the ground calibration results, energy deposition above 1 MeV are accepted and particle counts are recorded. It is found that CPM counts are steady and the signal for the onset and exit of South Atlantic Anomaly (SAA) region are generated in a very reliable and stable manner. △ Less

Submitted 21 August, 2016; originally announced August 2016.

Comments: 9 pages, 8 figures, 5 tables. To appear in JAA special issue on AstroSat

The Cadmium Zinc Telluride Imager on AstroSat

Authors: V. Bhalerao, D. Bhattacharya, A. Vibhute, P. Pawar, A. R. Rao, M. K. Hingar, Rakesh Khanna, A. P. K. Kutty, J. P. Malkar, M. H. Patil, Y. K. Arora, S. Sinha, P. Priya, Essy Samuel, S. Sreekumar, P. Vinod, N. P. S. Mithun, S. V. Vadawale, N. Vagshette, K. H. Navalgund, K. S. Sarma, R. Pandiyan, S. Seetha, K. Subbarao

Abstract: The Cadmium Zinc Telluride Imager (CZTI) is a high energy, wide-field imaging instrument on AstroSat. CZT's namesake Cadmium Zinc Telluride detectors cover an energy range from 20 keV to > 200 keV, with 11% energy resolution at 60 keV. The coded aperture mask attains an angular resolution of 17' over a 4.6 deg x 4.6 deg (FWHM) field of view. CZTI functions as an open detector above 100 keV, contin… ▽ More The Cadmium Zinc Telluride Imager (CZTI) is a high energy, wide-field imaging instrument on AstroSat. CZT's namesake Cadmium Zinc Telluride detectors cover an energy range from 20 keV to > 200 keV, with 11% energy resolution at 60 keV. The coded aperture mask attains an angular resolution of 17' over a 4.6 deg x 4.6 deg (FWHM) field of view. CZTI functions as an open detector above 100 keV, continuously sensitive to GRBs and other transients in about 30% of the sky. The pixellated detectors are sensitive to polarisation above ~100 keV, with exciting possibilities for polarisation studies of transients and bright persistent sources. In this paper, we provide details of the complete CZTI instrument, detectors, coded aperture mask, mechanical and electronic configuration, as well as data and products. △ Less

Submitted 11 August, 2016; originally announced August 2016.

Comments: 9 pages, 6 figures, 1 table. To appear in Astrosat special issue of the Journal of Astronomy and Astrophysics