Showing 1–50 of 132 results for author: Pandey, N

Sparse High Rank Adapters

Authors: Kartikeya Bhardwaj, Nilesh Prasad Pandey, Sweta Priyadarshi, Viswanath Ganapathy, Rafael Esteves, Shreya Kadambi, Shubhankar Borse, Paul Whatmough, Risheek Garrepalli, Mart Van Baalen, Harris Teague, Markus Nagel

Abstract: Low Rank Adaptation (LoRA) has gained massive attention in the recent generative AI research. One of the main advantages of LoRA is its ability to be fused with pretrained models adding no overhead during inference. However, from a mobile deployment standpoint, we can either avoid inference overhead in the fused mode but lose the ability to switch adapters rapidly, or suffer significant (up to 30%… ▽ More Low Rank Adaptation (LoRA) has gained massive attention in the recent generative AI research. One of the main advantages of LoRA is its ability to be fused with pretrained models adding no overhead during inference. However, from a mobile deployment standpoint, we can either avoid inference overhead in the fused mode but lose the ability to switch adapters rapidly, or suffer significant (up to 30% higher) inference latency while enabling rapid switching in the unfused mode. LoRA also exhibits concept-loss when multiple adapters are used concurrently. In this paper, we propose Sparse High Rank Adapters (SHiRA), a new paradigm which incurs no inference overhead, enables rapid switching, and significantly reduces concept-loss. Specifically, SHiRA can be trained by directly tuning only 1-2% of the base model weights while leaving others unchanged. This results in a highly sparse adapter which can be switched directly in the fused mode. We further provide theoretical and empirical insights on how high sparsity in SHiRA can aid multi-adapter fusion by reducing concept loss. Our extensive experiments on LVMs and LLMs demonstrate that finetuning only a small fraction of the parameters in the base model is sufficient for many tasks while enabling both rapid switching and multi-adapter fusion. Finally, we provide a latency- and memory-efficient SHiRA implementation based on Parameter-Efficient Finetuning (PEFT) Library. This implementation trains at nearly the same speed as LoRA while consuming lower peak GPU memory, thus making SHiRA easy to adopt for practical use cases. △ Less

Submitted 18 June, 2024; originally announced June 2024.

FouRA: Fourier Low Rank Adaptation

Authors: Shubhankar Borse, Shreya Kadambi, Nilesh Prasad Pandey, Kartikeya Bhardwaj, Viswanath Ganapathy, Sweta Priyadarshi, Risheek Garrepalli, Rafael Esteves, Munawar Hayat, Fatih Porikli

Abstract: While Low-Rank Adaptation (LoRA) has proven beneficial for efficiently fine-tuning large models, LoRA fine-tuned text-to-image diffusion models lack diversity in the generated images, as the model tends to copy data from the observed training samples. This effect becomes more pronounced at higher values of adapter strength and for adapters with higher ranks which are fine-tuned on smaller datasets… ▽ More While Low-Rank Adaptation (LoRA) has proven beneficial for efficiently fine-tuning large models, LoRA fine-tuned text-to-image diffusion models lack diversity in the generated images, as the model tends to copy data from the observed training samples. This effect becomes more pronounced at higher values of adapter strength and for adapters with higher ranks which are fine-tuned on smaller datasets. To address these challenges, we present FouRA, a novel low-rank method that learns projections in the Fourier domain along with learning a flexible input-dependent adapter rank selection strategy. Through extensive experiments and analysis, we show that FouRA successfully solves the problems related to data copying and distribution collapse while significantly improving the generated image quality. We demonstrate that FouRA enhances the generalization of fine-tuned models thanks to its adaptive rank selection. We further show that the learned projections in the frequency domain are decorrelated and prove effective when merging multiple adapters. While FouRA is motivated for vision tasks, we also demonstrate its merits for language tasks on the GLUE benchmark. △ Less

Submitted 13 June, 2024; originally announced June 2024.

A Study of Optimizations for Fine-tuning Large Language Models

Authors: Arjun Singh, Nikhil Pandey, Anup Shirgaonkar, Pavan Manoj, Vijay Aski

Abstract: Fine-tuning large language models is a popular choice among users trying to adapt them for specific applications. However, fine-tuning these models is a demanding task because the user has to examine several factors, such as resource budget, runtime, model size and context length among others. A specific challenge is that fine-tuning is memory intensive, imposing constraints on the required hardwa… ▽ More Fine-tuning large language models is a popular choice among users trying to adapt them for specific applications. However, fine-tuning these models is a demanding task because the user has to examine several factors, such as resource budget, runtime, model size and context length among others. A specific challenge is that fine-tuning is memory intensive, imposing constraints on the required hardware memory and context length of training data that can be handled. In this work, we share a detailed study on a variety of fine-tuning optimizations across different fine-tuning scenarios. In particular, we assess Gradient Checkpointing, Low-Rank Adaptation, DeepSpeed's Zero Redundancy Optimizer and FlashAttention. With a focus on memory and runtime, we examine the impact of different optimization combinations on GPU memory usage and execution runtime during fine-tuning phase. We provide our recommendation on the best default optimization for balancing memory and runtime across diverse model sizes. We share effective strategies for fine-tuning very large models with tens or hundreds of billions of parameters and enabling large context lengths during fine-tuning. Furthermore, we propose the appropriate optimization mixtures for fine-tuning under GPU resource limitations. △ Less

Submitted 6 June, 2024; v1 submitted 4 June, 2024; originally announced June 2024.

Comments: 10 pages, 4 figures. Revised text for clarity, updated references

Oh! We Freeze: Improving Quantized Knowledge Distillation via Signal Propagation Analysis for Large Language Models

Authors: Kartikeya Bhardwaj, Nilesh Prasad Pandey, Sweta Priyadarshi, Kyunggeun Lee, Jun Ma, Harris Teague

Abstract: Large generative models such as large language models (LLMs) and diffusion models have revolutionized the fields of NLP and computer vision respectively. However, their slow inference, high computation and memory requirement makes it challenging to deploy them on edge devices. In this study, we propose a light-weight quantization aware fine tuning technique using knowledge distillation (KD-QAT) to… ▽ More Large generative models such as large language models (LLMs) and diffusion models have revolutionized the fields of NLP and computer vision respectively. However, their slow inference, high computation and memory requirement makes it challenging to deploy them on edge devices. In this study, we propose a light-weight quantization aware fine tuning technique using knowledge distillation (KD-QAT) to improve the performance of 4-bit weight quantized LLMs using commonly available datasets to realize a popular language use case, on device chat applications. To improve this paradigm of finetuning, as main contributions, we provide insights into stability of KD-QAT by empirically studying the gradient propagation during training to better understand the vulnerabilities of KD-QAT based approaches to low-bit quantization errors. Based on our insights, we propose ov-freeze, a simple technique to stabilize the KD-QAT process. Finally, we experiment with the popular 7B LLaMAv2-Chat model at 4-bit quantization level and demonstrate that ov-freeze results in near floating point precision performance, i.e., less than 0.7% loss of accuracy on Commonsense Reasoning benchmarks. △ Less

Submitted 28 March, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: Accepted at Practical ML for Low Resource Settings Workshop at ICLR 2024

Feature Selection using the concept of Peafowl Mating in IDS

Authors: Partha Ghosh, Joy Sharma, Nilesh Pandey

Abstract: Cloud computing has high applicability as an Internet based service that relies on sharing computing resources. Cloud computing provides services that are Infrastructure based, Platform based and Software based. The popularity of this technology is due to its superb performance, high level of computing ability, low cost of services, scalability, availability and flexibility. The obtainability and… ▽ More Cloud computing has high applicability as an Internet based service that relies on sharing computing resources. Cloud computing provides services that are Infrastructure based, Platform based and Software based. The popularity of this technology is due to its superb performance, high level of computing ability, low cost of services, scalability, availability and flexibility. The obtainability and openness of data in cloud environment make it vulnerable to the world of cyber-attacks. To detect the attacks Intrusion Detection System is used, that can identify the attacks and ensure information security. Such a coherent and proficient Intrusion Detection System is proposed in this paper to achieve higher certainty levels regarding safety in cloud environment. In this paper, the mating behavior of peafowl is incorporated into an optimization algorithm which in turn is used as a feature selection algorithm. The algorithm is used to reduce the huge size of cloud data so that the IDS can work efficiently on the cloud to detect intrusions. The proposed model has been experimented with NSL-KDD dataset as well as Kyoto dataset and have proved to be a better as well as an efficient IDS. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Journal ref: International Journal of Computer Networks & Communications (IJCNC) Vol.16, No.1, January 2024

MUSTAN: Multi-scale Temporal Context as Attention for Robust Video Foreground Segmentation

Authors: Praveen Kumar Pokala, Jaya Sai Kiran Patibandla, Naveen Kumar Pandey, Balakrishna Reddy Pailla

Abstract: Video foreground segmentation (VFS) is an important computer vision task wherein one aims to segment the objects under motion from the background. Most of the current methods are image-based, i.e., rely only on spatial cues while ignoring motion cues. Therefore, they tend to overfit the training data and don't generalize well to out-of-domain (OOD) distribution. To solve the above problem, prior w… ▽ More Video foreground segmentation (VFS) is an important computer vision task wherein one aims to segment the objects under motion from the background. Most of the current methods are image-based, i.e., rely only on spatial cues while ignoring motion cues. Therefore, they tend to overfit the training data and don't generalize well to out-of-domain (OOD) distribution. To solve the above problem, prior works exploited several cues such as optical flow, background subtraction mask, etc. However, having a video data with annotations like optical flow is a challenging task. In this paper, we utilize the temporal information and the spatial cues from the video data to improve OOD performance. However, the challenge lies in how we model the temporal information given the video data in an interpretable way creates a very noticeable difference. We therefore devise a strategy that integrates the temporal context of the video in the development of VFS. Our approach give rise to deep learning architectures, namely MUSTAN1 and MUSTAN2 and they are based on the idea of multi-scale temporal context as an attention, i.e., aids our models to learn better representations that are beneficial for VFS. Further, we introduce a new video dataset, namely Indoor Surveillance Dataset (ISD) for VFS. It has multiple annotations on a frame level such as foreground binary mask, depth map, and instance semantic annotations. Therefore, ISD can benefit other computer vision tasks. We validate the efficacy of our architectures and compare the performance with baselines. We demonstrate that proposed methods significantly outperform the benchmark methods on OOD. In addition, the performance of MUSTAN2 is significantly improved on certain video categories on OOD data due to ISD. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 10 pages, 8 figures

Transient RFI environment of LOFAR-LBA at 72-75 MHz: Impact on ultra-widefield AARTFAAC Cosmic Explorer observations of the redshifted 21-cm signal

Authors: B. K. Gehlot, L. V. E. Koopmans, S. A. Brackenhoff, E. Ceccotti, S. Ghosh, C. Höfer, F. G. Mertens, M. Mevius, S. Munshi, A. R. Offringa, V. N. Pandey, A. Rowlinson, A. Shulevski, R. A. M. J. Wijers, S. Yatawatta, S. Zaroubi

Abstract: Measurement of the redshifted 21-cm signal of neutral hydrogen from the Cosmic Dawn (CD) and Epoch of Reionisation (EoR) promises to unveil a wealth of information about the astrophysical processes during the first billion years of evolution of the universe. The AARTFAAC Cosmic Explorer (ACE) utilises the AARTFAAC wide-field imager of LOFAR to measure the power spectrum of the intensity fluctuatio… ▽ More Measurement of the redshifted 21-cm signal of neutral hydrogen from the Cosmic Dawn (CD) and Epoch of Reionisation (EoR) promises to unveil a wealth of information about the astrophysical processes during the first billion years of evolution of the universe. The AARTFAAC Cosmic Explorer (ACE) utilises the AARTFAAC wide-field imager of LOFAR to measure the power spectrum of the intensity fluctuations of the redshifted 21-cm signal from the CD at z~18. The RFI from various sources contaminates the observed data and it is crucial to exclude the RFI-affected data in the analysis for reliable detection. In this work, we investigate the impact of non-ground-based transient RFI using cross-power spectra and cross-coherence metrics to assess the correlation of RFI over time and investigate the level of impact of transient RFI on the ACE 21-cm power spectrum estimation. We detected moving sky-based transient RFI sources that cross the field of view within a few minutes and appear to be mainly from aeroplane communication beacons at the location of the LOFAR core in the 72-75 MHz band, by inspecting filtered images. This transient RFI is mostly uncorrelated over time and is only expected to dominate over the thermal noise for an extremely deep integration time of 3000 hours or more with a hypothetical instrument that is sky temperature dominated at 75 MHz. We find no visible correlation over different k-modes in Fourier space in the presence of noise for realistic thermal noise scenarios. We conclude that the sky-based transient RFI from aeroplanes, satellites and meteorites at present does not pose a significant concern for the ACE analyses at the current level of sensitivity and after integrating over the available 500 hours of observed data. However, it is crucial to mitigate or filter such transient RFI for more sensitive experiments aiming for significantly deeper integration. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 13 pages, 9 figures, and 3 tables; accepted for publication in Astronomy and Astrophysics (A&A)

Journal ref: A&A 681, A71 (2024)

ESRO: Experience Assisted Service Reliability against Outages

Authors: Sarthak Chakraborty, Shubham Agarwal, Shaddy Garg, Abhimanyu Sethia, Udit Narayan Pandey, Videh Aggarwal, Shiv Saini

Abstract: Modern cloud services are prone to failures due to their complex architecture, making diagnosis a critical process. Site Reliability Engineers (SREs) spend hours leveraging multiple sources of data, including the alerts, error logs, and domain expertise through past experiences to locate the root cause(s). These experiences are documented as natural language text in outage reports for previous out… ▽ More Modern cloud services are prone to failures due to their complex architecture, making diagnosis a critical process. Site Reliability Engineers (SREs) spend hours leveraging multiple sources of data, including the alerts, error logs, and domain expertise through past experiences to locate the root cause(s). These experiences are documented as natural language text in outage reports for previous outages. However, utilizing the raw yet rich semi-structured information in the reports systematically is time-consuming. Structured information, on the other hand, such as alerts that are often used during fault diagnosis, is voluminous and requires expert knowledge to discern. Several strategies have been proposed to use each source of data separately for root cause analysis. In this work, we build a diagnostic service called ESRO that recommends root causes and remediation for failures by utilizing structured as well as semi-structured sources of data systematically. ESRO constructs a causal graph using alerts and a knowledge graph using outage reports, and merges them in a novel way to form a unified graph during training. A retrieval-based mechanism is then used to search the unified graph and rank the likely root causes and remediation techniques based on the alerts fired during an outage at inference time. Not only the individual alerts, but their respective importance in predicting an outage group is taken into account during recommendation. We evaluated our model on several cloud service outages of a large SaaS enterprise over the course of ~2 years, and obtained an average improvement of 27% in rouge scores after comparing the likely root causes against the ground truth over state-of-the-art baselines. We further establish the effectiveness of ESRO through qualitative analysis on multiple real outage examples. △ Less

Submitted 13 September, 2023; originally announced September 2023.

Comments: Accepted to 38th IEEE/ACM International Conference on Automated Software Engineering (ASE 2023)

Softmax Bias Correction for Quantized Generative Models

Authors: Nilesh Prasad Pandey, Marios Fournarakis, Chirag Patel, Markus Nagel

Abstract: Post-training quantization (PTQ) is the go-to compression technique for large generative models, such as stable diffusion or large language models. PTQ methods commonly keep the softmax activation in higher precision as it has been shown to be very sensitive to quantization noise. However, this can lead to a significant runtime and power overhead during inference on resource-constraint edge device… ▽ More Post-training quantization (PTQ) is the go-to compression technique for large generative models, such as stable diffusion or large language models. PTQ methods commonly keep the softmax activation in higher precision as it has been shown to be very sensitive to quantization noise. However, this can lead to a significant runtime and power overhead during inference on resource-constraint edge devices. In this work, we investigate the source of the softmax sensitivity to quantization and show that the quantization operation leads to a large bias in the softmax output, causing accuracy degradation. To overcome this issue, we propose an offline bias correction technique that improves the quantizability of softmax without additional compute during deployment, as it can be readily absorbed into the quantization parameters. We demonstrate the effectiveness of our method on stable diffusion v1.5 and 125M-size OPT language model, achieving significant accuracy improvement for 8-bit quantized softmax. △ Less

Submitted 4 September, 2023; originally announced September 2023.

A novel radio imaging method for physical spectral index modelling

Authors: E. Ceccotti, A. R. Offringa, L. V. E. Koopmans, R. Timmerman, S. A. Brackenhoff, B. K. Gehlot, F. G. Mertens, S. Munshi, V. N. Pandey, R. J. van Weeren, S. Yatawatta, S. Zaroubi

Abstract: We present a new method, called "forced-spectrum fitting", for physically-based spectral modelling of radio sources during deconvolution. This improves upon current common deconvolution fitting methods, which often produce inaccurate spectra. Our method uses any pre-existing spectral index map to assign spectral indices to each model component cleaned during the multi-frequency deconvolution of WS… ▽ More We present a new method, called "forced-spectrum fitting", for physically-based spectral modelling of radio sources during deconvolution. This improves upon current common deconvolution fitting methods, which often produce inaccurate spectra. Our method uses any pre-existing spectral index map to assign spectral indices to each model component cleaned during the multi-frequency deconvolution of WSClean, where the pre-determined spectrum is fitted. The component magnitude is evaluated by performing a modified weighted linear least-squares fit. We test this method on a simulated LOFAR-HBA observation of the 3C196 QSO and a real LOFAR-HBA observation of the 4C+55.16 FRI galaxy. We compare the results from the forced-spectrum fitting with traditional joined-channel deconvolution using polynomial fitting. Because no prior spectral information was available for 4C+55.16, we demonstrate a method for extracting spectral indices in the observed frequency band using "clustering". The models generated by the forced-spectrum fitting are used to improve the calibration of the datasets. The final residuals are comparable to existing multi-frequency deconvolution methods, but the output model agrees with the provided spectral index map, embedding correct spectral information. While forced-spectrum fitting does not solve the determination of the spectral information itself, it enables the construction of accurate multi-frequency models that can be used for wide-band calibration and subtraction. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Comments: 17 pages, 9 figures, 5 tables. Accepted for publication in MNRAS

Nitsche method for Navier-Stokes equations with slip boundary conditions: Convergence analysis and VMS-LES stabilization

Authors: Aparna Bansal, Nicolás Alejandro Barnafi, Dwijendra Narain Pandey

Abstract: In this paper, we analyze the Nitsche's method for the stationary Navier-Stokes equations on Lipschitz domains under minimal regularity assumptions. Our analysis provides a robust formulation for implementing slip (i.e. Navier) boundary conditions in arbitrarily complex boundaries. The well-posedness of the discrete problem is established using the Banach Nečas Babuška and the Banach fixed point t… ▽ More In this paper, we analyze the Nitsche's method for the stationary Navier-Stokes equations on Lipschitz domains under minimal regularity assumptions. Our analysis provides a robust formulation for implementing slip (i.e. Navier) boundary conditions in arbitrarily complex boundaries. The well-posedness of the discrete problem is established using the Banach Nečas Babuška and the Banach fixed point theorems under standard small data assumptions, and we also provide optimal convergence rates for the approximation error. Furthermore, we propose a VMS-LES stabilized formulation, which allows the simulation of incompressible fluids at high Reynolds numbers. We validate our theory through numerous numerical tests in well established benchmark problems. △ Less

Submitted 18 July, 2023; v1 submitted 7 July, 2023; originally announced July 2023.

MSC Class: 65N30; 65N12; 65N15; 65J15; 80A20; 76D07

Optimal Control and Approximate controllability of fractional semilinear differential inclusion involving $ψ$- Hilfer fractional derivatives

Authors: Bholanath Kumbhakar, Dwijendra Narain Pandey

Abstract: The current paper initially studies the optimal control of linear $ψ$-Hilfer fractional derivatives with state-dependent control constraints and optimal control for a particular type of cost functional. Then, we investigate the approximate controllability of the abstract fractional semilinear differential inclusion involving $ψ$-Hilfer fractional derivative in reflexive Banach spaces. It is known… ▽ More The current paper initially studies the optimal control of linear $ψ$-Hilfer fractional derivatives with state-dependent control constraints and optimal control for a particular type of cost functional. Then, we investigate the approximate controllability of the abstract fractional semilinear differential inclusion involving $ψ$-Hilfer fractional derivative in reflexive Banach spaces. It is known that the existence, uniqueness, optimal control, and approximate controllability of fractional differential equations or inclusions have been demonstrated for a similar type of fractional differential equations or inclusions with different fractional order derivative operators. Hence it has to research fractional differential equations with more general fractional operators which incorporate all the specific fractional derivative operators. This motivates us to consider the $ψ$-Hilfer fractional differential inclusion. We assume the compactness of the corresponding semigroup and the approximate controllability of the associated linear control system and define the control with the help of duality map**. We observe that convexity is essential in determining the controllability property of semilinear differential inclusion. In the case of Hilbert spaces, there is no issue of convexity as the duality map becomes simply the identity map. In contrast to Hilbert spaces, if we consider reflexive Banach spaces, there is an issue of convexity due to the nonlinear nature of duality map**. The novelty of this paper is that we overcome this convexity issue and establish our main result. Finally, we test our outcomes through an example. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Comments: 39 pages

MSC Class: 34A08; 93B05; 49J20

A Practical Mixed Precision Algorithm for Post-Training Quantization

Authors: Nilesh Prasad Pandey, Markus Nagel, Mart van Baalen, Yin Huang, Chirag Patel, Tijmen Blankevoort

Abstract: Neural network quantization is frequently used to optimize model size, latency and power consumption for on-device deployment of neural networks. In many cases, a target bit-width is set for an entire network, meaning every layer get quantized to the same number of bits. However, for many networks some layers are significantly more robust to quantization noise than others, leaving an important axi… ▽ More Neural network quantization is frequently used to optimize model size, latency and power consumption for on-device deployment of neural networks. In many cases, a target bit-width is set for an entire network, meaning every layer get quantized to the same number of bits. However, for many networks some layers are significantly more robust to quantization noise than others, leaving an important axis of improvement unused. As many hardware solutions provide multiple different bit-width settings, mixed-precision quantization has emerged as a promising solution to find a better performance-efficiency trade-off than homogeneous quantization. However, most existing mixed precision algorithms are rather difficult to use for practitioners as they require access to the training data, have many hyper-parameters to tune or even depend on end-to-end retraining of the entire model. In this work, we present a simple post-training mixed precision algorithm that only requires a small unlabeled calibration dataset to automatically select suitable bit-widths for each layer for desirable on-device performance. Our algorithm requires no hyper-parameter tuning, is robust to data variation and takes into account practical hardware deployment constraints making it a great candidate for practical use. We experimentally validate our proposed method on several computer vision tasks, natural language processing tasks and many different networks, and show that we can find mixed precision networks that provide a better trade-off between accuracy and efficiency than their homogeneous bit-width equivalents. △ Less

Submitted 10 February, 2023; originally announced February 2023.

On the Interpretability of Attention Networks

Authors: Lakshmi Narayan Pandey, Rahul Vashisht, Harish G. Ramaswamy

Abstract: Attention mechanisms form a core component of several successful deep learning architectures, and are based on one key idea: ''The output depends only on a small (but unknown) segment of the input.'' In several practical applications like image captioning and language translation, this is mostly true. In trained models with an attention mechanism, the outputs of an intermediate module that encodes… ▽ More Attention mechanisms form a core component of several successful deep learning architectures, and are based on one key idea: ''The output depends only on a small (but unknown) segment of the input.'' In several practical applications like image captioning and language translation, this is mostly true. In trained models with an attention mechanism, the outputs of an intermediate module that encodes the segment of input responsible for the output is often used as a way to peek into the `reasoning` of the network. We make such a notion more precise for a variant of the classification problem that we term selective dependence classification (SDC) when used with attention model architectures. Under such a setting, we demonstrate various error modes where an attention model can be accurate but fail to be interpretable, and show that such models do occur as a result of training. We illustrate various situations that can accentuate and mitigate this behaviour. Finally, we use our objective definition of interpretability for SDC tasks to evaluate a few attention model learning algorithms designed to encourage sparsity and demonstrate that these algorithms help improve interpretability. △ Less

Submitted 14 May, 2023; v1 submitted 30 December, 2022; originally announced December 2022.

Comments: ACML 2022,PMLR, Volume 189, https://proceedings.mlr.press/v189/pandey23a/pandey23a.pdf

Journal ref: Proceedings of The 14th Asian Conference on Machine, 832--847, 2023, Volume:189; PMLR

Conoscopic interferometry for optimal acoustic pulse detection in ultrafast acoustics

Authors: Martin Robin, Ruben Guis, Mustafa Umit Arabul, Zili Zhou, Nitesh Pandey, Gerard J. Verbiest

Abstract: Conoscopic interferometry is a promising detection technique for ultrafast acoustics. By focusing a probe beam through a birefringent crystal before passing it through a polarizer, conoscopic interferences sculpt the spatial profile of the beam. The use of these patterns for acoustic wave detection revealed a higher detection sensitivity over existing techniques, such as reflectometry and beam dis… ▽ More Conoscopic interferometry is a promising detection technique for ultrafast acoustics. By focusing a probe beam through a birefringent crystal before passing it through a polarizer, conoscopic interferences sculpt the spatial profile of the beam. The use of these patterns for acoustic wave detection revealed a higher detection sensitivity over existing techniques, such as reflectometry and beam distortion detection. However, the physical origin of the increased sensitivity is unknown. In this work, we present a model, describing the sensitivity behaviour of conoscopic interferometry with respect to the quarter-wave plate orientation and the diaphragm aperture, which is validated experimentally. Using the model, we optimize the detection sensitivity of conoscopic interferometry. We obtain a maximal sensitivity of detection when placing the diaphragm edge on the dark fringes of the conoscopic interference patterns. In the configurations studied in this work, conoscopic interferometry can be 8x more sensitive to acoustic waves than beam distortion detection. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Schwinger-Keldysh path integral formalism for a Quenched Quantum Inverted Oscillator

Authors: Sayantan Choudhury, Suman Dey, Rakshit Mandish Gharat, Saptarshi Mandal, Nilesh Pandey

Abstract: In this work, we study the time-dependent behaviour of quantum correlations of a system of an inverted oscillator governed by out-of-equilibrium dynamics using the well-known Schwinger-Keldysh formalism in presence of quantum mechanical quench. Considering a generalized structure of a time-dependent Hamiltonian for an inverted oscillator system, we use the invariant operator method to obtain its e… ▽ More In this work, we study the time-dependent behaviour of quantum correlations of a system of an inverted oscillator governed by out-of-equilibrium dynamics using the well-known Schwinger-Keldysh formalism in presence of quantum mechanical quench. Considering a generalized structure of a time-dependent Hamiltonian for an inverted oscillator system, we use the invariant operator method to obtain its eigenstates and continuous energy eigenvalues. Using the expression for the eigenstates, we further derive the most general expression for the generating function as well as the out-of-time-ordered correlators (OTOC) for the given system using this formalism. Further, considering the time-dependent coupling and frequency of the quantum inverted oscillator characterized by quench parameters, we comment on the dynamical behaviour, specifically the early, intermediate and late time-dependent features of the OTOC for the quenched quantum inverted oscillator. Next, we study a specific case, where the system of inverted oscillator exhibits chaotic behaviour by computing the quantum Lyapunov exponent from the time-dependent behaviour of OTOC in presence of the given quench profile. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Comments: 25 pages, 8 figures

Assessing the impact of two independent direction-dependent calibration algorithms on the LOFAR 21-cm signal power spectrum

Authors: H. Gan, F. G. Mertens, L. V. E. Koopmans, A. R. Offringa, M. Mevius, V. N. Pandey, S. A. Brackenhoff, E. Ceccotti, B. Ciardi, B. K. Gehlot, R. Ghara, S. K. Giri, I. T. Iliev, S. Munshi

Abstract: Detecting the 21-cm signal from the Epoch of Reionisation (EoR) is challenging due to the strong astrophysical foregrounds, ionospheric effects, radio frequency interference and instrumental effects. Understanding and calibrating these effects are crucial for the detection. In this work, we introduce a newly developed direction-dependent (DD) calibration algorithm DDECAL and compare its performanc… ▽ More Detecting the 21-cm signal from the Epoch of Reionisation (EoR) is challenging due to the strong astrophysical foregrounds, ionospheric effects, radio frequency interference and instrumental effects. Understanding and calibrating these effects are crucial for the detection. In this work, we introduce a newly developed direction-dependent (DD) calibration algorithm DDECAL and compare its performance with an existing algorithm, SAGECAL, in the context of the LOFAR-EoR 21-cm power spectrum experiment. In our data set, the North Celestial Pole (NCP) and its flanking fields were observed simultaneously. We analyse the NCP and one of its flanking fields. The NCP field is calibrated by the standard pipeline, using SAGECAL with an extensive sky model and 122 directions, and the flanking field is calibrated by DDECAL and SAGECAL with a simpler sky model and 22 directions. Additionally, two strategies are used for subtracting Cassiopeia A and Cygnus A. The results show that DDECAL performs better at subtracting sources in the primary beam region due to the application of a beam model, while SAGECAL performs better at subtracting Cassiopeia A and Cygnus A. This indicates that including a beam model during DD calibration significantly improves the performance. The benefit is obvious in the primary beam region. We also compare the 21-cm power spectra on two different fields. The results show that the flanking field produces better upper limits compared to the NCP in this particular observation. Despite the minor differences between DDECAL and SAGECAL due to the beam application, we find that the two algorithms yield comparable 21-cm power spectra on the LOFAR-EoR data after foreground removal. Hence, the current LOFAR-EoR 21-cm power spectrum limits are not likely to depend on the DD calibration method. △ Less

Submitted 16 September, 2022; originally announced September 2022.

Comments: 28 pages, 14 figures, accepted for publication in A&A

Journal ref: A&A 669, A20 (2023)

Circuit Complexity in an interacting quenched Quantum Field Theory

Authors: Sayantan Choudhury, Rakshit Mandish Gharat, Saptarshi Mandal, Nilesh Pandey

Abstract: In this work, we explore the effects of a quantum quench on the circuit complexity for a quenched quantum field theory having weakly coupled quartic interaction. We use the invariant operator method, under a perturbative framework, for computing the ground state of this system}. We give the analytical expressions for specific reference and target states using the ground state of the system. Using… ▽ More In this work, we explore the effects of a quantum quench on the circuit complexity for a quenched quantum field theory having weakly coupled quartic interaction. We use the invariant operator method, under a perturbative framework, for computing the ground state of this system}. We give the analytical expressions for specific reference and target states using the ground state of the system. Using a particular cost functional, we show the analytical computation of circuit complexity for the quenched and interacting field theory. Further, we give a numerical estimate of circuit complexity with respect to the quench rate, $δt$ for two coupled oscillators. The parametric variation of the unambiguous contribution of the circuit complexity for an arbitrary number of oscillators has been studied with respect to the dimensionless parameter $(t/δt$). We comment on the variation of circuit complexity for different values of coupling strength, different number of oscillators, and even in different dimensions. △ Less

Submitted 5 March, 2023; v1 submitted 7 September, 2022; originally announced September 2022.

Comments: 17 pages, 4 figures, Revised version, Accepted for publication in Symmetry (section: Physics and Symmetry/Asymmetry, Special issue: "Symmetry and Asymmetry in Quantum Mechanics")

Journal ref: Symmetry 2023, 15(3), 655

Entanglement in interacting quenched two-body coupled oscillator system

Authors: Sayantan Choudhury, Rakshit Mandish Gharat, Saptarshi Mandal, Nilesh Pandey, Abhishek Roy, Partha Sarker

Abstract: In this work, we explore the effects of a quantum quench on the entanglement measures of a two-body coupled oscillator system having quartic interaction. We use the invariant operator method, under a perturbative framework, for computing the ground state of this system. We give the analytical expressions for the total and reduced density matrix of the system having non-Gaussian, quartic interactio… ▽ More In this work, we explore the effects of a quantum quench on the entanglement measures of a two-body coupled oscillator system having quartic interaction. We use the invariant operator method, under a perturbative framework, for computing the ground state of this system. We give the analytical expressions for the total and reduced density matrix of the system having non-Gaussian, quartic interaction terms. Using this reduced density matrix, we show the analytical calculation of two entanglement measures viz., Von Neumann entanglement entropy using replica trick and Renyi entanglement entropy. Further, we give a numerical estimate of these entanglement measures with respect to the dimensionless parameter $(t/δt$) and show its behaviour in the three regimes, i.e; late time behaviour, around the quench point and the early time behaviour. We comment on the variation of these entanglement measures for different orders of coupling strength. The variation of Renyi entropy of different orders has also been discussed. △ Less

Submitted 27 June, 2022; v1 submitted 11 April, 2022; originally announced April 2022.

Comments: 20 pages, 4 figures, Title changed, Revised version, Accepted for publication in Physical Review D

Journal ref: Phys. Rev. D 106, 025002 (2022)

Four-mode squeezed states in de Sitter space: A study with two field interacting quantum system

Authors: Sayantan Choudhury, Sudhakar Panda, Nilesh Pandey, Abhishek Roy

Abstract: In this paper we study the application of four-mode squeezed states in the cosmological context, studying two weakly coupled scalar fields in the planar patch of the de Sitter space. We construct the four-mode squeezed state formalism and connect this concept with the Hamiltonian of the two coupled inverted harmonic oscillators having a time-dependent effective frequency in the planar patch of the… ▽ More In this paper we study the application of four-mode squeezed states in the cosmological context, studying two weakly coupled scalar fields in the planar patch of the de Sitter space. We construct the four-mode squeezed state formalism and connect this concept with the Hamiltonian of the two coupled inverted harmonic oscillators having a time-dependent effective frequency in the planar patch of the de Sitter space. Further, the corresponding evolution operator for the quantum Euclidean vacuum state has been constructed, which captures its dynamics. Using the Heisenberg picture coupled differential equations describing the time evolution for all squeezing parameters (amplitude, phase and angle) have been obtained, for the weakly coupled two scalar field model. With the help of these evolutions for the coupled system, we simulate the dynamics of the squeezing parameters in terms of conformal time. From our analysis, we observe interesting dynamics, which helps us to explore various underlying physical implications of the weakly coupled two scalar field system in the planar patch of the de Sitter cosmological background. △ Less

Submitted 21 August, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Comments: 22 pages, 6 figures, Accepted for publication in Fortschritte der Physik - Progress of Physics

Journal ref: Fortsch.Phys. 70 (2022) 12, 2200124

Static negative susceptibility in ferromagnetic material induced by domain wall motion: an aspect of superconductor state

Authors: Nilesh Pandey, Yogesh Singh Chauhan

Abstract: Domain wall motion in magnetic materiel induces the negative susceptibility leading to a perfect diamagnetism state. The local susceptibility is calculated by the derivative of magnetization ($\vec{M}$) vector w.r.t. magnetic field strength ($\vec{H}$) vector. In the transient region from the upward domain to the downward domain (domain wall width), local $\vec{M}$ and $\vec{H}$ vectors exhibit op… ▽ More Domain wall motion in magnetic materiel induces the negative susceptibility leading to a perfect diamagnetism state. The local susceptibility is calculated by the derivative of magnetization ($\vec{M}$) vector w.r.t. magnetic field strength ($\vec{H}$) vector. In the transient region from the upward domain to the downward domain (domain wall width), local $\vec{M}$ and $\vec{H}$ vectors exhibit opposite slopes, which leads to a negative susceptibility value. A negative susceptibility value induces the diamagnetism effect leading to a relative permeability value $<$ 1 $\left(μ_r < 1\right)$. This diamagnetism sate originates due to the domain wall motion, which is an entirely different mechanism from the electron motion's induced diamagnetism. Furthermore, the strength of the diamagnetism state can be enhanced by tuning the gradient energy of a domain that may correspond to a perfect diamagnetism state $\left(χ_v \approx -1 \Rightarrow μ_r \rightarrow 0\right)$. Besides, we believe that there may be a possibility of sustaining such a diamagnetic state (domain wall induced) in a ferromagnetic material that is utterly contradictory to the conventional theory. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Statistical analysis of the causes of excess variance in the 21 cm signal power spectra obtained with the Low-Frequency Array

Authors: H. Gan, L. V. E Koopmans, F. G. Mertens, M. Mevius, A. R. Offringa, B. Ciardi, B. K. Gehlot, R. Ghara, A. Ghosh, S. K. Giri, I. T. Iliev, G. Mellema, V. N. Pandey, S. Zaroubi

Abstract: The detection of the 21 cm signal of neutral hydrogen from the Epoch of Reionization (EoR) is challenging due to bright foreground sources, radio frequency interference (RFI), the ionosphere, and instrumental effects. Even after correcting for these effects in the calibration step and applying foreground removal techniques, the remaining residuals in the observed 21 cm power spectra are still abov… ▽ More The detection of the 21 cm signal of neutral hydrogen from the Epoch of Reionization (EoR) is challenging due to bright foreground sources, radio frequency interference (RFI), the ionosphere, and instrumental effects. Even after correcting for these effects in the calibration step and applying foreground removal techniques, the remaining residuals in the observed 21 cm power spectra are still above the thermal noise, which is referred to as the "excess variance." We study potential causes of this excess variance based on 13 nights of data obtained with the Low-Frequency Array (LOFAR). We focused on the impact of gain errors, the sky model, and ionospheric effects on the excess variance by correlating the relevant parameters such as the gain variance over time or frequency, local sidereal time (LST), diffractive scale, and phase structure-function slope with the level of excess variance. Our analysis shows that excess variance has an LST dependence, which is related to the power from the sky. And the simulated Stokes I power spectra from bright sources and the excess variance show a similar progression over LST with the minimum power appearing at LST bin 6h to 9h. This LST dependence is also present in sky images of the residual Stokes I of the observations. In very-wide sky images, we demonstrate that the extra power comes exactly from the direction of bright and distant sources Cassiopeia A and Cygnus A with the array beam patterns. These results suggest that the level of excess variance in the 21 cm signal power spectra is related to sky effects and, hence, it depends on LST. In particular, very bright and distant sources such as Cassiopeia A and Cygnus A can dominate the effect. This is in line with earlier studies and offers a path forward toward a solution since the correlation between the sky-related effects and the excess variance is non-negligible. △ Less

Submitted 4 March, 2022; originally announced March 2022.

Comments: 29 pages, 14 figures, accepted for publication in A&A

Journal ref: A&A 663, A9 (2022)

Physics and modeling of multi-domain FeFET with domain wall induced Negative Capacitance

Authors: Nilesh Pandey, Yogesh Singh Chauhan

Abstract: In this paper, we present the dynamics and modeling of multi-domains in the ferroelectric FET (FeFET). Due to the periodic texture of domains, the electrostatics of the FeFET exhibit an oscillatory conduction band profile. To capture such oscillations, we solve coupled 2-D Poisson's equation with the net ferroelectric energy density (gradient energy + free energy + depolarization energy) equation.… ▽ More In this paper, we present the dynamics and modeling of multi-domains in the ferroelectric FET (FeFET). Due to the periodic texture of domains, the electrostatics of the FeFET exhibit an oscillatory conduction band profile. To capture such oscillations, we solve coupled 2-D Poisson's equation with the net ferroelectric energy density (gradient energy + free energy + depolarization energy) equation. Multi-domain dynamics are captured by minimizing the net ferroelectric energy leading to a thermodynamically stable state. Furthermore, we show that the motion of domain walls originates local bound charge density in the ferroelectric region, which induces the negative capacitance (NC) effect. The strength of domain wall-induced NC is determined by the gradient energy of the ferroelectric material. FeFET exhibits variability in the drain current with domain period due to the inherent NC effect. Additionally, the impact of domain wall transition (soft$\rightleftharpoons$hard) on the device's electrostatic/transport is also analyzed. The model also accurately captures both nucleations of a new domain and the motion of the domain wall. Furthermore, the model is thoroughly validated against experimental results and phase-field simulations. △ Less

Submitted 25 February, 2022; originally announced February 2022.

Dynamics of Multi-Domains in Ferroelectric Tunnel Junction

Authors: Nilesh Pandey, Yogesh Singh Chauhan

Abstract: The Discovery of giant tunnel electroresistance (TER) in Ferroelectric Tunnel Junction (FTJ) paves a futuristic possibility of utilizing the FTJ as a bistable resistive device with an enormously high ON/OFF ratio. In the last 20 years, numerous studies have reported that the formation of multidomain in ferroelectric material is an inevitable process to minimize the total system energy. Recent stud… ▽ More The Discovery of giant tunnel electroresistance (TER) in Ferroelectric Tunnel Junction (FTJ) paves a futuristic possibility of utilizing the FTJ as a bistable resistive device with an enormously high ON/OFF ratio. In the last 20 years, numerous studies have reported that the formation of multidomain in ferroelectric material is an inevitable process to minimize the total system energy. Recent studies based on phase-field simulations have demonstrated that domain nucleation/motion substantially alters the electrostatics of a ferroelectric material. However, the impact of domain dynamics on quantum transport in FTJ remains elusive. This paper presents a comprehensive study of multidomain dynamics in a ferroelectric tunnel junction. Analysis of this article is twofold; firstly, we study the impact of domain dynamics on electrostatics in an FTJ. Subsequently, the obtained electrostatics is used to study the variations in tunneling current, and TER originated from multidomain dynamics. We show that ON/OFF current density and TER vary locally in the ferroelectric region. Furthermore, the device's electrostatics and quantum transport exhibit an oscillatory nature due to periodic domain texture. ON/OFF current density shows a sine/cosine distribution in ferroelectric, and approximately one-decade local variation in current density is observed. These local fluctuations in current density cause oscillations in the device's ON/OFF ratio. Optimization techniques to achieve a uniform and maximum TER are also discussed. A 2D analytical and explicit model is derived by solving coupled 2D Poisson's equation and Landau-Ginzburg equation. The model incorporates the switching and nucleation of domains by minimizing net ferroelectric energy (depolarization+free+gradient energy density). Furthermore, the impact of the bottom insulator layer on ferroelectric's gradient energy is also studied. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Astronomical data organization, management and access in Scientific Data Lakes

Authors: Y. G. Grange, V. N. Pandey, X. Espinal, R. Di Maria, A. P. Millar

Abstract: The data volumes stored in telescope archives is constantly increasing due to the development and improvements in the instrumentation. Often the archives need to be stored over a distributed storage architecture, provided by independent compute centres. Such a distributed data archive requires overarching data management orchestration. Such orchestration comprises of tools which handle data storag… ▽ More The data volumes stored in telescope archives is constantly increasing due to the development and improvements in the instrumentation. Often the archives need to be stored over a distributed storage architecture, provided by independent compute centres. Such a distributed data archive requires overarching data management orchestration. Such orchestration comprises of tools which handle data storage and cataloguing, and steering transfers integrating different storage systems and protocols, while being aware of data policies and locality. In addition, it needs a common Authorisation and Authentication Infrastructure (AAI) layer which is perceived as a single entity by end users and provides transparent data access. The scientific domain of particle physics also uses complex and distributed data management systems. The experiments at the Large Hadron Collider\,(LHC) accelerator at CERN generate several hundred petabytes of data per year. This data is globally distributed to partner sites and users using national compute facilities. Several innovative tools were developed to successfully address the distributed computing challenges in the context of the Worldwide LHC Computing Grid (WLCG). The work being carried out in the ESCAPE project and in the Data Infrastructure for Open Science (DIOS) work package is to prototype a Scientific Data Lake using the tools developed in the context of the WLCG, harnessing different physics scientific disciplines addressing FAIR standards and Open Data. We present how the Scientific Data Lake prototype is applied to address astronomical data use cases. We introduce the software stack and also discuss some of the differences between the domains. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Comments: 4 pages, 1 figure, to appear in the proceedings of Astronomical Data Analysis Software and Systems XXXI published by ASP

Degree-Scale Galactic Radio Emission at 122 MHz around the North Celestial Pole with LOFAR-AARTFAAC

Authors: B. K. Gehlot, L. V. E. Koopmans, A. R. Offringa, H. Gan, R. Ghara, S. K. Giri, M. Kuiack, F. G. Mertens, M. Mevius, R. Mondal, V. N. Pandey, A. Shulevski, R. A. M. J. Wijers, S. Yatawatta

Abstract: Aims: Contamination from bright diffuse Galactic thermal and non-thermal radio emission poses crucial challenges in experiments aiming to measure the 21-cm signal of neutral hydrogen from the Cosmic Dawn and Epoch of Reionization. If not included in calibration, this diffuse emission can severely impact the analysis and signal extraction in 21-cm experiments. We examine large-scale diffuse Galacti… ▽ More Aims: Contamination from bright diffuse Galactic thermal and non-thermal radio emission poses crucial challenges in experiments aiming to measure the 21-cm signal of neutral hydrogen from the Cosmic Dawn and Epoch of Reionization. If not included in calibration, this diffuse emission can severely impact the analysis and signal extraction in 21-cm experiments. We examine large-scale diffuse Galactic emission at 122~MHz, around the North Celestial Pole, using the AARTFAAC-HBA system. Methods: In this pilot project, we present the first-ever wide-field image produced with a single sub-band of the data recorded with the AARTFAAC-HBA. We demonstrate two methods: multiscale CLEAN and shapelet decomposition, to model the diffuse emission revealed in the image. We use angular power spectrum metrics to quantify different components of the emission and compare the performance of the two diffuse structure modelling approaches. Results: We observe that the point sources dominate the angular power spectrum ($\ell(\ell+1)C_{\ell}/2π\equiv Δ^2(\ell)$) of the emission in the field on scales $\ell\gtrsim 60$ ($\lesssim 3$~degree). The angular power spectrum after subtraction of compact sources is flat within $20\lesssim \ell \lesssim200$ range, suggesting that the residual power is dominated by the diffuse emission on scales $\ell\lesssim200$. The residual diffuse emission has a brightness temperature variance of $Δ^2_{\ell=180} = (145.64 \pm 13.61)~{\rm K}^2$ at 122~MHz on angular scales of 1~degree, and is consistent with a power-law following $C_{\ell}\propto \ell^{-2.0}$ in $20\lesssim \ell \lesssim200$ range. We also find that, in the current setup, the multiscale CLEAN is suitable to model the compact and diffuse structures on a wide range of angular scales, whereas the shapelet decomposition method better models the large scales, which are of the order of a few degrees and wider. △ Less

Submitted 7 April, 2022; v1 submitted 1 December, 2021; originally announced December 2021.

Comments: 11 pages, 9 figures, accepted (A&A)

Journal ref: A&A 662, A97 (2022)

Causality Constraint on Circuit Complexity from $COSMOEFT$

Authors: Sayantan Choudhury, Arghya Mukherjee, Nilesh Pandey, Abhishek Roy

Abstract: In this article, we investigate the physical implications of the causality constraint via effective sound speed $c_s(\leq 1)$ on Quantum Circuit Complexity(QCC) in the framework of Cosmological Effective Field Theory (COSMOEFT) using the two-mode squeezed quantum states. This COSMOEFT setup is constructed using the St$\ddot{\text{u}}$ckelberg trick with the help of the lowest dimensional operators… ▽ More In this article, we investigate the physical implications of the causality constraint via effective sound speed $c_s(\leq 1)$ on Quantum Circuit Complexity(QCC) in the framework of Cosmological Effective Field Theory (COSMOEFT) using the two-mode squeezed quantum states. This COSMOEFT setup is constructed using the St$\ddot{\text{u}}$ckelberg trick with the help of the lowest dimensional operators, which are broken under time diffeomorphism. In this setup, we consider only the contribution from two derivative terms in the background quasi de Sitter metric. Next, we compute the relevant measures of circuit complexity and their cosmological evolution for different $c_s$ by following two different approaches, Nielsen's and Covariance matrix method. Using this setup, we also compute the Von-Neumann and Rényi entropy, which finally establishes an underlying connecting relationship between the entanglement entropy and circuit complexity. Essentially, we study the behaviour of the circuit complexity measures and entanglement entropy with respect to the scale factor and $c_s$ and find various interesting unexplored features within the window, $0.024\leq c_s\leq 1$, which is supported by both causality and cosmological observation. Finally, we also comment on the connection between the circuit complexity, entanglement entropy and equilibrium temperature for different $c_s$ lying within the mentioned window. △ Less

Submitted 25 January, 2023; v1 submitted 22 November, 2021; originally announced November 2021.

Comments: 35 pages, 8 figures, New references updated, Accepted for publication in Fortschritte der Physik - Progress of Physics

Journal ref: Fortsch.Phys. 71 (2023) 4-5, 2200199

A numerical study of 21-cm signal suppression and noise increase in direction-dependent calibration of LOFAR data

Authors: M. Mevius, F. Mertens, L. V. E. Koopmans, A. R. Offringa, S. Yatawatta, M. A. Brentjens, E. Chapman, B. Ciardi, H. Gan, B. K. Gehlot, R. Ghara, A. Ghosh, S. K. Giri, I. T. Iliev, G. Mellema, V. N. Pandey, S. Zaroubi

Abstract: We investigate systematic effects in direction dependent gain calibration in the context of the Low-Frequency Array (LOFAR) 21-cm Epoch of Reionization (EoR) experiment. The LOFAR EoR Key Science Project aims to detect the 21-cm signal of neutral hydrogen on interferometric baselines of $50-250 λ$. We show that suppression of faint signals can effectively be avoided by calibrating these short base… ▽ More We investigate systematic effects in direction dependent gain calibration in the context of the Low-Frequency Array (LOFAR) 21-cm Epoch of Reionization (EoR) experiment. The LOFAR EoR Key Science Project aims to detect the 21-cm signal of neutral hydrogen on interferometric baselines of $50-250 λ$. We show that suppression of faint signals can effectively be avoided by calibrating these short baselines using only the longer baselines. However, this approach causes an excess variance on the short baselines due to small gain errors induced by overfitting during calibration. We apply a regularised expectation-maximisation algorithm with consensus optimisation (sagecal-co) to real data with simulated signals to show that overfitting can be largely mitigated by penalising spectrally non-smooth gain solutions during calibration. This reduces the excess power with about a factor 4 in the simulations. Our results agree with earlier theoretical analysis of this bias-variance trade off and support the gain-calibration approach to the LOFAR 21-cm signal data. △ Less

Submitted 3 November, 2021; originally announced November 2021.

Comments: This is a pre-copyedited, author-produced PDF of an article accepted for publication in MNRAS following peer review

Journal ref: MNRAS 2021

Circuit Complexity in $\mathcal{Z}_{2}$ ${\cal EEFT}$

Authors: Kiran Adhikari, Sayantan Choudhury, Sourabh Kumar, Saptarshi Mandal, Nilesh Pandey, Abhishek Roy, Soumya Sarkar, Partha Sarker, Saadat Salman Shariff

Abstract: Motivated by recent studies of circuit complexity in weakly interacting scalar field theory, we explore the computation of circuit complexity in $\mathcal{Z}_2$ Even Effective Field Theories ($\mathcal{Z}_2$ EEFTs). We consider a massive free field theory with higher-order Wilsonian operators such as $φ^{4}$, $φ^{6}$ and $φ^8.$ To facilitate our computation we regularize the theory by putting it o… ▽ More Motivated by recent studies of circuit complexity in weakly interacting scalar field theory, we explore the computation of circuit complexity in $\mathcal{Z}_2$ Even Effective Field Theories ($\mathcal{Z}_2$ EEFTs). We consider a massive free field theory with higher-order Wilsonian operators such as $φ^{4}$, $φ^{6}$ and $φ^8.$ To facilitate our computation we regularize the theory by putting it on a lattice. First, we consider a simple case of two oscillators and later generalize the results to $N$ oscillators. The study has been carried out for nearly Gaussian states. In our computation, the reference state is an approximately Gaussian unentangled state, and the corresponding target state, calculated from our theory, is an approximately Gaussian entangled state. We compute the complexity using the geometric approach developed by Nielsen, parameterizing the path ordered unitary transformation and minimizing the geodesic in the space of unitaries. The contribution of higher-order operators, to the circuit complexity, in our theory has been discussed. We also explore the dependency of complexity with other parameters in our theory for various cases. △ Less

Submitted 16 December, 2022; v1 submitted 20 September, 2021; originally announced September 2021.

Comments: 35 pages, 5 figures, 3 tables, reference list updated and version modified, Accepted for publication in Symmetry (section: Physics and Symmetry/Asymmetry, Special issue: Symmetry and Geometry in Physics II)

Journal ref: Symmetry 2023, 15(1), 31

Sub-arcsecond imaging with the International LOFAR Telescope: II. Completion of the LOFAR Long-Baseline Calibrator Survey

Authors: Neal Jackson, Shruti Badole, John Morgan, Rajan Chhetri, Kaspars Prusis, Atvars Nikolajevs, Leah Morabito, Michiel Brentjens, Frits Sweijen, Marco Iacobelli, Emanuela Orrù, J. Sluman, R. Blaauw, H. Mulder, P. van Dijk, Sean Mooney, Adam Deller, Javier Moldon, J. R. Callingham, Jeremy Harwood, Martin Hardcastle, George Heald, Alexander Drabent, J. P. McKean, A. Asgekar , et al. (47 additional authors not shown)

Abstract: The Low-Frequency Array (LOFAR) Long-Baseline Calibrator Survey (LBCS) was conducted between 2014 and 2019 in order to obtain a set of suitable calibrators for the LOFAR array. In this paper we present the complete survey, building on the preliminary analysis published in 2016 which covered approximately half the survey area. The final catalogue consists of 30006 observations of 24713 sources in t… ▽ More The Low-Frequency Array (LOFAR) Long-Baseline Calibrator Survey (LBCS) was conducted between 2014 and 2019 in order to obtain a set of suitable calibrators for the LOFAR array. In this paper we present the complete survey, building on the preliminary analysis published in 2016 which covered approximately half the survey area. The final catalogue consists of 30006 observations of 24713 sources in the northern sky, selected for a combination of high low-frequency radio flux density and flat spectral index using existing surveys (WENSS, NVSS, VLSS, and MSSS). Approximately one calibrator per square degree, suitable for calibration of $\geq$ 200 km baselines is identified by the detection of compact flux density, for declinations north of 30 degrees and away from the Galactic plane, with a considerably lower density south of this point due to relative difficulty in selecting flat-spectrum candidate sources in this area of the sky. Use of the VLBA calibrator list, together with statistical arguments by comparison with flux densities from lower-resolution catalogues, allow us to establish a rough flux density scale for the LBCS observations, so that LBCS statistics can be used to estimate compact flux densities on scales between 300 mas and 2 arcsec, for sources observed in the survey. The LBCS can be used to assess the structures of point sources in lower-resolution surveys, with significant reductions in the degree of coherence in these sources on scales between 2 arcsec and 300 mas. The LBCS survey sources show a greater incidence of compact flux density in quasars than in radio galaxies, consistent with unified schemes of radio sources. Comparison with samples of sources from interplanetary scintillation (IPS) studies with the Murchison Widefield Array (MWA) shows consistent patterns of detection of compact structure in sources observed both interferometrically with LOFAR and using IPS. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Comments: Accepted to a special issue of A&A on sub-arcsecond imaging with LOFAR

Journal ref: A&A 658, A2 (2022)

Sub-arcsecond imaging with the International LOFAR Telescope I. Foundational calibration strategy and pipeline

Authors: L. K. Morabito, N. J. Jackson, S. Mooney, F. Sweijen, S. Badole, P. Kukreti, D. Venkattu, C. Groeneveld, A. Kappes, E. Bonnassieux, A. Drabent, M. Iacobelli, J. H. Croston, P. N. Best, M. Bondi, J. R. Callingham, J. E. Conway, A. T. Deller, M. J. Hardcastle, J. P. McKean, G. K. Miley, J. Moldon, H. J. A. Röttgering, C. Tasse, T. W. Shimwell , et al. (49 additional authors not shown)

Abstract: [abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give… ▽ More [abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give an overview of the calibration strategy and discuss the special challenges inherent to enacting high-resolution imaging with LOFAR, and describe the pipeline, which is publicly available, in detail. We demonstrate the calibration strategy by using the pipeline on P205+55, a typical LOFAR Two-metre Sky Survey (LoTSS) pointing. We perform in-field delay calibration, solution referencing to other calibrators, self-calibration, and imaging of example directions of interest in the field. For this specific field and these ionospheric conditions, dispersive delay solutions can be transferred between calibrators up to ~1.5 degrees away, while phase solution transferral works well over 1 degree. We demonstrate a check of the astrometry and flux density scale. Imaging in 17 directions, the restoring beam is typically 0.3" x 0.2" although this varies slightly over the entire 5 square degree field of view. We achieve ~80 to 300 $μ$Jy/bm image rms noise, which is dependent on the distance from the phase centre; typical values are ~90 $μ$Jy/bm for the 8 hour observation with 48 MHz of bandwidth. Seventy percent of processed sources are detected, and from this we estimate that we should be able to image ~900 sources per LoTSS pointing. This equates to ~3 million sources in the northern sky, which LoTSS will entirely cover in the next several years. Future optimisation of the calibration strategy for efficient post-processing of LoTSS at high resolution (LoTSS-HR) makes this estimate a lower limit. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Comments: Accepted to a special issue of A&A on sub-arcsecond imaging with LOFAR. 24 pages, 16 figures

Journal ref: A&A 658, A1 (2022)

Extreme Face Inpainting with Sketch-Guided Conditional GAN

Authors: Nilesh Pandey, Andreas Savakis

Abstract: Recovering badly damaged face images is a useful yet challenging task, especially in extreme cases where the masked or damaged region is very large. One of the major challenges is the ability of the system to generalize on faces outside the training dataset. We propose to tackle this extreme inpainting task with a conditional Generative Adversarial Network (GAN) that utilizes structural informatio… ▽ More Recovering badly damaged face images is a useful yet challenging task, especially in extreme cases where the masked or damaged region is very large. One of the major challenges is the ability of the system to generalize on faces outside the training dataset. We propose to tackle this extreme inpainting task with a conditional Generative Adversarial Network (GAN) that utilizes structural information, such as edges, as a prior condition. Edge information can be obtained from the partially masked image and a structurally similar image or a hand drawing. In our proposed conditional GAN, we pass the conditional input in every layer of the encoder while maintaining consistency in the distributions between the learned weights and the incoming conditional input. We demonstrate the effectiveness of our method with badly damaged face examples. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Direct observation of topological charge impacting skyrmion bubble stability in Pt/Ni/Co asymmetric superlattices

Authors: Nisrit Pandey, Maxwell Li, Marc De Graef, Vincent Sokalski

Abstract: We characterize the magnetic properties and domain structure of Pt/Ni/Co asymmetric superlattices in comparison to the more established Pt/Co/Ni structure. This reversal in stacking sequence leads to a marked drop in interfacial magnetic anisotropy and the magnitude of the interfacial Dzyaloshinskii-Moriya interaction (DMI) as inferred from the DW structure, which we speculate could be related to… ▽ More We characterize the magnetic properties and domain structure of Pt/Ni/Co asymmetric superlattices in comparison to the more established Pt/Co/Ni structure. This reversal in stacking sequence leads to a marked drop in interfacial magnetic anisotropy and the magnitude of the interfacial Dzyaloshinskii-Moriya interaction (DMI) as inferred from the DW structure, which we speculate could be related to a degradation of the Pt/Co interface when Pt is deposited on top of the Co layer. Lorentz transmission electron microscopy reveals exclusively Néel type domain walls and, with a perpendicular field, Néel skyrmions in the Pt/Co/Ni films. Conversely, the Pt/Ni/Co samples show only achiral Bloch domain walls, which leads to the formation of achiral Bloch ($Q=1$) and type II bubbles ($Q=0$) at increased perpendicular field. Combined with the reduced anisotropy leading to greater bubble densities, the latter case makes for an excellent test bed to examine the benefits of topological charge on stability. Simultaneous observation of Bloch and type II bubbles shows a roughly 50 mT larger annihilation field for the former. An in-plane component to the magnetic field is shown to both impact the structure of the formed bubbles and separately suppress the topological benefit. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Heterogeneity in Neuronal Calcium Spike Trains based on Empirical Distance

Authors: Sathish Ande, Jayanth R Regatti, Neha Pandey, Ajith Karunarathne, Lopamudra Giri, Soumya Jana

Abstract: Statistical similarities between neuronal spike trains could reveal significant information on complex underlying processing. In general, the similarity between synchronous spike trains is somewhat easy to identify. However, the similar patterns also potentially appear in an asynchronous manner. However, existing methods for their identification tend to converge slowly, and cannot be applied to sh… ▽ More Statistical similarities between neuronal spike trains could reveal significant information on complex underlying processing. In general, the similarity between synchronous spike trains is somewhat easy to identify. However, the similar patterns also potentially appear in an asynchronous manner. However, existing methods for their identification tend to converge slowly, and cannot be applied to short sequences. In response, we propose Hellinger distance measure based on empirical probabilities, which we show to be as accurate as existing techniques, yet faster to converge for synthetic as well as experimental spike trains. Further, we cluster pairs of neuronal spike trains based on statistical similarities and found two non-overlap** classes, which could indicate functional similarities in neurons. Significantly, our technique detected functional heterogeneity in pairs of neuronal responses with the same performance as existing techniques, while exhibiting faster convergence. We expect the proposed method to facilitate large-scale studies of functional clustering, especially involving short sequences, which would in turn identify signatures of various diseases in terms of clustering patterns. △ Less

Submitted 13 March, 2021; originally announced March 2021.

Information Content in Neuronal Calcium Spike Trains: Entropy Rate Estimation based on Empirical Probabilities

Authors: Sathish Ande, Srinivas Avasarala, Jayanth R Regatti, Neha Pandey, Sarpras Swain, Ajith Karunarathne, Lopamudra Giri, Soumya Jana

Abstract: Quantification of information content and its temporal variation in intracellular calcium spike trains in neurons helps one understand functions such as memory, learning, and cognition. Such quantification could also reveal pathological signaling perturbation that potentially leads to devastating neurodegenerative conditions including Parkinson's, Alzheimer's, and Huntington's diseases. Accordingl… ▽ More Quantification of information content and its temporal variation in intracellular calcium spike trains in neurons helps one understand functions such as memory, learning, and cognition. Such quantification could also reveal pathological signaling perturbation that potentially leads to devastating neurodegenerative conditions including Parkinson's, Alzheimer's, and Huntington's diseases. Accordingly, estimation of entropy rate, an information-theoretic measure of information content, assumes primary significance. However, such estimation in the present context is challenging because, while entropy rate is traditionally defined asymptotically for long blocks under the assumption of stationarity, neurons are known to encode information in short intervals and the associated spike trains often exhibit nonstationarity. Against this backdrop, we propose an entropy rate estimator based on empirical probabilities that operates within windows, short enough to ensure approximate stationarity. Specifically, our estimator, parameterized by the length of encoding contexts, attempts to model the underlying memory structures in neuronal spike trains. In an example Markov process, we compared the performance of the proposed method with that of versions of the Lempel-Ziv algorithm as well as with that of a certain stationary distribution method and found the former to exhibit higher accuracy levels and faster convergence. Also, in experimentally recorded calcium responses of four hippocampal neurons, the proposed method showed faster convergence. Significantly, our technique detected structural heterogeneity in the underlying process memory in the responses of the aforementioned neurons. We believe that the proposed method facilitates large-scale studies of such heterogeneity, which could in turn identify signatures of various diseases in terms of entropy rate estimates. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Classification Of Automotive Targets Using Inverse Synthetic Aperture Radar Images

Authors: Neeraj Pandey, Shobha Sundar Ram

Abstract: We present a framework for simulating realistic inverse synthetic aperture radar images of automotive targets at millimeter wave frequencies. The model incorporates radar scattering phenomenology of commonly found vehicles along with range-Doppler based clutter and receiver noise. These images provide insights into the physical dimensions of the target, the number of wheels and the trajectory unde… ▽ More We present a framework for simulating realistic inverse synthetic aperture radar images of automotive targets at millimeter wave frequencies. The model incorporates radar scattering phenomenology of commonly found vehicles along with range-Doppler based clutter and receiver noise. These images provide insights into the physical dimensions of the target, the number of wheels and the trajectory undertaken by the target. The model is experimentally validated with measurement data gathered from an automotive radar. The images from the simulation database are subsequently classified using both traditional machine learning techniques as well as deep neural networks based on transfer learning. We show that the ISAR images offer a classification accuracy above 90% and are robust to both noise and clutter. △ Less

Submitted 17 March, 2021; v1 submitted 29 January, 2021; originally announced January 2021.

Variability Analysis in a 3-D Multi-Granular Hf$_x$Zr$_{1-x}$O$_2$ Ferroelectric Capacitor

Authors: Nilesh Pandey, Karishma Qureshi, Yogesh Singh Chauhan

Abstract: A simulation-based study of variability of remnant polarization $\left (P_r \right)$ in a multi-granular 3-D ultra-thin ferroelectric (FE) capacitor is presented in this paper. The Poisson Voronoi Tessellation Diagram (PVD) is used for the nucleation of grains in the FE region, which corresponds to the physical growth mechanism. The PVD algorithm implemented in MATLAB is coupled with TCAD simulati… ▽ More A simulation-based study of variability of remnant polarization $\left (P_r \right)$ in a multi-granular 3-D ultra-thin ferroelectric (FE) capacitor is presented in this paper. The Poisson Voronoi Tessellation Diagram (PVD) is used for the nucleation of grains in the FE region, which corresponds to the physical growth mechanism. The PVD algorithm implemented in MATLAB is coupled with TCAD simulations, to trace the ferroelectric hysteresis loop. It is found that the grains which have linear profile of $P_r$ show larger variability in the FE hysteresis loop, compared to the grains, which follow the Gaussian distribution of $P_r$. Additionally, the impact of dielectric content in the FE grains is analyzed. It is seen that the dielectric grains cause very large amount of variability in the FE hysteresis loop. An increase in the dielectric grains also leads to a loss in the retentivity of the hysteresis loop. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 4 pages, 7 figures

Analytical modeling and Dynamics of Multi-Domains in Negative-Capacitance MFIS-FETs

Authors: Nilesh Pandey, Yogesh Singh Chauhan

Abstract: Analytical modeling and dynamics of multidomain in metal-ferroelectric-insulator-semiconductor (MFIS)-FETs are presented in this paper. The formation of multi-domain (MD) leads to oscillations in the conduction band in the channel and periodicity in the local electric field in the ferroelectric region. The impact of 2-D local electric field on the MD switching is captured in the model using the do… ▽ More Analytical modeling and dynamics of multidomain in metal-ferroelectric-insulator-semiconductor (MFIS)-FETs are presented in this paper. The formation of multi-domain (MD) leads to oscillations in the conduction band in the channel and periodicity in the local electric field in the ferroelectric region. The impact of 2-D local electric field on the MD switching is captured in the model using the domain wall velocity concept. The optimum values of oxide thickness, ferroelectric thickness and channel length are calculated which corresponds to mono-domain device operation. Deviation from the optimum device parameters causes the transition of mono-domain state to multi-domain state in the ferroelectric. This work can be used as a guideline for designing MFIS-NCFETs, which provides the device parameters that leads to monodomain state in the MFIS-NCFET. △ Less

Submitted 8 November, 2020; originally announced November 2020.

The AARTFAAC Cosmic Explorer: observations of the 21-cm power spectrum in the EDGES absorption trough

Authors: B. K. Gehlot, F. G. Mertens, L. V. E. Koopmans, A. R. Offringa, A. Shulevski, M. Mevius, M. A. Brentjens, M. Kuiack, V. N. Pandey, A. Rowlinson, A. M. Sardarabadi, H. K. Vedantham, R. A. M. J. Wijers, S. Yatawatta, S. Zaroubi

Abstract: The 21-cm absorption feature reported by the EDGES collaboration is several times stronger than that predicted by traditional astrophysical models. If genuine, a deeper absorption may lead to stronger fluctuations on the 21-cm signal on degree scales (up to 1~Kelvin in rms), allowing these fluctuations to be detectable in nearly 50~times shorter integration times compared to previous predictions.… ▽ More The 21-cm absorption feature reported by the EDGES collaboration is several times stronger than that predicted by traditional astrophysical models. If genuine, a deeper absorption may lead to stronger fluctuations on the 21-cm signal on degree scales (up to 1~Kelvin in rms), allowing these fluctuations to be detectable in nearly 50~times shorter integration times compared to previous predictions. We commenced the "AARTFAAC Cosmic Explorer" (ACE) program, that employs the AARTFAAC wide-field imager, to measure or set limits on the power spectrum of the 21-cm fluctuations in the redshift range $z = 17.9-18.6$ ($Δν= 72.36-75.09$~MHz) corresponding to the deep part of the EDGES absorption feature. Here, we present first results from two LST bins: 23.5-23.75h and 23.5-23.75h, each with 2~h of data, recorded in `semi drift-scan' mode. We demonstrate the application of the new ACE data-processing pipeline (adapted from the LOFAR-EoR pipeline) on the AARTFAAC data. We observe that noise estimates from the channel and time-differenced Stokes~$V$ visibilities agree with each other. After 2~h of integration and subtraction of bright foregrounds, we obtain $2σ$ upper limits on the 21-cm power spectrum of $Δ_{21}^2 < (8139~\textrm{mK})^2$ and $Δ_{21}^2 < (8549~\textrm{mK})^2$ at $k = 0.144~h\,\textrm{cMpc}^{-1}$ for the two LST bins. Incoherently averaging the noise bias-corrected power spectra for the two LST bins yields an upper limit of $Δ_{21}^2 < (7388~\textrm{mK})^2$ at $k = 0.144~h\,\textrm{cMpc}^{-1}$. These are the deepest upper limits thus far at these redshifts. △ Less

Submitted 5 October, 2020; originally announced October 2020.

Comments: 16 pages, 10 figures, accepted for publication in MNRAS

Interpreting LOFAR 21-cm signal upper limits at z~9.1 in the context of high-z galaxy and reionisation observations

Authors: Bradley Greig, Andrei Mesinger, Léon V. E. Koopmans, Benedetta Ciardi, Garrelt Mellema, Saleem Zaroubi, Sambit K. Giri, Raghunath Ghara, Abhik Ghosh, Ilian T. Iliev, Florent G. Mertens, Rajesh Mondal, André R. Offringa, Vishambhar N. Pandey

Abstract: Using the latest upper limits on the 21-cm power spectrum at $z\approx9.1$ from the Low Frequency Array (LOFAR), we explore regions of parameter space which are inconsistent with the data. We use 21CMMC, a Monte Carlo Markov Chain sampler of 21cmFAST which directly forward models the 3D cosmic 21-cm signal in a fully Bayesian framework. We use the astrophysical parameterisation from 21cmFAST, whic… ▽ More Using the latest upper limits on the 21-cm power spectrum at $z\approx9.1$ from the Low Frequency Array (LOFAR), we explore regions of parameter space which are inconsistent with the data. We use 21CMMC, a Monte Carlo Markov Chain sampler of 21cmFAST which directly forward models the 3D cosmic 21-cm signal in a fully Bayesian framework. We use the astrophysical parameterisation from 21cmFAST, which includes mass-dependent star formation rates and ionising escape fractions as well as soft-band X-ray luminosities to place limits on the properties of the high-$z$ galaxies. Further, we connect the disfavoured regions of parameter space with existing observational constraints on the Epoch of Reionisation such as ultra-violet (UV) luminosity functions, background UV photoionisation rate, intergalactic medium (IGM) neutral fraction and the electron scattering optical depth. We find that all models exceeding the 21-cm signal limits set by LOFAR at $z\approx9.1$ are excluded at $\gtrsim2σ$ by other probes. Finally, we place limits on the IGM spin temperature from LOFAR, disfavouring at 95 per cent confidence spin temperatures below $\sim2.6$ K across an IGM neutral fraction range of $0.15 \lesssim \bar{x}_{H{\scriptscriptstyle I}} \lesssim 0.6$. Note, these limits are only obtained from 141 hrs of data in a single redshift bin. With tighter upper limits, across multiple redshift bins expected in the near future from LOFAR, more viable models will be ruled out. Our approach demonstrates the potential of forward modelling tools such as 21CMMC in combining 21-cm observations with other high-$z$ probes to constrain the astrophysics of galaxies. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Comments: 12 pages, 4 pages, 1 table. Submitted to MNRAS, comments welcome

Study of Reactively Sputtered Nickel Nitride Thin Films

Authors: Nidhi Pandey, Mukul Gupta, Jochen Stahn

Abstract: Nickel nitride (Ni-N) thin film samples were deposited using reactive magnetron sputtering process utilizing different partial flow of N2 (RN2). They were characterized using x-ray reflectivity (XRR), x-ray diffraction (XRD) and x-ray absorption near edge spectroscopy (XANES) taken at N K-edge and Ni L-edges. From XRR measurements, we find that the deposition rate and the density of Ni-N films dec… ▽ More Nickel nitride (Ni-N) thin film samples were deposited using reactive magnetron sputtering process utilizing different partial flow of N2 (RN2). They were characterized using x-ray reflectivity (XRR), x-ray diffraction (XRD) and x-ray absorption near edge spectroscopy (XANES) taken at N K-edge and Ni L-edges. From XRR measurements, we find that the deposition rate and the density of Ni-N films decrease due to successively progression in RN2, signifying that Ni-N alloys and compounds are forming both at Ni target surface and also within the thin film samples. The crystal structure obtained from XRD measurements suggest an evolution of different Ni-N compounds given by: Ni, Ni(N), Ni4N, Ni3N, and Ni2N with a gradual rise in RN2. XANES measurements further confirm these phases, in agreement with XRD results. Polarized neutron reflectivity measurements were performed to probe the magnetization, and it was found Ni-N thin films become non-magnetic even when N incorporation increases beyond few at%. Overall growth behavior of Ni-N samples has been compared with that of rather well-known Fe-N and Co-N systems, yielding similarities and differences among them. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Comments: 7 Pages, 5 figures

Tight Constraints on the Excess Radio Background at $z = 9.1$ from LOFAR

Authors: R. Mondal, A. Fialkov, C. Fling, I. T. Iliev, R. Barkana, B. Ciardi, G. Mellema, S. Zaroubi, L. V. E Koopmans, F. G. Mertens, B. K. Gehlot, R. Ghara, A. Ghosh, S. K. Giri, A. Offringa, V. N. Pandey

Abstract: The ARCADE2 and LWA1 experiments have claimed an excess over the Cosmic Microwave Background (CMB) at low radio frequencies. If the cosmological high-redshift contribution to this radio background is between 0.1% and 22% of the CMB at 1.42 GHz, it could explain the tentative EDGES Low-Band detection of the anomalously deep absorption in the 21-cm signal of neutral hydrogen. We use the upper limit… ▽ More The ARCADE2 and LWA1 experiments have claimed an excess over the Cosmic Microwave Background (CMB) at low radio frequencies. If the cosmological high-redshift contribution to this radio background is between 0.1% and 22% of the CMB at 1.42 GHz, it could explain the tentative EDGES Low-Band detection of the anomalously deep absorption in the 21-cm signal of neutral hydrogen. We use the upper limit on the 21-cm signal from the Epoch of Reionization ($z=9.1$) based on 141 hours of observations with LOFAR to evaluate the contribution of the high redshift Universe to the detected radio background. Marginalizing over astrophysical properties of star-forming halos, we find (at 95% C.L.) that the cosmological radio background can be at most 9.6% of the CMB at 1.42 GHz. This limit rules out strong contribution of the high-redshift Universe to the ARCADE2 and LWA1 measurements. Even though LOFAR places limit on the extra radio background, excess of $0.1-9.6$% over the CMB (at 1.42 GHz) is still allowed and could explain the EDGES Low-Band detection. We also constrain the thermal and ionization state of the gas at $z = 9.1$ and put limits on the properties of the first star-forming objects. We find that, in agreement with the limits from EDGES High-Band data, LOFAR data constrain scenarios with inefficient X-ray sources and cases where the Universe was ionized by stars in massive halos only. △ Less

Submitted 13 August, 2020; v1 submitted 1 April, 2020; originally announced April 2020.

Comments: Published in Monthly Notices of the Royal Astronomical Society (MNRAS). Available at https://doi.org/10.1093/mnras/staa2422

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 498, Issue 3, November 2020, Pages 4178-4191

A LOFAR Observation of Ionospheric Scintillation from Two Simultaneous Travelling Ionospheric Disturbances

Authors: Richard A. Fallows, Biagio Forte, Ivan Astin, Tom Allbrook, Alex Arnold, Alan Wood, Gareth Dorrian, Maaijke Mevius, Hanna Rothkaehl, Barbara Matyjasiak, Andrzej Krankowski, James M. Anderson, Ashish Asgekar, I. Max Avruch, Mark Bentum, Mario M. Bisi, Harvey R. Butcher, Benedetta Ciardi, Bartosz Dabrowski, Sieds Damstra, Francesco de Gasperin, Sven Duscha, Jochen Eislöffel, Thomas M. O. Franzen, Michael A. Garrett , et al. (33 additional authors not shown)

Abstract: This paper presents the results from one of the first observations of ionospheric scintillation taken using the Low-Frequency Array (LOFAR). The observation was of the strong natural radio source Cas A, taken overnight on 18-19 August 2013, and exhibited moderately strong scattering effects in dynamic spectra of intensity received across an observing bandwidth of 10-80MHz. Delay-Doppler spectra (t… ▽ More This paper presents the results from one of the first observations of ionospheric scintillation taken using the Low-Frequency Array (LOFAR). The observation was of the strong natural radio source Cas A, taken overnight on 18-19 August 2013, and exhibited moderately strong scattering effects in dynamic spectra of intensity received across an observing bandwidth of 10-80MHz. Delay-Doppler spectra (the 2-D FFT of the dynamic spectrum) from the first hour of observation showed two discrete parabolic arcs, one with a steep curvature and the other shallow, which can be used to provide estimates of the distance to, and velocity of, the scattering plasma. A cross-correlation analysis of data received by the dense array of stations in the LOFAR "core" reveals two different velocities in the scintillation pattern: a primary velocity of ~30m/s with a north-west to south-east direction, associated with the steep parabolic arc and a scattering altitude in the F-region or higher, and a secondary velocity of ~110m/s with a north-east to south-west direction, associated with the shallow arc and a scattering altitude in the D-region. Geomagnetic activity was low in the mid-latitudes at the time, but a weak sub-storm at high latitudes reached its peak at the start of the observation. An analysis of Global Navigation Satellite Systems (GNSS) and ionosonde data from the time reveals a larger-scale travelling ionospheric disturbance (TID), possibly the result of the high-latitude activity, travelling in the north-west to south-east direction, and, simultaneously, a smaller--scale TID travelling in a north-east to south-west direction, which could be associated with atmospheric gravity wave activity. The LOFAR observation shows scattering from both TIDs, at different altitudes and propagating in different directions. To the best of our knowledge this is the first time that such a phenomenon has been reported. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Comments: 24 pages, 16 figures. Accepted for open-access publication in the Journal of Space Weather and Space Climate. For associated movie file, see https://www.swsc-journal.org/10.1051/swsc/2020010/olm

Improved upper limits on the 21-cm signal power spectrum of neutral hydrogen at $\boldsymbol{z \approx 9.1}$ from LOFAR

Authors: F. G. Mertens, M. Mevius, L. V. E Koopmans, A. R. Offringa, G. Mellema, S. Zaroubi, M. A. Brentjens, H. Gan, B. K. Gehlot, V. N. Pandey, A. M. Sardarabadi, H. K. Vedantham, S. Yatawatta, K. M. B. Asad, B. Ciardi, E. Chapman, S. Gazagnes, R. Ghara, A. Ghosh, S. K. Giri, I. T. Iliev, V. Jelić, R. Kooistra, R. Mondal, J. Schaye , et al. (1 additional authors not shown)

Abstract: A new upper limit on the 21-cm signal power spectrum at a redshift of $z \approx 9.1$ is presented, based on 141 hours of data obtained with the Low-Frequency Array (LOFAR). The analysis includes significant improvements in spectrally-smooth gain-calibration, Gaussian Process Regression (GPR) foreground mitigation and optimally-weighted power spectrum inference. Previously seen `excess power' due… ▽ More A new upper limit on the 21-cm signal power spectrum at a redshift of $z \approx 9.1$ is presented, based on 141 hours of data obtained with the Low-Frequency Array (LOFAR). The analysis includes significant improvements in spectrally-smooth gain-calibration, Gaussian Process Regression (GPR) foreground mitigation and optimally-weighted power spectrum inference. Previously seen `excess power' due to spectral structure in the gain solutions has markedly reduced but some excess power still remains with a spectral correlation distinct from thermal noise. This excess has a spectral coherence scale of $0.25 - 0.45$\,MHz and is partially correlated between nights, especially in the foreground wedge region. The correlation is stronger between nights covering similar local sidereal times. A best 2-$σ$ upper limit of $Δ^2_{21} < (73)^2\,\mathrm{mK^2}$ at $k = 0.075\,\mathrm{h\,cMpc^{-1}}$ is found, an improvement by a factor $\approx 8$ in power compared to the previously reported upper limit. The remaining excess power could be due to residual foreground emission from sources or diffuse emission far away from the phase centre, polarization leakage, chromatic calibration errors, ionosphere, or low-level radio-frequency interference. We discuss future improvements to the signal processing chain that can further reduce or even eliminate these causes of excess power. △ Less

Submitted 19 February, 2020; v1 submitted 17 February, 2020; originally announced February 2020.

Comments: 27 pages, 14 figues, accepted in MNRAS (updated with reference to accompanying paper)

Constraining the intergalactic medium at $z\approx$ 9.1 using LOFAR Epoch of Reionization observations

Authors: R. Ghara, S. K. Giri, G. Mellema, B. Ciardi, S. Zaroubi, I. T. Iliev, L. V. E. Koopmans, E. Chapman, S. Gazagnes, B. K. Gehlot, A. Ghosh, V. Jelic, F. G. Mertens, R. Mondal, J. Schaye, M. B. Silva, K. M. B. Asad, R. Kooistra, M. Mevius, A. R. Offringa, V. N. Pandey, S. Yatawatta

Abstract: We derive constraints on the thermal and ionization states of the intergalactic medium (IGM) at redshift $\approx$ 9.1 using new upper limits on the 21-cm power spectrum measured by the LOFAR radio-telescope and a prior on the ionized fraction at that redshift estimated from recent cosmic microwave background (CMB) observations. We have used results from the reionization simulation code GRIZZLY an… ▽ More We derive constraints on the thermal and ionization states of the intergalactic medium (IGM) at redshift $\approx$ 9.1 using new upper limits on the 21-cm power spectrum measured by the LOFAR radio-telescope and a prior on the ionized fraction at that redshift estimated from recent cosmic microwave background (CMB) observations. We have used results from the reionization simulation code GRIZZLY and a Bayesian inference framework to constrain the parameters which describe the physical state of the IGM. We find that, if the gas heating remains negligible, an IGM with ionized fraction $\gtrsim 0.13$ and a distribution of the ionized regions with a characteristic size $\gtrsim 8 ~h^{-1}$ comoving megaparsec (Mpc) and a full width at the half maximum (FWHM) $\gtrsim 16 ~h^{-1}$ Mpc is ruled out. For an IGM with a uniform spin temperature $T_{\rm S} \gtrsim 3$ K, no constraints on the ionized component can be computed. If the large-scale fluctuations of the signal are driven by spin temperature fluctuations, an IGM with a volume fraction $\lesssim 0.34$ of heated regions with a temperature larger than CMB, average gas temperature 7-160 K and a distribution of the heated regions with characteristic size 3.5-70 $h^{-1}$ Mpc and FWHM of $\lesssim 110$ $h^{-1}$ Mpc is ruled out. These constraints are within the 95 per cent credible intervals. With more stringent future upper limits from LOFAR at multiple redshifts, the constraints will become tighter and will exclude an increasingly large region of the parameter space. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Comments: 22 pages, 15 Figures, 5 tables, Accepted for publication in MNRAS

Stabilization of coupled Dzyaloshinskii domain walls in fully compensated synthetic anti-ferromagnets

Authors: Nisrit Pandey, Maxwell Li, Marc De Graef, Vincent Sokalski

Abstract: We examine the combined effects of interlayer exchange coupling (IEC) and the interfacial Dzyaloshinskii-Moriya Interaction (DMI) on the structure of magnetic domain walls in fully compensated synthetic anti-ferromagnets (SAFs). Ir-based SAFs with ferromagnetic (FM) layers based on [Pt/(Co/Ni)M]N were characterized by Lorentz transmission electron microscopy (LTEM). The multi-layer design of the i… ▽ More We examine the combined effects of interlayer exchange coupling (IEC) and the interfacial Dzyaloshinskii-Moriya Interaction (DMI) on the structure of magnetic domain walls in fully compensated synthetic anti-ferromagnets (SAFs). Ir-based SAFs with ferromagnetic (FM) layers based on [Pt/(Co/Ni)M]N were characterized by Lorentz transmission electron microscopy (LTEM). The multi-layer design of the individual ferromagnetic layers enables control of the interfacial Dzyaloshinskii-Moriya interaction (via 'M') and, in turn, the structure and chirality of domain walls (DWs). We compare the Fresnel-mode LTEM images in SAF designs with only a change in the purported strength of the DMI. The existence of anti-ferromagnetically coupled Dzyaloshinskii domain walls (DWs) in a high DMI SAF is confirmed through application of in-situ perpendicular magnetic field and sample tilt. This conclusion is based on a unique set of conditions required to observe contrast in Fresnel-mode LTEM, which we outline in this document. △ Less

Submitted 24 October, 2019; originally announced October 2019.

Comments: 4 Pages, 5 figures

Poly-GAN: Multi-Conditioned GAN for Fashion Synthesis

Authors: Nilesh Pandey, Andreas Savakis

Abstract: We present Poly-GAN, a novel conditional GAN architecture that is motivated by Fashion Synthesis, an application where garments are automatically placed on images of human models at an arbitrary pose. Poly-GAN allows conditioning on multiple inputs and is suitable for many tasks, including image alignment, image stitching, and inpainting. Existing methods have a similar pipeline where three differ… ▽ More We present Poly-GAN, a novel conditional GAN architecture that is motivated by Fashion Synthesis, an application where garments are automatically placed on images of human models at an arbitrary pose. Poly-GAN allows conditioning on multiple inputs and is suitable for many tasks, including image alignment, image stitching, and inpainting. Existing methods have a similar pipeline where three different networks are used to first align garments with the human pose, then perform stitching of the aligned garment and finally refine the results. Poly-GAN is the first instance where a common architecture is used to perform all three tasks. Our novel architecture enforces the conditions at all layers of the encoder and utilizes skip connections from the coarse layers of the encoder to the respective layers of the decoder. Poly-GAN is able to perform a spatial transformation of the garment based on the RGB skeleton of the model at an arbitrary pose. Additionally, Poly-GAN can perform image stitching, regardless of the garment orientation, and inpainting on the garment mask when it contains irregular holes. Our system achieves state-of-the-art quantitative results on Structural Similarity Index metric and Inception Score metric using the DeepFashion dataset. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Adversarial Learning with Multiscale Features and Kernel Factorization for Retinal Blood Vessel Segmentation

Authors: Farhan Akram, Vivek Kumar Singh, Hatem A. Rashwan, Mohamed Abdel-Nasser, Md. Mostafa Kamal Sarker, Nidhi Pandey, Domenec Puig

Abstract: In this paper, we propose an efficient blood vessel segmentation method for the eye fundus images using adversarial learning with multiscale features and kernel factorization. In the generator network of the adversarial framework, spatial pyramid pooling, kernel factorization and squeeze excitation block are employed to enhance the feature representation in spatial domain on different scales with… ▽ More In this paper, we propose an efficient blood vessel segmentation method for the eye fundus images using adversarial learning with multiscale features and kernel factorization. In the generator network of the adversarial framework, spatial pyramid pooling, kernel factorization and squeeze excitation block are employed to enhance the feature representation in spatial domain on different scales with reduced computational complexity. In turn, the discriminator network of the adversarial framework is formulated by combining convolutional layers with an additional squeeze excitation block to differentiate the generated segmentation mask from its respective ground truth. Before feeding the images to the network, we pre-processed them by using edge sharpening and Gaussian regularization to reach an optimized solution for vessel segmentation. The output of the trained model is post-processed using morphological operations to remove the small speckles of noise. The proposed method qualitatively and quantitatively outperforms state-of-the-art vessel segmentation methods using DRIVE and STARE datasets. △ Less

Submitted 5 July, 2019; originally announced July 2019.

Comments: 9 pages, 4 figures

An Efficient Solution for Breast Tumor Segmentation and Classification in Ultrasound Images Using Deep Adversarial Learning

Authors: Vivek Kumar Singh, Hatem A. Rashwan, Mohamed Abdel-Nasser, Md. Mostafa Kamal Sarker, Farhan Akram, Nidhi Pandey, Santiago Romani, Domenec Puig

Abstract: This paper proposes an efficient solution for tumor segmentation and classification in breast ultrasound (BUS) images. We propose to add an atrous convolution layer to the conditional generative adversarial network (cGAN) segmentation model to learn tumor features at different resolutions of BUS images. To automatically re-balance the relative impact of each of the highest level encoded features,… ▽ More This paper proposes an efficient solution for tumor segmentation and classification in breast ultrasound (BUS) images. We propose to add an atrous convolution layer to the conditional generative adversarial network (cGAN) segmentation model to learn tumor features at different resolutions of BUS images. To automatically re-balance the relative impact of each of the highest level encoded features, we also propose to add a channel-wise weighting block in the network. In addition, the SSIM and L1-norm loss with the typical adversarial loss are used as a loss function to train the model. Our model outperforms the state-of-the-art segmentation models in terms of the Dice and IoU metrics, achieving top scores of 93.76% and 88.82%, respectively. In the classification stage, we show that few statistics features extracted from the shape of the boundaries of the predicted masks can properly discriminate between benign and malignant tumors with an accuracy of 85%$ △ Less

Submitted 1 July, 2019; originally announced July 2019.

Comments: 9 pages

Influence of interface and microstructure on magnetization of epitaxial Fe4N thin film

Authors: Nidhi Pandey, S. Putter, S. M. Amir, V. R. Reddy, D. M. Phase, J. Stahn, Ajay Gupta, Mukul Gupta

Abstract: Epitaxial Fe4N thin films grown on lattice-matched LaAlO3 (LAO) substrate using sputtering and molecular beam epitaxy techniques have been studied in this work. Within the sputtering process, films were grown with conventional direct current magnetron sputtering (dcMS) and for the first time, using a high power impulse magnetron sputtering (HiPIMS) process. Surface morphology and depth profile rev… ▽ More Epitaxial Fe4N thin films grown on lattice-matched LaAlO3 (LAO) substrate using sputtering and molecular beam epitaxy techniques have been studied in this work. Within the sputtering process, films were grown with conventional direct current magnetron sputtering (dcMS) and for the first time, using a high power impulse magnetron sputtering (HiPIMS) process. Surface morphology and depth profile reveal that HiPIMS deposited film has the lowest roughness, the highest packing density and the sharpest interface. La from the LAO substrate and Fe from the film interdiffuse and forms an undesired interface spreading to an extent of about 10-20 nm. In the HiPIMS process, layer by layer type growth leads to a globular microstructure which restricts the extent of the interdiffused interface. Such substrate-film interactions and microstructure play a vital role in affecting the electronic hybridization and magnetic properties of Fe4N films. The magnetic moment (Ms) was compared using bulk, element-specific and magnetic depth profiling techniques. We found that Ms was the highest when the thickness of the interdiffused layer was lowest and only be achieved in the HiPIMS grown samples. Presence of small moment at the N site was also evidenced by element-specific x-ray circular dichroism measurement in HiPIMS grown sample. A large variation in the Ms values of Fe4N found in the experimental works carried out so far could be due to such interdiffused layer which is generally not expected to form in otherwise stable oxide substrate. In addition, a consequence of substrate-film interdiffusion and microstructure results in different kinds of different kind of magnetic anisotropies in films grown using different techniques. △ Less

Submitted 4 June, 2019; originally announced June 2019.

Comments: 8 pages, 8 figures, Supplementary Material

Journal ref: Phys. Rev. Materials 3, 114414 (2019)