-
Experimental and computational approaches to study the high temperature thermoelectric properties of novel topological semimetal CoSi
Authors:
Shamim Sk,
Nisha Shahi,
Sudhir K. Pandey
Abstract:
Here, we study the thermoelectric properties of topological semimetal CoSi in the temperature range $300-800$ K by using combined experimental and density functional theory (DFT) based methods. CoSi is synthesized using arc melting technique and the Rietveld refinement gives the lattice parameters of a = b = c = 4.445 Å. The measured values of Seebeck coefficient (S) shows the non-monotonic behavi…
▽ More
Here, we study the thermoelectric properties of topological semimetal CoSi in the temperature range $300-800$ K by using combined experimental and density functional theory (DFT) based methods. CoSi is synthesized using arc melting technique and the Rietveld refinement gives the lattice parameters of a = b = c = 4.445 Å. The measured values of Seebeck coefficient (S) shows the non-monotonic behaviour in the studied temperature range with the value of $\sim-$81 $μ$V/K at room temperature. The $|S|$ first increases till 560 K ($\sim-$93 $μ$V/K) and then decreases up to 800 K ($\sim-$84 $μ$V/K) indicating the dominating n-type behaviour in the full temperature range. The electrical conductivity, $σ$ (thermal conductivity, $κ$) shows the monotonic decreasing (increasing) behaviour with the values of $\sim$5.2$\times 10^{5}$ (12.1 W/m-K) and $\sim$3.6$\times 10^{5}$ (14.2 W/m-K) $Ω^{-1}m^{-1}$ at 300 K and 800 K, respectively. The $κ$ exhibits the temperature dependency as, $κ\propto T^{0.16}$. The DFT based Boltzmann transport theory is used to understand these behaviour. The multi-band electron and hole pockets appear to be mainly responsible for deciding the temperature dependent transport behaviour. Specifically, the decrease in the $|S|$ above 560 K and change in the slope of $σ$ around 450 K are due to the contribution of thermally generated charge carriers from the hole pockets. The temperature dependent relaxation time is computed which shows temperature dependency of $1/T^{0.35}$. Present study suggests that electronic band-structure obtained from DFT provides reasonably good estimate of the transport coefficients of CoSi in the high temperature region of $300-800$ K.
△ Less
Submitted 24 November, 2021; v1 submitted 3 November, 2021;
originally announced November 2021.
-
Longitudinal double-spin asymmetry for inclusive jet and dijet production in polarized proton collisions at $\sqrt{s}=510$ GeV
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
A. Aitbaev,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (372 additional authors not shown)
Abstract:
We report measurements of the longitudinal double-spin asymmetry, $A_{LL}$, for inclusive jet and dijet production in polarized proton-proton collisions at midrapidity and center-of-mass energy $\sqrt{s}$ = 510 GeV, using the high luminosity data sample collected by the STAR experiment in 2013. These measurements complement and improve the precision of previous STAR measurements at the same center…
▽ More
We report measurements of the longitudinal double-spin asymmetry, $A_{LL}$, for inclusive jet and dijet production in polarized proton-proton collisions at midrapidity and center-of-mass energy $\sqrt{s}$ = 510 GeV, using the high luminosity data sample collected by the STAR experiment in 2013. These measurements complement and improve the precision of previous STAR measurements at the same center-of-mass energy that probe the polarized gluon distribution function at partonic momentum fraction 0.015 $\lesssim x \lesssim$ 0.25. The dijet asymmetries are separated into four jet-pair topologies, which provide further constraints on the $x$ dependence of the polarized gluon distribution function. These measurements are in agreement with previous STAR measurements and with predictions from current next-to-leading order global analyses. They provide more precise data at low dijet invariant mass that will better constraint the shape of the polarized gluon distribution function of the proton.
△ Less
Submitted 23 May, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Measurement of cold nuclear matter effects for inclusive $J/ψ$ in $p$+Au collisions at $\sqrt{s_{_{\mathrm{NN}}}}$ = 200 GeV
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (373 additional authors not shown)
Abstract:
Measurement by the STAR experiment at RHIC of the cold nuclear matter (CNM) effects experienced by inclusive $J/ψ$ at mid-rapidity in 0-100\% $p$+Au collisions at $\sqrt{s_{_{\mathrm{NN}}}}$ = 200 GeV is presented. Such effects are quantified utilizing the nuclear modification factor, $R_{p\mathrm{Au}}$, obtained by taking a ratio of $J/ψ$ yield in $p$+Au collisions to that in $p$+$p$ collisions s…
▽ More
Measurement by the STAR experiment at RHIC of the cold nuclear matter (CNM) effects experienced by inclusive $J/ψ$ at mid-rapidity in 0-100\% $p$+Au collisions at $\sqrt{s_{_{\mathrm{NN}}}}$ = 200 GeV is presented. Such effects are quantified utilizing the nuclear modification factor, $R_{p\mathrm{Au}}$, obtained by taking a ratio of $J/ψ$ yield in $p$+Au collisions to that in $p$+$p$ collisions scaled by the number of binary nucleon-nucleon collisions. The differential $J/ψ$ yield in both $p$+$p$ and $p$+Au collisions is measured through the dimuon decay channel, taking advantage of the trigger capability provided by the Muon Telescope Detector in the RHIC 2015 run. Consequently, the $J/ψ$ $R_{p\mathrm{Au}}$ is derived within the transverse momentum ($p_{\mathrm{T}}$) range of 0 to 10 GeV/$c$. A suppression of approximately 30% is observed for $p_{\mathrm{T}}<2$ GeV/$c$, while $J/ψ$ $R_{p\mathrm{Au}}$ becomes compatible with unity for $p_{\mathrm{T}}$ greater than 3 GeV/$c$, indicating the $J/ψ$ yield is minimally affected by the CNM effects at high $p_{\mathrm{T}}$. Comparison to a similar measurement from 0-20% central Au+Au collisions reveals that the observed strong $J/ψ$ suppression above 3 Gev/$c$ is mostly due to the hot medium effects, providing strong evidence for the formation of the quark-gluon plasma in these collisions. Several model calculations show qualitative agreement with the measured $J/ψ$ $R_{p\mathrm{Au}}$, while their agreement with the $J/ψ$ yields in $p$+$p$ and $p$+Au collisions is worse.
△ Less
Submitted 14 January, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
Measurements of ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ Lifetimes and Yields in Au+Au Collisions in the High Baryon Density Region
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (378 additional authors not shown)
Abstract:
We report precision measurements of hypernuclei ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ lifetimes obtained from Au+Au collisions at \snn = 3.0\,GeV and 7.2\,GeV collected by the STAR experiment at RHIC, and the first measurement of ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ mid-rapidity yields in Au+Au collisions at \snn = 3.0\,GeV. ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$, being the two simplest bound states composed…
▽ More
We report precision measurements of hypernuclei ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ lifetimes obtained from Au+Au collisions at \snn = 3.0\,GeV and 7.2\,GeV collected by the STAR experiment at RHIC, and the first measurement of ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ mid-rapidity yields in Au+Au collisions at \snn = 3.0\,GeV. ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$, being the two simplest bound states composed of hyperons and nucleons, are cornerstones in the field of hypernuclear physics. Their lifetimes are measured to be $221\pm15(\rm stat.)\pm19(\rm syst.)$\,ps for ${}^3_Λ\rm{H}$ and $218\pm6(\rm stat.)\pm13(\rm syst.)$\,ps for ${}^4_Λ\rm{H}$. The $p_T$-integrated yields of ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ are presented in different centrality and rapidity intervals. It is observed that the shape of the rapidity distribution of ${}^4_Λ\rm{H}$ is different for 0--10\% and 10--50\% centrality collisions. Thermal model calculations, using the canonical ensemble for strangeness, describes the ${}^3_Λ\rm{H}$ yield well, while underestimating the ${}^4_Λ\rm{H}$ yield. Transport models, combining baryonic mean-field and coalescence (JAM) or utilizing dynamical cluster formation via baryonic interactions (PHQMD) for light nuclei and hypernuclei production, approximately describe the measured ${}^3_Λ\rm{H}$ and ${}^4_Λ\rm{H}$ yields. Our measurements provide means to precisely assess our understanding of the fundamental baryonic interactions with strange quarks, which can impact our understanding of more complicated systems involving hyperons, such as the interior of neutron stars or exotic hypernuclei.
△ Less
Submitted 18 May, 2022; v1 submitted 18 October, 2021;
originally announced October 2021.
-
TRACK: A python code for calculating the transport properties of correlated electron systems using Kubo formalism
Authors:
Antik Sihi,
Sudhir K. Pandey
Abstract:
Exploring the transport properties of different materials brings new avenue for basic understanding of emergent phenomena and practical applications in many different fields. Here, we report a program named as TRACK (TRAnsport properties for Correlated materials using Kubo formalism) which is written in Python 3 for calculating temperature dependent electrical conductivity, electronic part of ther…
▽ More
Exploring the transport properties of different materials brings new avenue for basic understanding of emergent phenomena and practical applications in many different fields. Here, we report a program named as TRACK (TRAnsport properties for Correlated materials using Kubo formalism) which is written in Python 3 for calculating temperature dependent electrical conductivity, electronic part of thermal conductivity, Seebeck coefficient and Lorenz number. In this code, Kubo linear-response formalism is utilized for computing these parameters using both interacting and non-interacting electronic structure methods. The formula for transport coefficients is accordingly modified to obtain the transport parameters under relaxation time approximation using band-theory. The basic inputs of this program are the structural information, dense k-points sampling in the irreducible part of the Brillouin zone and the information of velocity matrix elements, which can be calculated using third-party ab-initio package. TRACK is expected to calculate the transport properties of different class of materials. The code has been benchmarked by performing calculation on three different types of materials namely Vanadium (V), FeSi and LaCoO$_3$, which are metal, semiconductor and Mott insulator, respectively. The temperature dependent behaviour of the transport coefficients for these materials show fairly good agreement with the corresponding experimental data.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
Towards Robotic Knee Arthroscopy: Multi-Scale Network for Tissue-Tool Segmentation
Authors:
Shahnewaz Ali,
Prof. Ross Crawford,
Dr. Frederic Maire,
Assoc. Prof. Ajay K. Pandey
Abstract:
Tissue awareness has a great demand to improve surgical accuracy in minimally invasive procedures. In arthroscopy, it is one of the challenging tasks due to surgical sites exhibit limited features and textures. Moreover, arthroscopic surgical video shows high intra-class variations. Arthroscopic videos are recorded with endoscope known as arthroscope which records tissue structures at proximity, t…
▽ More
Tissue awareness has a great demand to improve surgical accuracy in minimally invasive procedures. In arthroscopy, it is one of the challenging tasks due to surgical sites exhibit limited features and textures. Moreover, arthroscopic surgical video shows high intra-class variations. Arthroscopic videos are recorded with endoscope known as arthroscope which records tissue structures at proximity, therefore, frames contain minimal joint structure. As consequences, fully conventional network-based segmentation model suffers from long- and short- term dependency problems. In this study, we present a densely connected shape aware multi-scale segmentation model which captures multi-scale features and integrates shape features to achieve tissue-tool segmentations. The model has been evaluated with three distinct datasets. Moreover, with the publicly available polyp dataset our proposed model achieved 5.09 % accuracy improvement.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
SAU: Smooth activation function using convolution with approximate identities
Authors:
Koushik Biswas,
Sandeep Kumar,
Shilpak Banerjee,
Ashish Kumar Pandey
Abstract:
Well-known activation functions like ReLU or Leaky ReLU are non-differentiable at the origin. Over the years, many smooth approximations of ReLU have been proposed using various smoothing techniques. We propose new smooth approximations of a non-differentiable activation function by convolving it with approximate identities. In particular, we present smooth approximations of Leaky ReLU and show th…
▽ More
Well-known activation functions like ReLU or Leaky ReLU are non-differentiable at the origin. Over the years, many smooth approximations of ReLU have been proposed using various smoothing techniques. We propose new smooth approximations of a non-differentiable activation function by convolving it with approximate identities. In particular, we present smooth approximations of Leaky ReLU and show that they outperform several well-known activation functions in various datasets and models. We call this function Smooth Activation Unit (SAU). Replacing ReLU by SAU, we get 5.12% improvement with ShuffleNet V2 (2.0x) model on CIFAR100 dataset.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Measurement of inclusive electrons from open heavy-flavor hadron decays in $p$+$p$ collisions at $\sqrt{s} = 200$ GeV with the STAR detector
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Agg arwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (372 additional authors not shown)
Abstract:
We report a new measurement of the production cross section for inclusive electrons from open heavy-flavor hadron decays as a function of transverse momentum ($p_{\rm T}$) at mid-rapidity ($|y|<$ 0.7) in $p$+$p$ collisions at $\sqrt{s} = 200$ GeV. The result is presented for 2.5 $<p_{\rm T}<$ 10 GeV/$c$ with an improved precision above 6 GeV/$c$ with respect to the previous measurements, providing…
▽ More
We report a new measurement of the production cross section for inclusive electrons from open heavy-flavor hadron decays as a function of transverse momentum ($p_{\rm T}$) at mid-rapidity ($|y|<$ 0.7) in $p$+$p$ collisions at $\sqrt{s} = 200$ GeV. The result is presented for 2.5 $<p_{\rm T}<$ 10 GeV/$c$ with an improved precision above 6 GeV/$c$ with respect to the previous measurements, providing more constraints on perturbative QCD calculations. Moreover, this measurement also provides a high-precision reference for measurements of nuclear modification factors for inclusive electrons from open-charm and -bottom hadron decays in heavy-ion collisions.
△ Less
Submitted 3 March, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Differential measurements of jet substructure and partonic energy loss in Au$+$Au collisions at $\sqrt{s_{\rm{NN}}} =200$ GeV
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (372 additional authors not shown)
Abstract:
The STAR collaboration presents jet substructure measurements related to both the momentum fraction and the opening angle within jets in \pp and \AuAu collisions at \sqrtsn $= 200$ GeV. The substructure observables include SoftDrop groomed momentum fraction (\zg), groomed jet radius (\rg), and subjet momentum fraction (\zsj) and opening angle (\tsj). The latter observable is introduced for the fir…
▽ More
The STAR collaboration presents jet substructure measurements related to both the momentum fraction and the opening angle within jets in \pp and \AuAu collisions at \sqrtsn $= 200$ GeV. The substructure observables include SoftDrop groomed momentum fraction (\zg), groomed jet radius (\rg), and subjet momentum fraction (\zsj) and opening angle (\tsj). The latter observable is introduced for the first time. Fully corrected subjet measurements are presented for \pp collisions and are compared to leading order Monte Carlo models. The subjet \tsj~distributions reflect the jets leading opening angle and are utilized as a proxy for the resolution scale of the medium in \AuAu collisions. We compare data from \AuAu collisions to those from \pp which are embedded in minimum-bias \AuAu events in order to include the effects of detector smearing and the heavy-ion collision underlying event. The subjet observables are shown to be more robust to the background than \zg~and \rg.
We observe no significant modifications of the subjet observables within the two highest-energy, back-to-back jets, resulting in a distribution of opening angles and the splittings that are vacuum-like. We also report measurements of the differential di-jet momentum imbalance ($A_{\rm{J}}$) for jets of varying \tsj. We find no qualitative differences in energy loss signatures for varying angular scales in the range $0.1 < $ \tsj $ < 0.3$, leading to the possible interpretation that energy loss in this population of high momentum di-jet pairs, is due to soft medium-induced gluon radiation from a single color-charge as it traverses the medium.
△ Less
Submitted 3 May, 2022; v1 submitted 20 September, 2021;
originally announced September 2021.
-
On the density of visible lattice points along polynomials
Authors:
Sneha Chaubey,
Ashish Kumar Pandey
Abstract:
Recently, the notion of visibility from the origin has been generalized by viewing lattice points through curved lines of sights, where the family of curves considered are $y=mx^k$, $k\in\mathbb{N}$. In this note, we generalize the notion of visible lattice points for a given polynomial family of curves passing through the origin, and study the density of visible lattice points for this family. Th…
▽ More
Recently, the notion of visibility from the origin has been generalized by viewing lattice points through curved lines of sights, where the family of curves considered are $y=mx^k$, $k\in\mathbb{N}$. In this note, we generalize the notion of visible lattice points for a given polynomial family of curves passing through the origin, and study the density of visible lattice points for this family. The density of visible lattice points for family of curves $y=mx^k$, $k\in\mathbb{N}$ is well understood as one has nice arithmetic interpretations in terms of a generalized gcd function, which seems to be absent for general polynomial families. We pose "Visibility density conjecture" regarding the density of visible lattice points for polynomial families passing through the origin, and show some numerical results supporting the conjecture. We obtain a lower bound on the density for a class of quadratic families. In addition, we discuss some ideas of the proof of the conjecture for the simplest quadratic family.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Probing the gluonic structure of the deuteron with $J/ψ$ photoproduction in d+Au ultra-peripheral collisions
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (378 additional authors not shown)
Abstract:
Understanding gluon density distributions and how they are modified in nuclei are among the most important goals in nuclear physics. In recent years, diffractive vector meson production measured in ultra-peripheral collisions (UPCs) at heavy-ion colliders has provided a new tool for probing the gluon density. In this Letter, we report the first measurement of $J/ψ$ photoproduction off the deuteron…
▽ More
Understanding gluon density distributions and how they are modified in nuclei are among the most important goals in nuclear physics. In recent years, diffractive vector meson production measured in ultra-peripheral collisions (UPCs) at heavy-ion colliders has provided a new tool for probing the gluon density. In this Letter, we report the first measurement of $J/ψ$ photoproduction off the deuteron in UPCs at the center-of-mass energy $\sqrt{s_{_{\rm NN}}}=200~\rm GeV$ in d$+$Au collisions. The differential cross section as a function of momentum transfer $-t$ is measured. In addition, data with a neutron tagged in the deuteron-going Zero-Degree Calorimeter is investigated for the first time, which is found to be consistent with the expectation of incoherent diffractive scattering at low momentum transfer. Theoretical predictions based on the Color Glass Condensate saturation model and the gluon shadowing model are compared with the data quantitatively. A better agreement with the saturation model has been observed. With the current measurement, the results are found to be directly sensitive to the gluon density distribution of the deuteron and the deuteron breakup, which provides insights into the nuclear gluonic structure.
△ Less
Submitted 25 March, 2022; v1 submitted 15 September, 2021;
originally announced September 2021.
-
ErfAct and Pserf: Non-monotonic Smooth Trainable Activation Functions
Authors:
Koushik Biswas,
Sandeep Kumar,
Shilpak Banerjee,
Ashish Kumar Pandey
Abstract:
An activation function is a crucial component of a neural network that introduces non-linearity in the network. The state-of-the-art performance of a neural network depends also on the perfect choice of an activation function. We propose two novel non-monotonic smooth trainable activation functions, called ErfAct and Pserf. Experiments suggest that the proposed functions improve the network perfor…
▽ More
An activation function is a crucial component of a neural network that introduces non-linearity in the network. The state-of-the-art performance of a neural network depends also on the perfect choice of an activation function. We propose two novel non-monotonic smooth trainable activation functions, called ErfAct and Pserf. Experiments suggest that the proposed functions improve the network performance significantly compared to the widely used activations like ReLU, Swish, and Mish. Replacing ReLU by ErfAct and Pserf, we have 5.68% and 5.42% improvement for top-1 accuracy on Shufflenet V2 (2.0x) network in CIFAR100 dataset, 2.11% and 1.96% improvement for top-1 accuracy on Shufflenet V2 (2.0x) network in CIFAR10 dataset, 1.0%, and 1.0% improvement on mean average precision (mAP) on SSD300 model in Pascal VOC dataset.
△ Less
Submitted 24 March, 2022; v1 submitted 9 September, 2021;
originally announced September 2021.
-
Surgery Scene Restoration for Robot Assisted Minimally Invasive Surgery
Authors:
Shahnewaz Ali,
Yaqub Jonmohamadi,
Ross Crawford,
Davide Fontanarosa,
Ajay K. Pandey
Abstract:
Minimally invasive surgery (MIS) offers several advantages including minimum tissue injury and blood loss, and quick recovery time, however, it imposes some limitations on surgeons ability. Among others such as lack of tactile or haptic feedback, poor visualization of the surgical site is one of the most acknowledged factors that exhibits several surgical drawbacks including unintentional tissue d…
▽ More
Minimally invasive surgery (MIS) offers several advantages including minimum tissue injury and blood loss, and quick recovery time, however, it imposes some limitations on surgeons ability. Among others such as lack of tactile or haptic feedback, poor visualization of the surgical site is one of the most acknowledged factors that exhibits several surgical drawbacks including unintentional tissue damage. To the context of robot assisted surgery, lack of frame contextual details makes vision task challenging when it comes to tracking tissue and tools, segmenting scene, and estimating pose and depth. In MIS the acquired frames are compromised by different noises and get blurred caused by motions from different sources. Moreover, when underwater environment is considered for instance knee arthroscopy, mostly visible noises and blur effects are originated from the environment, poor control on illuminations and imaging conditions. Additionally, in MIS, procedure like automatic white balancing and transformation between the raw color information to its standard RGB color space are often absent due to the hardware miniaturization. There is a high demand of an online preprocessing framework that can circumvent these drawbacks. Our proposed method is able to restore a latent clean and sharp image in standard RGB color space from its noisy, blur and raw observation in a single preprocessing stage.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Generating Seed magnetic field à la Chiral Biermann battery
Authors:
Arun Kumar Pandey,
Sampurn Anand
Abstract:
Cosmological and astrophysical observations indicate the presence of magnetic field over all scales. In order to explain these magnetic fields, it is assumed that there exists a seed magnetic field that gets amplified by dynamos. These seed fields may have been produced during inflation, at phase transitions, or some turbulent phase of the early universe. One well-known mechanism to get the seed f…
▽ More
Cosmological and astrophysical observations indicate the presence of magnetic field over all scales. In order to explain these magnetic fields, it is assumed that there exists a seed magnetic field that gets amplified by dynamos. These seed fields may have been produced during inflation, at phase transitions, or some turbulent phase of the early universe. One well-known mechanism to get the seed field is the Biermann battery, which was originally discussed in the context of generation in an astrophysical object. Requirements for this mechanism to work are (i) non-zero gradient of the electron number density and pressure, (ii) they are non-parallel to each other. In the present article, we propose a similar mechanism to generate the seed field but in inhomogeneous chiral plasma. Our mechanism works, in presence of chiral anomaly, by the virtue of inhomogeneity in the chiral chemical potential and temperature. We will discuss various scenarios where inhomogeneities in the chemical potential and temperature can arise. We found that, depending on the epoch of generation, the strength of the seed magnetic fields varies from a few nano-Gauss (nG) to a few hundred nG.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Transverse spectral instability in generalized Kadomtsev-Petviashvili equation
Authors:
Bhavna,
Atul Kumar,
Ashish Kumar Pandey
Abstract:
We study transverse stability and instability of one-dimensional small-amplitude periodic traveling waves of a generalized Kadomtsev-Petviashvili equation with respect to two-dimensional perturbations, which are either periodic or square-integrable in the direction of the propagation of the underlying one-dimensional wave and periodic in the transverse direction. We obtain transverse instability r…
▽ More
We study transverse stability and instability of one-dimensional small-amplitude periodic traveling waves of a generalized Kadomtsev-Petviashvili equation with respect to two-dimensional perturbations, which are either periodic or square-integrable in the direction of the propagation of the underlying one-dimensional wave and periodic in the transverse direction. We obtain transverse instability results in KP-fKdV, KP-ILW, and KP-Whitham equations. Moreover, assuming the spectral stability of one-dimensional wave with respect to one-dimensional square-integrable periodic perturbations, we obtain transverse stability results in aforementioned equations.
△ Less
Submitted 31 March, 2022; v1 submitted 1 September, 2021;
originally announced September 2021.
-
Search for the Chiral Magnetic Effect with Isobar Collisions at $\sqrt{s_{NN}}$ = 200 GeV by the STAR Collaboration at RHIC
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (373 additional authors not shown)
Abstract:
The chiral magnetic effect (CME) is predicted to occur as a consequence of a local violation of $\cal P$ and $\cal CP$ symmetries of the strong interaction amidst a strong electro-magnetic field generated in relativistic heavy-ion collisions. Experimental manifestation of the CME involves a separation of positively and negatively charged hadrons along the direction of the magnetic field. Previous…
▽ More
The chiral magnetic effect (CME) is predicted to occur as a consequence of a local violation of $\cal P$ and $\cal CP$ symmetries of the strong interaction amidst a strong electro-magnetic field generated in relativistic heavy-ion collisions. Experimental manifestation of the CME involves a separation of positively and negatively charged hadrons along the direction of the magnetic field. Previous measurements of the CME-sensitive charge-separation observables remain inconclusive because of large background contributions. In order to better control the influence of signal and backgrounds, the STAR Collaboration performed a blind analysis of a large data sample of approximately 3.8 billion isobar collisions of $^{96}_{44}$Ru+$^{96}_{44}$Ru and $^{96}_{40}$Zr+$^{96}_{40}$Zr at $\sqrt{s_{\rm NN}}=200$ GeV. Prior to the blind analysis, the CME signatures are predefined as a significant excess of the CME-sensitive observables in Ru+Ru collisions over those in Zr+Zr collisions, owing to a larger magnetic field in the former. A precision down to 0.4% is achieved, as anticipated, in the relative magnitudes of the pertinent observables between the two isobar systems. Observed differences in the multiplicity and flow harmonics at the matching centrality indicate that the magnitude of the CME background is different between the two species. No CME signature that satisfies the predefined criteria has been observed in isobar collisions in this blind analysis.
△ Less
Submitted 31 August, 2021;
originally announced September 2021.
-
A silver(II) route to unconventional superconductivity
Authors:
Xiaoqiang Liu,
Shishir K. Pandey,
Ji Feng
Abstract:
The highly unusual divalent silver in silver difluoride (AgF$_2$) features a nearly square lattice of Ag$^{+2}$ bridged by fluorides. As a structural and electronic analogue of cuprates, its superconducting properties are yet to be examined. Our first principles electronic structure calculations reveal a striking resemblance between AgF$_2$ and the cuprates. Computed spin susceptibility shows a ma…
▽ More
The highly unusual divalent silver in silver difluoride (AgF$_2$) features a nearly square lattice of Ag$^{+2}$ bridged by fluorides. As a structural and electronic analogue of cuprates, its superconducting properties are yet to be examined. Our first principles electronic structure calculations reveal a striking resemblance between AgF$_2$ and the cuprates. Computed spin susceptibility shows a magnetic instability consistent with the experimentally observed antiferromagnetic transition. A linearized Eliashberg theory in fluctuation-exchange approximation shows an unconventional singlet $d$-wave superconducting pairing for bulk AgF$_2$ at an optimal electron do**. The pairing is found to strengthen with a decreasing interlayer coupling, highlighting the importance of quasi-2D nature of the crystal structure. These findings place AgF$_2$ in the category of unconventional high-$T_\text{C}$ superconductors, and its chemical uniqueness may help shed new lights on the high-$T_\text{C}$ phenomena.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
Magnetic Topological Semimetal Phase with Electronic Correlation Enhancement in SmSbTe
Authors:
Krishna Pandey,
Debashis Mondal,
John William Villanova,
Joseph Roll,
Rabindra Basnet,
Aaron Wegner,
Gokul Acharya,
Md Rafique Un Nabi,
Barun Ghosh,
Jun Fujii,
Jian Wang,
Bo Da,
Amit Agarwal,
Ivana Vobornik,
Antonio Politano,
Salvador Barraza-Lopez,
** Hu
Abstract:
The ZrSiS family of compounds hosts various exotic quantum phenomena due to the presence of both topological nonsymmorphic Dirac fermions and nodal-line fermions. In this material family, the LnSbTe (Ln= lanthanide) compounds are particularly interesting owing to the intrinsic magnetism from magnetic Ln which leads to new properties and quantum states. In this work, the authors focus on the previo…
▽ More
The ZrSiS family of compounds hosts various exotic quantum phenomena due to the presence of both topological nonsymmorphic Dirac fermions and nodal-line fermions. In this material family, the LnSbTe (Ln= lanthanide) compounds are particularly interesting owing to the intrinsic magnetism from magnetic Ln which leads to new properties and quantum states. In this work, the authors focus on the previously unexplored compound SmSbTe. The studies reveal a rare combination of a few functional properties in this material, including antiferromagnetism with possible magnetic frustration, electron correlation enhancement, and Dirac nodal-line fermions. These properties enable SmSbTe as a unique platform to explore exotic quantum phenomena and advanced functionalities arising from the interplay between magnetism, topology, and electronic correlations.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Understanding the Seebeck coefficient of LaNiO3 compound in the temperature range 300-620 K
Authors:
Arzena Khatun,
Shamim Sk,
Sudhir K. Pandey
Abstract:
Transition metal oxides have been attracted much attention in thermoelectric community from the last few decades. In the present work, we have synthesized LaNiO$_{3}$ by a simple solution combustion process. To analyze the crystal structure and structural parameters we have used Rietveld refinement method wherein FullProf software is employed. The room temperature x-ray diffraction indicates the t…
▽ More
Transition metal oxides have been attracted much attention in thermoelectric community from the last few decades. In the present work, we have synthesized LaNiO$_{3}$ by a simple solution combustion process. To analyze the crystal structure and structural parameters we have used Rietveld refinement method wherein FullProf software is employed. The room temperature x-ray diffraction indicates the trigonal structure with space group $R \, \overline{3} \, c$ (No. 167). The refined values of lattice parameters are a = b = 5.4615 Å\, $\&$ c = 13.1777 Å. Temperature dependent Seebeck coefficient (S) of this compound has been investigated by using experimental and computational tools. The measurement of S is conducted in the temperature range $300-620$ K. The measured values of S in the entire temperature range have negative sign that indicates \textit{n}-type character of the compound. The value of S is found to be $\sim$ $-$8 $μ$V/K at 300 K and at 620 K this value is $\sim$ $-$12 $μ$V/K. The electronic structure calculation is carried out using DFT+\textit{U} method due to having strong correlation in LaNiO$_{3}$. The calculation predicts the metallic ground state of the compound. Temperature dependent S is calculated using BoltzTraP package and compared with experiment. The best matching between experimental and calculated values of S is observed when self-interaction correction is employed as double counting correction in spin-polarized DFT + \textit{U} (= 1 eV) calculation. Based on the computational results maximum power factors are also calculated for \textit{p}-type and \textit{n}-type do** of this compound.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
On the minimum size of subset and subsequence sums in integers
Authors:
Jagannath Bhanja,
Ram Krishna Pandey
Abstract:
Let $\mathcal{A}$ be a sequence of $rk$ terms which is made up of $k$ distinct integers each appearing exactly $r$ times in $\mathcal{A}$. The sum of all terms of a subsequence of $\mathcal{A}$ is called a subsequence sum of $\mathcal{A}$. For a nonnegative integer $α\leq rk$, let $Σ_α (\mathcal{A})$ be the set of all subsequence sums of $\mathcal{A}$ that correspond to the subsequences of length…
▽ More
Let $\mathcal{A}$ be a sequence of $rk$ terms which is made up of $k$ distinct integers each appearing exactly $r$ times in $\mathcal{A}$. The sum of all terms of a subsequence of $\mathcal{A}$ is called a subsequence sum of $\mathcal{A}$. For a nonnegative integer $α\leq rk$, let $Σ_α (\mathcal{A})$ be the set of all subsequence sums of $\mathcal{A}$ that correspond to the subsequences of length $α$ or more. When $r=1$, we call the subsequence sums as subset sums and we write $Σ_α (A)$ for $Σ_α (\mathcal{A})$. In this article, using some simple combinatorial arguments, we establish optimal lower bounds for the size of $Σ_α (A)$ and $Σ_α (\mathcal{A})$. As special cases, we also obtain some already known results in this study.
△ Less
Submitted 23 November, 2022; v1 submitted 16 August, 2021;
originally announced August 2021.
-
An ab-initio study of topological and transport properties of YAuPb
Authors:
Vivek Pandey,
Antik Sihi,
Sudhir K. Pandey
Abstract:
In the last few decades, the study of topological materials has been carried out on an extensive scale. Half-Heusler alloys are well known for their topological behaviours. In this work, we present a detailed study of topological properties of a ternary Half-Heusler alloy, YAuPb, using the tight-binding approach. We have calculated some important topological properties which includes$-$ finding no…
▽ More
In the last few decades, the study of topological materials has been carried out on an extensive scale. Half-Heusler alloys are well known for their topological behaviours. In this work, we present a detailed study of topological properties of a ternary Half-Heusler alloy, YAuPb, using the tight-binding approach. We have calculated some important topological properties which includes$-$ finding nodes and their chiralities, Berry curvature ($\boldsymbolΩ$) and the surface-states. Based on the study of these properties, we categorise the material as non-trivial topological semimetal. Besides the topological behaviours, we present a comparative study of temperature dependent transport properties corresponding to the chemical potential ($μ$) of the Fermi level and the node points. The results obtained from the calculations of electrical conductivity per unit relaxation time ($\boldsymbolσ/τ$) and the electronic part of thermal conductivity per unit relaxation time ($\boldsymbolκ_0$) indicates the conducting nature of the material to both the heat and electricity. Furthermore, the negative value of $S$ obtained, indicates the n-type behaviour of the compound. The calculated value of electronic specific heat (Pauli magnetic susceptibility) corresponding to Fermi level is $\sim 0.03 \hspace{1mm}(0.18) \times 10^{-2}$ $ Jmol^{-1}K^{-1}$ ($\sim 1.21 \hspace{1mm}(1.14) \times 10^{-10}$ $ m^{3}mol^{-1}$) at 50 (300) K. This work suggests that YAuPb is a promising candidate of non-trivial topological semimetals which can be employed in transmission of heat and electricity, and as n-type material within the temperature range of 50-300 K.
△ Less
Submitted 15 August, 2021;
originally announced August 2021.
-
First-priniciple based study of transport properties of non-trivial topological fermions of CoSi
Authors:
Paromita Dutta,
Sudhir K. Pandey
Abstract:
Recently, CoSi has been identified to have unconventional electronic topology due to lack of inversion center in its B20 cubic structure. The electronic topology has been reported to be present at three nodal points found in the band structure. Two of these nodal points are situated at the $Γ$ (G1 \& G2) and one at $R$ (R1) point. Based on this, we present a study where various transport coefficie…
▽ More
Recently, CoSi has been identified to have unconventional electronic topology due to lack of inversion center in its B20 cubic structure. The electronic topology has been reported to be present at three nodal points found in the band structure. Two of these nodal points are situated at the $Γ$ (G1 \& G2) and one at $R$ (R1) point. Based on this, we present a study where various transport coefficients are investigated by using \textit{first-principle} based DFT method for the temperature (T) range 40-300 K. For the chemical potential ($μ$) corresponding to energies of these nodal points and at the Fermi level (E$_F$), 3D constant energy surfaces are constructed. They have shown that the number of states available at energies of these nodal points and the E$_F$ follows an increasing trend as R1 $>$ G2 $>$ E$_F$ $>$ G1 at T = 0 K. Similar increasing behavior seems to follow by other transport coefficients at different $μ$ with T rise such as electrical conductivity($σ$)/relaxation time($τ$) ratio and electronic thermal conductivity ($κ_e/τ$ = $κ^0$). For example, at T = 100 K, $σ/ τ$ $\sim$ 0.13$\times$10$^{20}$ $Ω^{-1} m^{-1} s^{-1}$ at G1 whereas its value reaches $ \sim$ 0.18$\times$10$^{20}$ $Ω^{-1} m^{-1} s^{-1}$ at R1 nodal point. However, Seebeck coefficient ($S$) seems to follow the trend as G2 $>$ E$_F$ $>$ R1 $>$ G1 at any given T. The values of $S$ are obtained to be positive at the $μ$ corresponding to the G2, R1 and E$_F$ (except G1) which is increasing with the rise in T. Also, the dominant charge carriers at G1 point are found to be electrons for T $<$ 225 K whereas for T $>$ 225 K, the charge carriers are obtained to be dominated by holes. Furthermore, the do** concentrations have also been calculated for G1, G2 and R1 points.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Probing Strangeness Canonical Ensemble with $K^{-}$, $φ(1020)$ and $Ξ^{-}$ Production in Au+Au Collisions at ${\sqrt{s_{\rm NN}} = \rm{3\,GeV}}$
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (374 additional authors not shown)
Abstract:
We report the first multi-differential measurements of strange hadrons of $K^{-}$, $φ$ and $Ξ^{-}$ yields as well as the ratios of $φ/K^-$ and $φ/Ξ^-$ in Au+Au collisions at ${\sqrt{s_{\rm NN}} = \rm{3\,GeV}}$ with the STAR experiment fixed target configuration at RHIC. The $φ$ mesons and $Ξ^{-}$ hyperons are measured through hadronic decay channels, $φ\rightarrow K^+K^-$ and…
▽ More
We report the first multi-differential measurements of strange hadrons of $K^{-}$, $φ$ and $Ξ^{-}$ yields as well as the ratios of $φ/K^-$ and $φ/Ξ^-$ in Au+Au collisions at ${\sqrt{s_{\rm NN}} = \rm{3\,GeV}}$ with the STAR experiment fixed target configuration at RHIC. The $φ$ mesons and $Ξ^{-}$ hyperons are measured through hadronic decay channels, $φ\rightarrow K^+K^-$ and $Ξ^-\rightarrow Λπ^-$. Collision centrality and rapidity dependence of the transverse momentum spectra for these strange hadrons are presented. The $4π$ yields and ratios are compared to thermal model and hadronic transport model predictions. At this collision energy, thermal model with grand canonical ensemble (GCE) under-predicts the $φ/K^-$ and $φ/Ξ^-$ ratios while the result of canonical ensemble (CE) calculations reproduce $φ/K^-$, with the correlation length $r_c \sim 2.7$\,fm, and $φ/Ξ^-$, $r_c \sim 4.2$\,fm, for the 0-10\% central collisions. Hadronic transport models including high mass resonance decays could also describe the ratios. While thermal calculations with GCE work well for strangeness production in high energy collisions, the change to CE at $\rm{3\,GeV}$ implies a rather different medium property at high baryon density.
△ Less
Submitted 1 June, 2022; v1 submitted 2 August, 2021;
originally announced August 2021.
-
Disappearance of partonic collectivity in $\sqrt{s_{NN}}$ = 3 GeV Au+Au collisions at RHIC
Authors:
STAR Collaboration,
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied
, et al. (373 additional authors not shown)
Abstract:
We report on the measurements of directed flow $v_1$ and elliptic flow $v_2$ for hadrons ($π^{\pm}$, $K^{\pm}$, $K_{S}^0$, $p$, $φ$, $Λ$ and $Ξ^{-}$) from Au+Au collisions at $\sqrt{s_{NN}}$ = 3\,GeV and $v_{2}$ for ($π^{\pm}$, $K^{\pm}$, $p$ and $\overline{p}$) at 27 and 54.4\,GeV with the STAR experiment. While at the two higher energy midcentral collisions the number-of-constituent-quark (NCQ)…
▽ More
We report on the measurements of directed flow $v_1$ and elliptic flow $v_2$ for hadrons ($π^{\pm}$, $K^{\pm}$, $K_{S}^0$, $p$, $φ$, $Λ$ and $Ξ^{-}$) from Au+Au collisions at $\sqrt{s_{NN}}$ = 3\,GeV and $v_{2}$ for ($π^{\pm}$, $K^{\pm}$, $p$ and $\overline{p}$) at 27 and 54.4\,GeV with the STAR experiment. While at the two higher energy midcentral collisions the number-of-constituent-quark (NCQ) scaling holds, at 3\,GeV the $v_{2}$ at midrapidity is negative for all hadrons and the NCQ scaling is absent. In addition, the $v_1$ slopes at midrapidity for almost all observed hadrons are found to be positive, implying dominant repulsive baryonic interactions. The features of negative $v_2$ and positive $v_1$ slope at 3\,GeV can be reproduced with a baryonic mean-field in transport model calculations. These results imply that the medium in such collisions is likely characterized by baryonic interactions.
△ Less
Submitted 10 March, 2022; v1 submitted 2 August, 2021;
originally announced August 2021.
-
Global $Λ$-hyperon polarization in Au+Au collisions at $\sqrt{s_\mathrm{NN}}=3$ GeV
Authors:
M. S. Abdallah,
B. E. Aboona,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (372 additional authors not shown)
Abstract:
Global hyperon polarization, $\overline{P}_\mathrm{H}$, in Au+Au collisions over a large range of collision energy, $\sqrt{s_\mathrm{NN}}$, was recently measured and successfully reproduced by hydrodynamic and transport models with intense fluid vorticity of the quark-gluon plasma. While naïve extrapolation of data trends suggests a large $\overline{P}_\mathrm{H}$ as the collision energy is reduce…
▽ More
Global hyperon polarization, $\overline{P}_\mathrm{H}$, in Au+Au collisions over a large range of collision energy, $\sqrt{s_\mathrm{NN}}$, was recently measured and successfully reproduced by hydrodynamic and transport models with intense fluid vorticity of the quark-gluon plasma. While naïve extrapolation of data trends suggests a large $\overline{P}_\mathrm{H}$ as the collision energy is reduced, the behavior of $\overline{P}_\mathrm{H}$ at small $\sqrt{s_\mathrm{NN}}<7.7$ GeV is unknown. Operating the STAR experiment in fixed-target mode, we measured the polarization of $Λ$ hyperons along the direction of global angular momentum in Au+Au collisions at $\sqrt{s_\mathrm{NN}}=3$ GeV. The observation of substantial polarization of $4.91\pm0.81(\rm stat.)\pm0.15(\rm syst.)$% in these collisions may require a reexamination of the viscosity of any fluid created in the collision, of the thermalization timescale of rotational modes, and of hadronic mechanisms to produce global polarization.
△ Less
Submitted 4 February, 2022; v1 submitted 30 July, 2021;
originally announced August 2021.
-
Tropical cyclone intensity estimations over the Indian ocean using Machine Learning
Authors:
Koushik Biswas,
Sandeep Kumar,
Ashish Kumar Pandey
Abstract:
Tropical cyclones are one of the most powerful and destructive natural phenomena on earth. Tropical storms and heavy rains can cause floods, which lead to human lives and economic loss. Devastating winds accompanying cyclones heavily affect not only the coastal regions, even distant areas. Our study focuses on the intensity estimation, particularly cyclone grade and maximum sustained surface wind…
▽ More
Tropical cyclones are one of the most powerful and destructive natural phenomena on earth. Tropical storms and heavy rains can cause floods, which lead to human lives and economic loss. Devastating winds accompanying cyclones heavily affect not only the coastal regions, even distant areas. Our study focuses on the intensity estimation, particularly cyclone grade and maximum sustained surface wind speed (MSWS) of a tropical cyclone over the North Indian Ocean. We use various machine learning algorithms to estimate cyclone grade and MSWS. We have used the basin of origin, date, time, latitude, longitude, estimated central pressure, and pressure drop as attributes of our models. We use multi-class classification models for the categorical outcome variable, cyclone grade, and regression models for MSWS as it is a continuous variable. Using the best track data of 28 years over the North Indian Ocean, we estimate grade with an accuracy of 88% and MSWS with a root mean square error (RMSE) of 2.3. For higher grade categories (5-7), accuracy improves to an average of 98.84%. We tested our model with two recent tropical cyclones in the North Indian Ocean, Vayu and Fani. For grade, we obtained an accuracy of 93.22% and 95.23% respectively, while for MSWS, we obtained RMSE of 2.2 and 3.4 and $R^2$ of 0.99 and 0.99, respectively.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
Intensity Prediction of Tropical Cyclones using Long Short-Term Memory Network
Authors:
Koushik Biswas,
Sandeep Kumar,
Ashish Kumar Pandey
Abstract:
Tropical cyclones can be of varied intensity and cause a huge loss of lives and property if the intensity is high enough. Therefore, the prediction of the intensity of tropical cyclones advance in time is of utmost importance. We propose a novel stacked bidirectional long short-term memory network (BiLSTM) based model architecture to predict the intensity of a tropical cyclone in terms of Maximum…
▽ More
Tropical cyclones can be of varied intensity and cause a huge loss of lives and property if the intensity is high enough. Therefore, the prediction of the intensity of tropical cyclones advance in time is of utmost importance. We propose a novel stacked bidirectional long short-term memory network (BiLSTM) based model architecture to predict the intensity of a tropical cyclone in terms of Maximum surface sustained wind speed (MSWS). The proposed model can predict MSWS well advance in time (up to 72 h) with very high accuracy. We have applied the model on tropical cyclones in the North Indian Ocean from 1982 to 2018 and checked its performance on two recent tropical cyclones, namely, Fani and Vayu. The model predicts MSWS (in knots) for the next 3, 12, 24, 36, 48, 60, and 72 hours with a mean absolute error of 1.52, 3.66, 5.88, 7.42, 8.96, 10.15, and 11.92, respectively.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
High-frequency instabilities of the Ostrovsky equation
Authors:
Bhavna,
Atul Kumar,
Ashish Kumar Pandey
Abstract:
We study spectral stability of small amplitude periodic traveling waves of the Ostrovsky equation. We prove that these waves exhibit spectral instabilities arising from a collision of pair of non-zero eigenvalues on the imaginary axis when subjected to square integrable perturbations on the whole real line. We also list all such collisions between pair of eigenvalues on the imaginary axis and do a…
▽ More
We study spectral stability of small amplitude periodic traveling waves of the Ostrovsky equation. We prove that these waves exhibit spectral instabilities arising from a collision of pair of non-zero eigenvalues on the imaginary axis when subjected to square integrable perturbations on the whole real line. We also list all such collisions between pair of eigenvalues on the imaginary axis and do a Krein signature analysis.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Spin-dependent dark matter-electron interactions
Authors:
C. -P. Liu,
Chih-Pan Wu,
Jiunn-Wei Chen,
Hsin-Chang Chi,
Mukesh K. Pandey,
Lakhwinder Singh,
Henry T. Wong
Abstract:
Detectors with low thresholds for electron recoil open a new window to direct searches of sub-GeV dark matter (DM) candidates. In the past decade, many strong limits on DM-electron interactions have been set, but most on the one which is spin-independent (SI) of both dark matter and electron spins. In this work, we study DM-atom scattering through a spin-dependent (SD) interaction at leading order…
▽ More
Detectors with low thresholds for electron recoil open a new window to direct searches of sub-GeV dark matter (DM) candidates. In the past decade, many strong limits on DM-electron interactions have been set, but most on the one which is spin-independent (SI) of both dark matter and electron spins. In this work, we study DM-atom scattering through a spin-dependent (SD) interaction at leading order (LO), using well-benchmarked, state-of-the-art atomic many-body calculations. Exclusion limits on the SD DM-electron cross section are derived with data taken from experiments with xenon and germanium detectors at leading sensitivities. In the DM mass range of 0.1 - 10 GeV, the best limits set by the XENON1T experiment: $σ_e^{\textrm{(SD)}}<10^{-41}-10^{-40}\,\textrm{cm}^2$ are comparable to the ones drawn on DM-neutron and DM-proton at slightly bigger DM masses. The detector's responses to the LO SD and SI interactions are analyzed. In nonrelativistic limit, a constant ratio between them leads to an indistinguishability of the SD and SI recoil energy spectra. Relativistic calculations however show the scaling starts to break down at a few hundreds of eV, where spin-orbit effects become sizable. We discuss the prospects of disentangling the SI and SD components in DM-electron interactions via spectral shape measurements, as well as having spin-sensitive experimental signatures without SI background.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Instrument for simultaneous measurement of Seebeck coefficient and thermal conductivity in the temperature range 300-800 K with python interfacing
Authors:
Shamim Sk,
Abhishek Pandey,
Sudhir K. Pandey
Abstract:
Fabrication and characterization of instrument for high-temperature simultaneous measurement of Seebeck coefficient (S) and thermal conductivity ($κ$) has been carried out with python automation. The steady-state based Fourier's law of thermal conduction is employed for $κ$ measurement. The parallel thermal conductance technique is implemented for heat loss measurement. Introducing the thin heater…
▽ More
Fabrication and characterization of instrument for high-temperature simultaneous measurement of Seebeck coefficient (S) and thermal conductivity ($κ$) has been carried out with python automation. The steady-state based Fourier's law of thermal conduction is employed for $κ$ measurement. The parallel thermal conductance technique is implemented for heat loss measurement. Introducing the thin heater and insulating heater base minimize the heat loss and make the way easier to arrive at high temperature. Measurement of S is carried out using differential method. Same thermocouples are used to measure temperature as well as voltage for S measurement. Care of temperature dependent S of thermocouple has also been taken. Simple design, small size, lightweightmake this instrument more robust. All the components for making sample holder are easily available in the market and can be replaced as per the user demand. This instrument can measure samples with various dimensions and shapes in the temperature range 300 $-$ 800 K. The instrument is validated using different class of samples, such as nickel, gadolinium, Fe$_{2}$VAl and LaCoO$_{3}$. Wide range of S from $\sim$ $-$20 to $\sim$600 $μ$V/K and $κ$ from $\sim$1.1 to $\sim$23.5 W/m-K are studied. The measured values of S and k are in good agreement with the reported data.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Effect of Foam Insertion in Aneurysm Sac on Flow Structures in Parent Lumen: Relating Vortex Structures with Disturbed Shear
Authors:
Pawan Kumar Pandey,
Malay Kumar Das
Abstract:
Numerous studies suggest that disturbed shear, causing endothelium dysfunction, can be related to neighboring vortex structures. With this motivation, this study presents a methodology to characterize the vortex structures. Precisely, we use map** and characterization of vortex structures' changes to relate it with the hemodynamic indicators of disturbed shear. Topological features of vortex cor…
▽ More
Numerous studies suggest that disturbed shear, causing endothelium dysfunction, can be related to neighboring vortex structures. With this motivation, this study presents a methodology to characterize the vortex structures. Precisely, we use map** and characterization of vortex structures' changes to relate it with the hemodynamic indicators of disturbed shear. Topological features of vortex core lines (VCLs) are used to quantify the changes in vortex structures. We use the Sujudi-Haimes algorithm to extract the VCLs from the flow simulation results. The idea of relating vortex structures with disturbed shear is demonstrated for cerebral arteries with aneurysms virtually treated by inserting foam in the sac. To get physiologically realistic flow fields, we simulate blood flow in two patient-specific geometries before and after foam insertion, with realistic velocity waveform imposed at the inlet, using the Carreau-Yashuda model to mimic the shear-thinning behavior. With homogenous porous medium assumption, flow through the foam is modeled using the Forcheimmer-Brinkmann extended Darcy model. Results show that foam insertion increases the number of VCLs in the parent lumen. The average length of VCL increases by 168.9% and 55.6% in both geometries. For both geometries under consideration, results demonstrate that the region with increased disturbed shear lies in the same arterial segment exhibiting an increase in the number of oblique VCLs. Based on the findings, we conjecture that an increase in oblique VCLs is related to increased disturbed shear at the neighboring portion of the arterial wall.
△ Less
Submitted 27 June, 2021;
originally announced June 2021.
-
Orthogonal-Padé Activation Functions: Trainable Activation functions for smooth and faster convergence in deep networks
Authors:
Koushik Biswas,
Shilpak Banerjee,
Ashish Kumar Pandey
Abstract:
We have proposed orthogonal-Padé activation functions, which are trainable activation functions and show that they have faster learning capability and improves the accuracy in standard deep learning datasets and models. Based on our experiments, we have found two best candidates out of six orthogonal-Padé activations, which we call safe Hermite-Pade (HP) activation functions, namely HP-1 and HP-2.…
▽ More
We have proposed orthogonal-Padé activation functions, which are trainable activation functions and show that they have faster learning capability and improves the accuracy in standard deep learning datasets and models. Based on our experiments, we have found two best candidates out of six orthogonal-Padé activations, which we call safe Hermite-Pade (HP) activation functions, namely HP-1 and HP-2. When compared to ReLU, HP-1 and HP-2 has an increment in top-1 accuracy by 5.06% and 4.63% respectively in PreActResNet-34, by 3.02% and 2.75% respectively in MobileNet V2 model on CIFAR100 dataset while on CIFAR10 dataset top-1 accuracy increases by 2.02% and 1.78% respectively in PreActResNet-34, by 2.24% and 2.06% respectively in LeNet, by 2.15% and 2.03% respectively in Efficientnet B0.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Search for the chiral magnetic effect via charge-dependent azimuthal correlations relative to spectator and participant planes in Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV
Authors:
STAR Collaboration,
M. S. Abdallah,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (365 additional authors not shown)
Abstract:
The chiral magnetic effect (CME) refers to charge separation along a strong magnetic field due to imbalanced chirality of quarks in local parity and charge-parity violating domains in quantum chromodynamics. The experimental measurement of the charge separation is made difficult by the presence of a major background from elliptic azimuthal anisotropy. This background and the CME signal have differ…
▽ More
The chiral magnetic effect (CME) refers to charge separation along a strong magnetic field due to imbalanced chirality of quarks in local parity and charge-parity violating domains in quantum chromodynamics. The experimental measurement of the charge separation is made difficult by the presence of a major background from elliptic azimuthal anisotropy. This background and the CME signal have different sensitivities to the spectator and participant planes, and could thus be determined by measurements with respect to these planes. We report such measurements in Au+Au collisions at a nucleon-nucleon center-of-mass energy of 200 GeV at the Relativistic Heavy-Ion Collider. It is found that the charge separation, with the flow background removed, is consistent with zero in peripheral (large impact parameter) collisions. Some indication of finite CME signals is seen in mid-central (intermediate impact parameter) collisions. Significant residual background effects may, however, still be present.
△ Less
Submitted 17 September, 2022; v1 submitted 17 June, 2021;
originally announced June 2021.
-
3D Semantic Map** from Arthroscopy using Out-of-distribution Pose and Depth and In-distribution Segmentation Training
Authors:
Yaqub Jonmohamadi,
Shahnewaz Ali,
Fengbei Liu,
Jonathan Roberts,
Ross Crawford,
Gustavo Carneiro,
Ajay K. Pandey
Abstract:
Minimally invasive surgery (MIS) has many documented advantages, but the surgeon's limited visual contact with the scene can be problematic. Hence, systems that can help surgeons navigate, such as a method that can produce a 3D semantic map, can compensate for the limitation above. In theory, we can borrow 3D semantic map** techniques developed for robotics, but this requires finding solutions t…
▽ More
Minimally invasive surgery (MIS) has many documented advantages, but the surgeon's limited visual contact with the scene can be problematic. Hence, systems that can help surgeons navigate, such as a method that can produce a 3D semantic map, can compensate for the limitation above. In theory, we can borrow 3D semantic map** techniques developed for robotics, but this requires finding solutions to the following challenges in MIS: 1) semantic segmentation, 2) depth estimation, and 3) pose estimation. In this paper, we propose the first 3D semantic map** system from knee arthroscopy that solves the three challenges above. Using out-of-distribution non-human datasets, where pose could be labeled, we jointly train depth+pose estimators using selfsupervised and supervised losses. Using an in-distribution human knee dataset, we train a fully-supervised semantic segmentation system to label arthroscopic image pixels into femur, ACL, and meniscus. Taking testing images from human knees, we combine the results from these two systems to automatically create 3D semantic maps of the human knee. The result of this work opens the pathway to the generation of intraoperative 3D semantic map**, registration with pre-operative data, and robotic-assisted arthroscopy
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Measurement of the Sixth-Order Cumulant of Net-Proton Multiplicity Distributions in Au+Au Collisions at $\sqrt{s_{\rm NN}}=$ 27, 54.4, and 200 GeV at RHIC
Authors:
STAR Collaboration,
M. S. Abdallah,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (369 additional authors not shown)
Abstract:
According to first principle Lattice QCD calculations, the transition from quark-gluon plasma to hadronic matter is a smooth crossover in the region $μ_{\rm B}\leq T_{c}$. In this range the ratio, $C_{6}/C_{2}$, of net-baryon distributions are predicted to be negative. In this paper, we report the first measurement of the midrapidity net-proton $C_{6}/C_{2}$ from 27, 54.4 and 200 GeV Au+Au collisi…
▽ More
According to first principle Lattice QCD calculations, the transition from quark-gluon plasma to hadronic matter is a smooth crossover in the region $μ_{\rm B}\leq T_{c}$. In this range the ratio, $C_{6}/C_{2}$, of net-baryon distributions are predicted to be negative. In this paper, we report the first measurement of the midrapidity net-proton $C_{6}/C_{2}$ from 27, 54.4 and 200 GeV Au+Au collisions at RHIC. The dependence on collision centrality and kinematic acceptance in ($p_{T}$, $y$) are analyzed. While for 27 and 54.4 GeV collisions the $C_{6}/C_{2}$ values are close to zero within uncertainties, it is observed that for 200 GeV collisions, the $C_{6}/C_{2}$ ratio becomes progressively negative from peripheral to central collisions. Transport model calculations without critical dynamics predict mostly positive values except for the most central collisions within uncertainties. These observations seem to favor a smooth crossover in the high energy nuclear collisions at top RHIC energy.
△ Less
Submitted 21 December, 2021; v1 submitted 31 May, 2021;
originally announced May 2021.
-
Homodyne detection of a two-photon resonance assisted by cooperative emission
Authors:
Chetan Sriram Madasu,
Chang Chi Kwong,
David Wilkowski,
Kanhaiya Pandey
Abstract:
Focusing on the transient regime, we explore atomic two-photon spectroscopy with self-aligned homodyne interferometry in a $Λ$-system with large optical depth. The two light sources at the origin of the interference are the single-photon transient transmission of the probe, and the slow light of the electromagnetically induced transparency. By switching off the probe laser abruptly (flash effect),…
▽ More
Focusing on the transient regime, we explore atomic two-photon spectroscopy with self-aligned homodyne interferometry in a $Λ$-system with large optical depth. The two light sources at the origin of the interference are the single-photon transient transmission of the probe, and the slow light of the electromagnetically induced transparency. By switching off the probe laser abruptly (flash effect), the transient transmission signal is reinforced by cooperativity, showing enhanced sensitivity to the two-photon frequency detuning. If the probe laser is periodically switched on and off, the amplitude of the transmission signal varies and remains large even for high modulation frequency. This technique has potential applications in sensing, such as magnetometry and velocimetry, and in coherent population trap** clocks.
△ Less
Submitted 5 January, 2022; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Controlled bi-directional quantum teleportation of superposed coherent state using five qubit cluster-type entangled coherent state as a resource
Authors:
Ravi Kamal Pandey,
Phool Singh Yadav,
Ranjana Prakash,
Hari Prakash
Abstract:
We consider the problem of bi-directional controlled quantum teleportation of information encoded in phase opposite coherent state among two distant partners Alice and Bob, with the consent of controller, Charlie. We use five-mode cluster-type entangled coherent state as the quantum resource to achieve this task. The scheme uses linear optical devices such as beam splitter, phase shifters, and pho…
▽ More
We consider the problem of bi-directional controlled quantum teleportation of information encoded in phase opposite coherent state among two distant partners Alice and Bob, with the consent of controller, Charlie. We use five-mode cluster-type entangled coherent state as the quantum resource to achieve this task. The scheme uses linear optical devices such as beam splitter, phase shifters, and photon counters. We have shown that for moderately large coherent amplitude, near-perfect bi-directional controlled teleportation can be obtained in terms of the average fidelity of teleportation.
△ Less
Submitted 14 December, 2021; v1 submitted 2 May, 2021;
originally announced May 2021.
-
Chandrayaan-2 Dual-Frequency SAR (DFSAR): Performance Characterization and Initial Results
Authors:
Sriram S. Bhiravarasu,
Tathagata Chakraborty,
Deepak Putrevu,
Dharmendra K. Pandey,
Anup K. Das,
V. M. Ramanujam,
Raghav Mehra,
Parikshit Parasher,
Krishna M. Agrawal,
Shubham Gupta,
Gaurav S. Seth,
Amit Shukla,
Nikhil Y. Pandya,
Sanjay Trivedi,
Arundhati Misra,
Rajeev Jyoti,
Raj Kumar
Abstract:
The Dual-Frequency synthetic aperture radar (DFSAR) system manifested on the Chandrayaan-2 spacecraft represents a significant step forward in radar exploration of solid solar system objects. It combines SAR at two wavelengths (L- and S-bands) and multiple resolutions with several polarimetric modes in one lightweight ($\sim$ 20 kg) package. The resulting data from DFSAR support calculation of the…
▽ More
The Dual-Frequency synthetic aperture radar (DFSAR) system manifested on the Chandrayaan-2 spacecraft represents a significant step forward in radar exploration of solid solar system objects. It combines SAR at two wavelengths (L- and S-bands) and multiple resolutions with several polarimetric modes in one lightweight ($\sim$ 20 kg) package. The resulting data from DFSAR support calculation of the 2$\times$2 complex scattering matrix for each resolution cell, which enables lunar near surface characterization in terms of radar polarization properties at different wavelengths and incidence angles. In this paper, we report on the calibration and preliminary performance characterization of DFSAR data based on the analysis of a sample set of crater regions on the Moon. Our calibration analysis provided a means to compare on-orbit performance with pre-launch measurements and the results matched with the pre-launch expected values. Our initial results show that craters in both permanently shadowed regions (PSRs) and non-PSRs that are classified as Circular Polarization Ratio (CPR)-anomalous in previous S-band radar analyses appear anomalous at L-band also. We also observe that material evolution and physical properties at their interior and proximal ejecta are decoupled. For Byrgius C crater region, we compare our analysis of dual-frequency radar data with the predicted behaviours of theoretical scattering models. If crater age estimates are available, comparison of their radar polarization properties at multiple wavelengths similar to that of the three unnamed south polar crater regions shown in this study may provide new insights into how the rockiness of craters evolves with time.
△ Less
Submitted 29 April, 2021;
originally announced April 2021.
-
Three Dimensional Simulation of Oscillatory Flow in Partial Porous Tube
Authors:
Pawan Kumar Pandey,
Malay Kumar Das
Abstract:
Characteristics of Oscillating Flow in a Straight Tube with varying thickness of porous layer at the wall is studied. Results for two different porous layer is discussed and compared in terms of Velocity Profile, phase differences and radial position of maximum velocity over the cross-section. Present problem is modeled using Navier-Stokes Equation in clear medium at the core of tube while Darcy-B…
▽ More
Characteristics of Oscillating Flow in a Straight Tube with varying thickness of porous layer at the wall is studied. Results for two different porous layer is discussed and compared in terms of Velocity Profile, phase differences and radial position of maximum velocity over the cross-section. Present problem is modeled using Navier-Stokes Equation in clear medium at the core of tube while Darcy-BrinkmannForcheimmer Model is used for the outer porous layer. Solutions for these equations have been obtained using Finite Volume Method based 3D unstructured solver. Velocity profile obtained for tube with high permeability porous layer is the main highlight of results.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Highly sensitive spin-flop transition in antiferromagnetic van-der Waals material MPS3 (M = Ni and Mn)
Authors:
Rabindra Basnet,
Aaron Wegner,
Krishna Pandey,
Stephen Storment,
** Hu
Abstract:
Recent developments in two-dimensional (2D) magnetism have motivated the search for novel van-der Waals (vdWs) magnetic materials to explore new magnetic phenomenon in the 2D limit. Metal thiophosphates, MPX3, is a class of magnetic vdWs materials with antiferromagnetic (AFM) ordering persisting down to the atomically thin limit. The magnetism in this material family has been found to be highly de…
▽ More
Recent developments in two-dimensional (2D) magnetism have motivated the search for novel van-der Waals (vdWs) magnetic materials to explore new magnetic phenomenon in the 2D limit. Metal thiophosphates, MPX3, is a class of magnetic vdWs materials with antiferromagnetic (AFM) ordering persisting down to the atomically thin limit. The magnetism in this material family has been found to be highly dependent on the choice of transition metal M. In this work, we have synthesized the intermediate compounds Ni1-xMnxPS3 (0 < x < 1) and investigated their magnetic properties. Our study reveals that the variation of Ni and Mn content in Ni1-xMnxPS3 can efficiently tune the spin-flop transition, likely due to the modulation of the magnetic anisotropy. Such effective tunning offers a promising candidate to engineer 2D magnetism for future device applications.
△ Less
Submitted 25 April, 2021;
originally announced April 2021.
-
Multivariate fractal interpolation functions: Some approximation aspects and an associated fractal interpolation operator
Authors:
K. K. Pandey,
P. Viswanathan
Abstract:
The natural kinship between classical theories of interpolation and approximation is well explored. In contrast to this, the interrelation between interpolation and approximation is subtle and this duality is relatively obscure in the context of fractal interpolation. The notion of $α$-fractal function provides a proper foundation for the approximation theoretic facet of univariate fractal interpo…
▽ More
The natural kinship between classical theories of interpolation and approximation is well explored. In contrast to this, the interrelation between interpolation and approximation is subtle and this duality is relatively obscure in the context of fractal interpolation. The notion of $α$-fractal function provides a proper foundation for the approximation theoretic facet of univariate fractal interpolation functions (FIFs). However, no comparable approximation theoretic aspects of FIFs has been developed for functions of several variables. The current article intends to open the door for intriguing interaction between approximation theory and multivariate FIFs. To this end, in the first part of this article, we develop a general framework to construct multivariate FIF, which is amenable to provide a multivariate analogue of the $α$-fractal function. Multivariate $α$-fractal functions provide a parameterized family of fractal approximants associated to a given multivariate continuous function. Some elementary aspects of the multivariate fractal nonlinear (not necessarily linear) interpolation operator that sends a continuous function defined on a hyper-rectangle to its fractal analogue is studied.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Photometric observations of NGC 281: Detection of 228 variable stars
Authors:
Sneh Lata,
A. K. Pandey,
J. C. Pandey,
Neelam Panwar,
Paulomi Paul
Abstract:
We identify 228 periodic variables in the region of young open cluster NGC 281 using time series photometry carried out from 1 m class ARIES telescopes, Nainital. The cluster membership of these identified variables is determined on the basis colour-magnitude, two colour diagrams and kinematic data. Eighty one variable stars are found to be members of the cluster NGC 281. Of 81 variables, 30 and 5…
▽ More
We identify 228 periodic variables in the region of young open cluster NGC 281 using time series photometry carried out from 1 m class ARIES telescopes, Nainital. The cluster membership of these identified variables is determined on the basis colour-magnitude, two colour diagrams and kinematic data. Eighty one variable stars are found to be members of the cluster NGC 281. Of 81 variables, 30 and 51 are probable main-sequence and pre-main-sequence members, respectively. Present study classifies main-sequence variable stars into different variability types according to their periods of variability, shape of light curves and location in the Hertzsprung-Russell diagram. These identified main-sequence variables could be $β$ Cep, $δ$ Scuti, slowly pulsating B type and new class variables. Among 51 pre-main-sequence variables, majority of them are weak line T Tauri stars. The remaining 147 variables could belong to the field population. The variability characteristics of the field population indicate that these variables could be RR Lyrae, $δ$ Scuti and binaries type variables.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
Prediction of Landfall Intensity, Location, and Time of a Tropical Cyclone
Authors:
Sandeep Kumar,
Koushik Biswas,
Ashish Kumar Pandey
Abstract:
The prediction of the intensity, location and time of the landfall of a tropical cyclone well advance in time and with high accuracy can reduce human and material loss immensely. In this article, we develop a Long Short-Term memory based Recurrent Neural network model to predict intensity (in terms of maximum sustained surface wind speed), location (latitude and longitude), and time (in hours afte…
▽ More
The prediction of the intensity, location and time of the landfall of a tropical cyclone well advance in time and with high accuracy can reduce human and material loss immensely. In this article, we develop a Long Short-Term memory based Recurrent Neural network model to predict intensity (in terms of maximum sustained surface wind speed), location (latitude and longitude), and time (in hours after the observation period) of the landfall of a tropical cyclone which originates in the North Indian ocean. The model takes as input the best track data of cyclone consisting of its location, pressure, sea surface temperature, and intensity for certain hours (from 12 to 36 hours) anytime during the course of the cyclone as a time series and then provide predictions with high accuracy. For example, using 24 hours data of a cyclone anytime during its course, the model provides state-of-the-art results by predicting landfall intensity, time, latitude, and longitude with a mean absolute error of 4.24 knots, 4.5 hours, 0.24 degree, and 0.37 degree respectively, which resulted in a distance error of 51.7 kilometers from the landfall location. We further check the efficacy of the model on three recent devastating cyclones Bulbul, Fani, and Gaja, and achieved better results than the test dataset.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Predicting Landfall's Location and Time of a Tropical Cyclone Using Reanalysis Data
Authors:
Sandeep Kumar,
Koushik Biswas,
Ashish Kumar Pandey
Abstract:
Landfall of a tropical cyclone is the event when it moves over the land after crossing the coast of the ocean. It is important to know the characteristics of the landfall in terms of location and time, well advance in time to take preventive measures timely. In this article, we develop a deep learning model based on the combination of a Convolutional Neural network and a Long Short-Term memory net…
▽ More
Landfall of a tropical cyclone is the event when it moves over the land after crossing the coast of the ocean. It is important to know the characteristics of the landfall in terms of location and time, well advance in time to take preventive measures timely. In this article, we develop a deep learning model based on the combination of a Convolutional Neural network and a Long Short-Term memory network to predict the landfall's location and time of a tropical cyclone in six ocean basins of the world with high accuracy. We have used high-resolution spacial reanalysis data, ERA5, maintained by European Center for Medium-Range Weather Forecasting (ECMWF). The model takes any 9 hours, 15 hours, or 21 hours of data, during the progress of a tropical cyclone and predicts its landfall's location in terms of latitude and longitude and time in hours. For 21 hours of data, we achieve mean absolute error for landfall's location prediction in the range of 66.18 - 158.92 kilometers and for landfall's time prediction in the range of 4.71 - 8.20 hours across all six ocean basins. The model can be trained in just 30 to 45 minutes (based on ocean basin) and can predict the landfall's location and time in a few seconds, which makes it suitable for real time prediction.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Invariant Jet Mass Measurements in $pp$ Collisions at $\sqrt{s} = 200$ GeV at RHIC
Authors:
STAR Collaboration,
M. S. Abdallah,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (365 additional authors not shown)
Abstract:
We present the first inclusive measurements of the invariant and SoftDrop jet mass in proton-proton collisions at $\sqrt{s}=200$ GeV at STAR. The measurements are fully corrected for detector effects, and reported differentially in both the jet transverse momentum and jet radius parameter. We compare the measurements to established leading-order Monte Carlo event generators and find that STAR-tune…
▽ More
We present the first inclusive measurements of the invariant and SoftDrop jet mass in proton-proton collisions at $\sqrt{s}=200$ GeV at STAR. The measurements are fully corrected for detector effects, and reported differentially in both the jet transverse momentum and jet radius parameter. We compare the measurements to established leading-order Monte Carlo event generators and find that STAR-tuned PYTHIA-6 reproduces the data, while LHC tunes of PYTHIA-8 and HERWIG-7 do not agree with the data, providing further constraints on parameter tuning. Finally, we observe that SoftDrop grooming, for which the contribution of wide-angle non-perturbative radiation is suppressed, shifts the jet mass distributions into closer agreement with the partonic jet mass as determined by both PYTHIA-8 and a next-to-leading-logarithmic accuracy perturbative QCD calculation. These measurements complement recent LHC measurements in a different kinematic region, as well as establish a baseline for future jet mass measurements in heavy-ion collisions at RHIC.
△ Less
Submitted 15 September, 2021; v1 submitted 24 March, 2021;
originally announced March 2021.
-
Azimuthal anisotropy measurements of strange and multistrange hadrons in U+U collisions at $\sqrt{s_{NN}} = 193$ GeV at the BNL Relativistic Heavy Ion Collider
Authors:
STAR Collaboration,
M. S. Abdallah,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (370 additional authors not shown)
Abstract:
We present systematic measurements of azimuthal anisotropy for strange and multistrange hadrons ($K^{0}_{s}$, $Λ$, $Ξ$, and $Ω$) and $φ$ mesons at midrapidity ($|y| <$ 1.0) in collisions of U + U nuclei at $\sqrt{s_{NN}} = 193$ GeV, recorded by the STAR detector at the Relativistic Heavy Ion Collider. Transverse momentum ($p_{\text{T}}$) dependence of flow coefficients ($v_{2}$, $v_{3}$, and…
▽ More
We present systematic measurements of azimuthal anisotropy for strange and multistrange hadrons ($K^{0}_{s}$, $Λ$, $Ξ$, and $Ω$) and $φ$ mesons at midrapidity ($|y| <$ 1.0) in collisions of U + U nuclei at $\sqrt{s_{NN}} = 193$ GeV, recorded by the STAR detector at the Relativistic Heavy Ion Collider. Transverse momentum ($p_{\text{T}}$) dependence of flow coefficients ($v_{2}$, $v_{3}$, and $v_{4}$) is presented for minimum bias collisions and three different centrality intervals. Number of constituent quark scaling of the measured flow coefficients in U + U collisions is discussed. We also present the ratio of $v_{n}$ scaled by the participant eccentricity ($\varepsilon_{n}\left\lbrace 2 \right\rbrace$) to explore system size dependence and collectivity in U + U collisions. The magnitude of $v_{2}/\varepsilon_{2}$ is found to be smaller in U + U collisions than that in central Au + Au collisions contradicting naive eccentricity scaling. Furthermore, the ratios between various flow harmonics ($v_{3}/v_{2}^{3/2}$, $v_{4}/v_{2}^{4/2}$) are studied and compared with hydrodynamic and transport model calculations.
△ Less
Submitted 18 June, 2021; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Search Disaster Victims using Sound Source Localization
Authors:
Abhish Khanal,
Deepak Chand,
Prakash Chaudhary,
Subash Timilsina,
Sanjeeb Prasad Panday,
Aman Shakya,
Rom Kant Pandey
Abstract:
Sound Source Localization (SSL) are used to estimate the position of sound sources. Various methods have been used for detecting sound and its localization. This paper presents a system for stationary sound source localization by cubical microphone array consisting of eight microphones placed on four vertical adjacent faces which is mounted on three wheel omni-directional drive for the inspection…
▽ More
Sound Source Localization (SSL) are used to estimate the position of sound sources. Various methods have been used for detecting sound and its localization. This paper presents a system for stationary sound source localization by cubical microphone array consisting of eight microphones placed on four vertical adjacent faces which is mounted on three wheel omni-directional drive for the inspection and monitoring of the disaster victims in disaster areas. The proposed method localizes sound source on a 3D space by grid search method using Generalized Cross Correlation Phase Transform (GCC-PHAT) which is robust when operating in real life scenario where there is lack of visibility. The computed azimuth and elevation angle of victimized human voice are fed to embedded omni-directional drive system which navigates the vehicle automatically towards the stationary sound source.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
BFFT Nonlinear Constraints Abelianization of a Prototypical Second-Class System
Authors:
Vipul Kumar Pandey,
Ronaldo Thibes
Abstract:
We apply the BFFT formalism to a prototypical second-class system, aiming to convert its constraints from second- to first-class. The proposed system admits a consistent initial set of second-class constraints and an open potential function providing room for applications to mechanical models as well as field theory such as the non-linear sigma model. The constraints can be arbitralily non-linear,…
▽ More
We apply the BFFT formalism to a prototypical second-class system, aiming to convert its constraints from second- to first-class. The proposed system admits a consistent initial set of second-class constraints and an open potential function providing room for applications to mechanical models as well as field theory such as the non-linear sigma model. The constraints can be arbitralily non-linear, broadly generalizing previously known cases. We obtain a sufficient condition for which a simple closed expression for the Abelian converted constraints and modified involutive Hamiltonian can be achieved. As explicit examples, we discuss a particle on a torus and a spontaneous Lorentz symmetry breaking vector model, obtaining in both situations the full first-class abelianized constraints in closed form and the corresponding involutive Hamiltonian.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Longitudinal double-spin asymmetry for inclusive jet and dijet production in polarized proton collisions at $\sqrt{s}=200$ GeV
Authors:
STAR Collaboration,
M. S. Abdallah,
J. Adam,
L. Adamczyk,
J. R. Adams,
J. K. Adkins,
G. Agakishiev,
I. Aggarwal,
M. M. Aggarwal,
Z. Ahammed,
I. Alekseev,
D. M. Anderson,
A. Aparin,
E. C. Aschenauer,
M. U. Ashraf,
F. G. Atetalla,
A. Attri,
G. S. Averichev,
V. Bairathi,
W. Baker,
J. G. Ball Cap,
K. Barish,
A. Behera,
R. Bellwied,
P. Bhagat
, et al. (366 additional authors not shown)
Abstract:
We report high-precision measurements of the longitudinal double-spin asymmetry, $A_{LL}$, for midrapidity inclusive jet and dijet production in polarized $pp$ collisions at a center-of-mass energy of $\sqrt{s}=200\,\mathrm{GeV}$. The new inclusive jet data are sensitive to the gluon helicity distribution, $Δg(x,Q^2)$, for gluon momentum fractions in the range from $x \simeq 0.05$ to…
▽ More
We report high-precision measurements of the longitudinal double-spin asymmetry, $A_{LL}$, for midrapidity inclusive jet and dijet production in polarized $pp$ collisions at a center-of-mass energy of $\sqrt{s}=200\,\mathrm{GeV}$. The new inclusive jet data are sensitive to the gluon helicity distribution, $Δg(x,Q^2)$, for gluon momentum fractions in the range from $x \simeq 0.05$ to $x \simeq 0.5$, while the new dijet data provide further constraints on the $x$ dependence of $Δg(x,Q^2)$. The results are in good agreement with previous measurements at $\sqrt{s}=200\,\mathrm{GeV}$ and with recent theoretical evaluations of prior world data. Our new results have better precision and thus strengthen the evidence that $Δg(x,Q^2)$ is positive for $x > 0.05$.
△ Less
Submitted 28 May, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
Arthroscopic Multi-Spectral Scene Segmentation Using Deep Learning
Authors:
Shahnewaz Ali,
Dr. Yaqub Jonmohamadi,
Yu Takeda,
Jonathan Roberts,
Ross Crawford,
Cameron Brown,
Dr. Ajay K. Pandey
Abstract:
Knee arthroscopy is a minimally invasive surgical (MIS) procedure which is performed to treat knee-joint ailment. Lack of visual information of the surgical site obtained from miniaturized cameras make this surgical procedure more complex. Knee cavity is a very confined space; therefore, surgical scenes are captured at close proximity. Insignificant context of knee atlas often makes them unrecogni…
▽ More
Knee arthroscopy is a minimally invasive surgical (MIS) procedure which is performed to treat knee-joint ailment. Lack of visual information of the surgical site obtained from miniaturized cameras make this surgical procedure more complex. Knee cavity is a very confined space; therefore, surgical scenes are captured at close proximity. Insignificant context of knee atlas often makes them unrecognizable as a consequence unintentional tissue damage often occurred and shows a long learning curve to train new surgeons. Automatic context awareness through labeling of the surgical site can be an alternative to mitigate these drawbacks. However, from the previous studies, it is confirmed that the surgical site exhibits several limitations, among others, lack of discriminative contextual information such as texture and features which drastically limits this vision task. Additionally, poor imaging conditions and lack of accurate ground-truth labels are also limiting the accuracy. To mitigate these limitations of knee arthroscopy, in this work we proposed a scene segmentation method that successfully segments multi structures.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.