-
Pressure drop reduction due to coupling between shear-thinning fluid flow and a weakly deformable channel wall: A reciprocal theorem approach
Authors:
Shrihari D. Pande,
Ivan C. Christov
Abstract:
We employ the Lorentz reciprocal theorem to derive a closed-form expression for the pressure drop reduction due to the coupling between shear-thinning fluid flow and a weakly deformable channel wall. The methodology is applied in parallel to fluids for which the generalized Newtonian viscosity depends on either the shear rate or the shear stress magnitude. The only limitation on the viscosity mode…
▽ More
We employ the Lorentz reciprocal theorem to derive a closed-form expression for the pressure drop reduction due to the coupling between shear-thinning fluid flow and a weakly deformable channel wall. The methodology is applied in parallel to fluids for which the generalized Newtonian viscosity depends on either the shear rate or the shear stress magnitude. The only limitation on the viscosity model is that it allows for a closed-form solution for the axial velocity profile in a straight and rigid channel. The power-law and Ellis viscosity models are considered as featured examples and to enable comparisons to previous works. The analytical expression obtained via the reciprocal theorem shows that the pressure drop reduction under the power-law model can also be obtained from the pressure drop reduction under the Ellis model in the regime of large Carreau number (small Ellis number).
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Reciprocal theorems for calculating the flow rate of oscillatory channel flows
Authors:
Shrihari D. Pande,
Evgeniy Boyko,
Ivan C. Christov
Abstract:
We demonstrate the use of the Lorentz reciprocal theorem in obtaining corrections to the flow rate for oscillatory flow in channels. We start from the unsteady Stokes equations and derive the suitable reciprocity relations for both rigid and deformable channels, assuming all quantities can be expressed as time-harmonic phasors. For the case of a rigid channel, the auxiliary problem is a steady flo…
▽ More
We demonstrate the use of the Lorentz reciprocal theorem in obtaining corrections to the flow rate for oscillatory flow in channels. We start from the unsteady Stokes equations and derive the suitable reciprocity relations for both rigid and deformable channels, assuming all quantities can be expressed as time-harmonic phasors. For the case of a rigid channel, the auxiliary problem is a steady flow solution, and the reciprocal theorem allows us to calculate the first-order correction in the Womersley number to the steady flow rate. For the case of a deformable channel, we account for the fluid--structure interaction using domain perturbation under the assumption of a small compliance number. Using the oscillatory flow solution in a rigid channel as the auxiliary problem, we obtain the first-order correction in the compliance number to the rigid channel flow rate. This correction, validated against numerical simulations, provides the leading-order effect of the interplay between the oscillations of the fluid flow and the compliance of the channel for arbitrary values of the Womersley number.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
Oscillatory flows in compliant conduits at arbitrary Womersley number
Authors:
Shrihari D. Pande,
Xiaojia Wang,
Ivan C. Christov
Abstract:
We develop a theory of fluid--structure interaction (FSI) between an oscillatory Newtonian fluid flow and a compliant conduit. We consider the canonical geometries of a 2D channel with a deformable top wall and an axisymmetric deformable tube. Focusing on the hydrodynamics, we employ a linear relationship between wall displacement and hydrodynamic pressure, which has been shown to be suitable for…
▽ More
We develop a theory of fluid--structure interaction (FSI) between an oscillatory Newtonian fluid flow and a compliant conduit. We consider the canonical geometries of a 2D channel with a deformable top wall and an axisymmetric deformable tube. Focusing on the hydrodynamics, we employ a linear relationship between wall displacement and hydrodynamic pressure, which has been shown to be suitable for a leading-order-in-slenderness theory. The slenderness assumption also allows the use of lubrication theory, and the flow rate is related to the pressure gradient (and the tube/wall deformation) via the classical solutions for oscillatory flow in a channel and in a tube (attributed to Womersley). Then, by two-way coupling the oscillatory flow and the wall deformation via the continuity equation, a one-dimensional nonlinear partial differential equation (PDE) governing the instantaneous pressure distribution along the conduit is obtained, without \textit{a priori} assumptions on the magnitude of the oscillation frequency (\textit{i.e.}, at arbitrary Womersley number). We find that the cycle-averaged pressure (for harmonic pressure-controlled conditions) deviates from the expected steady pressure distribution, suggesting the presence of a streaming flow. An analytical perturbative solution for a weakly deformable conduit is obtained to rationalize how FSI induces such streaming. In the case of a compliant tube, the results obtained from the proposed reduced-order PDE and its perturbative solutions are validated against three-dimensional, two-way-coupled direct numerical simulations. We find good agreement between theory and simulations for a range of dimensionless parameters characterizing the oscillatory flow and the FSI, demonstrating the validity of the proposed theory of oscillatory flows in compliant conduits at arbitrary Womersley number.
△ Less
Submitted 11 December, 2023; v1 submitted 2 April, 2023;
originally announced April 2023.
-
Reflectarray Design Using a Discrete Dipole Framework
Authors:
Aaron V. Diebold,
Divya Pande,
Christine Gregg,
David R. Smith
Abstract:
We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configuratio…
▽ More
We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configurations. This dipole framework serves as an alternative to the ray tracing model often used in reflectarray designs, in which rays are drawn from the feed point and scattered off of the patch elements. Whereas the ray tracing method solves the design problem in terms of phase delays, the dipole framework presented here has the potential to accurately design and predict beam patterns using a fully dipolar treatment of empirically characterized patches. We illustrate this technique by applying it to two modulation strategies: a variable patch size reflectarray in which the phase can be continuously tuned (grayscale patch response), and a fixed patch size (binary patch response) in which on/off modulation is achieved through selective patch electrical shorting. Methods for incorporating these cases into the dipole design framework are discussed and the results compared to those from full wave simulation.
△ Less
Submitted 29 November, 2022; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Flow rate--pressure drop relations for new configurations of slender compliant tubes arising in microfluidics experiments
Authors:
Xiaojia Wang,
Shrihari D. Pande,
Ivan C. Christov
Abstract:
We investigate the steady-state fluid--structure interaction between a Newtonian fluid flow and a deformable microtube in two novel geometric configurations arising in recent microfluidics experiments. The first configuration is a cylindrical fluidic channel surrounded by an annulus of soft material with a rigid outer wall, while the second one is a cylindrical fluidic channel extruded from a soft…
▽ More
We investigate the steady-state fluid--structure interaction between a Newtonian fluid flow and a deformable microtube in two novel geometric configurations arising in recent microfluidics experiments. The first configuration is a cylindrical fluidic channel surrounded by an annulus of soft material with a rigid outer wall, while the second one is a cylindrical fluidic channel extruded from a soft rectangular slab of material. In each configuration, we derive a mathematical theory for the nonlinear flow rate--pressure drop relation by coupling lubrication theory for the flow with linear elasticity for the inner tube wall's deformation. Using the flow conduit's axial slenderness and its axisymmetry, we obtain an analytical expression for the radial displacement in each configuration from a plane-strain configuration. The predicted displacement field, and the resulting closed-form flow rate--pressure drop relation, are each validated against three-dimensional direct numerical simulations via SimVascular's two-way-coupled fluid--structure interaction solver, svFSI, showing good agreement. We also show that weak flow inertia can be easily incorporated in the derivation, further improving the agreement between theory and simulations for larger imposed flow rates.
△ Less
Submitted 11 November, 2022; v1 submitted 22 May, 2022;
originally announced May 2022.
-
Surface gravities for 15,000 Kepler stars measured from stellar granulation and validated with Gaia DR2 parallaxes
Authors:
Durlabh Pande,
Timothy R. Bedding,
Daniel Huber,
Hans Kjeldsen
Abstract:
We have developed a method to estimate surface gravity (log g) from light curves by measuring the granulation background, similar to the "flicker" method by Bastien et al. (2016) but working in the Fourier power spectrum. We calibrated the method using Kepler stars for which asteroseismology has been possible with short-cadence data, demonstrating a precision in log g of about 0.05 dex. We also de…
▽ More
We have developed a method to estimate surface gravity (log g) from light curves by measuring the granulation background, similar to the "flicker" method by Bastien et al. (2016) but working in the Fourier power spectrum. We calibrated the method using Kepler stars for which asteroseismology has been possible with short-cadence data, demonstrating a precision in log g of about 0.05 dex. We also derived a correction for white noise as a function of Kepler magnitude by measuring white noise directly from observations. We then applied the method to the same sample of long-cadence stars as Bastien et al. We found that about half the stars are too faint for the granulation background to be reliably detected above the white noise. We provide a catalogue of log g values for about 15,000 stars having uncertainties better than 0.5 dex. We used Gaia DR2 parallaxes to validate that granulation is a powerful method to measure log g from light curves. Our method can also be applied to the large number of light curves collected by K2 and TESS.
△ Less
Submitted 12 July, 2018; v1 submitted 10 July, 2018;
originally announced July 2018.
