-
Probing the nanoscale origin of strain and do** in graphene-hBN heterostructures
Authors:
Tom Vincent,
Vishal Panchal,
Tim Booth,
Stephen R. Power,
Antti-Pekka Jauho,
Vladimir Antonov,
Olga Kazakova
Abstract:
We use confocal Raman microscopy and modified vector analysis methods to investigate the nanoscale origin of strain and carrier concentration in exfoliated graphene-hexagonal boron nitride (hBN) heterostructures on silicon dioxide (SiO2). Two types of heterostructures are studied: graphene on SiO2 partially coved by hBN, and graphene fully encapsulated between two hBN flakes. We extend the vector…
▽ More
We use confocal Raman microscopy and modified vector analysis methods to investigate the nanoscale origin of strain and carrier concentration in exfoliated graphene-hexagonal boron nitride (hBN) heterostructures on silicon dioxide (SiO2). Two types of heterostructures are studied: graphene on SiO2 partially coved by hBN, and graphene fully encapsulated between two hBN flakes. We extend the vector analysis methods to produce spatial maps of the strain and do** variation across the heterostructures. This allows us to visualise and directly quantify the much-speculated effect of the environment on carrier concentration as well as strain in graphene. Moreover, we demonstrate that variations in strain and carrier concentration in graphene arise from nanoscale features of the heterostructures such as fractures, folds and bubbles trapped between layers. For bubbles in hBN-encapsulated graphene, hydrostatic strain is shown to be greatest at bubble centres, whereas the maximum of carrier concentration is localised at bubble edges. Raman spectroscopy is shown to be a non-invasive tool for probing strain and do** in graphene, which could prove useful for engineering of two-dimensional devices.
△ Less
Submitted 31 October, 2018;
originally announced October 2018.
-
Detection of ultra-low concentration NO2 in complex environment using epitaxial graphene sensors
Authors:
Christos Melios,
Vishal Panchal,
Kieran Edmonds,
Arseniy Lartsev,
Rositsa Yakimova,
Olga Kazakova
Abstract:
We demonstrate proof-of-concept graphene sensors for environmental monitoring of ultra-low concentration NO2 in complex environments. Robust detection in a wide range of NO2 concentrations, 10-154 ppb, was achieved, highlighting the great potential for graphene-based NO2 sensors, with applications in environmental pollution monitoring, portable monitors, automotive and mobile sensors for a global…
▽ More
We demonstrate proof-of-concept graphene sensors for environmental monitoring of ultra-low concentration NO2 in complex environments. Robust detection in a wide range of NO2 concentrations, 10-154 ppb, was achieved, highlighting the great potential for graphene-based NO2 sensors, with applications in environmental pollution monitoring, portable monitors, automotive and mobile sensors for a global real-time monitoring network. The measurements were performed in a complex environment, combining NO2/synthetic air/water vapour, traces of other contaminants and variable temperature in an attempt to fully replicate the environmental conditions of a working sensor. It is shown that the performance of the graphene-based sensor can be affected by co-adsorption of NO2 and water on the surface at low temperatures (<70 C). However, the sensitivity to NO2 increases significantly when the sensor operates at 150 C and the cross-selectivity to water, sulphur dioxide and carbon monoxide is minimized. Additionally, it is demonstrated that single-layer graphene exhibits two times higher carrier concentration response upon exposure to NO2 than bilayer graphene.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
Wide-Band Nano-Imaging of Plasmon Dispersion and Hotspots in Quasi-Free-Standing Epitaxial Graphene
Authors:
William S. Hart,
Vishal Panchal,
Christos Melios,
Włodek Strupiński,
Olga Kazakova,
Chris C. Phillips
Abstract:
We report observation of graphene plasmon interference fringes across a wide spectral range using a scattering scanning near-field optical microscope (s-SNOM) that employs a widely tunable bank of quantum cascade lasers. We use plasmon interference to measure the dispersion curve of graphene plasmons over more than an order of magnitude of plasmon wavelength, from $λ_{sp}$ ~140 to ~1700 nm, and ex…
▽ More
We report observation of graphene plasmon interference fringes across a wide spectral range using a scattering scanning near-field optical microscope (s-SNOM) that employs a widely tunable bank of quantum cascade lasers. We use plasmon interference to measure the dispersion curve of graphene plasmons over more than an order of magnitude of plasmon wavelength, from $λ_{sp}$ ~140 to ~1700 nm, and extract the electron Fermi energy of 298$\pm$4 meV for hydrogen-intercalated single layer epitaxial graphene on SiC. Furthermore, we demonstrate the appearance of wavelength tuneable graphene plasmon reflection "hotspots" at single-layer/bi-layer interfaces. This work demonstrates the capability of wide-band nano-imaging to precisely measure the electrical properties of graphene and spatially control plasmon reflection focusing.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Modeling of graphene Hall effect sensors for microbead detection
Authors:
A. Manzin,
E. Simonetto,
G. Amato,
V. Panchal,
O. Kazakova
Abstract:
This paper deals with the modeling of sensitivity of epitaxial graphene Hall bars, from sub-micrometer to micrometer size, to the stray field generated by a magnetic microbead. To demonstrate experiment feasibility, the model is first validated by comparison to measurement results, considering an ac-dc detection scheme. Then, an exhaustive numerical analysis is performed to investigate signal detr…
▽ More
This paper deals with the modeling of sensitivity of epitaxial graphene Hall bars, from sub-micrometer to micrometer size, to the stray field generated by a magnetic microbead. To demonstrate experiment feasibility, the model is first validated by comparison to measurement results, considering an ac-dc detection scheme. Then, an exhaustive numerical analysis is performed to investigate signal detriment caused by material defects, saturation of bead magnetization at high fields, increment of bead distance from sensor surface and device width increase.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Unique excitonic effects in tungsten disulphide monolayers on two-layer graphene
Authors:
Cristina E. Giusca,
Ivan Rungger,
Vishal Panchal,
Christos Melios,
Zhong Lin,
Yu-Chuan Lin,
Ethan Kahn,
Ana Laura Elías,
Joshua A. Robinson,
Mauricio Terrones,
Olga Kazakova
Abstract:
Light emission in atomically thin heterostructures is known to depend on the type of materials, number and stacking sequence of the constituent layers. Here we show that the thickness of a two-dimensional substrate can be crucial in modulating the light emission. We study the layer-dependent charge transfer in vertical heterostructures built from monolayer tungsten disulphide (WS2) on one- and two…
▽ More
Light emission in atomically thin heterostructures is known to depend on the type of materials, number and stacking sequence of the constituent layers. Here we show that the thickness of a two-dimensional substrate can be crucial in modulating the light emission. We study the layer-dependent charge transfer in vertical heterostructures built from monolayer tungsten disulphide (WS2) on one- and two-layer epitaxial graphene, unravelling the effect that the interlayer electronic coupling has on the excitonic properties of such heterostructures. We bring evidence that the excitonic properties of WS2 can be effectively tuned by the number of supporting graphene layers. Integrating WS2 monolayers with two-layer graphene leads to a significant enhancement of the photoluminescence response, up to one order of magnitude higher compared to WS2 supported on one-layer graphene. Our findings highlight the importance of substrate engineering when constructing atomically thin layered heterostructures.
△ Less
Submitted 27 April, 2018;
originally announced April 2018.
-
Water affinity to epitaxial graphene: the impact of layer thickness
Authors:
Cristina E. Giusca,
Vishal Panchal,
Martin Munz,
Virginia D. Wheeler,
Luke O. Nyakiti,
Rachael L. Myers-Ward,
D. Kurt Gaskill,
Olga Kazakova
Abstract:
The sensitivity to water of epitaxial graphene is examined in this study.
The sensitivity to water of epitaxial graphene is examined in this study.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Visualisation of edge effects in side-gated graphene nanodevices
Authors:
Vishal Panchal,
Arseniy Lartsev,
Alessandra Manzin,
Rositza Yakimova,
Alexander Tzalenchuk,
Olga Kazakova
Abstract:
Using local scanning electrical techniques we study edge effects in side-gated Hall nanodevices made of epitaxial graphene. We demonstrate that lithographically defined edges of the graphene channel exhibit hole conduction within the narrow band of ~60-125 nm width, whereas the bulk of the material is electron doped. The effect is the most pronounced when the influence of atmospheric contamination…
▽ More
Using local scanning electrical techniques we study edge effects in side-gated Hall nanodevices made of epitaxial graphene. We demonstrate that lithographically defined edges of the graphene channel exhibit hole conduction within the narrow band of ~60-125 nm width, whereas the bulk of the material is electron doped. The effect is the most pronounced when the influence of atmospheric contamination is minimal. We also show that the electronic properties at the edges can be precisely tuned from hole to electron conduction by using moderate strength electrical fields created by side-gates. However, the central part of the channel remains relatively unaffected by the side-gates and retains the bulk properties of graphene.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Calibration of multi-layered probes with low/high magnetic moments
Authors:
Vishal Panchal,
Hector Corte-Leon,
Boris Gribkov,
Luis Alfredo Rodriguez,
Etienne Snoeck,
Alessandra Manzin,
Enrico Simonetto,
Silvia Vock,
Volker Neu,
Olga Kazakova
Abstract:
We present a comprehensive method for visualisation and quantification of the magnetic stray field of magnetic force microscopy (MFM) probes, applied to the particular case of custom-made multi-layered probes with controllable high/low magnetic moment states. The probes consist of two decoupled magnetic layers separated by a non-magnetic interlayer, which results in four stable magnetic states: +/…
▽ More
We present a comprehensive method for visualisation and quantification of the magnetic stray field of magnetic force microscopy (MFM) probes, applied to the particular case of custom-made multi-layered probes with controllable high/low magnetic moment states. The probes consist of two decoupled magnetic layers separated by a non-magnetic interlayer, which results in four stable magnetic states: +/-ferromagnetic (FM) and +/-antiferromagnetic (A-FM). Direct visualisation of the stray field surrounding the probe apex using electron holography convincingly demonstrates a striking difference in the spatial distribution and strength of the magnetic flux in FM and A-FM states. In situ MFM studies of reference samples are used to determine the probe switching fields and spatial resolution. Furthermore, quantitative values of the probe magnetic moments are obtained by determining their real space tip transfer function (RSTTF). We also map the local Hall voltage in graphene Hall nanosensors induced by the probes in different states. The measured transport properties of nanosensors and RSTTF outcomes are introduced as an input in a numerical model of Hall devices to verify the probe magnetic moments. The modelling results fully match the experimental measurements, outlining an all-inclusive method for the calibration of complex magnetic probes with a controllable low/high magnetic moment.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Atmospheric do** effects in epitaxial graphene: correlation of local and global electrical measurements
Authors:
Vishal Panchal,
Cristina E. Giusca,
Arseniy Lartsev,
Nicholas A. Martin,
Nathan Cassidy,
Rachael L. Myers-Ward,
D. Kurt Gaskill,
Olga Kazakova
Abstract:
We directly correlate the local (20-nm scale) and global electronic properties of a device containing mono-, bi- and tri-layer epitaxial graphene (EG) domains on 6H-SiC(0001) by simultaneously performing local surface potential measurements using Kelvin probe force microscopy and global transport measurements. Using well-controlled environmental conditions, where the starting state of the surface…
▽ More
We directly correlate the local (20-nm scale) and global electronic properties of a device containing mono-, bi- and tri-layer epitaxial graphene (EG) domains on 6H-SiC(0001) by simultaneously performing local surface potential measurements using Kelvin probe force microscopy and global transport measurements. Using well-controlled environmental conditions, where the starting state of the surface can be reproducibly defined, we investigate the do** effects of N2, O2, water vapour and NO2 at concentrations representative of the ambient air. We show that presence of O2, water vapour and NO2 leads to p-do** of all EG domains. However, the thicker layers of EG are significantly less affected by the atmospheric dopants. Furthermore, we demonstrate that the general consensus of O2 and water vapour present in ambient air providing majority of the p-do** to graphene is a common misconception. We experimentally show that even the combined effect of O2, water vapour, and NO2 at concentrations higher than typically present in the atmosphere does not fully replicate the state of the EG surface in ambient air. All do** effects can be reproducibly reversed by vacuum annealing. Thus, for EG gas sensors it is essential to consider naturally occurring environmental effects and properly separate them from those coming from targeted species.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Water on graphene: Review of recent progress
Authors:
Christos Melios,
Cristina E. Giusca,
Vishal Panchal,
Olga Kazakova
Abstract:
The sensitivity of graphene to the surrounding environment is given by its π electrons, which are directly exposed to molecules in the ambient. The high sensitivity of graphene to the local environment has shown to be both advantageous but also problematic for graphene-based devices, such as transistors and sensors, where the graphene carrier concentration and mobility change due to ambient humidi…
▽ More
The sensitivity of graphene to the surrounding environment is given by its π electrons, which are directly exposed to molecules in the ambient. The high sensitivity of graphene to the local environment has shown to be both advantageous but also problematic for graphene-based devices, such as transistors and sensors, where the graphene carrier concentration and mobility change due to ambient humidity variations. In this review, recent progress in understanding the effects of water on different types of graphene, grown epitaxially and quasi-free standing on SiC, by chemical vapour deposition on SiO2, as well as exfoliated flakes, are presented. It is demonstrated that water withdraws electrons from graphene, but the graphene-water interaction highly depends on the thickness, layer stacking, underlying substrate and substrate-induced do**. Moreover, we highlight the importance of clear and unambiguous description of the environmental conditions (i.e. relative humidity) whenever a routine characterisation for carrier concentration and mobility is reported (often presented as a simple figure-of-merit), as these electrical characteristics are highly dependent on the adsorbed molecules and the surrounding environment.
△ Less
Submitted 26 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Tuning epitaxial graphene sensitivity to water by hydrogen intercalation
Authors:
Christos Melios,
Michael Winters,
Wlodek Strupinski,
Vishal Panchal,
Cristina E. Giusca,
K. D. G. Imalka Jayawardena,
Niklas Rorsman,
S. Ravi P. Silva,
Olga Kazakova
Abstract:
The effects of humidity on the electronic properties of quasi-free standing one layer graphene (QFS 1LG) are investigated via simultaneous magneto-transport in the van der Pauw geometry and local work function measurements in a controlled environment. QFS 1LG on 4H-SiC(0001) is obtained by hydrogen intercalation of the interfacial layer. In this system, the carrier concentration experiences a two-…
▽ More
The effects of humidity on the electronic properties of quasi-free standing one layer graphene (QFS 1LG) are investigated via simultaneous magneto-transport in the van der Pauw geometry and local work function measurements in a controlled environment. QFS 1LG on 4H-SiC(0001) is obtained by hydrogen intercalation of the interfacial layer. In this system, the carrier concentration experiences a two-fold increase in sensitivity to changes in relative humidity as compared to the as-grown epitaxial graphene. This enhanced sensitivity to water is attributed to the lowering of the hydrophobicity of QFS 1LG, which results from spontaneous polarization of 4H-SiC(0001) strongly influencing the graphene. Moreover, the superior carrier mobility of the QFS 1LG system is retained even at the highest humidity. The work function maps constructed from Kelvin probe force microscopy also revealed higher sensitivity to water for 1LG compared to 2LG in both QFS 1LG and as-grown systems. These results point to a new field of applications for QFS 1LG, i.e., as humidity sensors, and the corresponding need for metrology in calibration of graphene-based sensors and devices.
△ Less
Submitted 26 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Confocal laser scanning microscopy: A tool for rapid optical characterization of 2D materials
Authors:
Vishal Panchal,
Yanfei Yang,
Guangjun Cheng,
Jiuning Hu,
Mattias Kruskopf,
Chieh-I Liu,
Albert F. Rigosi,
Christos Melios,
Angela R. Hight Walker,
David B. Newell,
Olga Kazakova,
Randolph E. Elmquist
Abstract:
Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanc…
▽ More
Confocal laser scanning microscopy (CLSM) is a non-destructive, highly-efficient optical characterization method for large-area analysis of graphene on different substrates, which can be applied in ambient air, does not require additional sample preparation, and is insusceptible to surface charging and surface contamination. CLSM leverages optical properties of graphene and provides greatly enhanced optical contrast and map** of thickness down to a single layer. We demonstrate the effectiveness of CLSM by measuring mechanically exfoliated and chemical vapor deposition graphene on Si/SiO2, and epitaxial graphene on SiC. In the case of graphene on Si/SiO2, both CLSM intensity and height map** is powerful for analysis of 1-5 layers of graphene. For epitaxial graphene on SiC substrates, the CLSM intensity allows us to distinguish features such as dense, parallel 150 nm wide ribbons of graphene (associated with the early stages of the growth process) and large regions covered by the interfacial layer and 1-3 layers of graphene. In both cases, CLSM data shows excellent correlation with conventional optical microscopy, atomic force microscopy, Kelvin probe force microscopy, conductive atomic force microscopy, scanning electron microscopy and Raman map**, with a greatly reduced acquisition time. We demonstrate that CLSM is an indispensable tool for rapid analysis of mass-produced graphene and is equally relevant to other 2D materials.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Rapid characterization of wafer-scale 2D material: Epitaxial graphene and graphene nanoribbons on SiC
Authors:
Vishal Panchal,
Yanfei Yang,
Guangjun Cheng,
Jiuning Hu,
Chieh-I Liu,
Albert F. Rigosi,
Christos Melios,
Olga Kazakova,
Angela R. Hight Walker,
David B. Newell,
Randolph E. Elmquist
Abstract:
We demonstrate that the confocal laser scanning microscopy (CLSM) provides a non-destructive, highly-efficient characterization method for large-area epitaxial graphene and graphene nanostructures on SiC substrates, which can be applied in ambient air without sample preparation and is insusceptible to surface charging or surface contamination. Based on the variation of reflected intensity from reg…
▽ More
We demonstrate that the confocal laser scanning microscopy (CLSM) provides a non-destructive, highly-efficient characterization method for large-area epitaxial graphene and graphene nanostructures on SiC substrates, which can be applied in ambient air without sample preparation and is insusceptible to surface charging or surface contamination. Based on the variation of reflected intensity from regions covered by interfacial layer, single layer, bilayer, or few layer graphene, and through the correlation to the results from Raman spectroscopy and SPM, CLSM images with a high resolution (around 150 nm) reveal that the intensity contrast has distinct feature for undergrown graphene (mixing of dense, parallel graphene nanoribbons and interfacial layer), continuous graphene, and overgrown graphene. Moreover, CLSM has a real acquisition time hundreds of times faster per unit area than the supplementary characterization methods. We believe that the confocal laser scanning microscope will be an indispensable tool for mass-produced epitaxial graphene or applicable 2D materials.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
The high-pressure behavior of CaMoO4
Authors:
V. Panchal,
N. Garg,
H. K. Poswal,
D. Errandonea,
P. Rodriguez-Hernandez,
A. Munoz,
E. Cavalli
Abstract:
We report a high-pressure study of tetragonal scheelite-type CaMoO4 up to 29 GPa. In order to characterize its high-pressure behavior, we have combined Raman and optical-absorption measurements with density-functional theory calculations. We have found evidence of a pressure-induced phase transition near 15 GPa. Experiments and calculations agree in assigning the high-pressure phase to a monoclini…
▽ More
We report a high-pressure study of tetragonal scheelite-type CaMoO4 up to 29 GPa. In order to characterize its high-pressure behavior, we have combined Raman and optical-absorption measurements with density-functional theory calculations. We have found evidence of a pressure-induced phase transition near 15 GPa. Experiments and calculations agree in assigning the high-pressure phase to a monoclinic fergusonite-type structure. The reported results are consistent with previous powder x-ray-diffraction experiments, but are in contradiction with the conclusions obtained from earlier Raman measurements, which support the existence of more than one phase transition in the pressure range covered by our studies. The observed scheelite-fergusonite transition induces significant changes in the electronic band gap and phonon spectrum of CaMoO4. We have determined the pressure evolution of the band gap for the low- and high-pressure phases as well as the frequencies and pressure dependences of the Raman-active and infrared-active modes. In addition, based upon calculations of the phonon dispersion of the scheelite phase, carried out at a pressure higher than the transition pressure, we propose a possible mechanism for the reported phase transition. Furthermore, from the calculations we determined the pressure dependence of the unit-cell parameters and atomic positions of the different phases and their room-temperature equations of state. These results are compared with previous experiments showing a very good agreement. Finally, information on bond compressibility is reported and correlated with the macroscopic compressibility of CaMoO4. The reported results are of interest for the many technological applications of this oxide.
△ Less
Submitted 28 September, 2017;
originally announced September 2017.
-
Observation of Coulomb blockade in nanostructured epitaxial bilayer graphene on SiC
Authors:
Cassandra Chua,
Arseniy Lartsev,
**ggao Sui,
Vishal Panchal,
Reuben Puddy,
Carly Richardson,
Charles G. Smith,
T. J. B. M. Janssen,
Alexander Tzalenchuk,
Rositsa Yakimova,
Sergey Kubatkin,
Malcolm R. Connolly
Abstract:
We study electron transport in nanostructures patterned in bilayer graphene patches grown epitaxially on SiC as a function of do**, magnetic field, and temperature. Away from charge neutrality transport is only weakly modulated by changes in carrier concentration induced by a local side-gate. At low n-type do** close to charge neutrality, electron transport resembles that in exfoliated graphen…
▽ More
We study electron transport in nanostructures patterned in bilayer graphene patches grown epitaxially on SiC as a function of do**, magnetic field, and temperature. Away from charge neutrality transport is only weakly modulated by changes in carrier concentration induced by a local side-gate. At low n-type do** close to charge neutrality, electron transport resembles that in exfoliated graphene nanoribbons and is well described by tunnelling of single electrons through a network of Coulomb-blockaded islands. Under the influence of an external magnetic field, Coulomb blockade resonances fluctuate around an average energy and the gap shrinks as a function of magnetic field. At charge neutrality, however, conduction is less insensitive to external magnetic fields. In this regime we also observe a stronger suppression of the conductance below $T^*$, which we interpret as a sign of broken interlayer symmetry or strong fluctuations in the edge/potential disorder.
△ Less
Submitted 31 March, 2017;
originally announced March 2017.
-
Standardization of surface potential measurements of graphene domains
Authors:
Vishal Panchal,
Ruth Pearce,
Rositza Yakimova,
Alexander Tzalenchuk,
Olga Kazakova
Abstract:
We compare the three most commonly used scanning probe techniques to obtain a reliable value of the work function in graphene domains of different thickness. The surface potential (SP) of graphene is directly measured in Hall bar geometry via a combination of electrical functional microscopy and spectroscopy techniques, which enables calibrated work function measurements of graphene domains with v…
▽ More
We compare the three most commonly used scanning probe techniques to obtain a reliable value of the work function in graphene domains of different thickness. The surface potential (SP) of graphene is directly measured in Hall bar geometry via a combination of electrical functional microscopy and spectroscopy techniques, which enables calibrated work function measurements of graphene domains with values ~4.55+/-0.02 eV and ~4.44+/-0.02eV for single- and bi-layer, respectively. We demonstrate that frequency-modulated Kelvin probe force microscopy (FM-KPFM) provides more accurate measurement of the SP than amplitude-modulated (AM)-KPFM. The discrepancy between experimental results obtained by different techniques is discussed. In addition, we use FM-KPFM for contactless measurements of the specific components of the device resistance. We show a strong non-Ohmic behavior of the electrode-graphene contact resistance and extract the graphene channel resistivity.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
The electronic structure of zircon-type orthovanadates: Effects of high-pressure and cation substitution
Authors:
V. Panchal,
D. Errandonea,
A. Segura,
P. Rodriguez-Hernandez,
A. Munoz,
S. Lopez-Moreno,
M. Bettinelli
Abstract:
The electronic structure of four ternary-metal oxides containing isolated vanadate ions is studied. Zircon-type YVO4, YbVO4, LuVO4, and NdVO4 are investigated by high-pressure optical-absorption measurements up to 20 GPa. First-principles calculations based on density-functional theory were also performed to analyze the electronic band structure as a function of pressure. The electronic structure…
▽ More
The electronic structure of four ternary-metal oxides containing isolated vanadate ions is studied. Zircon-type YVO4, YbVO4, LuVO4, and NdVO4 are investigated by high-pressure optical-absorption measurements up to 20 GPa. First-principles calculations based on density-functional theory were also performed to analyze the electronic band structure as a function of pressure. The electronic structure near the Fermi level originates largely from molecular orbitals of the vanadate ion, but cation substitution influence these electronic states. The studied ortovanadates, with the exception of NdVO4, undergo a zircon-scheelite structural phase transition that causes a collapse of the band-gap energy. The pressure coefficient dEg/dP show positive values for the zircon phase and negative values for the scheelite phase. NdVO4 undergoes a zircon-monazite-scheelite structural sequence with two associated band-gap collapses.
△ Less
Submitted 25 January, 2012;
originally announced January 2012.
-
Zircon to monazite phase transition in CeVO4
Authors:
V. Panchal,
S. Lopez-Moreno,
D. Santamaria-Perez,
D. Errandonea,
F. J. Manjon,
P. Rodriguez-Hernandez,
A. Munoz,
S. N. Achary,
A. K. Tyagi
Abstract:
X-ray diffraction and Raman-scattering measurements on cerium vanadate have been performed up to 12 and 16 GPa, respectively. Experiments reveal that at 5.3 GPa the onset of a pressure-induced irreversible phase transition from the zircon to the monazite structure. Beyond this pressure, diffraction peaks and Raman-active modes of the monazite phase are measured. The zircon to monazite transition i…
▽ More
X-ray diffraction and Raman-scattering measurements on cerium vanadate have been performed up to 12 and 16 GPa, respectively. Experiments reveal that at 5.3 GPa the onset of a pressure-induced irreversible phase transition from the zircon to the monazite structure. Beyond this pressure, diffraction peaks and Raman-active modes of the monazite phase are measured. The zircon to monazite transition in CeVO4 is distinctive among the other rare-earth orthovanadates. We also observed softening of external translational Eg and internal B2g bending modes. We attributed it to mechanical instabilities of zircon phase against the pressure-induced distortion. We additionally report lattice-dynamical and total-energy calculations which are in agreement with the experimental results. Finally, the effect of non-hydrostatic stresses on the structural sequence is studied and the equations of state of different phases are reported.
△ Less
Submitted 2 May, 2011;
originally announced May 2011.
-
Biogeography based Satellite Image Classification
Authors:
V. K. Panchal,
Parminder Singh,
Navdeep Kaur,
Harish Kundra
Abstract:
Biogeography is the study of the geographical distribution of biological organisms. The mindset of the engineer is that we can learn from nature. Biogeography Based Optimization is a burgeoning nature inspired technique to find the optimal solution of the problem. Satellite image classification is an important task because it is the only way we can know about the land cover map of inaccessible a…
▽ More
Biogeography is the study of the geographical distribution of biological organisms. The mindset of the engineer is that we can learn from nature. Biogeography Based Optimization is a burgeoning nature inspired technique to find the optimal solution of the problem. Satellite image classification is an important task because it is the only way we can know about the land cover map of inaccessible areas. Though satellite images have been classified in past by using various techniques, the researchers are always finding alternative strategies for satellite image classification so that they may be prepared to select the most appropriate technique for the feature extraction task in hand. This paper is focused on classification of the satellite image of a particular land cover using the theory of Biogeography based Optimization. The original BBO algorithm does not have the inbuilt property of clustering which is required during image classification. Hence modifications have been proposed to the original algorithm and the modified algorithm is used to classify the satellite image of a given region. The results indicate that highly accurate land cover features can be extracted effectively when the proposed algorithm is used.
△ Less
Submitted 5 December, 2009;
originally announced December 2009.
-
Low temperature Raman study of Ca3Co2O6
Authors:
Vinod panchal,
Smita Gohil,
Shankar Ghosh
Abstract:
We present low temperature Raman measurements on Ca3Co2O6. Shell model lattice dynamics calculations were done to determine the vibrational pattern of the expected Raman modes. In the temperature window 300K to 52K the mode frequencies and the full width at half maxima (FWHM) of the modes vary in an expected fashion, i.e., the mode frequencies shift to higher values and the FWHM decreases with l…
▽ More
We present low temperature Raman measurements on Ca3Co2O6. Shell model lattice dynamics calculations were done to determine the vibrational pattern of the expected Raman modes. In the temperature window 300K to 52K the mode frequencies and the full width at half maxima (FWHM) of the modes vary in an expected fashion, i.e., the mode frequencies shift to higher values and the FWHM decreases with lowering of temperature. At about 52K (T *) there happens an abrupt change in both the peak position and FWHM. The peak positions show a sudden softening while FWHM increases abruptly. To explain these spectral features we postulate that below T * the degeneracy of the high symmetry Eg is lifted due to the possible distortion of the CoOO6 octahedra.
△ Less
Submitted 26 February, 2009;
originally announced February 2009.
-
Non-monotonic size dependence of the elastic modulus of nanocrystalline ZnO embedded in a nanocrystalline silver matrix
Authors:
Vinod Panchal,
Shankar Ghosh,
Smita Gohil,
Nilesh kulkarni,
Pushan Ayyub
Abstract:
We present the first high pressure Raman study on nanocrystalline ZnO films with different average crystallite sizes. The problem of low Raman signals from nano sized particles was overcome by forming a nanocomposite of Ag and ZnO nanoparticles. The presence of the nanodispersed Ag particles leads to a substantial surface enhancement of the Raman signal from ZnO. We find that the elastic modulus…
▽ More
We present the first high pressure Raman study on nanocrystalline ZnO films with different average crystallite sizes. The problem of low Raman signals from nano sized particles was overcome by forming a nanocomposite of Ag and ZnO nanoparticles. The presence of the nanodispersed Ag particles leads to a substantial surface enhancement of the Raman signal from ZnO. We find that the elastic modulus of nanocrystalline ZnO shows a non-monotonic dependence on the crystallite size. We suggest that the non-monotonicity arises from an interplay between the elastic properties of the individual grains and the intergranular region.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.
-
Raman and x-ray diffraction investigations on BaMoO4 under high pressures
Authors:
Vinod Panchal,
Nandini Garg,
Surinder M. Sharma
Abstract:
X-ray diffraction and Raman scattering studies on scheelite structured barium molybdate show that, at 5.8 GPa, it undergoes a first order phase transition to fergusonite structure (I2/a, Z=4), asobserved in iso-structural barium tungstate.At still higher pressures, barium molybdate transform to another phase between 7.2-9.5 GPa. On release of pressure from 15.8 GPa, the initial phase is recovere…
▽ More
X-ray diffraction and Raman scattering studies on scheelite structured barium molybdate show that, at 5.8 GPa, it undergoes a first order phase transition to fergusonite structure (I2/a, Z=4), asobserved in iso-structural barium tungstate.At still higher pressures, barium molybdate transform to another phase between 7.2-9.5 GPa. On release of pressure from 15.8 GPa, the initial phase is recovered implying that the observed structural modifications are reversible.
△ Less
Submitted 3 January, 2006; v1 submitted 18 May, 2005;
originally announced May 2005.
-
High Pressure phase transitions in BaWO4
Authors:
Vinod Panchal,
Nandini Garg,
A. K. Chauhan,
Sangeeta,
Surinder M. Sharma
Abstract:
Using in-situ angle dispersive x-ray diffraction, we have shown that barium tungstate, which exists in scheelite phase at ambient conditions, transforms to a new phase about seven giga pascal. Analysis of our data based on Le bail refinement suggests that this phase could be fergusonite and not mercuric molybdate type, which was proposed earlier from the Raman investigations. Beyond fourteen gig…
▽ More
Using in-situ angle dispersive x-ray diffraction, we have shown that barium tungstate, which exists in scheelite phase at ambient conditions, transforms to a new phase about seven giga pascal. Analysis of our data based on Le bail refinement suggests that this phase could be fergusonite and not mercuric molybdate type, which was proposed earlier from the Raman investigations. Beyond fourteen giga pascal this compound undergoes another phase transformation to a significantly disordered structure. Both the phase transitions are found to be reversible.
△ Less
Submitted 12 May, 2005; v1 submitted 10 October, 2003;
originally announced October 2003.