-
Fano-enhanced low-loss on-chip superconducting microwave circulator
Authors:
N. Pradeep Kumar,
Dat Thanh Le,
Prasanna Pakkiam,
Thomas M. Stace,
Arkady Fedorov
Abstract:
Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within $1\%$ of design values. This toleranc…
▽ More
Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within $1\%$ of design values. This tolerance is tighter than standard junction fabrication methods provide, so we propose and demonstrate a design improvement that relaxes the required junction fabrication precision, allowing for higher device performance and fabrication yield. Specifically, we introduce large direct capacitive couplings between the waveguides to create strong Fano scattering interference. We measure enhanced `circulation fidelity' above $97\%$, with optimised on-resonance insertion loss of $0.2$~dB, isolation of $18$~dB, and power reflectance of $-15$~dB, in good agreement with model calculations.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Passive microwave circulation on a superconducting chip
Authors:
Arkady Fedorov,
N. Pradeep Kumar,
Dat Thanh Le,
Rohit Navarathna,
Prasanna Pakkiam,
Thomas M. Stace
Abstract:
Building large-scale superconducting quantum circuits will require miniaturisation and integration of supporting devices including microwave circulators, which are currently bulky, stand-alone components. Here we report the realisation of a passive on-chip circulator which is made from a loop consisting of three tunnel-coupled superconducting islands, with DC-only control fields. We observe the ef…
▽ More
Building large-scale superconducting quantum circuits will require miniaturisation and integration of supporting devices including microwave circulators, which are currently bulky, stand-alone components. Here we report the realisation of a passive on-chip circulator which is made from a loop consisting of three tunnel-coupled superconducting islands, with DC-only control fields. We observe the effect of quasiparticle tunnelling, and we dynamically classify the system into different quasiparticle sectors. When tuned for circulation, the device exhibits strongly non-reciprocal 3-port scattering, with average on-resonance insertion loss of 2 dB, isolation of 14 dB, power reflectance of -11 dB, and a bandwidth of 200 MHz.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Multi-time quantum process tomography on a superconducting qubit
Authors:
Christina Giarmatzi,
Tyler Jones,
Alexei Gilchrist,
Prasanna Pakkiam,
Arkady Fedorov,
Fabio Costa
Abstract:
Current quantum technologies are at the cusp of becoming useful, but still face formidable obstacles such as noise. Noise severely limits the ability to scale quantum devices to the point that they would offer an advantage over classical devices. To understand the sources of noise it is necessary to fully characterise the quantum processes occurring across many time steps; only this would reveal a…
▽ More
Current quantum technologies are at the cusp of becoming useful, but still face formidable obstacles such as noise. Noise severely limits the ability to scale quantum devices to the point that they would offer an advantage over classical devices. To understand the sources of noise it is necessary to fully characterise the quantum processes occurring across many time steps; only this would reveal any time-correlated noise called non-Markovian. Previous efforts have attempted such a characterisation but obtained only a limited reconstruction of such multi-time processes. In this work, we fully characterise a multi-time quantum process on superconducting hardware using in-house and cloud-based quantum processors. We achieve this by employing sequential measure-and-prepare operations combined with post-processing. Employing a recently developed formalism for multi-time processes, we detect general multi-time correlated noise. We also detect quantum correlated noise which demonstrates that part of the noise originates from quantum sources, such as physically nearby qubits on the chip. Our findings and techniques are expected to advance error-mitigation techniques in current quantum hardware, a necessary component to scale up the technology and achieve its true potential.
△ Less
Submitted 14 June, 2024; v1 submitted 1 August, 2023;
originally announced August 2023.
-
Qubit-controlled directional edge states in waveguide QED
Authors:
Prasanna Pakkiam,
N. Pradeep Kumar,
Mikhail Pletyukhov,
Arkady Fedorov
Abstract:
We propose an in-situ tunable chiral quantum system, composed of a quantum emitter coupled to a waveguide based on the Rice-Mele model (where we alternate both the on-site potentials and tunnel couplings between sites in the waveguide array). Specifically, we show that the chirality of photonic bound state, that emerges in the bandgap of the waveguide, depends only on the energy of the qubit; a pa…
▽ More
We propose an in-situ tunable chiral quantum system, composed of a quantum emitter coupled to a waveguide based on the Rice-Mele model (where we alternate both the on-site potentials and tunnel couplings between sites in the waveguide array). Specifically, we show that the chirality of photonic bound state, that emerges in the bandgap of the waveguide, depends only on the energy of the qubit; a parameter that is easy to tune in many artificial atoms. In contrast to previous proposals that have either shown imperfect chirality or fixed directionality, our waveguide QED scheme achieves both perfect chirality and the capability to switch the directionality on demand with just one tunable element in the device. We also show that our model is easy to implement in both state-of-the-art superconducting circuit and quantum dot architectures. The results show technological promise in creating long-range couplers between qubits while maintaining, in principle, zero crosstalk.
△ Less
Submitted 4 April, 2023; v1 submitted 30 November, 2022;
originally announced December 2022.
-
Double Upconversion for Superconducting Qubit Control realised using Microstrip Filters
Authors:
Jonathan Dearlove,
Prasanna Pakkiam,
Arkady Fedorov
Abstract:
Superconducting qubits provide a promising platform for physically realising quantum computers at scale. Such devices require precision control at microwave frequencies. Common practice is to synthesise such control signals using IQ modulation, requiring calibration of a in-phase (I) and quadrature (Q) signals alongside two DC offsets to generate pure tones. This paper presents an economic physica…
▽ More
Superconducting qubits provide a promising platform for physically realising quantum computers at scale. Such devices require precision control at microwave frequencies. Common practice is to synthesise such control signals using IQ modulation, requiring calibration of a in-phase (I) and quadrature (Q) signals alongside two DC offsets to generate pure tones. This paper presents an economic physical implementation of an alternative method referred to as double upconversion which requires considerably less hardware calibration and physical resources to operate a qubit. A physical circuit was created using standard PCB design techniques for microstrip filters and two common RF mixers. This circuit was then utilised to successfully control a superconducting transmon qubit. When using proper RF shielding, qubit tones were demonstrated with over 70dB of spurious-free dynamic range across the entire operational spectrum of a transmon qubit.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Effect of Measurement Backaction on Quantum Clock Precision Studied with a Superconducting Circuit
Authors:
Xin He,
Prasanna Pakkiam,
Adil A. Gangat,
Michael J. Kewming,
Gerard J. Milburn,
Arkady Fedorov
Abstract:
We theoretically and experimentally study the precision of a quantum clock near zero temperature, explicitly accounting for the effect of continuous measurement. The clock is created by a superconducting transmon qubit dispersively coupled to an open coplanar resonator. The cavity and qubit are driven by coherent fields, and the cavity output is monitored with a quantum-noise-limited amplifier. Wh…
▽ More
We theoretically and experimentally study the precision of a quantum clock near zero temperature, explicitly accounting for the effect of continuous measurement. The clock is created by a superconducting transmon qubit dispersively coupled to an open coplanar resonator. The cavity and qubit are driven by coherent fields, and the cavity output is monitored with a quantum-noise-limited amplifier. When the continuous measurement is weak, it induces persistent coherent oscillations (with fluctuating periods) in the conditional moments of the qubit's energy probability distribution, which are manifest in the output of the resonator. On the other hand, strong continuous measurement leads to an incoherent cycle of quantum jumps. We theoretically find an equality for the precision of the clock in each regime. Independently from the equalities, we derive a kinetic uncertainty relation for the precision, and find that both equalities satisfy this uncertainty relation. Finally, we experimentally verify that our quantum clock obeys the kinetic uncertainty relation for the precision, thus making an explicit link between the (kinetic) thermodynamic behavior of the clock and its precision, and achieving an experimental test of a kinetic uncertainty relation in the quantum domain.
△ Less
Submitted 21 September, 2023; v1 submitted 22 July, 2022;
originally announced July 2022.
-
Single-shot readout of multiple donor electron spins with a gate-based sensor
Authors:
Mark R. Hogg,
Prasanna Pakkiam,
Samuel K. Gorman,
Andrey V. Timofeev,
Yousun Chung,
Gurpreet K. Gulati,
Matthew G. House,
Michelle Y. Simmons
Abstract:
Proposals for large-scale semiconductor spin-based quantum computers require high-fidelity single-shot qubit readout to perform error correction and read out qubit registers at the end of a computation. However, as devices scale to larger qubit numbers integrating readout sensors into densely packed qubit chips is a critical challenge. Two promising approaches are minimising the footprint of the s…
▽ More
Proposals for large-scale semiconductor spin-based quantum computers require high-fidelity single-shot qubit readout to perform error correction and read out qubit registers at the end of a computation. However, as devices scale to larger qubit numbers integrating readout sensors into densely packed qubit chips is a critical challenge. Two promising approaches are minimising the footprint of the sensors, and extending the range of each sensor to read more qubits. Here we show high-fidelity single-shot electron spin readout using a nanoscale single-lead quantum dot (SLQD) sensor that is both compact and capable of reading multiple qubits. Our gate-based SLQD sensor is deployed in an all-epitaxial silicon donor spin qubit device, and we demonstrate single-shot readout of three $^{31}$P donor quantum dot electron spins with a maximum fidelity of 95%. Importantly in our device the quantum dot confinement potentials are provided inherently by the donors, removing the need for additional metallic confinement gates and resulting in strong capacitive interactions between sensor and donor quantum dots. We observe a $1/d^{1.4}$ scaling of the capacitive coupling between sensor and $^{31}$P dots (where $d$ is the sensor-dot distance), compared to $1/d^{2.5-3.0}$ in gate-defined quantum dot devices. Due to the small qubit size and strong capacitive interactions in all-epitaxial donor devices, we estimate a single sensor can achieve single-shot readout of approximately 15 qubits in a linear array, compared to 3-4 qubits for a similar sensor in a gate-defined quantum dot device. Our results highlight the potential for spin qubit devices with significantly reduced sensor densities.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Neural networks for on-the-fly single-shot state classification
Authors:
Rohit Navarathna,
Tyler Jones,
Tina Moghaddam,
Anatoly Kulikov,
Rohit Beriwal,
Markus Jerger,
Prasanna Pakkiam,
Arkady Fedorov
Abstract:
Neural networks have proven to be efficient for a number of practical applications ranging from image recognition to identifying phase transitions in quantum physics models. In this paper we investigate the application of neural networks to state classification in a single-shot quantum measurement. We use dispersive readout of a superconducting transmon circuit to demonstrate an increase in assign…
▽ More
Neural networks have proven to be efficient for a number of practical applications ranging from image recognition to identifying phase transitions in quantum physics models. In this paper we investigate the application of neural networks to state classification in a single-shot quantum measurement. We use dispersive readout of a superconducting transmon circuit to demonstrate an increase in assignment fidelity for both two and three state classification. More importantly, our method is ready for on-the-fly data processing without overhead or need for large data transfer to a hard drive. In addition we demonstrate the capacity of neural networks to be trained against experimental imperfections, such as phase drift of a local oscillator in a heterodyne detection scheme.
△ Less
Submitted 17 November, 2021; v1 submitted 13 July, 2021;
originally announced July 2021.
-
Single-shot single-gate RF spin readout in silicon
Authors:
P. Pakkiam,
A. V. Timofeev,
M. G. House,
M. R. Hogg,
T. Kobayashi,
M. Koch,
S. Rogge,
M. Y. Simmons
Abstract:
For solid-state spin qubits, single-gate RF readout can help minimise the number of gates required for scale-up to many qubits since the readout sensor can integrate into the existing gates required to manipulate the qubits (Veldhorst 2017, Pakkiam 2018). However, a key requirement for a scalable quantum computer is that we must be capable of resolving the qubit state within single-shot, that is,…
▽ More
For solid-state spin qubits, single-gate RF readout can help minimise the number of gates required for scale-up to many qubits since the readout sensor can integrate into the existing gates required to manipulate the qubits (Veldhorst 2017, Pakkiam 2018). However, a key requirement for a scalable quantum computer is that we must be capable of resolving the qubit state within single-shot, that is, a single measurement (DiVincenzo 2000). Here we demonstrate single-gate, single-shot readout of a singlet-triplet spin state in silicon, with an average readout fidelity of $82.9\%$ at a $3.3~\text{kHz}$ measurement bandwidth. We use this technique to measure a triplet $T_-$ to singlet $S_0$ relaxation time of $0.62~\text{ms}$ in precision donor quantum dots in silicon. We also show that the use of RF readout does not impact the maximum readout time at zero detuning limited by the $S_0$ to $T_-$ decay, which remained at approximately $2~\text{ms}$. This establishes single-gate sensing as a viable readout method for spin qubits.
△ Less
Submitted 5 September, 2018;
originally announced September 2018.
-
Magic-wavelength Faraday probe measures spin continuously and without light shifts
Authors:
M. Jasperse,
M. J. Kewming,
S. N. Fischer,
P. Pakkiam,
R. P. Anderson,
L. D. Turner
Abstract:
We describe a dispersive Faraday optical probe of atomic spin which performs a weak measurement of spin projection of a quantum gas continuously for more than one second. To date focusing bright far-off-resonance probes onto quantum gases has proved invasive, due to strong scalar and vector light shifts exerting dipole and Stern-Gerlach forces. We show that tuning the probe near the magic-zero wav…
▽ More
We describe a dispersive Faraday optical probe of atomic spin which performs a weak measurement of spin projection of a quantum gas continuously for more than one second. To date focusing bright far-off-resonance probes onto quantum gases has proved invasive, due to strong scalar and vector light shifts exerting dipole and Stern-Gerlach forces. We show that tuning the probe near the magic-zero wavelength at 790 nm between the fine-structure doublet of $^{87}$Rb cancels the scalar light shift, and careful control of polarization eliminates the vector light shift. Faraday rotations due to each fine-structure line reinforce at this wavelength, enhancing the signal-to-noise ratio for a fixed rate of probe-induced decoherence. Using this minimally-invasive spin probe we perform microscale atomic magnetometry at high temporal resolution. Spectrogram analysis of the Larmor precession signal of a single spinor Bose-Einstein condensate measures a time-varying magnetic field strength with 1 μG accuracy every 5 ms; or equivalently makes > 200 successive measurements each at $10\,\mathrm{pT/\sqrt{Hz}}$ sensitivity.
△ Less
Submitted 31 May, 2017;
originally announced May 2017.
