Showing 1–50 of 197 results for author: Pajot, F

Life Cycle Assessment of the Athena X-ray Integral Field Unit

Authors: Didier Barret, Vincent Albouys, Jürgen Knödlseder, Xavier Loizillon, Matteo D'Andrea, Florence Ardellier, Simon Bandler, Pieter Dieleman, Lionel Duband, Luc Dubbeldam, Claudio Macculi, Eduardo Medinaceli, Francois Pajot, Damien Prêle, Laurent Ravera, Tanguy Thibert, Isabel Vera Trallero, Natalie Webb

Abstract: The X-ray Integral Field Unit (X-IFU) is the high-resolution X-ray spectrometer to fly on board the Athena Space Observatory of the European Space Agency (ESA). It is being developed by an international Consortium led by France, involving twelve ESA member states, plus the United States. It is a cryogenic instrument, involving state of the art technology, such as micro-calorimeters, to be read out… ▽ More The X-ray Integral Field Unit (X-IFU) is the high-resolution X-ray spectrometer to fly on board the Athena Space Observatory of the European Space Agency (ESA). It is being developed by an international Consortium led by France, involving twelve ESA member states, plus the United States. It is a cryogenic instrument, involving state of the art technology, such as micro-calorimeters, to be read out by low noise electronics. As the instrument was undergoing its system requirement review (in 2022), a life cycle assessment (LCA) was performed to estimate the environmental impacts associated with the development of the sub-systems that were under the responsibility of the X-IFU Consortium. The assessment included the supply, manufacturing and testing of sub systems, as well as involved logistics and manpower. We find that the most significant environmental impacts arise from testing activities, which is related to energy consumption in clean rooms, office work, which is related to energy consumption in office buildings, and instrument manufacturing, which is related to the use of mineral and metal resources. Furthermore, business travels is another area of concern, despite the policy to reduced flying adopted by the Consortium. As the instrument is now being redesigned to fit within the new boundaries set by ESA, the LCA will be updated, with a focus on the hot spots identified in the first iteration. The new configuration, consolidated in 2023, is significantly different from the previously studied version and is marked by an increase of the perimeter of responsibility for the Consortium. This will need to be folded in the updated LCA, kee** the ambition to reduce the environmental footprint of X-IFU, while complying with its stringent requirements in terms of performance and risk management. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: 28 pages, 7 figures, accepted for publication in Experimental Astronomy

Toward map** turbulence in the intracluster medium III. Constraints on the turbulent power spectrum with Athena/X-IFU

Authors: Sophie Beaumont, Alexeï Molin, Nicolas Clerc, Étienne Pointecouteau, Mélina Vanel, Edoardo Cucchetti, Philippe Peille, François Pajot

Abstract: Context. Future X-ray observatories with high spectral resolution and imaging capabilities will enable measurements and map**s of emission line shifts in the intracluster medium (ICM). Such direct measurements can serve as unique probes of turbulent motions in the ICM. Determining the level and scales of turbulence will improve our understanding of the galaxy cluster dynamical evolution and asse… ▽ More Context. Future X-ray observatories with high spectral resolution and imaging capabilities will enable measurements and map**s of emission line shifts in the intracluster medium (ICM). Such direct measurements can serve as unique probes of turbulent motions in the ICM. Determining the level and scales of turbulence will improve our understanding of the galaxy cluster dynamical evolution and assembly, together with a more precise evaluation of the non thermal support pressure budget. This will allow for more accurate constraints to be placed on the masses of galaxy clusters, among other potential benfits. Aims. In this view, we implemented the methods presented in the previous instalments of our work to characterize the turbulence in the ICM in a feasibility study with the X-IFU on board the future European X-ray observatory, Athena. Methods. From idealized mock observations of a toy model cluster, we reconstructed the second-order structure function built with the observed velocity field to constrain the turbulence. We carefully accounted for the various sources of errors to derive the most realistic and comprehensive error budget within the limits of our approach. With prior assumptions on the dissipation scale and power spectrum slope, we constrained the parameters of the turbulent power spectrum model through the use of MCMC sampling. Results. With favourable assumptions, we were able to retrieve the injection scale, velocity dispersion, and power spectrum slope, with 1sigma uncertainties better than ~15% of the input values. We demonstrated the efficiency of our carefully set framework to constrain the turbulence in the ICM from high-resolution X-ray spectroscopic observations, paving the way for more in-depth investigation of the optimal required observing strategy within a more restrictive observational setup with the future X-IFU instrument. △ Less

Submitted 18 March, 2024; v1 submitted 13 March, 2024; originally announced March 2024.

Comments: Accepted for publication in Astronomy and Astrophysics

Measuring the CMB primordial B-modes with Bolometric Interferometry

Authors: A. Mennella, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, F. Cacciotti, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, L. Colombo, F. Columbro, A. Coppolecchia , et al. (89 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

A case study of early galaxy cluster with the Athena X-IFU

Authors: F. Castellani, N. Clerc, E. Pointecouteau, Y. M. Bahé, J. Schaye, F. Pajot

Abstract: Context: Observations of the hot gas in distant clusters of galaxies, though challenging, are key to understand the role of intense galaxy activity, super-massive black hole feedback and chemical enrichment in the process of massive halos assembly. Aims: We assess the feasibility to retrieve, using X-ray hyperspectral data only, the thermodymamical hot gas properties and chemical abundances of a… ▽ More Context: Observations of the hot gas in distant clusters of galaxies, though challenging, are key to understand the role of intense galaxy activity, super-massive black hole feedback and chemical enrichment in the process of massive halos assembly. Aims: We assess the feasibility to retrieve, using X-ray hyperspectral data only, the thermodymamical hot gas properties and chemical abundances of a $z=2$ galaxy cluster of mass M500=7 x $10^{13} M_{\odot}$, extracted from the Hydrangea hydrodynamical simulation. Methods: We create mock X-ray observations of the future X-ray Integral Field Unit (X-IFU) onboard the Athena mission. By forward-modeling the measured 0.4-1 keV surface brightness, the projected gas temperature and abundance profiles, we reconstruct the three-dimensional distribution for the gas density, pressure, temperature and entropy. Results: Thanks to its large field-of-view, high throughput and exquisite spectral resolution, one X-IFU exposure lasting 100ks enables reconstructing density and pressure profiles with 20% precision out to a characteristic radius of R500, accounting for each quantity's intrinsic dispersion in the Hydrangea simulations. Reconstruction of abundance profiles requires both higher signal-to-noise ratios and specific binning schemes. We assess the enhancement brought by longer exposures and by observing the same object at later evolutionary stages ($z=1-1.5$). Conclusions: Our analysis highlights the importance of scatter in the radially binned gas properties, which induces significant effects on the observed projected quantities. The fidelity of the reconstruction of gas profiles is sensitive to the degree of gas components mixing along the line-of-sight. Future analyses should aim at involving dedicated hyper-spectral models and fitting methods that are able to grasp the complexity of such three-dimensional, multi-phase, diffuse gas structures. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 15 pages, 11 figures, 3 tables. Accepted for publication in A&A

Observing gravitational redshift with X-Ray emission in galaxy clusters with Athena X-IFU

Authors: Alexeï Molin, Nicolas Clerc, Étienne Pointecouteau, François Pajot, Edoardo Cuchetti

Abstract: Context. The Doppler shift predicted by general relativity for light esca** a gravitational potential has been observed on Earth as well as in the direction of various stars and galaxy clusters at optical wavelengths. Aims. Observing the gravitational redshift in the X-ray band within galaxy clusters could provide information on their properties and, in particular, their gravitational potential.… ▽ More Context. The Doppler shift predicted by general relativity for light esca** a gravitational potential has been observed on Earth as well as in the direction of various stars and galaxy clusters at optical wavelengths. Aims. Observing the gravitational redshift in the X-ray band within galaxy clusters could provide information on their properties and, in particular, their gravitational potential. We present a feasibility study of such a measurement, using the capabilities of the next-generation European X-ray observatory Athena. Methods. We used a simple generalized Navarro-Frenk-White potential model along with a beta-model for the density of baryonic matter, which sets the emission to provide an estimation of the observed redshift in the simplest of cases. We generated mock observations with the Athena X-ray Integral Field Unit (X-IFU) for a nearby massive cluster, while seeking to recover the gravitational redshift along with other properties of the toy model cluster. Results. We investigated the observability of the gravitational redshift in an idealized test case of a nearby massive cluster with the Athena X-IFU instrument, as well as its use in probing the properties of the potential well. We were also able to constrain the mass to a 20 % level of precision and the cosmological redshift to less than 1%, within a simplified and idealized observational framework. More refined simulations accounting for further effects such as the internal gas motions and the actual shape of the potential well are required to fully investigate the feasibility of measuring the gravitational redshift for a single target or statistically over a sample of galaxy clusters. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 11 pages, 10 figures

Journal ref: A&A 679, A24 (2023)

Status of QUBIC, the Q&U Bolometer for Cosmology

Authors: L. Mousset, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, S. Colombo, F. Columbro, A. Coppolecchia, B. Costanza , et al. (86 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: Contribution to the 2022 Cosmology session of the 33rd Rencontres de Blois. arXiv admin note: substantial text overlap with arXiv:2203.08947

A 50 mK test bench for demonstration of the readout chain of Athena/X-IFU

Authors: Florent Castellani, Sophie Beaumont, François Pajot, Gilles Roudil, Joseph Adams, Simon Bandler, James Chervenak, Christophe Daniel, Edward V Denison, W Bertrand Doriese, Michel Dupieux, Malcolm Durkin, Hervé Geoffray, Gene C Hilton, David Murat, Yann Parot, Philippe Peille, Damien Prêle, Laurent Ravera, Carl D Reintsema, Kazuhiro Sakai, Robert W Stevens, Joel N Ullom, Leila R Vale, Nicholas Wakeham

Abstract: The X-IFU (X-ray Integral Field Unit) onboard the large ESA mission Athena (Advanced Telescope for High ENergy Astrophysics), planned to be launched in the mid 2030s, will be a cryogenic X-ray imaging spectrometer operating at 55 mK. It will provide unprecedented spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) in the 0.2-12 keV energy range thanks to its array of TES (Tra… ▽ More The X-IFU (X-ray Integral Field Unit) onboard the large ESA mission Athena (Advanced Telescope for High ENergy Astrophysics), planned to be launched in the mid 2030s, will be a cryogenic X-ray imaging spectrometer operating at 55 mK. It will provide unprecedented spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) in the 0.2-12 keV energy range thanks to its array of TES (Transition Edge Sensors) microcalorimeters of more than 2k pixel. The detection chain of the instrument is developed by an international collaboration: the detector array by NASA/GSFC, the cold electronics by NIST, the cold amplifier by VTT, the WFEE (Warm Front-End Electronics) by APC, the DRE (Digital Readout Electronics) by IRAP and a focal plane assembly by SRON. To assess the operation of the complete readout chain of the X-IFU, a 50 mK test bench based on a kilo-pixel array of microcalorimeters from NASA/GSFC has been developed at IRAP in collaboration with CNES. Validation of the test bench has been performed with an intermediate detection chain entirely from NIST and Goddard. Next planned activities include the integration of DRE and WFEE prototypes in order to perform an end-to-end demonstration of a complete X-IFU detection chain. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: Proceedings-of-the-SPIE-The-International-Society-for-Optical-Engineering SPIE-Int. Soc. Opt. Eng, In press

X-IFU/Athena view of the most distant galaxy clusters in the Universe

Authors: Florent Castellani, N. Clerc, Etienne Pointecouteau, Yannick Bahé, F. Pajot

Abstract: The X-ray Integral Field Unit (X-IFU) on-board the second large ESA mission ''Athena'' will be a high spatial (5'') and spectral (2.5eV) resolution X-ray imaging spectrometer, operating in the 0.2-12 keV energy band. It will address the science question of the assembly and evolution through cosmic time of the largest halos of matter in the Universe, groups and clusters of galaxies. To this end, we… ▽ More The X-ray Integral Field Unit (X-IFU) on-board the second large ESA mission ''Athena'' will be a high spatial (5'') and spectral (2.5eV) resolution X-ray imaging spectrometer, operating in the 0.2-12 keV energy band. It will address the science question of the assembly and evolution through cosmic time of the largest halos of matter in the Universe, groups and clusters of galaxies. To this end, we present an on-going feasibility study to demonstrate the X-IFU capabilities to unveil the physics of massive halos at their epoch of formation. Starting from a distant (z=2) group of galaxies ($M_{500} = 7\cdot 10^{13} M_\odot/h$) extracted from the HYDRANGEA cosmological and hydrodynamical numerical simulations, we perform an end-to-end simulation of X-IFU observations. From the reconstruction of the global, 1D and 2D quantities, we plan to investigate the various X-IFU science cases for clusters of galaxies, such as the chemical enrichment of the intra-cluster medium (ICM), the dynamical assembly of groups and clusters and the impact of feedback from galaxy and super-massive black hole evolution. △ Less

Submitted 6 September, 2022; originally announced September 2022.

Comments: Journées 2021 de la Société Française d'Astronomie \& d'Astrophysique, Jun 2021, CarbonFreeConf, France

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

Authors: Didier Barret, Vincent Albouys, Jan-Willem den Herder, Luigi Piro, Massimo Cappi, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Stéphane Paltani, Gregor Rauw, Agata Rozanska, Jiri Svoboda, Joern Wilms, Noriko Yamasaki, Marc Audard, Simon Bandler, Marco Barbera, Xavier Barcons, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Elisa Costantini, Thomas Dauser, Anne Decourchelle, Lionel Duband , et al. (274 additional authors not shown)

Abstract: The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide sp… ▽ More The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged). △ Less

Submitted 28 November, 2022; v1 submitted 30 August, 2022; originally announced August 2022.

Comments: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editing

Performance of the polarization leakage correction in the PILOT data

Authors: J-Ph. Bernard, A. Bernard, H. Roussel, I. Choubani, D. Alina, J. Aumont, A. Hughes, I. Ristorcelli, S. Stever, T. Matsumura S. Sugiyama, K. Komatsu, G. de Gasperis, K. Ferriere, V. Guillet, N. Ysard, P. Ade, P. de Bernardis, N. Bray, B. Crane, J. P. Dubois, M. Griffin, P. Hargrave, Y. Longval, S. Louvel, B. Maffei , et al. (11 additional authors not shown)

Abstract: The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during… ▽ More The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during the second flight was described in Mangilli et al. 2019. In this paper, we present data processing steps that were not presented in Mangilli et al. 2019 and that we have recently implemented to correct for several remaining instrumental effects. The additional data processing concerns corrections related to detector cross-talk and readout circuit memory effects, and leakage from total intensity to polarization. We illustrate the above effects and the performance of our corrections using data obtained during the third flight of PILOT, but the methods used to assess the impact of these effects on the final science-ready data, and our strategies for correcting them will be applied to all PILOT data. We show that the above corrections, and in particular that for the intensity to polarization leakage, which is most critical for accurate polarization measurements with PILOT, are accurate to better than 0.4 % as measured on Jupiter during flight#3. △ Less

Submitted 7 May, 2022; originally announced May 2022.

A test platform for the detection and readout chain for the Athena X-IFU

Authors: Gabriele Betancourt-Martinez, François Pajot, Sophie Beaumont, Gilles Roudil, Joseph Adams, Hiroki Akamatsu, Simon Bandler, Bernard Bertrand, Marcel Bruijn, Florent Castellani, Edoardo Cucchetti, William Doriese, Michel Dupieux, Hervé Geoffray, Luciano Gottardi, Brian Jackson, Jan van der Kuur, Mikko Kiviranta, Antoine Miniussi, Phillipe Peille, Kevin Ravensberg, Laurent Ravera, Carl Reintsema, Kazuhiro Sakai, Stephen Smith , et al. (4 additional authors not shown)

Abstract: We present a test platform for the Athena X-IFU detection chain, which will serve as the first demonstration of the representative end-to-end detection and readout chain for the X-IFU, using prototypes of the future flight electronics and currently available subsystems. This test bench, housed in a commercial two-stage ADR cryostat, includes a focal plane array placed at the 50 mK cold stage of th… ▽ More We present a test platform for the Athena X-IFU detection chain, which will serve as the first demonstration of the representative end-to-end detection and readout chain for the X-IFU, using prototypes of the future flight electronics and currently available subsystems. This test bench, housed in a commercial two-stage ADR cryostat, includes a focal plane array placed at the 50 mK cold stage of the ADR with a kilopixel array of transition-edge sensor microcalorimeter spectrometers and associated cold readout electronics. Prototype room temperature electronics for the X-IFU provide the readout, and will evolve over time to become more representative of the X-IFU mission baseline. The test bench yields critical feedback on subsystem designs and interfaces, in particular the warm readout electronics, and will provide an in-house detection system for continued testing and development of the warm readout electronics and for the validation of X-ray calibration sources. In this paper, we describe the test bench subsystems and design, characterization of the cryostat, and current status of the project. △ Less

Submitted 7 July, 2021; originally announced July 2021.

Comments: 11 pages, 4 figures, to appear in Proc. SPIE Astronomical Telescopes and Instrumentation, 2020

QUBIC IV: Performance of TES Bolometers and Readout Electronics

Authors: M. Piat, G. Stankowiak, E. S. Battistelli, P. de Bernardis, G. D Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, T. D. Hoang, S. Marnieros, S. Masi, A. Mennella, L. Mousset, C. O Sullivan, D. Prele, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi , et al. (104 additional authors not shown)

Abstract: A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are… ▽ More A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry. △ Less

Submitted 20 October, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: Accepted for publication in JCAP

QUBIC I: Overview and ScienceProgram

Authors: J. -Ch. Hamilton, L. Mousset, E. S. Battistelli, M. -A. Bigot-Sazy, P. Chanial, R. Charlassier, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, L. Grandsire, S. Lau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Riccardi, C. Scóccola, M. Stolpovskiy, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (105 additional authors not shown)

Abstract: The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo… ▽ More The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$. △ Less

Submitted 26 August, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Authors: L. Mousset, M. M. Gamboa Lerena, E. S. Battistelli, P. de Bernardis, P. Chanial, G. D'Alessandro, G. Dashyan, M. De Petris, L. Grandsire, J. -Ch. Hamilton, F. Incardona, S. Landau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Ricciardi, C. G. Scóccola, M. Stolpovskiy, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (106 additional authors not shown)

Abstract: Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg… ▽ More Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust map** and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC. △ Less

Submitted 28 March, 2022; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

QUBIC VII: The feedhorn-switch system of the technological demonstrator

Authors: F. Cavaliere, A. Mennella, M. Zannoni, P. Battaglia, E. S. Battistelli, D. Burke, G. D'Alessandro, P. de Bernardis, M. De Petris, C. Franceschet, L. Grandsire, J. -Ch. Hamilton, B. Maffei, E. Manzan, S. Marnieros, S. Masi, C. O'Sullivan, A. Passerini, F. Pezzotta, M. Piat, A. Tartari, S. A. Torchinsky, D. Viganò, F. Voisin, P. Ade , et al. (106 additional authors not shown)

Abstract: We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration… ▽ More We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies. △ Less

Submitted 1 April, 2022; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: 30 pages, 28 figures. Accepted for submission to JCAP

QUBIC VI: cryogenic half wave plate rotator, design and performances

Authors: G. D'Alessandro, L. Mele, F. Columbro, G. Amico, E. S. Battistelli, P. de Bernardis, A. Coppolecchia, M. De Petris, L. Grandsire, J. -Ch. Hamilton, L. Lamagna, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, G. Pisano, G. Presta, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (104 additional authors not shown)

Abstract: Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t… ▽ More Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K). △ Less

Submitted 19 November, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCAP

QUBIC V: Cryogenic system design and performance

Authors: S. Masi, E. S. Battistelli, P. de Bernardis, C. Chapron, F. Columbro, G. D'Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, L. Mele, A. May, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, L. Piccirillo, G. Presta, A. Schillaci, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (104 additional authors not shown)

Abstract: Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe… ▽ More Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes. △ Less

Submitted 25 August, 2021; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: This is one of a series of papers on the QUBIC experiment status - This version of the paper matches the one accepted for publication on Journal of Cosmology and Astroparticle Physics

QUBIC VIII: Optical design and performance

Authors: C. O'Sullivan, M. De Petris, G. Amico, E. S. Battistelli, D. Burke, D. Buzi, C. Chapron, L. Conversi, G. D'Alessandro, P. de Bernardis, M. De Leo, D. Gayer, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, S. Masi, A. Mattei, A. Mennella, L. Mousset, J. D. Murphy, A. Pelosi, M. Perciballi, M. Piat, S. Scully, A. Tartari , et al. (104 additional authors not shown)

Abstract: The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p… ▽ More The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper. △ Less

Submitted 25 August, 2021; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be published in a special issue of JCAP. Accepted for publication

QUBIC III: Laboratory Characterization

Authors: S. A. Torchinsky, J. -Ch. Hamilton, M. Piat, E. S. Battistelli, C. Chapron, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, M. González, L. Grandsire, S. Masi, S. Marnieros, A. Mennella, L. Mousset, J. D. Murphy, D. Prêle, G. Stankowiak, C. O'Sullivan, A. Tartari, J. -P. Thermeau, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro , et al. (103 additional authors not shown)

Abstract: A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,… ▽ More A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations. △ Less

Submitted 15 March, 2022; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC accepted by JCAP for a special issue: https://iopscience.iop.org/journal/1475-7516/page/QUBIC_status_and_forecast

Constraining the origin and models of chemical enrichment in galaxy clusters using the Athena X-IFU

Authors: F. Mernier, E. Cucchetti, L. Tornatore, V. Biffi, E. Pointecouteau, N. Clerc, P. Peille, E. Rasia, D. Barret, S. Borgani, E. Bulbul, T. Dauser, K. Dolag, S. Ettori, M. Gaspari, F. Pajot, M. Roncarelli, J. Wilms, C. Noûs

Abstract: The chemical enrichment of the Universe at all scales is related to stellar winds and explosive supernovae phenomena. Metals produced by stars and later spread at the mega-parsec scale through the intra-cluster medium (ICM) become a fossil record of the chemical enrichment of the Universe and of the dynamical and feedback mechanisms determining their circulation. As demonstrated by the results of… ▽ More The chemical enrichment of the Universe at all scales is related to stellar winds and explosive supernovae phenomena. Metals produced by stars and later spread at the mega-parsec scale through the intra-cluster medium (ICM) become a fossil record of the chemical enrichment of the Universe and of the dynamical and feedback mechanisms determining their circulation. As demonstrated by the results of the soft X-ray spectrometer onboard Hitomi, high resolution X-ray spectroscopy is the path to to differentiate among the models that consider different metal production mechanisms, predict the outcoming yields, and are function of the nature, mass, and/or initial metallicity of their stellar progenitor. Transformational results shall be achieved through improvements in the energy resolution and effective area of X-ray observatories to detect rare metals (e.g. Na, Al) and constrain yet uncertain abundances (e.g. C, Ne, Ca, Ni). The X-ray Integral Field Unit (X-IFU) instrument onboard the next-generation European X-ray observatory Athena is expected to deliver such breakthroughs. Starting from 100 ks of synthetic observations of 12 abundance ratios in the ICM of four simulated clusters, we demonstrate that the X-IFU will be capable of recovering the input chemical enrichment models at both low ($z = 0.1$) and high ($z = 1$) redshifts, while statistically excluding more than 99.5% of all the other tested combinations of models. By fixing the enrichment models which provide the best fit to the simulated data, we also show that the X-IFU will constrain the slope of the stellar initial mass function within $\sim$12%. These constraints will be key ingredients in our understanding of the chemical enrichment of the Universe and its evolution. △ Less

Submitted 9 October, 2020; v1 submitted 31 July, 2020; originally announced July 2020.

Comments: 17 pages, 6 figures, accepted for publication in A&A

Journal ref: A&A 642, A90 (2020)

QUBIC: the Q & U Bolometric Interferometer for Cosmology

Authors: E. S. Battistelli, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi, D. Auguste, J. Aumont, S. Azzoni, S. Banfi, P. Battaglia, A. Baù, B. Bèlier, D. Bennett, L. Bergè, J. -Ph. Bernard, M. Bersanelli, M. -A. Bigot-Sazy, N. Bleurvacq, J. Bonaparte, J. Bonis, A. Bottani, E. Bunn, D. Burke, D. Buzi , et al. (114 additional authors not shown)

Abstract: The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr… ▽ More The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: Accepted for publication in the Journal of Low Temperature Physics

QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB

Authors: M. Piat, B. Bélier, L. Bergé, N. Bleurvacq, C. Chapron, S. Dheilly, L. Dumoulin, M. González, L. Grandsire, J. -Ch. Hamilton, S. Henrot-Versillé, D. T. Hoang, S. Marnieros, W. Marty, L. Montier, E. Olivieri, C. Oriol, C. Perbost, D. Prêle, D. Rambaud, M. Salatino, G. Stankowiak, J. -P. Thermeau, S. Torchinsky, F. Voisin , et al. (113 additional authors not shown)

Abstract: QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec… ▽ More QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system. △ Less

Submitted 9 December, 2019; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: Conference proceedings submitted to the Journal of Low Temperature Physics for LTD18

Towards map** turbulence in the intra-cluster medium -- II. Measurement uncertainties in the estimation of structure functions

Authors: E. Cucchetti, N. Clerc, E. Pointecouteau, P. Peille, F. Pajot

Abstract: X-ray observations of the hot gas filling the intra-cluster medium provide a wealth of information on the dynamics of clusters of galaxies. The global equilibrium of the ICM is believed to be partially ensured by non-thermal pressure support, notably the dissipation of energy through turbulent motions. Accurate map** of turbulence using X-ray emission lines is challenging due to the lack of spat… ▽ More X-ray observations of the hot gas filling the intra-cluster medium provide a wealth of information on the dynamics of clusters of galaxies. The global equilibrium of the ICM is believed to be partially ensured by non-thermal pressure support, notably the dissipation of energy through turbulent motions. Accurate map** of turbulence using X-ray emission lines is challenging due to the lack of spatially-resolved spectroscopy. Only future instruments such as the X-ray Integral Field Unit (X-IFU) on Athena will have the spatial and spectral resolution to quantitatively investigate the ICM turbulence at all scales. Powerful diagnostics for these studies are line shift and the line broadening maps, and the second-order structure function. When estimating these quantities, instruments will be limited by uncertainties of their measurements, and by the sample variance (aka cosmic variance) of the observation. We extend here the formalism started in our companion paper I to include the effect of statistical uncertainties in the estimation of these line diagnostics, in particular for structure functions. We demonstrate that statistics contribute to the total variance through different terms, which depend on the geometry of the detector, the spatial binning and the nature of the turbulent field. These terms are important when probing the small scales of the turbulence. An application of these equations is performed for the X-IFU, using synthetic turbulent velocity maps of a Coma-like cluster of galaxies. Results are in excellent agreement with the formulas both for the structure function estimation (<3%) and its variance (<10%). The expressions derived here and in paper I are generic, and ensure an estimation of the total errors in any X-ray measurement of turbulent structure functions. They also open the way for optimisations in the upcoming instrumentation and in observational strategies. △ Less

Submitted 26 June, 2019; v1 submitted 12 April, 2019; originally announced April 2019.

Comments: 14 pages, 5 figures, 1 appendix. Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 629, A144 (2019)

Unlocking the Capabilities of Future High-Resolution X-ray Spectroscopy Missions Through Laboratory Astrophysics

Authors: Gabriele Betancourt-Martinez, Hiroki Akamatsu, Didier Barret, Manuel Bautista, Sven Bernitt, Stefano Bianchi, Dennis Bodewits, Nancy Brickhouse, Gregory V. Brown, Elisa Costantini, Marcello Coreno, José R. Crespo López-Urrutia, Renata Cumbee, Megan Eckart, Gary Ferland, Fabrizio Fiore, Michael Fogle, Adam Foster, Javier Garcia, Tom Gorczyca, Victoria Grinberg, Nicolas Grosso, Liyi Gu, Ming Feng Gu, Matteo Guainazzi , et al. (24 additional authors not shown)

Abstract: Thanks to high-resolution and non-dispersive spectrometers onboard future X-ray missions such as XRISM and Athena, we are finally poised to answer important questions about the formation and evolution of galaxies and large-scale structure. However, we currently lack an adequate understanding of many atomic processes behind the spectral features we will soon observe. Large error bars on parameters… ▽ More Thanks to high-resolution and non-dispersive spectrometers onboard future X-ray missions such as XRISM and Athena, we are finally poised to answer important questions about the formation and evolution of galaxies and large-scale structure. However, we currently lack an adequate understanding of many atomic processes behind the spectral features we will soon observe. Large error bars on parameters as critical as transition energies and atomic cross sections can lead to unacceptable uncertainties in the calculations of e.g., elemental abundance, velocity, and temperature. Unless we address these issues, we risk limiting the full scientific potential of these missions. Laboratory astrophysics, which comprises theoretical and experimental studies of the underlying physics behind observable astrophysical processes, is therefore central to the success of these missions. △ Less

Submitted 19 March, 2019; originally announced March 2019.

Comments: Science white paper submitted to the Astro2020 Decadal Survey

The geometry of the magnetic field in the Central Molecular Zone measured by PILOT

Authors: A. Mangilli, J. Aumont, J. -Ph. Bernard, A. Buzzelli, G. de Gasperis, J. B. Durrive, K. Ferrière, G. Foënard, A. Hughes, A. Lacourt, R. Misawa, L. Montier, B. Mot, I. Ristorcelli, H. Roussel, P. Ade, D. Alina, P. de Bernardis, E. de Gouveia Dal Pino, J. P. Dubois, C. Engel, P. Hargrave, R. Laureijs, Y. Longval, B. Maffei , et al. (12 additional authors not shown)

Abstract: We present the first far infrared (FIR) dust emission polarization map covering the full extent Milky Way's Central molecular zone (CMZ). The data, obtained with the PILOT balloon-borne experiment, covers the Galactic Center region $-2\,^\circ<l<2\,^\circ$, $-4\,^\circ<b<3\,^\circ$ at a wavelength of 240 $μ$m and an angular resolution $2.2\,'$. From our measured dust polarization angles, we infer… ▽ More We present the first far infrared (FIR) dust emission polarization map covering the full extent Milky Way's Central molecular zone (CMZ). The data, obtained with the PILOT balloon-borne experiment, covers the Galactic Center region $-2\,^\circ<l<2\,^\circ$, $-4\,^\circ<b<3\,^\circ$ at a wavelength of 240 $μ$m and an angular resolution $2.2\,'$. From our measured dust polarization angles, we infer a magnetic field orientation projected onto the plane of the sky that is remarkably ordered over the full extent of the CMZ, with an average tilt angle of $\simeq 22\,^\circ$ clockwise with respect to the Galactic plane. Our results confirm previous claims that the field traced by dust polarized emission is oriented nearly orthogonal to the field traced by GHz radio synchrotron emission in the Galactic Center region. The observed field structure is globally compatible with the latest Planck polarization data at 353 GHz and 217 GHz. Upon subtraction of the extended emission in our data, the mean field orientation that we obtain shows good agreement with the mean field orientation measured at higher angular resolution by the JCMT within the 20 km/s and 50 km/s molecular clouds. We find no evidence that the magnetic field orientation is related to the 100 pc twisted ring structure within the CMZ. We propose that the low polarization fraction in the Galactic Center region and the highly ordered projected field orientation can be reconciled if the field is strong, with a 3D geometry that is is mostly oriented $\simeq 15\,^\circ$ with respect to the line-of-sight towards the Galactic center. Assuming equipartition between the magnetic pressure and ram pressure, we obtain magnetic field strengths estimates as high as a few mG for several CMZ molecular clouds. △ Less

Submitted 18 January, 2019; originally announced January 2019.

Comments: 17 pages, 14 figures, submitted to A&A

QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer

Authors: Aniello Mennella, Peter Ade, Giorgio Amico, Didier Auguste, Jonathan Aumont, Stefano Banfi, Gustavo Barbaràn, Paola Battaglia, Elia Battistelli, Alessandro Baù, Benoit Bélier, David G. Bennett, Laurent Bergé, Jean Philippe Bernard, Marco Bersanelli, Marie Anne Bigot Sazy, Nathat Bleurvacq, Juan Bonaparte, Julien Bonis, Emory F. Bunn, David Burke, Daniele Buzi, Alessandro Buzzelli, Francesco Cavaliere, Pierre Chanial , et al. (105 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its… ▽ More In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020. △ Less

Submitted 23 January, 2019; v1 submitted 30 November, 2018; originally announced December 2018.

Comments: Proceedings of the 2018 ICNFP conference, Crete. Published by Universe arXiv admin note: text overlap with arXiv:1801.03730

Journal ref: Universe 2019, 5, 42

Thermal architecture for the QUBIC cryogenic receiver

Authors: A. J. May, C. Chapron, G. Coppi, G. D'Alessandro, P. de Bernardis, S. Masi, S. Melhuish, M. Piat, L. Piccirillo, A. Schillaci, J. -P. Thermeau, P. Ade, G. Amico, D. Auguste, J. Aumont, S. Banfi, G. Barbara, P. Battaglia, E. Battistelli, A. Bau, B. Belier, D. Bennett, L. Berge, J. -Ph. Bernard, M. Bersanelli , et al. (105 additional authors not shown)

Abstract: QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt… ▽ More QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX. Vol. 10708. International Society for Optics and Photonics, 2018

Athena X-IFU synthetic observations of galaxy clusters to probe the chemical enrichment of the Universe

Authors: E. Cucchetti, E. Pointecouteau, P. Peille, N. Clerc, E. Rasia, V. Biffi, S. Borgani, L. Tornatore, K. Dolag, M. Roncarelli, M. Gaspari, S. Ettori, E. Bulbul, T. Dauser, J. Wilms, F. Pajot, D. Barret

Abstract: Answers to the metal production of the Universe can be found in galaxy clusters, notably within their Intra-Cluster Medium (ICM). The X-ray Integral Field Unit (X-IFU) on board the next-generation European X-ray observatory Athena (2030s) will provide the necessary leap forward in spatially-resolved spectroscopy required to disentangle the intricate mechanisms responsible for this chemical enrichm… ▽ More Answers to the metal production of the Universe can be found in galaxy clusters, notably within their Intra-Cluster Medium (ICM). The X-ray Integral Field Unit (X-IFU) on board the next-generation European X-ray observatory Athena (2030s) will provide the necessary leap forward in spatially-resolved spectroscopy required to disentangle the intricate mechanisms responsible for this chemical enrichment. In this paper, we investigate the future capabilities of the X-IFU in probing the hot gas within galaxy clusters. From a test sample of four clusters extracted from cosmological hydrodynamical simulations, we present comprehensive synthetic observations of these clusters at different redshifts (up to z = 2) and within the scaled radius R500 performed using the instrument simulator SIXTE. Through 100 ks exposures, we demonstrate that the X-IFU will provide spatially-resolved map** of the ICM physical properties with little to no biases (<5%) and well within statistical uncertainties. The detailed study of abundance profiles and abundance ratios within R500 also highlights the power of the X-IFU in providing constraints on the various enrichment models. From synthetic observations out to z = 2, we also quantify its ability to track the chemical elements across cosmic time with excellent accuracy, and thereby to investigate the evolution of metal production mechanisms as well as the link to the stellar initial mass-function. Our study demonstrates the unprecedented capabilities of the X-IFU in unveiling the properties of the ICM but also stresses the data analysis challenges faced by future high-resolution X-ray missions such as Athena. △ Less

Submitted 24 September, 2018; originally announced September 2018.

Comments: 22 pages, 15 figures

Journal ref: A&A 620, A173 (2018)

The Athena X-ray Integral Field Unit

Authors: Didier Barret, Thien Lam Trong, Jan-Willem den Herder, Luigi Piro, Massimo Cappi, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Kazuhisa Mitsuda, Stéphane Paltani, Gregor Rauw, Agata Rozanska, Joern Wilms, Simon Bandler, Marco Barbera, Xavier Barcons, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Elisa Costantini, Anne Decourchelle, Roland den Hartog, Lionel Duband, Jean-Marc Duval, Fabrizio Fiore , et al. (78 additional authors not shown)

Abstract: The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at… ▽ More The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at about 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 microns. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of about 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a 3He sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (>50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018. △ Less

Submitted 16 July, 2018; originally announced July 2018.

Comments: 15 pages, 5 figures, to appear in Proc. SPIE Astronomical Telescopes and Instrumentation, Austin 2018

Energy scale calibration and drift correction of the X-IFU

Authors: Edoardo Cucchetti, Megan E. Eckart, Philippe Peille, Cor de Vries, François Pajot, Etienne Pointecouteau, Maurice Leutenegger, Caroline A. Kilbourne, Frederick S. Porter

Abstract: The Athena X-Ray Integral Field Unit (X-IFU) will provide spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) over the 0.2 to 12 keV energy band. It will comprise an array of 3840 superconducting Transition Edge Sensors (TESs) operated at 90 mK, with an absolute energy scale accuracy of 0.4 eV. Slight changes in the TES operating environment can cause significant variations i… ▽ More The Athena X-Ray Integral Field Unit (X-IFU) will provide spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) over the 0.2 to 12 keV energy band. It will comprise an array of 3840 superconducting Transition Edge Sensors (TESs) operated at 90 mK, with an absolute energy scale accuracy of 0.4 eV. Slight changes in the TES operating environment can cause significant variations in its energy response function, which may result in degradation of the detector's energy resolution, and eventually in systematic errors in the absolute energy scale if not properly corrected. These changes will be monitored via an onboard Modulated X-ray Source (MXS) and the energy scale will be corrected accordingly using a multi-parameter interpolation of gain curves obtained during ground calibration. Assuming realistic MXS configurations and using the instrument end-to-end simulator SIXTE, we investigate here both statistical and systematic effects on the X-IFU energy scale, occurring either during ground measurements or in-flight. The corresponding impacts on the energy resolution and means of accounting for these errors are also addressed. We notably demonstrate that a multi-parameter gain correction, using both the pulse-height estimate and the baseline of a pulse, can accurately recover systematic effects on the gain due to realistic changes in TES operating conditions within 0.4 eV. Optimisations of this technique with respect to the MXS line configuration and correction time, as well as to the energy scale parametrization are also show promising results to improve the accuracy of the correction. △ Less

Submitted 4 July, 2018; originally announced July 2018.

Comments: 11 pages, 4 figures, SPIE proceeding Austin 2018

Testing the X-IFU calibration requirements: an example for quantum efficiency and energy resolution

Authors: Edoardo Cucchetti, François Pajot, Etienne Pointecouteau, Philippe Peille, Gabriele Betancourt-Martinez, Stephen J. Smith, Marco Barbera, Megan E. Eckart, Simon R. Bandler, Caroline A. Kilbourne, Massimo Cappi, Didier Barret

Abstract: With its array of 3840 Transition Edge Sensors (TESs) operated at 90 mK, the X-Ray Integral Field Unit (X-IFU) on board the ESA L2 mission Athena will provide spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) over the 0.2 to 12 keV bandpass. The in-flight performance of the X-IFU will be strongly affected by the calibration of the instrument. Uncertainties in the knowledge… ▽ More With its array of 3840 Transition Edge Sensors (TESs) operated at 90 mK, the X-Ray Integral Field Unit (X-IFU) on board the ESA L2 mission Athena will provide spatially resolved high-resolution spectroscopy (2.5 eV FWHM up to 7 keV) over the 0.2 to 12 keV bandpass. The in-flight performance of the X-IFU will be strongly affected by the calibration of the instrument. Uncertainties in the knowledge of the overall system, from the filter transmission to the energy scale, may introduce systematic errors in the data, which could potentially compromise science objectives - notably those involving line characterisation e.g. turbulence velocity measurements - if not properly accounted for. Defining and validating calibration requirements is therefore of paramount importance. In this paper, we put forward a simulation tool based on the most up-to-date configurations of the various subsystems (e.g. filters, detector absorbers) which allows us to estimate systematic errors related to uncertainties in the instrumental response. Notably, the effect of uncertainties in the energy resolution and of the instrumental quantum efficiency on X-IFU observations is assessed, by taking as a test case the measurements of the iron K complex in the hot gas surrounding clusters of galaxies. In-flight and ground calibration of the energy resolution and the quantum efficiency is also addressed. We demonstrate that provided an accurate calibration of the instrument, such effects should be low in both cases with respect to statistics during observations. △ Less

Submitted 4 July, 2018; originally announced July 2018.

Comments: 9 pages, 4 figures, SPIE proceeding Austin 2018

Reproducibility and monitoring of the instrumental particle background for the X-Ray Integral Field Unit

Authors: Edoardo Cucchetti, Etienne Pointecouteau, Didier Barret, Simone Lotti, Claudio Macculi, Silvano Molendi, François Pajot, Philippe Peille, Luigi Piro, Gabriel W. Pratt

Abstract: The X-ray Integral Field Unit (X-IFU) is the cryogenic imaging spectrometer on board the future X-ray observatory \textsl{Athena}. With a hexagonal array of 3840 AC-biased Transition Edge Sensors (TES), it will provide narrow-field observations (5$^{\prime}$ equivalent diameter) with unprecedented high spectral resolution (2.5 eV up to 7 keV) over the 0.2 - 12 keV bandpass. Throughout its observat… ▽ More The X-ray Integral Field Unit (X-IFU) is the cryogenic imaging spectrometer on board the future X-ray observatory \textsl{Athena}. With a hexagonal array of 3840 AC-biased Transition Edge Sensors (TES), it will provide narrow-field observations (5$^{\prime}$ equivalent diameter) with unprecedented high spectral resolution (2.5 eV up to 7 keV) over the 0.2 - 12 keV bandpass. Throughout its observations, the X-IFU will face various sources of X-ray background. Specifically, the so-called Non-X-ray Background (NXB) caused by the interaction of high-energy cosmic rays with the instrument, may lead to a degradation of its sensitivity in the observation of faint extended sources (e.g. galaxy clusters outskirts). To limit this effect, a cryogenic anti-coincidence detector (CryoAC) will be placed below the detector plane to lower the NXB level down to the required level of $5 \times 10^{-3}$ cts/s/cm$^{2}$/keV over 2 - 10 keV. In this contribution, we investigate ways to accurately monitor the NXB and ensure the highest reproducibility in-flight. Using the limiting science case of the background-dominated observation of galaxy clusters outskirts, we demonstrate that a reproducibility of 2\% on the absolute knowledge of the background is required to perform driving science objectives, such as measuring abundances and turbulence in the outskirts. Monitoring of the NXB in-flight through closed observations, the detector's CryoAC or the companion instrument (Wide Field Imager) will be used to meet this requirement. △ Less

Submitted 4 July, 2018; originally announced July 2018.

Comments: 11 pages, 4 figures, SPIE proceeding Austin 2018

NIKA 150 GHz polarization observations of the Crab nebula and its spectral energy distribution

Authors: A. Ritacco, J. F. Macías Pérez, N. Ponthieu, R. Adam, P. Ade, P. André, J. Aumont, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, A. Bracco, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. D'Addabbo, M. De Petris, F. X. Désert, S. Doyle, J. Goupy, C. Kramer, G. Lagache, S. Leclercq , et al. (23 additional authors not shown)

Abstract: The Crab nebula is a supernova remnant exhibiting a highly polarized synchrotron radiation at radio and millimeter wavelengths. It is the brightest source in the microwave sky with an extension of 7 by 5 arcminutes and commonly used as a standard candle for any experiment which aims at measuring the polarization of the sky. Though its spectral energy distribution has been well characterized in tot… ▽ More The Crab nebula is a supernova remnant exhibiting a highly polarized synchrotron radiation at radio and millimeter wavelengths. It is the brightest source in the microwave sky with an extension of 7 by 5 arcminutes and commonly used as a standard candle for any experiment which aims at measuring the polarization of the sky. Though its spectral energy distribution has been well characterized in total intensity, polarization data are still lacking at millimetre wavelengths. We report in this paper high resolution (18 arcsec FWHM) observations of the Crab nebula in total intensity and linear polarization at 150 GHz with the NIKA camera. NIKA, operated at the IRAM 30 m telescope from 2012 to 2015, is a camera made of Lumped Element Kinetic Inductance Detectors (LEKIDs) observing the sky at 150 and 260 GHz. From these observations we are able to reconstruct the spatial distribution of the polarization degree and angle of the Crab nebula, which is found to be compatible with previous observations at lower and higher frequencies. Averaging across the source and using other existing data sets we find that the Crab nebula polarization angle is consistent with being constant over a wide range of frequencies with a value of -87.7$^\circ$ +- 0.3 in Galactic coordinates. We also present the first estimation of the Crab nebula spectral energy distribution polarized flux in a wide frequency range: 30-353 GHz. Assuming a single power law emission model we find that the polarization spectral index $β_{pol}$ = - 0.347 +- 0.026 is compatible with the intensity spectral index $β$ = - 0.323 +- 0.001. △ Less

Submitted 6 May, 2018; v1 submitted 25 April, 2018; originally announced April 2018.

Comments: 9 pages, 8 figures, in press, Astronomy and Astrophysics (A&A), 2018

Journal ref: A&A 664, C1 (2022)

PILOT balloon-borne experiment in-flight performance

Authors: A. Mangilli, G. Foënard, J. Aumont, A. Hughes, B. Mot, J-Ph. Bernard, A. Lacourt, I. Ristorcelli, Y. Longval, P. Ade, Y. André, L. Bautista, P. deBernardis, O. Boulade, F. Bousqet, M. Bouzit, V. Buttice, M. Charra, B. Crane, E. Doumayrou, J. P. Dubois, C. Engel, M. Griffin, S. Grabarnik, P. Hargrave , et al. (26 additional authors not shown)

Abstract: The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment aiming at measuring the polarized emission of thermal dust at a wavelength of 240 mm (1.2 THz). A first PILOT flight (flight#1) of the experiment took place from Timmins, Ontario, Canada, in September 2015 and a second flight (flight#2) took place from Alice Springs, Au… ▽ More The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment aiming at measuring the polarized emission of thermal dust at a wavelength of 240 mm (1.2 THz). A first PILOT flight (flight#1) of the experiment took place from Timmins, Ontario, Canada, in September 2015 and a second flight (flight#2) took place from Alice Springs, Australia in april 2017. In this paper, we present the inflight performance of the instrument during these two flights. We concentrate on performances during flight#2, but allude to flight#1 performances if significantly different. We first present a short description of the instrument and the flights. We determine the time constants of our detectors combining inflight information from the signal decay following high energy particle impacts (glitches) and of our internal calibration source. We use these time constants to deconvolve the data timelines and analyse the optical quality of the instrument as measured on planets. We then analyse the structure and polarization of the instrumental background. We measure the detector response flat field and its time variations using the signal from the residual atmosphere and of our internal calibration source. Finally, we analyze the detector noise spectral and temporal properties. The in-flight performances are found to be satisfactory and globally in line with expectations from ground calibrations. We conclude by assessing the expected in-flight sensitivity of the instrument in light of the above in-flight performances. △ Less

Submitted 7 January, 2019; v1 submitted 16 April, 2018; originally announced April 2018.

In-flight measurement of Planck telescope emissivity

Authors: F. Cuttaia, L. Terenzi, G. Morgante, M. Sandri, F. Villa, A. De Rosa, E. Franceschi, M. Frailis, S. Galeotta, A. Gregorio, P. Delannoy, S. Foley, B. Gandolfo, A. Neto, C. Watson, F. Pajot, M. Bersanelli, R. C. Butler, N. Mandolesi, A. Mennella, J. Tauber, A. Zacchei

Abstract: The Planck satellite in orbit mission ended in October 2013. Between the end of Low Frequency Instrument (LFI) routine mission operations and the satellite decommissioning, a dedicated test was also performed to measure the Planck telescope emissivity. The scope of the test was twofold: (i) to provide, for the first time in flight, a direct measure of the telescope emissivity; and (ii) to evaluate… ▽ More The Planck satellite in orbit mission ended in October 2013. Between the end of Low Frequency Instrument (LFI) routine mission operations and the satellite decommissioning, a dedicated test was also performed to measure the Planck telescope emissivity. The scope of the test was twofold: (i) to provide, for the first time in flight, a direct measure of the telescope emissivity; and (ii) to evaluate the possible degradation of the emissivity by comparing data taken in flight at the end of mission with those taken during the ground telescope characterization. The emissivity was determined by heating the Planck telescope and disentangling the system temperature excess measured by the LFI radiometers. Results show End of Life (EOL) performance in good agreement with the results from the ground optical tests and from in-flight indirect estimations measured during the Commissioning and Performance Verification (CPV) phase. Methods and results are presented and discussed. △ Less

Submitted 29 January, 2018; originally announced January 2018.

Comments: 18 pages, 18 pictures. Results from the Planck Satellite "End Of Life" Test Campaign

QUBIC - The Q&U Bolometric Interferometer for Cosmology - A novel way to look at the polarized Cosmic Microwave Background

Authors: A. Mennella, P. A. R. Ade, J. Aumont, S. Banfi, P. Battaglia, E. S. Battistelli, A. Baù, B. Bélier, D. Bennett, L. Bergé, J. Ph. Bernard, M. Bersanelli, M. A. Bigot-Sazy, N. Bleurvacq, G. Bordier, J. Brossard, E. F. Bunn, D. P. Burke, D. Buzi, A. Buzzelli, D. Cammilleri, F. Cavaliere, P. Chanial, C. Chapron, F. Columbro , et al. (83 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument… ▽ More In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument and allows us to clean the measured data from instrumental effects. The first module of QUBIC is a dual band instrument (150 GHz and 220 GHz) that will be deployed in Argentina during the Fall 2018. △ Less

Submitted 11 January, 2018; originally announced January 2018.

Comments: Presented at the EPS Conference on High Energy Physics, Venice (Italy), 5-12 July 2017 Accepted for publication in conference proceedings

Sub-structure and merger detection in resolved NIKA Sunyaev-Zel'dovich images of distant clusters

Authors: R. Adam, O. Hahn, F. Ruppin, P. Ade, P. André, M. Arnaud, I. Bartalucci, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. D'Addabbo, F. -X. Désert, S. Doyle, C. Ferrari, J. Goupy, C. Kramer, G. Lagache, S. Leclercq, J. -F. Lestrade , et al. (26 additional authors not shown)

Abstract: Sub-structures in the hot gas of galaxy clusters are related to their formation history and to the astrophysical processes at play in the intracluster medium (ICM). The thermal Sunyaev-Zel'dovich (tSZ) effect is directly sensitive to the line-of-sight integrated ICM pressure, and is thus particularly adapted to study ICM sub-structures. We apply structure-enhancement filtering algorithms to high r… ▽ More Sub-structures in the hot gas of galaxy clusters are related to their formation history and to the astrophysical processes at play in the intracluster medium (ICM). The thermal Sunyaev-Zel'dovich (tSZ) effect is directly sensitive to the line-of-sight integrated ICM pressure, and is thus particularly adapted to study ICM sub-structures. We apply structure-enhancement filtering algorithms to high resolution tSZ observations of distant clusters, in order to search for pressure discontinuities, compressions, as well as secondary peaks in the ICM. The same filters are applied to synthetic tSZ images extracted from RHAPSODY-G hydrodynamic simulations, in order to better interpret the extracted features. We also study the noise propagation trough the filters and quantify the impact of systematic effects, point source residuals being identified as the dominant potential contaminant. In 3 of our 6 NIKA clusters we identify features at high S/N that show clear evidence for merger events. In MACSJ0717 (z=0.55), three strong pressure gradients are observed on the E, SE and W sectors, and two main peaks in the pressure distribution are identified. We observe a lack of tSZ compact structure in the cool-core cluster PSZ1G045.85 (z=0.61), and a tSZ gradient ridge dominates in the SE. In the highest z cluster, CLJ1227 (z=0.89), we detect a ~45" (360 kpc) long ridge pressure gradient associated with a secondary pressure peak in the W region. Our results show that current tSZ facilities have now reached the angular resolution and sensitivity to allow an exploration of the details of pressure sub-structures in clusters, even at high z. This opens the possibility to quantify the impact of the dynamical state on the relation between the tSZ signal and the mass of clusters, which is important when using tSZ clusters to test cosmological models. This work also marks the first NIKA cluster sample data release. △ Less

Submitted 5 December, 2017; originally announced December 2017.

Comments: Accepted in A&A

Journal ref: A&A 614, A118 (2018)

Map** the hot gas temperature in galaxy clusters using X-ray and Sunyaev-Zel'dovich imaging

Authors: R. Adam, M. Arnaud, I. Bartalucci, P. Ade, P. André, A. Beelen, A. Benoît, A. Bideaud, N. Billot, H. Bourdin, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. D'Addabbo, F. -X. Désert, S. Doyle, C. Ferrari, J. Goupy, C. Kramer, G. Lagache, S. Leclercq, J. -F. Macías-Pérez, S. Maurogordato , et al. (20 additional authors not shown)

Abstract: We propose a method to map the temperature distribution of the hot gas in galaxy clusters that uses resolved images of the thermal Sunyaev-Zel'dovich (tSZ) effect in combination with X-ray data. Application to images from the New IRAM KIDs Array (NIKA) and XMM-Newton allows us to measure and determine the spatial distribution of the gas temperature in the merging cluster MACS J0717.5+3745, at… ▽ More We propose a method to map the temperature distribution of the hot gas in galaxy clusters that uses resolved images of the thermal Sunyaev-Zel'dovich (tSZ) effect in combination with X-ray data. Application to images from the New IRAM KIDs Array (NIKA) and XMM-Newton allows us to measure and determine the spatial distribution of the gas temperature in the merging cluster MACS J0717.5+3745, at $z=0.55$. Despite the complexity of the target object, we find a good morphological agreement between the temperature maps derived from X-ray spectroscopy only -- using XMM-Newton ($T_{\rm XMM}$) and Chandra ($T_{\rm CXO}$) -- and the new gas-mass-weighted tSZ+X-ray imaging method ($T_{\rm SZ}$). We correlate the temperatures from tSZ+X-ray imaging and those from X-ray spectroscopy alone and find that $T_{\rm SZ}$ is higher than $T_{\rm XMM}$ and lower than $T_{\rm CXO}$ by $\sim 10\%$ in both cases. Our results are limited by uncertainties in the geometry of the cluster gas, contamination from kinetic SZ ($\sim 10\%$), and the absolute calibration of the tSZ map ($7\%$). Investigation using a larger sample of clusters would help minimise these effects. △ Less

Submitted 21 July, 2017; v1 submitted 30 June, 2017; originally announced June 2017.

Comments: Accepted in AA, 8 pages, 4 figures, 1 table

Journal ref: A&A 606, A64 (2017)

Probing changes of dust properties along a chain of solar-type prestellar and protostellar cores in Taurus with NIKA

Authors: A. Bracco, P. Palmeirim, Ph. André, R. Adam, P. Ade, A. Bacmann, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. D'Addabbo, F. -X. Désert, P. Didelon, S. Doyle, J. Goupy, V. Konyves, C. Kramer, G. Lagache, S. Leclercq, J. F. Macías-Pérez , et al. (23 additional authors not shown)

Abstract: The characterization of dust properties in the interstellar medium (ISM) is key for star formation. Mass estimates are crucial to determine gravitational collapse conditions for the birth of new stellar objects in molecular clouds. However, most of these estimates rely on dust models that need further observational constraints from clouds to prestellar and protostellar cores. We present results of… ▽ More The characterization of dust properties in the interstellar medium (ISM) is key for star formation. Mass estimates are crucial to determine gravitational collapse conditions for the birth of new stellar objects in molecular clouds. However, most of these estimates rely on dust models that need further observational constraints from clouds to prestellar and protostellar cores. We present results of a study of dust emissivity changes based on mm-continuum data obtained with the NIKA camera at the IRAM-30m telescope. Observing dust emission at 1.15 mm and 2 mm allows us to constrain the dust emissivity index ($β$) in the Rayleigh-Jeans tail of the dust spectral energy distribution (SED) far from its peak emission, where the contribution of other parameters (i.e. dust temperature) is important. Focusing on the Taurus molecular cloud, a low-mass star-forming regions in the Gould Belt, we analyze the emission properties of several distinct objects in the B213 filament: three prestellar cores, two Class-0/I protostellar cores and one Class-II object. By means of the ratio of the two NIKA channel-maps, we show that in the Rayleigh-Jeans approximation the dust emissivity index varies among the objects. For one prestellar and two protostellar cores, we produce a robust study using Herschel data to constrain the dust temperature of the sources. By using the Abel transform inversion technique we get accurate radial $β$ profiles. We find systematic spatial variations of $β$ in the protostellar cores that is not observed in the prestellar core. While in the former case $β$ decreases toward the center, in the latter it remains constant. Moreover, $β$ appears anticorrelated with the dust temperature. We discuss the implication of these results in terms of dust grain evolution between pre- and protostellar cores. △ Less

Submitted 26 June, 2017; originally announced June 2017.

Journal ref: A&A 604, A52 (2017)

QUBIC Technical Design Report

Authors: J. Aumont, S. Banfi, P. Battaglia, E. S. Battistelli, A. Baù, B. Bélier, D. Bennett, L. Bergé, J. Ph. Bernard, M. Bersanelli, M. A. Bigot-Sazy, N. Bleurvacq, G. Bordier, J. Brossard, E. F. Bunn, D. Buzi, A. Buzzelli, D. Cammilleri, F. Cavaliere, P. Chanial, C. Chapron, G. Coppi, A. Coppolecchia, F. Couchot, R. D'Agostino , et al. (74 additional authors not shown)

Abstract: QUBIC is an instrument aiming at measuring the B mode polarisation anisotropies at medium scales angular scales (30-200 multipoles). The search for the primordial CMB B-mode polarization signal is challenging, because of many difficulties: smallness of the expected signal, instrumental systematics that could possibly induce polarization leakage from the large E signal into B, brighter than anticip… ▽ More QUBIC is an instrument aiming at measuring the B mode polarisation anisotropies at medium scales angular scales (30-200 multipoles). The search for the primordial CMB B-mode polarization signal is challenging, because of many difficulties: smallness of the expected signal, instrumental systematics that could possibly induce polarization leakage from the large E signal into B, brighter than anticipated polarized foregrounds (dust) reducing to zero the initial hope of finding sky regions clean enough to have a direct primordial B-modes observation. The QUBIC instrument is designed to address all aspects of this challenge with a novel kind of instrument, a Bolometric Interferometer, combining the background-limited sensitivity of Transition-Edge-Sensors and the control of systematics allowed by the observation of interference fringe patterns, while operating at two frequencies to disentangle polarized foregrounds from primordial B mode polarization. Its characteristics are described in details in this Technological Design Report. △ Less

Submitted 11 May, 2017; v1 submitted 14 September, 2016; originally announced September 2016.

Comments: 139 pages ; high resolution version can be found on the qubic website (http://qubic.in2p3.fr/QUBIC/Home.html) minor changes : update author list & affiliations ; correct title

Polarimetry at millimeter wavelengths with the NIKA camera: calibration and performance

Authors: A. Ritacco, N. Ponthieu, A. Catalano, R. Adam, P. Ade, P. André, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, G. Coiffard, B. Comis, F. -X. Désert, S. Doyle, J. Goupy, C. Kramer, S. Leclercq, J. F. Macías-Pérez, P. Mauskopf, A. Maury, F. Mayet, A. Monfardini, F. Pajot , et al. (15 additional authors not shown)

Abstract: Magnetic fields, which play a major role in a large number of astrophysical processes from galactic to cosmological scales, can be traced via observations of dust polarization as demonstrated by the Planck satellite results. In particular, low-resolution observations of dust polarization have demonstrated that Galactic filamentary structures, where star formation takes place, are associated to wel… ▽ More Magnetic fields, which play a major role in a large number of astrophysical processes from galactic to cosmological scales, can be traced via observations of dust polarization as demonstrated by the Planck satellite results. In particular, low-resolution observations of dust polarization have demonstrated that Galactic filamentary structures, where star formation takes place, are associated to well organized magnetic fields. A better understanding of this process requires detailed observations of galactic dust polarization on scales of 0.01 to 0.1 pc. Such high-resolution polarization observations can be carried out at the IRAM 30 m telescope using the recently installed NIKA2 camera, which features two frequency bands at 260 and 150 GHz (respectively 1.15 and 2.05 mm), the 260 GHz band being polarization sensitive. NIKA2 so far in commissioning phase, has its focal plane filled with ~3300 detectors to cover a Field of View (FoV) of 6.5 arcminutes diameter. The NIKA camera, which consisted of two arrays of 132 and 224 Lumped Element Kinetic Inductance Detectors (LEKIDs) and a FWHM (Full-Width-Half-Maximum) of 12 and 18.2 arcsecond at 1.15 and 2.05 mm respectively, has been operated at the IRAM 30 m telescope from 2012 to 2015 as a test-bench for NIKA2. NIKA was equipped of a room temperature polarization system (a half wave plate (HWP) and a grid polarizer facing the NIKA cryostat window). The fast and continuous rotation of the HWP permits the quasi simultaneous reconstruction of the three Stokes parameters, I, Q and U at 150 and 260 GHz. This paper presents the first polarization measurements with KIDs and reports the polarization performance of the NIKA camera and the pertinence of the choice of the polarization setup in the perspective of NIKA2. (abridged) △ Less

Submitted 24 February, 2017; v1 submitted 7 September, 2016; originally announced September 2016.

Journal ref: A&A 599, A34 (2017)

The Athena X-ray Integral Field Unit (X-IFU)

Authors: Didier Barret, Thien Lam Trong, Jan-Willem den Herder, Luigi Piro, Xavier Barcons, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Kazuhisa Mitsuda, Stéphane Paltani, Gregor Rauw, Agata Rożanska, Joern Wilms, Marco Barbera, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Anne Decourchelle, Roland den Hartog, Jean-Marc Duval, Fabrizio Fiore, Flavio Gatti, Andrea Goldwurm, Brian Jackson, Peter Jonker , et al. (66 additional authors not shown)

Abstract: The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, d… ▽ More The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we briefly describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution). The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan. △ Less

Submitted 29 August, 2016; originally announced August 2016.

Comments: 41 pages, 18 Figures

Journal ref: Proc. SPIE. 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 99052F. (August 17, 2016)

Non-parametric deprojection of NIKA SZ observations: Pressure distribution in the Planck-discovered cluster PSZ1 G045.85+57.71

Authors: F. Ruppin, R. Adam, B. Comis, P. Ade, P. André, M. Arnaud, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, A. D'Addabbo, M. De Petris, F. -X. Désert, S. Doyle, J. Goupy, C. Kramer, S. Leclercq, J. F. Macías-Pérez, P. Mauskopf, F. Mayet, A. Monfardini , et al. (16 additional authors not shown)

Abstract: The determination of the thermodynamic properties of clusters of galaxies at intermediate and high redshift can bring new insights into the formation of large-scale structures. It is essential for a robust calibration of the mass-observable scaling relations and their scatter, which are key ingredients for precise cosmology using cluster statistics. Here we illustrate an application of high resolu… ▽ More The determination of the thermodynamic properties of clusters of galaxies at intermediate and high redshift can bring new insights into the formation of large-scale structures. It is essential for a robust calibration of the mass-observable scaling relations and their scatter, which are key ingredients for precise cosmology using cluster statistics. Here we illustrate an application of high resolution $(< 20$ arcsec) thermal Sunyaev-Zel'dovich (tSZ) observations by probing the intracluster medium (ICM) of the \planck-discovered galaxy cluster \psz\ at redshift $z = 0.61$, using tSZ data obtained with the NIKA camera, which is a dual-band (150 and 260~GHz) instrument operated at the IRAM 30-meter telescope. We deproject jointly NIKA and \planck\ data to extract the electronic pressure distribution from the cluster core ($R \sim 0.02\, R_{500}$) to its outskirts ($R \sim 3\, R_{500}$) non-parametrically for the first time at intermediate redshift. The constraints on the resulting pressure profile allow us to reduce the relative uncertainty on the integrated Compton parameter by a factor of two compared to the \planck\ value. Combining the tSZ data and the deprojected electronic density profile from \xmm\ allows us to undertake a hydrostatic mass analysis, for which we study the impact of a spherical model assumption on the total mass estimate. We also investigate the radial temperature and entropy distributions. These data indicate that \psz\ is a massive ($M_{500} \sim 5.5 \times 10^{14}$ M$_{\odot}$) cool-core cluster. This work is part of a pilot study aiming at optimizing the treatment of the NIKA2 tSZ large program dedicated to the follow-up of SZ-discovered clusters at intermediate and high redshifts. (abridged) △ Less

Submitted 5 October, 2016; v1 submitted 26 July, 2016; originally announced July 2016.

Comments: 16 pages, 10 figures

Journal ref: A&A 597, A110 (2017)

Map** the kinetic Sunyaev-Zel'dovich effect toward MACS J0717.5+3745 with NIKA

Authors: R. Adam, I. Bartalucci, G. W. Pratt, P. Ade, P. André, M. Arnaud, A. Beelen, A. Benoît, A. Bideaud, N. Billot, H. Bourdin, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. D'Addabbo, M. De Petris, J. Démoclès, F. -X. Désert, S. Doyle, E. Egami, C. Ferrari, J. Goupy, C. Kramer , et al. (25 additional authors not shown)

Abstract: Measurement of the gas velocity distribution in galaxy clusters provides insight into the physics of mergers, through which large scale structures form in the Universe. Velocity estimates within the intracluster medium (ICM) can be obtained via the Sunyaev-Zel'dovich (SZ) effect, but its observation is challenging both in term of sensitivity requirement and control of systematic effects, including… ▽ More Measurement of the gas velocity distribution in galaxy clusters provides insight into the physics of mergers, through which large scale structures form in the Universe. Velocity estimates within the intracluster medium (ICM) can be obtained via the Sunyaev-Zel'dovich (SZ) effect, but its observation is challenging both in term of sensitivity requirement and control of systematic effects, including the removal of contaminants. In this paper we report resolved observations, at 150 and 260 GHz, of the SZ effect toward the triple merger MACS J0717.5+3745 (z=0.55), using data obtained with the NIKA camera at the IRAM 30m telescope. Assuming that the SZ signal is the sum of a thermal (tSZ) and a kinetic (kSZ) component and by combining the two NIKA bands, we extract for the first time a resolved map of the kSZ signal in a cluster. The kSZ signal is dominated by a dipolar structure that peaks at -5.1 and +3.4 sigma, corresponding to two subclusters moving respectively away and toward us and coincident with the cold dense X-ray core and a hot region undergoing a major merging event. We model the gas electron density and line-of-sight velocity of MACS J0717.5+3745 as four subclusters. Combining NIKA data with X-ray observations from XMM-Newton and Chandra, we fit this model to constrain the gas line-of-sight velocity of each component, and we also derive, for the first time, a velocity map from kSZ data (i.e. that is model-dependent). Our results are consistent with previous constraints on the merger velocities, and thanks to the high angular resolution of our data, we are able to resolve the structure of the gas velocity. Finally, we investigate possible contamination and systematic effects with a special care given to radio and submillimeter galaxies. Among the sources that we detect with NIKA, we find one which is likely to be a high redshift lensed submillimeter galaxy. △ Less

Submitted 8 December, 2016; v1 submitted 24 June, 2016; originally announced June 2016.

Comments: 19 pages, 9 figures, accepted in A&A

Journal ref: A&A 598, A115 (2017)

Planck intermediate results. XLV. Radio spectra of northern extragalactic radio sources

Authors: Planck Collaboration, P. A. R. Ade, N. Aghanim, M. Arnaud, M. Ashdown, J. Aumont, C. Baccigalupi, A. J. Banday, R. B. Barreiro, N. Bartolo, E. Battaner, R. Battye, K. Benabed, G. J. Bendo, A. Benoit-Lévy, J. -P. Bernard, M. Bersanelli, P. Bielewicz, A. Bonaldi, L. Bonavera, J. R. Bond, J. Borrill, F. R. Bouchet, C. Burigana, R. C. Butler , et al. (180 additional authors not shown)

Abstract: Continuum spectra covering centimetre to submillimetre wavelengths are presented for a northern sample of 104 extragalactic radio sources, mainly active galactic nuclei, based on four-epoch Planck data. The nine Planck frequencies, from 30 to 857 GHz, are complemented by a set of simultaneous ground-based radio observations between 1.1 and 37 GHz. The single-survey Planck data confirm that the fla… ▽ More Continuum spectra covering centimetre to submillimetre wavelengths are presented for a northern sample of 104 extragalactic radio sources, mainly active galactic nuclei, based on four-epoch Planck data. The nine Planck frequencies, from 30 to 857 GHz, are complemented by a set of simultaneous ground-based radio observations between 1.1 and 37 GHz. The single-survey Planck data confirm that the flattest high-frequency radio spectral indices are close to zero, indicating that the original accelerated electron energy spectrum is much harder than commonly thought, with power-law index around 1.5 instead of the canonical 2.5. The radio spectra peak at high frequencies and exhibit a variety of shapes. For a small set of low-z sources, we find a spectral upturn at high frequencies, indicating the presence of intrinsic cold dust. Variability can generally be approximated by achromatic variations, while sources with clear signatures of evolving shocks appear to be limited to the strongest outbursts. △ Less

Submitted 16 June, 2016; originally announced June 2016.

Comments: 39 pages, 113 figures. Accepted by A&A

High angular resolution SZ observations with NIKA and NIKA2

Authors: B. Comis, R. Adam, P. Ade, P. André, M. Arnaud, I. Bartalucci, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, F. -X. Désert, S. Doyle, J. Goupy, C. Kramer, G. Lagache, S. Leclercq, J. F. Macías-Pérez, P. Mauskopf, F. Mayet, A. Monfardini, F. Pajot , et al. (17 additional authors not shown)

Abstract: NIKA2 (New IRAM KID Arrays) is a dual band (150 and 260 GHz) imaging camera based on Kinetic Inductance Detectors (KIDs) and designed to work at the IRAM 30 m telescope (Pico Veleta, Spain). Built on the experience of the NIKA prototype, NIKA2 has been installed at the 30 m focal plane in October 2015 and the commissioning phase is now ongoing. Through the thermal Sunyaev-Zeldovich (tSZ) effect, N… ▽ More NIKA2 (New IRAM KID Arrays) is a dual band (150 and 260 GHz) imaging camera based on Kinetic Inductance Detectors (KIDs) and designed to work at the IRAM 30 m telescope (Pico Veleta, Spain). Built on the experience of the NIKA prototype, NIKA2 has been installed at the 30 m focal plane in October 2015 and the commissioning phase is now ongoing. Through the thermal Sunyaev-Zeldovich (tSZ) effect, NIKA2 will image the ionized gas residing in clusters of galaxies with a resolution of 12 and 18 arcsec FWHM (at 150 and 260 GHz, respectively). We report on the recent tSZ measurements with the NIKA camera and discuss the future objectives for the NIKA2 SZ large Program, 300h of observation dedicated to SZ science. With this program we intend to perform a high angular resolution follow-up of a cosmologically-representative sample of clusters belonging to SZ catalogues, with redshift greater than 0.5. The main output of the program will be the study of the redshift evolution of the cluster pressure profile as well as that of the scaling laws relating the cluster global properties. △ Less

Submitted 31 May, 2016; originally announced May 2016.

Comments: 8 pages, 3 figures, Proceedings of the "50th Rencontres de Moriond" Cosmology Session, La Thuile, Italy, March 19-26, 2016

The NIKA2 commissioning campaign: performance and first results

Authors: A. Catalano, R. Adam, P. Ade, P. André, H. Aussel, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, G. Coiffard, B. Comis, F. -X. Désert, S. Doyle, J. Goupy, C. F. Kramer, G. Lagache, S. Leclercq, J. F. Lestrade, J. F. Macías-Pérez, A. Maury, P. Mauskopf, F. Mayet, A. Monfardini , et al. (17 additional authors not shown)

Abstract: The New IRAM KID Array 2 (NIKA 2) is a dual-band camera operating with three frequency-multiplexed kilopixels arrays of Lumped Element Kinetic Inductance Detectors (LEKID) cooled at 150 mK. NIKA 2 is designed to observe the intensity and polarisation of the sky at 1.15 and 2.0 mm wavelength from the IRAM 30 m telescope. The NIKA 2 instrument represents a huge step in performance as compared to the… ▽ More The New IRAM KID Array 2 (NIKA 2) is a dual-band camera operating with three frequency-multiplexed kilopixels arrays of Lumped Element Kinetic Inductance Detectors (LEKID) cooled at 150 mK. NIKA 2 is designed to observe the intensity and polarisation of the sky at 1.15 and 2.0 mm wavelength from the IRAM 30 m telescope. The NIKA 2 instrument represents a huge step in performance as compared to the NIKA pathfinder instrument, which has already shown state-of-the-art detector and photometric performance. After the commissioning planned to be accomplished at the end of 2016, NIKA 2 will be an IRAM resident instrument for the next ten years or more. NIKA 2 should allow the astrophysical community to tackle a large number of open questions reaching from the role of the Galactic magnetic field in star formation to the discrepancy between cluster-based and CMB-based cosmology possibly induced by the unknown cluster physics. We present an overview of the commissioning phase together with some first results. △ Less

Submitted 31 May, 2016; v1 submitted 27 May, 2016; originally announced May 2016.

Comments: 11 pages

Planck intermediate results. XLIII. The spectral energy distribution of dust in clusters of galaxies

Authors: Planck Collaboration, R. Adam, P. A. R. Ade, N. Aghanim, M. Ashdown, J. Aumont, C. Baccigalupi, R. B. Barreiro, N. Bartolo, E. Battaner, K. Benabed, A. Benoit-Lévy, M. Bersanelli, P. Bielewicz, I. Bikmaev, A. Bonaldi, J. R. Bond, J. Borrill, F. R. Bouchet, R. Burenin, C. Burigana, E. Calabrese, J. -F. Cardoso, A. Catalano, H. C. Chiang , et al. (155 additional authors not shown)

Abstract: Although infrared (IR) overall dust emission from clusters of galaxies has been statistically detected using data from the Infrared Astronomical Satellite (IRAS), it has not been possible to sample the spectral energy distribution (SED) of this emission over its peak, and thus to break the degeneracy between dust temperature and mass. By complementing the IRAS spectral coverage with Planck satelli… ▽ More Although infrared (IR) overall dust emission from clusters of galaxies has been statistically detected using data from the Infrared Astronomical Satellite (IRAS), it has not been possible to sample the spectral energy distribution (SED) of this emission over its peak, and thus to break the degeneracy between dust temperature and mass. By complementing the IRAS spectral coverage with Planck satellite data from 100 to 857 GHz, we provide new constraints on the IR spectrum of thermal dust emission in clusters of galaxies. We achieve this by using a stacking approach for a sample of several hundred objects from the Planck cluster sample; this procedure averages out fluctuations from the IR sky, allowing us to reach a significant detection of the faint cluster contribution. We also use the large frequency range probed by Planck, together with component-separation techniques, to remove the contamination from both cosmic microwave background anisotropies and the thermal Sunyaev-Zeldovich effect (tSZ) signal, which dominate below 353 GHz. By excluding dominant spurious signals or systematic effects, averaged detections are reported at frequencies between 353 and 5000 GHz. We confirm the presence of dust in clusters of galaxies at low and intermediate redshifts, yielding an SED with a shape similar to that of the Milky Way. Planck's beam does not allow us to investigate the detailed spatial distribution of this emission (e.g., whether it comes from intergalactic dust or simply the dust content of the cluster galaxies), but the radial distribution of the emission appears to follow that of the stacked SZ signal, and thus the extent of the clusters. The recovered SED allows us to constrain the dust mass responsible for the signal, as well as its temperature. We additionally explore the evolution of the IR emission as a function of cluster mass and redshift. △ Less

Submitted 15 March, 2016; originally announced March 2016.

Comments: 14 pages and 7 figures. Submitted to A&A

Journal ref: A&A 596, A104 (2016)

High-resolution tSZ cartography of clusters of galaxies with NIKA at the IRAM 30-m telescope

Authors: F. Mayet, R. Adam, A. Adane, P. Ade, P. André, M. Arnaud, I. Bartalucci, A. Beelen, A. Benoît, A. Bideaud, N. Billot, G. Blanquer, N. Boudou, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, A. Cruciani, F. -X. Désert, S. Doyle, J. Goupy, B. Hasnoun, I. Hermelo, C. Kramer , et al. (19 additional authors not shown)

Abstract: The thermal Sunyaev-Zeldovich effect (tSZ) is a powerful probe to study clusters of galaxies and is complementary with respect to X-ray, lensing or optical observations. Previous arcmin resolution tSZ observations ({\it e.g.} SPT, ACT and Planck) only enabled detailed studies of the intra-cluster medium morphology for low redshift clusters ($z < 0.2$). Thus, the development of precision cosmology… ▽ More The thermal Sunyaev-Zeldovich effect (tSZ) is a powerful probe to study clusters of galaxies and is complementary with respect to X-ray, lensing or optical observations. Previous arcmin resolution tSZ observations ({\it e.g.} SPT, ACT and Planck) only enabled detailed studies of the intra-cluster medium morphology for low redshift clusters ($z < 0.2$). Thus, the development of precision cosmology with clusters requires high angular resolution observations to extend the understanding of galaxy cluster towards high redshift. NIKA2 is a wide-field (6.5 arcmin field of view) dual-band camera, operated at $100 \ {\rm mK}$ and containing $\sim 3300$ KID (Kinetic Inductance Detectors), designed to observe the millimeter sky at 150 and 260 GHz, with an angular resolution of 18 and 12 arcsec respectively. The NIKA2 camera has been installed on the IRAM 30-m telescope (Pico Veleta, Spain) in September 2015. The NIKA2 tSZ observation program will allow us to observe a large sample of clusters (50) at redshift ranging between 0.5 and 1. As a pathfinder for NIKA2, several clusters of galaxies have been observed at the IRAM 30-m telescope with the NIKA prototype to cover the various configurations and observation conditions expected for NIKA2. △ Less

Submitted 25 February, 2016; originally announced February 2016.

Comments: Proceedings of the 28th Texas Symposium on Relativistic Astrophysics, Geneva, Switzerland, December 13-18, 2015

NIKA 2: next-generation continuum/polarized camera at the IRAM 30 m telescope and its prototype

Authors: A. Ritacco, R. Adam, A. Adane, P. Ade, P. André, A. Beelen, A. Benoît, A. Bideaud, N. Billot, O. Bourrion, M. Calvo, A. Catalano, G. Coiffard, B. Comis, F. -X. Désert, S. Doyle, J. Goupy, C. Kramer, S. Leclercq, J. F. Macías-Pérez, P. Mauskopf, A. Maury, F. Mayet, A. Monfardini, F. Pajot , et al. (14 additional authors not shown)

Abstract: NIKA 2 (New Instrument of Kids Array) is a next generation continuum and polarized instrument successfully installed in October 2015 at the IRAM 30 m telescope on Pico-Veleta (Granada, Spain). NIKA 2 is a high resolution dual-band camera, operating with frequency multiplexed LEKIDs (Lumped Element Kinetic Inductance Detectors) cooled at 100 mK. Dual color images are obtained thanks to the simultan… ▽ More NIKA 2 (New Instrument of Kids Array) is a next generation continuum and polarized instrument successfully installed in October 2015 at the IRAM 30 m telescope on Pico-Veleta (Granada, Spain). NIKA 2 is a high resolution dual-band camera, operating with frequency multiplexed LEKIDs (Lumped Element Kinetic Inductance Detectors) cooled at 100 mK. Dual color images are obtained thanks to the simultaneous readout of a 1020 pixels array at 2 mm and 1140 x 2 pixels arrays at 1.15 mm with a final resolution of 18 and 12 arcsec respectively, and 6.5 arcmin of Field of View (FoV). The two arrays at 1.15 mm allow us to measure the linear polarization of the incoming light. This will place NIKA 2 as an instrument of choice to study the role of magnetic fields in the star formation process. The NIKA experiment, a prototype for NIKA 2 with a reduced number of detectors (about 400 LEKIDs) and FoV (1.8 arcmin), has been successfully operated at the IRAM 30 telescope in several open observational campaigns. The performance of the NIKA 2 polarization setup has been successfully validated with the NIKA prototype. △ Less

Submitted 4 February, 2016; originally announced February 2016.

Comments: 5 pages, 4 figures, proceeding for the conference: Extragalactic radio surveys 2015