-
Barocaloric effect of elastomers and plastic crystals: an outlook
Authors:
Vivian Andrade,
Lucas S. Paixão,
Alexandre M. G. Carvalho,
Victorino Franco,
Mario S. Reis
Abstract:
The urge for efficient and environmentally friendly alternatives for the current gas-based refrigeration is becoming more critical due to global warming and overpopulation. Among the main candidates, solid-state-based cooling technology is appealing to substitute the conventional systems. Recently, attention has been turned to the barocaloric effect in advanced materials, namely, plastic crystals…
▽ More
The urge for efficient and environmentally friendly alternatives for the current gas-based refrigeration is becoming more critical due to global warming and overpopulation. Among the main candidates, solid-state-based cooling technology is appealing to substitute the conventional systems. Recently, attention has been turned to the barocaloric effect in advanced materials, namely, plastic crystals and elastomers, with reports revealing great caloric responses around room temperature for a series of materials. In this sense, this review has the goal of collecting, organizing and comparing the results from the literature to provide an outlook on the subject.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
High-field specific heat and entropy obtained from adiabatic temperature change
Authors:
L. S. Paixão,
E. O. Usuda,
W. Imamura,
A. M. G. Carvalho
Abstract:
Specific heat and entropy are relevant thermodynamic properties, which may be used as macroscopic probes to microscopic properties of materials under ambient conditions and under high applied fields. However, the measurement of specific heat under intense external fields can be a challenging task, as well as to obtain the entropy in the same conditions. Here, we describe a method to obtain high-fi…
▽ More
Specific heat and entropy are relevant thermodynamic properties, which may be used as macroscopic probes to microscopic properties of materials under ambient conditions and under high applied fields. However, the measurement of specific heat under intense external fields can be a challenging task, as well as to obtain the entropy in the same conditions. Here, we describe a method to obtain high-field specific heat and entropy from measurements of specific heat under ambient conditions and direct temperature change induced by adiabatic field changes. We derive straightforward thermodynamic equations to calculate the specific heat and entropy and our results agree satisfactorily with experimental data of specific heat under magnetic field, electric field, and pressure.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
Sleep Apnea and Respiratory Anomaly Detection from a Wearable Band and Oxygen Saturation
Authors:
Wolfgang Ganglberger,
Abigail A. Bucklin,
Ryan A. Tesh,
Madalena Da Silva Cardoso,
Haoqi Sun,
Michael J. Leone,
Luis Paixao,
Ezhil Panneerselvam,
Elissa M. Ye,
B. Taylor Thompson,
Oluwaseun Akeju,
David Kuller,
Robert J. Thomas,
M. Brandon Westover
Abstract:
Objective: Sleep related respiratory abnormalities are typically detected using polysomnography. There is a need in general medicine and critical care for a more convenient method to automatically detect sleep apnea from a simple, easy-to-wear device. The objective is to automatically detect abnormal respiration and estimate the Apnea-Hypopnea-Index (AHI) with a wearable respiratory device, compar…
▽ More
Objective: Sleep related respiratory abnormalities are typically detected using polysomnography. There is a need in general medicine and critical care for a more convenient method to automatically detect sleep apnea from a simple, easy-to-wear device. The objective is to automatically detect abnormal respiration and estimate the Apnea-Hypopnea-Index (AHI) with a wearable respiratory device, compared to an SpO2 signal or polysomnography using a large (n = 412) dataset serving as ground truth. Methods: Simultaneously recorded polysomnographic (PSG) and wearable respiratory effort data were used to train and evaluate models in a cross-validation fashion. Time domain and complexity features were extracted, important features were identified, and a random forest model employed to detect events and predict AHI. Four models were trained: one each using the respiratory features only, a feature from the SpO2 (%)-signal only, and two additional models that use the respiratory features and the SpO2 (%)-feature, one allowing a time lag of 30 seconds between the two signals. Results: Event-based classification resulted in areas under the receiver operating characteristic curves of 0.94, 0.86, 0.82, and areas under the precision-recall curves of 0.48, 0.32, 0.51 for the models using respiration and SpO2, respiration-only, and SpO2-only respectively. Correlation between expert-labelled and predicted AHI was 0.96, 0.78, and 0.93, respectively. Conclusions: A wearable respiratory effort signal with or without SpO2 predicted AHI accurately. Given the large dataset and rigorous testing design, we expect our models are generalizable to evaluating respiration in a variety of environments, such as at home and in critical care.
△ Less
Submitted 23 February, 2021;
originally announced February 2021.
-
Night-to-Night Variability of Sleep Electroencephalography-Based Brain Age Measurements
Authors:
Jacob Hogan,
Haoqi Sun,
Luis Paixao,
Mike Westmeijer,
Pooja Sikka,
**g **,
Ryan Tesh,
Madalena Cardoso,
Sydney S. Cash,
Oluwaseun Akeju,
Robert Thomas,
M. Brandon Westover
Abstract:
Objective Brain Age Index (BAI), calculated from sleep electroencephalography (EEG), has been proposed as a biomarker of brain health. This study quantifies night-to-night variability of BAI and establishes probability thresholds for inferring underlying brain pathology based on a patient's BAI.
Methods 86 patients with multiple nights of consecutive EEG recordings were selected from Epilepsy Mo…
▽ More
Objective Brain Age Index (BAI), calculated from sleep electroencephalography (EEG), has been proposed as a biomarker of brain health. This study quantifies night-to-night variability of BAI and establishes probability thresholds for inferring underlying brain pathology based on a patient's BAI.
Methods 86 patients with multiple nights of consecutive EEG recordings were selected from Epilepsy Monitoring Unit patients whose EEGs reported as being within normal limits. BAI was calculated for each 12-hour segment of patient data using a previously described algorithm, and night-to-night variability in BAI was measured.
Results The within-patient night-to-night standard deviation in BAI was 7.5 years. Estimates of BAI derived by averaging over 2, 3, and 4 nights had standard deviations of 4.7, 3.7, and 3.0 years, respectively.
Conclusions Averaging BAI over n nights reduces night-to-night variability of BAI by a factor of the square root of n, rendering BAI more suitable as a biomarker of brain health at the individual level.
Significance With increasing ease of EEG acquisition including wearable technology, BAI has the potential to track brain health and detect deviations from normal physiologic function. In a clinical setting, BAI could be used to identify patients who should undergo further investigation or monitoring.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
A Novel Option for Waste Tire Rubber Reutilization: Refrigerant in Solid-State Cooling Devices
Authors:
Nicolau Molina Bom,
Érik Oda Usuda,
Mariana da Silva Gigliotti,
Denílson José Marcolino de Aguiar,
William Imamura,
Lucas Soares Paixão,
Alexandre Magnus Gomes Carvalho
Abstract:
Management of discarded tires is a compelling environmental issue worldwide. Although several approaches have been developed to recycle waste tire rubbers, their application in solid-state cooling is still unexplored. Considering the high barocaloric potential verified for elastomers, the use of waste tire rubber (WTR) as refrigerant in solid-state cooling devices is very promising. Here, we inves…
▽ More
Management of discarded tires is a compelling environmental issue worldwide. Although several approaches have been developed to recycle waste tire rubbers, their application in solid-state cooling is still unexplored. Considering the high barocaloric potential verified for elastomers, the use of waste tire rubber (WTR) as refrigerant in solid-state cooling devices is very promising. Here, we investigated the barocaloric effects in WTR and polymer blends made of vulcanized natural rubber (VNR) and WTR, in order to evaluate its feasibility for solid-state cooling technologies. The adiabatic temperature change and the isothermal entropy change reach giant values, as well as the performance parameters, being comparable or even better than most barocaloric materials in literature. Moreover, pure WTR and WTR-based samples also present a faster thermal exchange than VNR, consisting in an additional advantage of using these discarded materials. Thus, the present findings evidence the encouraging perspectives of employing waste rubbers in solid-state cooling based on barocaloric effect, contributing in both the recycling of polymers and the sustainable energy technology field.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
Investigation of domain wall pinning by square anti-notches and its applications in three terminals MRAM
Authors:
C. I. L. de Araujo,
J. C. S. Gomes,
D. Toscano,
E. L. M. Paixao,
P. Z. Coura,
F. Sato,
D. V. P. Massote,
S. A. Leonel
Abstract:
In this work we perform investigations of the competition between domain-wall pinning and attraction by anti-notches and finite device borders. The conditions for optimal geometries, which can attain a stable domain-wall pinning, are presented. This allow us the proposition of a three-terminals device based on domain-wall pinning. We obtain, with very small pulses of current applied parallel to th…
▽ More
In this work we perform investigations of the competition between domain-wall pinning and attraction by anti-notches and finite device borders. The conditions for optimal geometries, which can attain a stable domain-wall pinning, are presented. This allow us the proposition of a three-terminals device based on domain-wall pinning. We obtain, with very small pulses of current applied parallel to the nanotrack, a fast motion of the domain-wall between anti-notches. In addition to this, a swift stabilization of the pinned domain-wall is observed with a high percentage of orthogonal magnetization, enabling high magnetoresistive signal measurement. Thus, our proposed device is a promising magnetoresistive random access memories with good scalability, duration, and high speed information storage.
△ Less
Submitted 11 May, 2019;
originally announced May 2019.
-
Giant reversible barocaloric effects in Nitrile Butadiene Rubber around room temperature
Authors:
E. O. Usuda,
W. Imamura,
N. M. Bom,
L. S. Paixão,
A. M. G. Carvalho
Abstract:
Elastomers have shown to be promising barocaloric materials, being suitable candidates for solid-state cooling devices. Moreover, this family of polymers presents additional advantages, such as their low cost and long fatigue life. In this context, we investigated the barocaloric effects in Nitrile Butadiene Rubber (NBR) in a large range around room temperature. Moderated applied pressures on NBR…
▽ More
Elastomers have shown to be promising barocaloric materials, being suitable candidates for solid-state cooling devices. Moreover, this family of polymers presents additional advantages, such as their low cost and long fatigue life. In this context, we investigated the barocaloric effects in Nitrile Butadiene Rubber (NBR) in a large range around room temperature. Moderated applied pressures on NBR yield giant temperature change (ΔTS) and entropy change (ΔST), reaching the maximum values of 16.4(2) K at 323 K and 59(6) J kg-1K-1 at 314 K, respectively, for a pressure change of 390 MPa. Besides, both ΔTS and ΔST have shown to be rather reversible. An influence of the glass transition on the barocaloric effects was verified: the glassy state tends to diminish the entropy and temperature changes in comparison with the rubbery state. Furthermore, we calculated the pressure coefficient of glass transition (dTg/dP) obtained from different processes. Our study evidences the potential of NBR for cooling applications based on barocaloric effect, but also points out the glass transition must be avoided for a better barocaloric performance.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.
-
i-Caloric Effects: a proposal for normalization
Authors:
William Imamura,
Lucas S. Paixão,
Érik O. Usuda,
Nicolau M. Bom,
Sergio Gama,
Éder S. N. Lopes,
Alexandre Magnus G. Carvalho
Abstract:
Solid-state cooling based on i-caloric effects is considered the most promising alternative to replace the conventional vapor-compression refrigeration systems. It is possible to define an i-caloric effect as a thermal response registered in a material upon the application of an external field, characterized by an adiabatic temperature change (ΔT_S) or an isothermal entropy change (ΔS_T). Dependin…
▽ More
Solid-state cooling based on i-caloric effects is considered the most promising alternative to replace the conventional vapor-compression refrigeration systems. It is possible to define an i-caloric effect as a thermal response registered in a material upon the application of an external field, characterized by an adiabatic temperature change (ΔT_S) or an isothermal entropy change (ΔS_T). Depending on the nature of the external field (magnetic field, electric field or stress field), the i-caloric effects can be categorized as magnetocaloric effect, electrocaloric effect, and mechanocaloric effect. We can still subdivide mechanocaloric effect in: elastocaloric effect, driven by uniaxial stress; barocaloric effect, driven by isotropic stress (pressure); and torsiocaloric effect, driven by a torque in a prismatic bar, causing a pure shear stress of torsion. The study of i-caloric effects dates from the beginning of 19th century. Nevertheless, due to the independent development of investigations on each effect, there are no stablished standards regarding terminology or results evaluation up to now, making the understanding quite challenging for the community. In this context, we present a proposal for normalization of i-caloric effects, considering different aspects, such as nomenclature, thermodynamics and figures of merit.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Brain Age from the Electroencephalogram of Sleep
Authors:
Haoqi Sun,
Luis Paixao,
Jefferson T. Oliva,
Balaji Goparaju,
Diego Z. Carvalho,
Kicky G. van Leeuwen,
Oluwaseun Akeju,
Robert Joseph Thomas,
Sydney S. Cash,
Matt T. Bianchi,
M. Brandon Westover
Abstract:
The human electroencephalogram (EEG) of sleep undergoes profound changes with age. These changes can be conceptualized as "brain age", which can be compared to an age norm to reflect the deviation from normal aging process. Here, we develop an interpretable machine learning model to predict brain age based on two large sleep EEG datasets: the Massachusetts General Hospital sleep lab dataset (MGH,…
▽ More
The human electroencephalogram (EEG) of sleep undergoes profound changes with age. These changes can be conceptualized as "brain age", which can be compared to an age norm to reflect the deviation from normal aging process. Here, we develop an interpretable machine learning model to predict brain age based on two large sleep EEG datasets: the Massachusetts General Hospital sleep lab dataset (MGH, N = 2,621) covering age 18 to 80; and the Sleep Hearth Health Study (SHHS, N = 3,520) covering age 40 to 80. The model obtains a mean absolute deviation of 8.1 years between brain age and chronological age in the healthy participants in the MGH dataset. As validation, we analyze a subset of SHHS containing longitudinal EEGs 5 years apart, which shows a 5.5 years difference in brain age. Participants with neurological and psychiatric diseases, as well as diabetes and hypertension medications show an older brain age compared to chronological age. The findings raise the prospect of using sleep EEG as a biomarker for healthy brain aging.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Supergiant Barocaloric Effects in Acetoxy Silicone Rubber over a Wide Temperature Range: Great Potential for Solid-state Cooling
Authors:
W. Imamura,
E. O. Usuda,
L. S. Paixão,
N. M. Bom,
A. M. Gomes,
A. M. G. Carvalho
Abstract:
Solid-state cooling based on caloric effects is considered a viable alternative to replace the conventional vapor-compression refrigeration systems. Regarding barocaloric materials, recent results show that elastomers are promising candidates for cooling applications around room-temperature. In the present paper, we report supergiant barocaloric effects observed in acetoxy silicone rubber - a very…
▽ More
Solid-state cooling based on caloric effects is considered a viable alternative to replace the conventional vapor-compression refrigeration systems. Regarding barocaloric materials, recent results show that elastomers are promising candidates for cooling applications around room-temperature. In the present paper, we report supergiant barocaloric effects observed in acetoxy silicone rubber - a very popular, low-cost and environmentally friendly elastomer. Huge values of adiabatic temperature change and reversible isothermal entropy change were obtained upon moderate applied pressures and relatively low strains. These huge barocaloric changes are associated both to the polymer chains rearrangements induced by confined compression and to the first-order structural transition. The results are comparable to the best barocaloric materials reported so far, opening encouraging prospects for the application of elastomers in near future solid-state cooling devices.
△ Less
Submitted 13 August, 2020; v1 submitted 4 October, 2017;
originally announced October 2017.
-
Giant barocaloric effects in natural rubber: A relevant step toward solid-state cooling
Authors:
N. M. Bom,
W. Imamura,
E. O. Usuda,
L. S. Paixão,
A. M. G. Carvalho
Abstract:
Solid-state cooling based on i-caloric effects has shown to be a promising alternative to the conventional refrigeration devices. Only very recently, the research on barocaloric materials is receiving a deal of attention due to the demonstration of giant barocaloric effects in shape-memory alloys. Regarding polymers, there is still a lack of literature, despite their high caloric potential. Thus,…
▽ More
Solid-state cooling based on i-caloric effects has shown to be a promising alternative to the conventional refrigeration devices. Only very recently, the research on barocaloric materials is receiving a deal of attention due to the demonstration of giant barocaloric effects in shape-memory alloys. Regarding polymers, there is still a lack of literature, despite their high caloric potential. Thus, we present here giant barocaloric effects in natural rubber, a low-cost and environmental friendly elastomer polymer. The maximum values of entropy and temperature changes are larger than those previously reported for any promising barocaloric material. Moreover, the huge normalized temperature change and refrigerant capacity exhibited by natural rubber confirm its high potential for cooling applications. We also verify a relevant dependence of the barocaloric effect on the glass transition in natural rubber. Our findings suggest that commercial refrigeration devices based on barocaloric effects from elastomer polymers can be envisaged in the near future.
△ Less
Submitted 20 April, 2018; v1 submitted 30 May, 2017;
originally announced May 2017.