-
Asymmetric Relaxations Through the Lens of Information Geometry
Authors:
Alessandro Bravetti,
Miguel Ángel García Ariza,
Pablo Padilla
Abstract:
We introduce a novel perspective on Newton's Law of Cooling by framing it within the context of information geometry. By characterizing it as a specific representation of a gradient flow, we establish a connection with the well-known Horse-Carrot Theorem and reveal previously unexplored instances of asymmetric relaxations in the context of endoreversible processes. We present a completely general…
▽ More
We introduce a novel perspective on Newton's Law of Cooling by framing it within the context of information geometry. By characterizing it as a specific representation of a gradient flow, we establish a connection with the well-known Horse-Carrot Theorem and reveal previously unexplored instances of asymmetric relaxations in the context of endoreversible processes. We present a completely general and practical criterion for predicting asymmetries based on the Amari-Chentsov tensor, whose applicability extends to both classical and quantum thermodynamics. Illustrative examples include faster cooling down of quantum ideal gases, and relaxations reminiscent of the Mpemba effect in classical ideal gases.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Space-time Metallic Metasurfaces for Frequency Conversion and Beamforming
Authors:
Salvador Moreno-Rodríguez,
Antonio Alex-Amor,
Pablo Padilla,
Juan F. Valenzuela-Valdés,
Carlos Molero
Abstract:
This paper details a class of metal-based space-time metasurfaces for application in wireless communications scenarios. Concretely, we describe space-time metasurfaces that periodically alternate their properties in time between three spatial states: "air", "conductor" and "grating". We analyze the physics of these metastructures via a computationally-efficient analytical technique based on the us…
▽ More
This paper details a class of metal-based space-time metasurfaces for application in wireless communications scenarios. Concretely, we describe space-time metasurfaces that periodically alternate their properties in time between three spatial states: "air", "conductor" and "grating". We analyze the physics of these metastructures via a computationally-efficient analytical technique based on the use of Floquet-Bloch series, integral equations and circuit models. By doing so, we reveal important features of these spatiotemporal metasurfaces: scattering parameters, field profiles, diffraction angles and nature of the space-time harmonics. The results, corroborated with a self-implemented numerical FDTD approach, show the potential application of these space-time metasurfaces as beamformers acting in reflection, in transmission or both. The amplitude and direction of the diffracted orders can be electronically controlled with the paramaters of the metasurface. Moreover, the intrinsic ability of time-modulated diffractive metasurfaces to mix and multiply frequencies is tested. We show how two different modulations can lead to the same diffraction angle but with different mixed output frequencies.
△ Less
Submitted 12 June, 2024; v1 submitted 27 December, 2023;
originally announced December 2023.
-
FR2 5G Networks for Industrial Scenarios: Experimental Characterization and Beam Management Procedures in Operational Conditions
Authors:
Alejandro Ramírez-Arroyo,
Melisa López,
Ignacio Rodríguez,
Troels B. Sørensen,
Samantha Caporal del Barrio,
Pablo Padilla,
Juan F. Valenzuela-Valdés,
Preben Mogensen
Abstract:
Industrial environments constitute a challenge in terms of radio propagation due to the presence of machinery and the mobility of the different agents, especially at mmWave bands. This paper presents an experimental evaluation of a FR2 5G network deployed in an operational factory scenario at 26 GHz. The experimental characterization, performed with autonomous mobile robots that self-navigate the…
▽ More
Industrial environments constitute a challenge in terms of radio propagation due to the presence of machinery and the mobility of the different agents, especially at mmWave bands. This paper presents an experimental evaluation of a FR2 5G network deployed in an operational factory scenario at 26 GHz. The experimental characterization, performed with autonomous mobile robots that self-navigate the industrial lab, leads to the analysis of the received power along the factory and the evaluation of reference path gain models. The proposed assessment deeply analyzes the physical layer of the communication network under operational conditions. Thus, two different network configurations are assessed by measuring the power received in the entire factory, providing a comparison between deployments. Additionally, beam management procedures, such as beam recovery, beam swee** or beam switching, are analyzed since they are crucial in environments where mobile agents are involved. They aim for a zero interruption approach based on reliable communications. The results analysis shows that beam recovery procedures can perform a beam switching to an alternative serving beam with power losses of less than 1.6 dB on average. Beam swee** analysis demonstrates the prevalence of the direct component in Line-of-Sight conditions despite the strong scattering component and large-scale fading in the environment.
△ Less
Submitted 8 May, 2024; v1 submitted 17 August, 2023;
originally announced August 2023.
-
Joint Ultra-wideband Characterization of Azimuth, Elevation and Time of Arrival with Toric Arrays
Authors:
Alejandro Ramírez-Arroyo,
Antonio Alex-Amor,
Rubén Medina,
Pablo Padilla,
Juan F. Valenzuela-Valdés
Abstract:
In this paper, we present an analytical framework for the joint characterization of the 3D direction of arrival (DoA), i.e., azimuth and elevation components, and time of arrival (ToA) in multipath environments. The analytical framework is based on the use of nearly frequency-invariant beamformers (FIB) formed by toric arrays. The frequency response of the toric array is expanded as a series of ph…
▽ More
In this paper, we present an analytical framework for the joint characterization of the 3D direction of arrival (DoA), i.e., azimuth and elevation components, and time of arrival (ToA) in multipath environments. The analytical framework is based on the use of nearly frequency-invariant beamformers (FIB) formed by toric arrays. The frequency response of the toric array is expanded as a series of phase modes, which leads to azimuth-time and elevation-time diagrams from which the 3D DoA and the ToA of the incoming waves can be extracted over a wide bandwidth. Firstly, we discuss some practical considerations, advantages and limitations of using the analytical method. Subsequently, we perform a parametric study to analyze the influence of the method parameters on the quality of the estimation. The method is tested in single-path and multipath mm-wave environments over a large bandwidth. The results show that the proposed method improves the quality of the estimation, i.e., decreases the level of the artifacts, compared to other state-of-art FIB approaches based on the use of single/concentric circular and elliptical arrays.
△ Less
Submitted 24 March, 2024; v1 submitted 24 July, 2023;
originally announced July 2023.
-
Analytical Framework to Model Reconfigurable Metasurfaces including Lumped Elements
Authors:
Mario Pérez-Escribano,
Salvador Moreno-Rodríguez,
Carlos Molero,
Juan F. Valenzuela-Valdés,
Pablo Padilla,
Antonio Alex-Amor
Abstract:
This paper presents an analytical framework, based on Floquet modal expansions of the electromagnetic fields and equivalent circuits, to model reconfigurable metasurfaces loaded with generic lumped elements (resistors, capacitors, inductors, varactors, etc.). The analytical approach is computationally efficient compared to full-wave solvers. Additionally, it works under oblique-incidence condition…
▽ More
This paper presents an analytical framework, based on Floquet modal expansions of the electromagnetic fields and equivalent circuits, to model reconfigurable metasurfaces loaded with generic lumped elements (resistors, capacitors, inductors, varactors, etc.). The analytical approach is computationally efficient compared to full-wave solvers. Additionally, it works under oblique-incidence conditions in a wideband range of frequencies, even far beyond the onset of the first grating lobe (diffraction regime). The analytical framework is validated with some numerical examples in the commercial software CST Studio Suite, demonstrating its potential for analyzing and designing RF and microwave devices, including lumped elements, such as absorbers, polarizers, and reflectarray/transmitarray cells.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Three-Dimensional Fully Metallic Dual Polarization Frequency Selective Surface Design Using Coupled-Resonator Circuit Information
Authors:
Ignacio Parellada-Serrano,
Mario Pérez-Escribano,
Carlos Molero,
Pablo Padilla,
Valentín de la Rubia
Abstract:
This work employs a new approach to analyze coupled-resonator circuits to design and manufacture a fully metallic dual polarization frequency selective surface (FSS). The proposed filtering structure is composed of a series of unit cells with resonators fundamentally coupled along the z-direction and then repeated periodically in the xy-plane. The fully metallic cascaded unit cell is rigorously an…
▽ More
This work employs a new approach to analyze coupled-resonator circuits to design and manufacture a fully metallic dual polarization frequency selective surface (FSS). The proposed filtering structure is composed of a series of unit cells with resonators fundamentally coupled along the z-direction and then repeated periodically in the xy-plane. The fully metallic cascaded unit cell is rigorously analyzed within an infinite periodic environment as a coupled-resonator electromagnetic (EM) circuit. The convenient design of the EM resonators makes it possible to push the evanescent EM field through the metallic structure in the desired frequency band for both polarizations. An FSS prototype is manufactured and measured, and good agreement is found between the simulation results and the final prototype.
△ Less
Submitted 14 July, 2023;
originally announced July 2023.
-
Analytical Equivalent Circuits for Three-dimensional Metamaterials and Metagratings
Authors:
Antonio Alex-Amor,
Salvador Moreno-Rodríguez,
Pablo Padilla,
Juan F. Valenzuela-Valdés,
Carlos Molero
Abstract:
In recent times, three-dimensional (3D) metamaterials have undergone a revolution driven mainly by the popularization of 3D-printing techniques, which has enabled the implementation of modern microwave and photonic devices with advanced functionalities. However, the analysis of 3D metamaterials is complex and computationally costly in comparison to their 1D and 2D counterparts due to the intricate…
▽ More
In recent times, three-dimensional (3D) metamaterials have undergone a revolution driven mainly by the popularization of 3D-printing techniques, which has enabled the implementation of modern microwave and photonic devices with advanced functionalities. However, the analysis of 3D metamaterials is complex and computationally costly in comparison to their 1D and 2D counterparts due to the intricate geometries involved. In this paper, we present a fully-analytical framework based on Floquet-Bloch modal expansions of the electromagnetic fields and integral-equation methods for the analysis of 3D metamaterials and metagratings. Concretely, we focus on 3D configurations formed by periodic arrangements of rectangular waveguides with longitudinal slot insertions. The analytical framework is computationally efficient compared to full-wave solutions and also works under oblique incidence conditions. Furthermore, it comes associated with an equivalent circuit that allows to gain physical insight into the scattering and diffraction phenomena. The analytical equivalent circuit is tested against full-wave simulations in commercial software CST. Simulation results show that the proposed 3D structures provide independent polarization control of the two orthogonal polarizations states. This key property is of potential interest for the production of full-metal polarizers, such as the one illustrated.
△ Less
Submitted 6 October, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Time-periodic Metallic Metamaterials defined by Floquet Circuits
Authors:
Salvador Moreno-Rodríguez,
Antonio Alex-Amor,
Pablo Padilla,
Juan F. Valenzuela-Valdés,
Carlos Molero
Abstract:
In this paper, we study the scattering and diffraction phenomena in time-modulated metamaterials of metallic nature by means of Floquet equivalent circuits. Concretely, we focus on a time-periodic screen that alternates between "metal" and "air" states. We generalize our previous approaches by introducing the concepts of "macroperiod" and "duty cycle" to the time modulation. This allows to analyze…
▽ More
In this paper, we study the scattering and diffraction phenomena in time-modulated metamaterials of metallic nature by means of Floquet equivalent circuits. Concretely, we focus on a time-periodic screen that alternates between "metal" and "air" states. We generalize our previous approaches by introducing the concepts of "macroperiod" and "duty cycle" to the time modulation. This allows to analyze time-periodic metallic metamaterials whose modulation ratios are, in general, rational numbers. Furthermore, with the introduction of the duty cycle, perfect temporal symmetry is broken within the time modulation as the time screen could remain a different amount of time in metal and air states. Previous statements lead to an enrichment of the diffraction phenomenon and to new degrees of freedom that can be exploited in engineering to control the reflection and transmission of electromagnetic waves. Finally, we present some analytical results that are validated with a self-implemented finite-difference time-domain (FDTD) approach. Results show that the scattering level and diffraction angles can be controlled independently by means of the duty cycle and the modulation ratio, respectively. Thus, novel time-based pulsed sources and beamformers can be efficiently designed
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Joint Direction-of-Arrival and Time-of-Arrival Estimation with Ultra-wideband Elliptical Arrays
Authors:
Alejandro Ramírez-Arroyo,
Antonio Alex-Amor,
Pablo Padilla,
Juan F. Valenzuela-Valdés
Abstract:
This paper presents a general technique for the joint Direction-of-Arrival (DoA) and Time-of-Arrival (ToA) estimation in multipath environments. The proposed ultra-wideband technique is based on phase-mode expansions and the use of nearly frequency-invariant elliptical arrays. New possibilities open with the present approach, as not only elliptical, but also circular and linear (highly flattened)…
▽ More
This paper presents a general technique for the joint Direction-of-Arrival (DoA) and Time-of-Arrival (ToA) estimation in multipath environments. The proposed ultra-wideband technique is based on phase-mode expansions and the use of nearly frequency-invariant elliptical arrays. New possibilities open with the present approach, as not only elliptical, but also circular and linear (highly flattened) arrays can be considered with the same implementation. Systematic selection/rejection of signals-of-interest/signals-not-of-interest in smart wireless environments is possible, unlike with previous approaches based on circular arrays. Concentric elliptical arrays of many sizes and eccentricities can be jointly considered, with the subsequent improvement that entails in DoA and ToA detection. This leads to the realization of pseudo-random array patterns; namely, quasi-arbitrary geometries created from the superposition of multiple elliptical arrays. Some simulation and experimental tests (measurements in an anechoic chamber) are carried out for several frequency bands to check the correct performance of the method. The method is proven to give accurate estimations in all tested scenarios, and to be robust against noise and position uncertainty in sensor placement.
△ Less
Submitted 27 April, 2023; v1 submitted 26 July, 2022;
originally announced July 2022.
-
Diffraction Phenomena in Time-varying Metal-based Metasurfaces
Authors:
Antonio Alex-Amor,
Salvador Moreno-Rodriguez,
Pablo Padilla,
Juan F. Valenzuela-Valdes,
Carlos Molero
Abstract:
This paper presents an analytical framework for the analysis of time-varying metal-based metamaterials. Concretely, we particularize the study to time-modulated metal-air interfaces embedded between two different semi-infinite media that are illuminated by monochromatic plane waves of frequency $ω_0$. The formulation is based on a Floquet-Bloch modal expansion, which takes into account the time pe…
▽ More
This paper presents an analytical framework for the analysis of time-varying metal-based metamaterials. Concretely, we particularize the study to time-modulated metal-air interfaces embedded between two different semi-infinite media that are illuminated by monochromatic plane waves of frequency $ω_0$. The formulation is based on a Floquet-Bloch modal expansion, which takes into account the time periodicity of the structure ($T_s = 2π/ ω_s)$, and integral-equation techniques. It allows to extract the reflection/transmission coefficients as well as to derive nontrivial features about the dynamic response and dispersion curves of time-modulated metal-based screens. In addition, the proposed formulation has an associated analytical equivalent circuit that gives physical insight to the diffraction phenomenon. Similarities and differences between space- and time-modulated metamaterials are discussed via the proposed circuit model. Finally, some analytical results are presented to validate the present framework. A good agreement is observed with numerical computations provided by a self-implemented finite-difference time-domain (FDTD) method. Interestingly, the present results suggest that time-modulated metal-based screens can be used as pulsed sources (when $ω_s \ll ω_0$), beamformers ($ω_s \sim ω_0$) to redirect energy in specific regions of space, and analog samplers ($ω_s \gg ω_0$).
△ Less
Submitted 6 April, 2023; v1 submitted 20 June, 2022;
originally announced June 2022.
-
Musical Stylistic Analysis: A Study of Intervallic Transition Graphs via Persistent Homology
Authors:
Martín Mijangos,
Alessandro Bravetti,
Pablo Padilla
Abstract:
Topological data analysis has been recently applied to investigate stylistic signatures and trends in musical compositions. A useful tool in this area is Persistent Homology. In this paper, we develop a novel method to represent a weighted directed graph as a finite metric space and then use persistent homology to extract useful features. We apply this method to weighted directed graphs obtained f…
▽ More
Topological data analysis has been recently applied to investigate stylistic signatures and trends in musical compositions. A useful tool in this area is Persistent Homology. In this paper, we develop a novel method to represent a weighted directed graph as a finite metric space and then use persistent homology to extract useful features. We apply this method to weighted directed graphs obtained from pitch transitions information of a given musical fragment and use these techniques to the study of stylistic trends. In particular, we are interested in using these tools to make quantitative stylistic comparisons. As a first illustration, we analyze a selection of string quartets by Haydn, Mozart and Beethoven and discuss possible implications of our results in terms of different approaches by these composers to stylistic exploration and variety. We observe that Haydn is stylistically the most conservative, followed by Mozart, while Beethoven is the most innovative, expanding and modifying the string quartet as a musical form. Finally we also compare the variability of different genres, namely minuets, allegros, prestos and adagios, by a given composer and conclude that the minuet is the most stable form of the string quartet movements.
△ Less
Submitted 23 April, 2022;
originally announced April 2022.
-
New links between PDE's and Voronoi patterns
Authors:
Yuriria Cortes-Poza,
David Padilla-Garza,
Pablo Padilla
Abstract:
This paper presents a range of results in partial differential equations (PDEs) in which Voronoi patterns arise. We investigate the connection between the solution to an elliptic equation and its probabilistic interpretation as a stochastic colonization game. An agent-based model is designed and implemented to generate the Voronoi cells simulating experimental results with bacteria. We also consid…
▽ More
This paper presents a range of results in partial differential equations (PDEs) in which Voronoi patterns arise. We investigate the connection between the solution to an elliptic equation and its probabilistic interpretation as a stochastic colonization game. An agent-based model is designed and implemented to generate the Voronoi cells simulating experimental results with bacteria. We also consider the analytical solution to the problem, which enables us to define what we call a harmonic Voronoi tessellation. We analyze parabolic equations in Riemannian manifolds, which have important applications in chemical reactions and diffusive fronts. By utilizing short-time heat kernel estimates, we demonstrate that the interaction of $n$ point sources gives rise to a Voronoi tessellation. We recall some well-known results of wavefronts interactions from point light sources and the Huygens principle. We apply results about the particular set of weak solutions to the eikonal equation to characterize Voronoi patterns arising in this context as rectifiable sets. Finally, we present an optimal transport problem and the corresponding Monge-Ampère equation, in which a uniform measure is transported to a sum of $n$ Dirac masses with a cost given by the Euclidean distance. These problems are naturally linked to power sets, a generalization of Voronoi tessellations.
△ Less
Submitted 27 February, 2023; v1 submitted 9 November, 2021;
originally announced November 2021.
-
Cross-polarization Control in FSSs by means of an Equivalent Circuit Approach
Authors:
Carlos Molero,
Antonio Alex-Amor,
Francisco Mesa,
Angel Palomares-Caballero,
Pablo Padilla
Abstract:
This paper presents an efficient equivalent circuit approach (ECA), based on a Floquet modal expansion, for the study of the co- and cross-polarization in frequency selective surfaces (FSS) formed by periodic arrays of patches/apertures in either single or stacked configurations. The ECA makes it possible the derivation of analytical expressions for the generalized scattering parameters associated…
▽ More
This paper presents an efficient equivalent circuit approach (ECA), based on a Floquet modal expansion, for the study of the co- and cross-polarization in frequency selective surfaces (FSS) formed by periodic arrays of patches/apertures in either single or stacked configurations. The ECA makes it possible the derivation of analytical expressions for the generalized scattering parameters associated with the proposed circuit networks. Furthermore, the proposed circuit approach is an efficient surrogate model that can be combined with optimization techniques and artificial intelligence algorithms for the efficient design of FSS structures, saving efforts in the computation compared to time-consuming full-wave simulators and tedious synthesis (simulation-assisted) techniques. Due to the simplicity of the topology of the involved networks, the ECA can also be advantageously used to gain physical insight. The proposed approach is applied and validated in different FSS configurations where the cross-pol component plays a fundamental role in the design, as in circular polarizers, polarization rotators, and reflectarray cells.
△ Less
Submitted 10 July, 2021; v1 submitted 10 May, 2021;
originally announced May 2021.
-
Generalized Director Approach for Liquid-Crystal-Based Reconfigurable RF Devices
Authors:
Antonio Alex-Amor,
Angel Palomares-Caballero,
Antonio Palomares,
Adrian Tamayo-Dominguez,
Jose M. Fernandez-Gonzalez,
Pablo Padilla
Abstract:
This letter presents a closed-form integral-equation formulation that models the director tilting in nematic liquid crystals. The proposed formulation is computationally efficient compared to numerical methods and provides a physical insight on the matter. Our previous work is generalized from the one-constant approach to all the possible cases that cover the elastic constants. These constants det…
▽ More
This letter presents a closed-form integral-equation formulation that models the director tilting in nematic liquid crystals. The proposed formulation is computationally efficient compared to numerical methods and provides a physical insight on the matter. Our previous work is generalized from the one-constant approach to all the possible cases that cover the elastic constants. These constants determine in great extent the electrical properties of the liquid crystal, and subsequently, the response of the reconfigurable devices that take use of it. Therefore, a more precise but still simple modeling of their influence is pursued here. Simulations show good agreement with numerical implementations. In comparison, the error in the estimation is considerably reduced when using the integral-equation formulation, specially as the polarization voltage or the dielectric anisotropy decreases.
△ Less
Submitted 26 April, 2021;
originally announced May 2021.
-
Dispersion and Filtering Properties of Rectangular Waveguides Loaded With Holey Structures
Authors:
Ángel Palomares-Caballero,
Antonio Alex-Amor,
Pablo Padilla,
Juan F. Valenzuela-Valdés
Abstract:
This paper analyzes thoroughly the dispersion and filtering features of periodic holey waveguides in the millimeter-wave frequency range. Two structures are mainly studied depending on the glide and mirror symmetries of the holes. A parametric study of the dispersion characteristics of their unit cells is carried out. Glide-symmetric holey waveguides provide a higher propagation constant and a low…
▽ More
This paper analyzes thoroughly the dispersion and filtering features of periodic holey waveguides in the millimeter-wave frequency range. Two structures are mainly studied depending on the glide and mirror symmetries of the holes. A parametric study of the dispersion characteristics of their unit cells is carried out. Glide-symmetric holey waveguides provide a higher propagation constant and a low dispersion over a wide frequency range regarding hollow waveguides. This property is particularly useful for the design of low-loss and low-dispersive phase shifters. We also demonstrate that glide-symmetric holey waveguides are less dispersive than waveguides loaded with glide-symmetric pins. Furthermore, we perform a Bloch analysis to compute the attenuation constants in holey waveguides with mirror and broken glide symmetries. Both configurations are demonstrated to be suitable for filter design. Finally, the simulation results are validated with two prototypes in gap-waveguide technology. The first one is a 180$^{o}$ phase shifter based on a glide-symmetric holey configuration that achieves a flat phase shift response over a wide frequency range (27.5\% frequency bandwidth). The second one is a filter based on a mirror-symmetric holey structure with 20-dB rejection from 63 GHz to 75 GHz.
△ Less
Submitted 2 January, 2021;
originally announced January 2021.
-
Glide-Symmetric Metallic Structures with Elliptical Holes for Lens Compression
Authors:
Antonio Alex-Amor,
Fatemeh Ghasemifard,
Guido Valerio,
Mahsa Ebrahimpouri,
Pablo Padilla,
José M. Fernández-González,
Oscar Quevedo-Teruel
Abstract:
In this paper, we study the wave propagation in a metallic parallel-plate structure with glide-symmetric elliptical holes. To perform this study, we derived a mode-matching technique based on the generalized Floquet theorem for glide-symmetric structures. This mode-matching technique benefits from a lower computational cost since it takes advantage of the glide symmetry in the structure. It also p…
▽ More
In this paper, we study the wave propagation in a metallic parallel-plate structure with glide-symmetric elliptical holes. To perform this study, we derived a mode-matching technique based on the generalized Floquet theorem for glide-symmetric structures. This mode-matching technique benefits from a lower computational cost since it takes advantage of the glide symmetry in the structure. It also provides physical insight on the specific properties of Floquet modes propagating in these specific structures. With our analysis, we demonstrate that glide-symmetric structures with periodic elliptical holes exhibit an anisotropic refractive index over a wide range of frequencies. The equivalent refractive index can be controlled by tuning the dimensions of the holes. Finally, by combining the anisotropy related to the elliptical holes and transformation optics, a Maxwell fish-eye lens with a 33.33% size compression is designed. This lens operates in a wideband frequency range from 2.5 GHz to 10 GHz.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
MARVEL, a four-telescope array for high-precision radial-velocity monitoring
Authors:
Gert Raskin,
Christian Schwab,
Bart Vandenbussche,
Joris De Ridder,
Cyprien Lanthermann,
Jesus Pérez Padilla,
Andrew Tkachenko,
Hugues Sana,
Pierre Royer,
Saskia Prins,
Leen Decin,
Denis Defrère,
Jacob Pember,
David Atkinson,
Alistair Glasse,
Don Pollacco,
Giovanna Tinetti,
Manuel Güdel,
Julian Stürmer,
Ignasi Ribas,
Alexis Brandeker,
Lars Buchhave,
Samuel Halverson,
Gerardo Avila,
Johan Morren
, et al. (1 additional authors not shown)
Abstract:
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the…
▽ More
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Extending Friedmann equations using fractional derivatives using a Last Step Modification technique: the case of a matter dominated accelerated expanding Universe
Authors:
E. Barrientos,
S. Mendoza,
P. Padilla
Abstract:
We present a toy model for extending the Friedmann equations of relativistic cosmology using fractional derivatives. We do this by replacing the integer derivatives, in a few well-known cosmological results with fractional derivatives leaving their order as a free parameter. All this with the intention to explain the current observed acceleration of the Universe. We apply the Last Step Modificatio…
▽ More
We present a toy model for extending the Friedmann equations of relativistic cosmology using fractional derivatives. We do this by replacing the integer derivatives, in a few well-known cosmological results with fractional derivatives leaving their order as a free parameter. All this with the intention to explain the current observed acceleration of the Universe. We apply the Last Step Modification technique of fractional calculus to construct some useful fractional equations of cosmology. The fits of the unknown fractional derivative order and the fractional cosmographic parameters to SN Ia data shows that this simple construction can explain the current accelerated expansion of the Universe without the use of a dark energy component with a MOND-like behaviour using Milgrom's acceleration constant which sheds light into to the non-necessity of a dark matter component as well.
△ Less
Submitted 14 January, 2021; v1 submitted 6 December, 2020;
originally announced December 2020.
-
Exploring the Potentials of the Multi-modal Equivalent Circuit Approach for Stacks of 2-D Aperture Arrays
Authors:
Antonio Alex-Amor,
Francisco Mesa,
Ángel Palomares-Caballero,
Carlos Molero,
Pablo Padilla
Abstract:
Many frequency selective surface (FSS) structures are based on the use of a single periodic array of slot/apertures in a conducting sheet embedded in a layered medium. However, it is well known that stacking several conducting sheets and breaking the alignment of the stack can bring multiple benefits to the structure. In this paper, the analysis and design of stacks of 2-D aperture arrays are carr…
▽ More
Many frequency selective surface (FSS) structures are based on the use of a single periodic array of slot/apertures in a conducting sheet embedded in a layered medium. However, it is well known that stacking several conducting sheets and breaking the alignment of the stack can bring multiple benefits to the structure. In this paper, the analysis and design of stacks of 2-D aperture arrays are carried out by exploiting as much as possible all the potentialities of a rigorous and systematic formulation based on the multi-modal equivalent circuit approach (ECA). A key feature of the formulation is that linear transformations between the apertures of adjacent plates (rotation, translation, and scaling) can be dealt with from a purely analytical perspective. This fact is of potential interest for many practical applications, such as the design of polarization converters, absorbers, filters, and thin matching layers. When the apertures have an arbitrary geometry, it can be applied a hybrid approach that combines the ability of commercial simulators to handle arbitrary geometries with the fast computation times and physical insight of the ECA. In general, either the purely analytical or the hybrid approach can be applied in those many practical scenarios where the spatial profile of the electric field on the considered apertures hardly changes with frequency. As an additional feature of the approach, the dispersion properties (phase/attenuation constants and Bloch impedance) of infinite periodic stacks can be derived and, in particular, analytical expressions for mirror- and glide-symmetric configurations are provided.
△ Less
Submitted 12 April, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Dispersion Analysis of Periodic Structures in Anisotropic Media: Application to Liquid Crystals
Authors:
Antonio Alex-Amor,
Angel Palomares-Caballero,
Francisco Mesa,
Oscar Quevedo-Teruel,
Pablo Padilla
Abstract:
This paper presents an efficient method to compute the dispersion diagram of periodic and uniform structures with generic anisotropic media. The method takes advantage of the ability of full-wave commercial simulators to deal with finite structures having anisotropic media. In particular, the proposed method extends the possibilities of commercial eigenmode solvers in the following ways: (i) aniso…
▽ More
This paper presents an efficient method to compute the dispersion diagram of periodic and uniform structures with generic anisotropic media. The method takes advantage of the ability of full-wave commercial simulators to deal with finite structures having anisotropic media. In particular, the proposed method extends the possibilities of commercial eigenmode solvers in the following ways: (i) anisotropic materials with non-diagonal permittivity and permeability tensors can be analyzed; (ii) the attenuation constant can easily be computed in both propagating and stopband regions and lossy materials can be included in the simulation; and (iii) unbounded and radiating structures such as leaky-wave antennas can be treated. The latter feature may be considered the most remarkable, since the structures must be forcefully bounded with electric/magnetic walls in the eigensolvers of most commercial simulators. In this work, the proposed method is particularized for the study of liquid crystals (LCs) in microwave and antenna devices. Thus, the dispersion properties of a great variety of LC-based configurations are analyzed, from canonical structures, such as waveguide and microstrip, to complex reconfigurable phase shifters in ridge gap-waveguide technology and leaky-wave antennas. Our results have been validated with previously reported works in the literature and with commercial software CST and HFSS.
△ Less
Submitted 1 October, 2021; v1 submitted 15 July, 2020;
originally announced July 2020.
-
Reverse Janssen effect in narrow granular columns
Authors:
Shivam Mahajan,
Michael Tennenbaum,
Sudhir N. Pathak,
Devontae Baxter,
Xiaochen Fan,
Pablo Padilla,
Caleb Anderson,
Alberto Fernandez-Nieves,
Massimo Pica Ciamarra
Abstract:
When grains are added to a cylinder, the weight at the bottom is smaller than the total weight of the column, which is partially supported by the lateral walls through wall/grain frictional forces. This is known as the Janssen effect. Via a combined experimental and numerical investigation, here we demonstrate a reverse Jansen effect whereby the fraction of the weight supported by the base overcom…
▽ More
When grains are added to a cylinder, the weight at the bottom is smaller than the total weight of the column, which is partially supported by the lateral walls through wall/grain frictional forces. This is known as the Janssen effect. Via a combined experimental and numerical investigation, here we demonstrate a reverse Jansen effect whereby the fraction of the weight supported by the base overcomes one. We characterize the dependence of this phenomenon on the various control parameters involved, rationalize the physical process responsible for the emergence of the compressional frictional forces responsible for the anomaly, and introduce a model to reproduce our findings. Contrary to prior assumptions, our results demonstrate that the constitutive relation on a material element can depend on the applied stress.
△ Less
Submitted 29 May, 2020;
originally announced May 2020.
-
Low-Loss Reconfigurable Phase Shifter in Gap-Waveguide Technology for mm-Wave Applications
Authors:
Á. Palomares-Caballero,
A. Alex-Amor,
P. Escobedo,
J. Valenzuela-Valdés,
P. Padilla
Abstract:
In this brief, we present a low-loss mechanically reconfigurable phase shifter implemented in gap-waveguide technology for mm-wave frequencies. The proposed design gives a practical implementation of tuning elements inside the waveguide providing alternatives to the use of the E-plane split waveguide at high frequencies in order to avoid leakage losses. The depicted phase shifter design is based o…
▽ More
In this brief, we present a low-loss mechanically reconfigurable phase shifter implemented in gap-waveguide technology for mm-wave frequencies. The proposed design gives a practical implementation of tuning elements inside the waveguide providing alternatives to the use of the E-plane split waveguide at high frequencies in order to avoid leakage losses. The depicted phase shifter design is based on a H-plane split waveguide. The phase shift is controlled by means of a tuning screw, which exerts pressure on a flexible metallic strip inserted inside the waveguide. The flexible strip bends with different curvature radii and determines the phase shift at the output port. Cost-effective manufacturing and simple implementation of the flexible metallic strip are achieved by means of the gap-waveguide design. A prototype has been manufactured for validation purposes. Good impedance matching is achieved from 64 GHz to 75 GHz providing a 15.8% impedance bandwidth. The results show a maximum phase shift of 250$^{o}$ with a maximum and mean insertion loss (IL) of 3 dB and 1.7 dB, respectively.
△ Less
Submitted 5 January, 2021; v1 submitted 19 March, 2020;
originally announced March 2020.
-
Thermodynamics and evolutionary biology through optimal control
Authors:
Alessandro Bravetti,
Pablo Padilla
Abstract:
We consider a particular instance of the lift of controlled systems recently proposed in the theory of irreversible thermodynamics and show that it leads to a variational principle for an optimal control in the sense of Pontryagin. Then we focus on two important applications: in thermodynamics and in evolutionary biology. In the thermodynamic context, we show that this principle provides a dynamic…
▽ More
We consider a particular instance of the lift of controlled systems recently proposed in the theory of irreversible thermodynamics and show that it leads to a variational principle for an optimal control in the sense of Pontryagin. Then we focus on two important applications: in thermodynamics and in evolutionary biology. In the thermodynamic context, we show that this principle provides a dynamical implementation of the Second Law, which stabilizes the equilibrium manifold of a system. In the evolutionary context, we discuss several interesting features: it provides a robust scheme for the coevolution of the population and its fitness landscape; it has a clear informational interpretation; it recovers Price equation naturally; and finally, it extends standard evolutionary dynamics to include phenomena such as the emergence of cooperation and the coexistence of qualitatively different phases of evolution, which we speculate can be associated with Darwinism and punctuated equilibria.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Continuous Choreographies as Limiting Solutions of $N$-body Type Problems with Weak Interaction
Authors:
Reynaldo Castaneira,
Pablo Padilla,
Héctor Sánchez-Morgado
Abstract:
We consider the limit $N\to +\infty$ of $N$-body type problems with weak interaction, equal masses and $-σ$-homogeneous potential, $0<σ<1$. We obtain the integro-differential equation that the motions must satisfy, with limit choreographic solutions corresponding to travelling waves of this equation. Such equation is the Euler-Lagrange equation of a corresponding limiting action functional. Our ma…
▽ More
We consider the limit $N\to +\infty$ of $N$-body type problems with weak interaction, equal masses and $-σ$-homogeneous potential, $0<σ<1$. We obtain the integro-differential equation that the motions must satisfy, with limit choreographic solutions corresponding to travelling waves of this equation. Such equation is the Euler-Lagrange equation of a corresponding limiting action functional. Our main result is that the circle is the absolute minimizer of the action functional among zero mean (travelling wave) loops of class $H^1$.
△ Less
Submitted 31 October, 2016; v1 submitted 20 October, 2015;
originally announced October 2015.
-
Measuring social complexity and the emergence of cooperation from entropic principles
Authors:
O. López-Corona,
P. Padilla,
A. Huerta,
D. Mustri-Trejo,
K. Perez,
A. Ruiz,
O. Valdés,
F. Zamudio
Abstract:
Assessing quantitatively the state and dynamics of a social system is a very difficult problem. It is of great importance for both practical and theoretical reasons such as establishing the efficiency of social action programs, detecting possible community needs or allocating resources. In this paper we propose a new general theoretical framework for the study of social complexity, based on the re…
▽ More
Assessing quantitatively the state and dynamics of a social system is a very difficult problem. It is of great importance for both practical and theoretical reasons such as establishing the efficiency of social action programs, detecting possible community needs or allocating resources. In this paper we propose a new general theoretical framework for the study of social complexity, based on the relation of complexity and entropy in combination with evolutionary dynamics to asses the dynamics of the system. Imposing the second law of thermodynamics, we study the conditions under which cooperation emerges and demonstrate that it depends of relative importance of local and global fitness. As cooperation is a central concept in sustainability, this thermodynamic-informational approach allows new insights and means to asses it using the concept of Helmholtz free energy. Finally we introduce a new set of equations that consider the more general case where the social system change both in time and space, and relate our findings to sustainability.
△ Less
Submitted 28 January, 2016; v1 submitted 19 February, 2015;
originally announced February 2015.
-
Complex groundwater flow systems as traveling agent models
Authors:
Oliver López-Corona,
Pablo Padilla,
Oscar Escolero,
Tomás González,
Eric Morales-Casique
Abstract:
Analyzing field data from pum** tests, we show that as with many other natural phenomena, groundwater flow exhibits a complex dynamics described by 1/f power spectrum. This result is theoretically studied within an agent perspective. Using a traveling agent model, we prove that this statistical behavior emerges when the medium is complex. Some heuristic reasoning is provided to justify both spat…
▽ More
Analyzing field data from pum** tests, we show that as with many other natural phenomena, groundwater flow exhibits a complex dynamics described by 1/f power spectrum. This result is theoretically studied within an agent perspective. Using a traveling agent model, we prove that this statistical behavior emerges when the medium is complex. Some heuristic reasoning is provided to justify both spatial and dynamic complexity, as the result of the superposition of an infinite number of stochastic processes. Even more, we show that this implies that non-Kolmogorovian probability is needed for its study, and provide a set of new partial differential equations for groundwater flow.
△ Less
Submitted 2 May, 2014;
originally announced May 2014.
-
Large Frame-Transfer Detectors for the MAIA Imager
Authors:
Jesús Pérez Padilla,
Simon Tulloch,
Gert Raskin,
Saskia Prins,
Florian Merges,
Wim Pessemier,
Steven Bloemen
Abstract:
MAIA, the Mercator Advanced Imager for Asteroseismology, is a new fast-cadence 3-channel photometric instrument. It is installed on the 1.2-m Mercator telescope at the Roque de Los Muchachos Observatory in La Palma, Spain. MAIA comprises 3 cameras that simultaneously observe the same 9.4 x 14.1 arcmin field in 3 different colour bands (u, g and r). Each camera is based on a very large frame-transf…
▽ More
MAIA, the Mercator Advanced Imager for Asteroseismology, is a new fast-cadence 3-channel photometric instrument. It is installed on the 1.2-m Mercator telescope at the Roque de Los Muchachos Observatory in La Palma, Spain. MAIA comprises 3 cameras that simultaneously observe the same 9.4 x 14.1 arcmin field in 3 different colour bands (u, g and r). Each camera is based on a very large frame-transfer detector (CCD42-C0) of 2kx6k pixels, specially designed for rapid time-series photometry. These CCDs were originally developed by e2v for ESA's cancelled Eddington space mission and are now on permanent loan to the Institute of Astronomy of the KU Leuven, Belgium. The acquisition system of MAIA uses a single ARC GEN-III controller, custom programmed to allow differing exposure times for each of the three CCDs. Predefined sequences synchronize each read-out with the shortest integration time. Detectors that are not read-out at the end of an exposure continue integrating and can be read-out in one of the subsequent cycles. This read method takes full advantage of the frame-transfer functionality of the CCD42-C0 detectors and allows optimisation of the exposure times for each wavelength band. This then gives a similar exposure depth in each of the 3 arms despite the fact that the UV channel typically sees much less flux. We present the CCD42-C0 detectors, their characterisation, including a thorough analysis of their non-linearity, and the MAIA data-acquisition system.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Compact Stirling cooling of astronomical detectors
Authors:
Gert Raskin,
Johan Morren,
Wim Pessemier,
Jesus Perez Padilla,
Jeroen Vandersteen
Abstract:
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cry…
▽ More
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the MAIA detectors. Finally, compact free-piston Stirling coolers were selected, namely the CryoTel MT cryo-coolers from SUNPOWER, that can extract 5W of heat at a temperature of 77K. In this contribution we give details of the MAIA detector cooling solution. We also discuss the general usability of this type of closed-cycle cryo-coolers for astronomical detectors. They offer distinct advantages but the vibrations caused by mechanical cryo-cooling impose a serious drawback. We present a solution to mechanically decouple the coolers from the instrument and show some results of how this reduces the vibrations to a level that is acceptable for most applications on astronomical telescopes.
△ Less
Submitted 4 November, 2013;
originally announced November 2013.
-
MAIA, a three-channel imager for asteroseismology: instrument design
Authors:
Gert Raskin,
Steven Bloemen,
Johan Morren,
Jesus Perez Padilla,
Saskia Prins,
Wim Pessemier,
Jeroen Vandersteen,
Florian Merges,
Roy Østensen,
Hans Van Winckel,
Conny Aerts
Abstract:
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These de…
▽ More
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These detectors were developed for ESA's cancelled Eddington space mission and were offered on permanent loan to the Institute of Astronomy (KU Leuven, Belgium). MAIA uses its own ugr photometric system that is a crude approximation of the SDSS system. The instrument is designed to perform multi-colour observations for asteroseismology, with specific emphasis on subdwarf and white dwarf single and binary stars. We describe the design of the instrument, discuss key components, and report on its performance and first results.
△ Less
Submitted 8 October, 2013;
originally announced October 2013.
-
A Selection Criterion for Patterns in Reaction-Diffusion Systems
Authors:
Tatiana T. Marquez-Lago,
Pablo Padilla
Abstract:
Alan Turing's work in Morphogenesis has received wide attention during the past 60 years. The central idea behind his theory is that two chemically interacting diffusible substances are able to generate stable spatial patterns, provided certain conditions are met. Turing's proposal has already been confirmed as a pattern formation mechanism in several chemical and biological systems and, due to th…
▽ More
Alan Turing's work in Morphogenesis has received wide attention during the past 60 years. The central idea behind his theory is that two chemically interacting diffusible substances are able to generate stable spatial patterns, provided certain conditions are met. Turing's proposal has already been confirmed as a pattern formation mechanism in several chemical and biological systems and, due to their wide applicability, there is a great deal of interest in deciphering how to generate specific patterns under controlled conditions. However, techniques allowing one to predict what kind of spatial structure will emerge from Turing systems, as well as generalized reaction-diffusion systems, remain unknown. Here, we consider a generalized reaction diffusion system on a planar domain and provide an analytic criterion to determine whether spots or stripes will be formed. It is motivated by the existence of an associated energy function that allows bringing in the intuition provided by phase transitions phenomena. This criterion is proved rigorously in some situations, generalizing well known results for the scalar equation where the pattern selection process can be understood in terms of a potential. In more complex settings it is investigated numerically. Our criterion can be applied to efficiently design Biotechnology and Developmental Biology experiments, or simplify the analysis of hypothesized morphogenetic models.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
HERMES: a high-resolution fibre-fed spectrograph for the Mercator telescope
Authors:
Gert Raskin,
Hans Van Winckel,
Herman Hensberge,
Alain Jorissen,
Holger Lehmann,
Christoffel Waelkens,
Gerardo Avila,
Jean-Pierre De Cuyper,
Pieter Degroote,
Rene Dubosson,
Louis Dumortier,
Yves Fremat,
Uwe Laux,
Bernard Michaud,
Johan Morren,
Jesus Perez Padilla,
Wim Pessemier,
Saskia Prins,
Kristof Smolders,
Sophie Van Eck,
Johannes Winkler
Abstract:
The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procure…
▽ More
The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procurement details, the telescope adaptor and calibration unit, the detector system, as well as the optimised data-reduction pipeline. We present a detailed performance analysis to show that the spectrograph performs as specified both in optical quality and in total efficiency. With a spectral resolution of 85000 (63000 for the low-resolution fibre), a spectral coverage from 377 to 900nm in a single exposure and a peak efficiency of 28%, HERMES proves to be an ideal instrument for building up time series of high-quality data of variable (stellar) phenomena.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Quantum Collapse of a Small Dust Shell
Authors:
A. Corichi,
G. Cruz,
A. Minzoni,
P. Padilla,
M Rosenbaum,
M. P. Ryan,
N. F. Smyth,
T. Vukasinac
Abstract:
The full quantum mechanical collapse of a small relativistic dust shell is studied analytically, asymptotically and numerically starting from the exact finite dimensional classical reduced Hamiltonian recently derived by Háj{\'ı}ček and Kuchař. The formulation of the quantum mechanics encounters two problems. The first is the multivalued nature of the Hamiltonian and the second is the constructi…
▽ More
The full quantum mechanical collapse of a small relativistic dust shell is studied analytically, asymptotically and numerically starting from the exact finite dimensional classical reduced Hamiltonian recently derived by Háj{\'ı}ček and Kuchař. The formulation of the quantum mechanics encounters two problems. The first is the multivalued nature of the Hamiltonian and the second is the construction of an appropriate self adjoint momentum operator in the space of the shell motion which is confined to a half line. The first problem is solved by identifying and neglecting orbits of small action in order to obtain a single valued Hamiltonian. The second problem is solved by introducing an appropriate lapse function. The resulting quantum mechanics is then studied by means of analytical and numerical techniques. We find that the region of total collapse has very small probability. We also find that the solution concentrates around the classical Schwarzschild radius. The present work obtains from first principles a quantum mechanics for the shell and provides numerical solutions, whose behavior is explained by a detailed WKB analysis for a wide class of collapsing shells.
△ Less
Submitted 17 September, 2001;
originally announced September 2001.
-
The Effect of low Momentum Quantum Fluctuations on a Coherent Field Structure
Authors:
A. Corichi,
G. Cruz-Pacheco,
A. Minzoni,
P. Padilla,
M. Rosenbaum,
M. P. Ryan,
N. F. Smyth
Abstract:
In the present work the evolution of a coherent field structure of the Sine-Gordon equation under quantum fluctuations is studied. The basic equations are derived from the coherent state approximation to the functional Schrödinger equation for the field. These equations are solved asymptotically and numerically for three physical situations. The first is the study of the nonlinear mechanism resp…
▽ More
In the present work the evolution of a coherent field structure of the Sine-Gordon equation under quantum fluctuations is studied. The basic equations are derived from the coherent state approximation to the functional Schrödinger equation for the field. These equations are solved asymptotically and numerically for three physical situations. The first is the study of the nonlinear mechanism responsible for the quantum stability of the soliton in the presence of low momentum fluctuations. The second considers the scattering of a wave by the Soliton. Finally the third problem considered is the collision of Solitons and the stability of a breather.
It is shown that the complete integrability of the Sine-Gordon equation precludes fusion and splitting processes in this simplified model.
The approximate results obtained are non-perturbative in nature, and are valid for the full nonlinear interaction in the limit of low momentum fluctuations. It is also found that these approximate results are in good agreement with full numerical solutions of the governing equations. This suggests that a similar approach could be used for the baby Skyrme model, which is not completely integrable. In this case the higher space dimensionality and the internal degrees of freedom which prevent the integrability will be responsable for fusion and splitting processes. This work provides a starting point in the numerical solution of the full quantum problem of the interaction of the field with a fluctuation.
△ Less
Submitted 16 February, 2000; v1 submitted 9 April, 1999;
originally announced April 1999.
