-
A Weitzenböck formula on Sasakian holomorphic bundles
Authors:
Luis E. Portilla P.,
Eric Loubeau,
Henrique N. Sá Earp
Abstract:
This work seeks to advance the understanding of the smooth structure of the moduli space of self-dual contact instantons (SDCI) on Sasakian 7-manifolds M. A neighborhood of a smooth point of M is locally modeled on the first cohomological group of an elliptic complex (1.4). There is a cohomological obstruction to the smoothness for the moduli space, in terms of a second basic cohomological group,…
▽ More
This work seeks to advance the understanding of the smooth structure of the moduli space of self-dual contact instantons (SDCI) on Sasakian 7-manifolds M. A neighborhood of a smooth point of M is locally modeled on the first cohomological group of an elliptic complex (1.4). There is a cohomological obstruction to the smoothness for the moduli space, in terms of a second basic cohomological group, in this paper we study conditions under which this obstruction disappears, by computing a Weitzenböck formula and using a Bochner-type method to obtain a vanishing theorem. Given an SDCI on a Sasakian bundle E, we find sufficient conditions for the vanishing of the obstruction in the positivity of a couple of operators R and F depending on the curvatures of the connection and the Riemann curvature of the Sasakian metric g. In particular, we find that if M is transversely Ricci positive and F positive, the moduli space of SDCI must be smooth. However, in general, the operator F is not positive definite and we describe bundles over the Stiefel manifold for which it is the case. Finally, we show that when the energy of the curvature is less than the first non-zero eigenvalue of RicT the obstruction vanishes.
△ Less
Submitted 22 April, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
The CALOCUBE project for a space based cosmic ray experiment: design, construction, and first performance of a high granularity calorimeter prototype
Authors:
Adriani O.,
Albergo S.,
Auditore L.,
Basti A.,
Berti E.,
Bigongiari G.,
Bonechi L.,
Bongi M.,
Bonvicini V.,
Bottai S.,
Brogi P.,
Cappello G.,
Carotenuto G.,
Castellini G.,
Cattaneo P. W.,
Cecchi R.,
Checchia C.,
D'Alessandro R.,
Detti S.,
Fasoli M.,
Finetti N.,
Italiano A.,
Lenzi P.,
Maestro P.,
Manetti M.
, et al. (26 additional authors not shown)
Abstract:
Current research in High Energy Cosmic Ray Physics touches on fundamental questions regarding the origin of cosmic rays, their composition, the acceleration mechanisms, and their production. Unambiguous measurements of the energy spectra and of the composition of cosmic rays at the "knee" region could provide some of the answers to the above questions. So far only ground based observations, which…
▽ More
Current research in High Energy Cosmic Ray Physics touches on fundamental questions regarding the origin of cosmic rays, their composition, the acceleration mechanisms, and their production. Unambiguous measurements of the energy spectra and of the composition of cosmic rays at the "knee" region could provide some of the answers to the above questions. So far only ground based observations, which rely on sophisticated models describing high energy interactions in the earth's atmosphere, have been possible due to the extremely low particle rates at these energies. A calorimetry based space experiment that could provide not only flux measurements but also energy spectra and particle identification, would certainly overcome some of the uncertainties of ground based experiments. Given the expected particle fluxes, a very large acceptance is needed to collect a sufficient quantity of data, in a time compatible with the duration of a space mission. This in turn, contrasts with the lightness and compactness requirements for space based experiments. We present a novel idea in calorimetry which addresses these issues whilst limiting the mass and volume of the detector. In this paper we report on a four year R&D program where we investigated materials, coatings, photo-sensors, Front End electronics, and mechanical structures with the aim of designing a high performance, high granularity calorimeter with the largest possible acceptance. Details are given of the design choices, component characterisation, and of the construction of a sizeable prototype (Calocube) which has been used in various tests with particle beams.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
NAOMI: the adaptive optics system of the Auxiliary Telescopes of the VLTI
Authors:
Woillez J.,
Abad J. A.,
Abuter R.,
Aller Carpentier E.,
Alonso J.,
Andolfato L.,
Barriga P.,
Berger J. -P.,
Beuzit J. -L.,
Bonnet H.,
Bourdarot G.,
Bourget P.,
Brast R.,
Caniguante L.,
Cottalorda E.,
Darré P.,
Delabre B.,
Delboulbé A.,
Delplancke-Ströbele F.,
Dembet R.,
Donaldson R.,
Dorn R.,
Dupeyron J.,
Dupuy C.,
Egner S.
, et al. (58 additional authors not shown)
Abstract:
The tip-tilt stabilisation system of the 1.8 m Auxiliary Telescopes of the Very Large Telescope Interferometer was never dimensioned for robust fringe tracking, except when atmospheric seeing conditions are excellent. Increasing the level of wavefront correction at the telescopes is expected to improve the coupling into the single-mode fibres of the instruments, and enable robust fringe tracking e…
▽ More
The tip-tilt stabilisation system of the 1.8 m Auxiliary Telescopes of the Very Large Telescope Interferometer was never dimensioned for robust fringe tracking, except when atmospheric seeing conditions are excellent. Increasing the level of wavefront correction at the telescopes is expected to improve the coupling into the single-mode fibres of the instruments, and enable robust fringe tracking even in degraded conditions. We deployed a new adaptive optics module for interferometry (NAOMI) on the Auxiliary Telescopes. We present its design, performance, and effect on the observations that are carried out with the interferometric instruments.
△ Less
Submitted 19 August, 2019;
originally announced August 2019.
-
Steps towards the hyperfine splitting measurement of the muonic hydrogen ground state: pulsed muon beam and detection system characterization
Authors:
A. Adamczak,
G. Baccolo,
D. Bakalov,
G. Baldazzi,
R. Bertoni,
M. Bonesini,
V. Bonvicini,
R. Campana,
R. Carbone,
T. Cervi,
F. Chignoli,
M. Clemenza,
L. Colace,
A. Curioni,
M. Danailov,
P. Danev,
I. D'Antone,
A. De,
C. De,
M. De,
M. Furini,
F. Fuschino,
K. Gadejisso-Tossou,
D. Guffanti,
A. Iaciofano
, et al. (30 additional authors not shown)
Abstract:
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the…
▽ More
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the test were the characterization of the target, the hodoscope and the X-ray detectors. The apparatus consisted of a beam hodoscope and X-rays detectors made with high purity Germanium and Lanthanum Bromide crystals. In this paper the experimental setup is described and the results of the detector characterization are presented.
△ Less
Submitted 21 June, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
In situ ore formation experiment: Amino acids and amino sugars trapped in artificial chimneys on deep-sea hydrothermal systems at Suiyo Seamount, Izu-Bonin Arc, Pacific Ocean
Authors:
Takano,
Y.,
Marumo,
K.,
Ebashi,
T.,
Gupta,
L. P.,
Kawahata,
H.,
Kobayashi,
K.,
Yamagishi,
A.,
Kuwabara,
T
Abstract:
The present study reports on the bio-organic composition of a deep-sea venting hydrothermal system originating from arc volcanism; the origin of the particulates in hydrothermal fluids from the Suiyo Seamount in the southern Izu-Bonin (Ogasawara) Arc is discussed with regard to amino compounds. Chimney samples on deep-sea hydrothermal systems and core samples at Suiyo Seamount were determined for…
▽ More
The present study reports on the bio-organic composition of a deep-sea venting hydrothermal system originating from arc volcanism; the origin of the particulates in hydrothermal fluids from the Suiyo Seamount in the southern Izu-Bonin (Ogasawara) Arc is discussed with regard to amino compounds. Chimney samples on deep-sea hydrothermal systems and core samples at Suiyo Seamount were determined for amino acids, and occasionally amino sugars. Two types of chimney samples were obtained from active hydrothermal systems by submersible vehicles: one was natural chimney (NC) on a hydrothermal natural vent; the other was artificial chimneys (AC), mainly formed by the growth and deposition of sulfide-rich particulate components in a Kuwabara-type in situ incubator (KI incubator). Total hydrolyzed amino acids (THAA) and hydrolyzed hexosamines (HA) in AC ranged from 10.7 nmol/g to 64.0 nmol/g and from 0 nmol/g to 8.1 nmol/g, respectively, while THAA in hydrothermally altered core samples ranged from 26.0 nmol/g to 107.4 nmol/g-rock. The THAA was thus of the same order of magnitude in AC and core samples. The representative biochemical indicator ratios of β-alanine/aspartic acid and γ-aminobutyric acid/glutamic acid were low. This is consistent with a large microbial population and labile subterranean biogenic organic compounds. A micro energy dispersive X-ray spectrometer (μEDX) was used to show that the formation of massive pyrite- and chalcopyrite-ores, the major matrixes of the natural chimney structures, were processed during hydrothermal activity. These data suggest that labile particulate organic matter (POM) and/or dissolved organic matter (DOM) from hydrothermal fluid were continuously trapped to form concentrated organic matter in a sulfide-rich matrix.
△ Less
Submitted 17 November, 2013;
originally announced November 2013.
-
Stability and contagion measures for spatial extreme value analyses
Authors:
C. Fonseca,
H. Ferreira,
L. Pereira A. P.,
Martins
Abstract:
As part of global climate change an accelerated hydrologic cycle (including an increase in heavy precipitation) is anticipated. So, it is of great importance to be able to quantify high-impact hydrologic relationships, for example, the impact that an extreme precipitation (or temperature) in a location has on a surrounding region. Building on the Multivariate Extreme Value Theory we propose a cont…
▽ More
As part of global climate change an accelerated hydrologic cycle (including an increase in heavy precipitation) is anticipated. So, it is of great importance to be able to quantify high-impact hydrologic relationships, for example, the impact that an extreme precipitation (or temperature) in a location has on a surrounding region. Building on the Multivariate Extreme Value Theory we propose a contagion index and a stability index. The contagion index makes it possible to quantify the effect that an exceedance above a high threshold can have on a region. The stability index reflects the expected number of crossings of a high threshold in a region associated to a specific location i, given the occurrence of at least one crossing at that location. We will find some relations with well-known extremal dependence measures found in the literature, which will provide immediate estimators. For these estimators an application to the annual maxima precipitation in Portuguese regions is presented.
△ Less
Submitted 6 June, 2012;
originally announced June 2012.
-
Finite State Machine Based Evaluation Model for Web Service Reliability Analysis
Authors:
Thirumaran. M,
Dhavachelvan. P,
S. Abarna,
Lakshmi. P
Abstract:
Now-a-days they are very much considering about the changes to be done at shorter time since the reaction time needs are decreasing every moment. Business Logic Evaluation Model (BLEM) are the proposed solution targeting business logic automation and facilitating business experts to write sophisticated business rules and complex calculations without costly custom programming. BLEM is powerful enou…
▽ More
Now-a-days they are very much considering about the changes to be done at shorter time since the reaction time needs are decreasing every moment. Business Logic Evaluation Model (BLEM) are the proposed solution targeting business logic automation and facilitating business experts to write sophisticated business rules and complex calculations without costly custom programming. BLEM is powerful enough to handle service manageability issues by analyzing and evaluating the computability and traceability and other criteria of modified business logic at run time. The web service and QOS grows expensively based on the reliability of the service. Hence the service provider of today things that reliability is the major factor and any problem in the reliability of the service should overcome then and there in order to achieve the expected level of reliability. In our paper we propose business logic evaluation model for web service reliability analysis using Finite State Machine (FSM) where FSM will be extended to analyze the reliability of composed set of service i.e., services under composition, by analyzing reliability of each participating service of composition with its functional work flow process. FSM is exploited to measure the quality parameters. If any change occurs in the business logic the FSM will automatically measure the reliability.
△ Less
Submitted 7 November, 2011;
originally announced November 2011.