-
MPS: A New Method for Selecting the Stable Closed-Loop Equilibrium Attitude-Error Quaternion of a UAV During Flight
Authors:
Francisco M. F. R. Gonçalves,
Ryan M. Bena,
Konstantin I. Matveev,
Néstor O. Pérez-Arancibia
Abstract:
We present model predictive selection (MPS), a new method for selecting the stable closed-loop (CL) equilibrium attitude-error quaternion (AEQ) of an uncrewed aerial vehicle (UAV) during the execution of high-speed yaw maneuvers. In this approach, we minimize the cost of yawing measured with a performance figure of merit (PFM) that takes into account both the aerodynamic-torque control input and a…
▽ More
We present model predictive selection (MPS), a new method for selecting the stable closed-loop (CL) equilibrium attitude-error quaternion (AEQ) of an uncrewed aerial vehicle (UAV) during the execution of high-speed yaw maneuvers. In this approach, we minimize the cost of yawing measured with a performance figure of merit (PFM) that takes into account both the aerodynamic-torque control input and attitude-error state of the UAV. Specifically, this method uses a control law with a term whose sign is dynamically switched in real time to select, between two options, the torque associated with the lesser cost of rotation as predicted by a dynamical model of the UAV derived from first principles. This problem is relevant because the selection of the stable CL equilibrium AEQ significantly impacts the performance of a UAV during high-speed rotational flight, from both the power and control-error perspectives. To test and demonstrate the functionality and performance of the proposed method, we present data collected during one hundred real-time high-speed yaw-tracking flight experiments. These results highlight the superior capabilities of the proposed MPS-based scheme when compared to a benchmark controller commonly used in aerial robotics, as the PFM used to quantify the cost of flight is reduced by 60.30 %, on average. To our best knowledge, these are the first flight-test results that thoroughly demonstrate, evaluate, and compare the performance of a real-time controller capable of selecting the stable CL equilibrium AEQ during operation.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
VLEIBot: A New 45-mg Swimming Microrobot Driven by a Bioinspired Anguilliform Propulsor
Authors:
Elijah K. Blankenship,
Conor K. Trygstad,
Francisco M. F. R. Gonçalves,
Néstor O. Pérez-Arancibia
Abstract:
This paper presents the VLEIBot^* (Very Little Eel-Inspired roBot), a 45-mg/23-mm^3 microrobotic swimmer that is propelled by a bioinspired anguilliform propulsor. The propulsor is excited by a single 6-mg high-work-density (HWD) microactuator and undulates periodically due to wave propagation phenomena generated by fluid-structure interaction (FSI) during swimming. The microactuator is composed o…
▽ More
This paper presents the VLEIBot^* (Very Little Eel-Inspired roBot), a 45-mg/23-mm^3 microrobotic swimmer that is propelled by a bioinspired anguilliform propulsor. The propulsor is excited by a single 6-mg high-work-density (HWD) microactuator and undulates periodically due to wave propagation phenomena generated by fluid-structure interaction (FSI) during swimming. The microactuator is composed of a carbon-fiber beam, which functions as a leaf spring, and shape-memory alloy (SMA) wires, which deform cyclically when excited periodically using Joule heating. The VLEIBot can swim at speeds as high as 15.1mm * s^{-1} (0.33 Bl * s^{-1}}) when driven with a heuristically-optimized propulsor. To improve maneuverability, we evolved the VLEIBot design into the 90-mg/47-mm^3 VLEIBot^+, which is driven by two propulsors and fully controllable in the two-dimensional (2D) space. The VLEIBot^+ can swim at speeds as high as 16.1mm * s^{-1} (0.35 Bl * s^{-1}), when driven with heuristically-optimized propulsors, and achieves turning rates as high as 0.28 rad * s^{-1}, when tracking path references. The measured root-mean-square (RMS) values of the tracking errors are as low as 4 mm.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
A New 1-mg Fast Unimorph SMA-Based Actuator for Microrobotics
Authors:
Conor K. Trygstad,
Xuan-Truc Nguyen,
Nestor O. Perez-Arancibia
Abstract:
We present a new unimorph actuator for micro-robotics, which is driven by thin shape-memory alloy (SMA) wires. Using a passive-capillary-alignment technique and existing SMA-microsystem fabrication methods, we developed an actuator that is 7 mm long, has a volume of 0.45 mm^3, weighs 0.96 mg, and can achieve operation frequencies of up to 40 Hz as well as lift 155 times its own weight. To demonstr…
▽ More
We present a new unimorph actuator for micro-robotics, which is driven by thin shape-memory alloy (SMA) wires. Using a passive-capillary-alignment technique and existing SMA-microsystem fabrication methods, we developed an actuator that is 7 mm long, has a volume of 0.45 mm^3, weighs 0.96 mg, and can achieve operation frequencies of up to 40 Hz as well as lift 155 times its own weight. To demonstrate the capabilities of the proposed actuator, we created an 8-mg crawler, the MiniBug, and a bioinspired 56-mg controllable water-surface-tension crawler, the WaterStrider. The MiniBug is 8.5 mm long, can locomote at speeds as high as 0.76 BL/s (body-lengths per second), and is the lightest fully-functional crawling microrobot of its type ever created. The WaterStrider is 22 mm long, and can locomote at speeds of up to 0.28 BL/s as well as execute turning maneuvers at angular rates on the order of 0.144 rad/s. The WaterStrider is the lightest controllable SMA-driven water-surface-tension crawler developed to date.
△ Less
Submitted 3 August, 2023;
originally announced September 2023.
-
Electronics-Free Pneumatic Logic Circuits for Localized Feedback Control of Multi-Actuator Soft Robots
Authors:
Ke Xu,
Nestor O. Perez-Arancibia
Abstract:
The vision of creating entirely-soft robots capable of performing complex tasks will be accomplished only when the controllers required for autonomous operation can be fully implemented on soft components. Despite recent advances in compliant fluidic circuitry for mechanical signal processing, the applicability of this technology for soft robot control has been limited by complicated fabrication a…
▽ More
The vision of creating entirely-soft robots capable of performing complex tasks will be accomplished only when the controllers required for autonomous operation can be fully implemented on soft components. Despite recent advances in compliant fluidic circuitry for mechanical signal processing, the applicability of this technology for soft robot control has been limited by complicated fabrication and tuning processes, and also the need for external signals such as clocks and digital references. We propose a method to develop pneumatic soft robots in which coordinated interactions between multiple actuators are performed using controllers implemented on components distributedly embedded in the soft structures of the system. In this approach, the notions of binary and multi-valued actuator logic states are introduced. In this way, the physical local dynamical couplings between the analog states of the actuators, established using soft valves of a new type, can be thought of as logic-gate-based map**s acting on discretized representations of the actuator states. Consequently, techniques for digital logic design can be applied to derive the architectures of the localized mechanical couplings that intelligently coordinate the oscillation patterns of the actuator responses. For the purposes of controller tuning, the soft valves are conceived so that their main physical parameters can be adjusted from the exterior of the robot through simple geometrical changes of the corresponding structural elements. To demonstrate the proposed approach, we present the development of a six-state locomoting soft robot.
△ Less
Submitted 8 March, 2020;
originally announced March 2020.
-
Control of Flying Robotic Insects: A Perspective and Unifying Approach
Authors:
A. A. Calderón,
Y. Chen,
X. Yang,
L. Chang,
X. -T. Nguyen,
E. K. Singer,
N. O. Pérez-Arancibia
Abstract:
We discuss the problem of designing and implementing controllers for insect-scale flap**-wing micro air vehicles (FWMAVs), from a unifying perspective and employing two different experimental platforms; namely, a Harvard RoboBee-like two-winged robot and the four-winged USC Bee+. Through experiments, we demonstrate that a method that employs quaternion coordinates for attitude control, developed…
▽ More
We discuss the problem of designing and implementing controllers for insect-scale flap**-wing micro air vehicles (FWMAVs), from a unifying perspective and employing two different experimental platforms; namely, a Harvard RoboBee-like two-winged robot and the four-winged USC Bee+. Through experiments, we demonstrate that a method that employs quaternion coordinates for attitude control, developed to control quadrotors, can be applied to drive both robotic insects considered in this work. The proposed notion that a generic strategy can be used to control several types of artificial insects with some common characteristics was preliminarily tested and validated using a set of experiments, which include position- and attitude-controlled flights. We believe that the presented results are interesting and valuable from both the research and educational perspectives.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
Bee$^+$: A 95-mg Four-Winged Insect-Scale Flying Robot Driven by Twinned Unimorph Actuators
Authors:
Xiufeng Yang,
Ying Chen,
Longlong Chang,
Ariel A. Calderón,
Néstor O. Pérez-Arancibia
Abstract:
We introduce Bee$^+$, a 95-mg four-winged microrobot with improved controllability and open-loop-response characteristics with respect to those exhibited by state-of-the-art two-winged microrobots with the same size and similar weight (i.e., the 75-mg Harvard RoboBee). The key innovation that made possible the development of Bee$^+$ is the introduction of an extremely light (28-mg) pair of twinned…
▽ More
We introduce Bee$^+$, a 95-mg four-winged microrobot with improved controllability and open-loop-response characteristics with respect to those exhibited by state-of-the-art two-winged microrobots with the same size and similar weight (i.e., the 75-mg Harvard RoboBee). The key innovation that made possible the development of Bee$^+$ is the introduction of an extremely light (28-mg) pair of twinned unimorph actuators, which enabled the design of a new microrobotic mechanism that flaps four wings independently. A first main advantage of the proposed design, compared to those of two-winged flyers, is that by increasing the number of actuators from two to four, the number of direct control inputs increases from three to four when simple sinusoidal excitations are employed. A second advantage of Bee$^+$ is that its four-wing configuration and flap** mode naturally damp the rotational disturbances that commonly affect the yaw degree of freedom of two-winged microrobots. In addition, the proposed design greatly reduces the complexity of the associated fabrication process compared to those of other microrobots, as the unimorph actuators are fairly easy to build. Lastly, we hypothesize that given the relatively low wing-loading affecting their flap** mechanisms, the life expectancy of Bee$^+$s must be considerably higher than those of the two-winged counterparts. The functionality and basic capabilities of the robot are demonstrated through a set of simple control experiments.
△ Less
Submitted 23 July, 2019; v1 submitted 6 May, 2019;
originally announced May 2019.
-
An Earthworm-Inspired Soft Crawling Robot Controlled by Friction
Authors:
Joey Z. Ge,
Ariel A. Calderón,
Néstor O. Pérez-Arancibia
Abstract:
We present the modeling, design, fabrication and feedback control of an earthworm-inspired soft robot capable of crawling on surfaces by actively manipulating the frictional force between its body and the surface. Earthworms are segmented worms composed of repeating units known as metameres. The muscle and setae structure embedded in each individual metamere makes possible its peristaltic locomoti…
▽ More
We present the modeling, design, fabrication and feedback control of an earthworm-inspired soft robot capable of crawling on surfaces by actively manipulating the frictional force between its body and the surface. Earthworms are segmented worms composed of repeating units known as metameres. The muscle and setae structure embedded in each individual metamere makes possible its peristaltic locomotion both under and above ground. Here, we propose a pneumatically-driven soft robotic system made of parts analogous to the muscle and setae structure and can replicate the crawling motion of a single earthworm metamere. A model is also introduced to describe the crawling dynamics of the proposed robotic system and proven be controllable. Robust crawling locomotion is then experimentally verified.
△ Less
Submitted 17 October, 2017; v1 submitted 11 July, 2017;
originally announced July 2017.
