Showing 1–50 of 205 results for author: PÉrez, S

Studying single-electron traps in newly fabricated Skipper-CCDs for the Oscura experiment using the pocket-pum** technique

Authors: S. E. Perez, B. A. Cervantes-Vergara, J. Estrada, S. Holland, D. Rodrigues, J. Tiffenberg

Abstract: Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of… ▽ More Understanding and characterizing very low-energy ($\sim$eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10-kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of these newly fabricated skipper-CCDs. These defects/contaminants produce deferred charge from trap emission in the images next to particle tracks, which can be spatially resolved due to the sub-electron resolution achieved with these sensors. Using the trap-pum** technique, we measured the energy and cross section associated to these traps in three Oscura prototype sensors from different fabrication batches which underwent different gettering methods during fabrication. Results suggest that the type of defects/contaminants is more closely linked to the fabrication batch rather than to the gettering method used. The exposure-dependent single-electron rate (SER) of one of these sensors was measured $\sim$100~m underground, yielding $(1.8\pm 0.3)\times10^{-3}~e^-$/pix/day at 131K. The impact of the identified traps on the measured exposure-dependent SER is evaluated via a Monte Carlo simulation. Results suggest that the exposure-dependent SER of Oscura prototype sensors would be lower in lower background environments as expected. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Lattice Lipschitz superposition operators on Banach function spaces

Authors: Roger Arnau, Jose M. Calabuig, Ezgi Erdoğan, Enrique A. Sánchez Pérez

Abstract: We analyse and characterise the notion of lattice Lipschitz operator (a class of superposition operators, diagonal Lipschitz maps) when defined between Banach function spaces. After showing some general results, we restrict our attention to the case of those Lipschitz operators which are representable by pointwise composition with a strongly measurable function. Mimicking the classical definition… ▽ More We analyse and characterise the notion of lattice Lipschitz operator (a class of superposition operators, diagonal Lipschitz maps) when defined between Banach function spaces. After showing some general results, we restrict our attention to the case of those Lipschitz operators which are representable by pointwise composition with a strongly measurable function. Mimicking the classical definition and characterizations of (linear) multiplication operators between Banach function spaces, we show that under certain conditions the requirement for a diagonal Lipschitz operator to be well-defined between two such spaces $X(μ)$ and $Y(μ)$ is that it can be represented by a strongly measurable function which belongs to the Bochner space $\mathcal M(X,Y) \big(μ, Lip_0(\mathbb R) \big). $ Here, $\mathcal M(X,Y) $ is the space of multiplication operators between $X(μ)$ and $Y(μ),$ and $Lip_0(\mathbb R)$ is the space of real-valued Lipschitz maps with real variable that are equal to $0$ in $0. $ This opens the door to a better understanding of these maps, as well as finding the relation of these operators to some normed tensor products and other classes of maps. △ Less

Submitted 6 June, 2024; originally announced June 2024.

MSC Class: 47J10; 46E30; 26A16

Search for reactor-produced millicharged particles with Skipper-CCDs at the CONNIE and Atucha-II experiments

Authors: Alexis A. Aguilar-Arevalo, Nicolas Avalos, Pablo Bellino, Xavier Bertou, Carla Bonifazi, Ana Botti, Mariano Cababié, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Claudio Chavez, Fernando Chierchie, David Delgado, Eliana Depaoli, Juan Carlos D'Olivo, João dos Anjos, Juan Estrada, Guillermo Fernandez Moroni, Aldo R. Fernandes Neto, Richard Ford, Ben Kilminster, Kevin Kuk, Andrew Lathrop, Patrick Lemos, Herman P. Lima Jr., Martin Makler , et al. (15 additional authors not shown)

Abstract: Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CON… ▽ More Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CONNIE and Atucha-II reactor neutrino experiments utilize Skipper-CCD sensors, which enable the detection of interactions in the eV range. We present world-leading limits on the charge of millicharged particles within a mass range spanning six orders of magnitude, derived through a comprehensive analysis and the combination of data from both experiments. △ Less

Submitted 25 May, 2024; originally announced May 2024.

Comments: 9 pages, 3 figures

Astrometric and photometric characterization of $η$ Tel B combining two decades of observations

Authors: P. H. Nogueira, C. Lazzoni, A. Zurlo, T. Bhowmik, C. Donoso-Oliva, S. Desidera, J. Milli, S. Pérez, P. Delorme, A. Fernadez, M. Langlois, S. Petrus, G. Cabrera-Vives, G. Chauvin

Abstract: $η$ Tel is an 18 Myr system with a 2.09 M$_{\odot}$ A-type star and an M7-M8 brown dwarf companion, $η$ Tel B, separated by 4.2'' (208 au). High-contrast imaging campaigns over 20 years have enabled orbital and photometric characterization. $η$ Tel B, bright and on a wide orbit, is ideal for detailed examination. We analyzed three new SPHERE/IRDIS coronagraphic observations to explore $η… ▽ More $η$ Tel is an 18 Myr system with a 2.09 M$_{\odot}$ A-type star and an M7-M8 brown dwarf companion, $η$ Tel B, separated by 4.2'' (208 au). High-contrast imaging campaigns over 20 years have enabled orbital and photometric characterization. $η$ Tel B, bright and on a wide orbit, is ideal for detailed examination. We analyzed three new SPHERE/IRDIS coronagraphic observations to explore $η$ Tel B's orbital parameters, contrast, and surroundings, aiming to detect a circumplanetary disk or close companion. Reduced IRDIS data achieved a contrast of 1.0$\times 10^{-5}$, enabling astrometric measurements with uncertainties of 4 mas in separation and 0.2 degrees in position angle, the smallest so far. With a contrast of 6.8 magnitudes in the H band, $η$ Tel B's separation and position angle were measured as 4.218'' and 167.3 degrees, respectively. Orbital analysis using Orvara code, considering Gaia-Hipparcos acceleration, revealed a low eccentric orbit (e $\sim$ 0.34), inclination of 81.9 degrees, and semi-major axis of 218 au. $η$ Tel B's mass was determined to be 48 \MJup, consistent with previous calculations. No significant residual indicating a satellite or disk around $η$ Tel B was detected. Detection limits ruled out massive objects around $η$ Tel B with masses down to 1.6 \MJup at a separation of 33 au. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 13 pages, 10 figures, accepted for publication in A&A (01/05/2024)

Discovery of an accretion streamer and a slow wide-angle outflow around FU Orionis

Authors: A. S. Hales, A. Gupta, D. Ruiz-Rodriguez, J. P. Williams, S. Perez, L. Cieza, C. Gonzalez-Ruilova, J. E. Pineda, A. Santamaria-Miranda, J. Tobin, P. Weber, Z. Zhu, A. Zurlo

Abstract: We present ALMA 12-m, 7-m & Total Power (TP) Array observations of the FU Orionis outbursting system, covering spatial scales ranging from 160 to 25,000 au. The high-resolution interferometric data reveals an elongated $^{12}$CO(2-1) feature previously observed at lower resolution in $^{12}$CO(3-2). Kinematic modeling indicates that this feature can be interpreted as an accretion streamer feeding… ▽ More We present ALMA 12-m, 7-m & Total Power (TP) Array observations of the FU Orionis outbursting system, covering spatial scales ranging from 160 to 25,000 au. The high-resolution interferometric data reveals an elongated $^{12}$CO(2-1) feature previously observed at lower resolution in $^{12}$CO(3-2). Kinematic modeling indicates that this feature can be interpreted as an accretion streamer feeding the binary system. The mass infall rate provided by the streamer is significantly lower than the typical stellar accretion rates (even in quiescent states), suggesting that this streamer alone is not massive enough to sustain the enhanced accretion rates characteristic of the outbursting class prototype. The observed streamer may not be directly linked to the current outburst but rather a remnant of a previous, more massive streamer that may have contributed enough to the disk mass to render it unstable and trigger FU Ori's outburst. The new data detects, for the first time, a vast, slow-moving carbon monoxide molecular outflow emerging from this object. To accurately assess the outflow properties (mass, momentum, kinetic energy), we employed $^{13}$CO(2-1) data to correct for optical depth effects. The analysis indicates that the outflow corresponds to swept-up material not associated with the current outburst, similar to slow-molecular outflows observed around other FUor and Class I protostellar objects. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Journal ref: 2024, ApJ, 966, 96H

Advanced simulation-based predictive modelling for solar irradiance sensor farms

Authors: José L. Risco-Martín, Ignacio-Iker Prado-Rujas, Javier Campoy, María S. Pérez, Katzalin Olcoz

Abstract: As solar power continues to grow and replace traditional energy sources, the need for reliable forecasting models becomes increasingly important to ensure the stability and efficiency of the grid. However, the management of these models still needs to be improved, and new tools and technologies are required to handle the deployment and control of solar facilities. This work introduces a novel fram… ▽ More As solar power continues to grow and replace traditional energy sources, the need for reliable forecasting models becomes increasingly important to ensure the stability and efficiency of the grid. However, the management of these models still needs to be improved, and new tools and technologies are required to handle the deployment and control of solar facilities. This work introduces a novel framework named Cloud-based Analysis and Integration for Data Efficiency (CAIDE), designed for real-time monitoring, management, and forecasting of solar irradiance sensor farms. CAIDE is designed to manage multiple sensor farms simultaneously while improving predictive models in real-time using well-grounded Modeling and Simulation (M&S) methodologies. The framework leverages Model Based Systems Engineering (MBSE) and an Internet of Things (IoT) infrastructure to support the deployment and analysis of solar plants in dynamic environments. The system can adapt and re-train the model when given incorrect results, ensuring that forecasts remain accurate and up-to-date. Furthermore, CAIDE can be executed in sequential, parallel, and distributed architectures, assuring scalability. The effectiveness of CAIDE is demonstrated in a complex scenario composed of several solar irradiance sensor farms connected to a centralized management system. Our results show that CAIDE is scalable and effective in managing and forecasting solar power production while improving the accuracy of predictive models in real time. The framework has important implications for the deployment of solar plants and the future of renewable energy sources. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Journal ref: Journal of Simulation, pp. 1-18, 2024

Polarimetric differential imaging with VLT/NACO. A comprehensive PDI pipeline for NACO data (PIPPIN)

Authors: S. de Regt, C. Ginski, M. A. Kenworthy, C. Caceres, A. Garufi, T. M. Gledhill, A. S. Hales, N. Huelamo, A. Kospal, M. A. Millar-Blanchaer, S. Perez, M. R. Schreiber

Abstract: The observed diversity of exoplanets can possibly be traced back to the planet formation processes. Planet-disk interactions induce sub-structures in the circumstellar disk that can be revealed via scattered light observations. However, a high-contrast imaging technique such as polarimetric differential imaging (PDI) must first be applied to suppress the stellar diffraction halo. In this work we p… ▽ More The observed diversity of exoplanets can possibly be traced back to the planet formation processes. Planet-disk interactions induce sub-structures in the circumstellar disk that can be revealed via scattered light observations. However, a high-contrast imaging technique such as polarimetric differential imaging (PDI) must first be applied to suppress the stellar diffraction halo. In this work we present the PDI PiPelIne for NACO data (PIPPIN), which reduces the archival polarimetric observations made with the NACO instrument at the Very Large Telescope. Prior to this work, such a comprehensive pipeline to reduce polarimetric NACO data did not exist. We identify a total of 243 datasets of 57 potentially young stellar objects observed before NACO's decommissioning. The PIPPIN pipeline applies various levels of instrumental polarisation correction and is capable of reducing multiple observing setups, including half-wave plate or de-rotator usage and wire-grid observations. A novel template-matching method is applied to assess the detection significance of polarised signals in the reduced data. In 22 of the 57 observed targets, we detect polarised light resulting from a scattering of circumstellar dust. The detections exhibit a collection of known sub-structures, including rings, gaps, spirals, shadows, and in- or outflows of material. Since NACO was equipped with a near-infrared wavefront sensor, it made unique polarimetric observations of a number of embedded protostars. This is the first time detections of the Class I objects Elia 2-21 and YLW 16A have been published. Alongside the outlined PIPPIN pipeline, we publish an archive of the reduced data products, thereby improving the accessibility of these data for future studies. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: Accepted for publication in A&A. For more information on PIPPIN, see: https://pippin-naco.readthedocs.io/en/latest . The reduced images are available on Zenodo: https://zenodo.org/doi/10.5281/zenodo.8348803

The environment around young eruptive stars. SPHERE/IRDIS polarimetric imaging of 7 protostars

Authors: A. Zurlo, P. Weber, S. Pérez, L. Cieza, C. Ginski, R. G. van Holstein, D. Principe, A. Garufi, A. Hales, J. Kastner, E. Rigliaco, G. Ruane, M. Benisty, C. Manara

Abstract: Eruptive stars are a class of young stellar objects that show an abrupt increase in their luminosity. These burst-like episodes are thought to dominate the stellar accretion process during the class 0/class I stage. We present an overview of a survey of seven episodically accreting protostars aimed at studying their potentially complex circumstellar surroundings. The observations were performed wi… ▽ More Eruptive stars are a class of young stellar objects that show an abrupt increase in their luminosity. These burst-like episodes are thought to dominate the stellar accretion process during the class 0/class I stage. We present an overview of a survey of seven episodically accreting protostars aimed at studying their potentially complex circumstellar surroundings. The observations were performed with the instrument SPHERE, mounted at the VLT. We observed the eruptive stars in $H$-band with the near-infrared imager IRDIS and used the polarimeter to extract the polarized light scattered from the stars' surroundings. We produced polarized light images for three FUor objects, Z CMa, V960 Mon, and FU Ori, and four EXor objects, XZ Tau, UZ Tau, NY Ori, and EX Lup. We calculated the intrinsic polarization fraction for all the observed stars. In all systems we registered scattered light from around the primary star. FU Ori and V960 Mon are surrounded by complex structures including spiral-like features. In Z CMa, we detected a point source 0.7 arcsec to the northeast of the primary. Based on the astrometric measurements from archival Keck/NIRC2 data, we find this source to be a third member of the system. Further, Z CMa displays an outflow extending thousands of au. Unlike the other EXor objects in our sample, XZ Tau shows bright, extended scattered light structures, also associated with an outflow on a scale of hundreds of au. The other EXors show relatively faint disk-like structures in the immediate vicinity of the coronagraph. Asymmetric arms were only found around FUor objects, while faint disks seem to predominantly occur around EXors. Importantly, for Z CMa the detection of the faint extended structure questions previous interpretations of the system's dynamic state. The streamer which was associated with a fly-by object turned out to be part of a huge outflow extending 6000 au. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: Accepted for publication in A&A. 14 pages, 7 figures, 2 tables

The SPHERE view of the Taurus star-forming region

Authors: A. Garufi, C. Ginski, R. G. van Holstein, M. Benisty, C. F. Manara, S. Pérez, P. Pinilla, Á. Ribas, P. Weber, J. Williams, L. Cieza, C. Dominik, S. Facchini, J. Huang, A. Zurlo, J. Bae, J. Hagelberg, Th. Henning, M. R. Hogerheijde, M. Janson, F. Ménard, S. Messina, M. R. Meyer, C. Pinte, S. P. Quanz , et al. (9 additional authors not shown)

Abstract: The sample of planet-forming disks observed by high-contrast imaging campaigns over the last decade is mature enough to enable the demographical analysis of individual star-forming regions. We present the full census of Taurus sources with VLT/SPHERE polarimetric images available. The whole sample sums up to 43 targets (of which 31 have not been previously published) corresponding to one-fifth of… ▽ More The sample of planet-forming disks observed by high-contrast imaging campaigns over the last decade is mature enough to enable the demographical analysis of individual star-forming regions. We present the full census of Taurus sources with VLT/SPHERE polarimetric images available. The whole sample sums up to 43 targets (of which 31 have not been previously published) corresponding to one-fifth of the Class II population in Taurus and about half of such objects that are observable. A large fraction of the sample is apparently made up of isolated faint disks (equally divided between small and large self-shadowed disks). Ambient signal is visible in about one-third of the sample. This probes the interaction with the environment and with companions or the outflow activity of the system. The central portion of the Taurus region almost exclusively hosts faint disks, while the periphery also hosts bright disks interacting with their surroundings. The few bright disks are found around apparently older stars. The overall picture is that the Taurus region is in an early evolutionary stage of planet formation. Yet, some objects are discussed individually, as in an intermediate or exceptional stage of the disk evolution. This census provides a first benchmark for the comparison of the disk populations in different star forming regions. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Comments: Accepted by A&A

Moduli of Continuity in Metric Models and Extension of Liveability Indices

Authors: R. Arnau, J. M. Calabuig, Álvaro González, Enrique A. Sánchez Pérez

Abstract: Index spaces serve as valuable metric models for studying properties relevant to various applications, such as social science or economics. These properties are represented by real Lipschitz functions that describe the degree of association with each element within the underlying metric space. After determining the index value within a given sample subset, the classic McShane and Whitney formulas… ▽ More Index spaces serve as valuable metric models for studying properties relevant to various applications, such as social science or economics. These properties are represented by real Lipschitz functions that describe the degree of association with each element within the underlying metric space. After determining the index value within a given sample subset, the classic McShane and Whitney formulas allow a Lipschitz regression procedure to be performed to extend the index values over the entire metric space. To improve the adaptability of the metric model to specific scenarios, this paper introduces the concept of a composition metric, which involves composing a metric with an increasing, positive and subadditive function $φ$. The results presented here extend well-established results for Lipschitz indices on metric spaces to composition metrics. In addition, we establish the corresponding approximation properties that facilitate the use of this functional structure. To illustrate the power and simplicity of this mathematical framework, we provide a concrete application involving the modelling of livability indices in North American cities. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Aperiodic two-layer energy management system for community microgrids based on blockchain strategy

Authors: Miguel Gayo Abeleira, Carlos Santos Pérez, Francisco Javier Rodríguez Sánchez, Pedro Martín Sánchez, Enrique Santiso Gómez, José Antonio Jiménez Calvo

Abstract: This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is res… ▽ More This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is responsible for creating local energy markets with the aim of maximising the economic benefits for community microgrid members. The second layer is responsible for the network reconfiguration, which is based on the energy balance within each cluster. This layer complies with the IEC 61850 communication standard, in order to control commercial sectionalizing and tie switches. This allows the community microgrid network to be reconfigured to minimise energy exchanges with the main grid. To implement this two-layer energy management strategy, an aperiodic market approach based on Blockchain technology, and the additional functionality offered by Smart Contracts is adopted. This embraces the concept of energy communities since it decentralizes the control and eliminates intermediaries. The use of aperiodic control techniques helps to overcome the challenges of using Blockchain technology in terms of storage, computational requirements and member privacy. The scalability and modularity of the Smart Contract-based system allow each cluster of members to be designed by tailoring the system to their specific needs. The implementation of this strategy is based on low-cost off-the-shelf devices, such as Raspberry Pi 4 Model B boards, which operate as Blockchain nodes of community microgrid members. Finally, the strategy has been validated by emulating two use cases based on the IEEE 123-node system network model highlighting the benefits of the proposal. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Journal ref: Applied Energy, Volume 324, 2022, 119847, ISSN 0306-2619

Magnetized Strange Stars and Signals of Gravitational Waves

Authors: S. López Pérez, D. Manreza Paret, A. Pérez Martínez

Abstract: We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the… ▽ More We study the emission of gravitational waves from spheroidal magnetized strange stars for both an isolated slowly rotating star and a binary system. In the first case, we compute the quadrupole moment and the amplitude of gravitational waves that may be emitted. For the binary system, the tidal deformability is obtained by solving simultaneously the system of spheroidal structure equations and the Love number equation. These results are compared with the data inferred from the GW170817 event which is also used to calculate the mass and tidal deformability of the companion star in the binary system. Our model supports binary systems formed by magnetized strange stars describing reasonable signals of gravitational waves contrasted with other models of binary systems composed of magnetized hadronic stars and non-magnetized quark stars. △ Less

Submitted 31 January, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

Deployment and performance of a Low-Energy-Threshold Skipper-CCD inside a nuclear reactor

Authors: E. Depaoli, D. Rodrigues, I. Sidelnik, P. Bellino, A. Botti, D. Delgado, M. Cababie, F. Chierchie, J. Estrada, G. Fernandez Moroni, S. Perez, J. Tiffenberg

Abstract: Charge Coupled Devices (CCD) are used for reactor neutrino experiments and already shown their potential in constraining new physics models. The prospect of a Skipper-CCD experiment looking for standard and beyond standard model physics (BSM) in a nuclear reactor has been recently evaluated for different benchmark scenarios. Here we report the installation of the first 2 g Skipper-CCD inside the c… ▽ More Charge Coupled Devices (CCD) are used for reactor neutrino experiments and already shown their potential in constraining new physics models. The prospect of a Skipper-CCD experiment looking for standard and beyond standard model physics (BSM) in a nuclear reactor has been recently evaluated for different benchmark scenarios. Here we report the installation of the first 2 g Skipper-CCD inside the containment building of a 2 GW$_{th}$ nuclear power plant, positioned 12 meters from the center of the reactor core. We discuss the challenges involved in the commissioning of the detector and present data acquired during reactor ON and reactor OFF periods, with the detector operating with a sub-electron readout noise of 0.17 e-. The ongoing efforts to improve sensitivities to CEvNS and BSM interaction are also discussed. △ Less

Submitted 7 March, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures, 1 table

SENSEI: First Direct-Detection Results on sub-GeV Dark Matter from SENSEI at SNOLAB

Authors: SENSEI Collaboration, Prakruth Adari, Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Brenda A. Cervantes-Vergara, Michael Crisler, Miguel Daal, Ansh Desai, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Stephen E. Holland, Yonatan Kehat, Yaron Korn, Ian Lawson, Steffon Luoma, Aviv Orly, Santiago E. Perez, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza , et al. (12 additional authors not shown)

Abstract: We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 elect… ▽ More We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 electrons. The two-electron events are consistent with pileup from one-electron events. Among the 4 three-electron events, 2 appear in pixels that are likely impacted by detector defects, although not strongly enough to trigger our "hot-pixel" mask. We use these data to set world-leading constraints on sub-GeV dark matter interacting with electrons and nuclei. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 5 pages, 2 figures, + Supplemental Materials (5 pages, 5 figures) + References

Report number: YITP-SB-2023-30, FERMILAB-PUB-23-0824-CSAID-PPD

Viscous heating as the dominant heat source inside the water snowline of V883 Ori

Authors: Felipe Alarcón, Simón Casassus, Wladimir lyra, Sebastián Pérez, Lucas Cieza

Abstract: FU Orionis-type objects(FUors) are embedded protostars that undergo episodes of high accretion, potentially indicating a widespread but poorly understood phase in the formation of low-mass stars. Gaining a better understanding of the influence exerted by these outbursts on the evolution of the surrounding protoplanetary disc may hold significant implications for the process of planet formation and… ▽ More FU Orionis-type objects(FUors) are embedded protostars that undergo episodes of high accretion, potentially indicating a widespread but poorly understood phase in the formation of low-mass stars. Gaining a better understanding of the influence exerted by these outbursts on the evolution of the surrounding protoplanetary disc may hold significant implications for the process of planet formation and the evolution of disc chemistry. The heating due to outbursts of high accretion in FUors pushes the snowlines of key volatiles farther out in the disc, so they become easier to observe and study. Among the known FUors, V883 Ori is of particular interest. V883 Ori was the first FUor to show indirect evidence of a resolvable snowline beyond 40 au. By introducing a radial-dependent model of this source including viscous heating, we show that active heating is needed to reproduce the steep thermal profile of dust in the inner disc of V883 Ori. Our disc modeling combines the effect of stellar irradiation and the influence on the disc shape caused by the outburst of accretion. The accuracy of our model is tested by comparing synthetic ALMA images with continuum observations of V883 Ori, showing that the model successfully reproduces the 1.3 mm emission of V883 Ori at high spatial resolution. Our final predictions underline the importance of viscous heating as a predominant heat source for this type of object, changing the physical conditions (shape and temperature) of the disc, and influencing its evolution. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: Accepted for publication in MNRAS

The distribution amplitude of the $η_c$ meson

Authors: Miguel Teseo San José Pérez, Benoît Blossier, Mariane Mangin-Brinet, José Manuel Morgado Chávez

Abstract: We report on the first lattice determination of the pseudoscalar meson $η_c$ light-cone distribution amplitude, using a set of three CLS $N_f=2$ ensembles at a pion mass $m_π \sim 270~\text{MeV}$ and lattice spacings $a \sim 0.076~\text{fm}$, $0.066~\text{fm}$ and $0.049~\text{fm}$. Employing Short Distance Factorization, we extract the pseudo-DA on the lattice for Ioffe times $ν\leq 4.5$, and the… ▽ More We report on the first lattice determination of the pseudoscalar meson $η_c$ light-cone distribution amplitude, using a set of three CLS $N_f=2$ ensembles at a pion mass $m_π \sim 270~\text{MeV}$ and lattice spacings $a \sim 0.076~\text{fm}$, $0.066~\text{fm}$ and $0.049~\text{fm}$. Employing Short Distance Factorization, we extract the pseudo-DA on the lattice for Ioffe times $ν\leq 4.5$, and the various lattice spacings allow us to take the continuum limit. We employ a basis of Jacobi polynomials to parametrize the distribution amplitude, which allows to express the matching to the pseudo distribution in closed form, and we observe a strong effect which we attribute to the heavy charm-quark mass. △ Less

Submitted 20 November, 2023; v1 submitted 16 November, 2023; originally announced November 2023.

Comments: Contribution to the 40th International Symposium on Lattice Field Theory (Lattice 2023), July 31st - August 4th, 2023. Fermi National Accelerator Laboratory

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

Authors: A. A. Aguilar-Arevalo, J. L. Barrow, C. Bhat, J. Bogenschuetz, C. Bonifazi, A. Bross, B. Cervantes, J. D'Olivo, A. De Roeck, B. Dutta, M. Eads, J. Eldred, J. Estrada, A. Fava, C. Fernandes Vilela, G. Fernandez Moroni, B. Flaugher, S. Gardiner, G. Gurung, P. Gutierrez, W. Y. Jang, K. J. Kelly, D. Kim, T. Kobilarcik, Z. Liu , et al. (23 additional authors not shown)

Abstract: The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on Ma… ▽ More The Fermilab Proton-Improvement-Plan-II (PIP-II) is being implemented in order to support the precision neutrino oscillation measurements at the Deep Underground Neutrino Experiment, the U.S. flagship neutrino experiment. The PIP-II LINAC is presently under construction and is expected to provide 800~MeV protons with 2~mA current. This white paper summarizes the outcome of the first workshop on May 10 through 13, 2023, to exploit this capability for new physics opportunities in the kinematic regime that are unavailable to other facilities, in particular a potential beam dump facility implemented at the end of the LINAC. Various new physics opportunities have been discussed in a wide range of kinematic regime, from eV scale to keV and MeV. We also emphasize that the timely establishment of the beam dump facility at Fermilab is essential to exploit these new physics opportunities. △ Less

Submitted 16 November, 2023; originally announced November 2023.

Report number: FERMILAB-FN-1242-AD-ND-PPD

Atomistic origins of asymmetric charge-discharge kinetics in off-stoichiometric LiNiO$_2$

Authors: Penghao Xiao, Ning Zhang, Harold Smith Perez, Minjoon Park

Abstract: LiNiO$_2$ shows poor Li transport kinetics at the ends of charge and discharge in the first cycle, which significantly reduces its available capacity in practice. The atomistic origins of these kinetic limits have not been fully understood. Here, we examine Li transport in LiNiO$_2$ by first-principles-based kinetic Monte Carlo simulations where both long time scale and large length scale are achi… ▽ More LiNiO$_2$ shows poor Li transport kinetics at the ends of charge and discharge in the first cycle, which significantly reduces its available capacity in practice. The atomistic origins of these kinetic limits have not been fully understood. Here, we examine Li transport in LiNiO$_2$ by first-principles-based kinetic Monte Carlo simulations where both long time scale and large length scale are achieved, enabling direct comparison with experiments. Our results reveal the rate-limiting steps at both ends of the voltage scan and distinguish the differences between charge and discharge at the same Li content. The asymmetric effects of excess Ni in the Li layer (Ni$_\textrm{Li}$) are also captured in our unified modelling framework. In the low voltage region, the first cycle capacity loss due to high overpotential at the end of discharge is reproduced without empirical input. While the Li concentration gradient is found responsible for the low overpotential during charge at this state of charge. Ni$_\textrm{Li}$ increases the overpotential of discharge but not charge because it only impedes Li diffusion in a particular range of Li concentration and does not change the equilibrium voltage profile. The trends from varying the amount of Ni$_\textrm{Li}$ and temperature agree with experiments. In the high voltage region, charge becomes the slower process. The bottleneck becomes moving a Li from the Li-rich phase (H2) into the Li-poor phase (H3), while the Li hop** barriers in both phases are relatively low. The roles of preexisting nucleation sites and Ni$_\textrm{Li}$ are discussed. These results provide new atomistic insights of the kinetic hindrances, paving the road to unleash the full potential of high-Ni layered oxide cathodes. △ Less

Submitted 10 November, 2023; originally announced November 2023.

Unleashing quantum algorithms with Qinterpreter: bridging the gap between theory and practice across leading quantum computing platforms

Authors: Wilmer Contreras Sepúlveda, Ángel David Torres-Palencia, José Javier Sánchez Mondragón, Braulio Misael Villegas-Martínez, J. Jesús Escobedo-Alatorre, Sandra Gesing, Néstor Lozano-Crisóstomo, Julio César García-Melgarejo, Juan Carlos Sánchez Pérez, Eddie Nelson Palacios- Pérez, Omar PalilleroSandoval

Abstract: Quantum computing is a rapidly emerging and promising field that has the potential to revolutionize numerous research domains, including drug design, network technologies and sustainable energy. Due to the inherent complexity and divergence from classical computing, several major quantum computing libraries have been developed to implement quantum algorithms, namely IBM Qiskit, Amazon Braket, Cirq… ▽ More Quantum computing is a rapidly emerging and promising field that has the potential to revolutionize numerous research domains, including drug design, network technologies and sustainable energy. Due to the inherent complexity and divergence from classical computing, several major quantum computing libraries have been developed to implement quantum algorithms, namely IBM Qiskit, Amazon Braket, Cirq, PyQuil, and PennyLane. These libraries allow for quantum simulations on classical computers and facilitate program execution on corresponding quantum hardware, e.g., Qiskit programs on IBM quantum computers. While all platforms have some differences, the main concepts are the same. QInterpreter is a tool embedded in the Quantum Science Gateway QubitHub using Jupyter Notebooks that translates seamlessly programs from one library to the other and visualizes the results. It combines the five well-known quantum libraries: into a unified framework. Designed as an educational tool for beginners, Qinterpreter enables the development and execution of quantum circuits across various platforms in a straightforward way. The work highlights the versatility and accessibility of Qinterpreter in quantum programming and underscores our ultimate goal of pervading Quantum Computing through younger, less specialized, and diverse cultural and national communities. △ Less

Submitted 13 October, 2023; v1 submitted 10 October, 2023; originally announced October 2023.

Training and inference of large language models using 8-bit floating point

Authors: Sergio P. Perez, Yan Zhang, James Briggs, Charlie Blake, Josh Levy-Kramer, Paul Balanca, Carlo Luschi, Stephen Barlow, Andrew William Fitzgibbon

Abstract: FP8 formats are gaining popularity to boost the computational efficiency for training and inference of large deep learning models. Their main challenge is that a careful choice of scaling is needed to prevent degradation due to the reduced dynamic range compared to higher-precision formats. Although there exists ample literature about selecting such scalings for INT formats, this critical aspect h… ▽ More FP8 formats are gaining popularity to boost the computational efficiency for training and inference of large deep learning models. Their main challenge is that a careful choice of scaling is needed to prevent degradation due to the reduced dynamic range compared to higher-precision formats. Although there exists ample literature about selecting such scalings for INT formats, this critical aspect has yet to be addressed for FP8. This paper presents a methodology to select the scalings for FP8 linear layers, based on dynamically updating per-tensor scales for the weights, gradients and activations. We apply this methodology to train and validate large language models of the type of GPT and Llama 2 using FP8, for model sizes ranging from 111M to 70B. To facilitate the understanding of the FP8 dynamics, our results are accompanied by plots of the per-tensor scale distribution for weights, activations and gradients during both training and inference. △ Less

Submitted 29 September, 2023; originally announced September 2023.

ACM Class: I.2.7; B.2.4

Radio-continuum decrements associated to shadowing from the central warp in transition disc DoAr44

Authors: Carla Arce-Tord, Simon Casassus, William R. F. Dent, Sebastián Pérez, Miguel Cárcamo, Philipp Weber, Natalia Engler, Lucas A. Cieza, Antonio Hales, Alice Zurlo, Sebastian Marino

Abstract: Warps have often been used to explain disc properties, but well characterised examples are important due to their role in disc evolution. Scattered light images of discs with central gaps have revealed sharp warps, such that the outer rings are shadowed by tilted inner discs. The near-IR intensity drops along the ring around TTauri star DoAr44 have been interpreted in terms of a central warp. We r… ▽ More Warps have often been used to explain disc properties, but well characterised examples are important due to their role in disc evolution. Scattered light images of discs with central gaps have revealed sharp warps, such that the outer rings are shadowed by tilted inner discs. The near-IR intensity drops along the ring around TTauri star DoAr44 have been interpreted in terms of a central warp. We report new ALMA observations of DoAr44 in the continuum at 230 GHz and 350 GHz (at ~10 au), along with a new epoch of SPHERE/IRDIS differential polarised imaging taken during excellent weather conditions. The ALMA observations resolve the ring and confirm the decrements proposed from deconvolution of coarse 336 GHz data. The scattered light image constrains the dips, which correspond to a misaligned inner disc with a relative inclination $ξ$ = 21.4 $^{+6.7}_{-8.3}$ deg. The SPHERE intensity profile shows a morphological change compared to a previous epoch that may be interpreted as a variable orientation of the inner disc, from $ξ$ ~30 deg to $ξ$ ~20 deg. The intensity dips probably correspond to temperature decrements, as their mm-spectral index, $α^{230 GHz}_{350 GHz}$ ~2.0 $\pm$ 0.1, is indicative of optically thick emission. The azimuth of the two temperature decrements are leading clockwise relative to the IR-dips, by $η$ = 14.95 deg and $η$ = 7.92 deg. For a retrograde disc, such shifts are expected from a thermal lag and imply gas surface densities of $Σ_g$ = 117 $\pm$ 10 g/cm$^2$ and $Σ_g$ = 48 $\pm$ 10 g/cm$^2$. A lopsided disc, with contrast ratio $f_r$=2.4 $\pm$ 0.5, is also consistent with the large continuum crescent. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Comments: accepted in MNRAS

Auto-weighted Bayesian Physics-Informed Neural Networks and robust estimations for multitask inverse problems in pore-scale imaging of dissolution

Authors: Sarah Perez, Philippe Poncet

Abstract: In this article, we present a novel data assimilation strategy in pore-scale imaging and demonstrate that this makes it possible to robustly address reactive inverse problems incorporating Uncertainty Quantification (UQ). Pore-scale modeling of reactive flow offers a valuable opportunity to investigate the evolution of macro-scale properties subject to dynamic processes. Yet, they suffer from imag… ▽ More In this article, we present a novel data assimilation strategy in pore-scale imaging and demonstrate that this makes it possible to robustly address reactive inverse problems incorporating Uncertainty Quantification (UQ). Pore-scale modeling of reactive flow offers a valuable opportunity to investigate the evolution of macro-scale properties subject to dynamic processes. Yet, they suffer from imaging limitations arising from the associated X-ray microtomography (X-ray microCT) process, which induces discrepancies in the properties estimates. Assessment of the kinetic parameters also raises challenges, as reactive coefficients are critical parameters that can cover a wide range of values. We account for these two issues and ensure reliable calibration of pore-scale modeling, based on dynamical microCT images, by integrating uncertainty quantification in the workflow. The present method is based on a multitasking formulation of reactive inverse problems combining data-driven and physics-informed techniques in calcite dissolution. This allows quantifying morphological uncertainties on the porosity field and estimating reactive parameter ranges through prescribed PDE models with a latent concentration field and dynamical microCT. The data assimilation strategy relies on sequential reinforcement incorporating successively additional PDE constraints. We guarantee robust and unbiased uncertainty quantification by straightforward adaptive weighting of Bayesian Physics-Informed Neural Networks (BPINNs), ensuring reliable micro-porosity changes during geochemical transformations. We demonstrate successful Bayesian Inference in 1D+Time and 2D+Time calcite dissolution based on synthetic microCT images with meaningful posterior distribution on the reactive parameters and dimensionless numbers. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Spirals and clumps in V960 Mon: signs of planet formation via gravitational instability around an FU Ori star?

Authors: P. Weber, S. Pérez, A. Zurlo, J. Miley, A. Hales, L. Cieza, D. Principe, M. Cárcamo, A. Garufi, Á. Kóspál, M. Takami, J. Kastner, Z. Zhu, J. Williams

Abstract: The formation of giant planets has traditionally been divided into two pathways: core accretion and gravitational instability. However, in recent years, gravitational instability has become less favored, primarily due to the scarcity of observations of fragmented protoplanetary disks around young stars and low occurrence rate of massive planets on very wide orbits. In this study, we present a SPHE… ▽ More The formation of giant planets has traditionally been divided into two pathways: core accretion and gravitational instability. However, in recent years, gravitational instability has become less favored, primarily due to the scarcity of observations of fragmented protoplanetary disks around young stars and low occurrence rate of massive planets on very wide orbits. In this study, we present a SPHERE/IRDIS polarized light observation of the young outbursting object V960 Mon. The image reveals a vast structure of intricately shaped scattered light with several spiral arms. This finding motivated a re-analysis of archival ALMA 1.3 mm data acquired just two years after the onset of the outburst of V960 Mon. In these data, we discover several clumps of continuum emission aligned along a spiral arm that coincides with the scattered light structure. We interpret the localized emission as fragments formed from a spiral arm under gravitational collapse. Estimating the mass of solids within these clumps to be of several Earth masses, we suggest this observation to be the first evidence of gravitational instability occurring on planetary scales. This study discusses the significance of this finding for planet formation and its potential connection with the outbursting state of V960 Mon. △ Less

Submitted 25 July, 2023; originally announced July 2023.

Comments: Published in ApJL. 11 pages, 4 figures. Images available as fits files at https://github.com/yemsnucleus/V960_Mon_ApJL

Approximation of almost diagonal non-linear maps by lattice Lipschitz operators

Authors: Roger Arnau, Jose M. Calabuig, Ezgi Erdoğan, Enrique A. Sánchez Pérez

Abstract: Lattice Lipschitz operators define a new class of nonlinear Banach-lattice-valued maps that can be written as diagonal functions with respect to a certain basis. In the $n-$dimensional case, such a map can be represented as a vector of size $n$ of real-valued functions of one variable. In this paper we develop a method to approximate almost diagonal maps by means of lattice Lipschitz operators. Th… ▽ More Lattice Lipschitz operators define a new class of nonlinear Banach-lattice-valued maps that can be written as diagonal functions with respect to a certain basis. In the $n-$dimensional case, such a map can be represented as a vector of size $n$ of real-valued functions of one variable. In this paper we develop a method to approximate almost diagonal maps by means of lattice Lipschitz operators. The proposed technique is based on the approximation properties and error bounds obtained for these operators, together with a pointwise version of the interpolation of McShane and Whitney extension maps that can be applied to almost diagonal functions. In order to get the desired approximation, it is necessary to previously obtain an approximation to the set of eigenvectors of the original function. We focus on the explicit computation of error formulas and on illustrative examples to present our construction. △ Less

Submitted 3 July, 2023; originally announced July 2023.

MSC Class: 47J10

Confirmation of the spectral excess in DAMIC at SNOLAB with skipper CCDs

Authors: A. Aguilar-Arevalo, I. Arnquist, N. Avalos, L. Barak, D. Baxter, X. Bertou, I. M. Bloch, A. M. Botti, M. Cababie, G. Cancelo, N. Castelló-Mor, B. A. Cervantes-Vergara, A. E. Chavarria, J. Cortabitarte-Gutiérrez, M. Crisler, J. Cuevas-Zepeda, A. Dastgheibi-Fard, C. De Dominicis, O. Deligny, A. Drlica-Wagner, J. Duarte-Campderros, J. C. D'Olivo, R. Essig, E. Estrada, J. Estrada , et al. (47 additional authors not shown)

Abstract: We present results from a 3.25 kg-day target exposure of two silicon charge-coupled devices (CCDs), each with 24 megapixels and skipper readout, deployed in the DAMIC setup at SNOLAB. With a reduction in pixel readout noise of a factor of 10 relative to the previous detector, we investigate the excess population of low-energy events in the CCD bulk previously observed above expected backgrounds. W… ▽ More We present results from a 3.25 kg-day target exposure of two silicon charge-coupled devices (CCDs), each with 24 megapixels and skipper readout, deployed in the DAMIC setup at SNOLAB. With a reduction in pixel readout noise of a factor of 10 relative to the previous detector, we investigate the excess population of low-energy events in the CCD bulk previously observed above expected backgrounds. We address the dominant systematic uncertainty of the previous analysis through a depth fiducialization designed to reject surface backgrounds on the CCDs. The measured bulk ionization spectrum confirms the presence of an excess population of low-energy events in the CCD target with characteristic rate of ${\sim}7$ events per kg-day and electron-equivalent energies of ${\sim}80~$eV, whose origin remains unknown. △ Less

Submitted 26 March, 2024; v1 submitted 2 June, 2023; originally announced June 2023.

Comments: 8 pages, 4 figures

Report number: FERMILAB-PUB-23-256-PPD

Journal ref: Phys. Rev. D 109, 062007 (2024)

Resolving the Binary Components of the Outbursting Protostar HBC 494 with ALMA

Authors: Pedro Henrique Nogueira, Alice Zurlo, Sebastián Pérez, Camilo González-Ruilova, Lucas A. Cieza, Antonio Hales, Trisha Bhowmik, Dary A. Ruíz-Rodríguez, David A. Principe, Gregory J. Herczeg, Jonathan P. Williams, Jorge Cuadra, Matías Montesinos, Nicolás Cuello, Prachi Chavan, Simon Casassus, Zhaohuan Zhu, Felipe G. Goicovic

Abstract: Episodic accretion is a low-mass pre-main sequence phenomenon characterized by sudden outbursts of enhanced accretion. These objects are classified into two: protostars with elevated levels of accretion that lasts for decades or more, called FUors, and protostars with shorter and repetitive bursts, called EXors. HBC 494 is a FUor object embedded in the Orion Molecular Cloud. Earlier Atacama Large… ▽ More Episodic accretion is a low-mass pre-main sequence phenomenon characterized by sudden outbursts of enhanced accretion. These objects are classified into two: protostars with elevated levels of accretion that lasts for decades or more, called FUors, and protostars with shorter and repetitive bursts, called EXors. HBC 494 is a FUor object embedded in the Orion Molecular Cloud. Earlier Atacama Large (sub-)Millimeter Array (ALMA) continuum observations showed an asymmetry in the disk at 0.''2 resolution. Here, we present follow-up observations at ~0.''03, resolving the system into two components: HBC 494 N (primary) and HBC 494 S (secondary). No circumbinary disk was detected. Both disks are resolved with a projected separation of ~0.''18 (75 au). Their projected dimensions are 84+/-1.8 x 66.9+/-1.5 mas for HBC 494 N and 64.6+/-2.5 x 46.0+/-1.9 mas for HBC 494 S. The disks are almost aligned and with similar inclinations. The observations show that the primary is ~5 times brighter/more massive and ~2 times bigger than the secondary. We notice that the northern component has a similar mass to the FUors, while the southern has to EXors. The HBC 494 disks show individual sizes that are smaller than single eruptive YSOs. In this work, we also report 12CO, 13CO, and C18O molecular line observations. At large scale, the 12CO emission shows bipolar outflows, while the 13CO and C18O maps show a rotating and infalling envelope around the system. At a smaller scale, the 12CO and 13CO moment zero maps show cavities within the continuum disks' area, which may indicate continuum over-subtraction or slow-moving jets and chemical destruction along the line-of-sight. △ Less

Submitted 26 June, 2023; v1 submitted 24 May, 2023; originally announced May 2023.

Comments: Published in MNRAS. Main text (11 pages, 8 figures). Appendix (11 pages, 9 figures). Total (22 pages, 17 figures)

Measuring Intersectional Biases in Historical Documents

Authors: Nadav Borenstein, Karolina Stańczak, Thea Rolskov, Natália da Silva Perez, Natacha Klein Käfer, Isabelle Augenstein

Abstract: Data-driven analyses of biases in historical texts can help illuminate the origin and development of biases prevailing in modern society. However, digitised historical documents pose a challenge for NLP practitioners as these corpora suffer from errors introduced by optical character recognition (OCR) and are written in an archaic language. In this paper, we investigate the continuities and tran… ▽ More Data-driven analyses of biases in historical texts can help illuminate the origin and development of biases prevailing in modern society. However, digitised historical documents pose a challenge for NLP practitioners as these corpora suffer from errors introduced by optical character recognition (OCR) and are written in an archaic language. In this paper, we investigate the continuities and transformations of bias in historical newspapers published in the Caribbean during the colonial era (18th to 19th centuries). Our analyses are performed along the axes of gender, race, and their intersection. We examine these biases by conducting a temporal study in which we measure the development of lexical associations using distributional semantics models and word embeddings. Further, we evaluate the effectiveness of techniques designed to process OCR-generated data and assess their stability when trained on and applied to the noisy historical newspapers. We find that there is a trade-off between the stability of the word embeddings and their compatibility with the historical dataset. We provide evidence that gender and racial biases are interdependent, and their intersection triggers distinct effects. These findings align with the theory of intersectionality, which stresses that biases affecting people with multiple marginalised identities compound to more than the sum of their constituents. △ Less

Submitted 21 May, 2023; originally announced May 2023.

Comments: Accepted to Findings of ACL2023

Multilingual Event Extraction from Historical Newspaper Adverts

Authors: Nadav Borenstein, Natalia da Silva Perez, Isabelle Augenstein

Abstract: NLP methods can aid historians in analyzing textual materials in greater volumes than manually feasible. Develo** such methods poses substantial challenges though. First, acquiring large, annotated historical datasets is difficult, as only domain experts can reliably label them. Second, most available off-the-shelf NLP models are trained on modern language texts, rendering them significantly les… ▽ More NLP methods can aid historians in analyzing textual materials in greater volumes than manually feasible. Develo** such methods poses substantial challenges though. First, acquiring large, annotated historical datasets is difficult, as only domain experts can reliably label them. Second, most available off-the-shelf NLP models are trained on modern language texts, rendering them significantly less effective when applied to historical corpora. This is particularly problematic for less well studied tasks, and for languages other than English. This paper addresses these challenges while focusing on the under-explored task of event extraction from a novel domain of historical texts. We introduce a new multilingual dataset in English, French, and Dutch composed of newspaper ads from the early modern colonial period reporting on enslaved people who liberated themselves from enslavement. We find that: 1) even with scarce annotated data, it is possible to achieve surprisingly good results by formulating the problem as an extractive QA task and leveraging existing datasets and models for modern languages; and 2) cross-lingual low-resource learning for historical languages is highly challenging, and machine translation of the historical datasets to the considered target languages is, in practice, often the best-performing solution. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Comments: Accepted to the main track of ACL2023

Auditing Cross-Cultural Consistency of Human-Annotated Labels for Recommendation Systems

Authors: Rock Yuren Pang, Jack Cenatempo, Franklyn Graham, Bridgette Kuehn, Maddy Whisenant, Portia Botchway, Katie Stone Perez, Allison Koenecke

Abstract: Recommendation systems increasingly depend on massive human-labeled datasets; however, the human annotators hired to generate these labels increasingly come from homogeneous backgrounds. This poses an issue when downstream predictive models -- based on these labels -- are applied globally to a heterogeneous set of users. We study this disconnect with respect to the labels themselves, asking whethe… ▽ More Recommendation systems increasingly depend on massive human-labeled datasets; however, the human annotators hired to generate these labels increasingly come from homogeneous backgrounds. This poses an issue when downstream predictive models -- based on these labels -- are applied globally to a heterogeneous set of users. We study this disconnect with respect to the labels themselves, asking whether they are ``consistently conceptualized'' across annotators of different demographics. In a case study of video game labels, we conduct a survey on 5,174 gamers, identify a subset of inconsistently conceptualized game labels, perform causal analyses, and suggest both cultural and linguistic reasons for cross-country differences in label annotation. We further demonstrate that predictive models of game annotations perform better on global train sets as opposed to homogeneous (single-country) train sets. Finally, we provide a generalizable framework for practitioners to audit their own data annotation processes for consistent label conceptualization, and encourage practitioners to consider global inclusivity in recommendation systems starting from the early stages of annotator recruitment and data-labeling. △ Less

Submitted 10 May, 2023; originally announced May 2023.

Comments: Accepted at FAccT 2023

Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies

Authors: James Paul Mason, Alexandra Werth, Colin G. West, Allison A. Youngblood, Donald L. Woodraska, Courtney Peck, Kevin Lacjak, Florian G. Frick, Moutamen Gabir, Reema A. Alsinan, Thomas Jacobsen, Mohammad Alrubaie, Kayla M. Chizmar, Benjamin P. Lau, Lizbeth Montoya Dominguez, David Price, Dylan R. Butler, Connor J. Biron, Nikita Feoktistov, Kai Dewey, N. E. Loomis, Michal Bodzianowski, Connor Kuybus, Henry Dietrick, Aubrey M. Wolfe , et al. (977 additional authors not shown)

Abstract: Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th… ▽ More Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 1,002 authors, 14 pages, 4 figures, 3 tables, published by The Astrophysical Journal on 2023-05-09, volume 948, page 71

SENSEI: Search for Millicharged Particles produced in the NuMI Beam

Authors: Liron Barak, Itay M. Bloch, Ana M. Botti, Mariano Cababie, Gustavo Cancelo, Luke Chaplinsky, Michael Crisler, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Erez Etzion, Guillermo Fernandez Moroni, Roni Harnik, Stephen E. Holland, Yaron Korn, Zhen Liu, Sravan Munagavalasa, Aviv Orly, Santiago E. Perez, Ryan Plestid, Dario Rodrigues, Nathan A. Saffold, Silvia Scorza, Aman Singal, Miguel Sofo Haro , et al. (6 additional authors not shown)

Abstract: Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisi… ▽ More Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisions of protons in the NuMI beam with a fixed graphite target. The absence of any ionization events with 3 to 6 electrons in the SENSEI data allow us to place world-leading constraints on millicharged particles for masses between 30 MeV to 380 MeV. This work also demonstrates the potential of utilizing low-threshold detectors to investigate new particles in beam-dump experiments, and motivates a future experiment designed specifically for this purpose. △ Less

Submitted 24 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Comments: 7 pages, 5 figures

Observations of planet forming disks in multiple stellar systems

Authors: Alice Zurlo, Raffaele Gratton, Sebastián Pérez, Lucas Cieza

Abstract: The demographic of circumstellar disks, the birthplaces of planets, is diverse and rich in disks featuring rings, gaps, spirals, filaments, and arcs. Many studies revealing these disk structures have focused on objects around single stars and disks in isolation. The scenario is more complex if binarity or multiplicity is involved; most stars are part of multiple systems in crowded star-forming reg… ▽ More The demographic of circumstellar disks, the birthplaces of planets, is diverse and rich in disks featuring rings, gaps, spirals, filaments, and arcs. Many studies revealing these disk structures have focused on objects around single stars and disks in isolation. The scenario is more complex if binarity or multiplicity is involved; most stars are part of multiple systems in crowded star-forming regions. How does the presence of one or more stellar companions affect the shape and size of the circumstellar disks? Here we review the landscape of results from optical, infrared, and (sub-) millimeter observations of the effects of multiplicity on protoplanetary disks, emphasizing the demographic studies of nearby molecular clouds and the high-resolution studies of multiple disk systems. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Comments: Invited review accepted in EPJ+

Inner edges of planetesimal belts: collisionally eroded or truncated?

Authors: Amaia Imaz Blanco, Sebastian Marino, Luca Matrà, Mark Booth, John Carpenter, Virginie Faramaz, Thomas Henning, A. Meredith Hughes, Grant M. Kennedy, Sebastián Pérez, Luca Ricci, Mark C. Wyatt

Abstract: The radial structure of debris discs can encode important information about their dynamical and collisional history. In this paper we present a 3-phase analytical model to analyse the collisional evolution of solids in debris discs, focusing on their joint radial and temporal dependence. Consistent with previous models, we find that as the largest planetesimals reach collisional equilibrium in the… ▽ More The radial structure of debris discs can encode important information about their dynamical and collisional history. In this paper we present a 3-phase analytical model to analyse the collisional evolution of solids in debris discs, focusing on their joint radial and temporal dependence. Consistent with previous models, we find that as the largest planetesimals reach collisional equilibrium in the inner regions, the surface density of dust and solids becomes proportional to $\sim r^{2}$ within a certain critical radius. We present simple equations to estimate the critical radius and surface density of dust as a function of the maximum planetesimal size and initial surface density in solids (and vice versa). We apply this model to ALMA observations of 7 wide debris discs. We use both parametric and non-parametric modelling to test if their inner edges are shallow and consistent with collisional evolution. We find that 4 out of 7 have inner edges consistent with collisional evolution. Three of these would require small maximum planetesimal sizes below 10 km, with HR 8799's disc potentially lacking solids larger than a few centimeters. The remaining systems have inner edges that are much sharper, which requires maximum planetesimal sizes $\gtrsim10$ km. Their sharp inner edges suggest they could have been truncated by planets, which JWST could detect. In the context of our model, we find that the 7 discs require surface densities below a Minimum Mass Solar Nebula, avoiding the so-called disc mass problem. Finally, during the modelling of HD 107146 we discover that its wide gap is split into two narrower ones, which could be due to two low-mass planets formed within the disc. △ Less

Submitted 16 May, 2023; v1 submitted 24 April, 2023; originally announced April 2023.

Comments: Accepted for publication in MNRAS, 21 pages, 11 figures

Searching for millicharged particles with 1 kg of Skipper-CCDs using the NuMI beam at Fermilab

Authors: Santiago Perez, Dario Rodrigues, Juan Estrada, Roni Harnik, Zhen Liu, Brenda A. Cervantes-Vergara, Juan Carlos D'Olivo, Ryan D. Plestid, Javier Tiffenberg, Tien-Tien Yu, Alexis Aguilar-Arevalo, Fabricio Alcalde-Bessia, Nicolas Avalos, Oscar Baez, Daniel Baxter, Xavier Bertou, Carla Bonifazi, Ana Botti, Gustavo Cancelo, Nuria Castelló-Mor, Alvaro E. Chavarria, Claudio R. Chavez, Fernando Chierchie, Juan Manuel De Egea, Cyrus Dreyer , et al. (35 additional authors not shown)

Abstract: Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab.… ▽ More Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab. mCPs would be produced at low energies through photon-mediated processes from decays of scalar, pseudoscalar, and vector mesons, or direct Drell-Yan productions. Estimates show that the OIT would be a world-leading probe for mCPs in the MeV mass range. △ Less

Submitted 2 December, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Comments: 13 pages, 10 figures

Scaling MadMiner with a deployment on REANA

Authors: Irina Espejo, Sinclert Pérez, Kenyi Hurtado, Lukas Heinrich, Kyle Cranmer

Abstract: MadMiner is a Python package that implements a powerful family of multivariate inference techniques that leverage matrix element information and machine learning. This multivariate approach neither requires the reduction of high-dimensional data to summary statistics nor any simplifications to the underlying physics or detector response. In this paper, we address some of the challenges arising fro… ▽ More MadMiner is a Python package that implements a powerful family of multivariate inference techniques that leverage matrix element information and machine learning. This multivariate approach neither requires the reduction of high-dimensional data to summary statistics nor any simplifications to the underlying physics or detector response. In this paper, we address some of the challenges arising from deploying MadMiner in a real-scale HEP analysis with the goal of offering a new tool in HEP that is easily accessible. The proposed approach encapsulates a typical MadMiner pipeline into a parametrized yadage workflow described in YAML files. The general workflow is split into two yadage sub-workflows, one dealing with the physics simulations and the other with the ML inference. After that, the workflow is deployed using REANA, a reproducible research data analysis platform that takes care of flexibility, scalability, reusability, and reproducibility features. To test the performance of our method, we performed scaling experiments for a MadMiner workflow on the National Energy Research Scientific Computer (NERSC) cluster with an HT-Condor back-end. All the stages of the physics sub-workflow had a linear dependency between resources or wall time and the number of events generated. This trend has allowed us to run a typical MadMiner workflow, consisting of 11M events, in 5 hours compared to days in the original study. △ Less

Submitted 12 April, 2023; originally announced April 2023.

Comments: To be published in proceedings of 21st International Workshop on Advanced Computing and Analysis Techniques in Physics Research

Skipper-CCD Sensors for the Oscura Experiment: Requirements and Preliminary Tests

Authors: Brenda A. Cervantes-Vergara, Santiago Perez, Juan Estrada, Ana Botti, Claudio R. Chavez, Fernando Chierchie, Nathan Saffold, Alexis Aguilar-Arevalo, Fabricio Alcalde-Bessia, Nicolás Avalos, Oscar Baez, Daniel Baxter, Xavier Bertou, Carla Bonifazi, Gustavo Cancelo, Nuria Castelló-Mor, Alvaro E. Chavarria, Juan Manuel De Egea, Juan Carlos D'Olivo, Cyrus Dreyer, Alex Drlica-Wagner, Rouven Essig, Ezequiel Estrada, Erez Etzion, Paul Grylls , et al. (30 additional authors not shown)

Abstract: Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal… ▽ More Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal region for the full 30 kg-year exposure, with a radiation background rate of 0.01 dru. In order to achieve this goal, Oscura must address each potential source of background events, including instrumental backgrounds. In this work, we discuss the main instrumental background sources and the strategy to control them, establishing a set of constraints on the sensors' performance parameters. We present results from the tests of the first fabricated Oscura prototype sensors, evaluate their performance in the context of the established constraints and estimate the Oscura instrumental background based on these results. △ Less

Submitted 11 April, 2024; v1 submitted 10 April, 2023; originally announced April 2023.

Journal ref: Journal of Instrumentation, Volume 18, August 2023

Adaptive weighting of Bayesian physics informed neural networks for multitask and multiscale forward and inverse problems

Authors: Sarah Perez, Suryanarayana Maddu, Ivo F. Sbalzarini, Philippe Poncet

Abstract: In this paper, we present a novel methodology for automatic adaptive weighting of Bayesian Physics-Informed Neural Networks (BPINNs), and we demonstrate that this makes it possible to robustly address multi-objective and multi-scale problems. BPINNs are a popular framework for data assimilation, combining the constraints of Uncertainty Quantification (UQ) and Partial Differential Equation (PDE). T… ▽ More In this paper, we present a novel methodology for automatic adaptive weighting of Bayesian Physics-Informed Neural Networks (BPINNs), and we demonstrate that this makes it possible to robustly address multi-objective and multi-scale problems. BPINNs are a popular framework for data assimilation, combining the constraints of Uncertainty Quantification (UQ) and Partial Differential Equation (PDE). The relative weights of the BPINN target distribution terms are directly related to the inherent uncertainty in the respective learning tasks. Yet, they are usually manually set a-priori, that can lead to pathological behavior, stability concerns, and to conflicts between tasks which are obstacles that have deterred the use of BPINNs for inverse problems with multi-scale dynamics. The present weighting strategy automatically tunes the weights by considering the multi-task nature of target posterior distribution. We show that this remedies the failure modes of BPINNs and provides efficient exploration of the optimal Pareto front. This leads to better convergence and stability of BPINN training while reducing sampling bias. The determined weights moreover carry information about task uncertainties, reflecting noise levels in the data and adequacy of the PDE model. We demonstrate this in numerical experiments in Sobolev training, and compare them to analytically $ε$-optimal baseline, and in a multi-scale Lokta-Volterra inverse problem. We eventually apply this framework to an inpainting task and an inverse problem, involving latent field recovery for incompressible flow in complex geometries. △ Less

Submitted 24 February, 2023; originally announced February 2023.

The ALMA view of MP Mus (PDS 66): a protoplanetary disk with no visible gaps down to 4 au scales

Authors: Á. Ribas, E. Macías, P. Weber, S. Pérez, N. Cuello, R. Dong, A. Aguayo, C. Cáceres, J. Carpenter, W. R. F. Dent, I. de Gregorio-Monsalvo, G. Duchêne, C. C. Espaillat, P. Riviere-Marichalar, M. Villenave

Abstract: We present ALMA multiwavelength observations of the protoplanetary disk around the nearby (d$\sim$100 pc) young solar analog MP Mus (PDS 66). These observations at 0.89 mm, 1.3 mm, and 2.2 mm have angular resolutions of $\sim$ 1", 0.05", and 0.25", respectively, and probe the dust and gas in the system with unprecedented detail and sensitivity. The disk appears smooth down to the 4 au resolution o… ▽ More We present ALMA multiwavelength observations of the protoplanetary disk around the nearby (d$\sim$100 pc) young solar analog MP Mus (PDS 66). These observations at 0.89 mm, 1.3 mm, and 2.2 mm have angular resolutions of $\sim$ 1", 0.05", and 0.25", respectively, and probe the dust and gas in the system with unprecedented detail and sensitivity. The disk appears smooth down to the 4 au resolution of the 1.3 mm observations, in contrast with most disks observed at comparable spatial scales. The dust disk has a radius of 60$\pm$5 au, a dust mass of $0.14_{-0.06}^{+0.11} M_{\rm Jup}$, and a mm spectral index $<2$ in the inner 30 au, suggesting optically thick emission from grains with high albedo in this region. Several molecular gas lines are also detected extending up to 130$\pm$15 au, similar to small grains traced by scattered light observations. Comparing the fluxes of different CO isotopologues with previous models yields a gas mass of $0.1-1 M_{\rm Jup}$, implying a gas to dust ratio of 1-10. We also measure a dynamical stellar mass of $M_{\rm dyn}$=1.30$\pm$0.08 $M_\odot$ and derive an age of 7-10 Myr for the system. The survival of large grains in an evolved disk without gaps/rings is surprising, and it is possible that existing substructures remain undetected due to optically thick emission at 1.3 mm. Alternatively, small structures may still remain unresolved with the current observations. Based on simple scaling relations for gap-opening planets and gap widths, this lack of substructures places upper limits to the masses of planets in the disk as low as 2 $M_\oplus$-0.06 $M_{\rm Jup}$ at $r > 40$ au. The lack of mm emission at radii $r > 60$ au also suggests that the gap in scattered light between 30-80 au is likely not a gap in the disk density, but a shadow cast by a puffed-up inner disk. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: 17 pages + 3 appendices. Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 673, A77 (2023)

Reinforcement Learning in System Identification

Authors: Jose Antonio Martin H., Oscar Fernandez Vicente, Sergio Perez, Anas Belfadil, Cristina Ibanez-Llano, Freddy Jose Perozo Rondon, Jose Javier Valle, Javier Arechalde Pelaz

Abstract: System identification, also known as learning forward models, transfer functions, system dynamics, etc., has a long tradition both in science and engineering in different fields. Particularly, it is a recurring theme in Reinforcement Learning research, where forward models approximate the state transition function of a Markov Decision Process by learning a map** function from current state and a… ▽ More System identification, also known as learning forward models, transfer functions, system dynamics, etc., has a long tradition both in science and engineering in different fields. Particularly, it is a recurring theme in Reinforcement Learning research, where forward models approximate the state transition function of a Markov Decision Process by learning a map** function from current state and action to the next state. This problem is commonly defined as a Supervised Learning problem in a direct way. This common approach faces several difficulties due to the inherent complexities of the dynamics to learn, for example, delayed effects, high non-linearity, non-stationarity, partial observability and, more important, error accumulation when using bootstrapped predictions (predictions based on past predictions), over large time horizons. Here we explore the use of Reinforcement Learning in this problem. We elaborate on why and how this problem fits naturally and sound as a Reinforcement Learning problem, and present some experimental results that demonstrate RL is a promising technique to solve these kind of problems. △ Less

Submitted 14 December, 2022; originally announced December 2022.

Comments: Accepted in Neurips Deep Reinforcement Learning Workshop 2022: https://openreview.net/forum?id=fGcbpWQIJZV

The SPHERE view of three interacting twin disc systems in polarised light

Authors: Philipp Weber, Sebastián Pérez, Greta Guidi, Nicolás T. Kurtovic, Alice Zurlo, Antonio Garufi, Paola Pinilla, Satoshi Mayama, Rob G. van Holstein, Cornelis P. Dullemond, Nicolás Cuello, David Principe, Lucas Cieza, Camilo González-Ruilova, Julien Girard

Abstract: Dense stellar environments as hosts of ongoing star formation increase the probability of gravitational encounters among stellar systems during the early stages of evolution. Stellar interaction may occur through non-recurring, hyperbolic or parabolic passages (a so-called 'fly-by'), through secular binary evolution, or through binary capture. In all three scenarios, the strong gravitational pertu… ▽ More Dense stellar environments as hosts of ongoing star formation increase the probability of gravitational encounters among stellar systems during the early stages of evolution. Stellar interaction may occur through non-recurring, hyperbolic or parabolic passages (a so-called 'fly-by'), through secular binary evolution, or through binary capture. In all three scenarios, the strong gravitational perturbation is expected to manifest itself in the disc structures around the individual stars. Here, we present near-infrared polarised light observations that were taken with the SPHERE/IRDIS instrument of three known interacting twin-disc systems: AS 205, EM* SR 24, and FU Orionis. The scattered light exposes spirals likely caused by the gravitational interaction. On a larger scale, we observe connecting filaments between the stars. We analyse their very complex polarised intensity and put particular attention to the presence of multiple light sources in these systems. The local angle of linear polarisation indicates the source whose light dominates the scattering process from the bridging region between the two stars. Further, we show that the polarised intensity from scattering with multiple relevant light sources results from an incoherent summation of the individuals' contribution. This can produce nulls of polarised intensity in an image, as potentially observed in AS 205. We discuss the geometry and content of the systems by comparing the polarised light observations with other data at similar resolution, namely with ALMA continuum and gas emission. Collective observational data can constrain the systems' geometry and stellar trajectories, with the important potential to differentiate between dynamical scenarios of stellar interaction. △ Less

Submitted 12 December, 2022; v1 submitted 25 November, 2022; originally announced November 2022.

Comments: 23 pages, 17 figures, accepted for publication in MNRAS

First results from a multiplexed and massive instrument with sub-electron noise Skipper-CCDs

Authors: F. Chierchie, C. R. Chavez, M. Sofo Haro, G. Fernandez Moroni, B. A. Cervantes-Vergara, S. Perez, J. Estrada, J. Tiffenberg, S. Uemura, A. Botti

Abstract: We present a new instrument composed of a large number of sub-electron noise Skipper-CCDs operated with a two stage analog multiplexed readout scheme suitable for scaling to thousands of channels. New, thick, $1.35$ Mpix sensors, from a new foundry, are glued into a Multi-Chip Module (MCM) printed circuit board on a ceramic substrate which has 16 sensors each. The instrument, that can hold up-to 1… ▽ More We present a new instrument composed of a large number of sub-electron noise Skipper-CCDs operated with a two stage analog multiplexed readout scheme suitable for scaling to thousands of channels. New, thick, $1.35$ Mpix sensors, from a new foundry, are glued into a Multi-Chip Module (MCM) printed circuit board on a ceramic substrate which has 16 sensors each. The instrument, that can hold up-to 16 MCMs, a total of 256 Skipper-CCD sensors (called a Super-Module with $\approx 130$ grams of active mass and $346$ Mpix), is part of the R$\&$D effort of the OSCURA experiment which will have $\approx 94$ super-modules. Experimental results with $10$ MCMs and $160$ Skipper-CCDs sensors are presented in this paper. This is already the largest ever build instrument with single electron sensitivity CCDs using nondestructive readout, both, in terms of active mass and number of channels. △ Less

Submitted 2 November, 2022; v1 submitted 28 October, 2022; originally announced October 2022.

Comments: Corrected minor typos

ALMA Observations of the HD~110058 debris disk

Authors: Antonio S. Hales, SebastiÁn Marino, Patrick D. Sheehan, Silvio Ulloa, SebastiÁn PÉrez, Luca MatrÀ, Quentin Kral, Mark Wyatt, William Dent, John Carpenter

Abstract: We present Atacama Large Millimeter Array (ALMA) observations of the young, gas-rich debris disk around HD110058 at 0.3-0.6\arcsec resolution. The disk is detected in the 0.85 and 1.3~mm continuum, as well as in the J=2-1 and J=3-2 transitions of $^{12}$CO and $^{13}$CO. The observations resolve the dust and gas distributions and reveal that this is the smallest debris disk around stars of similar… ▽ More We present Atacama Large Millimeter Array (ALMA) observations of the young, gas-rich debris disk around HD110058 at 0.3-0.6\arcsec resolution. The disk is detected in the 0.85 and 1.3~mm continuum, as well as in the J=2-1 and J=3-2 transitions of $^{12}$CO and $^{13}$CO. The observations resolve the dust and gas distributions and reveal that this is the smallest debris disk around stars of similar luminosity observed by ALMA. The new ALMA data confirm the disk is very close to edge-on, as shown previously in scattered light images. We use radiative transfer modeling to constrain the physical properties of dust and gas disks. The dust density peaks at around 31~au and has a smooth outer edge that extends out to $\sim70$~au. Interestingly, the dust emission is marginally resolved along the minor axis, which indicates that it is vertically thick if truly close to edge-on with an aspect ratio between 0.13 and 0.28. We also find that the CO gas distribution is more compact than the dust \ah{(similarly to the disk around 49 Ceti)}, which could be due to a low viscosity and a higher gas release rate at small radii. Using simulations of the gas evolution taking into account the CO photodissociation, shielding, and viscous evolution, we find that HD~110058's CO gas mass and distribution are consistent with a secondary origin scenario. Finally, we find that the gas densities may be high enough to cause the outward drift of small dust grains in the disk. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Skipper-CCDs: current applications and future

Authors: B. A. Cervantes-Vergara, S. Perez, J. C. D'Olivo, J. Estrada, D. J. Grimm, S. Holland, M. Sofo-Haro, W. Wong

Abstract: This work briefly discusses the potential applications of the Skipper-CCD technology in astronomy and reviews its current use in dark matter and neutrino experiments. An overview of the ongoing efforts to build multi-kilogram experiments with these sensors is given, in the context of the Oscura experiment. First results from the characterization of Oscura sensors from the first 200 mm wafer-fabric… ▽ More This work briefly discusses the potential applications of the Skipper-CCD technology in astronomy and reviews its current use in dark matter and neutrino experiments. An overview of the ongoing efforts to build multi-kilogram experiments with these sensors is given, in the context of the Oscura experiment. First results from the characterization of Oscura sensors from the first 200 mm wafer-fabrication run with a new vendor are presented. The overall yield of the electron counting capability of these sensors is 71%. A noise of 0.087 e$^-$ RMS, with 1225 samples/pix, and a dark current of (0.031$\pm$0.013) e$^-$/pix/day at 140 K were measured. △ Less

Submitted 10 August, 2022; originally announced August 2022.

The morphology of CSCha circumbinary disk suggesting the existence of a Saturn-mass planet

Authors: N. T. Kurtovic, P. Pinilla, Anna B. T. Penzlin, M. Benisty, L. Pérez, C. Ginski, A. Isella, W. Kley, F. Menard, S. Pérez, A. Bayo

Abstract: Planets have been detected in circumbinary orbits in several different systems, despite the additional challenges faced during their formation in such an environment. We investigate the possibility of planetary formation in the spectroscopic binary CS Cha by analyzing its circumbinary disk. The system was studied with high angular resolution ALMA observations at 0.87mm. Visibilities modeling and K… ▽ More Planets have been detected in circumbinary orbits in several different systems, despite the additional challenges faced during their formation in such an environment. We investigate the possibility of planetary formation in the spectroscopic binary CS Cha by analyzing its circumbinary disk. The system was studied with high angular resolution ALMA observations at 0.87mm. Visibilities modeling and Keplerian fitting are used to constrain the physical properties of CS Cha, and the observations were compared to hydrodynamic simulations. Our observations are able to resolve the disk cavity in the dust continuum emission and the 12CO J:3-2 transition. We find the dust continuum disk to be azimuthally axisymmetric (less than 9% of intensity variation along the ring) and of low eccentricity (of 0.039 at the peak brightness of the ring). Under certain conditions, low eccentricities can be achieved in simulated disks without the need of a planet, however, the combination of low eccentricity and axisymmetry is consistent with the presence of a Saturn-like planet orbiting near the edge of the cavity. △ Less

Submitted 9 June, 2022; originally announced June 2022.

Comments: 18 pages, 13 figures, accepted in A&A. Watch a 3min summary by the first author in https://youtu.be/6j5ROSj2N-U

Journal ref: A&A 664, A151 (2022)

CO Line Emission Surfaces and Vertical Structure in Mid-Inclination Protoplanetary Disks

Authors: Charles J. Law, Sage Crystian, Richard Teague, Karin I. Öberg, Evan A. Rich, Sean M. Andrews, Jaehan Bae, Kevin Flaherty, Viviana V. Guzmán, Jane Huang, John D. Ilee, Joel H. Kastner, Ryan A. Loomis, Feng Long, Laura M. Pérez, Sebastián Pérez, Chunhua Qi, Giovanni P. Rosotti, Dary Ruíz-Rodríguez, Takashi Tsukagoshi, David J. Wilner

Abstract: High spatial resolution CO observations of mid-inclination (30-75°) protoplanetary disks offer an opportunity to study the vertical distribution of CO emission and temperature. The asymmetry of line emission relative to the disk major axis allows for a direct map** of the emission height above the midplane, and for optically-thick, spatially-resolved emission in LTE, the intensity is a measure o… ▽ More High spatial resolution CO observations of mid-inclination (30-75°) protoplanetary disks offer an opportunity to study the vertical distribution of CO emission and temperature. The asymmetry of line emission relative to the disk major axis allows for a direct map** of the emission height above the midplane, and for optically-thick, spatially-resolved emission in LTE, the intensity is a measure of the local gas temperature. Our analysis of ALMA archival data yields CO emission surfaces, dynamically-constrained stellar host masses, and disk atmosphere gas temperatures for the disks around: HD 142666, MY Lup, V4046 Sgr, HD 100546, GW Lup, WaOph 6, DoAr 25, Sz 91, CI Tau, and DM Tau. These sources span a wide range in stellar masses (0.50-2.10 M$_{\odot}$), ages (${\sim}$0.3-23 Myr), and CO gas radial emission extents (${\approx}$200-1000 au). This sample nearly triples the number of disks with mapped emission surfaces and confirms the wide diversity in line emitting heights ($z/r\approx0.1$ to ${\gtrsim}0.5$) hinted at in previous studies. We compute radial and vertical CO gas temperature distributions for each disk. A few disks show local temperature dips or enhancements, some of which correspond to dust substructures or the proposed locations of embedded planets. Several emission surfaces also show vertical substructures, which all align with rings and gaps in the millimeter dust. Combining our sample with literature sources, we find that CO line emitting heights weakly decline with stellar mass and gas temperature, which, despite large scatter, is consistent with simple scaling relations. We also observe a correlation between CO emission height and disk size, which is due to the flared structure of disks. Overall, CO emission surfaces trace ${\approx}2$-$5\times$ gas pressure scale heights (H$_{\rm{g}}$) and could potentially be calibrated as empirical tracers of H$_{\rm{g}}$. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Comments: 31 pages, 17 figures, accepted for publication in ApJ. Image cubes available at https://zenodo.org/record/6410045

A Novel Probabilistic V2X Data Fusion Framework for Cooperative Perception

Authors: Mao Shan, Karan Narula, Stewart Worrall, Yung Fei Wong, Julie Stephany Berrio Perez, Paul Gray, Eduardo Nebot

Abstract: The paper addresses the vehicle-to-X (V2X) data fusion for cooperative or collective perception (CP). This emerging and promising intelligent transportation systems (ITS) technology has enormous potential for improving efficiency and safety of road transportation. Recent advances in V2X communication primarily address the definition of V2X messages and data dissemination amongst ITS stations (ITS-… ▽ More The paper addresses the vehicle-to-X (V2X) data fusion for cooperative or collective perception (CP). This emerging and promising intelligent transportation systems (ITS) technology has enormous potential for improving efficiency and safety of road transportation. Recent advances in V2X communication primarily address the definition of V2X messages and data dissemination amongst ITS stations (ITS-Ss) in a traffic environment. Yet, a largely unsolved problem is how a connected vehicle (CV) can efficiently and consistently fuse its local perception information with the data received from other ITS-Ss. In this paper, we present a novel data fusion framework to fuse the local and V2X perception data for CP that considers the presence of cross-correlation. The proposed approach is validated through comprehensive results obtained from numerical simulation, CARLA simulation, and real-world experimentation that incorporates V2X-enabled intelligent platforms. The real-world experiment includes a CV, a connected and automated vehicle (CAV), and an intelligent roadside unit (IRSU) retrofitted with vision and lidar sensors. We also demonstrate how the fused CP information can improve the awareness of vulnerable road users (VRU) for CV/CAV, and how this information can be considered in path planning/decision making within the CAV to facilitate safe interactions. △ Less

Submitted 31 March, 2022; originally announced March 2022.

Active Learning for Computationally Efficient Distribution of Binary Evolution Simulations

Authors: Kyle Akira Rocha, Jeff J. Andrews, Christopher P. L. Berry, Zoheyr Doctor, Aggelos K. Katsaggelos, Juan Gabriel Serra Pérez, Pablo Marchant, Vicky Kalogera, Scott Coughlin, Simone S. Bavera, Aaron Dotter, Tassos Fragos, Konstantinos Kovlakas, Devina Misra, Zepei Xing, Emmanouil Zapartas

Abstract: Binary stars undergo a variety of interactions and evolutionary phases, critical for predicting and explaining observed properties. Binary population synthesis with full stellar-structure and evolution simulations are computationally expensive requiring a large number of mass-transfer sequences. The recently developed binary population synthesis code POSYDON incorporates grids of MESA binary star… ▽ More Binary stars undergo a variety of interactions and evolutionary phases, critical for predicting and explaining observed properties. Binary population synthesis with full stellar-structure and evolution simulations are computationally expensive requiring a large number of mass-transfer sequences. The recently developed binary population synthesis code POSYDON incorporates grids of MESA binary star simulations which are then interpolated to model large-scale populations of massive binaries. The traditional method of computing a high-density rectilinear grid of simulations is not scalable for higher-dimension grids, accounting for a range of metallicities, rotation, and eccentricity. We present a new active learning algorithm, psy-cris, which uses machine learning in the data-gathering process to adaptively and iteratively select targeted simulations to run, resulting in a custom, high-performance training set. We test psy-cris on a toy problem and find the resulting training sets require fewer simulations for accurate classification and regression than either regular or randomly sampled grids. We further apply psy-cris to the target problem of building a dynamic grid of MESA simulations, and we demonstrate that, even without fine tuning, a simulation set of only $\sim 1/4$ the size of a rectilinear grid is sufficient to achieve the same classification accuracy. We anticipate further gains when algorithmic parameters are optimized for the targeted application. We find that optimizing for classification only may lead to performance losses in regression, and vice versa. Lowering the computational cost of producing grids will enable future versions of POSYDON to cover more input parameters while preserving interpolation accuracies. △ Less

Submitted 16 September, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 21 pages, 10 figures, ApJ in press

Journal ref: Astrophysical Journal; 938(1):64(15); 2022

The Oscura Experiment

Authors: Alexis Aguilar-Arevalo, Fabricio Alcalde Bessia, Nicolas Avalos, Daniel Baxter, Xavier Bertou, Carla Bonifazi, Ana Botti, Mariano Cababie, Gustavo Cancelo, Brenda Aurea Cervantes-Vergara, Nuria Castello-Mor, Alvaro Chavarria, Claudio R. Chavez, Fernando Chierchie, Juan Manuel De Egea, Juan Carlos D`Olivo, Cyrus E. Dreyer, Alex Drlica-Wagner, Rouven Essig, Juan Estrada, Ezequiel Estrada, Erez Etzion, Guillermo Fernandez-Moroni, Marivi Fernandez-Serra, Steve Holland , et al. (19 additional authors not shown)

Abstract: The Oscura experiment will lead the search for low-mass dark matter particles using a very large array of novel silicon Charge Coupled Devices (CCDs) with a threshold of two electrons and with a total exposure of 30 kg-yr. The R&D effort, which began in FY20, is currently entering the design phase with the goal of being ready to start construction in late 2024. Oscura will have unprecedented sensi… ▽ More The Oscura experiment will lead the search for low-mass dark matter particles using a very large array of novel silicon Charge Coupled Devices (CCDs) with a threshold of two electrons and with a total exposure of 30 kg-yr. The R&D effort, which began in FY20, is currently entering the design phase with the goal of being ready to start construction in late 2024. Oscura will have unprecedented sensitivity to sub-GeV dark matter particles that interact with electrons, probing dark matter-electron scattering for masses down to 500 keV and dark matter being absorbed by electrons for masses down to 1 eV. The Oscura R&D effort has made some significant progress on the main technical challenges of the experiment, of which the most significant are engaging new foundries for the fabrication of the CCD sensors, develo** a cold readout solution, and understanding the experimental backgrounds. △ Less

Submitted 23 February, 2022; v1 submitted 21 February, 2022; originally announced February 2022.

Dust entrainment in photoevaporative winds: Synthetic observations of transition disks

Authors: R. Franz, G. Picogna, B. Ercolano, S. Casassus, T. Birnstiel, Ch. Rab, S. Pérez

Abstract: X-ray- and extreme-ultraviolet- (XEUV-) driven photoevaporative winds acting on protoplanetary disks around young T-Tauri stars may strongly impact disk evolution, affecting both gas and dust distributions. We compute dust densities for the wind regions of XEUV-irradiated transition disks with gap sizes of 20 and 30 AU, and determine whether they can be observed at wavelengths… ▽ More X-ray- and extreme-ultraviolet- (XEUV-) driven photoevaporative winds acting on protoplanetary disks around young T-Tauri stars may strongly impact disk evolution, affecting both gas and dust distributions. We compute dust densities for the wind regions of XEUV-irradiated transition disks with gap sizes of 20 and 30 AU, and determine whether they can be observed at wavelengths $0.7 \lesssim λ_\mathrm{obs} [μ\mathrm{m}] \lesssim 1.8$ in scattered and polarised light with current instrumentation. For an XEUV-driven outflow around a $M_* = 0.7 \mathrm{M}_\odot$ T-Tauri star with $L_X = 2 \cdot 10^{30} \mathrm{erg/s}$, we find dust mass-loss rates $\dot{M}_\mathrm{dust} \lesssim 2.0 \cdot 10^{-3} \dot{M}_\mathrm{gas}$, and if we invoke vertical settling, the outflow is quite collimated. The synthesised images exhibit a distinct chimney-like structure. The relative intensity of these chimneys is low, but under optimal conditions, their detection may still be feasible with current instrumentation such as JWST NIRCam and SPHERE IRDIS. △ Less

Submitted 23 April, 2022; v1 submitted 28 January, 2022; originally announced January 2022.

Comments: Accepted for publication in A&A. 20+10 pages, 17+12 figures (References updated, minor adjustments.)

Journal ref: A&A 659, A90 (2022)

Homoclinic tangencies leading to robust heterodimensional cycles

Authors: Pablo G. Barrientos, Lorenzo J. Díaz, Sebastián A. Pérez

Abstract: We consider $C^r$ ($r\geqslant 1$) diffeomorphisms $f$ defined on manifolds of dimension $\geqslant 3$ with homoclinic tangencies associated to saddles. Under generic properties, we show that if the saddle is homoclinically related to a blender then the diffeomorphism $f$ can be {$C^r$} approximated by diffeomorphisms with {$C^1$} robust heterodimensional cycles. As an application, we show that th… ▽ More We consider $C^r$ ($r\geqslant 1$) diffeomorphisms $f$ defined on manifolds of dimension $\geqslant 3$ with homoclinic tangencies associated to saddles. Under generic properties, we show that if the saddle is homoclinically related to a blender then the diffeomorphism $f$ can be {$C^r$} approximated by diffeomorphisms with {$C^1$} robust heterodimensional cycles. As an application, we show that the classic Simon-Asaoka's examples of diffeomorphisms with $C^1$ robust homoclinic tangencies also display {$C^1$} robust heterodimensional cycles. In a second application, we consider homoclinic tangencies associated to hyperbolic sets. When the entropy of these sets is large enough we obtain $C^1$ robust cycles after $C^1$ perturbations. △ Less

Submitted 13 December, 2021; v1 submitted 9 December, 2021; originally announced December 2021.

Comments: 4 figures

MSC Class: 37C20; 37C29; 37D20; 37D30