-
Spectroscopic Investigation of Nebular Gas (SING): Instrument Design, Assembly and Calibration
Authors:
Bharat Chandra P,
Binukumar G. Nair,
Shubham Jankiram Ghatul,
Shubhangi Jain,
S. Sriram,
Mahesh Babu S.,
Rekhesh Mohan,
Margarita Safonova,
Jayant Murthy,
Mikhail Sachkov
Abstract:
The Spectroscopic Investigation of Nebular Gas (SING) is a near-ultraviolet (NUV) low-resolution spectrograph payload designed to operate in the NUV range, 1400 $\unicode{x212B}$ -- 2700 $\unicode{x212B}$, from a stable space platform. SING telescope has a primary aperture of 298 mm, feeding the light to the long-slit UV spectrograph. SING has a field of view (FOV) of 1$^{\circ}$, achieving a spat…
▽ More
The Spectroscopic Investigation of Nebular Gas (SING) is a near-ultraviolet (NUV) low-resolution spectrograph payload designed to operate in the NUV range, 1400 $\unicode{x212B}$ -- 2700 $\unicode{x212B}$, from a stable space platform. SING telescope has a primary aperture of 298 mm, feeding the light to the long-slit UV spectrograph. SING has a field of view (FOV) of 1$^{\circ}$, achieving a spatial resolution of 1.33 arc minute and spectral resolution of 3.7 $\unicode{x212B}$ ($R\sim600$) at the central wavelength. SING employs a micro-channel plate (MCP) with a CMOS readout-based photon-counting detector. The instrument is designed to observe diffuse sources such as nebulae, supernova remnants, and the interstellar medium (ISM) to understand their chemistry. SING was selected by the United Nations Office for Outer Space Affairs to be hosted on the Chinese Space Station. The instrument will undergo qualification tests as per the launch requirements. In this paper, we describe the hardware design, optomechanical assembly, and calibration of the instrument.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Development Of Raspberry Pi-based Processing Unit for UV Photon-Counting Detectors
Authors:
Bharat Chandra P,
Binukumar G.,
Shubham Janakiram,
Mahesh Babu,
Shubhangi Jain,
Richa Rai,
Rekhesh Mohan,
Margarita Safonova,
Jayant Murthy
Abstract:
In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detecto…
▽ More
In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detectors is resource-intensive and expensive. In this paper, we describe the development of a low-cost UV photon-counting detector processing unit that employs a Raspberry Pi with its in built readout to perform the photon-counting operation. Our system can operate in both 3x3 and 5x5 window modes at 30 frames per sec (fps), where 5x5 window mode also enables the provision of detection of double events. The system can be built quickly from readily available custom-off-the-shelf (COTS) components and is thus used in inexpensive CubeSats or small satellite missions. This low-cost solution promises to broaden access to UV observations, advancing research possibilities in space-based astronomy.
△ Less
Submitted 5 January, 2024; v1 submitted 2 January, 2024;
originally announced January 2024.
-
Low-Cost Raspberry Pi Star Sensor for Small Satellites
Authors:
Bharat Chandra P,
Mayuresh Sarpotdar,
Binukumar G. Nair,
Richa Rai,
Rekhesh Mohan,
Joice Mathew,
Margarita Safonova,
Jayant Murthy
Abstract:
We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in…
▽ More
We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in small satellite missions. StarberrySense is a configurable system -- it can operate as an imaging camera, a centroiding camera, or as a star sensor. We describe the algorithms implemented in the sensor, its assembly and calibration. This payload was selected by a recent Announcement of Opportunity call for payloads to fly on the PS4-Orbital Platform by the Indian Space Research Organization (ISRO).
△ Less
Submitted 13 July, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
