Showing 1–8 of 8 results for author: Ozelis, J

Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity

Authors: V. Chouhan, D. Bice, D. Burk, S. Chandrasekaran, A. Cravatta, P. Dubiel, G. V. Eremeev, F. Furuta, O. Melnychuk, A. Netepenko, M. K. Ng, J. Ozelis, H. Park, T. Ring, G. Wu, B. Guilfoyle, M. P. Kelly, T. Reid

Abstract: Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param… ▽ More Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: SRF2023

Report number: FERMILAB-CONF-23-274-TD

Impact of Solenoid Induced Residual Magnetic Fields on The Prototype SSR1 CM Performance

Authors: D. Passarelli, J. Bernardini, C. Boffo, S. Chandrasekaran, A. Hogberg, T. Khabiboulline, J. Ozelis, M. Parise, V. Roger, G. Romanov, A. Sukhanov, G. Wu, V. Yakovlev, Y. Xie

Abstract: A prototype cryomodule containing eight Single Spoke Resonators type-1 (SSR1) operating at 325 MHz and four superconducting focusing lenses was successfully assembled, cold tested, and accelerated beam in the framework of the PIP-II project at Fermilab. The impact of induced residual magnetic fields from the solenoids on performance of cavities is presented in this contribution. In addition, desig… ▽ More A prototype cryomodule containing eight Single Spoke Resonators type-1 (SSR1) operating at 325 MHz and four superconducting focusing lenses was successfully assembled, cold tested, and accelerated beam in the framework of the PIP-II project at Fermilab. The impact of induced residual magnetic fields from the solenoids on performance of cavities is presented in this contribution. In addition, design optimizations for the production cryomodules as a result of this impact are highlighted. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: SRF2023 Conference

Report number: FERMILAB-CONF-23-338-TD

Installation, commissioning, and testing of the HB650 CM at PIP2IT

Authors: M White, J Makara, S Ranpariya, L Pei, M Barba, J Subedi, J Dong, B Hansen, A E T Akintola, J Holzbauer, J Ozelis, S Chandrasekaran, V Roger

Abstract: The Proton Improvement Plan-II (PIP-II) is a major upgrade to the Fermilab accelerator complex, featuring a new 800-MeV Superconducting Radio-Frequency (SRF) linear accelerator (LINAC) powering the accelerator complex to provide the world's most intense high-energy neutrino beam. This paper describes the conversion of the PIP-II Injector Test Facility (PIP2IT) cryogenic system into a test stand fo… ▽ More The Proton Improvement Plan-II (PIP-II) is a major upgrade to the Fermilab accelerator complex, featuring a new 800-MeV Superconducting Radio-Frequency (SRF) linear accelerator (LINAC) powering the accelerator complex to provide the world's most intense high-energy neutrino beam. This paper describes the conversion of the PIP-II Injector Test Facility (PIP2IT) cryogenic system into a test stand for PIP-II High-Beta 650 MHz (HB650) cryomodules at Fermilab's Cryomodule Test Facility (CMTF). A description of the associated mechanical, electrical, and controls modifications necessary for testing HB650 cryomodules are provided. The cooldown and warmup requirements, procedures and associated controls logic is described. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: 2023 Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC)

Report number: FERMILAB-CONF-23-359-TD

The Evaluation of Mechanical Properties of LB650 Cavities

Authors: J. Holzbauer, G. Wu, H. Park, K. McGee, A. Wixson, T. Khabiboulline, G. Romanov, S. Adams, D. Bice, S. K. Chandrasekaran, J. Ozelis, I. Gonin, C. Narug, R. Thiede, R. Treece, C. Grimm

Abstract: The PIP-II project's LB650 cavities could potentially be vulnerable to mechanical deformation because of the geometric shape of the cavity due to reduced beta. The mechanical property of the niobium half-cell was measured following various heat treatments. The 5-cell cavities were tested in a controlled drop test fashion and the real-world road test. The result showed that the 900 $°$C heat treatm… ▽ More The PIP-II project's LB650 cavities could potentially be vulnerable to mechanical deformation because of the geometric shape of the cavity due to reduced beta. The mechanical property of the niobium half-cell was measured following various heat treatments. The 5-cell cavities were tested in a controlled drop test fashion and the real-world road test. The result showed that the 900 $°$C heat treatment was compatible with cavity handling and transportation during production. The test provides the bases of the transportation specification and ship** container design guidelines. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 21st International Conference on Radio-Frequency Superconductivity (SRF 2023)

Report number: FERMILAB-CONF-23-333-PIP2-TD

Design, Manufacturing, Assembly, Testing, And Lessons Learned Of The Prototype 650 Mhz Couplers

Authors: J. Helsper, S. Chandrasekaran, N. Solyak, S. Kazakov, K. Premo, G. Wu, F. Furuta, J. Ozelis, B. Hanna

Abstract: Six 650 MHz high-power couplers will be integrated into the prototype High Beta 650 MHz (HB650) cryomodule for the PIP-II project at Fermilab. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life-cycle, including manufacturing, assembly, testing, conditioning, and the lessons learned at each stage. Six 650 MHz high-power couplers will be integrated into the prototype High Beta 650 MHz (HB650) cryomodule for the PIP-II project at Fermilab. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life-cycle, including manufacturing, assembly, testing, conditioning, and the lessons learned at each stage. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Report number: FERMILAB-CONF-22-641-TD

Commissioning And First Results From The Fermilab Cryomodule Test Stand

Authors: E. R. Harms, M. Awida, C. Baffes, K. Carlson, S. Chandrasekaran, B. Chase, E. Cullerton, J. Edelen, J. Einstein-Curtis, C. Ginsburg, A. Grassellino, B. Hansen, J. Holzbauer, S. Kazakov, T. Khabiboulline, M. Kucera, J. Leibfritz, A. Lunin, D. McDowell, M. McGee, D. Nicklaus, D. Orris, J. Ozelis, J. Patrick, T. Petersen , et al. (12 additional authors not shown)

Abstract: A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overv… ▽ More A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: 4 pp. Proceedings of LINAC2016, East Lansing, MI, USA

Report number: Fermilab-Conf-16-744-AD-APC-TD

High Gradient Tests of the Fermilab SSR1 Cavity

Authors: T. Khabiboulline, C. M. Ginsburg, I. Gonin, R. Madrak, O. Melnychuk, J. Ozelis, Y. Pischalnikov, L. Ristori, A. Rowe, D. A. Sergatskov, A. Sukhanov, I. Terechkine, R. Wagner, R. Webber, V. Yakovlev

Abstract: In Fermilab we are build and tested several superconducting Single Spoke Resonators (SSR1, β=0.22) which can be used for acceleration of low beta ions. Fist two cavities performed very well during cold test in Vertical Test Station at FNAL. One dressed cavity was also tested successfully in Horizontal Test Station. Currently we are building 8 cavity cryomodule for PIXIE project. Additional 10 cavi… ▽ More In Fermilab we are build and tested several superconducting Single Spoke Resonators (SSR1, β=0.22) which can be used for acceleration of low beta ions. Fist two cavities performed very well during cold test in Vertical Test Station at FNAL. One dressed cavity was also tested successfully in Horizontal Test Station. Currently we are building 8 cavity cryomodule for PIXIE project. Additional 10 cavities were manufactured in the industry and on-going cold test results will be presented in this poster. △ Less

Submitted 23 January, 2013; originally announced January 2013.

Comments: 3 pp. 3rd International Particle Accelerator Conference (IPAC 2012) 20-25 May 2012, New Orleans, Louisiana

Report number: FERMILAB-CONF-12-183-AD-TD

Investigations of surface quality and SRF cavity performance

Authors: G. Wu, M. Ge, P. Kneisel, K. Zhao, J. Ozelis, D. Sergatskov, C. Cooper

Abstract: Magnetic field enhancement has been studied in the past through replica and cavity cutting. Considerable progress of niobium cavity manufacturing and processing has been made since then. Wide variety of single cell cavities has been analyzed through replica technique. Their RF performances were compared in corresponding to geometric RF surface quality. It is concluded that the surface roughness af… ▽ More Magnetic field enhancement has been studied in the past through replica and cavity cutting. Considerable progress of niobium cavity manufacturing and processing has been made since then. Wide variety of single cell cavities has been analyzed through replica technique. Their RF performances were compared in corresponding to geometric RF surface quality. It is concluded that the surface roughness affects cavity performance mostly in secondary role. The other factors must have played primary role in cavity performance limitations. △ Less

Submitted 27 June, 2012; originally announced June 2012.

Comments: 4 pp. Applied Superconductivity Conference (ASC 2010) 1-6 Aug 2010. Washington, D.C

Report number: FERMILAB-CONF-10-430-TD