-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Effective Ex-Situ Fabrication of F-Doped SmFeAsO Wire for High Transport Critical Current Density
Authors:
Masaya Fujioka,
Tomohiro Kota,
Masanori Matoba,
Toshinori Ozaki,
Yoshihiko Takano,
Hiroaki Kumakura,
Yoichi Kamihara
Abstract:
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the…
▽ More
We demonstrate the fabrication of superconducting SmFeAsO1-xFx (Sm-1111) wires by using the ex-situ powder-in-tube technique. Sm-1111 powder and a binder composed of SmF3, samarium arsenide, and iron arsenide were used to synthesize the superconducting core. Although the F content of Sm-1111 is reduced in the process of ex-situ fabrication, the binder compensates by sufficiently supplementing the F content, thereby preventing a decrease in the superconducting transition temperature and a shrinkage of the superconducting volume fraction. Thus, in the superconducting Sm-1111 wire with the binder, the transport critical current density reaches the highest value of ~4 kA/cm2 at 4.2 K.
△ Less
Submitted 28 June, 2011; v1 submitted 17 May, 2011;
originally announced May 2011.
-
Fabrication of binary FeSe superconducting wires by novel diffusion process
Authors:
Toshinori Ozaki,
Keita Deguchi,
Yoshikazu Mizuguchi,
Yasuna Kawasaki,
Takayoshi Tanaka,
Takahide Yamaguchi,
Hiroaki Kumakura,
Yoshihiko Takano
Abstract:
We report successful fabrication of multi- and mono-core FeSe wires with high transport critical current density Jc using a simple in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The seven-core wire showed transport Jc of as high as 1027 A/cm2 at 4.2 K. The superconducting transition temperature Tczero was observed at 10.5 K in the wire-samples, which is about 2…
▽ More
We report successful fabrication of multi- and mono-core FeSe wires with high transport critical current density Jc using a simple in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The seven-core wire showed transport Jc of as high as 1027 A/cm2 at 4.2 K. The superconducting transition temperature Tczero was observed at 10.5 K in the wire-samples, which is about 2 K higher than that of bulk FeSe. The Fe-diffusion PIT method is suitable for fabricating multi-core wires of the binary FeSe superconductors with superior properties.
△ Less
Submitted 16 June, 2012; v1 submitted 18 March, 2011;
originally announced March 2011.
-
Transport properties and microstructure of mono- and seven-core wires of FeSe1-xTex superconductor by Fe-diffusion powder-in-tube method
Authors:
Toshinori Ozaki,
Keita Deguchi,
Yoshikazu Mizuguchi,
Yasuna Kawasaki,
Takayoshi Tanaka,
Takahide Yamaguchi,
Shunsuke Tsuda,
Hiroaki Kumakura,
Yoshihiko Takano
Abstract:
We report the successful fabrication of mono- and seven-core superconducting wires of FeSe1-xTex using an in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The reacted layer in these wires were found to have composite structure with composition nearly FeSe and FeTe for the inner and outer layers, although a single layer of composition FeSe0.5Te0.5 was supposed to…
▽ More
We report the successful fabrication of mono- and seven-core superconducting wires of FeSe1-xTex using an in-situ Fe-diffusion process based on the powder-in-tube (Fe-diffusion PIT) method. The reacted layer in these wires were found to have composite structure with composition nearly FeSe and FeTe for the inner and outer layers, although a single layer of composition FeSe0.5Te0.5 was supposed to be formed. The self-field transport Jc values at 4.2 K were found to be 226.2 A/cm2 and 100.3 A/cm2 respectively for mono- and seven-core wires. The Jc's of mono- and seven-core wires dropped rapidly at low fields and then showed a gradual decrease with increasing magnetic fields. In addition, the seven-core wire showed higher Jc than the mono-core wire under higher magnetic fields, indicating that the seven-core wire of FeSe1-xTex superconductor using Fe-diffusion PIT method is advantageous for the superconducting-wire application under high magnetic fields.
△ Less
Submitted 18 December, 2011; v1 submitted 2 March, 2011;
originally announced March 2011.
-
Pressure study of the new iron-based superconductor K0.8Fe2Se2
Authors:
Y. Kawasaki,
Y. Mizuguchi,
K. Deguchi,
T. Watanabe,
T. Ozaki,
S. Tsuda,
T. Yamaguchi,
Hiroyuki Takeya,
Y. Takano
Abstract:
We investigated pressure effects on transition temperature (Tc) of the new iron-based superconductor K0.8Fe2Se2 using a BeCu/NiCrAl hybrid-type clamped piston-cylinder cell. The Tc(onset) was 33K at 0.85 GPa. With increasing pressure, Tc(onset) gradually increased and reached 36.6 K at 2.03 GPa.
We investigated pressure effects on transition temperature (Tc) of the new iron-based superconductor K0.8Fe2Se2 using a BeCu/NiCrAl hybrid-type clamped piston-cylinder cell. The Tc(onset) was 33K at 0.85 GPa. With increasing pressure, Tc(onset) gradually increased and reached 36.6 K at 2.03 GPa.
△ Less
Submitted 5 January, 2011;
originally announced January 2011.
-
Transport properties of the new Fe-based superconductor KxFe2Se2 (Tc = 33 K)
Authors:
Yoshikazu Mizuguchi,
Hiroyuki Takeya,
Yasuna Kawasaki,
Toshinori Ozaki,
Shunsuke Tsuda,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We synthesized the new Fe-based superconductor K0.8Fe2Se2 single crystals. The obtained single crystal exhibited a sharp superconducting transition, and the onset and zero-resistivity temperature was estimated to be 33 and 31.8 K, respectively. A high upper critical field of 192 T was obtained. Anisotropy of superconductivity of K0.8Fe2Se2 was ~3.6. Both the high upper critical field and comparabl…
▽ More
We synthesized the new Fe-based superconductor K0.8Fe2Se2 single crystals. The obtained single crystal exhibited a sharp superconducting transition, and the onset and zero-resistivity temperature was estimated to be 33 and 31.8 K, respectively. A high upper critical field of 192 T was obtained. Anisotropy of superconductivity of K0.8Fe2Se2 was ~3.6. Both the high upper critical field and comparably low anisotropy are advantageous for the application under high magnetic field.
△ Less
Submitted 22 December, 2010;
originally announced December 2010.
-
Microstructure and transport properties of FeTe0.5Se0.5 superconducting wires fabricated by ex-situ Powder-in-tube process
Authors:
T. Ozaki,
K. Deguchi,
Y. Mizuguchi,
H. Kumakura,
Y. Takano
Abstract:
We fabricated FeTe0.5Se0.5 superconducting wires using ex-situ Powder-in-tube method with an Fe sheath. It was amazing that superconducting current was observed in the as-drawn wire without any heat treatments. By heat treatment at 200C for 2 hours, Tczero and Jc at 4.2 K were enhanced up to 9.1 K and 64.1 A/cm2 (Ic = 182.6 mA), respectively. Furthermore, the Jc of FeTe0.5Se0.5 wire heat treated a…
▽ More
We fabricated FeTe0.5Se0.5 superconducting wires using ex-situ Powder-in-tube method with an Fe sheath. It was amazing that superconducting current was observed in the as-drawn wire without any heat treatments. By heat treatment at 200C for 2 hours, Tczero and Jc at 4.2 K were enhanced up to 9.1 K and 64.1 A/cm2 (Ic = 182.6 mA), respectively. Furthermore, the Jc of FeTe0.5Se0.5 wire heat treated at 200C for 2 hours was not much sensitive to the applied magnetic fields. Therefore, FeTe0.5Se0.5 wires have a great potential for applications.
△ Less
Submitted 18 December, 2011; v1 submitted 7 December, 2010;
originally announced December 2010.
-
Anisotropic ultrafast electron dynamics induced by high-field terahertz pulses in n-doped InGaAs
Authors:
F. Blanchard,
D. Golde,
F. H. Su,
L. Razzari,
G. Sharma,
R. Morandotti,
T. Ozaki,
M. Reid,
M. Kira,
S. W. Koch,
F. A. Hegmann
Abstract:
The anisotropic effective mass of electrons is directly measured using time-resolved THz- pump/THz-probe techniques in a n-doped InGaAs semiconductor thin film. A microscopic theory is used to attribute this anisotropy in the THz probe transmission to the nonparabolicity of the conduction band. Self-consistent light-matter coupling is shown to contribute significantly to the THz response.
The anisotropic effective mass of electrons is directly measured using time-resolved THz- pump/THz-probe techniques in a n-doped InGaAs semiconductor thin film. A microscopic theory is used to attribute this anisotropy in the THz probe transmission to the nonparabolicity of the conduction band. Self-consistent light-matter coupling is shown to contribute significantly to the THz response.
△ Less
Submitted 15 November, 2010;
originally announced November 2010.
-
Phase Separation in Bose-Bose Mixtures in an Optical Lattice
Authors:
Takeshi Ozaki,
Tetsuro Nikuni
Abstract:
We study the ground-state properties of mixtures of strongly interacting bosonic atoms in an optical lattice. Applying a mean-field approximation to the Hubbard model for Bose-Bose mixtures, we calculate the densities and superfluid order parameters for both species. Due to the repulsive interaction between the two species, the system exhibits phase separation. First, in the extreme limit of the z…
▽ More
We study the ground-state properties of mixtures of strongly interacting bosonic atoms in an optical lattice. Applying a mean-field approximation to the Hubbard model for Bose-Bose mixtures, we calculate the densities and superfluid order parameters for both species. Due to the repulsive interaction between the two species, the system exhibits phase separation. First, in the extreme limit of the zero-hop** case, we derive analytical expressions for the phase boundaries. In particular, we derive the conditions for phase separation in the Mott insulator phase. We find that the conditions for the phase separation depend on the on-site interactions as well as the occupation numbers. In particular, we show that the coexisting state appears by varying the on-site inter-species interaction. We also show the phase diagram of the finite hop** case. Second, we calculate the spatial density profile of $^{87}$Rb-$^{41}$K mixtures in the combined potential of a parabolic trap and an optical lattice using the local density approximation. We fixed the number of $^{87}$Rb and varied the number of $^{41}$K, and used the parameters estimated by experiments. We show that the phase separated $^{87}$Rb-$^{41}$K mixtures distribute like in a parabolic trap case. Furthermore, we find that phase separated mixtures distribute a nesting structure.
△ Less
Submitted 21 October, 2010;
originally announced October 2010.
-
Superconductivity in oxygen-annealed FeTe1-xSx single crystal
Authors:
Yoshikazu Mizuguchi,
Keita Deguchi,
Yasuna Kawasaki,
Toshinori Ozaki,
Masanori Nagao,
Shunsuke Tsuda,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We investigated the S-do**-driven phase transition from antiferromagnetic to superconducting in FeTe1-xSx single crystals. The partial substitution of Te by S suppresses antiferromagnetism in Fe-square lattice. Superconductivity is induced by oxygen annealing for only FeTe1-xSx in which the long-range magnetic ordering is suppressed. To realize superconductivity in FeTe1-xSx, both S concentratio…
▽ More
We investigated the S-do**-driven phase transition from antiferromagnetic to superconducting in FeTe1-xSx single crystals. The partial substitution of Te by S suppresses antiferromagnetism in Fe-square lattice. Superconductivity is induced by oxygen annealing for only FeTe1-xSx in which the long-range magnetic ordering is suppressed. To realize superconductivity in FeTe1-xSx, both S concentration enough to suppress antiferromagnetism and oxygen annealing are required. Anisotropy of superconductivity in oxygen-annealed FeTe0.886S0.114 was estimated to be 1.17.
△ Less
Submitted 16 September, 2010;
originally announced September 2010.
-
Design and performance of the muon monitor for the T2K neutrino oscillation experiment
Authors:
K. Matsuoka,
A. K. Ichikawa,
H. Kubo,
K. Maeda,
T. Maruyama,
C. Matsumura,
A. Murakami,
T. Nakaya,
K. Nishikawa,
T. Ozaki,
K. Sakashita,
K. Suzuki,
S. Y. Suzuki,
K. Tashiro,
K. Yamamoto,
M. Yokoyama
Abstract:
This article describes the design and performance of the muon monitor for the T2K (Tokaito-Kamioka) long baseline neutrino oscillation experiment. The muon monitor consists of two types of detector arrays: ionization chambers and silicon PIN photodiodes. It measures the intensity and profile of muons produced, along with neutrinos, in the decay of pions. The measurement is sensitive to the intensi…
▽ More
This article describes the design and performance of the muon monitor for the T2K (Tokaito-Kamioka) long baseline neutrino oscillation experiment. The muon monitor consists of two types of detector arrays: ionization chambers and silicon PIN photodiodes. It measures the intensity and profile of muons produced, along with neutrinos, in the decay of pions. The measurement is sensitive to the intensity and direction of the neutrino beam. The linearity and stability of the detectors were measured in beam tests to be within 2.4% and 1.5%, respectively. Based on the test results, the precision of the beam direction measured by the muon monitor is expected to be 0.25 mrad.
△ Less
Submitted 30 September, 2010; v1 submitted 24 August, 2010;
originally announced August 2010.
-
Single crystal growth and structural characterization of FeTe1-xSx
Authors:
Yoshikazu Mizuguchi,
Keita Deguchi,
Toshinori Ozaki,
Masanori Nagao,
Shunsuke Tsuda,
Takahide Yamaguchi,
Yoshihiko Takano
Abstract:
We have synthesized single crystals of FeTe1-xSx and investigated the structural and physical properties. The actual S concentration was found to be significantly smaller than the starting nominal value. The solubility limit of S for the Te site for the crystals grown using a self-flux method was estimated to be around 12 %. Although a suppression of antiferromagnetic transition was observed by S…
▽ More
We have synthesized single crystals of FeTe1-xSx and investigated the structural and physical properties. The actual S concentration was found to be significantly smaller than the starting nominal value. The solubility limit of S for the Te site for the crystals grown using a self-flux method was estimated to be around 12 %. Although a suppression of antiferromagnetic transition was observed by S substitution, bulk superconductivity was not observed. A phase diagram of as-grown FeTe1-xSx single crystal was established on the basis of the structural and physical properties.
△ Less
Submitted 11 October, 2010; v1 submitted 15 August, 2010;
originally announced August 2010.
-
Transport properties of iron-based FeTe0.5Se0.5 superconducting wire
Authors:
T. Ozaki,
K. Deguchi,
Y. Mizuguchi,
H. Kumakura,
Y. Takano
Abstract:
FeTe0.5Se0.5 superconducting wires have been fabricated using ex-situ PIT method with an Fe sheath. Among the other FeAs-based superconductor, FeTe0.5Se0.5 has great advantage for application due to binary composition and less toxic. Surprisingly, superconducting current was observed in the as-fabricated wire without any heat treatments. Zero resistivity and transport critical current density (Jc)…
▽ More
FeTe0.5Se0.5 superconducting wires have been fabricated using ex-situ PIT method with an Fe sheath. Among the other FeAs-based superconductor, FeTe0.5Se0.5 has great advantage for application due to binary composition and less toxic. Surprisingly, superconducting current was observed in the as-fabricated wire without any heat treatments. Zero resistivity and transport critical current density (Jc) were 3.2 K and 2.8 A/cm2, respectively. In addition, by annealing at 200 degC for 2 h, critical temperature Tczero and Jc were enhanced up to 9.1 K, and 64.1 A/cm2, respectively. This suggests that the grain connectivity was improved by heat treatment, and superconducting property of FeTe0.5Se0.5 wire was enhanced.
△ Less
Submitted 18 December, 2011; v1 submitted 8 August, 2010;
originally announced August 2010.
-
Alcoholic beverages induce superconductivity in FeTe$_{1-x}$S$_x$
Authors:
K Deguchi,
Y Mizuguchi,
Y Kawasaki,
T Ozaki,
S Tsuda,
T Yamaguchi,
Y Takano
Abstract:
We found that hot alcoholic beverages were effective in inducing superconductivity in FeTe$_{0.8}$S0$_{.2}$. Heating FeTe$_{0.8}$S0$_{.2}$ compound in various alcoholic beverages enhances the superconducting properties compared to pure water-ethanol mixture as a control. Heating with red wine for 24 hours leads to the largest shielding volume fraction of 62.4% and the highest zero resistivity temp…
▽ More
We found that hot alcoholic beverages were effective in inducing superconductivity in FeTe$_{0.8}$S0$_{.2}$. Heating FeTe$_{0.8}$S0$_{.2}$ compound in various alcoholic beverages enhances the superconducting properties compared to pure water-ethanol mixture as a control. Heating with red wine for 24 hours leads to the largest shielding volume fraction of 62.4% and the highest zero resistivity temperature of 7.8 K. Some components present in alcoholic beverages, other than water and ethanol, have the ability to induce superconductivity in FeTe$_{0.8}$S0$_{.2}$ compound.
△ Less
Submitted 4 February, 2011; v1 submitted 3 August, 2010;
originally announced August 2010.
-
Numerically exact O($N^{7/3}$) method for large-scale electronic structure calculations
Authors:
Taisuke Ozaki
Abstract:
An efficient low-order scaling method is presented for large-scale electronic structure calculations based on the density functional theory using localized basis functions, which directly computes selected elements of the density matrix by a contour integration of the Green function evaluated with a nested dissection approach for resultant sparse matrices. The computational effort of the method sc…
▽ More
An efficient low-order scaling method is presented for large-scale electronic structure calculations based on the density functional theory using localized basis functions, which directly computes selected elements of the density matrix by a contour integration of the Green function evaluated with a nested dissection approach for resultant sparse matrices. The computational effort of the method scales as O($N(\log_2N)^2$), O($N^{2}$), and O($N^{7/3}$) for one, two, and three dimensional systems, respectively, where $N$ is the number of basis functions. Unlike O($N$) methods developed so far the approach is a numerically exact alternative to conventional O($N^{3}$) diagonalization schemes in spite of the low-order scaling, and can be applicable to not only insulating but also metallic systems in a single framework. It is also demonstrated that the nested algorithm and the well separated data structure are suitable for the massively parallel computation, which enables us to extend the applicability of density functional calculations for large-scale systems together with the low-order scaling.
△ Less
Submitted 1 May, 2010;
originally announced May 2010.
-
Semianalytical treatment of current density of particles injected by a monoenergetic source
Authors:
P. R. Goncharov,
B. V. Kuteev,
V. Yu. Sergeev,
T. Ozaki,
S. Sudo
Abstract:
This paper extends the semianalytical treatment of fast ion current density to take into account time dependence and velocity diffusion using solutions of Boltzmann equation with a complete Coulomb collision term (Goncharov et al. 2010 Phys. Plasmas 17 112313). An arbitrary angle distribution of the fast ion source is assumed. The results are applicable to multi-ion-species plasma. Since analytica…
▽ More
This paper extends the semianalytical treatment of fast ion current density to take into account time dependence and velocity diffusion using solutions of Boltzmann equation with a complete Coulomb collision term (Goncharov et al. 2010 Phys. Plasmas 17 112313). An arbitrary angle distribution of the fast ion source is assumed. The results are applicable to multi-ion-species plasma. Since analytical results provide an extra physical insight and constitute a reliable basis for verification of numerical codes, it is desirable to obtain exact solutions where possible. New results clarify the discrepancies between analytical formulae in earlier bibliography and improve the physical basis of neutral beam injection current drive.
△ Less
Submitted 5 April, 2011; v1 submitted 28 April, 2010;
originally announced April 2010.
-
Efficient implementation of the nonequilibrium Green function method for electronic transport calculations
Authors:
Taisuke Ozaki,
Kengo Nishio,
Hiori Kino
Abstract:
An efficient implementation of the nonequilibrium Green function (NEGF) method combined with the density functional theory (DFT) using localized pseudo-atomic orbitals (PAOs) is presented for electronic transport calculations of a system connected with two leads under a finite bias voltage. In the implementation, accurate and efficient methods are developed especially for evaluation of the densi…
▽ More
An efficient implementation of the nonequilibrium Green function (NEGF) method combined with the density functional theory (DFT) using localized pseudo-atomic orbitals (PAOs) is presented for electronic transport calculations of a system connected with two leads under a finite bias voltage. In the implementation, accurate and efficient methods are developed especially for evaluation of the density matrix and treatment of boundaries between the scattering region and the leads. Equilibrium and nonequilibrium contributions in the density matrix are evaluated with very high precision by a contour integration with a continued fraction representation of the Fermi-Dirac function and by a simple quadratureon the real axis with a small imaginary part, respectively. The Hartree potential is computed efficiently by a combination of the two dimensional fast Fourier transform (FFT) and a finite difference method, and the charge density near the boundaries is constructed with a careful treatment to avoid the spurious scattering at the boundaries. The efficiency of the implementation is demonstrated by rapid convergence properties of the density matrix. In addition, as an illustration, our method is applied for zigzag graphene nanoribbons, a Fe/MgO/Fe tunneling junction, and a LaMnO$_3/$SrMnO$_3$ superlattice, demonstrating its applicability to a wide variety of systems.
△ Less
Submitted 28 August, 2009;
originally announced August 2009.
-
Dual Spin Filter Effect in a Zigzag Graphene Nanoribbon
Authors:
Taisuke Ozaki,
Kengo Nishio,
Hongming Weng,
Hiori Kino
Abstract:
By first principle calculations, a dual spin filter effect under finite bias voltages is demonstrated in an antiferromagnetic junction of symmetric zigzag graphene nanoribbon (ZGNR). Unlike conventional spin filter devices using half metallic materials, the up- and down-spin electrons are unidirectionally filtered in the counter direction of the bias voltage, making the junction a dual spin filt…
▽ More
By first principle calculations, a dual spin filter effect under finite bias voltages is demonstrated in an antiferromagnetic junction of symmetric zigzag graphene nanoribbon (ZGNR). Unlike conventional spin filter devices using half metallic materials, the up- and down-spin electrons are unidirectionally filtered in the counter direction of the bias voltage, making the junction a dual spin filter. On the contrary, asymmetric ZGNRs do not exhibit such a spin filter effect. By analyzing Wannier functions and a tight-binding model, we clarify that an interplay between the spin polarized band structure of $π$ and $π^*$ states near the Fermi level and decoupling of the interband hop** of the two states, arising from the symmetry of the wave functions, plays a crucial role in the effect.
△ Less
Submitted 15 May, 2009;
originally announced May 2009.
-
Nonlinear ultrafast modulation of the optical absorption of few cycle terahertz pulses in n-doped semiconductors
Authors:
L Razzari,
F H Su,
G Sharma,
F Blanchard,
A Ayesheshim,
H-C Bandulet,
R Morandotti,
J-C Kieffer,
T Ozaki,
M Reid,
F A Hegmann
Abstract:
We use an open-aperture Z-scan technique to show how intense few-cycle terahertz pulses can experience a nonlinear bleaching of absorption in an n-doped semiconductor due to terahertz-electric-field-driven intervalley scattering of electrons in the conduction band. Coherent detection of the transmitted terahertz pulse waveform also allows the nonlinear conductivity dynamics to be followed with s…
▽ More
We use an open-aperture Z-scan technique to show how intense few-cycle terahertz pulses can experience a nonlinear bleaching of absorption in an n-doped semiconductor due to terahertz-electric-field-driven intervalley scattering of electrons in the conduction band. Coherent detection of the transmitted terahertz pulse waveform also allows the nonlinear conductivity dynamics to be followed with sub-picosecond time resolution. Both the Z-scan and time-domain results are found to be in agreement with our theoretical analysis.
△ Less
Submitted 3 May, 2009;
originally announced May 2009.
-
Maximally localized Wannier function within linear combination of pseudo-atomic orbital method: Implementation and applications to transition-metal-benzene complex
Authors:
Hongming Weng,
Taisuke Ozaki,
Kiyoyuki Terakura
Abstract:
Construction of maximally localized Wannier functions (MLWFs) has been implemented within the linear combination of pseudo-atomic orbital (LCPAO) method. Detailed analysis using MLWFs is applied to three closely related materials, single benzene (Bz) molecule, organometallic Vanadium-Bz infinite chain, and V$_2$Bz$_{3}$ sandwich cluster. Two important results come out from the present analysis:…
▽ More
Construction of maximally localized Wannier functions (MLWFs) has been implemented within the linear combination of pseudo-atomic orbital (LCPAO) method. Detailed analysis using MLWFs is applied to three closely related materials, single benzene (Bz) molecule, organometallic Vanadium-Bz infinite chain, and V$_2$Bz$_{3}$ sandwich cluster. Two important results come out from the present analysis: 1) for the infinite chain, the validity of the basic assumption in the mechanism of Kanamori and Terakura for the ferromagnetic (FM) state stability is confirmed; 2) for V$_2$Bz$_3$, an important role played by the difference in the orbital energy between the edge Bzs and the middle Bz is newly revealed: the on-site energy of p$δ$ states of edge Bzs is higher than that of middle Bz, which further reduces the FM stability of V$_2$Bz$_3$.
△ Less
Submitted 10 February, 2009;
originally announced February 2009.
-
Spin-Orbit Integrated Ground State and Magnetic Anisotropy in Sr$_2$IrO$_4$
Authors:
Hosub **,
Hogyun Jeong,
Taisuke Ozaki,
Jaejun Yu
Abstract:
We present a microscopic model for the anisotropic exchange interactions in Sr$_{2}$IrO$_{4}$. A direct construction of Wannier functions from first-principles calculations proves the $j_{\mathrm{eff}}$=1/2 character of the spin-orbit integrated states at the Fermi level. An effective $j_{\mathrm{eff}}$-spin Hamiltonian explains the observed weak ferromagnetism and anisotropy of antiferromagneti…
▽ More
We present a microscopic model for the anisotropic exchange interactions in Sr$_{2}$IrO$_{4}$. A direct construction of Wannier functions from first-principles calculations proves the $j_{\mathrm{eff}}$=1/2 character of the spin-orbit integrated states at the Fermi level. An effective $j_{\mathrm{eff}}$-spin Hamiltonian explains the observed weak ferromagnetism and anisotropy of antiferromagnetically ordered magnetic state, which arise naturally from the $j_{\mathrm{eff}}$=1/2 state with a rotation of IrO$_{6}$ octahedra. It is suggested that Sr$_{2}$IrO$_{4}$ is a unique class of materials with effective exchange interactions in the spin-orbital Hilbert space.
△ Less
Submitted 24 July, 2009; v1 submitted 26 August, 2008;
originally announced August 2008.
-
Theoretical analysis of magnetic coupling in sandwich clusters V_n(C_6H_6)_{n+1}
Authors:
Hongming Weng,
Taisuke Ozaki,
Kiyoyuki Terakura
Abstract:
The mechanism of ferromagnetism stability in sandwich clusters V$_n$(C$_6$H$_6$)$_{n+1}$ has been studied by first-principles calculation and model analysis. It is found that each of the three types of bonds between V and benzene (Bz) plays different roles. V 3d$_{z^2}$ orbital, extending along the molecular axis, is weakly hybridized with Bz's HOMO-1 orbital to form the $σ$-bond. It is quite lo…
▽ More
The mechanism of ferromagnetism stability in sandwich clusters V$_n$(C$_6$H$_6$)$_{n+1}$ has been studied by first-principles calculation and model analysis. It is found that each of the three types of bonds between V and benzene (Bz) plays different roles. V 3d$_{z^2}$ orbital, extending along the molecular axis, is weakly hybridized with Bz's HOMO-1 orbital to form the $σ$-bond. It is quite localized and singly occupied, which contributes 1$μ_B$ to the magnetic moment but little to the magnetic coupling of neighboring V magnetic moments. The in-plane d$_{x^2-y^2}$, d$_{xy}$ orbitals are hybridized with the LUMO of Bz and constitute the $δ$-bond. This hybridization is medium and crucial to the magnetic coupling though the $δ$ states have no net contribution to the total magnetic moment. d$_{xz}$, d$_{yz}$ and HOMO of Bz form a quite strong $π$-bond to hold the molecular structure but they are inactive in magnetism because their energy levels are far away from the Fermi level. Based on the results of first-principles calculation, we point out that the ferromagnetism stability is closely related with the mechanism proposed by Kanamori and Terakura [J. Kanamori and K. Terakura, J. Phys. Soc. Jpn. 70, 1433 (2001)]. However, the presence of edge Bz's in the cluster introduces an important modification. A simple model is constructed to explain the essence of the physical picture.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
-
Microscopic surface structure of C/SiC composite mirrors for space cryogenic telescopes
Authors:
Keigo Enya,
Takao Nakagawa,
Hidehiro Kaneda,
Takashi Onaka,
Tuyoshi Ozaki,
Masami Kume
Abstract:
We report on the microscopic surface structure of carbon-fiber-reinforced silicon carbide (C/SiC) composite mirrors that have been improved for the Space Infrared Telescope for Cosmology and Astrophysics (SPICA) and other cooled telescopes. The C/SiC composite consists of carbon fiber, silicon carbide, and residual silicon. Specific microscopic structures are found on the surface of the bare C/S…
▽ More
We report on the microscopic surface structure of carbon-fiber-reinforced silicon carbide (C/SiC) composite mirrors that have been improved for the Space Infrared Telescope for Cosmology and Astrophysics (SPICA) and other cooled telescopes. The C/SiC composite consists of carbon fiber, silicon carbide, and residual silicon. Specific microscopic structures are found on the surface of the bare C/SiC mirrors after polishing. These structures are considered to be caused by the different hardness of those materials. The roughness obtained for the bare mirrors is 20 nm rms for flat surfaces and 100 nm rms for curved surfaces. It was confirmed that a SiSiC slurry coating is effective in reducing the roughness to 2 nm rms. The scattering properties of the mirrors were measured at room temperature and also at 95 K. No significant change was found in the scattering properties through cooling, which suggests that the microscopic surface structure is stable with changes in temperature down to cryogenic values. The C/SiC mirror with the SiSiC slurry coating is a promising candidate for the SPICA telescope.
△ Less
Submitted 9 July, 2007;
originally announced July 2007.
-
Compensation of the Crossing Angle with Crab Cavities at KEKB
Authors:
T. Abe,
K. Akai,
M. Akemoto,
A. Akiyama,
M. Arinaga,
K. Ebihara,
K. Egawa,
A. Enomoto,
J. Flanagan,
S. Fukuda,
H. Fukuma,
Y. Funakoshi,
K. Furukawa,
T. Furuya,
K. Hara,
T. Higo,
S. Hiramatsu,
H. Hisamatsu,
H. Honma,
T. Honma,
K. Hosoyama,
T. Ieiri,
N. Iida,
H. Ikeda,
M. Ikeda
, et al. (90 additional authors not shown)
Abstract:
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than…
▽ More
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
Linear scaling Krylov subspace method for large scale {\it ab initio} electronic structure calculations of metals
Authors:
Taisuke Ozaki
Abstract:
An efficient and robust linear scaling method is presented for large scale {\it ab initio} electronic structure calculations of a wide variety of materials including metals. The detailed short range and the effective long range contributions to the electronic structure are taken into account by solving an embedded cluster defined in a Krylov subspace, which provides rapid convergence for not onl…
▽ More
An efficient and robust linear scaling method is presented for large scale {\it ab initio} electronic structure calculations of a wide variety of materials including metals. The detailed short range and the effective long range contributions to the electronic structure are taken into account by solving an embedded cluster defined in a Krylov subspace, which provides rapid convergence for not only insulators but also metals.
As an illustration of the method, we present a large scale calculation based on density functional theory for a palladium cluster with a single iron impurity.
△ Less
Submitted 12 September, 2005;
originally announced September 2005.
-
Efficient Recursion Method for Inverting Overlap Matrix
Authors:
T. Ozaki
Abstract:
A new O(N) algorithm based on a recursion method, in which the computational effort is proportional to the number of atoms N, is presented for calculating the inverse of an overlap matrix which is needed in electronic structure calculations with the the non-orthogonal localized basis set. This efficient inverting method can be incorporated in several O(N) methods for diagonalization of a general…
▽ More
A new O(N) algorithm based on a recursion method, in which the computational effort is proportional to the number of atoms N, is presented for calculating the inverse of an overlap matrix which is needed in electronic structure calculations with the the non-orthogonal localized basis set. This efficient inverting method can be incorporated in several O(N) methods for diagonalization of a generalized secular equation. By studying convergence properties of the 1-norm of an error matrix for diamond and fcc Al, this method is compared to three other O(N) methods (the divide method, Taylor expansion method, and Hotelling's method) with regard to computational accuracy and efficiency within the density functional theory. The test calculations show that the new method is about one-hundred times faster than the divide method in computational time to achieve the same convergence for both diamond and fcc Al, while the Taylor expansion method and Hotelling's method suffer from numerical instabilities in most cases.
△ Less
Submitted 4 June, 2001;
originally announced June 2001.
-
Convergent recursive O(N) calculations for ab initio tight-binding
Authors:
T. Ozaki,
K. Terakura
Abstract:
A theory is presented for a novel recursion method for O(N) ab initio tight-binding calculations. A long-standing problem of generalizing the recursion method to a non-orthogonal basis, which is a crucial step to make the recursion method applicable to ab initio calculations, is solved by the introduction of the hybrid representation and the two-sided block Lanczos algorithm. As a test of effici…
▽ More
A theory is presented for a novel recursion method for O(N) ab initio tight-binding calculations. A long-standing problem of generalizing the recursion method to a non-orthogonal basis, which is a crucial step to make the recursion method applicable to ab initio calculations, is solved by the introduction of the hybrid representation and the two-sided block Lanczos algorithm. As a test of efficiency of the new method, convergence properties in energy and force of insulators, semiconductors, metals, and molecules are studied for not only simple model systems but also some real materials within the density functional theory. The present O(N) method possesses good convergence properties for metals as well as insulators.
△ Less
Submitted 4 June, 2001;
originally announced June 2001.
-
Fractal features of dark, maintained, and driven neural discharges in the cat visual system
Authors:
Steven B. Lowen,
Tsuyoshi Ozaki,
Ehud Kaplan,
Bahaa E. A. Saleh,
Malvin C. Teich
Abstract:
We employ a number of statistical measures to characterize neural discharge activity in cat retinal ganglion cells (RGCs) and in their target lateral geniculate nucleus (LGN) neurons under various stimulus conditions, and we develop a new measure to examine correlations in fractal activity between spike-train pairs. In the absence of stimulation (i.e., in the dark), RGC and LGN discharges exhibi…
▽ More
We employ a number of statistical measures to characterize neural discharge activity in cat retinal ganglion cells (RGCs) and in their target lateral geniculate nucleus (LGN) neurons under various stimulus conditions, and we develop a new measure to examine correlations in fractal activity between spike-train pairs. In the absence of stimulation (i.e., in the dark), RGC and LGN discharges exhibit similar properties. The presentation of a constant, uniform luminance to the eye reduces the fractal fluctuations in the RGC maintained discharge but enhances them in the target LGN discharge, so that neural activity in the pair no longer mirror each other. A drifting-grating stimulus yields RGC and LGN driven spike trains similar in character to those observed in the maintained discharge, with two notable distinctions: action potentials are reorganized along the time axis so that they occur only during certain phases of the stimulus waveform, and fractal activity is suppressed. Under both uniform-luminance and drifting-grating stimulus conditions (but not in the dark), the discharges of pairs of LGN cells are highly correlated over long time scales; in contrast discharges of RGCs are nearly uncorrelated with each other. This indicates that action-potential activity at the LGN is subject to a common fractal modulation to which the RGCs are not subjected.
△ Less
Submitted 18 October, 1999;
originally announced October 1999.
-
Block bond-order potential as a convergent moments-based method
Authors:
T. Ozaki,
M. Aoki,
D. G. Pettifor
Abstract:
The theory of a novel bond-order potential, which is based on the block Lanczos algorithm, is presented within an orthogonal tight-binding representation. The block scheme handles automatically the very different character of sigma and pi bonds by introducing block elements, which produces rapid convergence of the energies and forces within insulators, semiconductors, metals, and molecules. The…
▽ More
The theory of a novel bond-order potential, which is based on the block Lanczos algorithm, is presented within an orthogonal tight-binding representation. The block scheme handles automatically the very different character of sigma and pi bonds by introducing block elements, which produces rapid convergence of the energies and forces within insulators, semiconductors, metals, and molecules. The method gives the first convergent results for vacancies in semiconductors using a moments-based method with a low number of moments. Our use of the Lanczos basis simplifies the calculations of the band energy and forces, which allows the application of the method to the molecular dynamics simulations of large systems. As an illustration of this convergent O(N) method we apply the block bond-order potential to the large scale simulation of the deformation of a carbon nanotube.
△ Less
Submitted 8 September, 1999;
originally announced September 1999.
