Showing 1–9 of 9 results for author: Orth, A

Fast single pixel modal wavefront sensing using neural networks

Authors: Antony Orth, Oliver Pitts, Costel Flueraru, Terrence Stewart, Hamed Akhlaghi, Mohamadreza Pashazanoosi, Michael Taylor, Steve Hranilovic

Abstract: Dynamic wavefront aberrations negatively impact a wide range of optical applications including astronomy, optical free-space telecommunications and bio-imaging. Wavefront errors can be compensated by an adaptive optics system comprised of a deformable mirror and wavefront sensor connected by a control loop. For satellite optical communications (SatCom), wavefront sensing is particularly challengin… ▽ More Dynamic wavefront aberrations negatively impact a wide range of optical applications including astronomy, optical free-space telecommunications and bio-imaging. Wavefront errors can be compensated by an adaptive optics system comprised of a deformable mirror and wavefront sensor connected by a control loop. For satellite optical communications (SatCom), wavefront sensing is particularly challenging due to the rapid wavefront fluctuations induced by strong turbulence and movement of the transmitting satellite across the sky. Existing wavefront sensing techniques require fast cameras (>kHz) that are not widely available at wavelengths suitable for SatCom (e.g., 1550nm and mid-to-long wave infrared). Here, we propose a new wavefront sensing technique that uses a single photodiode and a fast mirror to make phase-diverse intensity measurements of the incoming wavefront. We train neural networks to accurately estimate the input phase given this phase-diverse sub-millisecond intensity trace. Our simulations show that our technique is robust in cases of strong turbulence where previous modal wavefront sensors fail due to modal crosstalk, achieving 99% of the optimal Strehl ratio from a 50-mode correction at a sensing rate of 2kHz. We explore typical cases of turbulence magnitude, sensing speed and noise that might be encountered by such a system. △ Less

Submitted 21 March, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: We discovered issues with the training data that biased the results in this manuscript. This work is being updated and a revised manuscript will be posted at a later date

Micro-optics fabrication using blurred tomography

Authors: Daniel Webber, Yujie Zhang, Kathleen L. Sampson, Thomas Lacelle, Chantal Paquet, Jonathan Boisvert, Antony Orth

Abstract: We demonstrate the fabrication of millimeter-sized optical components using tomographic volumetric additive manufacturing (VAM). By purposely blurring the writing beams through the use of a large etendue source, the layer-like artifacts called striations are eliminated enabling the rapid and direct fabrication of smooth surfaces. We call this method blurred tomography, and demonstrate its capabili… ▽ More We demonstrate the fabrication of millimeter-sized optical components using tomographic volumetric additive manufacturing (VAM). By purposely blurring the writing beams through the use of a large etendue source, the layer-like artifacts called striations are eliminated enabling the rapid and direct fabrication of smooth surfaces. We call this method blurred tomography, and demonstrate its capability by printing a plano-convex optical lens with comparable imaging performance to that of a commercially-available glass lens. Furthermore, due to the intrinsic freeform design nature of VAM, we demonstrate the double-sided fabrication of a biconvex microlens array, and for the first time demonstrate overprinting of a lens onto an optical fiber using this printing modality. This approach to VAM will pave the way for low-cost, rapid-prototy** of freeform optical components. △ Less

Submitted 16 January, 2024; originally announced January 2024.

Comments: 8 pages, 5 figures

Quantum correlation light-field microscope with extreme depth of field

Authors: Yingwen Zhang, Duncan England, Antony Orth, Ebrahim Karimi, Benjamin Sussman

Abstract: Light-field microscopy (LFM) is a 3D microscopy technique whereby volumetric information of a sample is gained by simultaneously capturing both the position and momentum (angular) information of light illuminating a scene. Conventional LFM designs generally require a trade-off between position and momentum resolution, requiring one to sacrifice resolving power for increased depth of field (DOF) or… ▽ More Light-field microscopy (LFM) is a 3D microscopy technique whereby volumetric information of a sample is gained by simultaneously capturing both the position and momentum (angular) information of light illuminating a scene. Conventional LFM designs generally require a trade-off between position and momentum resolution, requiring one to sacrifice resolving power for increased depth of field (DOF) or vice versa. In this work, we demonstrate a LFM design that does not require this trade-off by utilizing the inherent correlations between spatial-temporal entangled photon pairs. Here, one photon from the pair is used to illuminate a sample from which the position information of the photon is captured directly by a camera. By virtue of the strong momentum anti-correlation between the two photons, the momentum information of the illumination photon can then be inferred by measuring the angle of its entangled partner on a different camera. By using a combination of ray-tracing and a Gerchberg-Saxton type algorithm for the light field reconstruction, we demonstrate that a resolving power of 5 $μ$m can be maintained with a DOF of $\sim500$ $μ$m, approximately 3 times of the latest LFM designs or $>100$ time that of a conventional microscope. In the extreme, at a resolving power of 100 $μ$m, it is possible to achieve near infinite DOF. △ Less

Submitted 13 March, 2023; v1 submitted 23 December, 2022; originally announced December 2022.

Comments: 16 pages, 9 figures

Versatile volumetric additive manufacturing with 3D ray tracing

Authors: Daniel Webber, Yujie Zhang, Michel Picard, Jonathan Boisvert, Chantal Paquet, Antony Orth

Abstract: Tomographic volumetric additive manufacturing (VAM) is an optical 3D printing technique where an object is formed by photopolymerizing resin via tomographic projections. Currently, these projections are calculated using the Radon transform from computed tomography but it ignores two fundamental properties of real optical projection systems: finite etendue and non-telecentricity. In this work, we i… ▽ More Tomographic volumetric additive manufacturing (VAM) is an optical 3D printing technique where an object is formed by photopolymerizing resin via tomographic projections. Currently, these projections are calculated using the Radon transform from computed tomography but it ignores two fundamental properties of real optical projection systems: finite etendue and non-telecentricity. In this work, we introduce 3D ray tracing as a new method of computing projections in tomographic VAM and demonstrate high fidelity printing in non-telecentric and higher etendue systems, leading to a 3X increase in vertical build volume than the standard Radon method. The method introduced here expands the possible tomographic VAM printing configurations, enabling faster, cheaper, and higher fidelity printing. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Comments: 16 pages, 8 figures

On-the-fly 3D metrology of volumetric additive manufacturing

Authors: Antony Orth, Kathleen L. Sampson, Yujie Zhang, Kayley Ting, Derek Aranguren van Egmond, Kurtis Laqua, Thomas Lacelle, Daniel Webber, Dorothy Fathi, Jonathan Boisvert, Chantal Paquet

Abstract: Additive manufacturing techniques are revolutionizing product development by enabling fast turnaround from design to fabrication. However, the throughput of the rapid prototy** pipeline remains constrained by print optimization, requiring multiple iterations of fabrication and ex-situ metrology. Despite the need for a suitable technology, robust in-situ shape measurement of an entire print is no… ▽ More Additive manufacturing techniques are revolutionizing product development by enabling fast turnaround from design to fabrication. However, the throughput of the rapid prototy** pipeline remains constrained by print optimization, requiring multiple iterations of fabrication and ex-situ metrology. Despite the need for a suitable technology, robust in-situ shape measurement of an entire print is not currently available with any additive manufacturing modality. Here, we address this shortcoming by demonstrating fully simultaneous 3D metrology and printing. We exploit the dramatic increase in light scattering by a photoresin during gelation for real-time 3D imaging of prints during tomographic volumetric additive manufacturing. Tomographic imaging of the light scattering density in the build volume yields quantitative, artifact-free 3D + time models of cured objects that are accurate to below 1% of the size of the print. By integrating shape measurement into the printing process, our work paves the way for next-generation rapid prototy** with real-time defect detection and correction. △ Less

Submitted 6 February, 2022; originally announced February 2022.

Ray-tracing with quantum correlated photons to image a 3D scene

Authors: Yingwen Zhang, Antony Orth, Duncan England, Benjamin Sussman

Abstract: To capture the 3D information of a scene, conventional techniques often require multiple 2D images of the scene to be captured from different perspectives. In this work we demonstrate the reconstruction of a scene's 3D information through ray-tracing using quantum correlated photon pairs. By capturing the two photons in different image planes using time-tagging cameras and taking advantage of the… ▽ More To capture the 3D information of a scene, conventional techniques often require multiple 2D images of the scene to be captured from different perspectives. In this work we demonstrate the reconstruction of a scene's 3D information through ray-tracing using quantum correlated photon pairs. By capturing the two photons in different image planes using time-tagging cameras and taking advantage of the position, momentum and time correlation of the photons, the photons' propagation trajectory can be reconstructed. With this information on every photon pair, we were able to demonstrate refocusing, depth of field adjustment and parallax visualization of a 3D scene. With future camera advancements, this technique could achieve a much higher momentum resolution than conventional techniques thus giving larger depth of field and more viewing angles. The high photon correlation and low photon flux from a quantum source also makes the technique well suited for 3D imaging of light sensitive samples. △ Less

Submitted 19 August, 2021; v1 submitted 27 July, 2021; originally announced July 2021.

Correcting ray distortion in tomographic additive manufacturing

Authors: Antony Orth, Kathleen L. Sampson, Kayley Ting, Jonathan Boisvert, Chantal Paquet

Abstract: Light-based additive manufacturing techniques enable a rapid transition from object design to production. In these approaches, a 3D object is typically built by successive polymerization of 2D layers in a photocurable resin. A recently demonstrated technique, however, uses tomographic dose patterning to establish a 3D light dose distribution within a cylindrical glass vial of photoresin. Lensing d… ▽ More Light-based additive manufacturing techniques enable a rapid transition from object design to production. In these approaches, a 3D object is typically built by successive polymerization of 2D layers in a photocurable resin. A recently demonstrated technique, however, uses tomographic dose patterning to establish a 3D light dose distribution within a cylindrical glass vial of photoresin. Lensing distortion from the cylindrical vial is currently mitigated by either an index matching bath around the print volume or a cylindrical lens. In this work, we show that these hardware approaches to distortion correction are unnecessary. Instead, we demonstrate how the lensing effect can be computationally corrected by resampling the parallel-beam radon transform into an aberrated geometry. We also demonstrate a more general application of our computational approach by correcting for non-telecentricity inherent in most optical projection systems. We expect that our results will underpin a more simple and flexible class of tomographic 3D printers where deviations from the assumed parallel-beam projection geometry are rectified computationally. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Sculpting light with paper for computational mobile phone microscopy

Authors: Antony Orth

Abstract: Many optical microscopy techniques rely on structured illumination by way of a projected image (eg. structured illumination microscopy) or a tailored angular distribution of light (eg. ptychography). Electro-optical equipment such as spatial light modulators and light emitting diode (LED) arrays are commonly used to sculpt light for these imaging schemes. However, these high-tech devices are not a… ▽ More Many optical microscopy techniques rely on structured illumination by way of a projected image (eg. structured illumination microscopy) or a tailored angular distribution of light (eg. ptychography). Electro-optical equipment such as spatial light modulators and light emitting diode (LED) arrays are commonly used to sculpt light for these imaging schemes. However, these high-tech devices are not a requirement for light crafting. Patterned diffusely reflecting surfaces also imprint a spatio-angular structure onto reflected light. We demonstrate that paper patterned with a standard commercial printer can serve to structure the illumination light field for refocusing and stereo microscopy on a mobile phone microscope. Our results illustrate the utility of paper as a light sculpting element for low-tech computational imaging. △ Less

Submitted 20 September, 2020; originally announced September 2020.

Magnetic field-induced enhancement of the nitrogen-vacancy fluorescence quantum yield

Authors: M. Capelli, P. Reineck, D. W. M. Lau, A. Orth, J. Jeske, M. W. Doherty, T. Ohshima, A. D. Greentree, B. C. Gibson

Abstract: The nitrogen-vacancy (NV) centre in diamond is a unique optical defect that is used in many applications today and methods to enhance its fluorescence brightness are highly sought after. We observed experimentally an enhancement of the NV quantum yield by up to 7% in bulk diamond caused by an external magnetic field relative to the field-free case. This observation is rationalised phenomenological… ▽ More The nitrogen-vacancy (NV) centre in diamond is a unique optical defect that is used in many applications today and methods to enhance its fluorescence brightness are highly sought after. We observed experimentally an enhancement of the NV quantum yield by up to 7% in bulk diamond caused by an external magnetic field relative to the field-free case. This observation is rationalised phenomenologically in terms of a magnetic field dependence of the NV excited state triplet-to-singlet transition rate. The theoretical model is in good qualitative agreement with the experimental results at low excitation intensities. Our results significantly contribute to our fundamental understanding of the photophysical properties of the NV defect in diamond and may enable novel NV centre-based magnetometry techniques. △ Less

Submitted 22 May, 2017; originally announced May 2017.

Comments: 10 pages, 9 figures