-
Exploring the impact of automated vehicles lane-changing behavior on urban network efficiency
Authors:
Alberto Pelizza,
Federico Orsini,
Sefa Yilmaz-Niewerth,
Riccardo Rossi,
Bernhard Friedrich
Abstract:
While automated vehicle (AV) research has grown steadily in recent years, the impact of automated lane changing behavior on transportation systems remains a largely understudied topic. The present work aims to explore the effects of automated lane changing behavior on urban network efficiency as the penetration rate of AVs increases. To the best of the authors knowledge, this represents the first…
▽ More
While automated vehicle (AV) research has grown steadily in recent years, the impact of automated lane changing behavior on transportation systems remains a largely understudied topic. The present work aims to explore the effects of automated lane changing behavior on urban network efficiency as the penetration rate of AVs increases. To the best of the authors knowledge, this represents the first attempt to do so by isolating the effects of the lane changing behavior; this was obtained by considering AVs with automated lateral control, yet retaining the same longitudinal control characteristics of conventional vehicles (CV). An urban road network located in Hannover, Germany, was modeled with the microsimulation software SUMO, and several scenarios were analyzed, starting from a baseline with only CVs and then progressively increasing the AV penetration rate with 10% increments. Results highlight a modest, but statistically significant, decrease in system performance, with travel times increasing, and average speed and network capacity decreasing, as penetration rates increase. This was likely caused by a more prudent behavior of AVs, which accepted larger gaps than CVs when performing lane changing maneuvers.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Before-after safety analysis of a shared space implementation
Authors:
Federico Orsini,
Mariana Batista,
Bernhard Friedrich,
Massimiliano Gastaldi,
Riccardo Rossi
Abstract:
Shared spaces aim to reduce the dominance of motor vehicles by promoting pedestrian and cyclist activity and minimizing segregation between road users. Despite the intended scope to improve the safety of vulnerable road users, only few works in the literature focused on before after safety evaluations, mainly analyzing changes in users trajectories and speeds, traffic volumes, and conflict counts,…
▽ More
Shared spaces aim to reduce the dominance of motor vehicles by promoting pedestrian and cyclist activity and minimizing segregation between road users. Despite the intended scope to improve the safety of vulnerable road users, only few works in the literature focused on before after safety evaluations, mainly analyzing changes in users trajectories and speeds, traffic volumes, and conflict counts, which, while useful, cannot univocally quantify road safety. Here, we propose a more advanced methodology, based on surrogate measures of safety and Extreme Value Theory, to assess road safety before and after the implementation of a shared space. The aim is to produce a crash risk estimation in different scenarios, obtaining a quantitative and comprehensive indicator, useful to practitioners for evaluating the safety of urban design solutions. A real world case study illustrates the proposed procedure. Video data were collected on two separate days, before and after a shared space implementation, and were semiautomatically processed to extract road users trajectories. Analysis of traffic volumes, trajectories, speeds and yield ratios allowed to understand the spatial behavior of road users in the two scenarios. Traffic conflicts, identified with an innovative surrogate measure of safety called time to avoided collision point, TTAC, were then used to estimate a Lomax distribution, and therefore to model the probabilistic relationship between conflicts and crashes, eventually retrieving a crash risk estimate. Results show that the analyzed shared space was able to significantly reduce the risk of crashes, and these findings are consistent with the observed changes in users speed and spatial behavior. The analyzed case study and its limitations were useful in highlighting the methodology main features and suggesting practical prescriptions for practitioners.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
DANTE Digital Pulse Processor for XRF and XAS experiments
Authors:
F. J. Iguaz,
L. Bombelli,
S. Meo,
F. Orsini,
S. Schöeder,
A. Tocchio,
N. Trcera,
D. Vantelon
Abstract:
DANTE is a new Digital Pulse Processor (DPP) developed for fluorescence detectors, like silicon drift detectors (SDDs) or High Purity Germanium detectors (HPGe), used in X-ray Fluorescence (XRF) and X-ray Absorption Spectroscopy (XAS) experiments at synchrotron facilities. Its main features are its optimal energy resolution and peak stability for detector count rate values up to 1-2 Mcps, and its…
▽ More
DANTE is a new Digital Pulse Processor (DPP) developed for fluorescence detectors, like silicon drift detectors (SDDs) or High Purity Germanium detectors (HPGe), used in X-ray Fluorescence (XRF) and X-ray Absorption Spectroscopy (XAS) experiments at synchrotron facilities. Its main features are its optimal energy resolution and peak stability for detector count rate values up to 1-2 Mcps, and its enhanced rejection of pile-up events. In this paper, we present the first complete evaluation of DANTE performance in SOLEIL synchrotron facility. DANTE has been tested in laboratory with an X-ray generator source and in different experiments at LUCIA and PUMA beamlines at SOLEIL.
△ Less
Submitted 17 May, 2023; v1 submitted 16 March, 2023;
originally announced March 2023.
-
Detection limit of next-generation of multi-element germanium detectors in the context of Environmental science
Authors:
F. J. Iguaz,
T. Saleem,
E. Fonda,
G. Landrot,
L. Manzanillas,
F. Orsini
Abstract:
One of the main challenges in Environmental sciences is the identification and chemical evolution of polluting traces (e.g, cadmium or antimony) in soil, which requires long acquistion times for accurate measurements at synchrotron facilities. In this context, the potential of a new generation multi-element germanium detectors to identify traces at 0.1-1~ppm in a reasonable time has been studied u…
▽ More
One of the main challenges in Environmental sciences is the identification and chemical evolution of polluting traces (e.g, cadmium or antimony) in soil, which requires long acquistion times for accurate measurements at synchrotron facilities. In this context, the potential of a new generation multi-element germanium detectors to identify traces at 0.1-1~ppm in a reasonable time has been studied using Allpix Squared framework. This code has been customized to include the three dimensional electric and weighting field maps generated by COMSOL Multiphysics software, and several features to model the sample environment at SOLEIL synchrotron and the signal response of a germanium detector equipped with a Digital Pulse Processor (DPP). The full simulation chain has been validated by experimental data from SAMBA beamline of SOLEIL synchrotron. This work presents a first estimation of the detection limit to cadmium traces in a soil sample for a future multi-element germanium detector, using this simulation chain.
△ Less
Submitted 15 April, 2022;
originally announced April 2022.
-
The accomplishment of the Engineering Design Activities of IFMIF/EVEDA: The European Japanese project towards a Li(d,xn) fusion relevant neutron source
Authors:
J. Knaster,
A. Ibarra,
J. Abal,
A. Abou Sena,
F. Arbeiter,
F. Arranz,
J. M. Arroyo,
E. Bargallo,
P. Y. Beauvais,
D. Bernardi,
N. Casal,
J. M. Carmona,
N. Chauvin,
M. Comunian,
O. Delferriere,
A. Delgado,
P. Diaz Arocas,
U. Fischer,
M. Frisoni,
A. Garcia,
P. Garin,
R. Gobin,
P. Gouat,
F. Groesche,
R. Heidinger
, et al. (42 additional authors not shown)
Abstract:
The International Fusion Materials Irradiation Facility (IFMIF), presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the frame of the Broader Approach Agreement between Europe and Japan, accomplished in summer 2013, on schedule, its EDA phase with the release of the engineering design report of the IFMIF plant, which is here described. Many improvements of…
▽ More
The International Fusion Materials Irradiation Facility (IFMIF), presently in its Engineering Validation and Engineering Design Activities (EVEDA) phase under the frame of the Broader Approach Agreement between Europe and Japan, accomplished in summer 2013, on schedule, its EDA phase with the release of the engineering design report of the IFMIF plant, which is here described. Many improvements of the design from former phases are implemented, particularly a reduction of beam losses and operational costs thanks to the superconducting accelerator concept, the re-location of the quench tank outside the test cell (TC) with a reduction of tritium inventory and a simplification on its replacement in case of failure, the separation of the irradiation modules from the shielding block gaining irradiation flexibility and enhancement of the remote handling equipment reliability and cost reduction, and the water cooling of the liner and biological shielding of the TC, enhancing the efficiency and economy of the related sub-systems. In addition, the maintenance strategy has been modified to allow a shorter yearly stop of the irradiation operations and a more careful management of the irradiated samples. The design of the IFMIF plant is intimately linked with the EVA phase carried out since the entry into force of IFMIF/EVEDA in June 2007.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Allpix-Squared Simulations of Multi-element Germanium Detectors for Synchrotron Applications
Authors:
T. Saleem,
F. J. Iguaz,
F. Orsini
Abstract:
X-rays spectroscopy experiments at synchrotron facilities were limited for many years by the maximum input-count rate and the signal-to-background ratio of germanium fluorescence detectors. These limitations are related to the germanium semiconductor device, the sensor configuration and its response to the incident X-ray flux at different energies. In order to understand and quantify such limitati…
▽ More
X-rays spectroscopy experiments at synchrotron facilities were limited for many years by the maximum input-count rate and the signal-to-background ratio of germanium fluorescence detectors. These limitations are related to the germanium semiconductor device, the sensor configuration and its response to the incident X-ray flux at different energies. In order to understand and quantify such limitations, physics simulation of the detector response is a powerful tool to provide guidelines for designing, prototy** and improving detectors, as well as modelling experimental environments, which reduces time and cost of development. For this purpose, a first complete and operational simulation chain based on Allpix Squared framework is presented, customized to multi-element germanium detectors and combined with three-dimensional simulations of the electric field and the weighting potential, based on COMSOL Multiphysics. Based on this simulation chain, a quantification of charge sharing effect as well as signal-to-background ratio at different beam energies has been made for a germanium detector equipped with and without collimator. In addition, two experimental measurements have been performed on the SAMBA beamline at SOLEIL synchrotron. The experimental data were used to set up the full simulation chain and good agreements have been observed between data and simulation.
△ Less
Submitted 17 January, 2022; v1 submitted 22 June, 2021;
originally announced June 2021.
-
Conceptual Design of BabyIAXO, the intermediate stage towards the International Axion Observatory
Authors:
A. Abeln,
K. Altenmüller,
S. Arguedas Cuendis,
E. Armengaud,
D. Attié,
S. Aune,
S. Basso,
L. Bergé,
B. Biasuzzi,
P. T. C. Borges De Sousa,
P. Brun,
N. Bykovskiy,
D. Calvet,
J. M. Carmona,
J. F. Castel,
S. Cebrián,
V. Chernov,
F. E. Christensen,
M. M. Civitani,
C. Cogollos,
T. Dafní,
A. Derbin,
K. Desch,
D. Díez,
M. Dinter
, et al. (101 additional authors not shown)
Abstract:
This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for…
▽ More
This article describes BabyIAXO, an intermediate experimental stage of the International Axion Observatory (IAXO), proposed to be sited at DESY. IAXO is a large-scale axion helioscope that will look for axions and axion-like particles (ALPs), produced in the Sun, with unprecedented sensitivity. BabyIAXO is conceived to test all IAXO subsystems (magnet, optics and detectors) at a relevant scale for the final system and thus serve as prototype for IAXO, but at the same time as a fully-fledged helioscope with relevant physics reach itself, and with potential for discovery. The BabyIAXO magnet will feature two 10 m long, 70 cm diameter bores, and will host two detection lines (optics and detector) of dimensions similar to the final ones foreseen for IAXO. BabyIAXO will detect or reject solar axions or ALPs with axion-photon couplings down to $g_{aγ} \sim 1.5 \times 10^{-11}$ GeV$^{-1}$, and masses up to $m_a\sim 0.25$ eV. BabyIAXO will offer additional opportunities for axion research in view of IAXO, like the development of precision x-ray detectors to identify particular spectral features in the solar axion spectrum, and the implementation of radiofrequency-cavity-based axion dark matter setups.
△ Less
Submitted 4 March, 2021; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Neural networks trained with WiFi traces to predict airport passenger behavior
Authors:
Federico Orsini,
Massimiliano Gastaldi,
Luca Mantecchini,
Riccardo Rossi
Abstract:
The use of neural networks to predict airport passenger activity choices inside the terminal is presented in this paper. Three network architectures are proposed: Feedforward Neural Networks (FNN), Long Short-Term Memory (LSTM) networks, and a combination of the two. Inputs to these models are both static (passenger and trip characteristics) and dynamic (real-time passenger tracking). A real-world…
▽ More
The use of neural networks to predict airport passenger activity choices inside the terminal is presented in this paper. Three network architectures are proposed: Feedforward Neural Networks (FNN), Long Short-Term Memory (LSTM) networks, and a combination of the two. Inputs to these models are both static (passenger and trip characteristics) and dynamic (real-time passenger tracking). A real-world case study exemplifies the application of these models, using anonymous WiFi traces collected at Bologna Airport to train the networks. The performance of the models were evaluated according to the misclassification rate of passenger activity choices. In the LSTM approach, two different multi-step forecasting strategies are tested. According to our findings, the direct LSTM approach provides better results than the FNN, especially when the prediction horizon is relatively short (20 minutes or less).
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
On the Runtime-Efficacy Trade-off of Anomaly Detection Techniques for Real-Time Streaming Data
Authors:
Dhruv Choudhary,
Arun Kejariwal,
Francois Orsini
Abstract:
Ever growing volume and velocity of data coupled with decreasing attention span of end users underscore the critical need for real-time analytics. In this regard, anomaly detection plays a key role as an application as well as a means to verify data fidelity. Although the subject of anomaly detection has been researched for over 100 years in a multitude of disciplines such as, but not limited to,…
▽ More
Ever growing volume and velocity of data coupled with decreasing attention span of end users underscore the critical need for real-time analytics. In this regard, anomaly detection plays a key role as an application as well as a means to verify data fidelity. Although the subject of anomaly detection has been researched for over 100 years in a multitude of disciplines such as, but not limited to, astronomy, statistics, manufacturing, econometrics, marketing, most of the existing techniques cannot be used as is on real-time data streams. Further, the lack of characterization of performance -- both with respect to real-timeliness and accuracy -- on production data sets makes model selection very challenging. To this end, we present an in-depth analysis, geared towards real-time streaming data, of anomaly detection techniques. Given the requirements with respect to real-timeliness and accuracy, the analysis presented in this paper should serve as a guide for selection of the "best" anomaly detection technique. To the best of our knowledge, this is the first characterization of anomaly detection techniques proposed in very diverse set of fields, using production data sets corresponding to a wide set of application domains.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Experimental determination of the frequency and field dependence of Specific Loss Power in Magnetic Fluid Hyperthermia
Authors:
M. Cobianchi,
A. Guerrini,
M. Avolio,
C. Innocenti,
M. Corti,
P. Arosio,
F. Orsini,
C. Sangregorio,
A. Lascialfari
Abstract:
Magnetic nanoparticles are promising systems for biomedical applications and in particular for Magnetic Fluid Hyperthermia, a promising therapy that utilizes the heat released by such systems to damage tumor cells. We present an experimental study of the physical properties that influences the capability of heat release, i.e. the Specific Loss Power, SLP, of three biocompatible ferrofluid samples…
▽ More
Magnetic nanoparticles are promising systems for biomedical applications and in particular for Magnetic Fluid Hyperthermia, a promising therapy that utilizes the heat released by such systems to damage tumor cells. We present an experimental study of the physical properties that influences the capability of heat release, i.e. the Specific Loss Power, SLP, of three biocompatible ferrofluid samples having a magnetic core of maghemite with different core diameter d= 10.2, 14.6 and 19.7 nm. The SLP was measured as a function of frequency f and intensity of the applied alternating magnetic field H, and it turned out to depend on the core diameter, as expected. The results allowed us to highlight experimentally that the physical mechanism responsible for the heating is size-dependent and to establish, at applied constant frequency, the phenomenological functional relationship SLP=cH^x, with 2<x<3 for all samples. The x-value depends on sample size and field frequency/ intensity, here chosen in the typical range of operating magnetic hyperthermia devices. For the smallest sample, the effective relaxation time Teff=19.5 ns obtained from SLP data is in agreement with the value estimated from magnetization data, thus confirming the validity of the Linear Response Theory model for this system at properly chosen field intensity and frequency.
△ Less
Submitted 10 April, 2017;
originally announced April 2017.
-
Shift Aggregate Extract Networks
Authors:
Francesco Orsini,
Daniele Baracchi,
Paolo Frasconi
Abstract:
We introduce an architecture based on deep hierarchical decompositions to learn effective representations of large graphs. Our framework extends classic R-decompositions used in kernel methods, enabling nested part-of-part relations. Unlike recursive neural networks, which unroll a template on input graphs directly, we unroll a neural network template over the decomposition hierarchy, allowing us…
▽ More
We introduce an architecture based on deep hierarchical decompositions to learn effective representations of large graphs. Our framework extends classic R-decompositions used in kernel methods, enabling nested part-of-part relations. Unlike recursive neural networks, which unroll a template on input graphs directly, we unroll a neural network template over the decomposition hierarchy, allowing us to deal with the high degree variability that typically characterize social network graphs. Deep hierarchical decompositions are also amenable to domain compression, a technique that reduces both space and time complexity by exploiting symmetries. We show empirically that our approach is able to outperform current state-of-the-art graph classification methods on large social network datasets, while at the same time being competitive on small chemobiological benchmark datasets.
△ Less
Submitted 18 March, 2024; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Development of a Depleted Monolithic CMOS Sensor in a 150 nm CMOS Technology for the ATLAS Inner Tracker Upgrade
Authors:
T. Wang,
P. Rymaszewski,
M. Barbero,
Y. Degerli,
S. Godiot,
F. Guilloux,
T. Hemperek,
T. Hirono,
H. Krüger,
J. Liu,
F. Orsini,
P. Pangaud,
A. Rozanov,
N. Wermes
Abstract:
The recent R&D focus on CMOS sensors with charge collection in a depleted zone has opened new perspectives for CMOS sensors as fast and radiation hard pixel devices. These sensors, labelled as depleted CMOS sensors (DMAPS), have already shown promising performance as feasible candidates for the ATLAS Inner Tracker (ITk) upgrade, possibly replacing the current passive sensors. A further step to exp…
▽ More
The recent R&D focus on CMOS sensors with charge collection in a depleted zone has opened new perspectives for CMOS sensors as fast and radiation hard pixel devices. These sensors, labelled as depleted CMOS sensors (DMAPS), have already shown promising performance as feasible candidates for the ATLAS Inner Tracker (ITk) upgrade, possibly replacing the current passive sensors. A further step to exploit the potential of DMAPS is to investigate the suitability of equip** the outer layers of the ATLAS ITk upgrade with fully monolithic CMOS sensors. This paper presents the development of a depleted monolithic CMOS pixel sensor designed in the LFoundry 150 nm CMOS technology, with the focus on design details and simulation results.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
Colloidal Assemblies of Oriented Maghemite Nanocrystals and their NMR Relaxometric Properties
Authors:
A. Kostopoulou,
S. K. P. Velu,
K. Thangavel,
F. Orsini,
K. Brintakis,
S. Psycharakis,
A. Ranella,
L. Bordonali,
A. Lappas,
A. Lascialfari
Abstract:
Elevated-temperature polyol-based colloidal-chemistry approach allows for the development of size-tunable (50 and 86 nm) assemblies of maghemite iso-oriented nanocrystals, with enhanced magnetization. 1H-Nuclear Magnetic Resonance (NMR) relaxometric experiments show that the ferrimagnetic cluster-like colloidal entities exhibit a remarkable enhancement (4 to 5 times) in the transverse relaxivity,…
▽ More
Elevated-temperature polyol-based colloidal-chemistry approach allows for the development of size-tunable (50 and 86 nm) assemblies of maghemite iso-oriented nanocrystals, with enhanced magnetization. 1H-Nuclear Magnetic Resonance (NMR) relaxometric experiments show that the ferrimagnetic cluster-like colloidal entities exhibit a remarkable enhancement (4 to 5 times) in the transverse relaxivity, if compared to that of the superparamagnetic contrast agent Endorem, over an extended frequency range (1-60 MHz). The marked increase of the transverse relaxivity r2 at a clinical magnetic field strength (1.41 T), which is 405.1 and 508.3 mM-1 s-1 for small and large assemblies respectively, allows to relate the observed response to the raised intra-aggregate magnetic material volume fraction. Furthermore, cell tests with murine fibroblast culture medium confirmed the cell viability in presence of the clusters. We discuss the NMR dispersion profiles on the basis of relaxivity models to highlight the magneto-structural characteristics of the materials for improved T2-weighted magnetic resonance images.
△ Less
Submitted 21 March, 2014;
originally announced March 2014.
-
Infrastructure for Detector Research and Development towards the International Linear Collider
Authors:
J. Aguilar,
P. Ambalathankandy,
T. Fiutowski,
M. Idzik,
Sz. Kulis,
D. Przyborowski,
K. Swientek,
A. Bamberger,
M. Köhli,
M. Lupberger,
U. Renz,
M. Schumacher,
Andreas Zwerger,
A. Calderone,
D. G. Cussans,
H. F. Heath,
S. Mandry,
R. F. Page,
J. J. Velthuis,
D. Attié,
D. Calvet,
P. Colas,
X. Coppolani,
Y. Degerli,
E. Delagnes
, et al. (252 additional authors not shown)
Abstract:
The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infras…
▽ More
The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry.
△ Less
Submitted 23 January, 2012;
originally announced January 2012.
-
Magnetic properties and spin dynamics in single molecule paramagnets Cu6Fe and Cu6Co
Authors:
P. Khuntia,
M. Mariani,
M. C. Mozzati,
L. Sorace,
F. Orsini,
A. Lascialfari,
F. Borsa,
M. Andruh,
C. Maxim
Abstract:
The magnetic properties and the spin dynamics of two molecular magnets have been investigated by magnetization and d.c. susceptibility measurements, Electron Paramagnetic Resonance (EPR) and proton Nuclear Magnetic Resonance (NMR) over a wide range of temperature (1.6-300K) at applied magnetic fields, H=0.5 and 1.5 Tesla. The two molecular magnets consist of CuII(saldmen)(H2O)}6{FeIII(CN)6}](ClO…
▽ More
The magnetic properties and the spin dynamics of two molecular magnets have been investigated by magnetization and d.c. susceptibility measurements, Electron Paramagnetic Resonance (EPR) and proton Nuclear Magnetic Resonance (NMR) over a wide range of temperature (1.6-300K) at applied magnetic fields, H=0.5 and 1.5 Tesla. The two molecular magnets consist of CuII(saldmen)(H2O)}6{FeIII(CN)6}](ClO4)38H2O in short Cu6Fe and the analog compound with cobalt, Cu6Co. It is found that in Cu6Fe whose magnetic core is constituted by six Cu2+ ions and one Fe3+ ion all with s=1/2, a weak ferromagnetic interaction between Cu2+ moments through the central Fe3+ ion with J = 0.14 K is present, while in Cu6Co the Co3+ ion is diamagnetic and the weak interaction is antiferromagnetic with J = -1.12 K. The NMR spectra show the presence of non equivalent groups of protons with a measurable contact hyperfine interaction consistent with a small admixture of s-wave function with the d-function of the magnetic ion. The NMR relaxation results are explained in terms of a single ion (Cu2+, Fe3+, Co3+) uncorrelated spin dynamics with an almost temperature independent correlation time due to the weak magnetic exchange interaction. We conclude that the two molecular magnets studied here behave as single molecule paramagnets with a very weak intramolecular interaction, almost of the order of the dipolar intermolecular interaction. Thus they represent a new class of molecular magnets which differ from the single molecule magnets investigated up to now, where the intramolecular interaction is much larger than the intermolecular one.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
M.i.p. detection performances of a 100 us read-out CMOS pixel sensor with digitised outputs
Authors:
Marc Winter,
Jerome Baudot,
Auguste Besson,
Claude Colledani,
Yavuz Degerli,
Rita De Masi,
Andrei Dorokhov,
Guy Doziere,
Wojciech Dulinski,
Marie Gelin,
Fabrice Guilloux,
Abdelkader Himmi,
Christine Hu-Guo,
Frederic Morel,
Fabienne Orsini,
Isabelle Valin,
Georgios Voutsinas
Abstract:
Swift, high resolution CMOS pixel sensors are being developed for the ILC vertex detector, aiming to allow approaching the interaction point very closely. A major issue is the time resolution of the sensors needed to deal with the high occupancy generated by the beam related background. A 128x576 pixel sensor providing digitised outputs at a read-out time of 92.5 us, was fabricated in 2008 withi…
▽ More
Swift, high resolution CMOS pixel sensors are being developed for the ILC vertex detector, aiming to allow approaching the interaction point very closely. A major issue is the time resolution of the sensors needed to deal with the high occupancy generated by the beam related background. A 128x576 pixel sensor providing digitised outputs at a read-out time of 92.5 us, was fabricated in 2008 within the EU project EUDET, and tested with charged particles at the CERN-SPS. Its prominent performances in terms of noise, detection efficiency versus fake hit rate, spatial resolution and radiation tolerance are overviewed. They validate the sensor architecture.
△ Less
Submitted 16 February, 2009;
originally announced February 2009.
-
Radiation Induced Effects in a Monolithic Active Pixel Sensor : The Mimosa8 Chip
Authors:
Nicolas Fourches,
M. Besançon,
R. Chipaux,
Y. Li,
P. Lutz,
F. Orsini
Abstract:
We have studied the effects of ionizing irradiation from a 60Co source and the effects of neutron irradiation on a Monolithic Active Pixel Sensor Chip(MIMOSA8). A previous report was devoted solely to the neutron-induced effects. We show that extended defects due to the neutron damage changes the distribution of the pixels pedestals. This is mainly due to the increase of the dark generation curr…
▽ More
We have studied the effects of ionizing irradiation from a 60Co source and the effects of neutron irradiation on a Monolithic Active Pixel Sensor Chip(MIMOSA8). A previous report was devoted solely to the neutron-induced effects. We show that extended defects due to the neutron damage changes the distribution of the pixels pedestals. This is mainly due to the increase of the dark generation current due to the presence of deep traps in the depleted zones of the sensors. Alternatively, the exposure to ionizing irradiation increases the pedestals in a more homogeneous way, this coming from the generation of interface states at the Si/SiO2 interface supplemented by the presence of positively charged traps in the oxides. the sensors' leakage current is then increased. We discuss the results in view of increasing the radiation-hardness of the MAPS, bearing in mind that these chips were not designed with any rad-tol layout technique.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.
