Showing 1–30 of 30 results for author: Oosterkamp, T H

Current experimental upper bounds on spacetime diffusion

Authors: Martijn Janse, Dennis G. Uitenbroek, Loek van Everdingen, Jaimy Plugge, Bas Hensen, Tjerk H. Oosterkamp

Abstract: A consistent theory describing the dynamics of quantum systems interacting on a classical space-time was recently put forward by Oppenheim et al..[1, 2]. Quantum states may retain their coherence, at the cost of some amount of stochasticity of the spacetime metric, characterized by a spacetime diffusion parameter. Here, we report existing experimental upper bounds on such space-time diffusion, bas… ▽ More A consistent theory describing the dynamics of quantum systems interacting on a classical space-time was recently put forward by Oppenheim et al..[1, 2]. Quantum states may retain their coherence, at the cost of some amount of stochasticity of the spacetime metric, characterized by a spacetime diffusion parameter. Here, we report existing experimental upper bounds on such space-time diffusion, based on a review of several types of experiments with very low force noise over a broad range of test masses from single atoms to several kilograms. We find an upper bound at least 15 orders of magnitude lower as compared to the initial bounds for explicit models presented by Oppenheimn et al. The results presented here provide a path forward for future experiments that can help evaluate classical-quantum theories △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 8 pages, 1 figure, 1 table

Measuring gravity with milligram levitated masses

Authors: Tim M. Fuchs, Dennis G. Uitenbroek, Jaimy Plugge, Noud van Halteren, Jean-Paul van Soest, Andrea Vinante, Hendrik Ulbricht, Tjerk H. Oosterkamp

Abstract: Gravity differs from all other known fundamental forces since it is best described as a curvature of spacetime. For that reason it remains resistant to unifications with quantum theory. Gravitational interaction is fundamentally weak and becomes prominent only at macroscopic scales. This means, we do not know what happens to gravity in the microscopic regime where quantum effects dominate, and whe… ▽ More Gravity differs from all other known fundamental forces since it is best described as a curvature of spacetime. For that reason it remains resistant to unifications with quantum theory. Gravitational interaction is fundamentally weak and becomes prominent only at macroscopic scales. This means, we do not know what happens to gravity in the microscopic regime where quantum effects dominate, and whether quantum coherent effects of gravity become apparent. Levitated mechanical systems of mesoscopic size offer a probe of gravity, while still allowing quantum control over their motional state. This regime opens the possibility of table-top testing of quantum superposition and entanglement in gravitating systems. Here we show gravitational coupling between a levitated sub-millimeter scale magnetic particle inside a type-I superconducting trap and kg source masses, placed approximately half a meter away. Our results extend gravity measurements to low gravitational forces of attonewton and underline the importance of levitated mechanical sensors. Specifically, at a frequency of 26.7 Hz, a mass of 0.4 mg and showing Q-factors in excess of 10$^7$, we obtained a force noise of 0.5 $fN\sqrt{Hz}$ . We simultaneously detect the other 5 rotational and translational degrees of freedom. △ Less

Submitted 22 January, 2024; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: 13 pages, with 13 pages supplementary materials

Increased muon field at surface and substrate interface of palladium thin films

Authors: Gesa Welker, Martin de Wit, Tjerk H. Oosterkamp, John A. Mydosh, Andreas Suter, Thomas Prokscha, Lucia Bossoni

Abstract: We performed depth-dependent low-energy muon spin spectroscopy ($μ$SR) studies on three palladium 100 nm thin films, both undoped and doped with 170 ppm of iron. Muons implanted in the surface and substrate interface region probe an increased local magnetic field compared to the inner part of the sample. The field increase extends over a few nanometers, it is temperature-independent (in the range… ▽ More We performed depth-dependent low-energy muon spin spectroscopy ($μ$SR) studies on three palladium 100 nm thin films, both undoped and doped with 170 ppm of iron. Muons implanted in the surface and substrate interface region probe an increased local magnetic field compared to the inner part of the sample. The field increase extends over a few nanometers, it is temperature-independent (in the range of 3.7 - 100 K), stronger for the iron-doped samples and accompanied by an increase in local field inhomogeneity. We consider various potential origins for this magnetic surface state, such as adsorbents and supressed d-states. Our conclusion is that orbital moments induced at the surface / interface by localized spins and charges are the most likely explanation, potentially accompanied by magnetic moments due to crystal irregularities. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Magnetic cooling and vibration isolation of a sub-kHz mechanical resonator

Authors: Bernard van Heck, Tim Fuchs, Jaimy Plugge, Wim A. Bosch, Tjerk H. Oosterkamp

Abstract: We report recent progress towards the realization of a sub-mK, low-vibration environment at the bottom stage of a dry dilution refrigerator for use in mechanical tests of quantum mechanics. Using adiabatic nuclear demagnetization, we have cooled a silicon cantilever force sensor to $T\approx 1$ mK. The temperature of the tip-holder of the cantilever chip was determined via a primary magnetic flux… ▽ More We report recent progress towards the realization of a sub-mK, low-vibration environment at the bottom stage of a dry dilution refrigerator for use in mechanical tests of quantum mechanics. Using adiabatic nuclear demagnetization, we have cooled a silicon cantilever force sensor to $T\approx 1$ mK. The temperature of the tip-holder of the cantilever chip was determined via a primary magnetic flux noise thermometer. The quality factor of the cantilever continues to increase with decreasing temperature, reaching $Q\approx 4\cdot 10^4$ at $2$ mK. To demonstrate that the vibration isolation is not compromised, we report the detection of the thermal motion of the cantilever down to $T \approx 20$ mK, only limited by the coupling to the SQUID readout circuit. We discuss feasible improvements that will allow us to probe unexplored regions of the parameter space of continuous spontaneous localization models. △ Less

Submitted 7 February, 2023; v1 submitted 24 August, 2022; originally announced August 2022.

Comments: Submission to the special issue "Mechanical Resonators at Low Temperatures" in Journal of Low Temperature Physics

Journal ref: J. Low Temp. Phys. 210, 588-609 (2023)

An experimental proposal to study collapse of the wave function in travelling-wave parametric amplifiers

Authors: T. H. A. van der Reep, L. Rademaker, X. G. A. Le Large, R. H. Guis, T. H. Oosterkamp

Abstract: The read-out of a microwave qubit state occurs using an amplification chain that enlarges the quantum state to a signal detectable with a classical measurement apparatus. However, at what point in this process is the quantum state really 'measured'? In order to investigate whether the `measurement' takes place in the amplification chain, in which a parametric amplifier is often chosen as the first… ▽ More The read-out of a microwave qubit state occurs using an amplification chain that enlarges the quantum state to a signal detectable with a classical measurement apparatus. However, at what point in this process is the quantum state really 'measured'? In order to investigate whether the `measurement' takes place in the amplification chain, in which a parametric amplifier is often chosen as the first amplifier, it is proposed to construct a microwave interferometer that has such an amplifier added to each of its arms. Feeding the interferometer with single photons, the interference visibility depends on the gain of the amplifiers and whether a measurement collapse has taken place during the amplification process. The visibility as given by standard quantum mechanics is calculated as a function of gain, insertion loss and temperature. We find a visibility of 1/3 in the limit of large gain without taking into account losses, which is reduced to 0.26 in case the insertion loss of the amplifiers is 2.2 dB at a temperature of 50 mK. It is shown that if the wave function collapses within the interferometer, the measured visibility is reduced compared to its magnitude predicted by standard quantum mechanics once this collapse process sets in. △ Less

Submitted 13 January, 2021; v1 submitted 5 November, 2018; originally announced November 2018.

Comments: 21 pages and 23 figures (including appendices and subfigures). Accepted version

Journal ref: Phys. Status Solidi B 2000567 (2021)

Flux compensation for SQUID-detected Magnetic Resonance Force Microscopy

Authors: Martin de Wit, Gesa Welker, Frederik G. Hoekstra, Tjerk H. Oosterkamp

Abstract: One of the major challenges in performing SQUID-detected Magnetic Resonance Force Microscopy (MRFM) at milliKelvin temperatures is the crosstalk between the radiofrequency (RF) pulses used for the spin manipulation and the SQUID-based detection mechanism. Here we present an approach based on balancing the flux crosstalk using an on-chip feedback coil coupled to the SQUID. This approach does not re… ▽ More One of the major challenges in performing SQUID-detected Magnetic Resonance Force Microscopy (MRFM) at milliKelvin temperatures is the crosstalk between the radiofrequency (RF) pulses used for the spin manipulation and the SQUID-based detection mechanism. Here we present an approach based on balancing the flux crosstalk using an on-chip feedback coil coupled to the SQUID. This approach does not require any additional components near the location of the sample, and can therefore be applied to any SQUID-based detection scheme to cancel predictable RF interference. We demonstrate the effectiveness of our approach by showing that we can almost completely negate flux crosstalk with an amplitude of up to several $Φ_0$. This technical achievement allows for complicated magnetic resonance protocols to be performed at temperatures below 50 mK. △ Less

Submitted 30 October, 2018; originally announced October 2018.

Journal ref: Cryogenics Volume 98, March 2019, Pages 67-70

Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator

Authors: Martin de Wit, Gesa Welker, Kier Heeck, Frank M. Buters, Hedwig J. Eerkens, Gert Koning, Harmen van der Meer, Dirk Bouwmeester, Tjerk H. Oosterkamp

Abstract: We present the design and implementation of a mechanical low-pass filter vibration isolation used to reduce the vibrational noise in a cryogen-free dilution refrigerator operated at 10 mK, intended for scanning probe techniques. We discuss the design guidelines necessary to meet the competing requirements of having a low mechanical stiffness in combination with a high thermal conductance. We demon… ▽ More We present the design and implementation of a mechanical low-pass filter vibration isolation used to reduce the vibrational noise in a cryogen-free dilution refrigerator operated at 10 mK, intended for scanning probe techniques. We discuss the design guidelines necessary to meet the competing requirements of having a low mechanical stiffness in combination with a high thermal conductance. We demonstrate the effectiveness of our approach by measuring the vibrational noise levels of an ultrasoft mechanical resonator positioned above a SQUID. Starting from a cryostat base temperature of 8 mK, the vibration isolation can be cooled to 10.5 mK, with a cooling power of 113 $μ$W at 100 mK. We use the low vibrations and low temperature to demonstrate an effective cantilever temperature of less than 20 mK. This results in a force sensitivity of less than 500 zN/$\sqrt{\mathrm{Hz}}$, and an integrated frequency noise as low as 0.4 mHz in a 1 Hz measurement bandwidth. △ Less

Submitted 16 October, 2018; originally announced October 2018.

Journal ref: Review of Scientific Instruments, 90, 015112 (2019)

Human brain ferritin studied by muon Spin Rotation: a pilot study

Authors: Lucia Bossoni, Laure Grand Moursel, Marjolein Bulk, Brecht G. Simon, Andrew Webb, Louise van der Weerd, Martina Huber, Pietro Carretta, Alessandro Lascialfari, Tjerk H. Oosterkamp

Abstract: Muon Spin Rotation is employed to investigate the spin dynamics of ferritin proteins isolated from the brain of an Alzheimer's disease (AD) patient and of a healthy control, using a sample of horse-spleen ferritin as a reference. A model based on the Néel theory of superparamagnetism is developed in order to interpret the spin relaxation rate of the muons stopped by the core of the protein. Using… ▽ More Muon Spin Rotation is employed to investigate the spin dynamics of ferritin proteins isolated from the brain of an Alzheimer's disease (AD) patient and of a healthy control, using a sample of horse-spleen ferritin as a reference. A model based on the Néel theory of superparamagnetism is developed in order to interpret the spin relaxation rate of the muons stopped by the core of the protein. Using this model, our preliminary observations show that ferritins from the healthy control are filled with a mineral compatible with ferrihydrite, while ferritins from the AD patient contain a crystalline phase with a larger magnetocrystalline anisotropy, possibly compatible with magnetite or maghemite. △ Less

Submitted 22 May, 2017; v1 submitted 21 February, 2017; originally announced February 2017.

Comments: 16 pages, 9 figures

Journal ref: Journal of Physics: Condensed Matter, Volume 29, Number 41 (2017)

A method for mechanical generation of radio frequency fields in nuclear magnetic resonance force microscopy

Authors: J. J. T. Wagenaar, A. M. J. den Haan, R. J. Donkersloot, F. Marsman, M. de Wit, L. Bossoni, T. H. Oosterkamp

Abstract: We present an innovative method for magnetic resonance force microscopy (MRFM) with ultra-low dissipation, by using the higher modes of the mechanical detector as radio frequency (rf) source. This method allows MRFM on samples without the need to be close to an rf source. Furthermore, since rf sources require currents that give dissipation, our method enables nuclear magnetic resonance experiments… ▽ More We present an innovative method for magnetic resonance force microscopy (MRFM) with ultra-low dissipation, by using the higher modes of the mechanical detector as radio frequency (rf) source. This method allows MRFM on samples without the need to be close to an rf source. Furthermore, since rf sources require currents that give dissipation, our method enables nuclear magnetic resonance experiments at ultra-low temperatures. Removing the need for an on-chip rf source is an important step towards a MRFM which can be widely used in condensed matter physics. △ Less

Submitted 19 September, 2016; originally announced September 2016.

Comments: 7 pages, 5 figures, to be submitted to Physical Review Applied

Journal ref: Phys. Rev. Applied 7, 024019 (2017)

Probing the Nuclear Spin-Lattice Relaxation Time at the Nanoscale

Authors: J. J. T. Wagenaar, A. M. J. den Haan, J. M. de Voogd, L. Bossoni, T. A. de Jong, M. de Wit, K. M. Bastiaans, D. J. Thoen, A. Endo, T. M. Klapwijk, J. Zaanen, T. H. Oosterkamp

Abstract: Nuclear spin-lattice relaxation times are measured on copper using magnetic resonance force microscopy performed at temperatures down to 42 mK. The low temperature is verified by comparison with the Korringa relation. Measuring spin-lattice relaxation times locally at very low temperatures opens up the possibility to measure the magnetic properties of inhomogeneous electron systems realized in oxi… ▽ More Nuclear spin-lattice relaxation times are measured on copper using magnetic resonance force microscopy performed at temperatures down to 42 mK. The low temperature is verified by comparison with the Korringa relation. Measuring spin-lattice relaxation times locally at very low temperatures opens up the possibility to measure the magnetic properties of inhomogeneous electron systems realized in oxide interfaces, topological insulators and other strongly correlated electron systems such as high-Tc superconductors. △ Less

Submitted 27 June, 2016; v1 submitted 14 March, 2016; originally announced March 2016.

Comments: We revised the manuscript by including the supplemental material. The manuscript is changed from a Letter to a Research Article after change of journal

Upper bounds on spontaneous wave-function collapse models using millikelvin-cooled nanocantilevers

Authors: A. Vinante, M. Bahrami, A. Bassi, O. Usenko, G. Wijts, T. H. Oosterkamp

Abstract: Collapse models predict a tiny violation of energy conservation, as a consequence of the spontaneous collapse of the wave function. This property allows to set experimental bounds on their parameters. We consider an ultrasoft magnetically tipped nanocantilever cooled to millikelvin temperature. The thermal noise of the cantilever fundamental mode has been accurately estimated in the range… ▽ More Collapse models predict a tiny violation of energy conservation, as a consequence of the spontaneous collapse of the wave function. This property allows to set experimental bounds on their parameters. We consider an ultrasoft magnetically tipped nanocantilever cooled to millikelvin temperature. The thermal noise of the cantilever fundamental mode has been accurately estimated in the range $0.03-1$ K, and any other excess noise is found to be negligible within the experimental uncertainty. From the measured data and the cantilever geometry, we estimate the upper bound on the Continuous Spontaneous Localization (CSL) collapse rate in a wide range of the correlation length $r_C$. Our upper bound improves significantly previous constraints for $r_C>10^{-6}$ m, and partially excludes the enhanced collapse rate suggested by Adler. We discuss future improvements. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Comments: 11 pages, 9 figures

Journal ref: Phys. Rev. Lett. 116, 090402 (2016)

Spin-mediated dissipation and frequency shifts of a cantilever at milliKelvin temperatures

Authors: A. M. J. den Haan, J. J. T. Wagenaar, J. M. de Voogd, G. Koning, T. H. Oosterkamp

Abstract: We measure the dissipation and frequency shift of a magnetically coupled cantilever in the vicinity of a silicon chip, down to $25$ mK. The dissipation and frequency shift originates from the interaction with the unpaired electrons, associated with the dangling bonds in the native oxide layer of the silicon, which form a two dimensional system of electron spins. We approach the sample with a… ▽ More We measure the dissipation and frequency shift of a magnetically coupled cantilever in the vicinity of a silicon chip, down to $25$ mK. The dissipation and frequency shift originates from the interaction with the unpaired electrons, associated with the dangling bonds in the native oxide layer of the silicon, which form a two dimensional system of electron spins. We approach the sample with a $3.43$ $μ$m-diameter magnetic particle attached to an ultrasoft cantilever, and measure the frequency shift and quality factor as a function of temperature and the distance. Using a recent theoretical analysis [J. M. de Voogd et al., arXiv:1508.07972 (2015)] of the dynamics of a system consisting of a spin and a magnetic resonator, we are able to fit the data and extract the relaxation time $T_1=0.39\pm0.08$ ms and spin density $σ=0.14\pm0.01$ spins per nm$^2$. Our analysis shows that at temperatures $\leq500$ mK magnetic dissipation is an important source of non-contact friction. △ Less

Submitted 21 January, 2016; v1 submitted 3 September, 2015; originally announced September 2015.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 92, 235441 (2015)

Dissipation and resonance frequency shift of a resonator magnetically coupled to a semiclassical spin

Authors: J. M. de Voogd, J. J. T. Wagenaar, T. H. Oosterkamp

Abstract: We calculate the change of the properties of a resonator, when coupled to a semiclassical spin by means of the magnetic field. Starting with the Lagrangian of the complete system, we provide an analytical expression for the linear response function for the motion of the resonator, thereby considering the influence of the resonator on the spin and vice versa. This analysis shows that the resonance… ▽ More We calculate the change of the properties of a resonator, when coupled to a semiclassical spin by means of the magnetic field. Starting with the Lagrangian of the complete system, we provide an analytical expression for the linear response function for the motion of the resonator, thereby considering the influence of the resonator on the spin and vice versa. This analysis shows that the resonance frequency and effective dissipation factor can change significantly due to the relaxation times of the spin. We first derive this for a system consisting of a spin and mechanical resonator and thereafter apply the same calculations to an electromagnetic resonator. Moreover, the applicability of the method is generalized to a resonator coupled to general two and more level systems, providing a key to understand some of the problems of two level systems in quantum devices. △ Less

Submitted 19 October, 2016; v1 submitted 31 August, 2015; originally announced August 2015.

Comments: 10 pages, 4 figures, Appendices A-D included (page 8-10)

Probing the magnetic moment of FePt micromagnets prepared by Focused Ion Beam milling

Authors: H. C. Overweg, A. M. J. den Haan, H. J. Eerkens, P. F. A. Alkemade, A. L. La Rooij, R. J. C. Spreeuw, L. Bossoni, T. H. Oosterkamp

Abstract: We investigate the degradation of the magnetic moment of a 300 nm thick FePt film induced by Focused Ion Beam (FIB) milling. A $1~μ\mathrm{m} \times 8~μ\mathrm{m}$ rod is milled out of a film by a FIB process and is attached to a cantilever by electron beam induced deposition. Its magnetic moment is determined by frequency-shift cantilever magnetometry. We find that the magnetic moment of the rod… ▽ More We investigate the degradation of the magnetic moment of a 300 nm thick FePt film induced by Focused Ion Beam (FIB) milling. A $1~μ\mathrm{m} \times 8~μ\mathrm{m}$ rod is milled out of a film by a FIB process and is attached to a cantilever by electron beam induced deposition. Its magnetic moment is determined by frequency-shift cantilever magnetometry. We find that the magnetic moment of the rod is $μ= 1.1 \pm 0.1 \times 10 ^{-12} \mathrm{Am}^2$, which implies that 70% of the magnetic moment is preserved during the FIB milling process. This result has important implications for atom trap** and magnetic resonance force microscopy (MRFM), that are addressed in this paper. △ Less

Submitted 23 August, 2015; v1 submitted 27 April, 2015; originally announced April 2015.

Comments: 4 pages, 4 figures

Journal ref: Appl. Phys. Lett. 107, 072402 (2015)

A clock containing a massive object in a superposition of states; what makes Penrosian wavefunction collapse tick?

Authors: Tjerk H. Oosterkamp, Jan Zaanen

Abstract: Penrose has been advocating the view that the collapse of the wave function is rooted in the incompatibility between general relativity and quantum mechanics. On the basis of conceptual analysis, he arrived at an estimate for the collapse time. To better understand his estimate, in this paper we present a thought experiment, which singles out the role of time-dilations in massive superpositions. F… ▽ More Penrose has been advocating the view that the collapse of the wave function is rooted in the incompatibility between general relativity and quantum mechanics. On the basis of conceptual analysis, he arrived at an estimate for the collapse time. To better understand his estimate, in this paper we present a thought experiment, which singles out the role of time-dilations in massive superpositions. First we investigate the behavior of a hypothetical clock containing a component which can be in a superposition of states. The clock contains a massive object, whose only purpose is to introduce a curvature of space time into the problem. We find that a state of this massive object with a smaller radius, but with the same mass, experiences a larger time dilation. Considering a coherent superposition of the large and small object, introduces an ambiguity in the definition of a common time for both states. We assert that this time ambiguity can be thought to affect the time evolution of a state in different ways and that the relative phase difference between these different interpretations can be calculated. We postulate that the wave function collapse will occur when this phase difference becomes of order unity. An absolute energy scale enters this equation and we recover Penrose's estimate for the collapse time by equating the absolute energy scale to the rest mass of the object. △ Less

Submitted 3 October, 2016; v1 submitted 31 December, 2013; originally announced January 2014.

Comments: 9 pages, 3 figures, work presented at Galiano Island 2013 conference on 'intrinsic decoherence in nature' 22-25 May 2013

Atomic resolution STM in a cryogen free dilution refrigerator at 15 mK

Authors: A. M. J. den Haan, G. H. C. J. Wijts, F. Galli, O. Usenko, G. J. C. van Baarle, D. J. van der Zalm, T. H. Oosterkamp

Abstract: Pulse tube refrigerators are becoming more common, because they are cost efficient and demand less handling than conventional (wet) refrigerators. However, a downside of a pulse tube system is the vibration level at the cold-head, which is in most designs several micrometers. We implemented vibration isolation techniques which significantly reduced vibration levels at the experiment. These optimiz… ▽ More Pulse tube refrigerators are becoming more common, because they are cost efficient and demand less handling than conventional (wet) refrigerators. However, a downside of a pulse tube system is the vibration level at the cold-head, which is in most designs several micrometers. We implemented vibration isolation techniques which significantly reduced vibration levels at the experiment. These optimizations were necessary for the vibration sensitive Magnetic Resonance Force Microscopy experiments (MRFM) at milli-kelvin temperatures for which the cryostat is intended. With these modifications we show atomic resolution STM on graphite. This is promising for scanning probe microscopy applications at very low temperatures. △ Less

Submitted 2 February, 2014; v1 submitted 20 December, 2013; originally announced December 2013.

Comments: 6 pages, 10 figures and 1 video 1st revision: added label a and b to figures 2 and 3 typo at page 5 at the end of section 4 (Results): replaced 10^-10 m/sqrt(Hz) to 10^-12 m/sqrt(Hz) (contact [email protected] for the calculation)

Journal ref: Rev. Sci. Instrum. 85, 035112 (2014)

Friction as Contrast Mechanism in Heterodyne Force Microscopy

Authors: G. J. Verbiest, T. H. Oosterkamp, M. J. Rost

Abstract: The nondestructive imaging of subsurface structures on the nanometer scale has been a long-standing desire in both science and industry. A few impressive images were published so far that demonstrate the general feasibility by combining ultrasound with an Atomic Force Microscope. From different excitation schemes, Heterodyne Force Microscopy seems to be the most promising candidate delivering the… ▽ More The nondestructive imaging of subsurface structures on the nanometer scale has been a long-standing desire in both science and industry. A few impressive images were published so far that demonstrate the general feasibility by combining ultrasound with an Atomic Force Microscope. From different excitation schemes, Heterodyne Force Microscopy seems to be the most promising candidate delivering the highest contrast and resolution. However, the physical contrast mechanism is unknown, thereby preventing any quantitative analysis of samples. Here we show that friction at material boundaries within the sample is responsible for the contrast formation. This result is obtained by performing a full quantitative analysis, in which we compare our experimentally observed contrasts with simulations and calculations. Surprisingly, we can rule out all other generally believed responsible mechanisms, like Rayleigh scattering, sample (visco)elasticity, dam** of the ultrasonic tip motion, and ultrasound attenuation. Our analytical description paves the way for quantitative SubSurface-AFM imaging. △ Less

Submitted 8 February, 2016; v1 submitted 4 July, 2013; originally announced July 2013.

Comments: 7 pages main paper + 11 pages supplementary materials

MSC Class: 65Z05

Journal ref: Nanotechnology 28 (2017) 085704

Magnetic Resonance Force Microscopy of paramagnetic electron spins at millikelvin temperatures

Authors: A. Vinante, G. Wijts, O. Usenko, L. Schinkelshoek, T. H. Oosterkamp

Abstract: Magnetic Resonance Force Microscopy (MRFM) is a powerful technique to detect a small number of spins that relies on force-detection by an ultrasoft magnetically tipped cantilever and selective magnetic resonance manipulation of the spins. MRFM would greatly benefit from ultralow temperature operation, because of lower thermomechanical noise and increased thermal spin polarization. Here, we demonst… ▽ More Magnetic Resonance Force Microscopy (MRFM) is a powerful technique to detect a small number of spins that relies on force-detection by an ultrasoft magnetically tipped cantilever and selective magnetic resonance manipulation of the spins. MRFM would greatly benefit from ultralow temperature operation, because of lower thermomechanical noise and increased thermal spin polarization. Here, we demonstrate MRFM operation at temperatures as low as 30 mK, thanks to a recently developed SQUID-based cantilever detection technique which avoids cantilever overheating. In our experiment, we detect dangling bond paramagnetic centers on a silicon surface down to millikelvin temperatures. Fluctuations of such kind of defects are supposedly linked to 1/f magnetic noise and decoherence in SQUIDs as well as in several superconducting and single spin qubits. We find evidence that spin diffusion plays a key role in the low temperature spin dynamics. △ Less

Submitted 7 December, 2011; v1 submitted 17 May, 2011; originally announced May 2011.

Comments: 7 pages, 5 figures

Journal ref: Nature Communications 2, 572 (2011)

Deterministic nano-assembly of a coupled quantum emitter - photonic crystal cavity system

Authors: T. van der Sar, J. Hagemeier, W. Pfaff, E. C. Heeres, S. M. Thon, H. Kim, P. M. Petroff, T. H. Oosterkamp, D. Bouwmeester, R. Hanson

Abstract: The interaction of a single quantum emitter with its environment is a central theme in quantum optics. When placed in highly confined optical fields, such as those created in optical cavities or plasmonic structures, the optical properties of the emitter can change drastically. In particular, photonic crystal (PC) cavities show high quality factors combined with an extremely small mode volume. Eff… ▽ More The interaction of a single quantum emitter with its environment is a central theme in quantum optics. When placed in highly confined optical fields, such as those created in optical cavities or plasmonic structures, the optical properties of the emitter can change drastically. In particular, photonic crystal (PC) cavities show high quality factors combined with an extremely small mode volume. Efficiently coupling a single quantum emitter to a PC cavity is challenging because of the required positioning accuracy. Here, we demonstrate deterministic coupling of single Nitrogen-Vacancy (NV) centers to high-quality gallium phosphide PC cavities, by deterministically positioning their 50 nm-sized host nanocrystals into the cavity mode maximum with few-nanometer accuracy. The coupling results in a 25-fold enhancement of NV center emission at the cavity wavelength. With this technique, the NV center photoluminescence spectrum can be reshaped allowing for efficient generation of coherent photons, providing new opportunities for quantum science. △ Less

Submitted 2 July, 2011; v1 submitted 24 August, 2010; originally announced August 2010.

Comments: 13 pages, 4 figures

Journal ref: Applied Physics Letters 98, 193103 (2011)

A SQUID based read-out of sub-attoNewton force sensor operating at millikelvin temperatures

Authors: O. Usenko, A. Vinante, G. Wijts, T. H. Oosterkamp

Abstract: An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in Magnetic Resonance Force Microscopy (MRFM) [2]. The force sensitivity of a mechanical resonator is typically limited by thermal fluctuations, which calls for detection… ▽ More An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in Magnetic Resonance Force Microscopy (MRFM) [2]. The force sensitivity of a mechanical resonator is typically limited by thermal fluctuations, which calls for detection methods capable of operating at ultralow temperature. Commonly used interferometric techniques, despite their excellent sensitivity, may not be an optimal choice at millikelvin temperatures, because of unwanted resonator heating caused by photon absorption. Although alternative detection techniques based on microwave cavities [3] [4] [5] have shown to perform better at ultralow temperature, these techniques still suffer from the fact that the detection sensitivity decreases as the power input is decreased. Here, we present a measurement approach based on the detection, through a Superconducting Quantum Interference Device (SQUID), of the change of magnetic flux induced in a coil by the motion of a magnetic particle attached to a resonator. This detection scheme avoids direct heating of the resonator, as it does not involve reflecting optical or microwave photons to the resonator. By cooling an ultrasoft silicon resonator to 25 mK, we achieve a force noise of 0.5 aN in a 1 Hz bandwidth. We believe this detection technique can in principle be used even at sub-millikelvin temperatures. Furthermore, it could be used to improve the sensitivity of MRFM experiments, which aim at three dimensional imaging at atomic resolution. △ Less

Submitted 9 July, 2010; originally announced July 2010.

A Nanoscale Experiment Measuring Gravity's Role in Breaking the Unitarity of Quantum Dynamics

Authors: Jasper van Wezel, Tjerk H. Oosterkamp

Abstract: Modern, state of the art nanomechanical devices are capable of creating spatial superpositions that are massive enough to begin to experimentally access the quantum to classical crossover, and thus force us to consider the possible ways in which the usual quantum dynamics may be affected. One recent theoretical proposal describes the crossover from unitary quantum mechanics to classical dynamics a… ▽ More Modern, state of the art nanomechanical devices are capable of creating spatial superpositions that are massive enough to begin to experimentally access the quantum to classical crossover, and thus force us to consider the possible ways in which the usual quantum dynamics may be affected. One recent theoretical proposal describes the crossover from unitary quantum mechanics to classical dynamics as a form of spontaneous symmetry breaking. Here, we propose a specific experimental setup capable of identifying the source of unitarity breaking in such a mechanism. The experiment is aimed specifically at clarifying the role played by gravity, and distinguishes the resulting dynamics from that suggested by alternative scenarios for the quantum to classical crossover. We give both a theoretical description of the expected dynamics, and a discussion of the involved experimental parameter values and the proposed experimental protocol. △ Less

Submitted 11 August, 2011; v1 submitted 18 December, 2009; originally announced December 2009.

Comments: 11 pages, 5 figures; final version

Journal ref: Proc. R. Soc. A, 468, 35 (2012)

Nanopositioning of a diamond nanocrystal containing a single NV defect center

Authors: T. van der Sar, E. C. Heeres, G. M. Dmochowski, G. de Lange, L. Robledo, T. H. Oosterkamp, R. Hanson

Abstract: Precise control over the position of a single quantum object is important for many experiments in quantum science and nanotechnology. We report on a technique for high-accuracy positioning of individual diamond nanocrystals. The positioning is done with a home-built nanomanipulator under real-time scanning electron imaging, yielding an accuracy of a few nanometers. This technique is applied to p… ▽ More Precise control over the position of a single quantum object is important for many experiments in quantum science and nanotechnology. We report on a technique for high-accuracy positioning of individual diamond nanocrystals. The positioning is done with a home-built nanomanipulator under real-time scanning electron imaging, yielding an accuracy of a few nanometers. This technique is applied to pick up, move and position a single NV defect center contained in a diamond nanocrystal. We verify that the unique optical and spin properties of the NV center are conserved by the positioning process. △ Less

Submitted 19 March, 2009; originally announced March 2009.

Comments: 3 pages, 3 figures; high-resolution version available at http://www.ns.tudelft.nl/qt

Journal ref: Appl. Phys. Lett. 94, 173104 (2009)

Mechanical properties of Pt monatomic chains

Authors: T. Shiota, A. I. Mares, A. M. C. Valkering, T. H. Oosterkamp, J. M. van Ruitenbeek

Abstract: The mechanical properties of platinum monatomic chains were investigated by simultaneous measurement of an effective stiffness and the conductance using our newly developed mechanically controllable break junction (MCBJ) technique with a tuning fork as a force sensor. When stretching a monatomic contact (two-atom chain), the stiffness and conductance increases at the early stage of stretching an… ▽ More The mechanical properties of platinum monatomic chains were investigated by simultaneous measurement of an effective stiffness and the conductance using our newly developed mechanically controllable break junction (MCBJ) technique with a tuning fork as a force sensor. When stretching a monatomic contact (two-atom chain), the stiffness and conductance increases at the early stage of stretching and then decreases just before breaking, which is attributed to a transition of the chain configuration and bond weakening. A statistical analysis was made to investigate the mechanical properties of monatomic chains. The average stiffness shows minima at the peak positions of the length-histogram. From this result we conclude that the peaks in the length-histogram are a measure of the number of atoms in the chains, and that the chains break from a strained state. Additionally, we find that the smaller the initial stiffness of the chain is, the longer the chain becomes. This shows that softer chains can be stretched longer. △ Less

Submitted 22 January, 2008; v1 submitted 31 July, 2007; originally announced July 2007.

Comments: 6 pages, 5 figures

Photon Assisted Tunneling in Quantum Dots

Authors: W. G. van der Wiel, T. H. Oosterkamp, S. De Franceschi, C. J. P. M. Harmans, L. P. Kouwenhoven

Abstract: We review experiments on single electron transport through single quantum dots in the presence of a microwave signal. In the case of a small dot with well-resolved discrete energy states, the applied high-frequency signal allows for inelastic tunnel events that involve the exchange of photons with the microwave field. These photon assisted tunneling (PAT) processes give rise to sideband resonanc… ▽ More We review experiments on single electron transport through single quantum dots in the presence of a microwave signal. In the case of a small dot with well-resolved discrete energy states, the applied high-frequency signal allows for inelastic tunnel events that involve the exchange of photons with the microwave field. These photon assisted tunneling (PAT) processes give rise to sideband resonances in addition to the main resonance. Photon absorption can also lead to tunneling via excited states instead of tunneling via the ground state of the quantum dot. △ Less

Submitted 3 April, 2002; v1 submitted 26 April, 1999; originally announced April 1999.

Stability of the maximum density droplet in quantum dots at high magnetic fields

Authors: T. H. Oosterkamp, J. W. Janssen, L. P. Kouwenhoven, D. G. Austing, T. Honda, S. Tarucha

Abstract: We have measured electron transport through a vertical quantum dot containing a tunable number of electrons between 0 and 40. Over some region in magnetic field the electrons are spin polarized and occupy successive angular momentum states, i.e. the maximum density droplet (MDD) state. The stability region where the MDD state is the ground state, decreases for increasing electron number. The ins… ▽ More We have measured electron transport through a vertical quantum dot containing a tunable number of electrons between 0 and 40. Over some region in magnetic field the electrons are spin polarized and occupy successive angular momentum states, i.e. the maximum density droplet (MDD) state. The stability region where the MDD state is the ground state, decreases for increasing electron number. The instability of the MDD is accompanied by a redistribution of charge which increases the area of the electron droplet. △ Less

Submitted 14 October, 1998; originally announced October 1998.

Comments: 8 pages, submitted to Phys. Rev. Lett

Microwave spectroscopy on a quantum-dot molecule

Authors: T. H. Oosterkamp, T. Fujisawa, W. G. van der Wiel, K. Ishibashi, R. V. Hijman, S. Tarucha, L. P. Kouwenhoven

Abstract: Quantum dots are small conductive regions in a semiconductor, containing a variable number of electrons (N=1 to 1000) that occupy well defined discrete quantum states. They are often referred to as artificial atoms with the unique property that they can be connected to current and voltage contacts. This allows one to use transport measurements to probe the discrete energy spectra. To continue th… ▽ More Quantum dots are small conductive regions in a semiconductor, containing a variable number of electrons (N=1 to 1000) that occupy well defined discrete quantum states. They are often referred to as artificial atoms with the unique property that they can be connected to current and voltage contacts. This allows one to use transport measurements to probe the discrete energy spectra. To continue the analogy with atoms, two quantum dots can be connected to form an 'artificial molecule'. Depending on the strength of the inter-dot coupling, the two dots can have an ionic binding (i.e. electrons are localized on the individual dots) or a covalent binding (i.e. electrons are delocalized over both dots). The covalent binding leads to a bonding and an anti-bonding state with an energy splitting proportional to the tunnel coupling. In the dc current response to microwave excitation we observe a transition from an ionic bonding to a covalent bonding, when we vary the inter-dot coupling strength. This demonstrates controllable quantum coherence in single electron devices. △ Less

Submitted 9 September, 1998; originally announced September 1998.

Comments: 5 pages, accepted by Nature

Spontaneous Emission Spectrum in Double Quantum Dot Devices

Authors: T. Fujisawa, T. H. Oosterkamp, W. G. van der Wiel, B. W. Broer, R. Aguado, S. Tarucha, L. P. Kouwenhoven

Abstract: A double quantum dot device is a tunable two-level system for electronic energy states. A dc electron current directly measures the rates for elastic and inelastic transitions between the two levels. For inelastic transitions energy is exchanged with bosonic degrees of freedom in the environment. The inelastic transition rates are well described by the Einstein coefficients, relating absorption… ▽ More A double quantum dot device is a tunable two-level system for electronic energy states. A dc electron current directly measures the rates for elastic and inelastic transitions between the two levels. For inelastic transitions energy is exchanged with bosonic degrees of freedom in the environment. The inelastic transition rates are well described by the Einstein coefficients, relating absorption with stimulated and spontaneous emission. The most effectively coupled bosons in the specific environment of our semiconductor device are acoustic phonons. The experiments demonstrate the importance of vacuum fluctuations in the environment for little circuits of coherent quantum devices. △ Less

Submitted 10 August, 1998; originally announced August 1998.

Comments: 5 pages, 3 figures

A Tunable Kondo Effect in Quantum Dots

Authors: Sara M. Cronenwett, Tjerk H. Oosterkamp, Leo P. Kouwenhoven

Abstract: We demonstrate a tunable Kondo effect realized in small quantum dots. We can switch our dot from a Kondo impurity to a non-Kondo system as the number of electrons on the dot is changed from odd to even. We show that the Kondo temperature can be tuned by means of a gate voltage as a single-particle energy state nears the Fermi energy. Measurements of the temperature and magnetic field dependence… ▽ More We demonstrate a tunable Kondo effect realized in small quantum dots. We can switch our dot from a Kondo impurity to a non-Kondo system as the number of electrons on the dot is changed from odd to even. We show that the Kondo temperature can be tuned by means of a gate voltage as a single-particle energy state nears the Fermi energy. Measurements of the temperature and magnetic field dependence of a Coulomb-blockaded dot show good agreement with predictions of both equilibrium and non-equilibrium Kondo effects. △ Less

Submitted 20 April, 1998; originally announced April 1998.

Comments: 8 pages, 4 figures

Changes in the Magnetization of a Double Quantum Dot

Authors: T. H. Oosterkamp, S. F. Godijn, M. J. Uilenreef, Y. V. Nazarov, N. C. van der Vaart, L. P. Kouwenhoven

Abstract: From accurate measurements of the energy states in a double quantum dot we deduce the change in magnetization due to single electron tunneling. As a function of magnetic field we observe crossings and anti-crossings in the energy spectrum. The change in magnetization exhibits wiggles as a function of magnetic field with maximum values of a few effective Bohr magnetons in GaAs. These wiggles are… ▽ More From accurate measurements of the energy states in a double quantum dot we deduce the change in magnetization due to single electron tunneling. As a function of magnetic field we observe crossings and anti-crossings in the energy spectrum. The change in magnetization exhibits wiggles as a function of magnetic field with maximum values of a few effective Bohr magnetons in GaAs. These wiggles are a measure of the chaotic motion of the discrete energy states versus magnetic field. Our results show good agreement with a numeric calculation but deviate significantly from semiclassical estimates. △ Less

Submitted 11 February, 1998; originally announced February 1998.

Comments: 6 pages, plus 3 figures

Excitation Spectra of Circular Few-Electron Quantum Dots

Authors: L. P. Kouwenhoven, T. H. Oosterkamp, M. W. S. Danoesastro, M. Eto, D. G. Austing, T. Honda, S. Tarucha

Abstract: We study ground states and excited states in semiconductor quantum dots containing 1 to 12 electrons. For the first time, it is possible to identify the quantum numbers of the states in the excitation spectra and make a direct comparison to exact calculations. A magnetic field induces transitions between excited states and ground state. These transitions are discussed in terms of crossings betwe… ▽ More We study ground states and excited states in semiconductor quantum dots containing 1 to 12 electrons. For the first time, it is possible to identify the quantum numbers of the states in the excitation spectra and make a direct comparison to exact calculations. A magnetic field induces transitions between excited states and ground state. These transitions are discussed in terms of crossings between single-particle states, singlet-triplet transitions, spin polarization, and Hund's rule. Our impurity-free quantum dots allow for atomic physics experiments in magnetic field regimes not accessible for atoms. △ Less

Submitted 29 August, 1997; originally announced August 1997.

Comments: 21 pages, PDF. See also http://vortex.tn.tudelft.nl/mensen/leok/papers/