Showing 1–50 of 191 results for author: Ong, P

Superionic surface Li-ion transport in carbonaceous materials

Authors: Jianbin Zhou, Shen Wang, Chaoshan Wu, Ji Qi, Hongli Wan, Shen Lai, Shijie Feng, Tsz Wai Ko, Zhaohui Liang, Ke Zhou, Nimrod Harpak, Nick Solan, Mengchen Liu, Zeyu Hui, Paulina J. Ai, Kent Griffith, Chunsheng Wang, Shyue ** Ong, Yan Yao, ** Liu

Abstract: Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic condu… ▽ More Unlike Li-ion transport in the bulk of carbonaceous materials, little is known about Li-ion diffusion on their surface. In this study, we have discovered an ultra-fast Li-ion transport phenomenon on the surface of carbonaceous materials, particularly when they have limited Li insertion capacity along with a high surface area. This is exemplified by a carbon black, Ketjen Black (KB). An ionic conductivity of 18.1 mS cm-1 at room temperature is observed, far exceeding most solid-state ion conductors. Theoretical calculations reveal a low diffusion barrier for the surface Li species. The species is also identified as Li*, which features a partial positive charge. As a result, lithiated KB functions effectively as an interlayer between Li and solid-state electrolytes (SSE) to mitigate dendrite growth and cell shorting. This function is found to be electrolyte agnostic, effective for both sulfide and halide SSEs. Further, lithiated KB can act as a high-performance mixed ion/electron conductor that is thermodynamically stable at potentials near Li metal. A graphite anode mixed with KB instead of a solid electrolyte demonstrates full utilization with a capacity retention of ~85% over 300 cycles. The discovery of this surface-mediated ultra-fast Li-ion transport mechanism provides new directions for the design of solid-state ion conductors and solid-state batteries. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 21 pages, 6 figures

Sign-Alternating Thermoelectric Quantum Oscillations and Insulating Landau Levels in Monolayer WTe2

Authors: Yue Tang, Tiancheng Song, Haosen Guan, Yanyu Jia, Guo Yu, Zhaoyi Joy Zheng, Ayelet J. Uzan, Michael Onyszczak, Ratnadwip Singha, Xin Gui, Kenji Watanabe, Takashi Taniguchi, Robert J. Cava, Leslie M. Schoop, N. P. Ong, Sanfeng Wu

Abstract: The detection of Landau-level-like energy structures near the chemical potential of an insulator is essential to the search for a class of correlated electronic matter hosting charge-neutral fermions and Fermi surfaces, a long-proposed concept that remains elusive experimentally. Here we introduce and demonstrate that the magneto-thermoelectric response of a quantum insulator can reveal critical i… ▽ More The detection of Landau-level-like energy structures near the chemical potential of an insulator is essential to the search for a class of correlated electronic matter hosting charge-neutral fermions and Fermi surfaces, a long-proposed concept that remains elusive experimentally. Here we introduce and demonstrate that the magneto-thermoelectric response of a quantum insulator can reveal critical information not available via other approaches. We report large quantum oscillations (QOs) in the Seebeck response of the hole-doped insulating state of monolayer tungsten ditelluride (WTe2) in magnetic fields. The QOs remarkably undergo sign-changes as the field is swept, mimicking those in metals with Landau quantization. The sign-change in the thermoelectric response directly implies the presence of a field-induced Landau-level-like structure at the chemical potential of the insulator. Our results reinforce WTe2 as a platform for investigating insulating Landau levels and mobile neutral fermions in two-dimensional insulators. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 19 pages, 9 figures

Atomic-scale tunable phonon transport at tailored grain boundaries

Authors: Xiaowang Wang, Chaitanya A. Gadre, Runqing Yang, Wanjuan Zou, Xing Bin, Christopher Addiego, Toshihiro Aoki, Yujie Quan, Wei-Tao Peng, Yifeng Huang, Chaojie Du, Mingjie Xu, Xingxu Yan, Ruqian Wu, Shyue ** Ong, Bolin Liao, Penghui Cao, Xiaoqing Pan

Abstract: Manipulating thermal properties in materials has been of fundamental importance for advancing innovative technologies. Heat carriers such as phonons are impeded by breaking crystal symmetry or periodicity. Notable methods of impeding the phonon propagation include varying the density of defects, interfaces, and nanostructures, as well as changing composition. However, a robust link between the ind… ▽ More Manipulating thermal properties in materials has been of fundamental importance for advancing innovative technologies. Heat carriers such as phonons are impeded by breaking crystal symmetry or periodicity. Notable methods of impeding the phonon propagation include varying the density of defects, interfaces, and nanostructures, as well as changing composition. However, a robust link between the individual nanoscale defect structures, phonon states, and macroscopic thermal conductivity is lacking. Here we reveal from nanoscale structure-phonon mechanisms on how the grain boundary (GB) tilt and twist angles fundamentally drive the changes in atom rearrangements, exotic vibrational states, and finally macroscopic heat transport at different bicrystal strontium titanate GBs using emerging atomic resolution vibrational spectroscopy. The 10 deg and 22 deg tilt GBs exhibit reduced phonon populations by 54% and 16% compared to the bulk value, respectively, consistent with measured thermal conductivities. A tiny twist angle further introduces a fine and local tunning of thermal conductivity by introducing twist induced defects periodically embedded with the tilt induced GB defects. Our results demonstrate that varying the tilt angle coarsely modifies the phonon population along entire GB while varying the twist angle incurs a finer adjustment at periodic locations on the GB. Our study offers a systematic approach to understanding and manipulating cross GB thermal transport of arbitrary GBs predictably and precisely. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

Authors: Matthew L. Evans, Johan Bergsma, Andrius Merkys, Casper W. Andersen, Oskar B. Andersson, Daniel Beltrán, Evgeny Blokhin, Tara M. Boland, Rubén Castañeda Balderas, Kamal Choudhary, Alberto Díaz Díaz, Rodrigo Domínguez García, Hagen Eckert, Kristjan Eimre, María Elena Fuentes Montero, Adam M. Krajewski, Jens Jørgen Mortensen, José Manuel Nápoles Duarte, Jacob Pietryga, Ji Qi, Felipe de Jesús Trejo Carrillo, Antanas Vaitkus, Jusong Yu, Adam Zettel, Pedro Baptista de Castro , et al. (34 additional authors not shown)

Abstract: The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea… ▽ More The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development. △ Less

Submitted 5 April, 2024; v1 submitted 1 February, 2024; originally announced February 2024.

Robust Machine Learning Inference from X-ray Absorption Near Edge Spectra through Featurization

Authors: Yiming Chen, Chi Chen, Inhui Hwang, Michael J. Davis, Wanli Yang, Chengjun Sun, Shyue ** Ong, Maria K. Y. Chan

Abstract: X-ray absorption spectroscopy (XAS) is a commonly-employed technique for characterizing functional materials. In particular, x-ray absorption near edge spectra (XANES) encodes local coordination and electronic information and machine learning approaches to extract this information is of significant interest. To date, most ML approaches for XANES have primarily focused on using the raw spectral int… ▽ More X-ray absorption spectroscopy (XAS) is a commonly-employed technique for characterizing functional materials. In particular, x-ray absorption near edge spectra (XANES) encodes local coordination and electronic information and machine learning approaches to extract this information is of significant interest. To date, most ML approaches for XANES have primarily focused on using the raw spectral intensities as input, overlooking the potential benefits of incorporating spectral transformations and dimensionality reduction techniques into ML predictions. In this work, we focused on systematically comparing the impact of different featurization methods on the performance of ML models for XAS analysis. We evaluated the classification and regression capabilities of these models on computed datasets and validated their performance on previously unseen experimental datasets. Our analysis revealed an intriguing discovery: the cumulative distribution function (CDF) feature achieves both high prediction accuracy and exceptional transferability. This remarkably robust performance can be attributed to its tolerance to horizontal shifts in spectra, which is crucial when validating models using experimental data. While this work exclusively focuses on XANES analysis, we anticipate that the methodology presented here will hold promise as a versatile asset to the broader spectroscopy community. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Characterizing Smooth Safety Filters via the Implicit Function Theorem

Authors: Max H. Cohen, Pio Ong, Gilbert Bahati, Aaron D. Ames

Abstract: Optimization-based safety filters, such as control barrier function (CBF) based quadratic programs (QPs), have demonstrated success in controlling autonomous systems to achieve complex goals. These CBF-QPs can be shown to be continuous, but are generally not smooth, let alone continuously differentiable. In this paper, we present a general characterization of smooth safety filters -- smooth contro… ▽ More Optimization-based safety filters, such as control barrier function (CBF) based quadratic programs (QPs), have demonstrated success in controlling autonomous systems to achieve complex goals. These CBF-QPs can be shown to be continuous, but are generally not smooth, let alone continuously differentiable. In this paper, we present a general characterization of smooth safety filters -- smooth controllers that guarantee safety in a minimally invasive fashion -- based on the Implicit Function Theorem. This characterization leads to families of smooth universal formulas for safety-critical controllers that quantify the conservatism of the resulting safety filter, the utility of which is demonstrated through illustrative examples. △ Less

Submitted 22 September, 2023; originally announced September 2023.

The vortex-Nernst effect in a superconducting infinite-layer nickelate

Authors: Nicholas P. Quirk, Danfeng Li, Bai Yang Wang, Harold Y. Hwang, N. P. Ong

Abstract: We report measurements of the Nernst and Seebeck effects in Nd$_{1-x}$Sr$_x$NiO$_2$ thin films near the superconducting transition temperature, $T$ = 6.5 - 15 K. Our main result is the observation of a vortex-Nernst signal $S_{yx}(T,H)$ with a maximum at $μ_0H$ = 5 T and a tail that extends to $μ_0H$ $\approx$ 15 T, which we identify as the upper-critical field $H_{c2}$. At $T > T_{\rm c} =$ 6.1 K… ▽ More We report measurements of the Nernst and Seebeck effects in Nd$_{1-x}$Sr$_x$NiO$_2$ thin films near the superconducting transition temperature, $T$ = 6.5 - 15 K. Our main result is the observation of a vortex-Nernst signal $S_{yx}(T,H)$ with a maximum at $μ_0H$ = 5 T and a tail that extends to $μ_0H$ $\approx$ 15 T, which we identify as the upper-critical field $H_{c2}$. At $T > T_{\rm c} =$ 6.1 K, $H_{c2}$ remains large (15 T), up to the highest temperature we can resolve from $S_{yx}$ (11 K). These results indicate the existence of a vortex-liquid state over a wide range of finite-resistance temperatures, as in the high-$T_{\rm c}$ cuprates. △ Less

Submitted 6 September, 2023; originally announced September 2023.

Comments: 10 pages, 6 figures

Robust Training of Machine Learning Interatomic Potentials with Dimensionality Reduction and Stratified Sampling

Authors: Ji Qi, Tsz Wai Ko, Brandon C. Wood, Tuan Anh Pham, Shyue ** Ong

Abstract: Machine learning interatomic potentials (MLIPs) enable the accurate simulation of materials at larger sizes and time scales, and play increasingly important roles in the computational understanding and design of materials. However, MLIPs are only as accurate and robust as the data they are trained on. In this work, we present DImensionality-Reduced Encoded Clusters with sTratified (DIRECT) samplin… ▽ More Machine learning interatomic potentials (MLIPs) enable the accurate simulation of materials at larger sizes and time scales, and play increasingly important roles in the computational understanding and design of materials. However, MLIPs are only as accurate and robust as the data they are trained on. In this work, we present DImensionality-Reduced Encoded Clusters with sTratified (DIRECT) sampling as an approach to select a robust training set of structures from a large and complex configuration space. By applying DIRECT sampling on the Materials Project relaxation trajectories dataset with over one million structures and 89 elements, we develop an improved materials 3-body graph network (M3GNet) universal potential that extrapolate more reliably to unseen structures. We further show that molecular dynamics (MD) simulations with universal potentials such as M3GNet can be used in place of expensive \textit{ab initio} MD to rapidly create a large configuration space for target materials systems. Combined with DIRECT sampling, we develop a highly reliable moment tensor potential for Ti-H system without the need for iterative optimization. This work paves the way towards robust high throughput development of MLIPs across any compositional complexity. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Develo** high-impedance superconducting resonators and on-chip filters for semiconductor quantum dot circuit quantum electrodynamics

Authors: X. Zhang, Z. Zhu, N. P. Ong, J. R. Petta

Abstract: Spin-photon coupling presents an enticing opportunity for the long-range coupling of spin qubits. The spin-photon coupling rate $g_{s}$ is proportional to the charge-photon coupling rate $g_{c}$. To move deeper into the strong coupling regime, $g_{c}$ can be enhanced by fabricating high-impedance cavities using high kinetic inductance films. Here we report dc transport and microwave response inves… ▽ More Spin-photon coupling presents an enticing opportunity for the long-range coupling of spin qubits. The spin-photon coupling rate $g_{s}$ is proportional to the charge-photon coupling rate $g_{c}$. To move deeper into the strong coupling regime, $g_{c}$ can be enhanced by fabricating high-impedance cavities using high kinetic inductance films. Here we report dc transport and microwave response investigations of niobium nitride (NbN) films of different thicknesses. The kinetic inductance increases rapidly as the film thickness is reduced below 50 nm and for 15 nm NbN films we measure a sheet kinetic inductance $L_{k,S}$ = 41.2 pH/$\Box$. As an application of the high kinetic inductance films, we fabricate compact LC filters that are commonly used to reduce microwave leakage in circuit quantum electrodynamics (cQED) devices. These filters feature up to 60 dB of attenuation near typical cavity resonance frequencies $f_c$ = 8 GHz. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Journal ref: Phys. Rev. Applied 21, 014019 (2024)

Machine Learning Moment Tensor Potential for Modelling Dislocation and Fracture in L1$_0$-TiAl and D0$_{19}$-Ti$_3$Al Alloys

Authors: Ji Qi, Z. H. Aitken, Qingxiang Pei, Anne Marie Z. Tan, Yunxing Zuo, M. H. Jhon, S. S. Quek, T. Wen, Zhaoxuan Wu, Shyue ** Ong

Abstract: Dual-phase $γ$-TiAl and $α_2$-Ti$_{3}$Al alloys exhibit high strength and creep resistance at high temperatures. However, they suffer from low tensile ductility and fracture toughness at room temperature. Experimental studies show unusual plastic behaviour associated with ordinary and superdislocations, making it necessary to gain a detailed understanding on their core properties in individual pha… ▽ More Dual-phase $γ$-TiAl and $α_2$-Ti$_{3}$Al alloys exhibit high strength and creep resistance at high temperatures. However, they suffer from low tensile ductility and fracture toughness at room temperature. Experimental studies show unusual plastic behaviour associated with ordinary and superdislocations, making it necessary to gain a detailed understanding on their core properties in individual phases and at the two-phase interfaces. Unfortunately, extended superdislocation cores are widely dissociated beyond the length scales practical for routine first-principles density-functional theory (DFT) calculations, while extant interatomic potentials are not quantitatively accurate to reveal mechanistic origins of the unusual core-related behaviour in either phases. Here, we develop a highly-accurate moment tensor potential (MTP) for the binary Ti-Al alloy system using a DFT dataset covering a broad range of intermetallic and solid solution structures. The optimized MTP is rigorously benchmarked against both previous and new DFT calculations, and unlike existing potentials, is shown to possess outstanding accuracy in nearly all tested mechanical properties, including lattice parameters, elastic constants, surface energies, and generalized stacking fault energies (GSFE) in both phases. The utility of the MTP is further demonstrated by producing dislocation core structures largely consistent with expectations from DFT-GSFE and experimental observations. The new MTP opens the path to realistic modelling and simulations of bulk lattice and defect properties relevant to the plastic deformation and fracture processes in $γ$-TiAl and $α_2$-Ti$_{3}$Al dual-phase alloys. △ Less

Submitted 22 May, 2023; v1 submitted 19 May, 2023; originally announced May 2023.

Sample-and-Hold Safety with Control Barrier Functions

Authors: Gilbert Bahati, Pio Ong, Aaron D. Ames

Abstract: A common assumption on the deployment of safeguarding controllers on the digital platform is that high sampling frequency translates to a small violation of safety. This paper investigates and formalizes this assumption through the lens of Input-to-State Safety. From this perspective, and leveraging control barrier functions (CBFs), we propose an alternative solution for maintaining safety of samp… ▽ More A common assumption on the deployment of safeguarding controllers on the digital platform is that high sampling frequency translates to a small violation of safety. This paper investigates and formalizes this assumption through the lens of Input-to-State Safety. From this perspective, and leveraging control barrier functions (CBFs), we propose an alternative solution for maintaining safety of sample-and-hold controlled systems without any violation to the original safe set. Our approach centers around modulating the sampled control input in order to guarantee a more robust safety condition. We analyze both the time-triggered and the event-triggered sample-and-hold implementations, including the characterization of sampling frequency requirements and trigger conditions. We demonstrate the effectiveness of our approach in the context of adaptive cruise control through simulations. △ Less

Submitted 2 October, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Comments: Submitted to IEEE American Control Conference 2024

Intermittent Safety Filters for Event-Triggered Safety Maneuvers with Application to Satellite Orbit Transfers

Authors: Pio Ong, Aaron D. Ames

Abstract: In balancing safety with the nominal control objectives, e.g., stabilization, it is desirable to reduce the time period when safety filters are in effect. Inspired by traditional spacecraft maneuvers, and with the ultimate goal of reducing the duration when safety is of concern, this paper proposes an event-triggered control framework with switching state-based triggers. Our first trigger in the s… ▽ More In balancing safety with the nominal control objectives, e.g., stabilization, it is desirable to reduce the time period when safety filters are in effect. Inspired by traditional spacecraft maneuvers, and with the ultimate goal of reducing the duration when safety is of concern, this paper proposes an event-triggered control framework with switching state-based triggers. Our first trigger in the scheme monitors safety constraints encoded by barrier functions, and thereby ensures safety without the need to alter the nominal controller--and when the boundary of the safety constraint is approached, the controller drives the system to the region where control actions are not needed. The second trigger condition determines if the safety constraint has improved enough for the success of the first trigger. We begin by motivating this framework for impulsive control systems, e.g., a satellite orbiting an asteroid. We then expand the approach to more general nonlinear system through the use of safety filtered controllers. Simulation results demonstrating satellite orbital maneuvers illustrate the utility of the proposed event-triggered framework. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Comments: 8 pages, submitted to IEEE Conference on Decision and Control, 2023

Unconventional Superconducting Quantum Criticality in Monolayer WTe2

Authors: Tiancheng Song, Yanyu Jia, Guo Yu, Yue Tang, Pengjie Wang, Ratnadwip Singha, Xin Gui, Ayelet J. Uzan, Michael Onyszczak, Kenji Watanabe, Takashi Taniguchi, Robert J. Cava, Leslie M. Schoop, N. P. Ong, Sanfeng Wu

Abstract: The superconductor to insulator or metal transition in two dimensions (2D) provides a valuable platform for studying continuous quantum phase transitions (QPTs) and critical phenomena. Distinct theoretical models, including both fermionic and bosonic localization scenarios, have been developed, but many questions remain unsettled despite decades of research. Extending Nernst experiments down to mi… ▽ More The superconductor to insulator or metal transition in two dimensions (2D) provides a valuable platform for studying continuous quantum phase transitions (QPTs) and critical phenomena. Distinct theoretical models, including both fermionic and bosonic localization scenarios, have been developed, but many questions remain unsettled despite decades of research. Extending Nernst experiments down to millikelvin temperatures, we uncover anomalous quantum fluctuations and identify an unconventional superconducting quantum critical point (QCP) in a gate-tuned excitonic quantum spin Hall insulator (QSHI), the monolayer tungsten ditelluride (WTe2). The observed vortex Nernst effect reveals singular superconducting fluctuations in the resistive normal state induced by magnetic fields or temperature, even well above the transition. Near the do**-induced QCP, the Nernst signal driven by quantum fluctuations is exceptionally large in the millikelvin regime, with a coefficient of ~ 4,100 uV/KT at zero magnetic field, an indication of the proliferation of vortices. Surprisingly, the Nernst signal abruptly disappears when the do** falls below the critical value, in striking conflict with conventional expectations. This series of phenomena, which have no prior analogue, call for careful examinations of the mechanism of the QCP, including the possibility of a continuous QPT between two distinct ordered phases in the monolayer. Our experiments open a new avenue for studying unconventional QPTs and quantum critical matter. △ Less

Submitted 1 June, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Deep Offline Reinforcement Learning for Real-world Treatment Optimization Applications

Authors: Milashini Nambiar, Supriyo Ghosh, Priscilla Ong, Yu En Chan, Yong Mong Bee, Pavitra Krishnaswamy

Abstract: There is increasing interest in data-driven approaches for recommending optimal treatment strategies in many chronic disease management and critical care applications. Reinforcement learning methods are well-suited to this sequential decision-making problem, but must be trained and evaluated exclusively on retrospective medical record datasets as direct online exploration is unsafe and infeasible.… ▽ More There is increasing interest in data-driven approaches for recommending optimal treatment strategies in many chronic disease management and critical care applications. Reinforcement learning methods are well-suited to this sequential decision-making problem, but must be trained and evaluated exclusively on retrospective medical record datasets as direct online exploration is unsafe and infeasible. Despite this requirement, the vast majority of treatment optimization studies use off-policy RL methods (e.g., Double Deep Q Networks (DDQN) or its variants) that are known to perform poorly in purely offline settings. Recent advances in offline RL, such as Conservative Q-Learning (CQL), offer a suitable alternative. But there remain challenges in adapting these approaches to real-world applications where suboptimal examples dominate the retrospective dataset and strict safety constraints need to be satisfied. In this work, we introduce a practical and theoretically grounded transition sampling approach to address action imbalance during offline RL training. We perform extensive experiments on two real-world tasks for diabetes and sepsis treatment optimization to compare performance of the proposed approach against prominent off-policy and offline RL baselines (DDQN and CQL). Across a range of principled and clinically relevant metrics, we show that our proposed approach enables substantial improvements in expected health outcomes and in accordance with relevant practice and safety guidelines. △ Less

Submitted 13 June, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Compositionally Complex Perovskite Oxides as a New Class of Li-Ion Solid Electrolytes

Authors: Shu-Ting Ko, Tom Lee, Ji Qi, Dawei Zhang, Wei-Tao Peng, Xin Wang, Wei-Che Tsai, Shikai Sun, Zhaokun Wang, William J. Bowman, Shyue ** Ong, Xiaoqing Pan, Jian Luo

Abstract: Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Usin… ▽ More Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Using oxide solid electrolytes for all-solid-state batteries as an exemplar, we validate these new strategies via discovering a new class of compositionally complex perovskite oxides (CCPOs) to show the possibility of improving ionic conductivities beyond the limit of conventional do**. As an example (amongst the 28 CCPOs examined), we demonstrate that the ionic conductivity can be improved by >60% in (Li0.375Sr0.4375)(Ta0.375Nb0.375Zr0.125Hf0.125)O3-δ, in comparison with the state-of-art (Li0.375Sr0.4375)(Ta0.75Zr0.25)O3-δ (LSTZ) baseline, via maintaining comparable electrochemical stability. Furthermore, the ionic conductivity can be improved by another >70% via grain boundary (GB) engineering, achieving >270% of the LSTZ baseline. This work suggests transformative new strategies for designing and tailoring HECs and CCCs, thereby opening a new window for discovering materials for energy storage and many other applications. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Anisotropic resistance with a 90-degree twist in a ferromagnetic Weyl semimetal, Co2MnGa

Authors: Nicholas P. Quirk, Guangming Cheng, Kaustuv Manna, Claudia Felser, Nan Yao, N. P. Ong

Abstract: Co$_2$MnGa is a ferromagnetic semimetal with Weyl nodal lines identified by ARPES. We studied electrical transport in thin Co$_2$MnGa lamellae (10 $\times$ 10 $\times$ 0.4-5 microns) cut from single-crystals using a focused ion beam. These crystals exhibit an unexpected and highly unusual planar resistance anisotropy ($\sim$10 times) with principal axes that rotate by 90 degrees between the upper… ▽ More Co$_2$MnGa is a ferromagnetic semimetal with Weyl nodal lines identified by ARPES. We studied electrical transport in thin Co$_2$MnGa lamellae (10 $\times$ 10 $\times$ 0.4-5 microns) cut from single-crystals using a focused ion beam. These crystals exhibit an unexpected and highly unusual planar resistance anisotropy ($\sim$10 times) with principal axes that rotate by 90 degrees between the upper and lower faces. Using symmetry arguments and simulations, we find that the observed resistance anisotropy resembles that of an isotropic conductor with anisotropic surface states that are impeded from hybridization with bulk states. The origin of these states awaits further experiments that can correlate the surface bands with the observed 90$^\circ$-twist geometry. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: 10 pages, 5 figures

The Intercalation Chemistry of the Disordered RockSalt Li3V2O5 Anode from Cluster Expansions and Machine Learning Interatomic Potentials

Authors: Xingyu Guo, Chi Chen, Shyue ** Ong

Abstract: Disordered rocksalt (DRX) Li3V2O5 is a promising candidate for anode in rechargeable lithium-ion batteries because of its ideal low voltage, high rate capability, and superior cycling stability. Herein, we presents a comprehensive study of intercalation chemistry of the DRX-Li3V2O5 anode using density functional theory calculations combined with machine learning cluster expansions and interatomic… ▽ More Disordered rocksalt (DRX) Li3V2O5 is a promising candidate for anode in rechargeable lithium-ion batteries because of its ideal low voltage, high rate capability, and superior cycling stability. Herein, we presents a comprehensive study of intercalation chemistry of the DRX-Li3V2O5 anode using density functional theory calculations combined with machine learning cluster expansions and interatomic potentials. The predicted voltage profile of the disordered Li3V2O5 anode at room temperature based on Monte Carlo simulations with a fitted cluster expansion model is in excellent agreement with experiments. In contrast to previous DFT results, we find that Li ions predominately intercalate into tetrahedral sites during charging, while the majority of Li and V ions at octahedral sites remain stable. In addition, MD simulations with a fitted moment tensor potential attribute the fast-charging capability of DRX-Li3V2O5 to the facile diffusivity of Li+ via tetrahedral - octahedral - tetrahedral pathway. We further suggest tuning the Li:V ratio as a means to trade off increased lithiation capacity and decreased anode voltage in this system. This work provides in-depth insights into the high-performance DRX-Li3V2O5 anode, and paves the way to the discovery of other disordered anode materials. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Synthetic control of structure and conduction properties in Na-Y-Zr-Cl solid electrolytes

Authors: Elias Sebti, Ji Qi, Peter M. Richardson, Phillip Ridley, Erik A. Wu, Swastika Banerjee, Raynald Giovine, Ashley Cronk, So-Yeon Ham, Ying Shirley Meng, Shyue ** Ong, Raphaële J. Clément

Abstract: In the development of low cost, sustainable, and energy-dense batteries, chloride-based compounds are promising catholyte materials for solid-state batteries owing to their high Na-ion conductivities and oxidative stabilities. The ability to further improve Na-ion conduction, however, requires an understanding of the impact of long-range and local structural features on transport in these systems.… ▽ More In the development of low cost, sustainable, and energy-dense batteries, chloride-based compounds are promising catholyte materials for solid-state batteries owing to their high Na-ion conductivities and oxidative stabilities. The ability to further improve Na-ion conduction, however, requires an understanding of the impact of long-range and local structural features on transport in these systems. In this study, we leverage different synthesis methods to control polymorphism and cation disorder in Na-Y-Zr-Cl solid electrolytes and interrogate the impact on Na-ion conduction. We demonstrate the existence of a more conductive P2$_1$/n polymorph of Na$_2$ZrCl$_6$ formed upon ball milling. In Na$_3$YCl$_6$, the R$\bar{3}$ polymorph is shown to be more conductive than its P2$_1$/n counterpart owing to the presence of intrinsic vacancies and disorder on the Y sublattice. Transition metal ordering in the Na$_{2.25}$Y$_{0.25}$Zr$_{0.75}$Cl$_6$ composition strongly impacts Na-ion transport, where a greater mixing of Y$^{3+}$ and Zr$^{4+}$ on the transition metal sublattice facilitates ion migration through partial activation of Cl rotations at relevant temperatures. Overall, Na-ion transport sensitively depends on the phases and transition metal distributions stabilized during synthesis. These results are likely generalizable to other halide compositions and indicate that achieving control over the synthetic protocol and resultant structure is key in the pursuit of improved catholytes for high voltage solid-state sodium-ion batteries. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Colossal negative magnetoresistance in the complex charge density wave regime of an antiferromagnetic Dirac semimetal

Authors: Ratnadwip Singha, Kirstine J. Dalgaard, Dmitry Marchenko, Maxim Krivenkov, Emile D. L. Rienks, Milena Jovanovic, Samuel M. L. Teicher, Jiayi Hu, Tyger H. Salters, **g**g Lin, Andrei Varykhalov, N. Phuan Ong, Leslie M. Schoop

Abstract: Colossal magnetoresistance (MR) is a well-known phenomenon, notably observed in hole-doped ferromagnetic manganites. It remains a major research topic due to its potential in technological applications. Though topological semimetals also show large MR, its origin and nature are completely different. Here, we show that in the highly electron doped region, the Dirac semimetal CeSbTe demonstrates sim… ▽ More Colossal magnetoresistance (MR) is a well-known phenomenon, notably observed in hole-doped ferromagnetic manganites. It remains a major research topic due to its potential in technological applications. Though topological semimetals also show large MR, its origin and nature are completely different. Here, we show that in the highly electron doped region, the Dirac semimetal CeSbTe demonstrates similar properties as the manganites. CeSb$_{0.11}$Te$_{1.90}$ hosts multiple charge density wave (CDW) modulation-vectors and has a complex magnetic phase diagram. We confirm that this compound is an antiferromagnetic Dirac semimetal. Despite having a metallic Fermi surface, the electronic transport properties are semiconductor-like and deviate from known theoretical models. An external magnetic field induces a semiconductor-metal-like transition, which results in a colossal negative MR. Moreover, signatures of the coupling between the CDW and a spin modulation are observed in resistivity. This spin modulation also produces a giant anomalous Hall response. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 11 pages, 13 figures

Journal ref: Science Advances 9, eadh0145 (2023)

Eavesdrop** on competing condensates by the edge supercurrent in a Weyl superconductor

Authors: Stephan Kim, Shiming Lei, Leslie M. Schoop, R. J. Cava, N. P. Ong

Abstract: In a topological insulator the metallic surface states are easily distinguished from the insulating bulk states (FuKane07). By contrast, in a topological superconductor (FuKane08,Qi,FuBerg,Oppen), much less is known about the relationship between an edge supercurrent and the bulk pair condensate. Can we force their pairing symmetries to be incompatible? In the superconducting state of the Weyl sem… ▽ More In a topological insulator the metallic surface states are easily distinguished from the insulating bulk states (FuKane07). By contrast, in a topological superconductor (FuKane08,Qi,FuBerg,Oppen), much less is known about the relationship between an edge supercurrent and the bulk pair condensate. Can we force their pairing symmetries to be incompatible? In the superconducting state of the Weyl semimetal MoTe$_2$, an edge supercurrent is observed as oscillations in the current-voltage (\emph{I-V}) curves induced by fluxoid quantization (Wang). We have found that the $s$-wave pairing potential of supercurrent injected from niobium contacts is incompatible with the intrinsic pair condensate in MoTe$_2$. The incompatibility leads to strong stochasticity in the switching current $I_c$ as well as other anomalous properties such as an unusual antihysteretic behavior of the ``wrong'' sign. Under supercurrent injection, the fluxoid-induced edge oscillations survive to much higher magnetic fields \emph{H}. Interestingly, the oscillations are either very noisy or noise-free depending on the pair potential that ends up dictating the edge pairing. Using the phase noise as a sensitive probe that eavesdrops on the competiting bulk states, we uncover an underlying blockade mechanism whereby the intrinsic condensate can pre-emptively block proximitization by the Nb pair potential depending on the history. △ Less

Submitted 6 June, 2023; v1 submitted 1 August, 2022; originally announced August 2022.

Comments: 11 pages, 6 figures

Stability and Safety through Event-Triggered Intermittent Control with Application to Spacecraft Orbit Stabilization

Authors: Pio Ong, Gilbert Bahati, Aaron D. Ames

Abstract: In systems where the ability to actuate is a scarce resource, e.g., spacecrafts, it is desirable to only apply a given controller in an intermittent manner--with periods where the controller is on and periods where it is off. Motivated by the event-triggered control paradigm, where state-dependent triggers are utilized in a sample-and-hold context, we generalize this concept to include state trigg… ▽ More In systems where the ability to actuate is a scarce resource, e.g., spacecrafts, it is desirable to only apply a given controller in an intermittent manner--with periods where the controller is on and periods where it is off. Motivated by the event-triggered control paradigm, where state-dependent triggers are utilized in a sample-and-hold context, we generalize this concept to include state triggers where the controller is off thereby creating a framework for intermittent control. Our approach utilizes certificates--either Lyapunov or barrier functions--to design intermittent trigger laws that guarantee stability or safety; the controller is turned on for the period for which is beneficial with regard to the certificate, and turned off until a performance threshold is reached. The main result of this paper is that the intermittent controller scheme guarantees (set) stability when Lyapunov functions are utilized, and safety (forward set invariance) in the setting of barrier functions. As a result, our trigger designs can leverage the intermittent nature of the actuator, and at the same time, achieve the task of stabilization or safety. We further demonstrate the application and benefits of intermittent control in the context of the spacecraft orbit stabilization problem. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: 8 pages, 3 figures, submitted to IEEE Conference on Decision and Control 2022

Quantum materials for energy-efficient neuromorphic computing

Authors: Axel Hoffmann, Shriram Ramanathan, Julie Grollier, Andrew D. Kent, Marcelo Rozenberg, Ivan K. Schuller, Oleg Shpyrko, Robert Dynes, Yeshaiahu Fainman, Alex Frano, Eric E. Fullerton, Giulia Galli, Vitaliy Lomakin, Shyue ** Ong, Amanda K. Petford-Long, Jonathan A. Schuller, Mark D. Stiles, Yayoi Takamura, Yimei Zhu

Abstract: Neuromorphic computing approaches become increasingly important as we address future needs for efficiently processing massive amounts of data. The unique attributes of quantum materials can help address these needs by enabling new energy-efficient device concepts that implement neuromorphic ideas at the hardware level. In particular, strong correlations give rise to highly non-linear responses, su… ▽ More Neuromorphic computing approaches become increasingly important as we address future needs for efficiently processing massive amounts of data. The unique attributes of quantum materials can help address these needs by enabling new energy-efficient device concepts that implement neuromorphic ideas at the hardware level. In particular, strong correlations give rise to highly non-linear responses, such as conductive phase transitions that can be harnessed for short and long-term plasticity. Similarly, magnetization dynamics are strongly non-linear and can be utilized for data classification. This paper discusses select examples of these approaches, and provides a perspective for the current opportunities and challenges for assembling quantum-material-based devices for neuromorphic functionalities into larger emergent complex network systems. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Journal ref: APL Materials 10, 070904 (2022)

Safe Backstep** with Control Barrier Functions

Authors: Andrew J. Taylor, Pio Ong, Tamas G. Molnar, Aaron D. Ames

Abstract: Complex control systems are often described in a layered fashion, represented as higher-order systems where the inputs appear after a chain of integrators. While Control Barrier Functions (CBFs) have proven to be powerful tools for safety-critical controller design of nonlinear systems, their application to higher-order systems adds complexity to the controller synthesis process -- it necessitates… ▽ More Complex control systems are often described in a layered fashion, represented as higher-order systems where the inputs appear after a chain of integrators. While Control Barrier Functions (CBFs) have proven to be powerful tools for safety-critical controller design of nonlinear systems, their application to higher-order systems adds complexity to the controller synthesis process -- it necessitates dynamically extending the CBF to include higher order terms, which consequently modifies the safe set in complex ways. We propose an alternative approach for addressing safety of higher-order systems through Control Barrier Function Backstep**. Drawing inspiration from the method of Lyapunov backstep**, we provide a constructive framework for synthesizing safety-critical controllers and CBFs for higher-order systems from a top-level dynamics safety specification and controller design. Furthermore, we integrate the proposed method with Lyapunov backstep**, allowing the tasks of stability and safety to be expressed individually but achieved jointly. We demonstrate the efficacy of this approach in simulation. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: 8 pages, 2 figures, submitted to Conference on Decision & Control (CDC) 2022

Atomic-scale origin of the low grain-boundary resistance in perovskite solid electrolytes

Authors: Tom Lee, Ji Qi, Chaitanya A. Gadre, Huaixun Huyan, Shu-Ting Ko, Yunxing Zuo, Chaojie Du, Jie Li, Toshihiro Aoki, Caden John Stippich, Ruqian Wu, Jian Luo, Shyue ** Ong, Xiaoqing Pan

Abstract: Oxide solid electrolytes (OSEs) have the potential to achieve improved safety and energy density for lithium-ion batteries, but their high grain-boundary (GB) resistance is a general bottleneck. In the most well studied perovskite OSE, Li3xLa2/3-xTiO3 (LLTO), the ionic conductivity of GBs is about three orders of magnitude lower than that of the bulk. In contrast, the related Li0.375Sr0.4375Ta0.75… ▽ More Oxide solid electrolytes (OSEs) have the potential to achieve improved safety and energy density for lithium-ion batteries, but their high grain-boundary (GB) resistance is a general bottleneck. In the most well studied perovskite OSE, Li3xLa2/3-xTiO3 (LLTO), the ionic conductivity of GBs is about three orders of magnitude lower than that of the bulk. In contrast, the related Li0.375Sr0.4375Ta0.75Zr0.25O3 (LSTZ0.75) perovskite exhibits low GB resistance for reasons yet unknown. Here, we used aberration-corrected scanning transmission electron microscopy and spectroscopy, along with an active learning moment tensor potential, to reveal the atomic scale structure and composition of LSTZ0.75 GBs. Vibrational electron energy loss spectroscopy is applied for the first time to characterize the otherwise unmeasurable Li distribution in GBs of LSTZ0.75. We found that Li depletion, which is a major reason for the low GB ionic conductivity of LLTO, is absent for the GBs of LSTZ0.75. Instead, the low GB resistivity of LSTZ0.75 is attributed to the formation of a unique defective cubic perovskite interfacial structure that contained abundant vacancies. Our study provides insights into the atomic scale mechanisms of low GB resistivity and sheds light on possible paths for designing OSEs with high total ionic conductivity. △ Less

Submitted 31 March, 2022; originally announced April 2022.

A Class of Magnetic Topological Material Candidates with Hypervalent Bi Chains

Authors: Jason F. Khoury, Bingzheng Han, Milena Jovanovic, Ratnadwip Singha, Xiaoyu Song, Raquel Queiroz, N. Phuan Ong, Leslie M. Schoop

Abstract: The link between crystal and electronic structure is crucial for understanding structure-property relations in solid-state chemistry. In particular, it has been instrumental in understanding topological materials, where electrons behave differently than they would in conventional solids. Herein, we identify 1D Bi chains as a structural motif of interest for topological materials. We focus on Sm… ▽ More The link between crystal and electronic structure is crucial for understanding structure-property relations in solid-state chemistry. In particular, it has been instrumental in understanding topological materials, where electrons behave differently than they would in conventional solids. Herein, we identify 1D Bi chains as a structural motif of interest for topological materials. We focus on Sm$_3$ZrBi$_5$, a new quasi-one-dimensional (1D) compound in the Ln$_3$MPn$_5$ (Ln = lanthanide; M = metal; Pn = pnictide) family that crystallizes in the P$6_{3}$/mcm space group. Density functional theory calculations indicate a complex, topologically non-trivial electronic structure that changes significantly in the presence of spin-orbit coupling. Magnetic measurements show a quasi-1D antiferromagnetic structure with two magnetic transitions at 11.7 and 10.7 K that are invariant to applied field up to 9 T, indicating magnetically frustrated spins. Heat capacity, electrical, and thermal transport measurements support this claim and suggest complex scattering behavior in Sm$_3$ZrBi$_5$. This work highlights 1D chains as an unexplored structural motif for identifying topological materials, as well as the potential for rich physical phenomena in the Ln$_3$MPn$_5$ family. △ Less

Submitted 26 May, 2022; v1 submitted 23 March, 2022; originally announced March 2022.

Comments: 43 pages, 13 figures. Updated to add one reference and correct error in Figure 3

Multi-scale Investigation of Chemical Short-Range Order and Dislocation Glide in the MoNbTi and TaNbTi Refractory Multi-Principal Element Alloys

Authors: Hui Zheng, Lauren T. W. Fey, Xiang-Guo Li, Yong-Jie Hu, Liang Qi, Chi Chen, Shuozhi Xu, Irene J. Beyerlein, Shyue ** Ong

Abstract: Refractory multi-principal element alloys (RMPEAs) are promising materials for high-temperature structural applications. Here, we investigate the role of chemical short-range ordering (CSRO) on dislocation glide in two model RMPEAs - TaNbTi and MoNbTi - using a multi-scale modeling approach. A highly accurate machine learning interatomic potential was developed for the Mo-Ta-Nb-Ti system and used… ▽ More Refractory multi-principal element alloys (RMPEAs) are promising materials for high-temperature structural applications. Here, we investigate the role of chemical short-range ordering (CSRO) on dislocation glide in two model RMPEAs - TaNbTi and MoNbTi - using a multi-scale modeling approach. A highly accurate machine learning interatomic potential was developed for the Mo-Ta-Nb-Ti system and used to demonstrate that MoNbTi exhibits a much greater degree of SRO than TaNbTi and the local composition has a direct effect on the unstable stacking fault energies (USFE). From mesoscale phase-field dislocation dynamics simulations, we find that increasing SRO leads to higher mean USFEs, thereby increasing the stress required for dislocation glide. The gliding dislocations experience significant hardening due to pinning and depinning caused by random compositional fluctuations, with higher SRO decreasing the degree of USFE dispersion and hence, amount of hardening. Finally, we show how the morphology of an expanding dislocation loop is affected by the applied stress, with higher SRO requiring higher applied stresses to achieve smooth screw dislocation glide. △ Less

Submitted 7 March, 2022; originally announced March 2022.

A Universal Graph Deep Learning Interatomic Potential for the Periodic Table

Authors: Chi Chen, Shyue ** Ong

Abstract: Interatomic potentials (IAPs), which describe the potential energy surface of atoms, are a fundamental input for atomistic simulations. However, existing IAPs are either fitted to narrow chemistries or too inaccurate for general applications. Here, we report a universal IAP for materials based on graph neural networks with three-body interactions (M3GNet). The M3GNet IAP was trained on the massive… ▽ More Interatomic potentials (IAPs), which describe the potential energy surface of atoms, are a fundamental input for atomistic simulations. However, existing IAPs are either fitted to narrow chemistries or too inaccurate for general applications. Here, we report a universal IAP for materials based on graph neural networks with three-body interactions (M3GNet). The M3GNet IAP was trained on the massive database of structural relaxations performed by the Materials Project over the past 10 years and has broad applications in structural relaxation, dynamic simulations and property prediction of materials across diverse chemical spaces. About 1.8 million materials were identified from a screening of 31 million hypothetical crystal structures to be potentially stable against existing Materials Project crystals based on M3GNet energies. Of the top 2000 materials with the lowest energies above hull, 1578 were verified to be stable using DFT calculations. These results demonstrate a machine learning-accelerated pathway to the discovery of synthesizable materials with exceptional properties. △ Less

Submitted 14 August, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

A Universal Machine Learning Model for Elemental Grain Boundary Energies

Authors: Weike Ye, Hui Zheng, Chi Chen, Shyue ** Ong

Abstract: The grain boundary (GB) energy has a profound influence on the grain growth and properties of polycrystalline metals. Here, we show that the energy of a GB, normalized by the bulk cohesive energy, can be described purely by four geometric features. By machine learning on a large computed database of 361 small $Σ$ ($Σ< 10$) GBs of more than 50 metals, we develop a model that can predict the grain b… ▽ More The grain boundary (GB) energy has a profound influence on the grain growth and properties of polycrystalline metals. Here, we show that the energy of a GB, normalized by the bulk cohesive energy, can be described purely by four geometric features. By machine learning on a large computed database of 361 small $Σ$ ($Σ< 10$) GBs of more than 50 metals, we develop a model that can predict the grain boundary energies to within a mean absolute error of 0.13 J m$^{-2}$. More importantly, this universal GB energy model can be extrapolated to the energies of high $Σ$ GBs without loss in accuracy. These results highlight the importance of capturing fundamental scaling physics and domain knowledge in the design of interpretable, extrapolatable machine learning models for materials science. △ Less

Submitted 28 January, 2022; originally announced January 2022.

Comments: 12 pages, 4 figures

The planar thermal Hall conductivity in the Kitaev magnet α-RuCl3

Authors: Peter Czajka, Tong Gao, Max Hirschberger, Paula Lampen-Kelley, Arnab Banerjee, Nicholas Quirk, David G. Mandrus, Stephen E. Nagler, N. P. Ong

Abstract: We report detailed measurements of the Onsager-like planar thermal Hall conductivity $κ_{xy}$ in $α$-RuCl$_3$, a spin-liquid candidate of topical interest. With the thermal current ${\bf J}_{\rm Q}$ and magnetic field $\bf B\parallel a$ (zigzag axis), the observed $κ_{xy}/T$ varies strongly with temperature $T$ (1-10 K). The results are well-described by bosonic edge excitations which evolve to to… ▽ More We report detailed measurements of the Onsager-like planar thermal Hall conductivity $κ_{xy}$ in $α$-RuCl$_3$, a spin-liquid candidate of topical interest. With the thermal current ${\bf J}_{\rm Q}$ and magnetic field $\bf B\parallel a$ (zigzag axis), the observed $κ_{xy}/T$ varies strongly with temperature $T$ (1-10 K). The results are well-described by bosonic edge excitations which evolve to topological magnons at large $B$. Fits to $κ_{xy}/T$ yield a Chern number $\sim 1$ and a band energy $ω_1\sim$1 meV, in agreement with sharp modes seen in electron spin-resonance experiments. The bosonic character is incompatible with half-quantization of $κ_{xy}/T$. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Comments: 7 pages, 3 figures

Journal ref: Nature Materials 22, 36 (2023)

Nonsmooth Control Barrier Function Design of Continuous Constraints for Network Connectivity Maintenance

Authors: Pio Ong, Beatrice Capelli, Lorenzo Sabattini, Jorge Cortes

Abstract: This paper considers the problem of maintaining global connectivity of a multi-robot system while executing a desired coordination task. Our approach builds on optimization-based feedback design formulations, where the nominal cost function and constraints encode desirable control objectives for the resulting input. Our solution uses the algebraic connectivity of the multi-robot interconnection to… ▽ More This paper considers the problem of maintaining global connectivity of a multi-robot system while executing a desired coordination task. Our approach builds on optimization-based feedback design formulations, where the nominal cost function and constraints encode desirable control objectives for the resulting input. Our solution uses the algebraic connectivity of the multi-robot interconnection topology as a control barrier function and critically embraces its nonsmooth nature. We take advantage of the understanding of how Laplacian eigenvalues behave as their multiplicities change, in combination with the flexibility provided by the concept of control barrier function, to carefully design additional constraints that guarantee the resulting optimization-based controller is continuous and maintains network connectivity. The technical treatment combines elements from set-valued theory, nonsmooth analysis, and algebraic graph theory to imbue the proposed constraints with regularity properties so that they can be smoothly combined with other control constraints. We provide simulations and experimental results illustrating the effectiveness and continuity of the proposed approach in a resource gathering problem. △ Less

Submitted 28 June, 2023; v1 submitted 11 December, 2021; originally announced December 2021.

Comments: To appear in Automatica

Phase tuning of multiple Andreev reflections of Dirac fermions and the Josephson supercurrent in Al-MoTe2-Al junctions

Authors: Zheyi Zhu, Stephan Kim, Shiming Lei, Leslie M. Schoop, R. J. Cava, N. P. Ong

Abstract: When a normal metal $N$ is sandwiched between two superconductors, the energy gaps in the latter act as walls that confine electrons in $N$ in a square-well potential. If the voltage $V$ across $N$ is finite, an electron injected into the well undergoes multiple Andreev reflections (MAR) until it gains enough energy to overcome the energy barrier. Because each reflection converts an electron to a… ▽ More When a normal metal $N$ is sandwiched between two superconductors, the energy gaps in the latter act as walls that confine electrons in $N$ in a square-well potential. If the voltage $V$ across $N$ is finite, an electron injected into the well undergoes multiple Andreev reflections (MAR) until it gains enough energy to overcome the energy barrier. Because each reflection converts an electron to a hole (or vice versa), while creating (or destroying) a Cooper pair, the MAR process shuttles a stream of pairs across the junction. An interesting question is, given a finite $V$, what percentage of the shuttled pairs end up as a Josephson supercurrent? This fraction does not seem to have been measured. Here we show that, in high-transparency junctions based on the type II Dirac semimetal MoTe$_2$, the MAR leads to a stair-case profile in the current-voltage ($I$-$V$) response, corresponding to pairs shuttled incoherently by the $n^{th}$-order process. By varying the phase $\varphi$ across the junction, we demonstrate that a Josephson supercurrent ${\bf J}_{\rm s}\sim \sin\varphi$ co-exists with the MAR steps, even at large $V$. The observed linear increase in the amplitude of ${\bf J}_{\rm s}$ with $n$ (for small $n$) implies that ${\bf J}_{\rm s}$ originates from the population of pairs that are coherently shuttled. We infer that the MAR steps and the supercurrent are complementary aspects of the Andreev process. The experiment yields the percentage of shuttled pairs that form the supercurrent. At large $V$, the coherent fraction is initially linear in $n$. However, as $V\to 0$ ($n\gg 1$), almost all the pairs end up as the observed Josephson supercurrent. △ Less

Submitted 8 December, 2021; originally announced December 2021.

Comments: 12 pages, 6 figures

Journal ref: PNAS 119, e2204468119 (2022)

Recent Advances and Applications of Deep Learning Methods in Materials Science

Authors: Kamal Choudhary, Brian DeCost, Chi Chen, Anubhav Jain, Francesca Tavazza, Ryan Cohn, Cheol WooPark, Alok Choudhary, Ankit Agrawal, Simon J. L. Billinge, Elizabeth Holm, Shyue ** Ong, Chris Wolverton

Abstract: Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular.… ▽ More Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular. In contrast, advances in image and spectral data have largely leveraged synthetic data enabled by high quality forward models as well as by generative unsupervised DL methods. In this article, we present a high-level overview of deep-learning methods followed by a detailed discussion of recent developments of deep learning in atomistic simulation, materials imaging, spectral analysis, and natural language processing. For each modality we discuss applications involving both theoretical and experimental data, typical modeling approaches with their strengths and limitations, and relevant publicly available software and datasets. We conclude the review with a discussion of recent cross-cutting work related to uncertainty quantification in this field and a brief perspective on limitations, challenges, and potential growth areas for DL methods in materials science. The application of DL methods in materials science presents an exciting avenue for future materials discovery and design. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Performance-Barrier-Based Event-Triggered Control with Applications to Network Systems

Authors: Pio Ong, Jorge Cortes

Abstract: This paper proposes a novel framework for resource-aware control design termed performance-barrier-based triggering. Given a feedback policy, along with a Lyapunov function certificate that guarantees its correctness, we examine the problem of designing its digital implementation through event-triggered control while ensuring a prescribed performance is met and triggers occur as sparingly as possi… ▽ More This paper proposes a novel framework for resource-aware control design termed performance-barrier-based triggering. Given a feedback policy, along with a Lyapunov function certificate that guarantees its correctness, we examine the problem of designing its digital implementation through event-triggered control while ensuring a prescribed performance is met and triggers occur as sparingly as possible. Our methodology takes into account the performance residual, i.e., how well the system is doing in regards to the prescribed performance. Inspired by the notion of control barrier function, the trigger design allows the certificate to deviate from monotonically decreasing, with leeway specified as an increasing function of the performance residual, resulting in greater flexibility in prescribing update times. We study different types of performance specifications, with particular attention to quantifying the benefits of the proposed approach in the exponential case. We build on this to design intrinsically Zeno-free distributed triggers for network systems. A comparison of event-triggered approaches in a vehicle platooning problem shows how the proposed design meets the prescribed performance with a significantly lower number of controller updates. △ Less

Submitted 28 August, 2021; originally announced August 2021.

Comments: 15 pages, 2 figures, submitted to IEEE Transactions on Automatic Control

Proton distribution visualization in perovskite nickelate devices utilizing nanofocused X-rays

Authors: Ivan A. Zaluzhnyy, Peter O. Sprau, Richard Tran, Qi Wang, Hai-Tian Zhang, Zhen Zhang, Tae Joon Park, Nelson Hua, Boyan Stoychev, Mathew J. Cherukara, Martin V. Holt, Evgeny Nazarertski, Xiao**g Huang, Hanfei Yan, Ajith Pattammattel, Yong S. Chu, Shyue ** Ong, Shriram Ramanathan, Oleg G. Shpyrko, Alex Frano

Abstract: We use a 30-nm x-ray beam to study the spatially resolved properties of a SmNiO$_3$-based nanodevice that is doped with protons. The x-ray absorption spectra supported by density-functional theory (DFT) simulations show partial reduction of nickel valence in the region with high proton concentration, which leads to the insulating behavior. Concurrently, x-ray diffraction reveals only a small latti… ▽ More We use a 30-nm x-ray beam to study the spatially resolved properties of a SmNiO$_3$-based nanodevice that is doped with protons. The x-ray absorption spectra supported by density-functional theory (DFT) simulations show partial reduction of nickel valence in the region with high proton concentration, which leads to the insulating behavior. Concurrently, x-ray diffraction reveals only a small lattice distortion in the doped regions. Together, our results directly show that the knob which proton do** modifies is the electronic valency, and not the crystal lattice. The studies are relevant to on-going efforts to disentangle structural and electronic effects across metal-insulator phase transitions in correlated oxides. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Journal ref: Phys. Rev. Materials 5, 095003 (2021)

Evolving Devil's staircase magnetization from tunable charge density waves in nonsymmorphic Dirac semimetals

Authors: Ratnadwip Singha, Tyger H. Salters, Samuel M. L. Teicher, Shiming Lei, Jason F. Khoury, N. Phuan Ong, Leslie M. Schoop

Abstract: While several magnetic topological semimetals have been discovered in recent years, their band structures are far from ideal, often obscured by trivial bands at the Fermi energy. Square-net materials with clean, linearly dispersing bands show potential to circumvent this issue. CeSbTe, a square-net material, features multiple magnetic field-controllable topological phases. Here, it is shown that i… ▽ More While several magnetic topological semimetals have been discovered in recent years, their band structures are far from ideal, often obscured by trivial bands at the Fermi energy. Square-net materials with clean, linearly dispersing bands show potential to circumvent this issue. CeSbTe, a square-net material, features multiple magnetic field-controllable topological phases. Here, it is shown that in this material, even higher degrees of tunability can be achieved by changing the electron count at the square-net motif. Increased electron filling results in structural distortion and formation of charge density waves (CDWs). The modulation wave-vector evolves continuously leading to a region of multiple discrete CDWs and a corresponding complex "Devil's staircase" magnetic ground state. A series of fractionally quantized magnetization plateaus are observed, which implies direct coupling between CDW and a collective spin-excitation. It is further shown that the CDW creates a robust idealized non-symmorphic Dirac semimetal, thus providing access to topological systems with rich magnetism. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 17 pages, 15 figures, Revised version to appear in Advanced Materials

Journal ref: Advanced Materials 33, 2103476 (2021)

Singular angular magnetoresistance and sharp resonant features in a high-mobility metal with open orbits, ReO3

Authors: Nicholas P. Quirk, Loi T. Nguyen, Jiayi Hu, R. J. Cava, N. P. Ong

Abstract: We report high-resolution angular magnetoresistance (AMR) experiments performed on crystals of ReO$_3$ with high mobility (90,000 cm$^2$/Vs at 2 K) and extremely low residual resistivity (5-8 n$Ω$cm). The Fermi surface, comprised of intersecting cylinders, supports open orbits. The resistivity $ρ_{xx}$ in a magnetic field $B$ = 9 T displays a singular pattern of behavior. With… ▽ More We report high-resolution angular magnetoresistance (AMR) experiments performed on crystals of ReO$_3$ with high mobility (90,000 cm$^2$/Vs at 2 K) and extremely low residual resistivity (5-8 n$Ω$cm). The Fermi surface, comprised of intersecting cylinders, supports open orbits. The resistivity $ρ_{xx}$ in a magnetic field $B$ = 9 T displays a singular pattern of behavior. With $\bf E\parallel \hat{x}$ and $\bf B$ initially $\parallel\bf\hat{z}$, tilting $\bf B$ in the longitudinal $k_z$-$k_x$ plane leads to a steep decrease in $ρ_{xx}$ by a factor of 40. However, if $\bf B$ is tilted in the transverse $k_y$-$k_z$ plane, $ρ_{xx}$ increases steeply by a factor of 8. Using the Shockley tube integral approach, we show that, in ReO$_3$, the singular behavior results from the rapid conversion of closed to open orbits, resulting in opposite signs for AMR in orthogonal planes. The floor values of $ρ_{xx}$ in both AMR scans are identified with specific sets of open and closed orbits. Also, the "completion angle" $γ_c$ detected in the AMR is shown to be an intrinsic geometric feature that provides a new way to measure the Fermi radius $k_F$. However, additional sharp resonant features which appear at very small tilt angles in the longitudinal AMR scans are not explained by the tube integral approach. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. M 5, 105004 (2021)

Emergence of near-boundary segregation zones in face-centered cubic multi-principal element alloys

Authors: Megan J. McCarthy, Hui Zheng, Diran Apelian, William J. Bowman, Horst Hahn, Jian Luo, Shyue ** Ong, Xiaoqing Pan, Timothy J. Rupert

Abstract: Grain boundaries have been shown to dramatically influence the behavior of relatively simple materials such as monatomic metals and binary alloys. The increased chemical complexity associated with multi-principal element alloys is hypothesized to lead to new grain boundary phenomena. To explore the relationship between grain boundary structure and chemistry in these materials, hybrid molecular dyn… ▽ More Grain boundaries have been shown to dramatically influence the behavior of relatively simple materials such as monatomic metals and binary alloys. The increased chemical complexity associated with multi-principal element alloys is hypothesized to lead to new grain boundary phenomena. To explore the relationship between grain boundary structure and chemistry in these materials, hybrid molecular dynamics/Monte Carlo simulations of a faceted Σ11 <110> tilt boundary, chosen to sample both high- and low-energy boundary configurations, are performed in face-centered cubic CrFeCoNiCu and CrFeCoNi equiatomic alloys. Unexpected enrichment of Fe is discovered in the face-centered cubic regions adjacent to the interface and found to be correlated with a structurally-distinct region of reduced atomic volume. Comparison with the boundary of the same type in monatomic Cu demonstrates that altered near-boundary regions exist in simpler systems as well, with the chemical complexity of the multi-principal element alloys highlighting its existence and importance. △ Less

Submitted 10 October, 2021; v1 submitted 17 June, 2021; originally announced June 2021.

Catalogue of Flat-Band Stoichiometric Materials

Authors: Nicolas Regnault, Yuanfeng Xu, Ming-Rui Li, Da-Shuai Ma, Milena Jovanovic, Ali Yazdani, Stuart S. P. Parkin, Claudia Felser, Leslie M. Schoop, N. Phuan Ong, Robert J. Cava, Luis Elcoro, Zhi-Da Song, B. Andrei Bernevig

Abstract: Topological electronic flatten bands near or at the Fermi level are a promising avenue towards unconventional superconductivity and correlated insulating states. However, the related experiments are mostly limited to the engineered materials, such as moire systems. Here we present a catalogue of all the three-dimensional stoichiometric materials with flat bands around the Fermi level that exist in… ▽ More Topological electronic flatten bands near or at the Fermi level are a promising avenue towards unconventional superconductivity and correlated insulating states. However, the related experiments are mostly limited to the engineered materials, such as moire systems. Here we present a catalogue of all the three-dimensional stoichiometric materials with flat bands around the Fermi level that exist in nature. We consider 55,206 materials from the Inorganic Crystal Structure Database catalogued using the Topological Quantum Chemistry website which provides their structural parameters, space group (SG), band structure, density of states and topological characterization. We combine several direct signatures and properties of band flatness to a high-throughput analysis of all crystal structures. In particular, we identify materials hosting line-graph or bipartite sublattices - either in two or three dimensions - likely leading to flat bands. From this trove of information, we create the Materials Flatband Database website, a powerful search engine for future theoretical and experimental studies. We use it to extract a curated list of 2,379 materials, with among them 345 promising candidates, potentially hosting flat bands whose charge centers are not strongly localized on the atomic sites. We showcase five representative materials: KAg[CN]2 in SG 163 $(P\bar{3}1c)$, Pb2Sb2O7 in SG 227 $(Fd\bar{3}m)$, Rb2CaH4 in SG 139 $(I4/mmm)$, Ca2NCl in SG 166 $(R\bar{3}m)$ and WO3 in SG 221 $(Pm\bar{3}m)$. We provide a theoretical explanation for the origin of their flat bands close to the Fermi energy using the $S$-matrix method introduced in a parallel work [Calugaru et al., Nature Physics 18, 185 (2022)]. △ Less

Submitted 15 June, 2022; v1 submitted 9 June, 2021; originally announced June 2021.

Comments: 16+162 pages, 21 tables, 71 figures, published version. This updated version contains an additional appendix providing ferromagnetic calculations for four flat-band materials. Acknowledgements have been fixed

Journal ref: Nature 603, 824-828 (2022)

Accelerating Materials Discovery with Bayesian Optimization and Graph Deep Learning

Authors: Yunxing Zuo, Mingde Qin, Chi Chen, Weike Ye, Xiangguo Li, Jian Luo, Shyue ** Ong

Abstract: Machine learning (ML) models utilizing structure-based features provide an efficient means for accurate property predictions across diverse chemical spaces. However, obtaining equilibrium crystal structures typically requires expensive density functional theory (DFT) calculations, which limits ML-based exploration to either known crystals or a small number of hypothetical crystals. Here, we demons… ▽ More Machine learning (ML) models utilizing structure-based features provide an efficient means for accurate property predictions across diverse chemical spaces. However, obtaining equilibrium crystal structures typically requires expensive density functional theory (DFT) calculations, which limits ML-based exploration to either known crystals or a small number of hypothetical crystals. Here, we demonstrate that the application of Bayesian optimization with symmetry constraints using a graph deep learning energy model can be used to perform "DFT-free" relaxations of crystal structures. Using this approach to significantly improve the accuracy of ML-predicted formation energies and elastic moduli of hypothetical crystals, two novel ultra-incompressible hard materials MoWC2 (P63/mmc) and ReWB (Pca21) were identified and successfully synthesized via in-situ reactive spark plasma sintering from a screening of 399,960 transition metal borides and carbides. This work addresses a critical bottleneck to accurate property predictions for hypothetical materials, paving the way to ML-accelerated discovery of new materials with exceptional properties. △ Less

Submitted 20 April, 2021; originally announced April 2021.

Quantum matter in ultrahigh magnetic fields

Authors: N. P. Ong, Lu Li

Abstract: In writing this report we had two goals in mind. The first is to provide a survey of a subset of discoveries from recent experiments performed on quantum matter in high magnetic fields, and to anticipate the scientific opportunities to be realized in even higher fields. Hopefully, the survey will convey a sense of the excitement and pace of high-magnetic-field research in the quantum-matter commun… ▽ More In writing this report we had two goals in mind. The first is to provide a survey of a subset of discoveries from recent experiments performed on quantum matter in high magnetic fields, and to anticipate the scientific opportunities to be realized in even higher fields. Hopefully, the survey will convey a sense of the excitement and pace of high-magnetic-field research in the quantum-matter community to a broader audience (undergraduates, especially). The second goal is to discuss the comparative merits of two options: a pulsed-field facility for attaining a magnetic field of 150 Tesla (of duration 1-10 msec) or a DC field facility that attains 60 Tesla. A workshop involving leading scientists involved with quantum phenomena in high magnetic fields was held at NSF, Alexandria Sep. 21,22 (2017) to address these issues. △ Less

Submitted 16 March, 2021; originally announced March 2021.

Comments: 24 pages, 14 figures, Report on workshop on "Exploring quantum phenomena and quantum matter in ultrahigh magnetic fields."

Oscillations of the thermal conductivity observed in the spin-liquid state of $α$-RuCl$_3$

Authors: Peter Czajka, Tong Gao, Max Hirschberger, Paula Lampen-Kelley, Arnab Banerjee, Jiaqiang Yan, David G. Mandrus, Stephen E. Nagler, N. P. Ong

Abstract: In the class of materials called spin liquids, a magnetically ordered state cannot be attained even at milliKelvin temperatures because of conflicting constraints on each spin (for e.g. from geometric or exchange frustration). The resulting quantum spin-liquid (QSL) state is currently of intense interest because it exhibits novel excitations as well as wave-function entanglement. The layered insul… ▽ More In the class of materials called spin liquids, a magnetically ordered state cannot be attained even at milliKelvin temperatures because of conflicting constraints on each spin (for e.g. from geometric or exchange frustration). The resulting quantum spin-liquid (QSL) state is currently of intense interest because it exhibits novel excitations as well as wave-function entanglement. The layered insulator $α$-RuCl$_3$ orders as a zigzag antiferromagnet below $\sim$7 K in zero magnetic field. The zigzag order is destroyed when a magnetic field $\bf H$ is applied parallel to the zigzag axis a. Within the field interval (7.3, 11) Tesla, there is growing evidence that a QSL state exists. Here we report the observation of oscillations in its thermal conductivity below 4 K. The oscillation amplitude is very large within the interval (7.3, 11) T and strongly suppressed on either side. Paradoxically, the oscillations are periodic in 1/\emph{H}, analogous to quantum oscillations in metals, even though $α$-RuCl$_3$ is an excellent insulator with a gap of 1.9 eV. By tilting $\bf H$ out of the plane, we find that the oscillation period is determined by the in-plane component $H_a$. As the temperature is raised above 0.5 K, the oscillation amplitude decreases exponentially. The decrease anticorrelates with the emergence above $\sim$2 K of an anomalous planar thermal Hall conductivity measured with $\bf H\parallel a$. To exclude extrinsic artifacts, we carried out several tests. The implications of the oscillations are discussed. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 8 pages, 3 figures

Journal ref: Nature Physics 1-5, 13th May 2021

Bridging the Gap Between Simulated and Experimental Ionic Conductivities in Lithium Superionic Conductors

Authors: Ji Qi, Swastika Banerjee, Yunxing Zuo, Chi Chen, Zhuoying Zhu, H. C. Manas Likhit, Xiangguo Li, Shyue ** Ong

Abstract: Lithium superionic conductors (LSCs) are of major importance as solid electrolytes for next-generation all-solid-state lithium-ion batteries. While $ab$ $initio$ molecular dynamics have been extensively applied to study these materials, there are often large discrepancies between predicted and experimentally measured ionic conductivities and activation energies due to the high temperatures and sho… ▽ More Lithium superionic conductors (LSCs) are of major importance as solid electrolytes for next-generation all-solid-state lithium-ion batteries. While $ab$ $initio$ molecular dynamics have been extensively applied to study these materials, there are often large discrepancies between predicted and experimentally measured ionic conductivities and activation energies due to the high temperatures and short time scales of such simulations. Here, we present a strategy to bridge this gap using moment tensor potentials (MTPs). We show that MTPs trained on energies and forces computed using the van der Waals optB88 functional yield much more accurate lattice parameters, which in turn leads to accurate prediction of ionic conductivities and activation energies for the Li$_{0.33}$La$_{0.56}$TiO$_3$, Li$_3$YCl$_6$ and Li$_7$P$_3$S$_{11}$ LSCs. NPT MD simulations using the optB88 MTPs also reveal that all three LSCs undergo a transition between two quasi-linear Arrhenius regimes at relatively low temperatures. This transition can be traced to an expansion in the number and diversity of diffusion pathways, in some cases with a change in the dimensionality of diffusion. This work presents not only an approach to develop high accuracy MTPs, but also outlines the diffusion characteristics for LSCs which is otherwise inaccessible through $ab$ $initio$ computation. △ Less

Submitted 20 June, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Comments: Main text: 22 pages excluding references, 6 figures; Supporting information: 13 pages, 12 figures. Submitted to Materials Today Physics

AtomSets -- A Hierarchical Transfer Learning Framework for Small and Large Materials Datasets

Authors: Chi Chen, Shyue ** Ong

Abstract: Predicting materials properties from composition or structure is of great interest to the materials science community. Deep learning has recently garnered considerable interest in materials predictive tasks with low model errors when dealing with large materials data. However, deep learning models suffer in the small data regime that is common in materials science. Here we leverage the transfer le… ▽ More Predicting materials properties from composition or structure is of great interest to the materials science community. Deep learning has recently garnered considerable interest in materials predictive tasks with low model errors when dealing with large materials data. However, deep learning models suffer in the small data regime that is common in materials science. Here we leverage the transfer learning concept and the graph network deep learning framework and develop the AtomSets machine learning framework for consistent high model accuracy at both small and large materials data. The AtomSets models can work with both compositional and structural materials data. By combining with transfer learned features from graph networks, they can achieve state-of-the-art accuracy from using small compositional data (<400) to large structural data (>130,000). The AtomSets models show much lower errors than the state-of-the-art graph network models at small data limits and the classical machine learning models at large data limits. They also transfer better in the simulated materials discovery process where the targeted materials have property values out of the training data limits. The models require minimal domain knowledge inputs and are free from feature engineering. The presented AtomSets model framework opens new routes for machine learning-assisted materials design and discovery. △ Less

Submitted 5 February, 2021; v1 submitted 3 February, 2021; originally announced February 2021.

The Breakdown of Mott Physics at VO$_2$ Surfaces

Authors: Matthew J. Wahila, Nicholas F. Quackenbush, Jerzy T. Sadowski, Jon-Olaf Krisponeit, Jan Ingo Flege, Richard Tran, Shyue ** Ong, Christoph Schlueter, Tien-Lin Lee, Megan E. Holtz, David A. Muller, Hanjong Paik, Darrell G. Schlom, Wei-Cheng Lee, Louis F. J. Piper

Abstract: Transition metal oxides such as vanadium dioxide (VO$_2$), niobium dioxide (NbO$_2$), and titanium sesquioxide (Ti$_2$O$_3$) are known to undergo a temperature-dependent metal-insulator transition (MIT) in conjunction with a structural transition within their bulk. However, it is not typically discussed how breaking crystal symmetry via surface termination affects the complicated MIT physics. Usin… ▽ More Transition metal oxides such as vanadium dioxide (VO$_2$), niobium dioxide (NbO$_2$), and titanium sesquioxide (Ti$_2$O$_3$) are known to undergo a temperature-dependent metal-insulator transition (MIT) in conjunction with a structural transition within their bulk. However, it is not typically discussed how breaking crystal symmetry via surface termination affects the complicated MIT physics. Using synchrotron-based x-ray spectroscopy, low energy electron diffraction (LEED), low energy electron microscopy (LEEM), transmission electron microscopy (TEM), and several other experimental techniques, we show that suppression of the bulk structural transition is a common feature at VO$_2$ surfaces. Our density functional theory (DFT) calculations further suggest that this is due to inherent reconstructions necessary to stabilize the surface, which deviate the electronic structure away from the bulk d$^1$ configuration. Our findings have broader ramifications not only for the characterization of other "Mott-like" MITs, but also for any potential device applications of such materials. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Parametric Flatten-T Swish: An Adaptive Non-linear Activation Function For Deep Learning

Authors: Hock Hung Chieng, Noorhaniza Wahid, Pauline Ong

Abstract: Activation function is a key component in deep learning that performs non-linear map**s between the inputs and outputs. Rectified Linear Unit (ReLU) has been the most popular activation function across the deep learning community. However, ReLU contains several shortcomings that can result in inefficient training of the deep neural networks, these are: 1) the negative cancellation property of Re… ▽ More Activation function is a key component in deep learning that performs non-linear map**s between the inputs and outputs. Rectified Linear Unit (ReLU) has been the most popular activation function across the deep learning community. However, ReLU contains several shortcomings that can result in inefficient training of the deep neural networks, these are: 1) the negative cancellation property of ReLU tends to treat negative inputs as unimportant information for the learning, resulting in a performance degradation; 2) the inherent predefined nature of ReLU is unlikely to promote additional flexibility, expressivity, and robustness to the networks; 3) the mean activation of ReLU is highly positive and leads to bias shift effect in network layers; and 4) the multilinear structure of ReLU restricts the non-linear approximation power of the networks. To tackle these shortcomings, this paper introduced Parametric Flatten-T Swish (PFTS) as an alternative to ReLU. By taking ReLU as a baseline method, the experiments showed that PFTS improved classification accuracy on SVHN dataset by 0.31%, 0.98%, 2.16%, 17.72%, 1.35%, 0.97%, 39.99%, and 71.83% on DNN-3A, DNN-3B, DNN-4, DNN- 5A, DNN-5B, DNN-5C, DNN-6, and DNN-7, respectively. Besides, PFTS also achieved the highest mean rank among the comparison methods. The proposed PFTS manifested higher non-linear approximation power during training and thereby improved the predictive performance of the networks. △ Less

Submitted 26 February, 2022; v1 submitted 5 November, 2020; originally announced November 2020.

Comments: 19 pages

MSC Class: 68T07 ACM Class: I.2.1

Journal ref: Journal of Information and Communication Technology, 20(1), 21-39, 2021

Review of experiments on the chiral anomaly in Dirac-Weyl semimetals

Authors: N. P. Ong, Sihang Liang

Abstract: We provide a review of recent experimental results on the chiral anomaly in Dirac/Weyl semimetals. After a brief introduction, we trace the steps leading to the prediction of materials that feature protected 3D bulk Dirac nodes. The chiral anomaly is presented in terms of charge pum** between the chiral Landau levels of Weyl fermions in parallel electric and magnetic fields. The related chiral m… ▽ More We provide a review of recent experimental results on the chiral anomaly in Dirac/Weyl semimetals. After a brief introduction, we trace the steps leading to the prediction of materials that feature protected 3D bulk Dirac nodes. The chiral anomaly is presented in terms of charge pum** between the chiral Landau levels of Weyl fermions in parallel electric and magnetic fields. The related chiral magnetic effect and chiral zero sound are described. Current jetting effects, which present major complications in experiments on the longitudinal magnetoresistance, are carefully analyzed. We describe a recent test that is capable of distinguishing these semiclassical artifacts from intrinsic quantum effects. Turning to experiments, we review critically the longitudinal magnetoresistance experiments in the Dirac/Weyl semimetals Na3Bi, GdPtBi, ZrTe5 and TaAs. Alternate approaches to the chiral anomaly, including experiments on non-local transport, thermopower, thermal conductivity and optical pump-probe response are reviewed. In the Supplement, we provide a brief discussion of the chiral anomaly in the broader context of high energy physics and relativistic quantum field theory, as well the anomaly's starring role at the nexus of quantum physics and differential geometry. △ Less

Submitted 16 October, 2020; originally announced October 2020.

Comments: 20 pages, 9 figures

Journal ref: Nature Review Physics 3, 394 (2021)

Band Engineering of Dirac Semimetals using Charge Density Waves

Authors: Shiming Lei, Samuel M. L. Teicher, Andreas Topp, Kehan Cai, **g**g Lin, Fanny Rodolakis, Jessica L. McChesney, Maxim Krivenkov, Dmitry Marchenko, Andrei Varykhalov, Christian R. Ast, Roberto Car, Jennifer Cano, Maia G. Vergniory, N. Phuan Ong, Leslie M. Schoop

Abstract: New developments in the field of topological matter are often driven by materials discovery, including novel topological insulators, Dirac semimetals and Weyl semimetals. In the last few years, large efforts have been performed to classify all known inorganic materials with respect to their topology. Unfortunately, a large number of topological materials suffer from non-ideal band structures. For… ▽ More New developments in the field of topological matter are often driven by materials discovery, including novel topological insulators, Dirac semimetals and Weyl semimetals. In the last few years, large efforts have been performed to classify all known inorganic materials with respect to their topology. Unfortunately, a large number of topological materials suffer from non-ideal band structures. For example, topological bands are frequently convoluted with trivial ones, and band structure features of interest can appear far below the Fermi level. This leaves just a handful of materials that are intensively studied. Finding strategies to design new topological materials is a solution. Here we introduce a new mechanism that is based on charge density waves and non-symmorphic symmetry to design an idealized Dirac semimetal. We then show experimentally that the antiferromagnetic compound GdSb$_{0.46}$Te$_{1.48}$ is a nearly ideal Dirac semimetal based on the proposed mechanism, meaning that most interfering bands at the Fermi level are suppressed. Its highly unusual transport behavior points to a thus far unknown regime, in which Dirac carriers with Fermi energy very close to the node seem to gradually localize in the presence of lattice and magnetic disorder. △ Less

Submitted 21 June, 2021; v1 submitted 1 September, 2020; originally announced September 2020.

Learning Properties of Ordered and Disordered Materials from Multi-fidelity Data

Authors: Chi Chen, Yunxing Zuo, Weike Ye, Xiangguo Li, Shyue ** Ong

Abstract: Predicting the properties of a material from the arrangement of its atoms is a fundamental goal in materials science. While machine learning has emerged in recent years as a new paradigm to provide rapid predictions of materials properties, their practical utility is limited by the scarcity of high-fidelity data. Here, we develop multi-fidelity graph networks as a universal approach to achieve acc… ▽ More Predicting the properties of a material from the arrangement of its atoms is a fundamental goal in materials science. While machine learning has emerged in recent years as a new paradigm to provide rapid predictions of materials properties, their practical utility is limited by the scarcity of high-fidelity data. Here, we develop multi-fidelity graph networks as a universal approach to achieve accurate predictions of materials properties with small data sizes. As a proof of concept, we show that the inclusion of low-fidelity Perdew-Burke-Ernzerhof band gaps greatly enhances the resolution of latent structural features in materials graphs, leading to a 22-45\% decrease in the mean absolute errors of experimental band gap predictions. We further demonstrate that learned elemental embeddings in materials graph networks provide a natural approach to model disorder in materials, addressing a fundamental gap in the computational prediction of materials properties. △ Less

Submitted 28 January, 2021; v1 submitted 8 May, 2020; originally announced May 2020.

Journal ref: Nat. Comput. Sci. 1 (2021) 46-53

Safety-Critical Event Triggered Control via Input-to-State Safe Barrier Functions

Authors: Andrew J. Taylor, Pio Ong, Jorge Cortes, Aaron D. Ames

Abstract: The efficient utilization of available resources while simultaneously achieving control objectives is a primary motivation in the event-triggered control paradigm. In many modern control applications, one such objective is enforcing the safety of a system. The goal of this paper is to carry out this vision by combining event-triggered and safety-critical control design. We discuss how a direct tra… ▽ More The efficient utilization of available resources while simultaneously achieving control objectives is a primary motivation in the event-triggered control paradigm. In many modern control applications, one such objective is enforcing the safety of a system. The goal of this paper is to carry out this vision by combining event-triggered and safety-critical control design. We discuss how a direct transcription, in the context of safety, of event-triggered methods for stabilization may result in designs that are not implementable on real hardware due to the lack of a minimum interevent time. We provide a counterexample showing this phenomena and, building on the insight gained, propose an event-triggered control approach via Input to State Safe Barrier Functions that achieves safety while ensuring that interevent times are uniformly lower bounded. We illustrate our results in simulation. △ Less

Submitted 15 March, 2020; originally announced March 2020.

Comments: 6 pages, 2 figures, submitted to L-CSS + CDC 2020

Genetic Algorithm-Guided Deep Learning of Grain Boundary Diagrams: Addressing the Challenge of Five Degrees of Freedom

Authors: Chongze Hu, Yunxing Zuo, Chi Chen, Shyue ** Ong, Jian Luo

Abstract: Grain boundaries (GBs) often control the processing and properties of polycrystalline materials. Here, a potentially transformative research is represented by constructing GB property diagrams as functions of temperature and bulk composition, also called "complexion diagrams," as a general materials science tool on par with phase diagrams. However, a GB has five macroscopic (crystallographic) degr… ▽ More Grain boundaries (GBs) often control the processing and properties of polycrystalline materials. Here, a potentially transformative research is represented by constructing GB property diagrams as functions of temperature and bulk composition, also called "complexion diagrams," as a general materials science tool on par with phase diagrams. However, a GB has five macroscopic (crystallographic) degrees of freedom (DOFs). It is essentially a "mission impossible" to construct property diagrams for GBs as a function of five DOFs by either experiments or modeling. Herein, we combine isobaric semi-grand-canonical ensemble hybrid Monte Carlo and molecular dynamics (hybrid MC/MD) simulations with a genetic algorithm (GA) and deep neural network (DNN) models to tackle this grand challenge. The DNN prediction is ~108 faster than atomistic simulations, thereby enabling the construction of the property diagrams for millions of distinctly different GBs of five DOFs. Notably, excellent prediction accuracies have been achieved for not only symmetric-tilt and twist GBs, but also asymmetric-tilt and mixed tilt-twist GBs; the latter are more complex and much less understood, but they are ubiquitous and often limit the performance properties of real polycrystals as the weak links. The data-driven prediction of GB properties as function of temperature, bulk composition, and five crystallographic DOFs (i.e., in a 7D space) opens a new paradigm. △ Less

Submitted 24 February, 2020; originally announced February 2020.