-
Fleet Size and Spill for UAM Operation under Uncertain Demand
Authors:
Shangqing Cao,
Xuan Jiang,
Emin Burak Onat,
Bo Zou,
Mark Hansen,
Raja Sengupta,
Anjan Chakrabarty
Abstract:
Variation and imbalance in demand poses significant challenges to Urban Air Mobility (UAM) operations, affecting strategic decisions such as fleet sizing. To study the implications of demand variation on UAM fleet operations, we propose a stochastic passenger arrival time generation model that uses real-world data to infer demand distributions, and two integer programs that compute the zero-spill…
▽ More
Variation and imbalance in demand poses significant challenges to Urban Air Mobility (UAM) operations, affecting strategic decisions such as fleet sizing. To study the implications of demand variation on UAM fleet operations, we propose a stochastic passenger arrival time generation model that uses real-world data to infer demand distributions, and two integer programs that compute the zero-spill fleet size and the spill-minimizing flight schedules and charging policies, respectively. Our numerical experiment on a two-vertiport network shows that spill in relatively inelastic to fleet size and that the driving factor behind spill is the imbalance in demand.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
A Simulation-Optimization Framework for Develo** Wind-Resilient AAM Networks
Authors:
Emin Burak Onat,
Shangqing Cao,
Raiyan Rizwan,
Xuan Jiang,
Mark Hansen,
Raja Sengupta,
Anjan Chakrabarty
Abstract:
Environmental factors pose a significant challenge to the operational efficiency and safety of advanced air mobility (AAM) networks. This paper presents a simulation-optimization framework that dynamically integrates wind variability into AAM operations. We employ a nonlinear charging model within a multi-vertiport environment to optimize fleet size and scheduling. Our framework assesses the impac…
▽ More
Environmental factors pose a significant challenge to the operational efficiency and safety of advanced air mobility (AAM) networks. This paper presents a simulation-optimization framework that dynamically integrates wind variability into AAM operations. We employ a nonlinear charging model within a multi-vertiport environment to optimize fleet size and scheduling. Our framework assesses the impact of wind on operational parameters, providing strategies to enhance the resilience of AAM ecosystems. The results demonstrate that wind conditions exert significant influence on fleet size even for short-distance flights, their impact on fleet size and energy requirements becomes more pronounced over longer distances. Efficient management of fleet size and charging policies, particularly for long-distance networks, is needed to accommodate the variability of wind conditions effectively.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Integrated workflows and interfaces for data-driven semi-empirical electronic structure calculations
Authors:
Pavel Stishenko,
Adam McSloy,
Berk Onat,
Ben Hourahine,
Reinhard J. Maurer,
James R. Kermode,
Andrew Logsdail
Abstract:
Modern software engineering of electronic structure codes has seen a paradigm shift from monolithic workflows towards object-based modularity. Software objectivity allows for greater flexibility in the application of electronic structure calculations, with particular benefits when integrated with approaches for data-driven analysis. Here, we discuss different approaches to create "deep" modular in…
▽ More
Modern software engineering of electronic structure codes has seen a paradigm shift from monolithic workflows towards object-based modularity. Software objectivity allows for greater flexibility in the application of electronic structure calculations, with particular benefits when integrated with approaches for data-driven analysis. Here, we discuss different approaches to create "deep" modular interfaces that connect big-data workflows and electronic structure codes, and explore the diversity of use cases that they can enable. We present two such interface approaches for the semi-empirical electronic structure package, DFTB+. In one case, DFTB+ is applied as a library and provides data to an external workflow; and in another, DFTB+ receives data via external bindings and processes the information subsequently within an internal workflow. We provide a general framework to enable data exchange workflows for embedding new machine-learning-based Hamiltonians within DFTB+, or to enabling deep integration of DFTB+ in multiscale embedding workflows. These modular interfaces demonstrate opportunities in emergent software and workflows to accelerate scientific discovery by harnessing existing software capabilities.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Evaluating eVTOL Network Performance and Fleet Dynamics through Simulation-Based Analysis
Authors:
Emin Burak Onat,
Vishwanath Bulusu,
Anjan Chakrabarty,
Mark Hansen,
Raja Sengupta,
Banavar Sridar
Abstract:
Urban Air Mobility (UAM) represents a promising solution for future transportation. In this study, we introduce VertiSim, an advanced event-driven simulator developed to evaluate e-VTOL transportation networks. Uniquely, VertiSim simultaneously models passenger, aircraft, and energy flows, reflecting the interrelated complexities of UAM systems. We utilized VertiSim to assess 19 operational scenar…
▽ More
Urban Air Mobility (UAM) represents a promising solution for future transportation. In this study, we introduce VertiSim, an advanced event-driven simulator developed to evaluate e-VTOL transportation networks. Uniquely, VertiSim simultaneously models passenger, aircraft, and energy flows, reflecting the interrelated complexities of UAM systems. We utilized VertiSim to assess 19 operational scenarios serving a daily demand for 2,834 passengers with varying fleet sizes and vertiport distances. The study aims to support stakeholders in making informed decisions about fleet size, network design, and infrastructure development by understanding tradeoffs in passenger delay time, operational costs, and fleet utilization. Our simulations, guided by a heuristic dispatch and charge policy, indicate that fleet size significantly influences passenger delay and energy consumption within UAM networks. We find that increasing the fleet size can reduce average passenger delays, but this comes at the cost of higher operational expenses due to an increase in the number of repositioning flights. Additionally, our analysis highlights how vertiport distances impact fleet utilization: longer distances result in reduced total idle time and increased cruise and charge times, leading to more efficient fleet utilization but also longer passenger delays. These findings are important for UAM network planning, especially in balancing fleet size with vertiport capacity and operational costs. Simulator demo is available at: https://tinyurl.com/vertisim-vis
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Shared Metadata for Data-Centric Materials Science
Authors:
Luca M. Ghiringhelli,
Carsten Baldauf,
Tristan Bereau,
Sandor Brockhauser,
Christian Carbogno,
Javad Chamanara,
Stefano Cozzini,
Stefano Curtarolo,
Claudia Draxl,
Shyam Dwaraknath,
Ádám Fekete,
James Kermode,
Christoph T. Koch,
Markus Kühbach,
Alvin Noe Ladines,
Patrick Lambrix,
Maja-Olivia Lenz-Himmer,
Sergey Levchenko,
Micael Oliveira,
Adam Michalchuk,
Ron Miller,
Berk Onat,
Pasquale Pavone,
Giovanni Pizzi,
Benjamin Regler
, et al. (10 additional authors not shown)
Abstract:
The expansive production of data in materials science, their widespread sharing and repurposing requires educated support and stewardship. In order to ensure that this need helps rather than hinders scientific work, the implementation of the FAIR-data principles (Findable, Accessible, Interoperable, and Reusable) must not be too narrow. Besides, the wider materials-science community ought to agree…
▽ More
The expansive production of data in materials science, their widespread sharing and repurposing requires educated support and stewardship. In order to ensure that this need helps rather than hinders scientific work, the implementation of the FAIR-data principles (Findable, Accessible, Interoperable, and Reusable) must not be too narrow. Besides, the wider materials-science community ought to agree on the strategies to tackle the challenges that are specific to its data, both from computations and experiments. In this paper, we present the result of the discussions held at the workshop on "Shared Metadata and Data Formats for Big-Data Driven Materials Science". We start from an operative definition of metadata, and what features a FAIR-compliant metadata schema should have. We will mainly focus on computational materials-science data and propose a constructive approach for the FAIRification of the (meta)data related to ground-state and excited-states calculations, potential-energy sampling, and generalized workflows. Finally, challenges with the FAIRification of experimental (meta)data and materials-science ontologies are presented together with an outlook of how to meet them.
△ Less
Submitted 23 August, 2023; v1 submitted 29 May, 2022;
originally announced May 2022.
-
Equivariant analytical map** of first principles Hamiltonians to accurate and transferable materials models
Authors:
Liwei Zhang,
Berk Onat,
Geneviève Dusson,
Adam McSloy,
Gautam Anand,
Reinhard J Maurer,
Christoph Ortner,
James R Kermode
Abstract:
We propose a scheme to construct predictive models for Hamiltonian matrices in atomic orbital representation from ab initio data as a function of atomic and bond environments. The scheme goes beyond conventional tight binding descriptions as it represents the ab initio model to full order, rather than in two-centre or three-centre approximations. We achieve this by introducing an extension to the…
▽ More
We propose a scheme to construct predictive models for Hamiltonian matrices in atomic orbital representation from ab initio data as a function of atomic and bond environments. The scheme goes beyond conventional tight binding descriptions as it represents the ab initio model to full order, rather than in two-centre or three-centre approximations. We achieve this by introducing an extension to the Atomic Cluster Expansion (ACE) descriptor that represents Hamiltonian matrix blocks that transform equivariantly with respect to the full rotation group. The approach produces analytical linear models for the Hamiltonian and overlap matrices. Through an application to aluminium, we demonstrate that it is possible to train models from a handful of structures computed with density functional theory, and apply them to produce accurate predictions for the electronic structure. The model generalises well and is able to predict defects accurately from only bulk training data.
△ Less
Submitted 25 July, 2022; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Sensitivity and Dimensionality of Atomic Environment Representations used for Machine Learning Interatomic Potentials
Authors:
Berk Onat,
Christoph Ortner,
James R. Kermode
Abstract:
Faithfully representing chemical environments is essential for describing materials and molecules with machine learning approaches. Here, we present a systematic classification of these representations and then investigate: (i) the sensitivity to perturbations and (ii) the effective dimensionality of a variety of atomic environment representations, and over a range of material datasets. Representa…
▽ More
Faithfully representing chemical environments is essential for describing materials and molecules with machine learning approaches. Here, we present a systematic classification of these representations and then investigate: (i) the sensitivity to perturbations and (ii) the effective dimensionality of a variety of atomic environment representations, and over a range of material datasets. Representations investigated include Atom Centred Symmetry Functions, Chebyshev Polynomial Symmetry Functions (CHSF), Smooth Overlap of Atomic Positions, Many-body Tensor Representation and Atomic Cluster Expansion. In area (i), we show that none of the atomic environment representations are linearly stable under tangential perturbations, and that for CHSF there are instabilities for particular choices of perturbation, which we show can be removed with a slight redefinition of the representation. In area (ii), we find that most representations can be compressed significantly without loss of precision, and further that selecting optimal subsets of a representation method improves the accuracy of regression models built for a given dataset.
△ Less
Submitted 9 September, 2020; v1 submitted 2 June, 2020;
originally announced June 2020.
