Showing 1–17 of 17 results for author: Olsson, R H

Periodically Poled Aluminum Scandium Nitride Bulk Acoustic Wave Resonators and Filters for Communications in the 6G Era

Authors: Izhar, M. M. A. Fiagbenu, S. Yao, X. Du, P. Musavigharavi, Y. Deng, J. Leathersic, C. Moe, A. Kochhar, E. A. Stach, R. Vetury, R. H. Olsson III

Abstract: Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of re… ▽ More Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of resonator devices formed in traditional uniform polarization piezoelectric films of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) decrease when scaled beyond 8 GHz. In this work, we utilized 4-layer AlScN periodically poled piezoelectric films (P3F) to construct high frequency (~17-18 GHz) resonators and filters. The resonator performance is studied over a range of device geometries, with the best resonator achieving a k_t^2 of 11.8% and a Q_p of 236.6 at the parallel resonance frequency (fp) of 17.9 GHz. These resulting figures of merit are ((FoM)_1=(k_t^2 Q)_p and (FoM_2=f_p(FoM)_1x10^-9) ) 27.9 and 500 respectively. These and the k_t^2 are significantly higher than previously reported An/AlScN-based resonators operating at similar frequencies. Fabricated 3-element and 6-element filters formed from these resonators demonstrated low insertion losses (IL) of 1.86 dB and 3.25 dB, and -3 dB bandwidths (BW) of 680 MHz (fractional BW of 3.9%) and 590 MHz (fractional BW of 3.3%) at ~17.4 GHz center frequency. The 3-element and 6-element filters achieved excellent linearity with in-band input third-order intercept point (IIP3) values of +36 dBm and +40 dBm, respectively, which are significantly higher than previously reported acoustic filters operating at similar frequencies. △ Less

Submitted 24 May, 2024; originally announced June 2024.

High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities

Authors: Seunguk Song, Kwan-Ho Kim, Rachael Keneipp, Nicholas Trainor, Chen Chen, Jeffrey Zheng, Joan M. Redwing, Marija Drndić, Roy H. Olsson III, Deep Jariwala

Abstract: Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistan… ▽ More Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 42 pages, 5 main figures

CMOS-Compatible, AlScN-Based Integrated Electro-Optic Modulator

Authors: Valerie Yoshioka, Jicheng **, Haiqi Zhou, Zichen Tang, Roy H. Olsson III, Bo Zhen

Abstract: Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indica… ▽ More Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indicating the possibility for efficient modulation. Here, we measure the electro-optic effect in AlScN-based modulators, demonstrating $V_πL$ around 750 V$\cdot$cm. Since the electro-optic response is smaller than expected, we discuss potential causes for the reduced response and future outlook for AlScN-based photonics. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Comments: 9 pages, 3 figures

Materials for High Temperature Digital Electronics

Authors: Dhiren K. Pradhan, David C. Moore, A. Matt Francis, Jacob Kupernik, W. Joshua Kennedy, Nicholas R. Glavin, Roy H. Olsson III, Deep Jariwala

Abstract: Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of s… ▽ More Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of space exploration, geothermal energy harvesting, nuclear energy, unmanned avionic systems, and autonomous driving will rely on control systems, sensors, and communication devices which operate at temperatures as high as 500 °C and beyond. At these extreme temperatures, active (heat exchanger, phase change cooling) or passive (fins and thermal interface materials) cooling strategies add significant mass and complication which is often infeasible. Thus, new material solutions beyond conventional silicon CMOS devices are necessary for high temperature, resilient electronic systems. Accomplishing this will require a united effort to explore development, integration, and ultimately manufacturing of non-silicon-based logic and memory technologies, non-traditional metals for interconnects, and ceramic packaging technology. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: 6 Figures

Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes

Authors: Kwan-Ho Kim, Zirun Han, Yinuo Zhang, Pariasadat Musavigharavi, Jeffrey Zheng, Dhiren K. Pradhan, Eric A. Stach, Roy H. Olsson III, Deep Jariwala

Abstract: The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherent… ▽ More The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherently selector-free nature, facilitating high-density crossbar arrays. Here, we demonstrate BEOL-compatible, high-performance FE-diodes scaled to 5, 10, and 20 nm FE Al0.72Sc0.28N/Al0.64Sc0.36N films. Through interlayer (IL) engineering, we show substantial improvements in the ON/OFF ratios (>166 times) and rectification ratios (>176 times) in these scaled devices. The superlative characteristics also enables 5-bit multi-state operation with a stable retention. We also experimentally and theoretically demonstrate the counterintuitive result that the inclusion of an IL can lead to a decrease in the ferroelectric switching voltage of the device. An in-depth analysis into the device transport mechanisms is performed, and our compact model aligns seamlessly with the experimental results. Our results suggest the possibility of using scaled AlxSc1-xN FE-diodes for high performance, low-power, embedded NVM. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC

Authors: Xingyu Du, Nishant Sharma, Zichen Tang, Chloe Leblanc, Deep Jariwala, Roy H. Olsson III

Abstract: Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin fi… ▽ More Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin films on SiC substrates, utilizing the second SAW mode (referred to as the Sezawa mode). The resonators achieve remarkable performance, boasting a K2 value of 5.5% and a maximum Q-factor (Qmax) of 1048 at 4.7 GHz, outperforming previous benchmarks. Additionally, a SAW resonator with a 960 nm wavelength attains 5.9 GHz frequency with record K2 (4.0%) and Qmax (887). Our study underscores the potential of the AlScN on SiC platform for advanced radio-frequency applications. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: 19 pages, 5 figures in main text and 3 figures in supplementary

Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures

Authors: Simrjit Singh, Kwan-Ho Kim, Kiyoung Jo, Pariasadat Musavigharavi, Bumho Kim, Jeffrey Zheng, Nicholas Trainor, Chen Chen, Joan M. Redwing, Eric A Stach, Roy H Olsson III, Deep Jariwala

Abstract: Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff… ▽ More Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Manuscript (22 pages and 5 figures), supporting information

S-band acoustoelectric amplifier utilizing an ultra-high thermal conductivity heterostructure for low self-heating

Authors: Lisa Hackett, Xingyu Du, Michael Miller, Brandon Smith, Steven Santillan, Josh Montoya, Robert Reyna, Shawn Arterburn, Scott Weatherrend, Thomas A. Friedmann, Roy H. Olsson III, Matt Eichenfield

Abstract: Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron… ▽ More Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron thick) piezoelectric film to be deposited on a thermally conductive bulk substrate (370 W/m-K for 4H-SiC), enabling negligible self-heating when combined with the In$_{0.53}$Ga$_{0.47}$As semiconductor parameters of large mobility (~7000 cm$^2$/V-s) and low concentration of charge carriers (~5x10$^{15}$ cm$^{-3}$). A Sezawa mode with optimal overlap between the peak of its evanescent electric field and the semiconductor charge carriers is supported. The high velocity of the heterostructure materials allows us to operate the Sezawa mode amplifier at 3.05 GHz, demonstrating a gain of 500 dB/cm (40 dB in 800 microns). Additionally, a terminal end-to-end radio frequency gain of 7.7 dB and a nonreciprocal transmission of 52.6 dB are achieved with a dissipated DC power of 2.3 mW. The power added efficiency and acoustic noise figure are also characterized. △ Less

Submitted 28 September, 2023; v1 submitted 27 September, 2023; originally announced September 2023.

Scalable and Stable Ferroelectric Non-Volatile Memory at > 500 $^\circ$C

Authors: Dhiren K. Pradhan, David C. Moore, Gwangwoo Kim, Yunfei He, Pariasadat Musavigharavi, Kwan-Ho Kim, Nishant Sharma, Zirun Han, Xingyu Du, Venkata S. Puli, Eric A. Stach, W. Joshua Kennedy, Nicholas R. Glavin, Roy H. Olsson III, Deep Jariwala

Abstract: Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices ope… ▽ More Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices operating at very high temperatures (> 500 $^\circ$C) given its stable and high remnant polarization (PR) above 100 $μ$C/cm$^2$ with demonstrated ferroelectric transition temperature (TC) > 1000 $^\circ$C. Here, we demonstrate an Al$_{0.68}$Sc$_{0.32}$N ferroelectric diode based NVM device that can reliably operate with clear ferroelectric switching up to 600 $^\circ$C with distinguishable On and Off states. The coercive field (EC) from the Pulsed I-V measurements is found to be -5.84 (EC-) and +5.98 (EC+) (+/- 0.1) MV/cm at room temperature (RT) and found to decrease with increasing temperature up to 600 $^\circ$C. The devices exhibit high remnant polarizations (> 100 $μ$C/cm$^2$) which are stable at high temperatures. At 500 $^\circ$C, our devices show 1 million read cycles and stable On-Off ratio above 1 for > 6 hours. Finally, the operating voltages of our AlScN ferrodiodes are < 15 V at 600 $^\circ$C which is well matched and compatible with Silicon Carbide (SiC) based high temperature logic technology, thereby making our demonstration a major step towards commercialization of NVM integrated high-T computers. △ Less

Submitted 8 September, 2023; originally announced September 2023.

Comments: MS and SI

Frequency Tunable Magnetostatic Wave Filters With Zero Static Power Magnetic Biasing Circuitry

Authors: Xingyu Du, Mohamad Hossein Idjadi, Yixiao Ding, Tao Zhang, Alexander J. Geers, Shun Yao, Jun Beom Pyo, Firooz Aflatouni, Mark Allen, Roy H. Olsson III

Abstract: A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsui… ▽ More A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsuitable for consumer wireless applications. Here, we demonstrate miniature and high selectivity MSW tunable filters with zero static power consumption, occupying less than 2 cc. The center frequency is continuously tunable from 3.4 GHz to 11.1 GHz via current pulses of sub-millisecond duration applied to a small and nonvolatile magnetic bias assembly. This assembly is limited in the area over which it can achieve a large and uniform magnetic field, necessitating filters realized from small resonant cavities micromachined in thin films of Yttrium Iron Garnet. Filter insertion loss of 3.2 dB to 5.1 dB and out-of-band third order input intercept point greater than 41 dBm are achieved. The filter's broad frequency range, compact size, low insertion loss, high out-of-band linearity, and zero static power consumption are essential for protecting RF transceivers and antennas from interference, thus facilitating their use in mobile applications like IoT and 6G networks. △ Less

Submitted 19 September, 2023; v1 submitted 1 August, 2023; originally announced August 2023.

Comments: 65 pages, PDF; one supplementary note added, Revised spelling error in acknowledgement, results unchanged

MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors

Authors: Seunguk Song, Kwan-Ho Kim, Srikrishna Chakravarthi, Zirun Han, Gwangwoo Kim, Kyung Yeol Ma, Hyeon Suk Shin, Roy H. Olsson III, Deep Jariwala

Abstract: Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characte… ▽ More Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characteristics of a MoS$_{2}$ negative capacitance FET (NCFET) based on an AlScN ferroelectric material. We experimentally demonstrate the effect of a dielectric layer in the gate stack on the memory window and subthreshold swing (SS) of the NCFET. We show that the hysteresis behavior of transfer characteristics in the NCFET can be minimized with the inclusion of a non-ferroelectric dielectric layer, which fulfills the capacitance-matching condition. Remarkably, we also observe the NC effect in MoS$_{2}$/AlScN NCFETs arrays based on large-area monolayer MoS$_{2}$ synthesized by chemical vapor deposition, showing the SS values smaller than its thermionic limit (~36-60 mV/dec) and minimal variation in threshold voltages (< 20 mV). △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: MS + SI

Wafer-scale growth of two-dimensional, phase-pure InSe

Authors: Seunguk Song, Sungho Jeon, Mahfujur Rahaman, Jason Lynch, Pawan Kumar, Srikrishna Chakravarthi, Gwangwoo Kim, Xingyu Du, Eric Blanton, Kim Kisslinger, Michael Snure, Nicholas R. Glavin, Eric A. Stach, Roy H. Olsson, Deep Jariwala

Abstract: Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the d… ▽ More Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers. We achieve thickness-controlled, layer-by-layer epitaxial growth of InSe on c-plane sapphire via dynamic pulse control of Se/In flux ratio. The layer-by-layer growth allows thickness control over wafer scale with tunable optical properties comparable to bulk crystals. Finally, the gate-tunable electrical transport suggests that MOCVD-grown InSe could be a potential channel material for back-end-of-line integration in logic transistors with field-effect mobility comparable to single-crystalline flakes. △ Less

Submitted 4 March, 2023; originally announced March 2023.

Comments: MS + SI

Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes

Authors: Xiwen Liu, John Ting, Yunfei He, Merrilyn Mercy Adzo Fiagbenu, Jeffrey Zheng, Dixiong Wang, Jonathan Frost, Pariasadat Musavigharavi, Giovanni Esteves, Kim Kisslinger, Surendra B. Anantharaman, Eric A. Stach, Roy H. Olsson III, Deep Jariwala

Abstract: The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing inn… ▽ More The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing innovations at the circuit and architecture level to enable compute in memory (CIM) operations. CIM architectures that combine data storage yet concurrently offer low-delay and small footprint are highly sought after but have not been realized. Here, we present Aluminum Scandium Nitride (AlScN) ferroelectric diode (FeD) memristor devices that allow for storage, search and neural network-based pattern recognition in a transistor-free architecture. Our devices can be directly integrated on top of Si processors in a scalable, back-end-of-line process. We leverage the field-programmability, non-volatility and non-linearity of FeDs to demonstrated circuit blocks that can support search operations in-situ memory with search delay times < 0.1 ns and a cell footprint < 0.12 um^2. In addition, we demonstrate matrix multiplication operations with 4-bit operation of the FeDs. Our results highlight FeDs as promising candidates for fast, efficient, and multifunctional CIM platforms. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Scalable CMOS-BEOL compatible AlScN/2D Channel FE-FETs

Authors: Kwan-Ho Kim, Seyong Oh, Merrilyn Mercy Adzo Fiagbenu, Jeffrey Zheng, Pariasadat Musavigharavi, Pawan Kumar, Nicholas Trainor, Areej Aljarb, Yi Wan, Hyong Min Kim, Keshava Katti, Zichen Tang, Vincent C. Tung, Joan Redwing, Eric A. Stach, Roy H. Olsson III, Deep Jariwala

Abstract: Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field… ▽ More Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field Effect Transistors (FE-FETs) are a promising candidate but their scalability and performance in a back-end-of-line (BEOL) process remain unattained. Here, we present scalable BEOL compatible FE-FETs using two-dimensional (2D) MoS2 channel and AlScN ferroelectric dielectric. We have fabricated a large array of FE-FETs with memory windows larger than 7.8 V, ON/OFF ratios of greater than 10^7, and ON current density greater than 250 uA/um, all at ~80 nm channel lengths. Our devices show stable retention up to 20000 secs and endurance up to 20000 cycles in addition to 4-bit pulse programmable memory features thereby opening a path towards scalable 3D hetero-integration of 2D semiconductor memory with Si CMOS logic. △ Less

Submitted 6 January, 2022; originally announced January 2022.

Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor

Authors: Xiwen Liu, Dixiong Wang, Jeffrey Zheng, Pariasadat Musavigharavi, **shui Miao, Eric A. Stach, Roy H. Olsson III, Deep Jariwala

Abstract: In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMO… ▽ More In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMOS) process integration. These difficulties led to the development of trapped-charge based memory devices (also called floating gate or flash memory), and these are now the mainstream non-volatile memory (NVM) technology. Over the past two decades, advances in oxide FE materials have rejuvenated the field of ferroelectrics and made FE random access memories (FE-RAM) a commercial reality. Despite these advances, commercial FE-RAM based on lead zirconium titanate (PZT) has stalled at the 130 nm due to process challenges.The recent discovery of scandium doped aluminum nitride (AlScN) as a CMOS compatible ferroelectric presents new opportunities for direct memory integration with logic transistors due to the low temperature of AlScN deposition (approx. 350 C). This temperature is compatible with CMOS back end of line processes. Here, we present a FE-FET device composed of an AlScN FE dielectric layer integrated with a channel layer of a van der Waals two-dimensional (2D) semiconductor, MoS2. Our devices show an ON/OFF ratio ~ 10^6, concurrent with a normalized memory window of 0.3 V/nm. The devices also demonstrate stable, two-state memory retention for up to 10^4 seconds. Our simulations and experimental results suggest that the combination of AlScN and 2D semiconductors is nearly ideal for low power FE-FET memory. These results demonstrate a new approach in embedded memory and in-memory computing, and could even lead to effective neuromorphic computing architectures. △ Less

Submitted 22 October, 2020; originally announced October 2020.

Physical Signal Classification Via Deep Neural Networks

Authors: Benjamin Epstein, Roy H. Olsson III

Abstract: A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic. A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic. △ Less

Submitted 15 November, 2018; originally announced November 2018.

Comments: 4 figures, 3 tables

Tailorable Stimulated Brillouin Scattering in Nanoscale Silicon Waveguides

Authors: Heedeuk Shin, Wenjun Qiu, Robert Jarecki, Jonathan A. Cox, Roy H. Olsson III, Andrew Starbuck, Zheng Wang, Peter T. Rakich

Abstract: While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic s… ▽ More While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic silicon waveguides for the first time, yielding 3000 times stronger forward SBS responses than any previous waveguide system. Simulations reveal that a coherent combination of electrostrictive forces and radiation pressures are responsible for greatly enhanced photon-phonon coupling at nano-scales. Highly tailorable Brillouin nonlinearities are produced by engineering the structure of a membrane-suspended waveguide to yield Brillouin resonances from 1 to 18 GHz through high quality-factor (>1000) phonon modes. Such wideband and tailorable stimulated Brillouin scattering in silicon photonics could enable practical realization of on-chip slow-light devices, RF-photonic filtering and sensing, and ultra-narrow-band laser sources by using standard semiconductor fabrication and CMOS technologies. △ Less

Submitted 30 January, 2013; originally announced January 2013.

Journal ref: Nature.Comm. 4 (2013) 1944