-
Periodically Poled Aluminum Scandium Nitride Bulk Acoustic Wave Resonators and Filters for Communications in the 6G Era
Authors:
Izhar,
M. M. A. Fiagbenu,
S. Yao,
X. Du,
P. Musavigharavi,
Y. Deng,
J. Leathersich,
C. Moe,
A. Kochhar,
E. A. Stach,
R. Vetury,
R. H. Olsson III
Abstract:
Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of re…
▽ More
Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of resonator devices formed in traditional uniform polarization piezoelectric films of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) decrease when scaled beyond 8 GHz. In this work, we utilized 4-layer AlScN periodically poled piezoelectric films (P3F) to construct high frequency (~17-18 GHz) resonators and filters. The resonator performance is studied over a range of device geometries, with the best resonator achieving a k_t^2 of 11.8% and a Q_p of 236.6 at the parallel resonance frequency (fp) of 17.9 GHz. These resulting figures of merit are ((FoM)_1=(k_t^2 Q)_p and (FoM_2=f_p(FoM)_1x10^-9) ) 27.9 and 500 respectively. These and the k_t^2 are significantly higher than previously reported An/AlScN-based resonators operating at similar frequencies. Fabricated 3-element and 6-element filters formed from these resonators demonstrated low insertion losses (IL) of 1.86 dB and 3.25 dB, and -3 dB bandwidths (BW) of 680 MHz (fractional BW of 3.9%) and 590 MHz (fractional BW of 3.3%) at ~17.4 GHz center frequency. The 3-element and 6-element filters achieved excellent linearity with in-band input third-order intercept point (IIP3) values of +36 dBm and +40 dBm, respectively, which are significantly higher than previously reported acoustic filters operating at similar frequencies.
△ Less
Submitted 24 May, 2024;
originally announced June 2024.
-
High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities
Authors:
Seunguk Song,
Kwan-Ho Kim,
Rachael Keneipp,
Nicholas Trainor,
Chen Chen,
Jeffrey Zheng,
Joan M. Redwing,
Marija Drndić,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistan…
▽ More
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
CMOS-Compatible, AlScN-Based Integrated Electro-Optic Modulator
Authors:
Valerie Yoshioka,
Jicheng **,
Haiqi Zhou,
Zichen Tang,
Roy H. Olsson III,
Bo Zhen
Abstract:
Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indica…
▽ More
Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indicating the possibility for efficient modulation. Here, we measure the electro-optic effect in AlScN-based modulators, demonstrating $V_πL$ around 750 V$\cdot$cm. Since the electro-optic response is smaller than expected, we discuss potential causes for the reduced response and future outlook for AlScN-based photonics.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Materials for High Temperature Digital Electronics
Authors:
Dhiren K. Pradhan,
David C. Moore,
A. Matt Francis,
Jacob Kupernik,
W. Joshua Kennedy,
Nicholas R. Glavin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of s…
▽ More
Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of space exploration, geothermal energy harvesting, nuclear energy, unmanned avionic systems, and autonomous driving will rely on control systems, sensors, and communication devices which operate at temperatures as high as 500 °C and beyond. At these extreme temperatures, active (heat exchanger, phase change cooling) or passive (fins and thermal interface materials) cooling strategies add significant mass and complication which is often infeasible. Thus, new material solutions beyond conventional silicon CMOS devices are necessary for high temperature, resilient electronic systems. Accomplishing this will require a united effort to explore development, integration, and ultimately manufacturing of non-silicon-based logic and memory technologies, non-traditional metals for interconnects, and ceramic packaging technology.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes
Authors:
Kwan-Ho Kim,
Zirun Han,
Yinuo Zhang,
Pariasadat Musavigharavi,
Jeffrey Zheng,
Dhiren K. Pradhan,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherent…
▽ More
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherently selector-free nature, facilitating high-density crossbar arrays. Here, we demonstrate BEOL-compatible, high-performance FE-diodes scaled to 5, 10, and 20 nm FE Al0.72Sc0.28N/Al0.64Sc0.36N films. Through interlayer (IL) engineering, we show substantial improvements in the ON/OFF ratios (>166 times) and rectification ratios (>176 times) in these scaled devices. The superlative characteristics also enables 5-bit multi-state operation with a stable retention. We also experimentally and theoretically demonstrate the counterintuitive result that the inclusion of an IL can lead to a decrease in the ferroelectric switching voltage of the device. An in-depth analysis into the device transport mechanisms is performed, and our compact model aligns seamlessly with the experimental results. Our results suggest the possibility of using scaled AlxSc1-xN FE-diodes for high performance, low-power, embedded NVM.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Organic electrochemical neurons and synapses with ion mediated spiking
Authors:
H. Padinhare,
C. Yang,
D. Tu,
J. Gerasimov,
A. M. M. Dar,
A. A. Moreira,
M. Massetti,
R. Kroon,
D. Bliman,
R. Olsson,
E. Stavrinidou,
M. Berggren,
S. Fabiano
Abstract:
Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio…
▽ More
Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio-integration potential. Here, we report the first organic electrochemical neurons (OECNs) with ion-modulated spiking, based on allprinted complementary organic electrochemical transistors. We demonstrate facile biointegration of OECNs with Venus Flytrap (Dionaea muscipula) to induce lobe closure upon input stimuli. The OECNs can also be integrated with all-printed organic electrochemical synapses (OECSs), exhibiting short-term plasticity with paired-pulse facilitation and longterm plasticity with retention >1000 s, facilitating Hebbian learning. These soft and flexible OECNs operate below 0.6 V and respond to multiple stimuli, defining a new vista for localized artificial neuronal systems possible to integrate with bio-signaling systems of plants, invertebrates, and vertebrates.
△ Less
Submitted 18 January, 2024;
originally announced March 2024.
-
Wideband, Efficient AlScN-Si Acousto-Optic Modulator in a Commercially Available Silicon Photonics Process
Authors:
Mertcan Erdil,
Izhar,
Yang Deng,
Zichen Tang,
Mohamad Hossein Idjadi,
Farshid Ashtiani,
Firooz Aflatouni,
Roy Olsson III
Abstract:
Acousto-optic integration offers numerous applications including low-loss microwave signal processing, nonreciprocal light propagation, frequency comb generation, and broadband acousto-optic modulation. State-of-the-art acousto-optic systems are mainly implemented entirely using in-house fabrication processes, which despite excellent performance typically suffer from low yield and are not compatib…
▽ More
Acousto-optic integration offers numerous applications including low-loss microwave signal processing, nonreciprocal light propagation, frequency comb generation, and broadband acousto-optic modulation. State-of-the-art acousto-optic systems are mainly implemented entirely using in-house fabrication processes, which despite excellent performance typically suffer from low yield and are not compatible with mass production through foundry processes. Here, we demonstrate a highly efficient wideband acousto-optic modulator (AOM) implemented on a silicon photonics foundry process enabling high-yield low-cost mass production of AOMs with other photonic and electronic devices on the same substrate. In the reported structure, a 150 $μ$m long AlScN-based acoustic transducer launches surface acoustic waves (SAW), which modulate the light passing through a silicon optical waveguide. A modulation efficiency of -18.3 dB over a bandwidth of 112 MHz is achieved, which to our knowledge is the highest reported efficiency and bandwidth combination among silicon based AOMs, resulting in about an order of magnitude $BW(V_πL)^{-1}$ figure-of-merit improvement compared to the state-of-the-art CMOS compatible AOMs. The monolithically integrated acousto-optic platform developed in this work will pave the way for low-cost, miniature microwave filters, true time delays, frequency combs, and other signal processors with the advanced functionality offered by foundry-integrated photonic circuits.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Rational Materials Design for In Operando Electropolymerization of Evolvable Organic Electrochemical Transistors
Authors:
J. Y. Gerasimov,
A. Halder,
A. H. Mousa,
S. Ghosh,
P. C. Harikesh,
T. Abrahamsson,
D. Bliman,
J. Strandberg,
M. Massetti,
I. Zozoulenko,
D. T. Simon,
M. Berggren,
R. Olsson,
S. Fabiano
Abstract:
Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The…
▽ More
Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The nature of the interface between the substrate and various monomer precursors of conducting polymers through molecular dynamics simulations is investigated, showing that monomer adsorption to the substrate produces an increase in the effective monomer concentration at the surface. By evaluating combinatorial couples of monomers baring various sidechains with differently functionalized substrates, it is shown that the interactions between the substrate and the monomer precursor control the lateral growth of a polymer film along an inert substrate. This effect has implications for fabricating synaptic systems on inexpensive, flexible substrates.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC
Authors:
Xingyu Du,
Nishant Sharma,
Zichen Tang,
Chloe Leblanc,
Deep Jariwala,
Roy H. Olsson III
Abstract:
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin fi…
▽ More
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin films on SiC substrates, utilizing the second SAW mode (referred to as the Sezawa mode). The resonators achieve remarkable performance, boasting a K2 value of 5.5% and a maximum Q-factor (Qmax) of 1048 at 4.7 GHz, outperforming previous benchmarks. Additionally, a SAW resonator with a 960 nm wavelength attains 5.9 GHz frequency with record K2 (4.0%) and Qmax (887). Our study underscores the potential of the AlScN on SiC platform for advanced radio-frequency applications.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures
Authors:
Simrjit Singh,
Kwan-Ho Kim,
Kiyoung Jo,
Pariasadat Musavigharavi,
Bumho Kim,
Jeffrey Zheng,
Nicholas Trainor,
Chen Chen,
Joan M. Redwing,
Eric A Stach,
Roy H Olsson III,
Deep Jariwala
Abstract:
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff…
▽ More
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
S-band acoustoelectric amplifier utilizing an ultra-high thermal conductivity heterostructure for low self-heating
Authors:
Lisa Hackett,
Xingyu Du,
Michael Miller,
Brandon Smith,
Steven Santillan,
Josh Montoya,
Robert Reyna,
Shawn Arterburn,
Scott Weatherrend,
Thomas A. Friedmann,
Roy H. Olsson III,
Matt Eichenfield
Abstract:
Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron…
▽ More
Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron thick) piezoelectric film to be deposited on a thermally conductive bulk substrate (370 W/m-K for 4H-SiC), enabling negligible self-heating when combined with the In$_{0.53}$Ga$_{0.47}$As semiconductor parameters of large mobility (~7000 cm$^2$/V-s) and low concentration of charge carriers (~5x10$^{15}$ cm$^{-3}$). A Sezawa mode with optimal overlap between the peak of its evanescent electric field and the semiconductor charge carriers is supported. The high velocity of the heterostructure materials allows us to operate the Sezawa mode amplifier at 3.05 GHz, demonstrating a gain of 500 dB/cm (40 dB in 800 microns). Additionally, a terminal end-to-end radio frequency gain of 7.7 dB and a nonreciprocal transmission of 52.6 dB are achieved with a dissipated DC power of 2.3 mW. The power added efficiency and acoustic noise figure are also characterized.
△ Less
Submitted 28 September, 2023; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Scalable and Stable Ferroelectric Non-Volatile Memory at > 500 $^\circ$C
Authors:
Dhiren K. Pradhan,
David C. Moore,
Gwangwoo Kim,
Yunfei He,
Pariasadat Musavigharavi,
Kwan-Ho Kim,
Nishant Sharma,
Zirun Han,
Xingyu Du,
Venkata S. Puli,
Eric A. Stach,
W. Joshua Kennedy,
Nicholas R. Glavin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices ope…
▽ More
Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices operating at very high temperatures (> 500 $^\circ$C) given its stable and high remnant polarization (PR) above 100 $μ$C/cm$^2$ with demonstrated ferroelectric transition temperature (TC) > 1000 $^\circ$C. Here, we demonstrate an Al$_{0.68}$Sc$_{0.32}$N ferroelectric diode based NVM device that can reliably operate with clear ferroelectric switching up to 600 $^\circ$C with distinguishable On and Off states. The coercive field (EC) from the Pulsed I-V measurements is found to be -5.84 (EC-) and +5.98 (EC+) (+/- 0.1) MV/cm at room temperature (RT) and found to decrease with increasing temperature up to 600 $^\circ$C. The devices exhibit high remnant polarizations (> 100 $μ$C/cm$^2$) which are stable at high temperatures. At 500 $^\circ$C, our devices show 1 million read cycles and stable On-Off ratio above 1 for > 6 hours. Finally, the operating voltages of our AlScN ferrodiodes are < 15 V at 600 $^\circ$C which is well matched and compatible with Silicon Carbide (SiC) based high temperature logic technology, thereby making our demonstration a major step towards commercialization of NVM integrated high-T computers.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Frequency Tunable Magnetostatic Wave Filters With Zero Static Power Magnetic Biasing Circuitry
Authors:
Xingyu Du,
Mohamad Hossein Idjadi,
Yixiao Ding,
Tao Zhang,
Alexander J. Geers,
Shun Yao,
Jun Beom Pyo,
Firooz Aflatouni,
Mark Allen,
Roy H. Olsson III
Abstract:
A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsui…
▽ More
A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsuitable for consumer wireless applications. Here, we demonstrate miniature and high selectivity MSW tunable filters with zero static power consumption, occupying less than 2 cc. The center frequency is continuously tunable from 3.4 GHz to 11.1 GHz via current pulses of sub-millisecond duration applied to a small and nonvolatile magnetic bias assembly. This assembly is limited in the area over which it can achieve a large and uniform magnetic field, necessitating filters realized from small resonant cavities micromachined in thin films of Yttrium Iron Garnet. Filter insertion loss of 3.2 dB to 5.1 dB and out-of-band third order input intercept point greater than 41 dBm are achieved. The filter's broad frequency range, compact size, low insertion loss, high out-of-band linearity, and zero static power consumption are essential for protecting RF transceivers and antennas from interference, thus facilitating their use in mobile applications like IoT and 6G networks.
△ Less
Submitted 19 September, 2023; v1 submitted 1 August, 2023;
originally announced August 2023.
-
MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors
Authors:
Seunguk Song,
Kwan-Ho Kim,
Srikrishna Chakravarthi,
Zirun Han,
Gwangwoo Kim,
Kyung Yeol Ma,
Hyeon Suk Shin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characte…
▽ More
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characteristics of a MoS$_{2}$ negative capacitance FET (NCFET) based on an AlScN ferroelectric material. We experimentally demonstrate the effect of a dielectric layer in the gate stack on the memory window and subthreshold swing (SS) of the NCFET. We show that the hysteresis behavior of transfer characteristics in the NCFET can be minimized with the inclusion of a non-ferroelectric dielectric layer, which fulfills the capacitance-matching condition. Remarkably, we also observe the NC effect in MoS$_{2}$/AlScN NCFETs arrays based on large-area monolayer MoS$_{2}$ synthesized by chemical vapor deposition, showing the SS values smaller than its thermionic limit (~36-60 mV/dec) and minimal variation in threshold voltages (< 20 mV).
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
Wafer-scale growth of two-dimensional, phase-pure InSe
Authors:
Seunguk Song,
Sungho Jeon,
Mahfujur Rahaman,
Jason Lynch,
Pawan Kumar,
Srikrishna Chakravarthi,
Gwangwoo Kim,
Xingyu Du,
Eric Blanton,
Kim Kisslinger,
Michael Snure,
Nicholas R. Glavin,
Eric A. Stach,
Roy H. Olsson,
Deep Jariwala
Abstract:
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the d…
▽ More
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers. We achieve thickness-controlled, layer-by-layer epitaxial growth of InSe on c-plane sapphire via dynamic pulse control of Se/In flux ratio. The layer-by-layer growth allows thickness control over wafer scale with tunable optical properties comparable to bulk crystals. Finally, the gate-tunable electrical transport suggests that MOCVD-grown InSe could be a potential channel material for back-end-of-line integration in logic transistors with field-effect mobility comparable to single-crystalline flakes.
△ Less
Submitted 4 March, 2023;
originally announced March 2023.
-
Automatic Synthesis of Neurons for Recurrent Neural Nets
Authors:
Roland Olsson,
Chau Tran,
Lars Magnusson
Abstract:
We present a new class of neurons, ARNs, which give a cross entropy on test data that is up to three times lower than the one achieved by carefully optimized LSTM neurons. The explanations for the huge improvements that often are achieved are elaborate skip connections through time, up to four internal memory states per neuron and a number of novel activation functions including small quadratic fo…
▽ More
We present a new class of neurons, ARNs, which give a cross entropy on test data that is up to three times lower than the one achieved by carefully optimized LSTM neurons. The explanations for the huge improvements that often are achieved are elaborate skip connections through time, up to four internal memory states per neuron and a number of novel activation functions including small quadratic forms. The new neurons were generated using automatic programming and are formulated as pure functional programs that easily can be transformed. We present experimental results for eight datasets and found excellent improvements for seven of them, but LSTM remained the best for one dataset. The results are so promising that automatic programming to generate new neurons should become part of the standard operating procedure for any machine learning practitioner who works on time series data such as sensor signals.
△ Less
Submitted 29 June, 2022;
originally announced July 2022.
-
Bandwidth-Scalable Fully Mask-Based Deep FCRN Acoustic Echo Cancellation and Postfiltering
Authors:
Ernst Seidel,
Rasmus Kongsgaard Olsson,
Karim Haddad,
Zhengyang Li,
Pejman Mowlaee,
Tim Fingscheidt
Abstract:
Although today's speech communication systems support various bandwidths from narrowband to super-wideband and beyond, state-of-the art DNN methods for acoustic echo cancellation (AEC) are lacking modularity and bandwidth scalability. Our proposed DNN model builds upon a fully convolutional recurrent network (FCRN) and introduces scalability over various bandwidths up to a fullband (FB) system (48…
▽ More
Although today's speech communication systems support various bandwidths from narrowband to super-wideband and beyond, state-of-the art DNN methods for acoustic echo cancellation (AEC) are lacking modularity and bandwidth scalability. Our proposed DNN model builds upon a fully convolutional recurrent network (FCRN) and introduces scalability over various bandwidths up to a fullband (FB) system (48 kHz sampling rate). This modular approach allows joint wideband (WB) pre-training of mask-based AEC and postfilter stages with dedicated losses, followed by a separate training of them on FB data. A third lightweight blind bandwidth extension stage is separately trained on FB data, flexibly allowing to extend the WB postfilter output towards higher bandwidths until reaching FB. Thereby, higher frequency noise and echo are reliably suppressed. On the ICASSP 2022 Acoustic Echo Cancellation Challenge blind test set we report a competitive performance, showing robustness even under highly delayed echo and dynamic echo path changes.
△ Less
Submitted 7 November, 2022; v1 submitted 9 May, 2022;
originally announced May 2022.
-
Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes
Authors:
Xiwen Liu,
John Ting,
Yunfei He,
Merrilyn Mercy Adzo Fiagbenu,
Jeffrey Zheng,
Dixiong Wang,
Jonathan Frost,
Pariasadat Musavigharavi,
Giovanni Esteves,
Kim Kisslinger,
Surendra B. Anantharaman,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing inn…
▽ More
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing innovations at the circuit and architecture level to enable compute in memory (CIM) operations. CIM architectures that combine data storage yet concurrently offer low-delay and small footprint are highly sought after but have not been realized. Here, we present Aluminum Scandium Nitride (AlScN) ferroelectric diode (FeD) memristor devices that allow for storage, search and neural network-based pattern recognition in a transistor-free architecture. Our devices can be directly integrated on top of Si processors in a scalable, back-end-of-line process. We leverage the field-programmability, non-volatility and non-linearity of FeDs to demonstrated circuit blocks that can support search operations in-situ memory with search delay times < 0.1 ns and a cell footprint < 0.12 um^2. In addition, we demonstrate matrix multiplication operations with 4-bit operation of the FeDs. Our results highlight FeDs as promising candidates for fast, efficient, and multifunctional CIM platforms.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Scalable CMOS-BEOL compatible AlScN/2D Channel FE-FETs
Authors:
Kwan-Ho Kim,
Seyong Oh,
Merrilyn Mercy Adzo Fiagbenu,
Jeffrey Zheng,
Pariasadat Musavigharavi,
Pawan Kumar,
Nicholas Trainor,
Areej Aljarb,
Yi Wan,
Hyong Min Kim,
Keshava Katti,
Zichen Tang,
Vincent C. Tung,
Joan Redwing,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field…
▽ More
Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field Effect Transistors (FE-FETs) are a promising candidate but their scalability and performance in a back-end-of-line (BEOL) process remain unattained. Here, we present scalable BEOL compatible FE-FETs using two-dimensional (2D) MoS2 channel and AlScN ferroelectric dielectric. We have fabricated a large array of FE-FETs with memory windows larger than 7.8 V, ON/OFF ratios of greater than 10^7, and ON current density greater than 250 uA/um, all at ~80 nm channel lengths. Our devices show stable retention up to 20000 secs and endurance up to 20000 cycles in addition to 4-bit pulse programmable memory features thereby opening a path towards scalable 3D hetero-integration of 2D semiconductor memory with Si CMOS logic.
△ Less
Submitted 6 January, 2022;
originally announced January 2022.
-
Study of energy response and resolution of the ATLAS Tile Calorimeter to hadrons of energies from 16 to 30 GeV
Authors:
Jalal Abdallah,
Stylianos Angelidakis,
Giorgi Arabidze,
Nikolay Atanov,
Johannes Bernhard,
Romeo Bonnefoy,
Jonathan Bossio,
Ryan Bouabid,
Fernando Carrio,
Tomas Davidek,
Michal Dubovsky,
Luca Fiorini,
Francisco Brandan Garcia Aparisi,
Tancredi Carli,
Alexander Gerbershagen,
Hazal Goksu,
Haleh Hadavand,
Siarhei Harkusha,
Dingane Hlaluku,
Michael James Hibbard,
Kevin Hildebrand,
Juansher Jejelava,
Andrey Kamenshchikov,
Stergios Kazakos,
Tomas Kello
, et al. (46 additional authors not shown)
Abstract:
Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant…
▽ More
Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The measurements of the energy response and resolution of the detector to positive pions and kaons and protons with energy in the range 16 to 30 GeV are reported. The results have uncertainties of few percent. They were compared to the predictions of the Geant4-based simulation program used in ATLAS to estimate the response of the detector to proton-proton events at Large Hadron Collider. The determinations obtained using experimental and simulated data agree within the uncertainties.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
A CMOS Compatible Aluminum Scandium Nitride-based Ferroelectric Tunnel Junction Memristor
Authors:
Xiwen Liu,
Jeffrey Zheng,
Dixiong Wang,
Pariasadat Musavigharavi,
Eric A. Stach,
Roy Olsson III,
Deep Jariwala
Abstract:
We report a complementary metal oxide semiconductor (CMOS) technology compatible ferroelectric tunnel junction memristor grown directly on top of a Silicon substrate using a scandium doped aluminum nitride as the ferroelectric layer.
We report a complementary metal oxide semiconductor (CMOS) technology compatible ferroelectric tunnel junction memristor grown directly on top of a Silicon substrate using a scandium doped aluminum nitride as the ferroelectric layer.
△ Less
Submitted 5 January, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor
Authors:
Xiwen Liu,
Dixiong Wang,
Jeffrey Zheng,
Pariasadat Musavigharavi,
**shui Miao,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMO…
▽ More
In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMOS) process integration. These difficulties led to the development of trapped-charge based memory devices (also called floating gate or flash memory), and these are now the mainstream non-volatile memory (NVM) technology. Over the past two decades, advances in oxide FE materials have rejuvenated the field of ferroelectrics and made FE random access memories (FE-RAM) a commercial reality. Despite these advances, commercial FE-RAM based on lead zirconium titanate (PZT) has stalled at the 130 nm due to process challenges.The recent discovery of scandium doped aluminum nitride (AlScN) as a CMOS compatible ferroelectric presents new opportunities for direct memory integration with logic transistors due to the low temperature of AlScN deposition (approx. 350 C). This temperature is compatible with CMOS back end of line processes. Here, we present a FE-FET device composed of an AlScN FE dielectric layer integrated with a channel layer of a van der Waals two-dimensional (2D) semiconductor, MoS2. Our devices show an ON/OFF ratio ~ 10^6, concurrent with a normalized memory window of 0.3 V/nm. The devices also demonstrate stable, two-state memory retention for up to 10^4 seconds. Our simulations and experimental results suggest that the combination of AlScN and 2D semiconductors is nearly ideal for low power FE-FET memory. These results demonstrate a new approach in embedded memory and in-memory computing, and could even lead to effective neuromorphic computing architectures.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Physical Signal Classification Via Deep Neural Networks
Authors:
Benjamin Epstein,
Roy H. Olsson III
Abstract:
A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic.
A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic.
△ Less
Submitted 15 November, 2018;
originally announced November 2018.
-
Graph of Virtual Actors (GOVA): a Big Data Analytics Architecture for IoT
Authors:
The-Hien Dang-Ha,
Davide Roverso,
Roland Olsson
Abstract:
With the emergence of cloud computing and sensor technologies, Big Data analytics for the Internet of Things (IoT) has become the main force behind many innovative solutions for our society's problems. This paper provides practical explanations for the question "why is the number of Big Data applications that succeed and have an effect on our daily life so limited, compared with all of the solutio…
▽ More
With the emergence of cloud computing and sensor technologies, Big Data analytics for the Internet of Things (IoT) has become the main force behind many innovative solutions for our society's problems. This paper provides practical explanations for the question "why is the number of Big Data applications that succeed and have an effect on our daily life so limited, compared with all of the solutions proposed and tested in the literature?", with examples taken from Smart Grids. We argue that "noninvariants" are the most challenging issues in IoT applications, which can be easily revealed if we use the term "invariant" to replace the more common terms such as "information", "knowledge", or "insight" in any Big Data for IoT research. From our experience with develo** Smart Grid applications, we produced a list of "noninvariants", which we believe to be the main causes of the gaps between Big Data in a laboratory and in practice in IoT applications. This paper also proposes Graph of Virtual Actors (GOVA) as a Big Data analytics architecture for IoT applications, which not only can solve the noninvariants issues, but can also quickly scale horizontally in terms of computation, data storage, caching requirements, and programmability of the system.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Clustering Methods for Electricity Consumers: An Empirical Study in Hvaler-Norway
Authors:
The-Hien Dang-Ha,
Roland Olsson,
Hao Wang
Abstract:
The development of Smart Grid in Norway in specific and Europe/US in general will shortly lead to the availability of massive amount of fine-grained spatio-temporal consumption data from domestic households. This enables the application of data mining techniques for traditional problems in power system. Clustering customers into appropriate groups is extremely useful for operators or retailers to…
▽ More
The development of Smart Grid in Norway in specific and Europe/US in general will shortly lead to the availability of massive amount of fine-grained spatio-temporal consumption data from domestic households. This enables the application of data mining techniques for traditional problems in power system. Clustering customers into appropriate groups is extremely useful for operators or retailers to address each group differently through dedicated tariffs or customer-tailored services. Currently, the task is done based on demographic data collected through questionnaire, which is error-prone. In this paper, we used three different clustering techniques (together with their variants) to automatically segment electricity consumers based on their consumption patterns. We also proposed a good way to extract consumption patterns for each consumer. The grou** results were assessed using four common internal validity indexes. We found that the combination of Self Organizing Map (SOM) and k-means algorithms produce the most insightful and useful grou**. We also discovered that grou** quality cannot be measured effectively by automatic indicators, which goes against common suggestions in literature.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
The Role of Big Data on Smart Grid Transition
Authors:
The-Hien Dang-Ha,
Roland Olsson,
Hao Wang
Abstract:
Despite being popularly referred to as the ultimate solution for all problems of our current electric power system, smart grid is still a growing and unstable concept. It is usually considered as a set of advanced features powered by promising technological solutions. In this paper, we describe smart grid as a socio-technical transition and illustrate the evolutionary path on which a smart grid ca…
▽ More
Despite being popularly referred to as the ultimate solution for all problems of our current electric power system, smart grid is still a growing and unstable concept. It is usually considered as a set of advanced features powered by promising technological solutions. In this paper, we describe smart grid as a socio-technical transition and illustrate the evolutionary path on which a smart grid can be realized. Through this conceptual lens, we reveal the role of big data, and how it can fuel the organic growth of smart grid. We also provide a rough estimate of how much data will be potentially generated from different data sources, which helps clarify the big data challenges during the evolutionary process.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Local Short Term Electricity Load Forecasting: Automatic Approaches
Authors:
The-Hien Dang-Ha,
Filippo Maria Bianchi,
Roland Olsson
Abstract:
Short-Term Load Forecasting (STLF) is a fundamental component in the efficient management of power systems, which has been studied intensively over the past 50 years. The emerging development of smart grid technologies is posing new challenges as well as opportunities to STLF. Load data, collected at higher geographical granularity and frequency through thousands of smart meters, allows us to buil…
▽ More
Short-Term Load Forecasting (STLF) is a fundamental component in the efficient management of power systems, which has been studied intensively over the past 50 years. The emerging development of smart grid technologies is posing new challenges as well as opportunities to STLF. Load data, collected at higher geographical granularity and frequency through thousands of smart meters, allows us to build a more accurate local load forecasting model, which is essential for local optimization of power load through demand side management. With this paper, we show how several existing approaches for STLF are not applicable on local load forecasting, either because of long training time, unstable optimization process, or sensitivity to hyper-parameters. Accordingly, we select five models suitable for local STFL, which can be trained on different time-series with limited intervention from the user. The experiment, which consists of 40 time-series collected at different locations and aggregation levels, revealed that yearly pattern and temperature information are only useful for high aggregation level STLF. On local STLF task, the modified version of double seasonal Holt-Winter proposed in this paper performs relatively well with only 3 months of training data, compared to more complex methods.
△ Less
Submitted 26 February, 2017;
originally announced February 2017.
-
Tailorable Stimulated Brillouin Scattering in Nanoscale Silicon Waveguides
Authors:
Heedeuk Shin,
Wenjun Qiu,
Robert Jarecki,
Jonathan A. Cox,
Roy H. Olsson III,
Andrew Starbuck,
Zheng Wang,
Peter T. Rakich
Abstract:
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic s…
▽ More
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic silicon waveguides for the first time, yielding 3000 times stronger forward SBS responses than any previous waveguide system. Simulations reveal that a coherent combination of electrostrictive forces and radiation pressures are responsible for greatly enhanced photon-phonon coupling at nano-scales. Highly tailorable Brillouin nonlinearities are produced by engineering the structure of a membrane-suspended waveguide to yield Brillouin resonances from 1 to 18 GHz through high quality-factor (>1000) phonon modes. Such wideband and tailorable stimulated Brillouin scattering in silicon photonics could enable practical realization of on-chip slow-light devices, RF-photonic filtering and sensing, and ultra-narrow-band laser sources by using standard semiconductor fabrication and CMOS technologies.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
-
Quantum teleportation between light and matter
Authors:
Jacob Sherson,
Hanna Krauter,
Rasmus K. Olsson,
Brian Julsgaard,
Klemens Hammerer,
Ignacio Cirac,
Eugene S. Polzik
Abstract:
Quantum teleportation is an important ingredient in distributed quantum networks, and can also serve as an elementary operation in quantum computers. Teleportation was first demonstrated as a transfer of a quantum state of light onto another light beam; later developments used optical relays and demonstrated entanglement swap** for continuous variables. The teleportation of a quantum state bet…
▽ More
Quantum teleportation is an important ingredient in distributed quantum networks, and can also serve as an elementary operation in quantum computers. Teleportation was first demonstrated as a transfer of a quantum state of light onto another light beam; later developments used optical relays and demonstrated entanglement swap** for continuous variables. The teleportation of a quantum state between two single material particles (trapped ions) has now also been achieved. Here we demonstrate teleportation between objects of a different nature - light and matter, which respectively represent 'flying' and 'stationary' media. A quantum state encoded in a light pulse is teleported onto a macroscopic object (an atomic ensemble containing 10^12 caesium atoms). Deterministic teleportation is achieved for sets of coherent states with mean photon number (n) up to a few hundred. The fidelities are 0.58+-0.02 for n=20 and 0.60+-0.02 for n=5 - higher than any classical state transfer can possibly achieve. Besides being of fundamental interest, teleportation using a macroscopic atomic ensemble is relevant for the practical implementation of a quantum repeater. An important factor for the implementation of quantum networks is the teleportation distance between transmitter and receiver; this is 0.5 metres in the present experiment. As our experiment uses propagating light to achieve the entanglement of light and atoms required for teleportation, the present approach should be scalable to longer distances.
△ Less
Submitted 23 October, 2006; v1 submitted 10 May, 2006;
originally announced May 2006.
-
Effect of High Energy Heavy Ion Irradiation on c-axis Oriented MgB2 Films
Authors:
R. J. Olsson,
W. K. Kwok,
G. Karapetrov,
M. Iavarone,
H. Claus,
C. Peterson,
G. W. Crabtree,
W. N. Kang,
H. J. Kim,
E. M. Choi,
Sung-Ik Lee
Abstract:
We report on the transport, magnetization, and scanning tunneling spectroscopy measurements on c-axis oriented thin films of MgB2 irradiated with high energy heavy ions of uranium and gold. We find a slight shift in the irreversibility and upper critical field lines to higher temperatures after irradiation. In addition, we observe an increase in the critical current at high temperatures near Tc2…
▽ More
We report on the transport, magnetization, and scanning tunneling spectroscopy measurements on c-axis oriented thin films of MgB2 irradiated with high energy heavy ions of uranium and gold. We find a slight shift in the irreversibility and upper critical field lines to higher temperatures after irradiation. In addition, we observe an increase in the critical current at high temperatures near Tc2 and only a small change at low temperatures. Furthermore, we find no evidence for the existence of anisotropic pinning induced by heavy ion irradiation in this material. Tunneling spectra in an irradiated sample show a double gap structure with a flat background and very low zero-bias conductance, behaving in much the same way as the pristine unirradiated sample.
△ Less
Submitted 2 January, 2002;
originally announced January 2002.