-
Periodically Poled Aluminum Scandium Nitride Bulk Acoustic Wave Resonators and Filters for Communications in the 6G Era
Authors:
Izhar,
M. M. A. Fiagbenu,
S. Yao,
X. Du,
P. Musavigharavi,
Y. Deng,
J. Leathersich,
C. Moe,
A. Kochhar,
E. A. Stach,
R. Vetury,
R. H. Olsson III
Abstract:
Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of re…
▽ More
Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (k_t^2) to form filters with low insertion loss and high selectivity. However, both the Q and k_t^2 of resonator devices formed in traditional uniform polarization piezoelectric films of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) decrease when scaled beyond 8 GHz. In this work, we utilized 4-layer AlScN periodically poled piezoelectric films (P3F) to construct high frequency (~17-18 GHz) resonators and filters. The resonator performance is studied over a range of device geometries, with the best resonator achieving a k_t^2 of 11.8% and a Q_p of 236.6 at the parallel resonance frequency (fp) of 17.9 GHz. These resulting figures of merit are ((FoM)_1=(k_t^2 Q)_p and (FoM_2=f_p(FoM)_1x10^-9) ) 27.9 and 500 respectively. These and the k_t^2 are significantly higher than previously reported An/AlScN-based resonators operating at similar frequencies. Fabricated 3-element and 6-element filters formed from these resonators demonstrated low insertion losses (IL) of 1.86 dB and 3.25 dB, and -3 dB bandwidths (BW) of 680 MHz (fractional BW of 3.9%) and 590 MHz (fractional BW of 3.3%) at ~17.4 GHz center frequency. The 3-element and 6-element filters achieved excellent linearity with in-band input third-order intercept point (IIP3) values of +36 dBm and +40 dBm, respectively, which are significantly higher than previously reported acoustic filters operating at similar frequencies.
△ Less
Submitted 24 May, 2024;
originally announced June 2024.
-
High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities
Authors:
Seunguk Song,
Kwan-Ho Kim,
Rachael Keneipp,
Nicholas Trainor,
Chen Chen,
Jeffrey Zheng,
Joan M. Redwing,
Marija Drndić,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistan…
▽ More
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
CMOS-Compatible, AlScN-Based Integrated Electro-Optic Modulator
Authors:
Valerie Yoshioka,
Jicheng **,
Haiqi Zhou,
Zichen Tang,
Roy H. Olsson III,
Bo Zhen
Abstract:
Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indica…
▽ More
Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indicating the possibility for efficient modulation. Here, we measure the electro-optic effect in AlScN-based modulators, demonstrating $V_πL$ around 750 V$\cdot$cm. Since the electro-optic response is smaller than expected, we discuss potential causes for the reduced response and future outlook for AlScN-based photonics.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Materials for High Temperature Digital Electronics
Authors:
Dhiren K. Pradhan,
David C. Moore,
A. Matt Francis,
Jacob Kupernik,
W. Joshua Kennedy,
Nicholas R. Glavin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of s…
▽ More
Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 °C. The emergent technological frontiers of space exploration, geothermal energy harvesting, nuclear energy, unmanned avionic systems, and autonomous driving will rely on control systems, sensors, and communication devices which operate at temperatures as high as 500 °C and beyond. At these extreme temperatures, active (heat exchanger, phase change cooling) or passive (fins and thermal interface materials) cooling strategies add significant mass and complication which is often infeasible. Thus, new material solutions beyond conventional silicon CMOS devices are necessary for high temperature, resilient electronic systems. Accomplishing this will require a united effort to explore development, integration, and ultimately manufacturing of non-silicon-based logic and memory technologies, non-traditional metals for interconnects, and ceramic packaging technology.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes
Authors:
Kwan-Ho Kim,
Zirun Han,
Yinuo Zhang,
Pariasadat Musavigharavi,
Jeffrey Zheng,
Dhiren K. Pradhan,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherent…
▽ More
The growth in data generation necessitates efficient data processing technologies to address the von Neumann bottleneck in conventional computer architecture. Memory-driven computing, which integrates non-volatile memory (NVM) devices in a 3D stack, is gaining attention, with CMOS back-end-of-line (BEOL) compatible ferroelectric (FE) diodes being ideal due to their two-terminal design and inherently selector-free nature, facilitating high-density crossbar arrays. Here, we demonstrate BEOL-compatible, high-performance FE-diodes scaled to 5, 10, and 20 nm FE Al0.72Sc0.28N/Al0.64Sc0.36N films. Through interlayer (IL) engineering, we show substantial improvements in the ON/OFF ratios (>166 times) and rectification ratios (>176 times) in these scaled devices. The superlative characteristics also enables 5-bit multi-state operation with a stable retention. We also experimentally and theoretically demonstrate the counterintuitive result that the inclusion of an IL can lead to a decrease in the ferroelectric switching voltage of the device. An in-depth analysis into the device transport mechanisms is performed, and our compact model aligns seamlessly with the experimental results. Our results suggest the possibility of using scaled AlxSc1-xN FE-diodes for high performance, low-power, embedded NVM.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Choosing the Right Path for AI Integration in Engineering Companies: A Strategic Guide
Authors:
Rimma Dzhusupova,
Jan Bosch,
Helena Holmstrom Olsson
Abstract:
The Engineering, Procurement and Construction (EPC) businesses operating within the energy sector are recognizing the increasing importance of Artificial Intelligence (AI). Many EPC companies and their clients have realized the benefits of applying AI to their businesses in order to reduce manual work, drive productivity, and streamline future operations of engineered installations in a highly com…
▽ More
The Engineering, Procurement and Construction (EPC) businesses operating within the energy sector are recognizing the increasing importance of Artificial Intelligence (AI). Many EPC companies and their clients have realized the benefits of applying AI to their businesses in order to reduce manual work, drive productivity, and streamline future operations of engineered installations in a highly competitive industry. The current AI market offers various solutions and services to support this industry, but organizations must understand how to acquire AI technology in the most beneficial way based on their business strategy and available resources. This paper presents a framework for EPC companies in their transformation towards AI. Our work is based on examples of project execution of AI-based products development at one of the biggest EPC contractors worldwide and on insights from EPC vendor companies already integrating AI into their engineering solutions. The paper covers the entire life cycle of building AI solutions, from initial business understanding to deployment and further evolution. The framework identifies how various factors influence the choice of approach toward AI project development within large international engineering corporations. By presenting a practical guide for optimal approach selection, this paper contributes to the research in AI project management and organizational strategies for integrating AI technology into businesses. The framework might also help engineering companies choose the optimum AI approach to create business value.
△ Less
Submitted 25 December, 2023;
originally announced February 2024.
-
Near 6 GHz Sezawa Mode Surface Acoustic Wave Resonators using AlScN on SiC
Authors:
Xingyu Du,
Nishant Sharma,
Zichen Tang,
Chloe Leblanc,
Deep Jariwala,
Roy H. Olsson III
Abstract:
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin fi…
▽ More
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin films on SiC substrates, utilizing the second SAW mode (referred to as the Sezawa mode). The resonators achieve remarkable performance, boasting a K2 value of 5.5% and a maximum Q-factor (Qmax) of 1048 at 4.7 GHz, outperforming previous benchmarks. Additionally, a SAW resonator with a 960 nm wavelength attains 5.9 GHz frequency with record K2 (4.0%) and Qmax (887). Our study underscores the potential of the AlScN on SiC platform for advanced radio-frequency applications.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Non-Volatile Control of Valley Polarized Emission in 2D WSe2-AlScN Heterostructures
Authors:
Simrjit Singh,
Kwan-Ho Kim,
Kiyoung Jo,
Pariasadat Musavigharavi,
Bumho Kim,
Jeffrey Zheng,
Nicholas Trainor,
Chen Chen,
Joan M. Redwing,
Eric A Stach,
Roy H Olsson III,
Deep Jariwala
Abstract:
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-eff…
▽ More
Achieving robust and electrically controlled valley polarization in monolayer transition metal dichalcogenides (ML-TMDs) is a frontier challenge for realistic valleytronic applications. Theoretical investigations show that integration of 2D materials with ferroelectrics is a promising strategy; however, its experimental demonstration has remained elusive. Here, we fabricate ferroelectric field-effect transistors using a ML-WSe2 channel and a AlScN ferroelectric dielectric, and experimentally demonstrate efficient tuning as well as non-volatile control of valley polarization. We measured a large array of transistors and obtained a maximum valley polarization of ~27% at 80 K with stable retention up to 5400 secs. The enhancement in the valley polarization was ascribed to the efficient exciton-to-trion (X-T) conversion and its coupling with an out-of-plane electric field, viz. the quantum-confined Stark effect. This changes the valley depolarization pathway from strong exchange interactions to slow spin-flip intervalley scattering. Our research demonstrates a promising approach for achieving non-volatile control over valley polarization and suggests new design principles for practical valleytronic devices.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
S-band acoustoelectric amplifier utilizing an ultra-high thermal conductivity heterostructure for low self-heating
Authors:
Lisa Hackett,
Xingyu Du,
Michael Miller,
Brandon Smith,
Steven Santillan,
Josh Montoya,
Robert Reyna,
Shawn Arterburn,
Scott Weatherrend,
Thomas A. Friedmann,
Roy H. Olsson III,
Matt Eichenfield
Abstract:
Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron…
▽ More
Here we report on an acoustoelectric slab waveguide heterostructure for phonon amplification using a thin Al$_{0.58}$Sc$_{0.42}$N film grown directly on a 4H-SiC substrate with an ultra-thin In$_{0.53}$Ga$_{0.47}$As epitaxial film heterogeneously integrated onto the surface of the Al$_{0.58}$Sc$_{0.42}$N. The aluminum scandium nitride film grown directly on silicon carbide enables a thin (1 micron thick) piezoelectric film to be deposited on a thermally conductive bulk substrate (370 W/m-K for 4H-SiC), enabling negligible self-heating when combined with the In$_{0.53}$Ga$_{0.47}$As semiconductor parameters of large mobility (~7000 cm$^2$/V-s) and low concentration of charge carriers (~5x10$^{15}$ cm$^{-3}$). A Sezawa mode with optimal overlap between the peak of its evanescent electric field and the semiconductor charge carriers is supported. The high velocity of the heterostructure materials allows us to operate the Sezawa mode amplifier at 3.05 GHz, demonstrating a gain of 500 dB/cm (40 dB in 800 microns). Additionally, a terminal end-to-end radio frequency gain of 7.7 dB and a nonreciprocal transmission of 52.6 dB are achieved with a dissipated DC power of 2.3 mW. The power added efficiency and acoustic noise figure are also characterized.
△ Less
Submitted 28 September, 2023; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Scalable and Stable Ferroelectric Non-Volatile Memory at > 500 $^\circ$C
Authors:
Dhiren K. Pradhan,
David C. Moore,
Gwangwoo Kim,
Yunfei He,
Pariasadat Musavigharavi,
Kwan-Ho Kim,
Nishant Sharma,
Zirun Han,
Xingyu Du,
Venkata S. Puli,
Eric A. Stach,
W. Joshua Kennedy,
Nicholas R. Glavin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices ope…
▽ More
Non-volatile memory (NVM) devices that reliably operate at temperatures above 300 $^\circ$C are currently non-existent and remains a critically unmet challenge in the development of high-temperature (T) resilient electronics, necessary for many emerging, complex computing and sensing in harsh environments. Ferroelectric Al$_x$Sc$_{1-x}$N exhibits strong potential for utilization in NVM devices operating at very high temperatures (> 500 $^\circ$C) given its stable and high remnant polarization (PR) above 100 $μ$C/cm$^2$ with demonstrated ferroelectric transition temperature (TC) > 1000 $^\circ$C. Here, we demonstrate an Al$_{0.68}$Sc$_{0.32}$N ferroelectric diode based NVM device that can reliably operate with clear ferroelectric switching up to 600 $^\circ$C with distinguishable On and Off states. The coercive field (EC) from the Pulsed I-V measurements is found to be -5.84 (EC-) and +5.98 (EC+) (+/- 0.1) MV/cm at room temperature (RT) and found to decrease with increasing temperature up to 600 $^\circ$C. The devices exhibit high remnant polarizations (> 100 $μ$C/cm$^2$) which are stable at high temperatures. At 500 $^\circ$C, our devices show 1 million read cycles and stable On-Off ratio above 1 for > 6 hours. Finally, the operating voltages of our AlScN ferrodiodes are < 15 V at 600 $^\circ$C which is well matched and compatible with Silicon Carbide (SiC) based high temperature logic technology, thereby making our demonstration a major step towards commercialization of NVM integrated high-T computers.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
EdgeFL: A Lightweight Decentralized Federated Learning Framework
Authors:
Hongyi Zhang,
Jan Bosch,
Helena Holmström Olsson
Abstract:
Federated Learning (FL) has emerged as a promising approach for collaborative machine learning, addressing data privacy concerns. However, existing FL platforms and frameworks often present challenges for software engineers in terms of complexity, limited customization options, and scalability limitations. In this paper, we introduce EdgeFL, an edge-only lightweight decentralized FL framework, des…
▽ More
Federated Learning (FL) has emerged as a promising approach for collaborative machine learning, addressing data privacy concerns. However, existing FL platforms and frameworks often present challenges for software engineers in terms of complexity, limited customization options, and scalability limitations. In this paper, we introduce EdgeFL, an edge-only lightweight decentralized FL framework, designed to overcome the limitations of centralized aggregation and scalability in FL deployments. By adopting an edge-only model training and aggregation approach, EdgeFL eliminates the need for a central server, enabling seamless scalability across diverse use cases. With a straightforward integration process requiring just four lines of code (LOC), software engineers can easily incorporate FL functionalities into their AI products. Furthermore, EdgeFL offers the flexibility to customize aggregation functions, empowering engineers to adapt them to specific needs. Based on the results, we demonstrate that EdgeFL achieves superior performance compared to existing FL platforms/frameworks. Our results show that EdgeFL reduces weights update latency and enables faster model evolution, enhancing the efficiency of edge devices. Moreover, EdgeFL exhibits improved classification accuracy compared to traditional centralized FL approaches. By leveraging EdgeFL, software engineers can harness the benefits of federated learning while overcoming the challenges associated with existing FL platforms/frameworks.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Frequency Tunable Magnetostatic Wave Filters With Zero Static Power Magnetic Biasing Circuitry
Authors:
Xingyu Du,
Mohamad Hossein Idjadi,
Yixiao Ding,
Tao Zhang,
Alexander J. Geers,
Shun Yao,
Jun Beom Pyo,
Firooz Aflatouni,
Mark Allen,
Roy H. Olsson III
Abstract:
A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsui…
▽ More
A single tunable filter simplifies complexity, reduces insertion loss, and minimizes size compared to frequency switchable filter banks commonly used for radio frequency (RF) band selection. Magnetostatic wave (MSW) filters stand out for their wide, continuous frequency tuning and high-quality factor. However, MSW filters employing electromagnets for tuning consume excessive power and space, unsuitable for consumer wireless applications. Here, we demonstrate miniature and high selectivity MSW tunable filters with zero static power consumption, occupying less than 2 cc. The center frequency is continuously tunable from 3.4 GHz to 11.1 GHz via current pulses of sub-millisecond duration applied to a small and nonvolatile magnetic bias assembly. This assembly is limited in the area over which it can achieve a large and uniform magnetic field, necessitating filters realized from small resonant cavities micromachined in thin films of Yttrium Iron Garnet. Filter insertion loss of 3.2 dB to 5.1 dB and out-of-band third order input intercept point greater than 41 dBm are achieved. The filter's broad frequency range, compact size, low insertion loss, high out-of-band linearity, and zero static power consumption are essential for protecting RF transceivers and antennas from interference, thus facilitating their use in mobile applications like IoT and 6G networks.
△ Less
Submitted 19 September, 2023; v1 submitted 1 August, 2023;
originally announced August 2023.
-
MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors
Authors:
Seunguk Song,
Kwan-Ho Kim,
Srikrishna Chakravarthi,
Zirun Han,
Gwangwoo Kim,
Kyung Yeol Ma,
Hyeon Suk Shin,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characte…
▽ More
Al$_{0.68}$Sc$_{0.32}$N (AlScN) has gained attention for its outstanding ferroelectric properties, including a high coercive field and high remnant polarization. Although AlScN-based ferroelectric field-effect transistors (FETs) for memory applications have been demonstrated, a device for logic applications with minimal hysteresis has not been reported. This study reports on the transport characteristics of a MoS$_{2}$ negative capacitance FET (NCFET) based on an AlScN ferroelectric material. We experimentally demonstrate the effect of a dielectric layer in the gate stack on the memory window and subthreshold swing (SS) of the NCFET. We show that the hysteresis behavior of transfer characteristics in the NCFET can be minimized with the inclusion of a non-ferroelectric dielectric layer, which fulfills the capacitance-matching condition. Remarkably, we also observe the NC effect in MoS$_{2}$/AlScN NCFETs arrays based on large-area monolayer MoS$_{2}$ synthesized by chemical vapor deposition, showing the SS values smaller than its thermionic limit (~36-60 mV/dec) and minimal variation in threshold voltages (< 20 mV).
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
Physical Color Calibration of Digital Pathology Scanners for Robust Artificial Intelligence Assisted Cancer Diagnosis
Authors:
Xiaoyi Ji,
Richard Salmon,
Nita Mulliqi,
Umair Khan,
Yinxi Wang,
Anders Blilie,
Henrik Olsson,
Bodil Ginnerup Pedersen,
Karina Dalsgaard Sørensen,
Benedicte Parm Ulhøi,
Svein R Kjosavik,
Emilius AM Janssen,
Mattias Rantalainen,
Lars Egevad,
Pekka Ruusuvuori,
Martin Eklund,
Kimmo Kartasalo
Abstract:
The potential of artificial intelligence (AI) in digital pathology is limited by technical inconsistencies in the production of whole slide images (WSIs), leading to degraded AI performance and posing a challenge for widespread clinical application as fine-tuning algorithms for each new site is impractical. Changes in the imaging workflow can also lead to compromised diagnoses and patient safety r…
▽ More
The potential of artificial intelligence (AI) in digital pathology is limited by technical inconsistencies in the production of whole slide images (WSIs), leading to degraded AI performance and posing a challenge for widespread clinical application as fine-tuning algorithms for each new site is impractical. Changes in the imaging workflow can also lead to compromised diagnoses and patient safety risks. We evaluated whether physical color calibration of scanners can standardize WSI appearance and enable robust AI performance. We employed a color calibration slide in four different laboratories and evaluated its impact on the performance of an AI system for prostate cancer diagnosis on 1,161 WSIs. Color standardization resulted in consistently improved AI model calibration and significant improvements in Gleason grading performance. The study demonstrates that physical color calibration provides a potential solution to the variation introduced by different scanners, making AI-based cancer diagnostics more reliable and applicable in clinical settings.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
DevServOps: DevOps For Product-Oriented Product-Service Systems
Authors:
Anas Dakkak,
Jan Bosch,
Helena Holmström Olsson
Abstract:
For companies develo** web-based applications, the Dev and the Ops refer to different groups with either operational or development focus. Therefore, DevOps help these companies streamline software development and operations activities by emphasizing the collaboration between the two groups. However, for companies producing software-intensive products, the Ops would refer to customers who use an…
▽ More
For companies develo** web-based applications, the Dev and the Ops refer to different groups with either operational or development focus. Therefore, DevOps help these companies streamline software development and operations activities by emphasizing the collaboration between the two groups. However, for companies producing software-intensive products, the Ops would refer to customers who use and operate the product. In addition, companies producing software-intensive products do not only offer products to customers but rather Product Service Systems (PSS), where product-related services play a key role in ensuring customer satisfaction besides their significant revenue contribution. Thus, the context of product-oriented PSS is very different from web-based applications, making it difficult to apply DevOps without considering the role of the services. Therefore, based on a two years participant observation case study conducted at a multinational telecommunications systems provider, we propose a new and novel approach called Development-Services-Operations (DevServOps) which incorporates services as a key player facilitating an end-to-end software flow toward customers in one direction and feedback toward developers in the other direction. Services become the glue that connects the Dev and the Ops, achieved by providing internal services to increase the precision of the development organization and external services to increase the speed of deployment and new content adoption on the customers' side.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
A plug-and-play molecular approach for room temperature polariton condensation
Authors:
Prathmesh Deshmukh,
Sitakanta Satapathy,
Evripidis Michail,
Andrew H. Olsson,
Rezlind Bushati,
Ravindra Kumar Yadav,
Mandeep Khatoniar,
Junsheng Chen,
George John,
Bo W. Laursen,
Amar H. Flood,
Matthew Y. Sfeir,
Vinod M. Menon
Abstract:
Exciton-polaritons (EP), half-light half-matter quasiparticles that form in optical cavities, are attractive platforms for creating macroscopic coherent states like BECs. EPs based on organic molecules are of particular interest for realizing such states at room temperature while offering the promise of synthetic tunability. However, the demonstrations of such condensates have been limited to a fe…
▽ More
Exciton-polaritons (EP), half-light half-matter quasiparticles that form in optical cavities, are attractive platforms for creating macroscopic coherent states like BECs. EPs based on organic molecules are of particular interest for realizing such states at room temperature while offering the promise of synthetic tunability. However, the demonstrations of such condensates have been limited to a few specific molecular systems1. Here we report a universal platform for realizing molecular polariton condensates using commercial dyes that solves long standing material challenges. This solution is made possible using a new and programable molecular material called small-molecule, ionic isolation lattices (SMILES) with the potential to incorporate a wide array of molecular fluorophores2. We show EP condensation in rhodamine by incorporating it into SMILES lattice placed in a planar microcavity. The SMILES approach overcomes the major drawbacks of organic molecular photophysical systems such as self-quenching, which sets the foundation for realizing practical polaritonic devices operating at ambient temperatures covering wide spectral range.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
Wafer-scale growth of two-dimensional, phase-pure InSe
Authors:
Seunguk Song,
Sungho Jeon,
Mahfujur Rahaman,
Jason Lynch,
Pawan Kumar,
Srikrishna Chakravarthi,
Gwangwoo Kim,
Xingyu Du,
Eric Blanton,
Kim Kisslinger,
Michael Snure,
Nicholas R. Glavin,
Eric A. Stach,
Roy H. Olsson,
Deep Jariwala
Abstract:
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the d…
▽ More
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers. We achieve thickness-controlled, layer-by-layer epitaxial growth of InSe on c-plane sapphire via dynamic pulse control of Se/In flux ratio. The layer-by-layer growth allows thickness control over wafer scale with tunable optical properties comparable to bulk crystals. Finally, the gate-tunable electrical transport suggests that MOCVD-grown InSe could be a potential channel material for back-end-of-line integration in logic transistors with field-effect mobility comparable to single-crystalline flakes.
△ Less
Submitted 4 March, 2023;
originally announced March 2023.
-
Bayesian causal inference in automotive software engineering and online evaluation
Authors:
Yuchu Liu,
David Issa Mattos,
Jan Bosch,
Helena Holmström Olsson,
Jonn Lantz
Abstract:
Randomised field experiments, such as A/B testing, have long been the gold standard for evaluating software changes. In the automotive domain, running randomised field experiments is not always desired, possible, or even ethical. In the face of such limitations, we develop a framework BOAT (Bayesian causal modelling for ObvservAtional Testing), utilising observational studies in combination with B…
▽ More
Randomised field experiments, such as A/B testing, have long been the gold standard for evaluating software changes. In the automotive domain, running randomised field experiments is not always desired, possible, or even ethical. In the face of such limitations, we develop a framework BOAT (Bayesian causal modelling for ObvservAtional Testing), utilising observational studies in combination with Bayesian causal inference, in order to understand real-world impacts from complex automotive software updates and help software development organisations arrive at causal conclusions. In this study, we present three causal inference models in the Bayesian framework and their corresponding cases to address three commonly experienced challenges of software evaluation in the automotive domain. We develop the BOAT framework with our industry collaborator, and demonstrate the potential of causal inference by conducting empirical studies on a large fleet of vehicles. Moreover, we relate the causal assumption theories to their implications in practise, aiming to provide a comprehensive guide on how to apply the causal models in automotive software engineering. We apply Bayesian propensity score matching for producing balanced control and treatment groups when we do not have access to the entire user base, Bayesian regression discontinuity design for identifying covariate dependent treatment assignments and the local treatment effect, and Bayesian difference-in-differences for causal inference of treatment effect overtime and implicitly control unobserved confounding factors. Each one of the demonstrative case has its grounds in practise, and is a scenario experienced when randomisation is not feasible. With the BOAT framework, we enable online software evaluation in the automotive domain without the need of a fully randomised experiment.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes
Authors:
Xiwen Liu,
John Ting,
Yunfei He,
Merrilyn Mercy Adzo Fiagbenu,
Jeffrey Zheng,
Dixiong Wang,
Jonathan Frost,
Pariasadat Musavigharavi,
Giovanni Esteves,
Kim Kisslinger,
Surendra B. Anantharaman,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing inn…
▽ More
The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data centric processing. At a hardware level, this presents an urgent need to integrate dense, high-performance and low-power memory units with Si logic-processor units. However, data-heavy problems such as search and pattern matching also require paradigm changing innovations at the circuit and architecture level to enable compute in memory (CIM) operations. CIM architectures that combine data storage yet concurrently offer low-delay and small footprint are highly sought after but have not been realized. Here, we present Aluminum Scandium Nitride (AlScN) ferroelectric diode (FeD) memristor devices that allow for storage, search and neural network-based pattern recognition in a transistor-free architecture. Our devices can be directly integrated on top of Si processors in a scalable, back-end-of-line process. We leverage the field-programmability, non-volatility and non-linearity of FeDs to demonstrated circuit blocks that can support search operations in-situ memory with search delay times < 0.1 ns and a cell footprint < 0.12 um^2. In addition, we demonstrate matrix multiplication operations with 4-bit operation of the FeDs. Our results highlight FeDs as promising candidates for fast, efficient, and multifunctional CIM platforms.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
5G Network on Wings: A Deep Reinforcement Learning Approach to the UAV-based Integrated Access and Backhaul
Authors:
Hongyi Zhang,
Zhiqiang Qi,
**gya Li,
Anders Aronsson,
Jan Bosch,
Helena Holmström Olsson
Abstract:
Fast and reliable wireless communication has become a critical demand in human life. In the case of mission-critical (MC) scenarios, for instance, when natural disasters strike, providing ubiquitous connectivity becomes challenging by using traditional wireless networks. In this context, unmanned aerial vehicle (UAV) based aerial networks offer a promising alternative for fast, flexible, and relia…
▽ More
Fast and reliable wireless communication has become a critical demand in human life. In the case of mission-critical (MC) scenarios, for instance, when natural disasters strike, providing ubiquitous connectivity becomes challenging by using traditional wireless networks. In this context, unmanned aerial vehicle (UAV) based aerial networks offer a promising alternative for fast, flexible, and reliable wireless communications. Due to unique characteristics such as mobility, flexible deployment, and rapid reconfiguration, drones can readily change location dynamically to provide on-demand communications to users on the ground in emergency scenarios. As a result, the usage of UAV base stations (UAV-BSs) has been considered an appropriate approach for providing rapid connection in MC scenarios. In this paper, we study how to control multiple UAV-BSs in both static and dynamic environments. We use a system-level simulator to model an MC scenario in which a macro BS of a cellular network is out of service and multiple UAV-BSs are deployed using integrated access and backhaul (IAB) technology to provide coverage for users in the disaster area. With the data collected from the system-level simulation, a deep reinforcement learning algorithm is developed to jointly optimize the three-dimensional placement of these multiple UAV-BSs, which adapt their 3-D locations to the on-ground user movement. The evaluation results show that the proposed algorithm can support the autonomous navigation of the UAV-BSs to meet the MC service requirements in terms of user throughput and drop rate.
△ Less
Submitted 26 May, 2023; v1 submitted 4 February, 2022;
originally announced February 2022.
-
Scalable CMOS-BEOL compatible AlScN/2D Channel FE-FETs
Authors:
Kwan-Ho Kim,
Seyong Oh,
Merrilyn Mercy Adzo Fiagbenu,
Jeffrey Zheng,
Pariasadat Musavigharavi,
Pawan Kumar,
Nicholas Trainor,
Areej Aljarb,
Yi Wan,
Hyong Min Kim,
Keshava Katti,
Zichen Tang,
Vincent C. Tung,
Joan Redwing,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field…
▽ More
Intimate integration of memory devices with logic transistors is a frontier challenge in computer hardware. This integration is essential for augmenting computational power concurrently with enhanced energy efficiency in big-data applications such as artificial intelligence. Despite decades of efforts, reliable, compact, energy efficient and scalable memory devices are elusive. Ferroelectric Field Effect Transistors (FE-FETs) are a promising candidate but their scalability and performance in a back-end-of-line (BEOL) process remain unattained. Here, we present scalable BEOL compatible FE-FETs using two-dimensional (2D) MoS2 channel and AlScN ferroelectric dielectric. We have fabricated a large array of FE-FETs with memory windows larger than 7.8 V, ON/OFF ratios of greater than 10^7, and ON current density greater than 250 uA/um, all at ~80 nm channel lengths. Our devices show stable retention up to 20000 secs and endurance up to 20000 cycles in addition to 4-bit pulse programmable memory features thereby opening a path towards scalable 3D hetero-integration of 2D semiconductor memory with Si CMOS logic.
△ Less
Submitted 6 January, 2022;
originally announced January 2022.
-
Autonomous Navigation and Configuration of Integrated Access Backhauling for UAV Base Station Using Reinforcement Learning
Authors:
Hongyi Zhang,
**gya Li,
Zhiqiang Qi,
Xingqin Lin,
Anders Aronsson,
Jan Bosch,
Helena Holmström Olsson
Abstract:
Fast and reliable connectivity is essential to enhancing situational awareness and operational efficiency for public safety mission-critical (MC) users. In emergency or disaster circumstances, where existing cellular network coverage and capacity may not be available to meet MC communication demands, deployable-network-based solutions such as cells-on-wheels/wings can be utilized swiftly to ensure…
▽ More
Fast and reliable connectivity is essential to enhancing situational awareness and operational efficiency for public safety mission-critical (MC) users. In emergency or disaster circumstances, where existing cellular network coverage and capacity may not be available to meet MC communication demands, deployable-network-based solutions such as cells-on-wheels/wings can be utilized swiftly to ensure reliable connection for MC users. In this paper, we consider a scenario where a macro base station (BS) is destroyed due to a natural disaster and an unmanned aerial vehicle carrying BS (UAV-BS) is set up to provide temporary coverage for users in the disaster area. The UAV-BS is integrated into the mobile network using the 5G integrated access and backhaul (IAB) technology. We propose a framework and signalling procedure for applying machine learning to this use case. A deep reinforcement learning algorithm is designed to jointly optimize the access and backhaul antenna tilt as well as the three-dimensional location of the UAV-BS in order to best serve the on-ground MC users while maintaining a good backhaul connection. Our result shows that the proposed algorithm can autonomously navigate and configure the UAV-BS to improve the throughput and reduce the drop rate of MC users.
△ Less
Submitted 13 May, 2022; v1 submitted 14 December, 2021;
originally announced December 2021.
-
Bayesian propensity score matching in automotive embedded software engineering
Authors:
Yuchu Liu,
David Issa Mattos,
Jan Bosch,
Helena Holmström Olsson,
Jonn Lantz
Abstract:
Randomised field experiments, such as A/B testing, have long been the gold standard for evaluating the value that new software brings to customers. However, running randomised field experiments is not always desired, possible or even ethical in the development of automotive embedded software. In the face of such restrictions, we propose the use of the Bayesian propensity score matching technique f…
▽ More
Randomised field experiments, such as A/B testing, have long been the gold standard for evaluating the value that new software brings to customers. However, running randomised field experiments is not always desired, possible or even ethical in the development of automotive embedded software. In the face of such restrictions, we propose the use of the Bayesian propensity score matching technique for causal inference of observational studies in the automotive domain. In this paper, we present a method based on the Bayesian propensity score matching framework, applied in the unique setting of automotive software engineering. This method is used to generate balanced control and treatment groups from an observational online evaluation and estimate causal treatment effects from the software changes, even with limited samples in the treatment group. We exemplify the method with a proof-of-concept in the automotive domain. In the example, we have a larger control ($N_c=1100$) fleet of cars using the current software and a small treatment fleet ($N_t=38$), in which we introduce a new software variant. We demonstrate a scenario that ship** of a new software to all users is restricted, as a result, a fully randomised experiment could not be conducted. Therefore, we utilised the Bayesian propensity score matching method with 14 observed covariates as inputs. The results show more balanced groups, suitable for estimating causal treatment effects from the collected observational data. We describe the method in detail and share our configuration. Furthermore, we discuss how can such a method be used for online evaluation of new software utilising small groups of samples.
△ Less
Submitted 26 September, 2021;
originally announced September 2021.
-
An architecture for enabling A/B experiments in automotive embedded software
Authors:
Yuchu Liu,
Jan Bosch,
Helena Holmström Olsson,
Jonn Lantz
Abstract:
A/B experimentation is a known technique for data-driven product development and has demonstrated its value in web-facing businesses. With the digitalisation of the automotive industry, the focus in the industry is shifting towards software. For automotive embedded software to continuously improve, A/B experimentation is considered an important technique. However, the adoption of such a technique…
▽ More
A/B experimentation is a known technique for data-driven product development and has demonstrated its value in web-facing businesses. With the digitalisation of the automotive industry, the focus in the industry is shifting towards software. For automotive embedded software to continuously improve, A/B experimentation is considered an important technique. However, the adoption of such a technique is not without challenge. In this paper, we present an architecture to enable A/B testing in automotive embedded software. The design addresses challenges that are unique to the automotive industry in a systematic fashion. Going from hypothesis to practice, our architecture was also applied in practice for running online experiments on a considerable scale. Furthermore, a case study approach was used to compare our proposal with state-of-practice in the automotive industry. We found our architecture design to be relevant and applicable in the efforts of adopting continuous A/B experiments in automotive embedded software.
△ Less
Submitted 6 July, 2021;
originally announced July 2021.
-
Size matters? Or not: A/B testing with limited sample in automotive embedded software
Authors:
Yuchu Liu,
David Issa Mattos,
Jan Bosch,
Helena Holmström Olsson,
Jonn Lantz
Abstract:
A/B testing is gaining attention in the automotive sector as a promising tool to measure causal effects from software changes. Different from the web-facing businesses, where A/B testing has been well-established, the automotive domain often suffers from limited eligible users to participate in online experiments. To address this shortcoming, we present a method for designing balanced control and…
▽ More
A/B testing is gaining attention in the automotive sector as a promising tool to measure causal effects from software changes. Different from the web-facing businesses, where A/B testing has been well-established, the automotive domain often suffers from limited eligible users to participate in online experiments. To address this shortcoming, we present a method for designing balanced control and treatment groups so that sound conclusions can be drawn from experiments with considerably small sample sizes. While the Balance Match Weighted method has been used in other domains such as medicine, this is the first paper to apply and evaluate it in the context of software development. Furthermore, we describe the Balance Match Weighted method in detail and we conduct a case study together with an automotive manufacturer to apply the group design method in a fleet of vehicles. Finally, we present our case study in the automotive software engineering domain, as well as a discussion on the benefits and limitations of the A/B group design method.
△ Less
Submitted 10 November, 2021; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Bias field correction of MPRAGE by an external reference -- The poor man's MP2RAGE
Authors:
H. Olsson,
G. Helms
Abstract:
Purpose: To implement and evaluate a sequential approach to obtain semi-quantitative T1-weighted MPRAGE images, unbiased by B1 inhomogeneities at 7T.
Methods: In the reference gradient echo used for normalization of the MPRAGE image, flip angle (aGE) and acquisition voxel size (Vref) was varied to optimize tissue contrast and acquisition time (Tacq). The finalized protocol was implemented at thr…
▽ More
Purpose: To implement and evaluate a sequential approach to obtain semi-quantitative T1-weighted MPRAGE images, unbiased by B1 inhomogeneities at 7T.
Methods: In the reference gradient echo used for normalization of the MPRAGE image, flip angle (aGE) and acquisition voxel size (Vref) was varied to optimize tissue contrast and acquisition time (Tacq). The finalized protocol was implemented at three different resolutions and the reproducibility was evaluated. Maps of T1 were derived based on the normalized MPRAGE through forward signal modelling.
Results: A good compromise between tissue contrast and SNR was reached at aGE=3°. A reduction of the reference GE Tacq by a factor of 4, at the cost of negligible bias, was obtained by increasing Vref with a factor of 8 relative the MPRAGE resolution. The coefficient-of-variation in segmented WM was 9+/-5% after normalization, compared to 24+/-12% before. The T1 maps showed no obvious bias and had reasonable values with regard to literature, especially after optional B1 correction through separate flip angle map**.
Conclusion: A non-interleaved acquisition for normalization of MPRAGE offers a simple alternative to MP2RAGE to obtain semi-quantitative purely T1-weighted images. These images can be converted to T1 maps analogously to the established MP2RAGE approach. Scan time can be reduced by increasing Vref which has a miniscule effect on image quality.
△ Less
Submitted 12 May, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
On the Assessment of Benchmark Suites for Algorithm Comparison
Authors:
David Issa Mattos,
Lucas Ruud,
Jan Bosch,
Helena Holmström Olsson
Abstract:
Benchmark suites, i.e. a collection of benchmark functions, are widely used in the comparison of black-box optimization algorithms. Over the years, research has identified many desired qualities for benchmark suites, such as diverse topology, different difficulties, scalability, representativeness of real-world problems among others. However, while the topology characteristics have been subjected…
▽ More
Benchmark suites, i.e. a collection of benchmark functions, are widely used in the comparison of black-box optimization algorithms. Over the years, research has identified many desired qualities for benchmark suites, such as diverse topology, different difficulties, scalability, representativeness of real-world problems among others. However, while the topology characteristics have been subjected to previous studies, there is no study that has statistically evaluated the difficulty level of benchmark functions, how well they discriminate optimization algorithms and how suitable is a benchmark suite for algorithm comparison. In this paper, we propose the use of an item response theory (IRT) model, the Bayesian two-parameter logistic model for multiple attempts, to statistically evaluate these aspects with respect to the empirical success rate of algorithms. With this model, we can assess the difficulty level of each benchmark, how well they discriminate different algorithms, the ability score of an algorithm, and how much information the benchmark suite adds in the estimation of the ability scores. We demonstrate the use of this model in two well-known benchmark suites, the Black-Box Optimization Benchmark (BBOB) for continuous optimization and the Pseudo Boolean Optimization (PBO) for discrete optimization. We found that most benchmark functions of BBOB suite have high difficulty levels (compared to the optimization algorithms) and low discrimination. For the PBO, most functions have good discrimination parameters but are often considered too easy. We discuss potential uses of IRT in benchmarking, including its use to improve the design of benchmark suites, to measure multiple aspects of the algorithms, and to design adaptive suites.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Real-time End-to-End Federated Learning: An Automotive Case Study
Authors:
Hongyi Zhang,
Jan Bosch,
Helena Holmström Olsson
Abstract:
With the development and the increasing interests in ML/DL fields, companies are eager to apply Machine Learning/Deep Learning approaches to increase service quality and customer experience. Federated Learning was implemented as an effective model training method for distributing and accelerating time-consuming model training while protecting user data privacy. However, common Federated Learning a…
▽ More
With the development and the increasing interests in ML/DL fields, companies are eager to apply Machine Learning/Deep Learning approaches to increase service quality and customer experience. Federated Learning was implemented as an effective model training method for distributing and accelerating time-consuming model training while protecting user data privacy. However, common Federated Learning approaches, on the other hand, use a synchronous protocol to conduct model aggregation, which is inflexible and unable to adapt to rapidly changing environments and heterogeneous hardware settings in real-world scenarios. In this paper, we present an approach to real-time end-to-end Federated Learning combined with a novel asynchronous model aggregation protocol. Our method is validated in an industrial use case in the automotive domain, focusing on steering wheel angle prediction for autonomous driving. Our findings show that asynchronous Federated Learning can significantly improve the prediction performance of local edge models while maintaining the same level of accuracy as centralized machine learning. Furthermore, by using a sliding training window, the approach can minimize communication overhead, accelerate model training speed and consume real-time streaming data, proving high efficiency when deploying ML/DL components to heterogeneous real-world embedded systems.
△ Less
Submitted 13 September, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor
Authors:
Xiwen Liu,
Dixiong Wang,
Jeffrey Zheng,
Pariasadat Musavigharavi,
**shui Miao,
Eric A. Stach,
Roy H. Olsson III,
Deep Jariwala
Abstract:
In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMO…
▽ More
In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However, subsequent efforts to produce a practical, compact FE-FET have been plagued by low retention and incompatibility with Complementary Metal Oxide Semiconductor (CMOS) process integration. These difficulties led to the development of trapped-charge based memory devices (also called floating gate or flash memory), and these are now the mainstream non-volatile memory (NVM) technology. Over the past two decades, advances in oxide FE materials have rejuvenated the field of ferroelectrics and made FE random access memories (FE-RAM) a commercial reality. Despite these advances, commercial FE-RAM based on lead zirconium titanate (PZT) has stalled at the 130 nm due to process challenges.The recent discovery of scandium doped aluminum nitride (AlScN) as a CMOS compatible ferroelectric presents new opportunities for direct memory integration with logic transistors due to the low temperature of AlScN deposition (approx. 350 C). This temperature is compatible with CMOS back end of line processes. Here, we present a FE-FET device composed of an AlScN FE dielectric layer integrated with a channel layer of a van der Waals two-dimensional (2D) semiconductor, MoS2. Our devices show an ON/OFF ratio ~ 10^6, concurrent with a normalized memory window of 0.3 V/nm. The devices also demonstrate stable, two-state memory retention for up to 10^4 seconds. Our simulations and experimental results suggest that the combination of AlScN and 2D semiconductors is nearly ideal for low power FE-FET memory. These results demonstrate a new approach in embedded memory and in-memory computing, and could even lead to effective neuromorphic computing architectures.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Statistical Models for the Analysis of Optimization Algorithms with Benchmark Functions
Authors:
David Issa Mattos,
Jan Bosch,
Helena Holmström Olsson
Abstract:
Frequentist statistical methods, such as hypothesis testing, are standard practice in papers that provide benchmark comparisons. Unfortunately, these methods have often been misused, e.g., without testing for their statistical test assumptions or without controlling for family-wise errors in multiple group comparisons, among several other problems. Bayesian Data Analysis (BDA) addresses many of th…
▽ More
Frequentist statistical methods, such as hypothesis testing, are standard practice in papers that provide benchmark comparisons. Unfortunately, these methods have often been misused, e.g., without testing for their statistical test assumptions or without controlling for family-wise errors in multiple group comparisons, among several other problems. Bayesian Data Analysis (BDA) addresses many of the previously mentioned shortcomings but its use is not widely spread in the analysis of empirical data in the evolutionary computing community. This paper provides three main contributions. First, we motivate the need for utilizing Bayesian data analysis and provide an overview of this topic. Second, we discuss the practical aspects of BDA to ensure that our models are valid and the results transparent. Finally, we provide five statistical models that can be used to answer multiple research questions. The online appendix provides a step-by-step guide on how to perform the analysis of the models discussed in this paper, including the code for the statistical models, the data transformations and the discussed tables and figures.
△ Less
Submitted 15 May, 2021; v1 submitted 8 October, 2020;
originally announced October 2020.
-
Two-Phase Data Synthesis for Income: An Application to the NHIS
Authors:
Kevin Ros,
Henrik Olsson,
**gchen Hu
Abstract:
We propose a two-phase synthesis process for synthesizing income, a sensitive variable which is usually highly-skewed and has a number of reported zeros. We consider two forms of a continuous income variable: a binary form, which is modeled and synthesized in phase 1; and a non-negative continuous form, which is modeled and synthesized in phase 2. Bayesian synthesis models are proposed for the two…
▽ More
We propose a two-phase synthesis process for synthesizing income, a sensitive variable which is usually highly-skewed and has a number of reported zeros. We consider two forms of a continuous income variable: a binary form, which is modeled and synthesized in phase 1; and a non-negative continuous form, which is modeled and synthesized in phase 2. Bayesian synthesis models are proposed for the two-phase synthesis process, and other synthesis models are readily implementable. We demonstrate our methods with applications to a sample from the National Health Interview Survey (NHIS). Utility and risk profiles of generated synthetic datasets are evaluated and compared to results from a single-phase synthesis process.
△ Less
Submitted 22 July, 2020; v1 submitted 2 June, 2020;
originally announced June 2020.
-
Reducing bias in dual flip angle T1-map** in human brain at 7T
Authors:
H. Olsson,
M. Andersen,
R. Wirestam,
J. Lätt,
G. Helms
Abstract:
Purpose: To address the systematic bias in whole-brain dual flip angle (DFA) T1-map** at 7T by optimizing the flip angle pair and carefully selecting RF pulse shape and duration. Theory and Methods: Spoiled gradient echoes can be used to estimate whole-brain maps of T1. This can be accomplished by using only two acquisitions with different flip angles, i.e., a DFA-based approach. Although DFA-ba…
▽ More
Purpose: To address the systematic bias in whole-brain dual flip angle (DFA) T1-map** at 7T by optimizing the flip angle pair and carefully selecting RF pulse shape and duration. Theory and Methods: Spoiled gradient echoes can be used to estimate whole-brain maps of T1. This can be accomplished by using only two acquisitions with different flip angles, i.e., a DFA-based approach. Although DFA-based T1-map** is seemingly straightforward to implement, it is sensitive to bias caused by incomplete spoiling and incidental magnetization transfer (MT) effects. Further bias is introduced by the increased B0 and B1+ inhomogeneities at 7T. Experiments were performed to determine the optimal flip angle pair and appropriate RF pulse shape and duration. Obtained T1 estimates were validated using inversion recovery prepared EPI and compared to literature values. A multi-echo readout was used to increase SNR, enabling quantification of R2* and susceptibility, X. Results: Incomplete spoiling was observed above a local flip angle of approximately 20 degrees. An asymmetric gauss-filtered sinc pulse with a constant duration of 700 us showed a sufficiently flat frequency response profile to avoid incomplete excitation in areas with high B0 offsets. A pulse duration of 700 us minimized effects from incidental MT. Conclusion: When performing DFA-based T1-map** one should (i) limit the higher flip angle to avoid incomplete spoiling, (ii) use a RF pulse shape insensitive to B0 inhomogeneities and (iii) apply a constant RF pulse duration, balanced to minimize incidental MT.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Engineering AI Systems: A Research Agenda
Authors:
Jan Bosch,
Ivica Crnkovic,
Helena Holmström Olsson
Abstract:
Artificial intelligence (AI) and machine learning (ML) are increasingly broadly adopted in industry, However, based on well over a dozen case studies, we have learned that deploying industry-strength, production quality ML models in systems proves to be challenging. Companies experience challenges related to data quality, design methods and processes, performance of models as well as deployment an…
▽ More
Artificial intelligence (AI) and machine learning (ML) are increasingly broadly adopted in industry, However, based on well over a dozen case studies, we have learned that deploying industry-strength, production quality ML models in systems proves to be challenging. Companies experience challenges related to data quality, design methods and processes, performance of models as well as deployment and compliance. We learned that a new, structured engineering approach is required to construct and evolve systems that contain ML/DL components. In this paper, we provide a conceptualization of the typical evolution patterns that companies experience when employing ML as well as an overview of the key problems experienced by the companies that we have studied. The main contribution of the paper is a research agenda for AI engineering that provides an overview of the key engineering challenges surrounding ML solutions and an overview of open items that need to be addressed by the research community at large.
△ Less
Submitted 3 June, 2020; v1 submitted 16 January, 2020;
originally announced January 2020.
-
Falling Through the Cracks: Modeling the Formation of Social Category Boundaries
Authors:
Vicky Chuqiao Yang,
Tamara van der Does,
Henrik Olsson
Abstract:
Social categorizations divide people into "us" and "them," often along continuous attributes such as political ideology or skin color. This division results in both positive consequences, such as a sense of community, and negative ones, such as group conflict. Further, individuals in the middle of the spectrum can fall through the cracks of this categorization process and are seen as out-group by…
▽ More
Social categorizations divide people into "us" and "them," often along continuous attributes such as political ideology or skin color. This division results in both positive consequences, such as a sense of community, and negative ones, such as group conflict. Further, individuals in the middle of the spectrum can fall through the cracks of this categorization process and are seen as out-group by individuals on either side of the spectrum, becoming inbetweeners. Here, we propose a quantitative, dynamical-system model that studies the joint influence of cognitive and social processes. We model where two social groups draw the boundaries between "us" and "them" on a continuous attribute. Our model predicts that both groups tend to draw a more restrictive boundary than the middle of the spectrum. As a result, each group sees the individuals in the middle of the attribute space as an out-group. We test this prediction using U.S. political survey data on how political independents are perceived by registered party members as well as existing experiments on the perception of racially ambiguous faces, and find support.
△ Less
Submitted 26 February, 2021; v1 submitted 23 November, 2019;
originally announced November 2019.
-
Pathologist-Level Grading of Prostate Biopsies with Artificial Intelligence
Authors:
Peter Ström,
Kimmo Kartasalo,
Henrik Olsson,
Leslie Solorzano,
Brett Delahunt,
Daniel M. Berney,
David G. Bostwick,
Andrew J. Evans,
David J. Grignon,
Peter A. Humphrey,
Kenneth A. Iczkowski,
James G. Kench,
Glen Kristiansen,
Theodorus H. van der Kwast,
Katia R. M. Leite,
Jesse K. McKenney,
Jon Oxley,
Chin-Chen Pan,
Hemamali Samaratunga,
John R. Srigley,
Hiroyuki Takahashi,
Toyonori Tsuzuki,
Murali Varma,
Ming Zhou,
Johan Lindberg
, et al. (7 additional authors not shown)
Abstract:
Background: An increasing volume of prostate biopsies and a world-wide shortage of uro-pathologists puts a strain on pathology departments. Additionally, the high intra- and inter-observer variability in grading can result in over- and undertreatment of prostate cancer. Artificial intelligence (AI) methods may alleviate these problems by assisting pathologists to reduce workload and harmonize grad…
▽ More
Background: An increasing volume of prostate biopsies and a world-wide shortage of uro-pathologists puts a strain on pathology departments. Additionally, the high intra- and inter-observer variability in grading can result in over- and undertreatment of prostate cancer. Artificial intelligence (AI) methods may alleviate these problems by assisting pathologists to reduce workload and harmonize grading.
Methods: We digitized 6,682 needle biopsies from 976 participants in the population based STHLM3 diagnostic study to train deep neural networks for assessing prostate biopsies. The networks were evaluated by predicting the presence, extent, and Gleason grade of malignant tissue for an independent test set comprising 1,631 biopsies from 245 men. We additionally evaluated grading performance on 87 biopsies individually graded by 23 experienced urological pathologists from the International Society of Urological Pathology. We assessed discriminatory performance by receiver operating characteristics (ROC) and tumor extent predictions by correlating predicted millimeter cancer length against measurements by the reporting pathologist. We quantified the concordance between grades assigned by the AI and the expert urological pathologists using Cohen's kappa.
Results: The performance of the AI to detect and grade cancer in prostate needle biopsy samples was comparable to that of international experts in prostate pathology. The AI achieved an area under the ROC curve of 0.997 for distinguishing between benign and malignant biopsy cores, and 0.999 for distinguishing between men with or without prostate cancer. The correlation between millimeter cancer predicted by the AI and assigned by the reporting pathologist was 0.96. For assigning Gleason grades, the AI achieved an average pairwise kappa of 0.62. This was within the range of the corresponding values for the expert pathologists (0.60 to 0.73).
△ Less
Submitted 2 July, 2019;
originally announced July 2019.
-
Physical Signal Classification Via Deep Neural Networks
Authors:
Benjamin Epstein,
Roy H. Olsson III
Abstract:
A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic.
A Deep Neural Network is applied to classify physical signatures obtained from physical sensor measurements of running gasoline and diesel-powered vehicles and other devices. The classification provides information on the target identities as to vehicle type and even vehicle model. The physical measurements include acoustic, acceleration (vibration), geophonic, and magnetic.
△ Less
Submitted 15 November, 2018;
originally announced November 2018.
-
Impact of local information in growing networks
Authors:
Emanuele Massaro,
Henrik Olsson,
Andrea Guazzini,
Franco Bagnoli
Abstract:
We present a new model of the evolutionary dynamics and the growth of on-line social networks. The model emulates people's strategies for acquiring information in social networks, emphasising the local subjective view of an individual and what kind of information the individual can acquire when arriving in a new social context. The model proceeds through two phases: (a) a discovery phase, in which…
▽ More
We present a new model of the evolutionary dynamics and the growth of on-line social networks. The model emulates people's strategies for acquiring information in social networks, emphasising the local subjective view of an individual and what kind of information the individual can acquire when arriving in a new social context. The model proceeds through two phases: (a) a discovery phase, in which the individual becomes aware of the surrounding world and (b) an elaboration phase, in which the individual elaborates locally the information trough a cognitive-inspired algorithm. Model generated networks reproduce main features of both theoretical and real-world networks, such as high clustering coefficient, low characteristic path length, strong division in communities, and variability of degree distributions.
△ Less
Submitted 29 September, 2013;
originally announced September 2013.
-
Tailorable Stimulated Brillouin Scattering in Nanoscale Silicon Waveguides
Authors:
Heedeuk Shin,
Wenjun Qiu,
Robert Jarecki,
Jonathan A. Cox,
Roy H. Olsson III,
Andrew Starbuck,
Zheng Wang,
Peter T. Rakich
Abstract:
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic s…
▽ More
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic silicon waveguides for the first time, yielding 3000 times stronger forward SBS responses than any previous waveguide system. Simulations reveal that a coherent combination of electrostrictive forces and radiation pressures are responsible for greatly enhanced photon-phonon coupling at nano-scales. Highly tailorable Brillouin nonlinearities are produced by engineering the structure of a membrane-suspended waveguide to yield Brillouin resonances from 1 to 18 GHz through high quality-factor (>1000) phonon modes. Such wideband and tailorable stimulated Brillouin scattering in silicon photonics could enable practical realization of on-chip slow-light devices, RF-photonic filtering and sensing, and ultra-narrow-band laser sources by using standard semiconductor fabrication and CMOS technologies.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.