-
Evaluating Parametric Integrals in the Minkowski Regime without Contour Deformation
Authors:
Stephen Jones,
Anton Olsson,
Thomas Stone
Abstract:
We present selected examples demonstrating an alternative approach to contour deformation for numerically computing loop integrals in the Minkowski regime. This method focuses on identifying singular hypersurfaces (varieties of the $\mathscr{F}$ polynomial) and map** them to known points which can then be resolved by employing blow-ups/sector decomposition techniques, thereby avoiding the need f…
▽ More
We present selected examples demonstrating an alternative approach to contour deformation for numerically computing loop integrals in the Minkowski regime. This method focuses on identifying singular hypersurfaces (varieties of the $\mathscr{F}$ polynomial) and map** them to known points which can then be resolved by employing blow-ups/sector decomposition techniques, thereby avoiding the need for contour deformation. Using this technique, we achieve improved convergence properties without the need for contour deformation, which is known to significantly increase the complexity of the integrand by introducing, for example, derivatives of the $\mathscr{F}$ polynomial and complicated Jacobians. We highlight that while we have only tested the approach on selected one-, two- and three-loop massless and one-loop massive examples, it shows promise for practical applications, offering potential benefits over the traditional approach. Evaluation times are compared with existing contour deformation implementations to illustrate the performance of this alternative method.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Direct writing of room temperature polariton condensate lattice by top-down approach
Authors:
Ravindra Kumar Yadav,
Sitakanta Satapathy,
Prathmesh Deshmukh,
Biswajit Datta,
Addhyaya Sharma,
Andrew Olsson,
Junsheng Chen,
Bo W. Laursen,
Amar H. Flood,
Matthew Y. Sfeir,
Vinod M. Menon
Abstract:
Realizing lattices of exciton polariton condensates has been of much interest owing to the potential of such systems to realize analog Hamiltonian simulators and physical computing architectures. Prior work on polariton condensate lattices has primarily been on GaAs-based systems, with the recent advent of organic molecules and perovskite systems allowing room-temperature operation. However, in mo…
▽ More
Realizing lattices of exciton polariton condensates has been of much interest owing to the potential of such systems to realize analog Hamiltonian simulators and physical computing architectures. Prior work on polariton condensate lattices has primarily been on GaAs-based systems, with the recent advent of organic molecules and perovskite systems allowing room-temperature operation. However, in most of these room temperature systems, the lattices are defined using a bottom-up approach by patterning the bottom mirrors, significantly limiting the types of lattices and refractive index contrast that can be realized. Here, we report a direct write approach that uses a Focused Ion Beam (FIB) to etch 2D lattice into a planar microcavity. Such etching of the cavity allows for realizing high refractive index contrast lattices. We realize the polariton condensate lattice using the highly photostable host-guest Frenkel excitons of an organic dye small molecular ionic lattice (SMILES).1,2 The lattice structures are defined on a planar microcavity embedded with SMILES using FIB, allowing the realization of lattices with different geometries, including defect sites on demand. The band structure of the lattice and the emergence of condensation are imaged using momentum-resolved spectroscopy. The present approach allows us to study periodic, quasi-periodic, and disordered polariton condensate lattices at room temperature using a top-down approach without compromising on the quantum yield of the organic excitonic material embedded in the cavity.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Two-loop amplitudes for ttH production: the quark-initiated Nf-part
Authors:
Bakul Agarwal,
Gudrun Heinrich,
Stephen P. Jones,
Matthias Kerner,
Sven Yannick Klein,
Jannis Lang,
Vitaly Magerya,
Anton Olsson
Abstract:
We present numerical results for the two-loop virtual amplitude entering the NNLO corrections to Higgs boson production in association with a top quark pair at the LHC, focusing, as a proof of concept of our method, on the part of the quark-initiated channel containing loops of massless or massive quarks. Results for the UV renormalised and IR subtracted two-loop amplitude for each colour structur…
▽ More
We present numerical results for the two-loop virtual amplitude entering the NNLO corrections to Higgs boson production in association with a top quark pair at the LHC, focusing, as a proof of concept of our method, on the part of the quark-initiated channel containing loops of massless or massive quarks. Results for the UV renormalised and IR subtracted two-loop amplitude for each colour structure are given at selected phase-space points and visualised in terms of surfaces as a function of two-dimensional slices of the full phase space.
△ Less
Submitted 30 May, 2024; v1 submitted 5 February, 2024;
originally announced February 2024.
-
AI could create a perfect storm of climate misinformation
Authors:
Victor Galaz,
Hannah Metzler,
Stefan Daume,
Andreas Olsson,
Björn Lindström,
Arvid Marklund
Abstract:
We are in the midst of a transformation of the digital news ecosystem. The expansion of online social networks, the influence of recommender systems, increased automation, and new generative artificial intelligence tools are rapidly changing the speed and the way misinformation about climate change and sustainability issues moves around the world. Policymakers, researchers and the public need to c…
▽ More
We are in the midst of a transformation of the digital news ecosystem. The expansion of online social networks, the influence of recommender systems, increased automation, and new generative artificial intelligence tools are rapidly changing the speed and the way misinformation about climate change and sustainability issues moves around the world. Policymakers, researchers and the public need to combine forces to address the dangerous combination of opaque social media algorithms, polarizing social bots, and a new generation of AI-generated content. This synthesis brief is the result of a collaboration between Stockholm Resilience Centre at Stockholm University, the Beijer Institute of Ecological Economics at the Royal Swedish Academy of Sciences, the Complexity Science Hub Vienna, and Karolinska Institutet. It has been put together as an independent contribution to the Nobel Prize Summit 2023, Truth, Trust and Hope, Washington D.C., 24th to 26th of May 2023.
△ Less
Submitted 26 June, 2023; v1 submitted 22 June, 2023;
originally announced June 2023.
-
Numerical Scattering Amplitudes with pySecDec
Authors:
G. Heinrich,
S. P. Jones,
M. Kerner,
V. Magerya,
A. Olsson,
J. Schlenk
Abstract:
We present a major update of the program pySecDec, a toolbox for the evaluation of dimensionally regulated parameter integrals. The new version enables the evaluation of multi-loop integrals as well as amplitudes in a highly distributed and flexible way, optionally on GPUs. The program has been optimised and runs up to an order of magnitude faster than the previous release. A new integration proce…
▽ More
We present a major update of the program pySecDec, a toolbox for the evaluation of dimensionally regulated parameter integrals. The new version enables the evaluation of multi-loop integrals as well as amplitudes in a highly distributed and flexible way, optionally on GPUs. The program has been optimised and runs up to an order of magnitude faster than the previous release. A new integration procedure that utilises construction-free median Quasi-Monte Carlo rules is implemented. The median lattice rules can outperform our previous component-by-component rules by a factor of 5 and remove the limitation on the maximum number of sampling points. The expansion by regions procedures have been extended to support Feynman integrals with numerators, and functions for automatically determining when and how analytic regulators should be introduced are now available. The new features and performance are illustrated with several examples.
△ Less
Submitted 21 December, 2023; v1 submitted 31 May, 2023;
originally announced May 2023.
-
A plug-and-play molecular approach for room temperature polariton condensation
Authors:
Prathmesh Deshmukh,
Sitakanta Satapathy,
Evripidis Michail,
Andrew H. Olsson,
Rezlind Bushati,
Ravindra Kumar Yadav,
Mandeep Khatoniar,
Junsheng Chen,
George John,
Bo W. Laursen,
Amar H. Flood,
Matthew Y. Sfeir,
Vinod M. Menon
Abstract:
Exciton-polaritons (EP), half-light half-matter quasiparticles that form in optical cavities, are attractive platforms for creating macroscopic coherent states like BECs. EPs based on organic molecules are of particular interest for realizing such states at room temperature while offering the promise of synthetic tunability. However, the demonstrations of such condensates have been limited to a fe…
▽ More
Exciton-polaritons (EP), half-light half-matter quasiparticles that form in optical cavities, are attractive platforms for creating macroscopic coherent states like BECs. EPs based on organic molecules are of particular interest for realizing such states at room temperature while offering the promise of synthetic tunability. However, the demonstrations of such condensates have been limited to a few specific molecular systems1. Here we report a universal platform for realizing molecular polariton condensates using commercial dyes that solves long standing material challenges. This solution is made possible using a new and programable molecular material called small-molecule, ionic isolation lattices (SMILES) with the potential to incorporate a wide array of molecular fluorophores2. We show EP condensation in rhodamine by incorporating it into SMILES lattice placed in a planar microcavity. The SMILES approach overcomes the major drawbacks of organic molecular photophysical systems such as self-quenching, which sets the foundation for realizing practical polaritonic devices operating at ambient temperatures covering wide spectral range.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
Causal inference in multi-cohort studies using the target trial framework to identify and minimize sources of bias
Authors:
Marnie Downes,
Meredith O'Connor,
Craig A. Olsson,
David Burgner,
Sharon Goldfeld,
Elizabeth A. Spry,
George Patton,
Margarita Moreno-Betancur
Abstract:
Longitudinal cohort studies, which follow a group of individuals over time, provide the opportunity to examine causal effects of complex exposures on long-term health outcomes. Utilizing data from multiple cohorts has the potential to add further benefit by improving precision of estimates through data pooling and by allowing examination of effect heterogeneity through replication of analyses acro…
▽ More
Longitudinal cohort studies, which follow a group of individuals over time, provide the opportunity to examine causal effects of complex exposures on long-term health outcomes. Utilizing data from multiple cohorts has the potential to add further benefit by improving precision of estimates through data pooling and by allowing examination of effect heterogeneity through replication of analyses across cohorts. However, the interpretation of findings can be complicated by biases that may be compounded when pooling data, or, contribute to discrepant findings when analyses are replicated. The "target trial" is a powerful tool for guiding causal inference in single-cohort studies. Here we extend this conceptual framework to address the specific challenges that can arise in the multi-cohort setting. By representing a clear definition of the target estimand, the target trial provides a central point of reference against which biases arising in each cohort and from data pooling can be systematically assessed. Consequently, analyses can be designed to reduce these biases and the resulting findings appropriately interpreted in light of potential remaining biases. We use a case study to demonstrate the framework and its potential to strengthen causal inference in multi-cohort studies through improved analysis design and clarity in the interpretation of findings.
△ Less
Submitted 4 July, 2024; v1 submitted 22 June, 2022;
originally announced June 2022.
-
Design of a Canted-cosine-theta orbit corrector for the High Luminosity LHC
Authors:
K. Pepitone,
G. Kirby,
R. Ruber,
A. Ahl,
M. Canale,
I. Dugic,
L. Gentini,
M. Johansson,
G. Karlsson,
J. Kovacikova,
J. Lindström,
A. Olsson,
M. Olvegård
Abstract:
The High Luminosity LHC requires dipole orbit correctors grouped in double aperture magnet assemblies. They provide a field of 3.1 T at 100 A in an aperture of 70 mm. The current standard design is a classical cosine-theta layout made with ribbon cable. However, the electric insulation of the ribbon cable is not radiation-resistant enough to withstand the radiation load expected in the coming year…
▽ More
The High Luminosity LHC requires dipole orbit correctors grouped in double aperture magnet assemblies. They provide a field of 3.1 T at 100 A in an aperture of 70 mm. The current standard design is a classical cosine-theta layout made with ribbon cable. However, the electric insulation of the ribbon cable is not radiation-resistant enough to withstand the radiation load expected in the coming years of LHC operation. A new design, based on a radiation-resistant cable with polyimide insulator, that can replace the existing orbit correctors at their end-of-life, is needed. The challenge is to design a magnet that fits directly into the existing positions and that can operate with the same busbars, passive quench protection, and power supplies as existing magnets. We propose a self-protected canted-cosine-theta (CCT) design. We take the opportunity to explore new concepts for the CCT design to produce a cost-effective and high-quality design with a more sustainable use of resources. The new orbit corrector design meets high requirements on the field quality while kee** within the same mechanical volume and maximum excitation current.
A collaboration of Swedish universities and Swedish industry has been formed for the development and production of a prototype magnet following a concurrent engineering (CE) methodology to reduce the time needed to produce a functional CCT magnet. The magnet has a 1 m long CCT dipole layout consisting of two coils. The superconductor is a commercially available 0.33 mm wire with polyimide insulation in a 6-around-1 cable. The channels in the coil formers, that determine the CCT layout, allow for 2 x 5 cable layers. A total of 70 windings makes that the coil current can be kept below 100 A. We will present the detailed design and preliminary quench simulations.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Hard and soft materials: Putting consistent van der Waals density functionals to work
Authors:
Carl M. Frostenson,
Erik Jedvik Granhed,
Vivekanand Shukla,
Pär A. T. Olsson,
Elsebeth Schroder,
Per Hyldgaard
Abstract:
We present the idea and illustrate potential benefits of having a tool chain of closely related regular, unscreened and screened hybrid exchange-correlation (XC) functionals, all within the consistent formulation of the van der Waals density functional (vdW-DF) method [JPCM 32, 393001 (2020)]. Use of this chain of nonempirical XC functionals allows us to map when the inclusion of truly nonlocal ex…
▽ More
We present the idea and illustrate potential benefits of having a tool chain of closely related regular, unscreened and screened hybrid exchange-correlation (XC) functionals, all within the consistent formulation of the van der Waals density functional (vdW-DF) method [JPCM 32, 393001 (2020)]. Use of this chain of nonempirical XC functionals allows us to map when the inclusion of truly nonlocal exchange and of truly nonlocal correlation is important. Here we begin the map** by addressing hard and soft material challenges: magnetic elements, perovskites, and biomolecular problems. We also predict the structure and polarization for a ferroelectric polymer. To facilitate this work and future broader explorations, we furthermore present a stress formulation for spin vdW-DF and illustrate use of a simple stability-modeling scheme to assert when the prediction of a soft mode (an imaginary-frequency vibrational mode, ubiquitous in perovskites and soft matter) implies a prediction of an actual low-temperature transformation.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Gas Emission Measurement System from Chilla-Juliaca -Peru
Authors:
J. Mendoza Montoya,
A. Olsson,
S. - G. Mårtensson,
K. J. Huanca Zea,
A. R. Rojas Calla,
J. Chilo
Abstract:
In many countries around the world, most of the waste use to be disposed of to landfills, this generate public concern about the health effects of emissions. Landfill gases are produced by the natural bacterial decomposition of waste and it is about half of methane, with the remainder mostly carbon dioxide and minor amounts of other gases. Real-time measurement and modelling of emissions gases in…
▽ More
In many countries around the world, most of the waste use to be disposed of to landfills, this generate public concern about the health effects of emissions. Landfill gases are produced by the natural bacterial decomposition of waste and it is about half of methane, with the remainder mostly carbon dioxide and minor amounts of other gases. Real-time measurement and modelling of emissions gases in landfills is important. In this work a low cost wireless measurement system is developed using MOS gas sensors (MQ4-1,MQ4-2, MQ5 and MQ9), microcontroller and XBee/HC-12 wireless communications modules. The system can be mounted on an unmanned aircraft (UAV, drone) or deployed as a wireless sensor network. Experiments have been carried out near a closed landfill, which show high gas concentration
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
The Multi-Blade Boron-10-based neutron detector performance using a focusing reflectometer
Authors:
G. Mauri,
I. Apostolidis,
M. J. Christensen,
A. Glavic,
C. C. Lai,
A. Laloni,
F. Messi,
A. Lindh Olsson,
L. Robinson,
J. Stahn,
P. O. Svensson,
R. Hall-Wilton,
F. Piscitelli
Abstract:
The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scale…
▽ More
The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scaled-down demonstrator of Estia. The results of these tests are discussed. It will be shown how the characteristics of the Multi-Blade detector are features that allow the focusing reflectometry operation mode. Additionally the performance of the Multi-Blade, in terms of rate capability, exceeds current state-of-the-art technology. The improvements with respect to the previous prototypes are also highlighted; from background considerations to the linear and angular uniformity response of the detector.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Fruit and Vegetable Identification Using Machine Learning for Retail Applications
Authors:
Frida Femling,
Adam Olsson,
Fernando Alonso-Fernandez
Abstract:
This paper describes an approach of creating a system identifying fruit and vegetables in the retail market using images captured with a video camera attached to the system. The system helps the customers to label desired fruits and vegetables with a price according to its weight. The purpose of the system is to minimize the number of human computer interactions, speed up the identification proces…
▽ More
This paper describes an approach of creating a system identifying fruit and vegetables in the retail market using images captured with a video camera attached to the system. The system helps the customers to label desired fruits and vegetables with a price according to its weight. The purpose of the system is to minimize the number of human computer interactions, speed up the identification process and improve the usability of the graphical user interface compared to existing manual systems. The hardware of the system is constituted by a Raspberry Pi, camera, display, load cell and a case. To classify an object, different convolutional neural networks have been tested and retrained. To test the usability, a heuristic evaluation has been performed with several users, concluding that the implemented system is more user friendly compared to existing systems.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Motivation and possibilities of affordable low-frequency radio interferometry in space
Authors:
P. Janhunen,
A. Olsson,
R. Karlsson,
J. -M. Griessmeier
Abstract:
The motivation to build spaceborne interferometric arrays for low-frequency radio astronomy is widely recognised because frequencies below the ionospheric cutoff are inaccessible for ground-based radio telescopes. We discuss the theoretical possibilities to use low-frequency spacecraft arrays to detect signals from magnetized extrasolar planets, including earthlike ones. A major uncertainty that…
▽ More
The motivation to build spaceborne interferometric arrays for low-frequency radio astronomy is widely recognised because frequencies below the ionospheric cutoff are inaccessible for ground-based radio telescopes. We discuss the theoretical possibilities to use low-frequency spacecraft arrays to detect signals from magnetized extrasolar planets, including earthlike ones. A major uncertainty that prohibits us from knowing if it is possible to detect exoplanet cyclotron maser signals is the incomplete knowledge of the properties of the interstellar plasma.
We also present some ideas of how to construct efficient and affordable space-based radio telescopes. We discuss two possibilities, a log-periodic antenna in the spin plane and a two-spacecraft concept where one spacecraft holds a large parabolic wire mesh reflector and the other one contains the receiver. In the latter case, the effective area could be of the order of 1 km$^2$. The purpose of the paper is to stress once more the importance of spaceborne low-frequency measurements by bringing in the intriguing possibility of detecting earthlike exoplanet radio emissions and to demonstrate that building even very large low-frequency antennas in space is not necessarily too expensive.
△ Less
Submitted 23 May, 2003;
originally announced May 2003.
