-
Orbital magnetization in two-dimensional materials from high-throughput computational screening
Authors:
Martin Ovesen,
Thomas Olsen
Abstract:
We calculate the orbital magnetization of 822 two-dimensional magnetic materials from the Computational 2D Materials Database (C2DB). For compounds containing 5$d$ elements we find orbital moments of the order of 0.3-0.5 $μ_\mathrm{B}$, which points to the necessity of including these in any type of magnetic modeling and comparison with experiments. It is also shown that the alignment of orbital m…
▽ More
We calculate the orbital magnetization of 822 two-dimensional magnetic materials from the Computational 2D Materials Database (C2DB). For compounds containing 5$d$ elements we find orbital moments of the order of 0.3-0.5 $μ_\mathrm{B}$, which points to the necessity of including these in any type of magnetic modeling and comparison with experiments. It is also shown that the alignment of orbital moments with respect to the spin largely follows the predictions from Hund's rule and that deviations may be explained by the $d$-band splitting originating from the crystal field - for example in the important case of CrI$_3$. Finally, we show that for certain insulators, Hubbard corrections may lead to large and fully unquenched orbital moments that are pinned to the lattice rather than the spin and that these moments can lead to enormous magnetic anisotropies. Such unquenched ground states are only found from density functional theory calculations that include both Hubbard corrections and self-consistent spin-orbit coupling and largely invalidates the use of the magnetic force theorem for calculating magnetic anisotropies.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
AntiFold: Improved antibody structure-based design using inverse folding
Authors:
Magnus Haraldson Høie,
Alissa Hummer,
Tobias H. Olsen,
Broncio Aguilar-Sanjuan,
Morten Nielsen,
Charlotte M. Deane
Abstract:
The design and optimization of antibodies requires an intricate balance across multiple properties. Protein inverse folding models, capable of generating diverse sequences folding into the same structure, are promising tools for maintaining structural integrity during antibody design. Here, we present AntiFold, an antibody-specific inverse folding model, fine-tuned from ESM-IF1 on solved and predi…
▽ More
The design and optimization of antibodies requires an intricate balance across multiple properties. Protein inverse folding models, capable of generating diverse sequences folding into the same structure, are promising tools for maintaining structural integrity during antibody design. Here, we present AntiFold, an antibody-specific inverse folding model, fine-tuned from ESM-IF1 on solved and predicted antibody structures. AntiFold outperforms existing inverse folding tools on sequence recovery across complementarity-determining regions, with designed sequences showing high structural similarity to their solved counterpart. It additionally achieves stronger correlations when predicting antibody-antigen binding affinity in a zero-shot manner, while performance is augmented further when including antigen information. AntiFold assigns low probabilities to mutations that disrupt antigen binding, synergizing with protein language model residue probabilities, and demonstrates promise for guiding antibody optimization while retaining structure-related properties. AntiFold is freely available under the BSD 3-Clause as a web server at https://opig.stats.ox.ac.uk/webapps/antifold/ and and pip installable package at https://github.com/oxpig/AntiFold
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Beyond the random phase approximation for calculating Curie temperatures in ferromagnets: application to Fe, Ni, Co and monolayer CrI3
Authors:
Varun Rajeev Pavizhakumari,
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
The magnetic properties of solids are typically analyzed in terms of Heisenberg models where the electronic structure is approximated by interacting localized spins. However, even in such models the evaluation of thermodynamic properties constitutes a major challenge and is usually handled by a mean field decoupling scheme. The random phase approximation (RPA) comprises a common approach and is of…
▽ More
The magnetic properties of solids are typically analyzed in terms of Heisenberg models where the electronic structure is approximated by interacting localized spins. However, even in such models the evaluation of thermodynamic properties constitutes a major challenge and is usually handled by a mean field decoupling scheme. The random phase approximation (RPA) comprises a common approach and is often applied to evaluate critical temperatures although it is well known that the method is only accurate well below the critical temperature. In the present work we compare the performance of the RPA with a different decoupling scheme proposed by Callen as well as the mean field decoupling of interacting Holstein-Primakoff (HP) magnons. We consider three-dimensional (3D) as well as two-dimensional (2D) model systems where the Curie temperature is governed by anisotropy. In 3D, the Callen method is the most accurate in the classical limit, and we show that the Callen decoupling produces the best agreement with experiments for bcc Fe, fcc Ni and fcc Co with exchange interactions obtained from first principles. In contrast, for low spin systems where a quantum mechanical treatment in pertinent, the HP and RPA methods appear are superior to the Callen decoupling. In 2D systems with magnetic order driven by single-ion anisotropy, it is shown that HP fails rather dramatically and both RPA and Callen approaches severely overestimates Curie temperatures. The most accurate approach is then constructed by combining RPA with the Callen decoupling of single-ion anisotropy, which yields the correct lack of order for S=1/2. We exemplify this by the case of monolayer CrI3 using exchange constant extracted from experiments.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Linear magnetoelectricity in the Zintl phase pnictides (Ba, Ca, Sr)$\mathrm{Mn}_2\mathrm{(P, As, Sb)}_2$ from first principles calculations
Authors:
John Mangeri,
Martin Ovesen,
Thomas Olsen
Abstract:
We report a comprehensive set of density functional theory calculations on the family of layered antiferromagnetic manganese pnictides (Ba, Ca, Sr)$\mathrm{Mn}_2\mathrm{(P, As, Sb)}_2$. We characterize all components to the linear magnetoelectric (ME) tensor $α$ which are parsed into their contributions from spin and orbital moments for both lattice-mediated and their clamped-ion electronic analog…
▽ More
We report a comprehensive set of density functional theory calculations on the family of layered antiferromagnetic manganese pnictides (Ba, Ca, Sr)$\mathrm{Mn}_2\mathrm{(P, As, Sb)}_2$. We characterize all components to the linear magnetoelectric (ME) tensor $α$ which are parsed into their contributions from spin and orbital moments for both lattice-mediated and their clamped-ion electronic analogs. Our main results show that the orbital magnetization components cannot be neglected in these systems. The ME response is dominated by electronic effects with total $α$ values exceeding those of the prototypical $\mathrm{Cr}_2\mathrm{O}_3$ (i.e. $α\simeq$ 6.79 ps/m in $\mathrm{BaMn}_2\mathrm{As}_2$). We also identify a strong correlation with the computed ME susceptibility on pnictogen substitution in the trigonal subfamily albeit with weaker amplitudes ($α\simeq$ 0.2-1.7 ps/m). Additionally, we provide the dependence of these predictions on the Hubbard +U correction, at the level of the local density approximation, which show large variations on the calculated ME coefficients in the tetragonal compounds highlighting the role of strong correlation in these compounds.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Uncovering the lowest thickness limit for room-temperature ferromagnetism of Cr$_{1.6}$Te$_{2}$
Authors:
Sandeep Kumar Chaluvadi,
Shyni Punathum Chalil,
Anupam Jana,
Deepak Dagur,
Giovanni Vinai,
Federico Motti,
Jun Fujii,
Moussa Mezhoud,
Ulrike Lüders,
Vincent Polewczyk,
Ivana Vobornik,
Giorgio Rossi,
Chiara Bigi,
Younghun Hwang,
Thomas Olsen,
Pasquale Orgiani,
Federico Mazzola
Abstract:
Metallic ferromagnetic transition metal dichalcogenides have emerged as important building blocks for scalable magnonics and memory applications. Downscaling such systems to the ultra-thin limit is critical to integrate them into technology. Here, we achieved layer-by-layer control over the transition metal dichalcogenide Cr$_{1.6}$Te$_{2}$ by using pulsed laser deposition, and we uncovered the mi…
▽ More
Metallic ferromagnetic transition metal dichalcogenides have emerged as important building blocks for scalable magnonics and memory applications. Downscaling such systems to the ultra-thin limit is critical to integrate them into technology. Here, we achieved layer-by-layer control over the transition metal dichalcogenide Cr$_{1.6}$Te$_{2}$ by using pulsed laser deposition, and we uncovered the minimum critical thickness above which room temperature magnetic order is maintained. The electronic and magnetic structure is explored experimentally and theoretically and it is shown that the films exhibit strong in-plane magnetic anisotropy as a consequence of large spin-orbit effects. Our study elucidates both magnetic and electronic properties of Cr$_{1.6}$Te$_{2}$, and corroborates the importance of intercalation to tune the magnetic properties of nanoscale materials architectures.
△ Less
Submitted 7 June, 2024; v1 submitted 18 March, 2024;
originally announced March 2024.
-
Minority magnons and mode branching in monolayer Fe$_3$GeTe$_2$
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
In this letter, we predict the existence of minority magnons in a monolayer of Fe$_3$GeTe$_2$ using first principles calculations. Minority magnons constitute a new type of collective magnetic excitations which increase the magnetic moment rather than lower it, contrary to ordinary (majority) magnons. The presence of such quasi-particles is made possible by the nontrivial ferromagnetic band struct…
▽ More
In this letter, we predict the existence of minority magnons in a monolayer of Fe$_3$GeTe$_2$ using first principles calculations. Minority magnons constitute a new type of collective magnetic excitations which increase the magnetic moment rather than lower it, contrary to ordinary (majority) magnons. The presence of such quasi-particles is made possible by the nontrivial ferromagnetic band structure of Fe$_3$GeTe$_2$ originating from its nonequivalent Fe sublattices. The result is a strong peak in the dynamic spin-raising susceptibility $χ^{-+}(ω)$ in the long wavelength limit, which is the hallmark of minority magnon physics. We calculate the susceptibility using time-dependent density functional theory and perform a detailed mode analysis, which allows us to separate and investigate the individual magnon modes as well as the Stoner excitations that constitute the many-body spectrum. For minority as well as majority magnons, the analysis reveals a plethora of magnetic excitations, which in addition to the standard main magnon branches include both satellite, valley and spin-inversion magnons, originating from the itinerancy of the ferromagnetic order. The physics underlying this analysis is in no way restricted to Fe$_3$GeTe$_2$, and minority magnons are expected to be observable in many complex ferromagnetic materials.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Antiferromagnetism in two-dimensional materials: progress and computational challenges
Authors:
Thomas Olsen
Abstract:
We present a perspective on the status of antiferromagnetism in two-dimensional (2D) materials. Various types of spin-compensated orders are discussed and include non-collinear order, spin spirals and altermagnetism. Spin-orbit effects ultimately determine, whether compounds exhibit long range order, Kosterlitz-Thouless physics, or multiferroic properties and we discuss the basic magnetic prototyp…
▽ More
We present a perspective on the status of antiferromagnetism in two-dimensional (2D) materials. Various types of spin-compensated orders are discussed and include non-collinear order, spin spirals and altermagnetism. Spin-orbit effects ultimately determine, whether compounds exhibit long range order, Kosterlitz-Thouless physics, or multiferroic properties and we discuss the basic magnetic prototypes that may arise in 2D materials depending on the magnetic anisotropy and ordering vector. A summary of 2D antiferromagnets that have been characterized experimentally is provided - with particular emphasis on magnetic anisotropies and Neel temperatures. We then outline the ingredients needed to describe the magnetic properties using density functional theory. In particular, the systematic determination of magnetic ground states from the generalized Bloch theorem and the magnetic force theorem, which may be used to calculate magnetic excitations from the Heisenberg model with parameters determined from first principles. The methods are exemplified by application to the monolayer helimagnet NiBr$_2$. Finally, we present a summary of predicted and prospective 2D antiferromagnets and discuss the challenges associated with the prediction of Néel temperatures from first principles.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Two-dimensional altermagnets from high throughput computational screening: symmetry requirements, chiral magnons and spin-orbit effects
Authors:
Joachim Sødequist,
Thomas Olsen
Abstract:
We present a high throughput computational search for altermagnetism in two-dimensional (2D) materials based on the Computational 2D Materials Database (C2DB). We start by showing that the symmetry requirements for altermagnetism in 2D are somewhat more strict compared to bulk materials and applying these yields a total of 7 altermagnets in the C2DB. The collinear ground state in these monolayers…
▽ More
We present a high throughput computational search for altermagnetism in two-dimensional (2D) materials based on the Computational 2D Materials Database (C2DB). We start by showing that the symmetry requirements for altermagnetism in 2D are somewhat more strict compared to bulk materials and applying these yields a total of 7 altermagnets in the C2DB. The collinear ground state in these monolayers are verified by spin spiral calculations using the generalized Bloch theorem. We focus on four $d$-wave altermagnetic materials belonging to the $P2_1'/c'$ magnetic space group - RuF$_4$, VF$_4$, AgF$_2$ and OsF$_4$. The first three of these are known experimentally as van der Waals bonded bulk materials and are likely to be exfoliable from their bulk parent compounds. We perform a detailed analysis of the electronic structure and non-relativistic spin splitting in $k$-space exemplified by RuF$_4$. The magnon spectrum of RuF$_4$ is calculated from the magnetic force theorem and it is shown that the symmetries that enforce degenerate magnon bands in anti-ferromagnets are absent in altermagnets and give rise to the obtained non-degenerate magnon spectrum. We then include spin-orbit effects and show that these will dominate the splitting ofmagnons in RuF$_4$. Finally, we provide an example of $i$-wave altermagnetism in the 2H phase of FeBr$_3$.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
GPAW: An open Python package for electronic-structure calculations
Authors:
Jens Jørgen Mortensen,
Ask Hjorth Larsen,
Mikael Kuisma,
Aleksei V. Ivanov,
Alireza Taghizadeh,
Andrew Peterson,
Anubhab Haldar,
Asmus Ougaard Dohn,
Christian Schäfer,
Elvar Örn Jónsson,
Eric D. Hermes,
Fredrik Andreas Nilsson,
Georg Kastlunger,
Gianluca Levi,
Hannes Jónsson,
Hannu Häkkinen,
Jakub Fojt,
Jiban Kangsabanik,
Joachim Sødequist,
Jouko Lehtomäki,
Julian Heske,
Jussi Enkovaara,
Kirsten Trøstrup Winther,
Marcin Dulak,
Marko M. Melander
, et al. (22 additional authors not shown)
Abstract:
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually indepen…
▽ More
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually independent and can be connected by transformations via the real-space grid. This multi-basis feature renders GPAW highly versatile and unique among similar codes. By virtue of its modular structure, the GPAW code constitutes an ideal platform for implementation of new features and methodologies. Moreover, it is well integrated with the Atomic Simulation Environment (ASE) providing a flexible and dynamic user interface. In addition to ground-state DFT calculations, GPAW supports many-body GW band structures, optical excitations from the Bethe-Salpeter Equation (BSE), variational calculations of excited states in molecules and solids via direct optimization, and real-time propagation of the Kohn-Sham equations within time-dependent DFT. A range of more advanced methods to describe magnetic excitations and non-collinear magnetism in solids are also now available. In addition, GPAW can calculate non-linear optical tensors of solids, charged crystal point defects, and much more. Recently, support of GPU acceleration has been achieved with minor modifications of the GPAW code thanks to the CuPy library. We end the review with an outlook describing some future plans for GPAW.
△ Less
Submitted 16 April, 2024; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Magnetic order in the computational 2D materials database (C2DB) from high throughput spin spiral calculations
Authors:
Joachim Sødequist,
Thomas Olsen
Abstract:
We report a detailed investigation of the magnetic order in 192 stable magnetic two-dimensional materials from the Computational 2D Materials Database having one magnetic atom in the unit cell. The calculations are based on a systematic workflow that employs spin spiral calculations and yields the magnetic order in terms of a two-dimensional ordering vector $\mathbf{Q}$. We then include spin-orbit…
▽ More
We report a detailed investigation of the magnetic order in 192 stable magnetic two-dimensional materials from the Computational 2D Materials Database having one magnetic atom in the unit cell. The calculations are based on a systematic workflow that employs spin spiral calculations and yields the magnetic order in terms of a two-dimensional ordering vector $\mathbf{Q}$. We then include spin-orbit coupling to extract the easy and hard axes for collinear structures and the orientation of spiral planes in non-collinear structures. Finally, for all predicted ferromagnets we compute the Dzyaloshinskii-Moriya interactions and determine whether or not these are strong enough to overcome the magnetic anisotropy and stabilise a chiral spin spiral ground state. These steps completely determines the ground state order within the spiralling ansatz. We find 58 ferromagnets, 21 collinear anti-ferromagnets, and 85 non-collinear ground states of which 15 are chiral spin spirals driven by Dzyaloshinskii-Moriya interactions. The results show that non-collinear order is in fact as common as collinear order in these materials and emphasise the need for detailed investigation of the magnetic ground state when reporting magnetic properties of new materials. Furthermore, non-collinear order typically breaks symmetries inherent to the lattice and may give rise to emergent properties such as multiferroicity, magnetoelectricity or second order optical effects that would be predicted as absent based on a collinear assumption.
△ Less
Submitted 21 September, 2023;
originally announced September 2023.
-
Imaging the Electric Field with X-Ray Diffraction Microscopy
Authors:
Trygve Magnus Ræder,
Urko Petralanda,
Thomas Olsen,
Hugh Simons
Abstract:
The properties of semiconductors and functional dielectrics are defined by their response in electric fields, which may be perturbed by defects and the strain they generate. In this work, we demonstrate how diffraction-based X-ray microscopy techniques may be utilized to image the electric field in insulating crystalline materials. By analysing a prototypical ferro- and piezoelectric material, BaT…
▽ More
The properties of semiconductors and functional dielectrics are defined by their response in electric fields, which may be perturbed by defects and the strain they generate. In this work, we demonstrate how diffraction-based X-ray microscopy techniques may be utilized to image the electric field in insulating crystalline materials. By analysing a prototypical ferro- and piezoelectric material, BaTiO$_{3}$, we identify trends that can guide experimental design towards imaging the electric field using any diffraction-based X-ray microscopy technique. We explain these trends in the context of dark-field X-ray microscopy, but the framework is also valid for Bragg scanning probe X-ray microscopy, Bragg coherent diffraction imaging and Bragg X-ray ptychography. The ability to quantify electric field distributions alongside the defects and strain already accessible via these techniques offers a more comprehensive picture of the often complex structure-property relationships that exist in many insulating and semiconducting materials.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
Efficient Inverse-designed Structural Infill for Complex Engineering Structures
Authors:
Peter Dørffler Ladegaard Jensen,
Tim Felle Olsen,
J. Andreas Bærentzen,
Niels Aage,
Ole Sigmund
Abstract:
Inverse design of high-resolution and fine-detailed 3D lightweight mechanical structures is notoriously expensive due to the need for vast computational resources and the use of very fine-scaled complex meshes. Furthermore, in designing for additive manufacturing, infill is often neglected as a component of the optimized structure. In this paper, both concerns are addressed using a de-homogenizati…
▽ More
Inverse design of high-resolution and fine-detailed 3D lightweight mechanical structures is notoriously expensive due to the need for vast computational resources and the use of very fine-scaled complex meshes. Furthermore, in designing for additive manufacturing, infill is often neglected as a component of the optimized structure. In this paper, both concerns are addressed using a de-homogenization topology optimization procedure on complex engineering structures discretized by 3D unstructured hexahedrals.
Using a rectangular-hole microstructure (reminiscent to the stiffness optimal orthogonal rank-3 multi-scale) as a base material for the multi-scale optimization, a coarse-scale optimized geometry can be obtained using homogenization-based topology optimization. Due to the microstructure periodicity, this coarse-scale geometry can be up-sampled to a fine physical geometry with optimized infill, with minor loss in structural performance and at a fraction of the cost of a fine-scale solution. The upsampling on 3D unstructured grids is achieved through stream surface tracing which aligns with the optimized local orientation. The periodicity of the physical geometry can be tuned, such that the material serves as a structural component and also as an efficient infill for additive manufacturing designs.
The method is demonstrated through three examples. It achieves comparable structural performance to state-of-the-art methods but stands out for its significant computational time reduction, much faster than the base-line method. By allowing multiple active layers, the mapped solution becomes more mechanically stable, leading to an increased critical buckling load factor without additional computational expense. The proposed approach achieves promising results, benchmarking against large-scale SIMP models demonstrates computational efficiency improvements of up to 250 times.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
Selenium and the role of defects for photovoltaic applications
Authors:
Hadeel Moustafa,
Jiban Kangsabanik,
Fabian Bertoldo,
Simone Manti,
Kristian S. Thygesen,
Karsten W. Jacobsen,
Thomas Olsen
Abstract:
We present first principles calculations of the electronic properties of trigonal selenium with emphasis on photovoltaic applications. The band gap and optical absorption spectrum of pristine selenium is calculated from many-body perturbation theory yielding excellent agreement with experiments. We then investigate the role of intrinsic as well as extrinsic defects and estimate the equilibrium con…
▽ More
We present first principles calculations of the electronic properties of trigonal selenium with emphasis on photovoltaic applications. The band gap and optical absorption spectrum of pristine selenium is calculated from many-body perturbation theory yielding excellent agreement with experiments. We then investigate the role of intrinsic as well as extrinsic defects and estimate the equilibrium concentrations resulting from realistic synthesis conditions. The intrinsic defects are dominated by vacancies and we show that these do not result in significant non-radiative recombination. The charge balance remains dominated by vacancies when extrinsic defects are included, but these may give rise to sizable non-radiative recombination rates, which could severely limit the performance of selenium based solar cells. Our results thus imply that the pollution by external elements is a decisive factor for the photovoltaic efficiency, which will be of crucial importance when considering synthesis conditions for any type of device engineering.
△ Less
Submitted 20 December, 2023; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Emergent properties of van der Waals bilayers revealed by computational stacking
Authors:
Sahar Pakdel,
Asbjørn Rasmussen,
Alireza Taghizadeh,
Mads Kruse,
Thomas Olsen,
Kristian S. Thygesen
Abstract:
Stacking of two-dimensional (2D) materials has emerged as a facile strategy for realising exotic quantum states of matter and engineering electronic properties. Yet, developments beyond the proof-of-principle level are impeded by the vast size of the configuration space defined by layer combinations and stacking orders. Here we employ a density functional theory (DFT) workflow to calculate interla…
▽ More
Stacking of two-dimensional (2D) materials has emerged as a facile strategy for realising exotic quantum states of matter and engineering electronic properties. Yet, developments beyond the proof-of-principle level are impeded by the vast size of the configuration space defined by layer combinations and stacking orders. Here we employ a density functional theory (DFT) workflow to calculate interlayer binding energies of 8451 homobilayers created by stacking 1052 different monolayers in various configurations. Analysis of the stacking orders in 247 experimentally known van der Waals crystals is used to validate the workflow and determine the criteria for realizable bilayers. For the 2586 most stable bilayer systems, we calculate a range of electronic, magnetic, and vibrational properties, and explore general trends and anomalies. We identify an abundance of bistable bilayers with stacking order-dependent magnetic or electrical polarisation states making them candidates for slidetronics applications.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Type II multiferroic order in two-dimensional transition metal halides from first principles spin-spiral calculations
Authors:
Joachim Sødequist,
Thomas Olsen
Abstract:
We present a computational search for spin spiral ground states in two-dimensional transition metal halides that are experimentally known as van der Waals bonded bulk materials. Such spin spirals break the rotational symmetry of the lattice and lead to polar ground states where the axis of polarization is strongly coupled to the magnetic order (type II multiferroics). We apply the generalized Bloc…
▽ More
We present a computational search for spin spiral ground states in two-dimensional transition metal halides that are experimentally known as van der Waals bonded bulk materials. Such spin spirals break the rotational symmetry of the lattice and lead to polar ground states where the axis of polarization is strongly coupled to the magnetic order (type II multiferroics). We apply the generalized Bloch theorem in conjunction with non-collinear density functional theory calculations to find the spiralling vector that minimizes the energy and then include spin-orbit coupling to calculate the preferred orientation of the spin plane with respect to the spiral vector. We find a wide variety of magnetic orders ranging from ferromagnetic, stripy anti-ferromagnetic, 120$^\circ$ non-collinear structures and incommensurate spin spirals. The latter two introduce polar axes and are found in the majority of materials considered here. The spontaneous polarization is calculated for the incommensurate spin spirals by performing full supercell relaxation including spinorbit coupling and the induced polarization is shown to be strongly dependent on the orientation of the spiral planes. We also test the effect of Hubbard corrections on the results and find that for most materials LDA+U results agree qualitatively with LDA. An exception is the Mn halides, which are found to exhibit incommensurate spin spiral ground states if Hubbard corrections are included whereas bare LDA yields a 120$^\circ$ non-collinear ground state.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Giant gate-tunable renormalization of spin-correlated flat-band states and bandgap in a 2D magnetic insulator
Authors:
Pin Lyu,
Joachim Sødequist,
Xiaoyu Sheng,
Zhizhan Qiu,
Anton Tadich,
Qile Li,
Mark T. Edmonds,
Jesús Redondo,
Martin Švec,
Thomas Olsen,
Jiong Lu
Abstract:
Emergent quantum phenomena in two-dimensional van der Waal (vdW) magnets are largely governed by the interplay between the exchange and Coulomb interactions. The ability to tune the Coulomb interaction in such strongly correlated materials enables the precise control of spin-correlated flat-band states, bandgap (Eg) and unconventional magnetism, all of which are crucial for next-generation spintro…
▽ More
Emergent quantum phenomena in two-dimensional van der Waal (vdW) magnets are largely governed by the interplay between the exchange and Coulomb interactions. The ability to tune the Coulomb interaction in such strongly correlated materials enables the precise control of spin-correlated flat-band states, bandgap (Eg) and unconventional magnetism, all of which are crucial for next-generation spintronics and magnonics applications. Here, we demonstrate a giant gate-tunable renormalization of spin-correlated flat-band states and bandgap in magnetic chromium tribromide (CrBr3) monolayers grown on graphene. Our gate-dependent scanning tunneling spectroscopy (STS) studies reveal that the inter-flat-band spacing and bandgap of CrBr3 can be continuously tuned by 120 meV and 240 meV respectively via electrostatic injection of carriers into the hybrid CrBr3/graphene system, equivalent to the modulation of the Cr on-site Coulomb repulsion energy by 500 meV. This can be attributed to the self-screening of CrBr3 arising from the gate-induced carriers injected into CrBr3, which dominates over the opposite trend from the remote screening of the graphene substrate. Precise tuning of the spin-correlated flat-band states and bandgap in 2D magnets via electrostatic modulation of Coulomb interactions not only provides new strategies for optimizing the spin transport channels but also may exert a crucial influence on the exchange energy and spin-wave gap, which could raise the critical temperature for magnetic order.
△ Less
Submitted 6 December, 2022;
originally announced December 2022.
-
Two-dimensional ferroelectrics from high throughput computational screening
Authors:
Mads Kruse,
Urko Petralanda,
Morten N. Gjerding,
Karsten W. Jacobsen,
Kristian S. Thygesen,
Thomas Olsen
Abstract:
We report a high throughput computational search for two-dimensional ferroelectric materials. The starting point is 252 pyroelectric materials from the computational 2D materials database (C2DB) and from these we identify 64 ferroelectric materials by explicitly constructing adiabatic paths connecting states of reversed polarization. In particular we find 49 materials with in-plane polarization, 8…
▽ More
We report a high throughput computational search for two-dimensional ferroelectric materials. The starting point is 252 pyroelectric materials from the computational 2D materials database (C2DB) and from these we identify 64 ferroelectric materials by explicitly constructing adiabatic paths connecting states of reversed polarization. In particular we find 49 materials with in-plane polarization, 8 materials with out-of-plane polarization and 6 materials with coupled in-plane and out-of-plane polarization. Most of the known 2D ferroelectrics are recovered by the screening and the far majority of the new predicted ferroelectrics are known as bulk van der Waals bonded compounds, which implies that these could be experimentally accessible by direct exfoliation. For roughly 25{\%} of the materials we find a metastable state in the non-polar structure, which could have important consequences for the thermodynamical properties and may imply a first order transition to the polar phase. Finally, we list the magnetic pyroelectrics extracted from the C2DB and focus on the case of VAgP$_2$Se$_6$, which exhibits a three-state switchable polarization vector that is strongly coupled to the magnetic excitation spectrum.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
The level-1 trigger for the SuperCDMS experiment at SNOLAB
Authors:
Jonathan S. Wilson,
Hanno Meyer zu Theenhausen,
Belina von Krosigk,
Elham Azadbakht,
Ray Bunker,
Jeter Hall,
Sten Hansen,
Bruce Hines,
Ben Loer,
Jamieson T. Olsen,
Scott M. Oser,
Richard Partridge,
Matthew Pyle,
Joel Sander,
Bruno Serfass,
David Toback,
Samuel L. Watkins,
Xuji Zhao
Abstract:
The SuperCDMS SNOLAB dark matter search experiment aims to be sensitive to energy depositions down to O(1 eV). This imposes requirements on the resolution, signal efficiency, and noise rejection of the trigger system. To accomplish this, the SuperCDMS level-1 trigger system is implemented in an FPGA on a custom PCB. A time-domain optimal filter algorithm realized as a finite impulse response filte…
▽ More
The SuperCDMS SNOLAB dark matter search experiment aims to be sensitive to energy depositions down to O(1 eV). This imposes requirements on the resolution, signal efficiency, and noise rejection of the trigger system. To accomplish this, the SuperCDMS level-1 trigger system is implemented in an FPGA on a custom PCB. A time-domain optimal filter algorithm realized as a finite impulse response filter provides a baseline resolution of 0.38 times the standard deviation of the noise, $σ_n$, and a 99.9% trigger efficiency for signal amplitudes of 1.1 $σ_n$ in typical noise conditions. Embedded in a modular architecture, flexible trigger logic enables reliable triggering and vetoing in a dead-time-free manner for a variety of purposes and run conditions. The trigger architecture and performance are detailed in this article.
△ Less
Submitted 23 May, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Polarization switching induced by domain wall sliding in two-dimensional ferroelectric monochalcogenides
Authors:
Urko Petralanda,
Thomas Olsen
Abstract:
The ability to switch between distinct states of polarization comprises the defining property of ferroelectrics. However, the microscopic mechanism responsible for switching is not well understood and theoretical estimates based on coherent monodomain switching typically overestimate experimentally determined coercive fields by orders of magnitude. In this work we present a detailed first principl…
▽ More
The ability to switch between distinct states of polarization comprises the defining property of ferroelectrics. However, the microscopic mechanism responsible for switching is not well understood and theoretical estimates based on coherent monodomain switching typically overestimate experimentally determined coercive fields by orders of magnitude. In this work we present a detailed first principles characterization of domain walls (DWs) in two-dimensional ferroelectric GeS, GeSe, SnS and SnSe. In particular, we calculate the formation energies and migration barriers for 180 and 90 DWs, and then derive a general expression for the coercive field assuming that polarization switching is mediated by DW migration. We apply our approach to the materials studied and obtain good agreement with experimental coercive fields. The calculated coercive fields are up to two orders of magnitude smaller than those predicted from coherent monodomain switching in GeSe, SnS and SnSe. Finally, we study the optical properties of the compounds and find that the presence of 180 DWs leads to a significant red shift of the absorption spectrum, implying that the density of DWs may be determined by means of simple optical probes.
△ Less
Submitted 7 November, 2022; v1 submitted 26 April, 2022;
originally announced April 2022.
-
Plane wave implementation of the magnetic force theorem for magnetic exchange constants: Application to bulk Fe, Co and Ni
Authors:
Frederik Durhuus,
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We present a plane wave implementation of the magnetic force theorem, which provides a first principles framework for extracting exchange constants parameterizing a classical Heisenberg model description of magnetic materials. It is shown that the full microscopic exchange tensor may be expressed in terms of the static Kohn-Sham susceptibility tensor and the exchange-correlation magnetic field. Th…
▽ More
We present a plane wave implementation of the magnetic force theorem, which provides a first principles framework for extracting exchange constants parameterizing a classical Heisenberg model description of magnetic materials. It is shown that the full microscopic exchange tensor may be expressed in terms of the static Kohn-Sham susceptibility tensor and the exchange-correlation magnetic field. This formulation allows one to define arbitrary magnetic sites localized to predefined spatial regions, hence rendering the problem of finding Heisenberg parameters independent of any orbital decomposition of the problem. The susceptibility is calculated in a plane wave basis, which allows for systematic convergence with respect to unoccupied bands and spatial representation. We then apply the method to the well-studied problem of calculating adiabatic spin wave spectra for bulk Fe, Co and Ni, finding good agreement with previous calculations. In particular, we utilize the freedom of defining magnetic sites to show that the calculated Heisenberg parameters are robust towards changes in the definition of magnetic sites. This demonstrates that the magnetic sites can be regarded as well-defined and thus asserts the relevance of the Heisenberg model description despite the itinerant nature of the magnetic state.
△ Less
Submitted 11 January, 2023; v1 submitted 8 April, 2022;
originally announced April 2022.
-
Abundance of second order topology in $C_3$ symmetric two-dimensional insulators
Authors:
Joachim Sødequist,
Urko Petralanda,
Thomas Olsen
Abstract:
We have screened 71 two-dimensional (2D) materials with $C_3$ symmetry for non-trivial second order topological order and find that 28 compounds exhibit an obstructed atomic limit (OAL). In the case of $C_3$ symmetry, the second order topology can be calculated from bulk symmetry indicator invariants, which predict the value of fractional corner charges in symmetry conserving nanoflakes. The proce…
▽ More
We have screened 71 two-dimensional (2D) materials with $C_3$ symmetry for non-trivial second order topological order and find that 28 compounds exhibit an obstructed atomic limit (OAL). In the case of $C_3$ symmetry, the second order topology can be calculated from bulk symmetry indicator invariants, which predict the value of fractional corner charges in symmetry conserving nanoflakes. The procedure is exemplified by MoS$_2$ in the H-phase, which constitutes a generic example of a 2D OAL material and the predicted fractional corner charges is verified by direct calculations of nanoflakes with armchair edges. We also determine the bulk topological polarization, which always lead to gapless states at zigzag edges and thus deteriorates the concept of fractional corner charges in nanoflakes with zigzag edges that are typically more stable that armchair flakes. We then consider the case of TiCl$_2$, which has vanishing polarization as well as an OAL and we verify that the edge states of nanoflakes with zigzag edges may indeed by passivated such that the edges remain insulating and the corner charges are well defined. For the 28 OAL materials we find that 16 have vanishing polarization and these materials thus constitute a promising starting point for experimental verification of second order topology in a 2D material.
△ Less
Submitted 16 November, 2022; v1 submitted 8 April, 2022;
originally announced April 2022.
-
Probabilistic forecasts of wind power generation in regions with complex topography using deep learning methods: An Arctic case
Authors:
Odin Foldvik Eikeland,
Finn Dag Hovem,
Tom Eirik Olsen,
Matteo Chiesa,
Filippo Maria Bianchi
Abstract:
The energy market relies on forecasting capabilities of both demand and power generation that need to be kept in dynamic balance. Today, when it comes to renewable energy generation, such decisions are increasingly made in a liberalized electricity market environment, where future power generation must be offered through contracts and auction mechanisms, hence based on forecasts. The increased sha…
▽ More
The energy market relies on forecasting capabilities of both demand and power generation that need to be kept in dynamic balance. Today, when it comes to renewable energy generation, such decisions are increasingly made in a liberalized electricity market environment, where future power generation must be offered through contracts and auction mechanisms, hence based on forecasts. The increased share of highly intermittent power generation from renewable energy sources increases the uncertainty about the expected future power generation. Point forecast does not account for such uncertainties. To account for these uncertainties, it is possible to make probabilistic forecasts. This work first presents important concepts and approaches concerning probabilistic forecasts with deep learning. Then, deep learning models are used to make probabilistic forecasts of day-ahead power generation from a wind power plant located in Northern Norway. The performance in terms of obtained quality of the prediction intervals is compared for different deep learning models and sets of covariates. The findings show that the accuracy of the predictions improves when historical data on measured weather and numerical weather predictions (NWPs) were included as exogenous variables. This allows the model to auto-correct systematic biases in the NWPs using the historical measurement data. Using only NWPs, or only measured weather as exogenous variables, worse prediction performances were obtained.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Magnons in antiferromagnetic bcc-Cr and Cr$_2$O$_3$ from time-dependent density functional theory
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We apply time-dependent density functional theory to calculate the transverse magnetic susceptibility of bcc-Cr and Cr$_2$O$_3$, which constitute prototypical examples of antiferromagnets with itinerant and localized magnetic moments respectively. The exchange-correlation kernel is rescaled in order to enforce the Goldstone condition and the magnon dispersion relations are extracted based on a sym…
▽ More
We apply time-dependent density functional theory to calculate the transverse magnetic susceptibility of bcc-Cr and Cr$_2$O$_3$, which constitute prototypical examples of antiferromagnets with itinerant and localized magnetic moments respectively. The exchange-correlation kernel is rescaled in order to enforce the Goldstone condition and the magnon dispersion relations are extracted based on a symmetry analysis relying on the generalized Onsager relation. Doing so, our calculations yield the characteristic linear magnon dispersion of antiferromagnets in the long wavelength limit. In the case of Cr$_2$O$_3$, we find that the adiabatic local density approximation yields a good qualitative agreement with the measured dispersion, but overestimates the magnon velocity and bandwidth by a factor of two. Including a Hubbard correction improves the magnon velocity, but at the expense of the overall qualitative agreement with the experimental magnon dispersion. For bcc-Cr we find a sharp acoustic magnon mode at low energies with a velocity in agreement with previously reported values. At higher energies, the acoustic magnon mode becomes subject to strong Landau dam** and rapidly vanishes once it enters the Stoner continuum. In addition to the acoustic magnon mode, we also observe an additional collective mode along the $Γ\rightarrow\mathrm{R}$ direction with an energy of $\sim$ 1 eV, which is located inside the Stoner continuum, but appears to elude the effect of Landau dam**.
△ Less
Submitted 20 July, 2022; v1 submitted 9 March, 2022;
originally announced March 2022.
-
Influence of static correlation on the magnon dynamics of an itinerant ferromagnet with competing exchange interactions -- a first principles study of MnBi
Authors:
Thorbjørn Skovhus,
Thomas Olsen,
Henrik M. Rønnow
Abstract:
We present first principles calculations of the dynamic susceptibility in strained and doped ferromagnetic MnBi using time-dependent density functional theory. In spite of being a metal, MnBi exhibits signatures of strong correlation and a proper description in the framework of density functional theory requires Hubbard corrections to the Mn $d$-orbitals. To permit calculations of the dynamic susc…
▽ More
We present first principles calculations of the dynamic susceptibility in strained and doped ferromagnetic MnBi using time-dependent density functional theory. In spite of being a metal, MnBi exhibits signatures of strong correlation and a proper description in the framework of density functional theory requires Hubbard corrections to the Mn $d$-orbitals. To permit calculations of the dynamic susceptibility with Hubbard corrections applied to the ground state electronic structure, we use a consistent rescaling of the exchange-correlation kernel maintaining the delicate balance between the magnon dispersion and the Stoner continuum. We find excellent agreement with the experimentally observed magnon dispersion for pristine MnBi and show that the material undergoes a phase transition to helical order under application of either do** or strain. The presented methodology paves the way for future LR-TDDFT studies of magnetic phase transitions, also for the wide range of materials with pronounced static correlation effects that are not accounted for at the LDA level.
△ Less
Submitted 11 February, 2022; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Robust-by-Design Plans for Multi-Robot Pursuit-Evasion
Authors:
Trevor Olsen,
Nicholas M. Stiffler,
Jason M. O'Kane
Abstract:
This paper studies a multi-robot visibility-based pursuit-evasion problem in which a group of pursuer robots are tasked with detecting an evader within a two dimensional polygonal environment. The primary contribution is a novel formulation of the pursuit-evasion problem that modifies the pursuers' objective by requiring that the evader still be detected, even in spite of the failure of any single…
▽ More
This paper studies a multi-robot visibility-based pursuit-evasion problem in which a group of pursuer robots are tasked with detecting an evader within a two dimensional polygonal environment. The primary contribution is a novel formulation of the pursuit-evasion problem that modifies the pursuers' objective by requiring that the evader still be detected, even in spite of the failure of any single pursuer robot. This novel constraint, whereby two pursuers are required to detect an evader, has the benefit of providing redundancy to the search, should any member of the team become unresponsive, suffer temporary sensor disruption/failure, or otherwise become incapacitated. Existing methods, even those that are designed to respond to failures, rely on the pursuers to replan and update their search pattern to handle such occurrences. In contrast, the proposed formulation produces plans that are inherently tolerant of some level of disturbance. Building upon this new formulation, we introduce an augmented data structure for encoding the problem state and a novel sampling technique to ensure that the generated plans are robust to failures of any single pursuer robot. An implementation and simulation results illustrating the effectiveness of this approach are described.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Unified Treatment of Magnons and Excitons in Monolayer CrI$_3$ from Many-Body Perturbation Theory
Authors:
Thomas Olsen
Abstract:
We present first principles calculations of the two-particle excitation spectrum of CrI$_3$ using many-body perturbation theory including spin-orbit coupling. Specifically, we solve the Bethe-Salpeter equation, which is equivalent to summing up all ladder diagrams with static screening and it is shown that excitons as well as magnons can be extracted seamlessly from the calculations. The resulting…
▽ More
We present first principles calculations of the two-particle excitation spectrum of CrI$_3$ using many-body perturbation theory including spin-orbit coupling. Specifically, we solve the Bethe-Salpeter equation, which is equivalent to summing up all ladder diagrams with static screening and it is shown that excitons as well as magnons can be extracted seamlessly from the calculations. The resulting optical absorption spectrum as well as the magnon dispersion agree very well with recent measurements and we extract the amplitude for optical excitation of magnons resulting from spin-orbit interactions. Importantly, the results do not rely on any assumptions on the microscopic magnetic interactions such as Dzyaloshinskii-Moriya (DM), Kitaev or biquadratic interactions and we obtain a model independent estimate of the gap between acoustic and optical magnons of 0.3 meV. In addition, we resolve the magnon wavefunction in terms of band transitions and show that the magnon carries a spin that is significantly smaller than $\hbar$. This highlights the importance of terms that do not commute with $S^z$ in any Heisenberg model description.
△ Less
Submitted 5 July, 2021;
originally announced July 2021.
-
Spread balanced Wannier functions: Robust and automatable orbital localization
Authors:
Pietro F. Fontana,
Ask H. Larsen,
Thomas Olsen,
Kristian S. Thygesen
Abstract:
We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furt…
▽ More
We introduce a new type of Wannier functions (WFs) obtained by minimizing the conventional spread functional with a penalty term proportional to the variance of the spread distribution. This modified Wannierisation scheme is less prone to produce ineffective solutions featuring one or several poorly localized orbitals, making it well suited for complex systems or high-throughput applications. Furthermore, we propose an automatable protocol for selecting the initial guess and determine the optimal number of bands (or equivalently WFs) for the localization algorithm. The improved performance and robustness of the approach is demonstrated for a diverse set of test systems including the NV center in diamond, metal slabs with atomic adsorbates, spontaneous polarization of ferroelectrics and 30 inorganic monolayer materials comprising both metals and semiconductors. The methods are implemented in Python as part of the Atomic Simulation Environment (ASE).
△ Less
Submitted 7 November, 2021; v1 submitted 4 July, 2021;
originally announced July 2021.
-
Synthesis of Frame Field-Aligned Multi-Laminar Structures
Authors:
Florian Cyril Stutz,
Tim Felle Olsen,
Jeroen Peter Groen,
Niels Aage,
Ole Sigmund,
Justin Solomon,
Jakob Andreas Bærentzen
Abstract:
In the field of topology optimization, the homogenization approach has been revived as an important alternative to the established, density-based methods because it can represent the microstructural design at a much finer length-scale than the computational grid. The optimal microstructure for a single load case is an orthogonal rank-3 laminate. A rank-3 laminate can be described in terms of frame…
▽ More
In the field of topology optimization, the homogenization approach has been revived as an important alternative to the established, density-based methods because it can represent the microstructural design at a much finer length-scale than the computational grid. The optimal microstructure for a single load case is an orthogonal rank-3 laminate. A rank-3 laminate can be described in terms of frame fields, which are also an important tool for mesh generation in both 2D and 3D.
We propose a method for generating multi-laminar structures from frame fields. Rather than relying on integrative approaches that find a parametrization based on the frame field, we find stream surfaces, represented as point clouds aligned with frame vectors, and we solve an optimization problem to find well-spaced collections of such stream surfaces. The stream surface tracing is unaffected by the presence of singularities outside the region of interest. Neither stream surface tracing nor selecting well-spaced surface rely on combed frame fields.
In addition to stream surface tracing and selection, we provide two methods for generating structures from stream surface collections. One of these methods produces volumetric solids by summing basis functions associated with each point of the stream surface collection. The other method reinterprets point sampled stream surfaces as a spatial twist continuum and produces a hexahedralization by dualizing a graph representing the structure.
We demonstrate our methods on several frame fields produced using the homogenization approach for topology optimization, boundary-aligned, algebraic frame fields, and frame fields computed from closed-form expressions.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Rapid Recovery from Robot Failures in Multi-Robot Visibility-Based Pursuit-Evasion
Authors:
Trevor Olsen,
Nicholas M. Stiffler,
Jason M. O'Kane
Abstract:
This paper addresses the visibility-based pursuit-evasion problem where a team of pursuer robots operating in a two-dimensional polygonal space seek to establish visibility of an arbitrarily fast evader. This is a computationally challenging task for which the best known complete algorithm takes time doubly exponential in the number of robots. However, recent advances that utilize sampling-based m…
▽ More
This paper addresses the visibility-based pursuit-evasion problem where a team of pursuer robots operating in a two-dimensional polygonal space seek to establish visibility of an arbitrarily fast evader. This is a computationally challenging task for which the best known complete algorithm takes time doubly exponential in the number of robots. However, recent advances that utilize sampling-based methods have shown progress in generating feasible solutions. An aspect of this problem that has yet to be explored concerns how to ensure that the robots can recover from catastrophic failures which leave one or more robots unexpectedly incapable of continuing to contribute to the pursuit of the evader. To address this issue, we propose an algorithm that can rapidly recover from catastrophic failures. When such failures occur, a replanning occurs, leveraging both the information retained from the previous iteration and the partial progress of the search completed before the failure to generate a new motion strategy for the reduced team of pursuers. We describe an implementation of this algorithm and provide quantitative results that show that the proposed method is able to recover from robot failures more rapidly than a baseline approach that plans from scratch.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Dynamic transverse magnetic susceptibility in the projector augmented-wave method. Application to Fe, Ni, and Co
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We present a first principles implementation of the dynamic transverse magnetic susceptibility in the framework of linear response time-dependent density functional theory. The dynamic susceptibility allows one to obtain the magnon dispersion as well as magnon lifetimes for a particular material, which strongly facilitates the interpretation of inelastic neutron scattering experiments as well as o…
▽ More
We present a first principles implementation of the dynamic transverse magnetic susceptibility in the framework of linear response time-dependent density functional theory. The dynamic susceptibility allows one to obtain the magnon dispersion as well as magnon lifetimes for a particular material, which strongly facilitates the interpretation of inelastic neutron scattering experiments as well as other spectroscopic techniques. We apply the method to Fe, Ni, and Co and perform a thorough convergence analysis with respect the basis set size, $k$-point sampling, spectral smearing and unoccupied bands. In particular, it is shown that while the gap error (acoustic magnon energy at $\mathbf{q}=\mathbf{0}$) is highly challenging to converge, the spin-wave stiffness and the dispersion relation itself are much less sensitive to convergence parameters. Our final results agrees well with experimentally extracted magnon dispersion relations except for Ni, where it is well-known that the exchange splitting energy is poorly represented in the local density approximation. We also find good agreement with previous first principles calculations and explain how differences in the calculated dispersion relations can arise from subtle differences in computational approaches.
△ Less
Submitted 12 May, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
Magnetic anisotropy and exchange interactions of two-dimensional FePS$_3$, NiPS$_3$ and MnPS$_3$ from first principles calculations
Authors:
Thomas Olsen
Abstract:
The van der Waals bonded transition metal phosphorous trichalcogenides FePS$_3$, NiPS$_3$ and MnPS$_3$ have recently attracted renewed attention due to the possibility of exfoliating them into their monolayers. Although the three compounds have similar electronic structure, the magnetic structure differs due to subtle differences in exchange and magnetic anisotropy and the materials thus comprise…
▽ More
The van der Waals bonded transition metal phosphorous trichalcogenides FePS$_3$, NiPS$_3$ and MnPS$_3$ have recently attracted renewed attention due to the possibility of exfoliating them into their monolayers. Although the three compounds have similar electronic structure, the magnetic structure differs due to subtle differences in exchange and magnetic anisotropy and the materials thus comprise a unique playground for studying different aspects of magnetism in 2D. Here we calculate the exchange and anisotropy parameters of the three materials from first principles paying special attention to the choice of Hubbard parameter U. We find a strong dependence of the choice of U and show that the calculated Néel temperature of FePS$_3$ varies by an order of magnitude over commonly applied values of U for the Fe $d$-orbitals. The results are compared with parameters fitted to experimental spin-wave spectra of the bulk materials and we find excellent agreement between the exchange constants when a proper value of U is chosen. However, the anisotropy parameters are severely underestimated by DFT and we discuss possible origins of this discrepancy.
△ Less
Submitted 7 March, 2021;
originally announced March 2021.
-
A Visibility Roadmap Sampling Approach for a Multi-Robot Visibility-Based Pursuit-Evasion Problem
Authors:
Trevor Olsen,
Anne M. Tumlin,
Nicholas M. Stiffler,
Jason M. O'Kane
Abstract:
Given a two-dimensional polygonal space, the multi-robot visibility-based pursuit-evasion problem tasks several pursuer robots with the goal of establishing visibility with an arbitrarily fast evader. The best known complete algorithm for this problem takes time doubly exponential in the number of robots. However, sampling-based techniques have shown promise in generating feasible solutions in the…
▽ More
Given a two-dimensional polygonal space, the multi-robot visibility-based pursuit-evasion problem tasks several pursuer robots with the goal of establishing visibility with an arbitrarily fast evader. The best known complete algorithm for this problem takes time doubly exponential in the number of robots. However, sampling-based techniques have shown promise in generating feasible solutions in these scenarios. One of the primary drawbacks to employing existing sampling-based methods is that existing algorithms have long execution times and high failure rates for complex environments. This paper addresses that limitation by proposing a new algorithm that takes an environment as its input and returns a joint motion strategy which ensures that the evader is captured by one of the pursuers. Starting with a single pursuer, we sequentially construct Sample-Generated Pursuit-Evasion Graphs to create such a joint motion strategy. This sequential graph structure ensures that our algorithm will always terminate with a solution, regardless of the complexity of the environment. We describe an implementation of this algorithm and present quantitative results that show significant improvement in comparison to the existing algorithm.
△ Less
Submitted 8 April, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Recent Progress of the Computational 2D Materials Database (C2DB)
Authors:
M. N. Gjerding,
A. Taghizadeh,
A. Rasmussen,
S. Ali,
F. Bertoldo,
T. Deilmann,
U. P. Holguin,
N. R. Knøsgaard,
M. Kruse,
S. Manti,
T. G. Pedersen,
T. Skovhus,
M. K. Svendsen,
J. J. Mortensen,
T. Olsen,
K. S. Thygesen
Abstract:
The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayer…
▽ More
The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayers in various stacking configurations, native point defects in semiconducting monolayers, and chalcogen/halogen Janus monolayers. The new properties include exfoliation energies, Bader charges, spontaneous polarisations, Born charges, infrared polarisabilities, piezoelectric tensors, band topology invariants, exchange couplings, Raman- and second harmonic generation spectra. We also describe refinements of the employed material classification schemes, upgrades of the computational methodologies used for property evaluations, as well as significant enhancements of the data documentation and provenance. Finally, we explore the performance of Gaussian process-based regression for efficient prediction of mechanical and electronic materials properties. The combination of open access, detailed documentation, and extremely rich materials property data sets make the C2DB a unique resource that will advance the science of atomically thin materials.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Mirror Chern numbers in the hybrid Wannier representation
Authors:
Tomáš Rauch,
Thomas Olsen,
David Vanderbilt,
Ivo Souza
Abstract:
The topology of electronic states in band insulators with mirror symmetry can be classified in two different ways. One is in terms of the mirror Chern number, an integer that counts the number of protected Dirac cones in the Brillouin zone of high-symmetry surfaces. The other is via a $\mathbb{Z}_2$ index that distinguishes between systems that have a nonzero quantized orbital magnetoelectric coup…
▽ More
The topology of electronic states in band insulators with mirror symmetry can be classified in two different ways. One is in terms of the mirror Chern number, an integer that counts the number of protected Dirac cones in the Brillouin zone of high-symmetry surfaces. The other is via a $\mathbb{Z}_2$ index that distinguishes between systems that have a nonzero quantized orbital magnetoelectric coupling ("axion-odd"), and those that do not ("axion-even"); this classification can also be induced by other symmetries in the magnetic point group, including time reversal and inversion. A systematic characterization of the axion $\mathbb{Z}_2$ topology has previously been obtained by representing the valence states in terms of hybrid Wannier functions localized along one chosen crystallographic direction, and inspecting the associated Wannier band structure. Here we focus on mirror symmetry, and extend that characterization to the mirror Chern number. We choose the direction orthogonal to the mirror plane as the Wannierization direction, and show that the mirror Chern number can be determined from the winding numbers of the touching points between Wannier bands on mirror-invariant planes, and from the Chern numbers of flat bands pinned to those planes. In this representation, the relation between the mirror Chern number and the axion $\mathbb{Z}_2$ index is readily established. The formalism is illustrated by means of $\textit{ab initio}$ calculations for SnTe in the monolayer and bulk forms, complemented by tight-binding calculations for a toy model.
△ Less
Submitted 7 May, 2021; v1 submitted 26 January, 2021;
originally announced January 2021.
-
Oxygen vacancies nucleate charged domain walls in ferroelectrics
Authors:
Urko Petralanda,
Mads Kruse,
Hugh Simons,
Thomas Olsen
Abstract:
We study the influence of oxygen vacancies on the formation of charged 180$^\circ$ domain walls in ferroelectric BaTiO$_3$ using first principles calculations. We show that it is favorable for vacancies to assemble in crystallographic planes, and that such clustering is accompanied by the formation of a charged domain wall. The domain wall has negative bound charge, which compensates the nominal p…
▽ More
We study the influence of oxygen vacancies on the formation of charged 180$^\circ$ domain walls in ferroelectric BaTiO$_3$ using first principles calculations. We show that it is favorable for vacancies to assemble in crystallographic planes, and that such clustering is accompanied by the formation of a charged domain wall. The domain wall has negative bound charge, which compensates the nominal positive charge of the vacancies and leads to a vanishing density of free charge at the wall. This is in contrast to the positively charged domain walls, which are nearly completely compensated by free charge from the bulk. The results thus explain the experimentally observed difference in electronic conductivity of the two types of domain walls, as well as the generic prevalence of charged domain walls in ferroelectrics. Moreover, the explicit demonstration of vacancy driven domain wall formation implies that specific charged domain wall configurations may be realized by bottom-up design for use in domain wall based information processing.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Shot-noise limited, supercontinuum based optical coherence tomography
Authors:
Shreesha Rao D. S.,
Mikkel Jensen,
Lars Grüner-Nielsen,
Jesper Toft Olsen,
Peter Heiduschka,
Björn Kemper,
Jürgen Schnekenburger,
Martin Glud,
Mette Mogensen,
Niels Møller Israelsen,
Ole Bang
Abstract:
We present the first demonstration of shot-noise limited supercontinuum-based spectral domain optical coherence tomography (SD-OCT) with axial resolution of 5.9 $μ$m at a center wavelength of 1370 nm. Current supercontinuum-based SD-OCT systems cannot be operated in the shot-noise limited detection regime because of severe pulse-to-pulse relative intensity noise of the supercontinuum source. To ov…
▽ More
We present the first demonstration of shot-noise limited supercontinuum-based spectral domain optical coherence tomography (SD-OCT) with axial resolution of 5.9 $μ$m at a center wavelength of 1370 nm. Current supercontinuum-based SD-OCT systems cannot be operated in the shot-noise limited detection regime because of severe pulse-to-pulse relative intensity noise of the supercontinuum source. To overcome this disadvantage we have developed a low-noise supercontinuum source based on an all-normal dispersion (ANDi) fiber, pumped by a femtosecond laser. The noise performance of our 90 MHz ANDi supercontinuum source is compared to that of two commercial sources operating at 80 and 320 MHz repetition rate. We show that the low noise of the ANDi supercontinuum source improves the OCT images significantly in terms of both higher contrast, better sensitivity, and improved penetration. From SD-OCT imaging of skin, retina, and multi-layer stacks we conclude that supercontinuum-based SD-OCT can enter the domain of shot-noise limited detection.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
Anisotropic properties of monolayer 2D materials: an overview from the C2DB database
Authors:
Luca Vannucci,
Urko Petralanda,
Asbjørn Rasmussen,
Thomas Olsen,
Kristian S. Thygesen
Abstract:
We analyze the occurrence of in-plane anisotropy in the electronic, magnetic, elastic and transport properties of more than one thousand 2D materials from the C2DB database. We identify hundreds of anisotropic materials and classify them according to their point group symmetry and degree of anisotropy. A statistical analysis reveals that a lower point group symmetry and a larger amount of differen…
▽ More
We analyze the occurrence of in-plane anisotropy in the electronic, magnetic, elastic and transport properties of more than one thousand 2D materials from the C2DB database. We identify hundreds of anisotropic materials and classify them according to their point group symmetry and degree of anisotropy. A statistical analysis reveals that a lower point group symmetry and a larger amount of different elements in the structure favour all types of anisotropies, which could be relevant for future materials design approaches. Besides, we identify novel compounds, predicted to be easily exfoliable from a parent bulk compound, with anisotropies that largely outscore those of already known 2D materials. Our findings provide a comprehensive reference for future studies of anisotropic response in atomically-thin crystals and point to new previously unexplored materials for the next generation of anisotropic 2D devices.
△ Less
Submitted 19 August, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
-
Heterogeneous Optoelectronic Characteristics of Si Micropillar Arrays Fabricated by Metal-Assisted Chemical Etching
Authors:
Yang Qian,
David J. Magginetti,
Seokmin Jeon,
Yohan Yoon,
Tony L. Olsen,
Maoji Wang,
Jordan M. Gerton,
Heayoung P. Yoon
Abstract:
Recent progress achieved in metal-assisted chemical etching (MACE) has enabled the production of high-quality micropillar arrays for various optoelectronic applications. Si micropillars produced by MACE often show a porous Si/SiOx shell on crystalline pillar cores introduced by local electrochemical reactions. In this paper, we report the distinct optoelectronic characteristics of the porous Si/Si…
▽ More
Recent progress achieved in metal-assisted chemical etching (MACE) has enabled the production of high-quality micropillar arrays for various optoelectronic applications. Si micropillars produced by MACE often show a porous Si/SiOx shell on crystalline pillar cores introduced by local electrochemical reactions. In this paper, we report the distinct optoelectronic characteristics of the porous Si/SiOx shell correlated to their chemical compositions. Local photoluminescent (PL) images obtained with an immersion oil objective lens in confocal microscopy show a red emission peak (about 650 nm) along the perimeter of the pillars that is threefold stronger compared to their center. On the basis of our analysis, we find an unexpected PL increase (about 540 nm) at the oil/shell interface. We suggest that both PL enhancements are mainly attributed to the porous structures, a similar behavior observed in previous MACE studies. Surface potential maps simultaneously recorded with topography reveal a significantly high surface potential on the sidewalls of MACE-synthesized pillars (+0.5 V), which is restored to the level of planar Si control (-0.5 V) after removing SiOx in hydrofluoric acid. These distinct optoelectronic characteristics of the Si/SiOx shell can be beneficial for various sensor architectures.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Gapless hinge states from adiabatic pum** of axion coupling
Authors:
Thomas Olsen,
Tomáš Rauch,
David Vanderbilt,
Ivo Souza
Abstract:
We demonstrate that chiral hinge modes naturally emerge in insulating crystals undergoing a slow cyclic evolution that changes the Chern-Simons axion angle $θ$ by $2π$. This happens when the surface (not just the bulk) returns to its initial state at the end of the cycle, in which case it must pass through a metallic state to dispose of the excess quantum of surface anomalous Hall conductivity pum…
▽ More
We demonstrate that chiral hinge modes naturally emerge in insulating crystals undergoing a slow cyclic evolution that changes the Chern-Simons axion angle $θ$ by $2π$. This happens when the surface (not just the bulk) returns to its initial state at the end of the cycle, in which case it must pass through a metallic state to dispose of the excess quantum of surface anomalous Hall conductivity pumped from the bulk. If two adjacent surfaces become metallic at different points along the cycle, there is an interval in which they are in topologically distinct insulating states, with chiral modes propagating along the connecting hinge. We illustrate these ideas for a tight-binding model consisting of coupled layers of the Haldane model with alternating parameters. The surface topology is determined in a slab geometry using two different markers, surface anomalous Hall conductivity and surface-localized charge pum** (flow of surface-localized Wannier bands), and we find that both correctly predict the appearance of gapless hinge modes in a rod geometry. When viewing the axion pump as a four-dimensional (4D) crystal with one synthetic dimension, the hinge modes trace Fermi arcs in the Brillouin zone of the 2D hinge connecting a pair of 3D surfaces of the 4D crystal.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
High throughput computational screening for two-dimensional magnetic materials based on experimental databases of three-dimensional compounds
Authors:
Daniele Torelli,
Hadeel Moustafa,
Karsten W. Jacobsen,
Thomas Olsen
Abstract:
We perform a computational screening for two-dimensional magnetic materials based on experimental bulk compounds present in the Inorganic Crystal Structure Database and Crystallography Open Database. A recently proposed geometric descriptor is used to extract materials that are exfoliable into two-dimensional derivatives and we find 85 ferromagnetic and 61 anti-ferromagnetic materials for which we…
▽ More
We perform a computational screening for two-dimensional magnetic materials based on experimental bulk compounds present in the Inorganic Crystal Structure Database and Crystallography Open Database. A recently proposed geometric descriptor is used to extract materials that are exfoliable into two-dimensional derivatives and we find 85 ferromagnetic and 61 anti-ferromagnetic materials for which we obtain magnetic exchange and anisotropy parameters using density functional theory. For the easy-axis ferromagnetic insulators we calculate the Curie temperature based on classical Monte Carlo simulations of anisotropic Heisenberg models. We find good agreement with the experimentally reported Curie temperatures of known 2D ferromagnets and identify 10 potentially exfoliable two-dimensional ferromagnets that have not been reported previously. In addition, we find 18 easy-axis anti-ferromagnetic insulators with several compounds exhibiting very strong exchange coupling and magnetic anisotropy.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Minimum Wiener Index of Triangulations and Quadrangulations
Authors:
Éva Czabarka,
Trevor Olsen,
Stephen Smith,
László A. Székely
Abstract:
The Wiener index of a connected graph is the sum of the distances between all unordered pairs of vertices. We provide formulae for the minimum Wiener index of simple triangulations and quadrangulations with connectivity at least $c$, and provide the extremal structures, which attain those values. Our main tool is setting upper bounds for the maximum degree in highly connected triangulations and qu…
▽ More
The Wiener index of a connected graph is the sum of the distances between all unordered pairs of vertices. We provide formulae for the minimum Wiener index of simple triangulations and quadrangulations with connectivity at least $c$, and provide the extremal structures, which attain those values. Our main tool is setting upper bounds for the maximum degree in highly connected triangulations and quadrangulations.
△ Less
Submitted 21 December, 2021; v1 submitted 8 March, 2020;
originally announced March 2020.
-
Proximity in Triangulations and Quadrangulations
Authors:
Éva Czabarka,
Peter Dankelmann,
Trevor Olsen,
László A. Székely
Abstract:
Let $ G $ be a connected graph. If $\barσ(v)$ denotes the arithmetic mean of the distances from $v$ to all other vertices of $G$, then the proximity, $π(G)$, of $G$ is defined as the smallest value of $\barσ(v)$ over all vertices $v$ of $G$. We give upper bounds for the proximity of simple triangulations and quadrangulations of given order and connectivity. We also construct simple triangulations…
▽ More
Let $ G $ be a connected graph. If $\barσ(v)$ denotes the arithmetic mean of the distances from $v$ to all other vertices of $G$, then the proximity, $π(G)$, of $G$ is defined as the smallest value of $\barσ(v)$ over all vertices $v$ of $G$. We give upper bounds for the proximity of simple triangulations and quadrangulations of given order and connectivity. We also construct simple triangulations and quadrangulations of given order and connectivity that match the upper bounds asymptotically and are likely optimal.
△ Less
Submitted 29 April, 2022; v1 submitted 23 January, 2020;
originally announced January 2020.
-
Conductance of quantum spin Hall edge states from first principles: the critical role of magnetic impurities and inter-edge scattering
Authors:
Luca Vannucci,
Thomas Olsen,
Kristian S. Thygesen
Abstract:
The outstanding transport properties expected at the edge of two-dimensional time-reversal invariant topological insulators have proven to be challenging to realize experimentally, and have so far only been demonstrated in very short devices. In search for an explanation to this puzzling observation, we here report a full first-principles calculation of topologically protected transport at the edg…
▽ More
The outstanding transport properties expected at the edge of two-dimensional time-reversal invariant topological insulators have proven to be challenging to realize experimentally, and have so far only been demonstrated in very short devices. In search for an explanation to this puzzling observation, we here report a full first-principles calculation of topologically protected transport at the edge of novel quantum spin Hall insulators - specifically, Bismuth and Antimony halides - based on the non-equilibrium Green's functions formalism. Our calculations unravel two different scattering mechanisms that may affect two-dimensional topological insulators, namely time-reversal symmetry breaking at vacancy defects and inter-edge scattering mediated by multiple co-operating impurities, possibly non-magnetic. We discuss their drastic consequences for typical non-local transport measurements as well as strategies to mitigate their negative impact. Finally, we provide an instructive comparison of the transport properties of topologically protected edge states to those of the trivial edge states in MoS$_2$ ribbons. Although we focus on a few specific cases (in terms of materials and defect types) our results should be representative for the general case and thus have significance beyond the systems studied here.
△ Less
Submitted 19 March, 2020; v1 submitted 13 January, 2020;
originally announced January 2020.
-
First Principles Heisenberg Models of 2D magnetic materials: The Importance of Quantum Corrections to the Exchange Coupling
Authors:
Daniele Torelli,
Thomas Olsen
Abstract:
Magnetic materials are typically described in terms of the Heisenberg model, which provides an accurate account of thermodynamic properties when combined with first principles calculations. This approach is usually based on an energy map** between density functional theory and a classical Heisenberg model. However, for two-dimensional systems the eigenenergies of the Heisenberg model may differ…
▽ More
Magnetic materials are typically described in terms of the Heisenberg model, which provides an accurate account of thermodynamic properties when combined with first principles calculations. This approach is usually based on an energy map** between density functional theory and a classical Heisenberg model. However, for two-dimensional systems the eigenenergies of the Heisenberg model may differ significantly from the classical approximation, which leads to modified expressions for exchange parameters. Here we demonstrate that density functional theory yields local magnetic moments that are in accordance with strongly correlated anti-ferromagnetic eigenstates of the Heisenberg Hamiltonian. This implies that density functional theory provides a description of these states that conforms with the quantum mechanical eigenstates of the model. We then provide expressions for exchange parameters based on a proper eigenstate map** to the Heisenberg model and find that they are typically reduced by 10 % compared to a classical analysis. Finally, we calculate the corrections to critical temperature for magnetic ordering for a previously predicted set of two-dimensional ferromagnetic insulators and find that the inclusion of quantum effects may reduce the predictions of critical temperatures by up to 7 %.
△ Less
Submitted 25 March, 2020; v1 submitted 11 December, 2019;
originally announced December 2019.
-
Augmenting the Pathology Lab: An Intelligent Whole Slide Image Classification System for the Real World
Authors:
Julianna D. Ianni,
Rajath E. Soans,
Sivaramakrishnan Sankarapandian,
Ramachandra Vikas Chamarthi,
Devi Ayyagari,
Thomas G. Olsen,
Michael J. Bonham,
Coleman C. Stavish,
Kiran Motaparthi,
Clay J. Cockerell,
Theresa A. Feeser,
Jason B. Lee
Abstract:
Standard of care diagnostic procedure for suspected skin cancer is microscopic examination of hematoxylin \& eosin stained tissue by a pathologist. Areas of high inter-pathologist discordance and rising biopsy rates necessitate higher efficiency and diagnostic reproducibility. We present and validate a deep learning system which classifies digitized dermatopathology slides into 4 categories. The s…
▽ More
Standard of care diagnostic procedure for suspected skin cancer is microscopic examination of hematoxylin \& eosin stained tissue by a pathologist. Areas of high inter-pathologist discordance and rising biopsy rates necessitate higher efficiency and diagnostic reproducibility. We present and validate a deep learning system which classifies digitized dermatopathology slides into 4 categories. The system is developed using 5,070 images from a single lab, and tested on an uncurated set of 13,537 images from 3 test labs, using whole slide scanners manufactured by 3 different vendors. The system's use of deep-learning-based confidence scoring as a criterion to consider the result as accurate yields an accuracy of up to 98\%, and makes it adoptable in a real-world setting. Without confidence scoring, the system achieved an accuracy of 78\%. We anticipate that our deep learning system will serve as a foundation enabling faster diagnosis of skin cancer, identification of cases for specialist review, and targeted diagnostic classifications.
△ Less
Submitted 24 September, 2019;
originally announced September 2019.
-
Theory and simulations of critical temperatures in CrI3 and other 2D materials: Easy-axis magnetic order and easy-plane Kosterlitz-Thouless transitions
Authors:
Thomas Olsen
Abstract:
The recent observations of ferromagnetic order in several two-dimensional (2D) materials have generated an enormous interest in the physical mechanisms underlying 2D magnetism. In the present prospective article we show that Density Functional Theory (DFT) combined with either classical Monte Carlo simulations or renormalized spin-wave theory can predict Curie temperatures for ferromagnetic insula…
▽ More
The recent observations of ferromagnetic order in several two-dimensional (2D) materials have generated an enormous interest in the physical mechanisms underlying 2D magnetism. In the present prospective article we show that Density Functional Theory (DFT) combined with either classical Monte Carlo simulations or renormalized spin-wave theory can predict Curie temperatures for ferromagnetic insulators that are in quantitative agreement with experiment. The case of materials with in-plane anisotropy is then discussed and it is argued that finite size effects may lead to observable magnetic order in macroscopic samples even if long range magnetic order is forbidden by the Mermin-Wagner theorem.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Accurate ground state- and quasiparticle energies: beyond the RPA and GW methods with adiabatic exchange-correlation kernels
Authors:
Thomas Olsen,
Christopher E. Patrick,
Jefferson E. Bates,
Adrienn Ruzsinszky,
Kristian S. Thygesen
Abstract:
We review the theory and application of adiabatic exchange-correlation (xc-) kernels for ab initio calculations of ground state energies and quasiparticle excitations within the frameworks of the adiabatic connection fluctuation dissipation theorem and Hedin's equations, respectively. Various different xc-kernels, which are all rooted in the homogeneous electron gas, are introduced but hereafter w…
▽ More
We review the theory and application of adiabatic exchange-correlation (xc-) kernels for ab initio calculations of ground state energies and quasiparticle excitations within the frameworks of the adiabatic connection fluctuation dissipation theorem and Hedin's equations, respectively. Various different xc-kernels, which are all rooted in the homogeneous electron gas, are introduced but hereafter we focus on the specific class of renormalized adiabatic kernels, in particular the rALDA and rAPBE. The kernels drastically improve the description of short-range correlations as compared to the random phase approximation (RPA), resulting in significantly better correlation energies. This effect greatly reduces the reliance on error cancellations, which is essential in RPA, and systematically improves covalent bond energies while preserving the good performance of the RPA for dispersive interactions. For quasiparticle energies, the xc-kernels account for vertex corrections that are missing in the GW self-energy. In this context, we show that the short-range correlations mainly correct the absolute band positions while the band gap is less affected in agreement with the known good performance of GW for the latter. The renormalized xc-kernels offer a rigorous extension of the RPA and GW methods with clear improvements in terms of accuracy at little extra computational cost.
△ Less
Submitted 18 June, 2019;
originally announced June 2019.
-
Towards Photoferroic Materials by Design: Recent Progresses and Perspective
Authors:
Ivano E. Castelli,
Thomas Olsen,
Yunzhong Chen
Abstract:
The use of photoferroic materials that combine ferroelectric and light harvesting properties in a photovoltaic device is a promising route to significantly improve the efficiency of solar cells. These materials do not require the formation of a p-n junction and can produce photovoltages well above the value of the band gap, because of the spontaneous intrinsic polarization and the formation of dom…
▽ More
The use of photoferroic materials that combine ferroelectric and light harvesting properties in a photovoltaic device is a promising route to significantly improve the efficiency of solar cells. These materials do not require the formation of a p-n junction and can produce photovoltages well above the value of the band gap, because of the spontaneous intrinsic polarization and the formation of domain walls. In this perspective, we discuss the recent experimental progresses and challenges for the synthesis of these materials and the theoretical discovery of novel photoferroic materials using a high-throughput approach.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
Wiener Index and Remoteness in Triangulations and Quadrangulations
Authors:
Éva Czabarka,
Peter Dankelmann,
Trevor Olsen,
László A. Székely
Abstract:
Let $G$ be a a connected graph. The Wiener index of a connected graph is the sum of the distances between all unordered pairs of vertices. We provide asymptotic formulae for the maximum Wiener index of simple triangulations and quadrangulations with given connectivity, as the order increases, and make conjectures for the extremal triangulations and quadrangulations based on computational evidence.…
▽ More
Let $G$ be a a connected graph. The Wiener index of a connected graph is the sum of the distances between all unordered pairs of vertices. We provide asymptotic formulae for the maximum Wiener index of simple triangulations and quadrangulations with given connectivity, as the order increases, and make conjectures for the extremal triangulations and quadrangulations based on computational evidence. If $\overlineσ(v)$ denotes the arithmetic mean of the distances from $v$ to all other vertices of $G$, then the remoteness of $G$ is defined as the largest value of $\overlineσ(v)$ over all vertices $v$ of $G$. We give sharp upper bounds on the remoteness of simple triangulations and quadrangulations of given order and connectivity.
△ Less
Submitted 28 February, 2021; v1 submitted 16 May, 2019;
originally announced May 2019.
-
High throughput computational screening for 2D ferromagnetic materials: the critical role of anisotropy and local correlations
Authors:
Daniele Torelli,
Kristian S. Thygesen,
Thomas Olsen
Abstract:
The recent observation of ferromagnetic order in two-dimensional (2D) materials has initiated a booming interest in the subject of 2D magnetism. In contrast to bulk materials, 2D materials can only exhibit magnetic order in the presence of magnetic anisotropy. In the present work we have used the Computational 2D Materials Database (C2DB) to search for new ferromagnetic 2D materials using the spin…
▽ More
The recent observation of ferromagnetic order in two-dimensional (2D) materials has initiated a booming interest in the subject of 2D magnetism. In contrast to bulk materials, 2D materials can only exhibit magnetic order in the presence of magnetic anisotropy. In the present work we have used the Computational 2D Materials Database (C2DB) to search for new ferromagnetic 2D materials using the spinwave gap as a simple descriptor that accounts for the role of magnetic anisotropy. In addition to known compounds we find 12 novel insulating materials that exhibit magnetic order at finite temperatures. For these we evaluate the critical temperatures from classical Monte Carlo simulations of a Heisenberg model with exchange and anisotropy parameters obtained from first principles. Starting from 150 stable ferromagnetic 2D materials we find five candidates that are predicted to have critical temperatures exceeding that of CrI3. We also study the effect of Hubbard corrections in the framework of DFT+U and find that the value of U can have a crucial influence on the prediction of magnetic properties. Our work provides new insight into 2D magnetism and identifies a new set of promising monolayers for experimental investigation.
△ Less
Submitted 17 February, 2020; v1 submitted 27 March, 2019;
originally announced March 2019.