-
Twin-Boundary Structural Phase Transitions in Elemental Titanium
Authors:
Mohammad S. Hooshmand,
Ruopeng Zhang,
Yan Chong,
Enze Chen,
Timofey Frolov,
David L. Olmsted,
Andrew M. Minor,
Mark Asta
Abstract:
Twinning in crystalline materials plays an important role in many transformation and deformation processes, where underlying mechanisms can be strongly influenced by the structural, energetic and kinetic properties of associated twin boundaries (TBs). While these properties are well characterized in common cases, the possibility that TBs can display multiple complexions with distinct properties, a…
▽ More
Twinning in crystalline materials plays an important role in many transformation and deformation processes, where underlying mechanisms can be strongly influenced by the structural, energetic and kinetic properties of associated twin boundaries (TBs). While these properties are well characterized in common cases, the possibility that TBs can display multiple complexions with distinct properties, and phase transitions between them, has not been widely explored, even though such phenomena are established in a few more general grain boundaries. We report experimental findings that {11-24} TBs in titanium display a thick interfacial region with crystalline structure distinct from the bulk. First-principles calculations establish that this complexion is linked to a metastable polymorph of titanium, and exhibits behavior consistent with a solid-state wetting transition with compressive strain, and a first-order structural transition under tension. The findings document rich TB complexion behavior in an elemental metal, with important implications for mechanical behavior and phase-transformation pathways.
△ Less
Submitted 20 July, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
Evaluation of Constant Potential Method in Simulating Electric Double-Layer Capacitors
Authors:
Zhenxing Wang,
Yang Yang,
David L. Olmsted,
Mark Asta,
Brian B. Laird
Abstract:
A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations induced by charge fluctuations in the electrolyte. In this wor…
▽ More
A major challenge in the molecular simulation of electric double layer capacitors (EDLCs) is the choice of an appropriate model for the electrode. Typically, in such simulations the electrode surface is modeled using a uniform fixed charge on each of the electrode atoms, which ignores the electrode response to local charge fluctuations induced by charge fluctuations in the electrolyte. In this work, we evaluate and compare this Fixed Charge Method (FCM) with the more realistic Constant Potential Method (CPM), [Reed, et al., J. Chem. Phys., 126, 084704 (2007)], in which the electrode charges fluctuate in order to maintain constant electric potential in each electrode. For this comparison, we utilize a simplified LiClO$_4$-acetonitrile/graphite EDLC. At low potential difference ($ΔΨ\le 2V$), the two methods yield essentially identical results for ion and solvent density profiles; however, significant differences appear at higher $ΔΨ$. At $ΔΨ\ge 4V$, the CPM ion density profiles show significant enhancement (over FCM) of "partially electrode solvated" Li$^+$ ions very close to the electrode surface. The ability of the CPM electrode to respond to local charge fluctuations in the electrolyte is seen to significantly lower the energy (and barrier) for the approach of Li$^+$ ions to the electrode surface.
△ Less
Submitted 24 September, 2014; v1 submitted 4 August, 2014;
originally announced August 2014.
-
Structural phase transformations in metallic grain boundaries
Authors:
Timofey Frolov,
David L. Olmsted,
Mark Asta,
Yuri Mishin
Abstract:
Structural transformations at interfaces are of profound fundamental interest as complex examples of phase transitions in low-dimensional systems. Despite decades of extensive research, no compelling evidence exists for structural transformations in high-angle grain boundaries in elemental systems. Here we show that the critical impediment to observations of such phase transformations in atomistic…
▽ More
Structural transformations at interfaces are of profound fundamental interest as complex examples of phase transitions in low-dimensional systems. Despite decades of extensive research, no compelling evidence exists for structural transformations in high-angle grain boundaries in elemental systems. Here we show that the critical impediment to observations of such phase transformations in atomistic modeling has been rooted in inadequate simulation methodology. The proposed new methodology allows variations in atomic density inside the grain boundary and reveals multiple grain boundary phases with different atomic structures. Reversible first-order transformations between such phases are observed by varying temperature or injecting point defects into the boundary region. Due to the presence of multiple metastable phases, grain boundaries can absorb significant amounts of point defects created inside the material by processes such as irradiation. We propose a novel mechanism of radiation damage healing in metals which may guide further improvements in radiation resistance of metallic materials through grain boundary engineering.
△ Less
Submitted 29 March, 2013; v1 submitted 7 November, 2012;
originally announced November 2012.
-
Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys
Authors:
David L. Olmsted,
Louis G. Hector Jr,
W. A. Curtin,
R. J. Clifton
Abstract:
Dislocation velocities and mobilities are studied by Molecular Dynamics simulations for edge and screw dislocations in pure aluminum and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg random substitutional alloys using EAM potentials. In the pure materials, the velocities of all dislocations are close to linear with the ratio of (applied stress)/(temperature) at low velocities, consist…
▽ More
Dislocation velocities and mobilities are studied by Molecular Dynamics simulations for edge and screw dislocations in pure aluminum and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg random substitutional alloys using EAM potentials. In the pure materials, the velocities of all dislocations are close to linear with the ratio of (applied stress)/(temperature) at low velocities, consistent with phonon drag models and quantitative agreement with experiment is obtained for the mobility in Al. At higher velocities, different behavior is observed. The edge dislocation velocity remains dependent solely on (applied stress)/(temperature) up to approximately 1.0 MPa/K, and approaches a plateau velocity that is lower than the smallest "forbidden" speed predicted by continuum models. In contrast, above a velocity around half of the smallest continuum wave speed, the screw dislocation dam** has a contribution dependent solely on stress with a functional form close to that predicted by a radiation dam** model of Eshelby. At the highest applied stresses, there are several regimes of nearly constant (transonic or supersonic) velocity separated by velocity gaps in the vicinity of forbidden velocities; various modes of dislocation disintegration and destabilization were also encountered in this regime. In the alloy systems, there is a temperature- and concentration-dependent pinning regime where the velocity drops sharply below the pure metal velocity. Above the pinning regime but at moderate stresses, the velocity is again linear in (applied stress)/(temperature) but with a lower mobility than in the pure metal.
△ Less
Submitted 13 December, 2004;
originally announced December 2004.
-
Lattice Resistance and Peierls Stress in Finite-size Atomistic Dislocation Simulations
Authors:
David L. Olmsted,
Kedar Y. Hardikar,
Rob Phillips
Abstract:
Atomistic computations of the Peierls stress in fcc metals are relatively scarce. By way of contrast, there are many more atomistic computations for bcc metals, as well as mixed discrete-continuum computations of the Peierls-Nabarro type for fcc metals. One of the reasons for this is the low Peierls stresses in fcc metals. Because atomistic computations of the Peierls stress take place in finite…
▽ More
Atomistic computations of the Peierls stress in fcc metals are relatively scarce. By way of contrast, there are many more atomistic computations for bcc metals, as well as mixed discrete-continuum computations of the Peierls-Nabarro type for fcc metals. One of the reasons for this is the low Peierls stresses in fcc metals. Because atomistic computations of the Peierls stress take place in finite simulation cells, image forces caused by boundaries must either be relaxed or corrected for if system size independent results are to be obtained. One of the approaches that has been developed for treating such boundary forces is by computing them directly and subsequently subtracting their effects, as developed by V. B. Shenoy and R. Phillips [Phil. Mag. A, 76 (1997) 367]. That work was primarily analytic, and limited to screw dislocations and special symmetric geometries. We extend that work to edge and mixed dislocations, and to arbitrary two-dimensional geometries, through a numerical finite element computation. We also describe a method for estimating the boundary forces directly on the basis of atomistic calculations. We apply these methods to the numerical measurement of the Peierls stress and lattice resistance curves for a model aluminum (fcc) system using an embedded-atom potential.
△ Less
Submitted 31 October, 2000;
originally announced October 2000.
-
Monte Carlo Study of Short-Range Order and Displacement Effects in Disordered CuAu
Authors:
O. Malis,
K. F. Ludwig, Jr.,
D. L. Olmsted,
B. Chakraborty
Abstract:
The correlation between local chemical environment and atomic displacements in disordered CuAu alloy has been studied using Monte Carlo simulations based on the effective medium theory (EMT) of metallic cohesion. These simulations correctly reproduce the chemically-specific nearest-neighbor distances in the random alloy across the entire Cu\$_x\$Au\$_{1-x}\$ concentration range. In the random eq…
▽ More
The correlation between local chemical environment and atomic displacements in disordered CuAu alloy has been studied using Monte Carlo simulations based on the effective medium theory (EMT) of metallic cohesion. These simulations correctly reproduce the chemically-specific nearest-neighbor distances in the random alloy across the entire Cu\$_x\$Au\$_{1-x}\$ concentration range. In the random equiatomic CuAu alloy, the chemically specific pair distances depend strongly on the local atomic environment (i.e. fraction of like/unlike nearest neighbors). In CuAu alloy with short-range order, the relationship between local environment and displacements remains qualitatively similar. However the increase in short-range order causes the average Cu-Au distance to decrease below the average Cu-Cu distance, as it does in the ordered CuAuI phase. Many of these trends can be understood qualitatively from the different neutral sphere radii and compressibilities of the Cu and Au atoms.
△ Less
Submitted 10 August, 1998;
originally announced August 1998.
-
Volume changes in binary alloy ordering, a binary classical density functional theory approach
Authors:
David L. Olmsted
Abstract:
The chemical ordering transition in a binary alloy is examined using classical density functional theory for a binary mixture. The ordered lattice is assumed to be obtained from the disordered lattice by a volume change only, as in L1_2 ordering from an face centered cubic chemically disordered crystal. Using the simplest possible approach, second order truncation of the expansion, non-overlappi…
▽ More
The chemical ordering transition in a binary alloy is examined using classical density functional theory for a binary mixture. The ordered lattice is assumed to be obtained from the disordered lattice by a volume change only, as in L1_2 ordering from an face centered cubic chemically disordered crystal. Using the simplest possible approach, second order truncation of the expansion, non-overlap** Gaussian distributions at the sites, and expansion of the correlation functions about the sites, a very tractable expansion is obtained. Under these assumptions the expansion consists of the same terms as the lattice gas formalism where the lattice is implicitly taken as fixed, plus additional interaction terms, and an additional entropy term. This additional entropy term represents a lowest order approximation to the vibrational entropy change.
△ Less
Submitted 7 June, 1998;
originally announced June 1998.
-
The Gauged Vector Model in Four-Dimensions: Resolution of an Old Problem?
Authors:
David L. Olmsted,
Howard J. Schnitzer
Abstract:
A calculation of the renormalization group improved effective potential for the gauged U(N) vector model, coupled to $N_f$ fermions in the fundamental representation, computed to leading order in 1/N, all orders in the scalar self-coupling $λ$, and lowest order in gauge coupling $g^2$, with $N_f$ of order $N$, is presented. It is shown that the theory has two phases, one of which is asymptotical…
▽ More
A calculation of the renormalization group improved effective potential for the gauged U(N) vector model, coupled to $N_f$ fermions in the fundamental representation, computed to leading order in 1/N, all orders in the scalar self-coupling $λ$, and lowest order in gauge coupling $g^2$, with $N_f$ of order $N$, is presented. It is shown that the theory has two phases, one of which is asymptotically free, and the other not, where the asymptotically free phase occurs if $0 < λ/g^2 < {4/3} (\frac{N_f}{N} - 1)$, and $\frac{N_f}{N} < {11/2}$. In the asymptotically free phase, the effective potential behaves qualitatively like the tree-level potential. In the other phase, the theory exhibits all the difficulties of the ungauged $(g^2 = 0)$ vector model. Therefore the theory appears to be consistent (only) in the asymptotically free phase.
△ Less
Submitted 15 July, 1997; v1 submitted 13 February, 1996;
originally announced February 1996.