-
A continuum model for the elongation and orientation of Von Willebrand Factor with applications in arterial flow
Authors:
Edwina F. Yeo,
James M. Oliver,
Netanel Korin,
Sarah L. Waters
Abstract:
The blood protein Von Willebrand Factor (VWF) is critical in facilitating arterial thrombosis. At pathologically high shear rates the protein unfolds and binds to the arterial wall, enabling the rapid deposition of platelets from the blood. We present a novel continuum model for VWF dynamics in flow based on a modified viscoelastic fluid model that incorporates a single constitutive relation to de…
▽ More
The blood protein Von Willebrand Factor (VWF) is critical in facilitating arterial thrombosis. At pathologically high shear rates the protein unfolds and binds to the arterial wall, enabling the rapid deposition of platelets from the blood. We present a novel continuum model for VWF dynamics in flow based on a modified viscoelastic fluid model that incorporates a single constitutive relation to describe the propensity of VWF to unfold as a function of the scalar shear rate. Using experimental data of VWF unfolding in pure shear flow, we fix the parameters for VWF's unfolding propensity and the maximum VWF length, so that the protein is half unfolded at a shear rate of approximately 5,000 s$^{-1}$. We then use the theoretical model to predict VWF's behaviour in two complex flows where experimental data is challenging to obtain: pure elongational flow and stenotic arterial flow.
In pure elongational flow, our model predicts that VWF is 50% unfolded at approximately 2,000 s$^{-1}$, matching the established hypothesis that VWF unfolds at lower shear rates in elongational flow than in shear flow. We demonstrate the sensitivity of this elongational flow prediction to the value of maximum VWF length used in the model, which varies significantly across experimental studies, predicting that VWF can unfold between 600 - 3,200 s$^{-1}$ depending on the selected value. Finally, we examine VWF dynamics in a range of idealised arterial stenoses, predicting the relative extension of VWF in elongational flow structures in the centre of the artery compared to high-shear regions near the arterial walls.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
The nascent coffee ring with arbitrary droplet contact set: an asymptotic analysis
Authors:
Matthew R. Moore,
Dominic Vella,
James M. Oliver
Abstract:
We consider the effect of droplet geometry on the early-stages of coffee ring formation during the evaporation of a thin droplet with an arbitrary simple, smooth, pinned contact line. We perform a systematic matched asymptotic analysis of the small-capillary number, large-solutal Peclet number limit for two evaporative models: a kinetic model, in which the evaporative flux is constant across the d…
▽ More
We consider the effect of droplet geometry on the early-stages of coffee ring formation during the evaporation of a thin droplet with an arbitrary simple, smooth, pinned contact line. We perform a systematic matched asymptotic analysis of the small-capillary number, large-solutal Peclet number limit for two evaporative models: a kinetic model, in which the evaporative flux is constant across the droplet, and a diffusive model, in which the evaporative flux is singular at the contact line. For both evaporative models, solute is transported to the contact line by a capillary flow while, local to the contact line, solute diffusion counters advection. The resulting interplay leads to the formation of the nascent coffee ring. By exploiting a coordinate system embedded in the contact line, we solve explicitly the local leading-order problem, deriving a similarity profile (in the form of a gamma distribution) that describes the coffee ring profile in its early stages. Notably, the ring characteristics change due to the concomitant asymmetry in the shape of the droplet free surface, the evaporative flux (in the diffusive evaporative regime) and the mass flux into the contact line. We utilize the asymptotic model to determine the effects of geometry on the growth of the coffee ring for a droplet with an elliptical contact set. Our results offer mechanistic insight into the effect of contact-line curvature on the development of the coffee-ring from deposition up to jamming of the solute; moreover our model predicts when finite concentration effects become relevant.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
The nascent coffee ring: how solute diffusion counters advection
Authors:
Matthew R. Moore,
Dominic Vella,
James M. Oliver
Abstract:
We study the initial evolution of the coffee ring that is formed by the evaporation of a thin, axisymmetric, surface tension-dominated droplet containing a dilute solute. When the solutal Péclet number is large, we show that diffusion close to the droplet contact line controls the coffee-ring structure in the initial stages of evaporation. We perform a systematic matched asymptotic analysis for tw…
▽ More
We study the initial evolution of the coffee ring that is formed by the evaporation of a thin, axisymmetric, surface tension-dominated droplet containing a dilute solute. When the solutal Péclet number is large, we show that diffusion close to the droplet contact line controls the coffee-ring structure in the initial stages of evaporation. We perform a systematic matched asymptotic analysis for two evaporation models -- a simple, non-equilibrium, one-sided model (in which the evaporative flux is taken to be constant across the droplet surface) and a vapour-diffusion limited model (in which the evaporative flux is singular at the contact line) -- valid during the early stages in which the solute remains dilute. We call this the `nascent coffee ring' and describe the evolution of its features, including the size and location of the peak concentration and a measure of the width of the ring. Moreover, we use the asymptotic results to investigate when the assumption of a dilute solute breaks down and the effects of finite particle size and jamming are expected to become important. In particular, we illustrate the limited validity of this model in the diffusive evaporative flux regime.
△ Less
Submitted 18 June, 2021; v1 submitted 24 November, 2020;
originally announced November 2020.
-
Droplet impact onto a spring-supported plate: analysis and simulations
Authors:
Michael J. Negus,
Matthew R. Moore,
James M. Oliver,
Radu Cimpeanu
Abstract:
The high-speed impact of a droplet onto a flexible substrate is a highly nonlinear process of practical importance which poses formidable modelling challenges in the context of fluid-structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct nume…
▽ More
The high-speed impact of a droplet onto a flexible substrate is a highly nonlinear process of practical importance which poses formidable modelling challenges in the context of fluid-structure interaction. We present two approaches aimed at investigating the canonical system of a droplet impacting onto a rigid plate supported by a spring and a dashpot: matched asymptotic expansions and direct numerical simulation (DNS). In the former, we derive a generalisation of inviscid Wagner theory to approximate the flow behaviour during the early stages of the impact. In the latter, we perform detailed DNS designed to validate the analytical framework, as well as provide insight into later times beyond the reach of the proposed mathematical model. Drawing from both methods, we observe the strong influence that the mass of the plate, resistance of the dashpot and stiffness of the spring have on the motion of the solid, which undergoes forced damped oscillations. Furthermore, we examine how the plate motion affects the dynamics of the droplet, predominantly through altering its internal hydrodynamic pressure distribution. We build on the interplay between these techniques, demonstrating that a hybrid approach leads to improved model and computational development, as well as result interpretation, across multiple length- and time-scales.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
It's harder to splash on soft solids
Authors:
Christopher J. Howland,
Arnaud Antkowiak,
J. Rafael Castrejón-Pita,
Sam D. Howison,
James M. Oliver,
Robert W. Style,
Alfonso A. Castrejón-Pita
Abstract:
Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more ki…
▽ More
Droplets splash when they impact dry, flat substrates above a critical velocity that depends on parameters such as droplet size, viscosity and air pressure. By imaging ethanol drops impacting silicone gels of different stiffnesses we show that substrate stiffness also affects the splashing threshold. Splashing is reduced or even eliminated: droplets on the softest substrates need over 70\% more kinetic energy to splash than they do on rigid substrates. We show that this is due to energy losses caused by deformations of soft substrates during the first few microseconds of impact. We find that solids with Young's moduli $\lesssim 100$kPa reduce splashing, in agreement with simple scaling arguments. Thus materials like soft gels and elastomers can be used as simple coatings for effective splash prevention. Soft substrates also serve as a useful system for testing splash-formation theories and sheet-ejection mechanisms, as they allow the characteristics of ejection sheets to be controlled independently of the bulk impact dynamics of droplets.
△ Less
Submitted 30 September, 2016; v1 submitted 19 November, 2015;
originally announced November 2015.
-
On the boundary layer structure near a highly permeable porous interface
Authors:
Mohit P. Dalwadi,
S. Jonathan Chapman,
Sarah L. Waters,
James M. Oliver
Abstract:
The method of matched asymptotic expansions is used to study the canonical problem of steady laminar flow through a narrow two-dimensional channel blocked by a tight-fitting finite-length highly permeable porous obstacle. We investigate the behaviour of the local flow close to the interface between the single-phase and porous regions (governed by the incompressible Navier--Stokes and Darcy flow eq…
▽ More
The method of matched asymptotic expansions is used to study the canonical problem of steady laminar flow through a narrow two-dimensional channel blocked by a tight-fitting finite-length highly permeable porous obstacle. We investigate the behaviour of the local flow close to the interface between the single-phase and porous regions (governed by the incompressible Navier--Stokes and Darcy flow equations, respectively). We solve for the flow in these inner regions in the limits of low and high Reynolds number, facilitating an understanding of the nature of the transition from Poiseuille to plug to Poiseuille flow in each of these limits. Significant analytic progress is made in the high-Reynolds-number limit, and we explore in detail the rich boundary layer structure that occurs. We consider the three-dimensional generalization to unsteady laminar flow through and around a tight-fitting highly permeable cylindrical porous obstacle within a Hele-Shaw cell. For the high-Reynolds-number limit, we give the coupling conditions and interfacial stress in terms of the outer flow variables, allowing information from a nonlinear three-dimensional problem to be obtained by solving a linear two-dimensional problem. Finally, we illustrate the utility of our analysis by considering the specific example of time-dependent forced far-field flow in a Hele-Shaw cell containing a porous cylinder with a circular cross-section. We determine the internal stress within the porous obstacle, which is key for tissue engineering applications, and the interfacial stress on the boundary of the porous obstacle, which has applications to biofilm erosion. In the high-Reynolds-number limit, we demonstrate that the fluid inertia can result in the cylinder experiencing a time-independent net force, even when the far-field forcing is periodic with zero mean.
△ Less
Submitted 2 December, 2016; v1 submitted 14 July, 2015;
originally announced July 2015.
