-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
A sub-micron resolution, bunch-by-bunch beam trajectory feedback system and its application to reducing wakefield effects in single-pass beamlines
Authors:
D. R. Bett,
P. N. Burrows,
C. Perry,
R. Ramjiawan,
N. Terunuma,
K. Kubo,
T. Okugi
Abstract:
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the vertical position of the bunch measured at two beam position monitors (BPMs) to calculate a pair of kicks which are applied to the next bunch using two upstream…
▽ More
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the vertical position of the bunch measured at two beam position monitors (BPMs) to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. Using trains of two electron bunches separated in time by 187.6~ns, the system was optimised so as to stabilize the beam offset at the feedback BPMs to better than 350~nm, yielding a local trajectory angle correction to within 250~nrad. The quality of the correction was verified using three downstream witness BPMs and the results were found to be in agreement with the predictions of a linear lattice model used to propagate the beam trajectory from the feedback region. This same model predicts a corrected beam jitter of c.~1~nm at the focal point of the accelerator. Measurements with a beam size monitor at this location demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the increase in the measured beam size as a function of beam charge by a factor of c.~1.6.
△ Less
Submitted 3 November, 2020; v1 submitted 28 August, 2020;
originally announced August 2020.
-
Operation of ILC250 at the Z-pole
Authors:
Kaoru Yokoya,
Kiyoshi Kubo,
Toshiyuki Okugi
Abstract:
ILC (International Linear Collider) is under consideration as the next global project of particle physics. Its Technical Design Report, published in 2013, describes the accelerator for the center-of-mass energies above 200GeV. The operation of ILC at lower center-of-mass energies has not been studies intensively. This report discusses the operation of the ILC at a center-of-mass 91.2GeV and presen…
▽ More
ILC (International Linear Collider) is under consideration as the next global project of particle physics. Its Technical Design Report, published in 2013, describes the accelerator for the center-of-mass energies above 200GeV. The operation of ILC at lower center-of-mass energies has not been studies intensively. This report discusses the operation of the ILC at a center-of-mass 91.2GeV and presents a possible parameter set.
△ Less
Submitted 12 September, 2019; v1 submitted 22 August, 2019;
originally announced August 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Evaluation of Beam Halo from Beam-Gas Scattering at the KEK-ATF
Authors:
R. Yang,
T. Naito,
S. Bai,
A. Aryshev,
K. Kubo,
T. Okugi,
N. Terunuma,
D. Zhou,
A. Faus-Golfe,
V. Kubytskyi,
S. Liu,
S. Wallon
Abstract:
In circular colliders, as well as in dam** rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to…
▽ More
In circular colliders, as well as in dam** rings and synchrotron radiation light sources, beam halo is one of the critical issues limiting the performance as well as potentially causing component damage and activation. It is imperative to clearly understand the mechanisms that lead to halo formation and to test the available theoretical models. Elastic beam-gas scattering can drive particles to large oscillation amplitudes and be a potential source of beam halo. In this paper, numerical estimation and Monte Carlo simulations of this process at the ATF of KEK are presented. Experimental measurements of beam halo in the ATF2 beam line using a diamond sensor detector are also described, which clearly demonstrates the influence of the beam-gas scattering process on the transverse halo distribution.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Experimental and Theoretical Progress of Linear Collider Final Focus Design and ATF2 Facility
Authors:
Andrei Seryi,
Rogelio Tomas,
Frank Zimmermann,
Kiyoshi Kubo,
Shigeru Kuroda,
Toshiyuki Okugi,
Toshiaki Tauchi,
Nobuhiro Terunuma,
Junji Urakawa,
Glen White,
Mark Woodley,
Deepa Angal-Kalinin
Abstract:
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
In this brief overview we will reflect on the process of the design of the linear collider (LC) final focus (FF) optics, and will also describe the theoretical and experimental efforts on design and practical realisation of a prototype of the LC FF optics implemented in the ATF2 facility at KEK, Japan, presently being commissioned and operated.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Shintake Monitor in ATF2 : Present Status
Authors:
Takashi Yamanaka,
Masahiro Oroku,
Yohei Yamaguchi,
Yoshio Kamiya,
Taikan Suehara,
Sachio Komamiya,
Toshiyuki Okugi,
Nobuhiro Terunuma,
Toshiaki Tauchi,
Sakae Araki,
Junji Urakawa
Abstract:
A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here.
A beam size monitor so called Shintake monitor, which uses the inverse Compton scattering between the laser interference fringe and the electron beam was designed for and installed at ATF2. The commissioning at ATF2 was started in the end of 2008 and succeeded in the measurement of the fringe pattern from the scattered gamma-rays. The present status of the Shintake monitor is described here.
△ Less
Submitted 18 June, 2010;
originally announced June 2010.
-
Shintake Monitor in ATF2: Performance Evaluation
Authors:
Y. Yamaguchi,
T. Yamanaka,
M. Oroku,
Y. Kamiya,
S. Komamiya,
T. Suehara,
T. Okugi,
N. Terunuma,
T. Tauchi,
S. Araki,
J. Urakawa
Abstract:
The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are…
▽ More
The beam test for the Shintake monitor succeeded in measuring signal modulation with the laser interference fringe pattern in November 2009. We have studied the error sources, and evaluated the systematic error to be less than 30% for 1 minute measurements. This paper centers on the evaluation of the Shintake monitor performance through analyzing beam tests deta. Most systematic error sources are well understood, enabling accurate measurement of the beam size when it reaches 37 nm.
△ Less
Submitted 17 June, 2010; v1 submitted 17 June, 2010;
originally announced June 2010.
-
Photon generation by laser-Compton scattering at the KEK-ATF
Authors:
Shuhei Miyoshi,
Tomoya Akagi,
Sakae Araki,
Yoshisato Funahashi,
Tachishige Hirose,
Yosuke Honda,
Masao Kuriki,
Xiao Li,
Toshiyuki Okugi,
Tsunehiko Omori,
Guoxi Pei,
Kazuyuki Sakaue,
Hirotaka Shimizu,
Tohru Takahashi,
Nobuhiro Terunuma,
Junji Urakawa,
Yasuaki Ushio,
Masakazu Washio
Abstract:
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colli…
▽ More
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second.
△ Less
Submitted 18 February, 2010;
originally announced February 2010.
-
Design of a Polarised Positron Source Based on Laser Compton Scattering
Authors:
S. Araki,
Y. Higashi,
Y. Honda,
Y. Kurihara,
M. Kuriki,
T. Okugi,
T. Omori,
T. Taniguchi,
N. Terunuma,
J. Urakawa,
X. Artru,
M. Chevallier,
V. Strakhovenko,
E. Bulyak,
P. Gladkikh,
K. Moenig,
R. Chehab,
A. Variola,
F. Zomer,
S. Guiducci,
P. Raimondi,
F. Zimmermann,
K. Sakaue,
T. Hirose,
M. Washio
, et al. (10 additional authors not shown)
Abstract:
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
We describe a scheme for producing polarised positrons at the ILC from polarised X-rays created by Compton scattering of a few-GeV electron beam off a CO2 or YAG laser. This scheme is very energy effective using high finesse laser cavities in conjunction with an electron storage ring.
△ Less
Submitted 15 September, 2005; v1 submitted 2 September, 2005;
originally announced September 2005.
-
Efficient propagation of the polarization from laser photons to positrons through Compton scattering and electron-positron pair creation
Authors:
T. Omori,
M. Fukuda,
T. Hirose,
Y. Kurihara,
R. Kuroda,
M. Nomura,
A. Ohashi,
T. Okugi,
K. Sakaue,
T. Saito,
J. Urakawa,
M. Washio,
I. Yamazaki
Abstract:
We demonstrated for the first time the production of highly polarized short-pulse positrons with a finite energy spread in accordance with a new scheme that consists of two-quantum processes, such as inverse Compton scatterings and electron-positron pair creations. Using a circularly polarized laser beam of 532 nm scattered off a high-quality electron beam with the energy of 1.28 GeV, we obtaine…
▽ More
We demonstrated for the first time the production of highly polarized short-pulse positrons with a finite energy spread in accordance with a new scheme that consists of two-quantum processes, such as inverse Compton scatterings and electron-positron pair creations. Using a circularly polarized laser beam of 532 nm scattered off a high-quality electron beam with the energy of 1.28 GeV, we obtained polarized positrons with an intensity of 10^4 e+/bunch. Magnitude of positron polarizations was determined as 73+-15(sta) +-19(sys)% by means of a newly designed positron polarimeter.
△ Less
Submitted 20 February, 2006; v1 submitted 11 August, 2005;
originally announced August 2005.
-
Intrabeam scattering analysis of measurements at KEK's ATF dam** ring
Authors:
K. L. F. Bane,
H. Hayano,
K. Kubo,
T. Naito,
T. Okugi,
J. Urakawa
Abstract:
We derive a simple relation for estimating the relative emittance growth in x and y due to intrabeam scattering (IBS) in electron storage rings. We show that IBS calculations for the ATF dam** ring, when using the formalism of Bjorken-Mtingwa, a modified formalism of Piwinski (where eta squared divided by beta has been replaced by the dispersion invariant), or a simple high-energy approximate…
▽ More
We derive a simple relation for estimating the relative emittance growth in x and y due to intrabeam scattering (IBS) in electron storage rings. We show that IBS calculations for the ATF dam** ring, when using the formalism of Bjorken-Mtingwa, a modified formalism of Piwinski (where eta squared divided by beta has been replaced by the dispersion invariant), or a simple high-energy approximate formula all give results that agree well. Comparing theory, including the effect of potential well bunch lengthening, with a complete set of ATF steady-state beam size vs. current measurements we find reasonably good agreement for energy spread and horizontal emittance. The measured vertical emittance, however, is larger than theory in both offset (zero current emittance) and slope (emittance change with current). The slope error indicates measurement error and/or additional current-dependent physics at the ATF; the offset error, that the assumed Coulomb log is correct to within a factor of 1.75.
△ Less
Submitted 1 June, 2002;
originally announced June 2002.
-
Intrabeam Scattering Analysis of ATF Beam Measurements
Authors:
K. L. F. Bane,
H. Hayano,
K. Kubo,
T. Naito,
T. Okugi,
J. Urakawa
Abstract:
At the Accelerator Test Facility (ATF) at KEK intrabeam scattering (IBS) is a strong effect for an electron machine. It is an effect that couples all dimensions of the beam, and in April 2000, over a short period of time, all dimensions were measured as functions of current. In this report we derive a simple relation for the growth rates of emittances due to IBS. We apply the theories of Bjorken…
▽ More
At the Accelerator Test Facility (ATF) at KEK intrabeam scattering (IBS) is a strong effect for an electron machine. It is an effect that couples all dimensions of the beam, and in April 2000, over a short period of time, all dimensions were measured as functions of current. In this report we derive a simple relation for the growth rates of emittances due to IBS. We apply the theories of Bjorken-Mtingwa, Piwinski, and a formula due to Raubenheimer to the ATF parameters, and find that the results all agree (if in Piwinski's formalism we replace the dispersion squared over beta by the dispersion invariant). Finally, we compare theory, including the effect of potential well bunch lengthening, with the April 2000 measurements, and find reasonably good agreement in the energy spread and horizontal emittance dependence on current. The vertical emittance measurement, however, implies that either: there is error in the measurement (equivalent to an introduction of 0.6% x-y coupling error), or the effect of intrabeam scattering is stronger than predicted (35% stronger in growth rates).
△ Less
Submitted 2 August, 2001; v1 submitted 20 June, 2001;
originally announced June 2001.
-
Impedance Analysis of Bunch Length Measurements at the ATF Dam** Ring
Authors:
K. L. F. Bane,
T. Naito,
T. Okugi,
Q. Qin,
J. Urakawa
Abstract:
We present energy spread and bunch length measurements at the Accelerator Test Facility (ATF) at KEK, as functions of current, for different ring rf voltages, and with the beam both on and off the coupling resonance. We fit the on-coupling bunch shapes to those of an impedance model consisting of a resistor and an inductor connected in series. We find that the fits are reasonably good, but that…
▽ More
We present energy spread and bunch length measurements at the Accelerator Test Facility (ATF) at KEK, as functions of current, for different ring rf voltages, and with the beam both on and off the coupling resonance. We fit the on-coupling bunch shapes to those of an impedance model consisting of a resistor and an inductor connected in series. We find that the fits are reasonably good, but that the resulting impedance is unexpectedly large.
△ Less
Submitted 29 May, 2001;
originally announced May 2001.
-
Intrabeam Scattering Analysis of ATF Beam Data Taken in April 2000
Authors:
K. Bane,
H. Hayano,
K. Kubo,
T. Naito,
T. Okugi,
J. Urakawa
Abstract:
In April 2000 the single bunch energy spread, bunch length, horizontal emittance, and vertical emittance were measured as functions of current in KEK's ATF dam** ring. In this report the measurement results are analyzed in light of intrabeam scattering theory. The measurements are found to be relatively consistent with theory, although the measured effects appear to be stronger than theory. In…
▽ More
In April 2000 the single bunch energy spread, bunch length, horizontal emittance, and vertical emittance were measured as functions of current in KEK's ATF dam** ring. In this report the measurement results are analyzed in light of intrabeam scattering theory. The measurements are found to be relatively consistent with theory, although the measured effects appear to be stronger than theory. In addition, the factor of 3 growth in vertical emittance at a current of 3 mA does not seem to be supported.
△ Less
Submitted 21 December, 2000;
originally announced December 2000.
-
Bunch Length Measurements at the ATF Dam** Ring in April 2000
Authors:
K. L. F. Bane,
T. Naito,
T. Okugi,
J. Urakawa
Abstract:
This report presents bunch length and energy spread measurements performed in April 2000 at the ATF Dam** Ring, at KEK. Measurements were performed with the beam on and then off the linear (difference) coupling resonance. Due to strong intra-beam scattering in the ATF ring, the results depended strongly on the coupling.
This report presents bunch length and energy spread measurements performed in April 2000 at the ATF Dam** Ring, at KEK. Measurements were performed with the beam on and then off the linear (difference) coupling resonance. Due to strong intra-beam scattering in the ATF ring, the results depended strongly on the coupling.
△ Less
Submitted 16 October, 2000;
originally announced October 2000.
-
Energy stabilization of 1.5 GeV S-Band linac
Authors:
M. Kuriki,
H. Hayano,
T. Naito,
T. Okugi,
V. Vogel
Abstract:
KEK-ATF is studying low emittance, multi-bunch electron beam for the future linear collider. The energy instability of the 1.5 GeV linac has been a problem making the beam injection to the dam** ring unstable. Because the unstable beam generates also large amount of the radiation, the beam current is limited by the KEK radiation safety policy much lower than what we expect. Stabilizing the S-b…
▽ More
KEK-ATF is studying low emittance, multi-bunch electron beam for the future linear collider. The energy instability of the 1.5 GeV linac has been a problem making the beam injection to the dam** ring unstable. Because the unstable beam generates also large amount of the radiation, the beam current is limited by the KEK radiation safety policy much lower than what we expect. Stabilizing the S-band linac is therefore important not only to improve the beam quality, but also to clear the radiation safety limit to start the multi-bunch operation.
We have made various modifications to solve the problem on the electron gun, modulator, klystron etc. For the modulator, we have developed a feed-forward controlled De-Q module. This module compensates the voltage jitter by controlling the deQ timing with a feed-forward circuit because the amount of the excessive charge up is strongly correlated to the charge up slope that can be measured prior to the deQ timing. The energy stability was examined and was improved by a factor of 3, from 0.6% to 0.2% of itself. Modification for the feed-forward circuit to get more stability was made. The test for the new circuit is in progress. For the long term instability, phase-lock system for klystron RF is being installed. In the test operation, it showed a good performance and compensate the phase drift less than 1 deg.
△ Less
Submitted 11 August, 2000;
originally announced August 2000.
