-
Construction and Commissioning of Mid-Infrared SASE FEL at cERL
Authors:
Yosuke Honda,
Masahiro Adachi,
Shu Eguchi,
Masafumi Fukuda,
Ryoichi Hajima,
Nao Higashi,
Masayuki Kakehata,
Ryukou Kato,
Takako Miura,
Tsukasa Miyajima,
Shinya Nagahashi,
Norio Nakamura,
Kazuyuki Nigorikawa,
Takashi Nogami,
Takashi Obina,
Hidenori Sagehashi,
Hiroshi Sakai,
Tadatake Sato,
Miho Shimada,
Tatsuro Shioya,
Ryota Takai,
Olga Tanaka,
Yasunori Tanimoto,
Kimichika Tsuchiya,
Takashi Uchiyama
, et al. (4 additional authors not shown)
Abstract:
The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted…
▽ More
The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted in the mid-infrared wavelength range, it may have advantages such as layout simplicity, the possibility of producing a single pulse, and scalability to a short-wavelength facility. To demonstrate the operation of a mid-infrared SASE FEL system in an energy recovery linac (ERL) layout, we constructed an SASE FEL setup in cERL, a test facility of the superconducting linac with the ERL configuration. Despite the adverse circumstance of space charge effects due to the given boundary condition of the facility, we successfully established the beam condition at the undulators, and observed FEL emission at a wavelength of 20 $μ$m. The results show that the layout of cERL has the potential for serving as a mid-infrared light source.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
High-efficiency broadband THz emission via diffraction-radiation cavity
Authors:
Yosuke Honda,
Miho Shimada,
Alexander Aryshev,
Ryukou Kato,
Tsukasa Miyajima,
Takashi Obina,
Ryota Takai,
Takashi Uchiyama,
Naoto Yamamoto
Abstract:
Accelerator-based terahertz (THz) radiation has been expected to realize a high-power broadband source. Employing a low-emittance and short-bunch electron beam at a high repetition rate, a scheme of coherent diffraction-radiation in an optical cavity layout is proposed. The scheme's stimulated radiation process between bunches can greatly enhance the efficiency of the radiation emission. We perfor…
▽ More
Accelerator-based terahertz (THz) radiation has been expected to realize a high-power broadband source. Employing a low-emittance and short-bunch electron beam at a high repetition rate, a scheme of coherent diffraction-radiation in an optical cavity layout is proposed. The scheme's stimulated radiation process between bunches can greatly enhance the efficiency of the radiation emission. We performed an experiment with a superconducting linac constructed as an energy recovery linac (ERL) test facility. The electron beam passes through small holes in the cavity mirrors without being destroyed. A sharp THz resonance signal, which indicates broadband stimulated radiation correlated with beam deceleration, was observed while scanning the round-trip length of the cavity. This observation proves the efficient beam-to-radiation energy conversion due to the stimulated radiation process.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Overview of LLRF System for iBNCT Accelerator
Authors:
Z. Fang,
K. Futatsukawa,
Y. Fukui,
T. Obina,
Y. Honda,
F. Qiu,
T. Sugimura,
S. Michizono,
S. Anami,
F. Naito,
H. Kobayashi,
T. Kurihara,
M. Sato,
T. Miyajima,
T. Ohba,
N. Nagura
Abstract:
At the Ibaraki Neutron Medical Research Center, an accelerator-based neutron source for iBNCT (Ibaraki - Boron Neutron Capture Therapy) is being developed using an 8-MeV proton linac and a beryllium-based neutron production target. The proton linac consists of an RFQ and a DTL, which is almost the same as the front part of J-PARC linac. However, here only one high-power klystron is used as the RF…
▽ More
At the Ibaraki Neutron Medical Research Center, an accelerator-based neutron source for iBNCT (Ibaraki - Boron Neutron Capture Therapy) is being developed using an 8-MeV proton linac and a beryllium-based neutron production target. The proton linac consists of an RFQ and a DTL, which is almost the same as the front part of J-PARC linac. However, here only one high-power klystron is used as the RF source to drive the two cavities, which have quite different Q-values and responses. From June 2016, a cPCI based digital feedback system was applied to the iBNCT accelerator. It serves not only as a controller for the feedback of acceleration fields, but also as a smart operator for the auto-tuning of the two cavities in the meantime, especially during the RF startup process to the full power. The details will be described in this report.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Stimulated excitation of an optical cavity by a multi-bunch electron beam via coherent diffraction radiation process
Authors:
Yosuke Honda,
Miho Shimada,
Alexander Aryshev,
Ryukou Kato,
Tsukasa Miyajima,
Takashi Obina,
Ryota Takai,
Takashi Uchiyama,
Naoto Yamamoto
Abstract:
With a low emittance and short-bunch electron beam at a high repetition rate realized by a superconducting linac, stimulated excitation of an optical cavity at the terahertz spectrum range has been shown. The electron beam passed through small holes in the cavity mirrors without being destroyed. A sharp resonance structure which indicated wide-band stimulated emission via coherent diffraction radi…
▽ More
With a low emittance and short-bunch electron beam at a high repetition rate realized by a superconducting linac, stimulated excitation of an optical cavity at the terahertz spectrum range has been shown. The electron beam passed through small holes in the cavity mirrors without being destroyed. A sharp resonance structure which indicated wide-band stimulated emission via coherent diffraction radiation was observed while scanning the round-trip length of the cavity.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
Beam tuning and bunch length measurement in the bunch compression operation at the cERL
Authors:
Yosuke Honda,
Miho Shimada,
Tsukasa Miyajima,
Takahiro Hotei,
Norio Nakamura,
Ryuko Kato,
Takashi Obina,
Ryota Takai,
Kentaro Harada,
Akira Ueda
Abstract:
Realization of a short bunch beam by manipulating the longitudinal phase space distribution with a finite longitudinal dispersion following an off-crest accelera- tion is a widely used technique. The technique was applied in a compact test accelerator of an energy-recovery linac scheme for compressing the bunch length at the return loop. A diagnostic system utilizing coherent transition radiation…
▽ More
Realization of a short bunch beam by manipulating the longitudinal phase space distribution with a finite longitudinal dispersion following an off-crest accelera- tion is a widely used technique. The technique was applied in a compact test accelerator of an energy-recovery linac scheme for compressing the bunch length at the return loop. A diagnostic system utilizing coherent transition radiation was developed for the beam tuning and for estimating the bunch length. By scanning the beam parameters, we experimentally found the best condition for the bunch compression. The RMS bunch length of 250+-50 fs was obtained at a bunch charge of 2 pC. This result confirmed the design and the tuning pro- cedure of the bunch compression operation for the future energy-recovery linac (ERL).
△ Less
Submitted 30 August, 2017;
originally announced September 2017.
