-
On the absence of structure factors in concentrated colloidal suspensions and nanocomposites
Authors:
Anne-Caroline Genix,
Julian Oberdisse
Abstract:
Small-angle scattering is a commonly used tool to analyze the dispersion of nanoparticles in all kinds of matrices. Besides some obvious cases, the associated structure factor is often complex and cannot be reduced to a simple interparticle interaction, like excluded volume only. In recent experiments, we have encountered a surprising absence of structure factors (S(q) = 1) in scattering from rath…
▽ More
Small-angle scattering is a commonly used tool to analyze the dispersion of nanoparticles in all kinds of matrices. Besides some obvious cases, the associated structure factor is often complex and cannot be reduced to a simple interparticle interaction, like excluded volume only. In recent experiments, we have encountered a surprising absence of structure factors (S(q) = 1) in scattering from rather concentrated polymer nanocomposites [A.-C. Genix et al, ACS Appl. Mater. Interfaces 11 (2019) 17863]. In this case, quite pure form factor scattering is observed. This somewhat ``ideal'' structure is further investigated here making use of reverse Monte Carlo simulations in order to shed light on the corresponding nanoparticle structure in space. By fixing the target ``experimental'' apparent structure factor to one over a given q-range in these simulations, we show that it is possible to find dispersions with this property. The influence of nanoparticle volume fraction and polydispersity has been investigated, and it was found that for high concentrations only a high polydispersity allows reaching a state of S = 1. The underlying structure in real space is discussed in terms of the pair-correlation function, which evidences the importance of attractive interactions between polydisperse nanoparticles. The calculation of partial structure factors shows that there is no specific ordering of large or small particles, but that the presence of attractive interactions together with polydispersity allows reaching an almost ``structureless'' state.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
How Tuning Interfaces Impacts the Dynamics and Structure of Polymer Nanocomposites Simultaneously
Authors:
Anne-Caroline Genix,
Vera Bocharova,
Bobby Carroll,
Philippe Dieudonné-George,
Edouard Chauveau,
Alexei Sokolov,
Julian Oberdisse
Abstract:
Fundamental understanding of macroscopic properties of polymer nanocomposites (PNCs) remains difficult due to the complex interplay of microscopic dynamics and structure, namely interfacial layer relaxations and three-dimensional nanoparticle arrangements. The effect of surface modification by alkyl methoxysilanes at different grafting densities has been studied in PNCs made of poly(2-vinylpyridin…
▽ More
Fundamental understanding of macroscopic properties of polymer nanocomposites (PNCs) remains difficult due to the complex interplay of microscopic dynamics and structure, namely interfacial layer relaxations and three-dimensional nanoparticle arrangements. The effect of surface modification by alkyl methoxysilanes at different grafting densities has been studied in PNCs made of poly(2-vinylpyridine) and spherical 20 nm silica nanoparticles (NPs). The segmental dynamics has been probed by broadband dielectric spectroscopy, and the filler structure by small-angle X-ray scattering and reverse Monte Carlo simulations. By combining the particle configurations with the interfacial layer properties, it is shown how surface modification tunes the attractive polymer-particle interactions: bare NPs slow down the polymer interfacial layer dynamics over a thickness of ca. 5 nm, while grafting screens these interactions. Our analysis of interparticle spacing and segmental dynamics provides unprecedented insight into the effect of surface modification on the main characteristics of PNCs: particle interactions and polymer interfacial layers.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics
Authors:
Anne-Caroline Genix,
Vera Bocharova,
Bobby Carroll,
Philippe Dieudonné-George,
Edouard Chauveau,
Alexei Sokolov,
Julian Oberdisse
Abstract:
Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combi…
▽ More
Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C8) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C18) and shorter (C8) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C8-grafting allows for a more progressive tuning, which goes beyond a pure mass effect.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Equilibrium protein adsorption on nanometric vegetable-oil hybrid film/water interface using neutron reflectometry
Authors:
Antigoni Theodoratou,
Lay-Theng Lee,
Julian Oberdisse,
Anne Aubert-Pouëssel
Abstract:
Nanofilms of thickness of about two nanometers have been formed at the air-water interface using functionalized castor oil (ICO) with cross-linkable silylated groups. These hybrid films represent excellent candidates for replacing conventional polymeric materials in biomedical applications, but they need to be optimized in terms of biocompatibility which is highly related to protein adsorption. Ne…
▽ More
Nanofilms of thickness of about two nanometers have been formed at the air-water interface using functionalized castor oil (ICO) with cross-linkable silylated groups. These hybrid films represent excellent candidates for replacing conventional polymeric materials in biomedical applications, but they need to be optimized in terms of biocompatibility which is highly related to protein adsorption. Neutron reflectivity has been used to study the adsorption of two model proteins, bovine serum albumin and lysozyme, at the silylated oil (ICO)-water interface in the absence and presence of salt at physiologic ionic strength and pH and at different protein concentrations. These measurements are compared to adsorption at the air-water interface. While salt enhances adsorption by a similar degree at the air-water and the oil-water interface, the impact of the oil film is significant, with adsorption at the oil-water interface three-to four-fold higher compared to the air-water interface. Under these conditions, the concentration profiles of the adsorbed layers for both proteins indicate multilayer adsorption: The thickness of the outer layer (oil-side) is close to the dimension of the minor axis of the protein molecule, ~ 30 Å, suggesting a side-way orientation with the long axis parallel to the interface. The inner layer extends to 55-60 Å. Interestingly, in all cases, the composition of oil film remains intact without significant protein penetration into the film. The optimal adsorption on these nanofilms, 1.7-2.0 mg$\bullet$m-2 , is comparable to the results obtained recently on thick solid cross-linked films using quartz crystal microbalance and atomic force microscopy, showing in particular that adsorption at these ICO film interfaces under standard physiological conditions is non-specific. These results furnish useful information towards the elaboration of vegetable oil-based nanofilms, in direct nanoscale applications or as precursor films in the fabrication of thicker macroscopic films for biomedical applications. 2
△ Less
Submitted 20 November, 2020;
originally announced November 2020.
-
Partition of Coating Agents between Nanoparticle Interfaces and the Polymer in Nanocomposites
Authors:
Dafne Musino,
Julian Oberdisse,
Michael Sztucki,
Angel Alegria,
Anne-Caroline Genix
Abstract:
Industrial and model polymer nanocomposites are often formulated with coating agents to improve polymer-nanoparticle (NP) compatibility. Here the localization of silane coating agents in styrene-butadiene nanocomposite is investigated through the segmental dynamics of the polymer matrix by broadband dielectric spectroscopy (BDS), allowing the detection of silanes in the matrix through their plasti…
▽ More
Industrial and model polymer nanocomposites are often formulated with coating agents to improve polymer-nanoparticle (NP) compatibility. Here the localization of silane coating agents in styrene-butadiene nanocomposite is investigated through the segmental dynamics of the polymer matrix by broadband dielectric spectroscopy (BDS), allowing the detection of silanes in the matrix through their plasticization effect. This acceleration of dynamics was followed via the shift of $τ$max of the $α$-relaxation induced by the presence of coating agents of different molecular weight and quantity, for different amounts of incorporated colloidal silica NPs (R $\approx$ 12.5 nm, polydispersity 12%). Any noteworthy contribution of interfacial polymer layers on $τ$max has been excluded by reference measurements with bare NPs. Our approach allowed quantifying the partition between the matrix and the NP interfaces, and was confirmed independently by calorimetry. As a control parameter, the silane grafting reaction could be activated or not, which was confirmed by the absence (resp. presence) of partitioning with the matrix. Our main result is that in the first steps of material formulation, before any grafting reaction, coating agents both cover the silica surface by adsorption and mix with the polymer matrix-in particular if the latter has chemical compatibility via its functional groups. Silane adsorption was found to be comparable to the grafted amount (1.1 nm-2), and does not increase further, confirming that the plateau of the adsorption isotherm is reached in industrial formulations. These results are hoped to contribute to a better understanding of the surface reactions taking place during complex formulation processes of nanocomposites, namely the exact amounts at stake, e.g., in industrial mixers. Final material properties are affected both through NP-matrix compatibility and plasticization of the latter by unreacted molecules. 2
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Spatial distribution of core monomers in acrylamide-based core-shell microgels with linear swelling behaviour
Authors:
Marian Cors,
Oliver Wrede,
Lars Wiehemeier,
Artem Feoktystov,
Fabrice Cousin,
Thomas Hellweg,
Julian Oberdisse
Abstract:
The peculiar linear temperature-dependent swelling of core-shell microgels has been conjectured to be linked to the core-shell architecture combining materials of different transition temperatures. Here the structure of pNIPMAM-core and pNNPAM-shell microgels in water is studied as a function of temperature using small-angle neutron scattering with selective deuteration. Photon correlation spectro…
▽ More
The peculiar linear temperature-dependent swelling of core-shell microgels has been conjectured to be linked to the core-shell architecture combining materials of different transition temperatures. Here the structure of pNIPMAM-core and pNNPAM-shell microgels in water is studied as a function of temperature using small-angle neutron scattering with selective deuteration. Photon correlation spectroscopy is used to scrutinize the swelling behaviour of the colloidal particles and reveals linear swelling. Moreover, these experiments are also employed to check the influence of deuteration on swelling. Using a form free multi-shell reverse Monte Carlo approach, the small-angle scattering data are converted into radial monomer density profiles. The comparison of 'core-only' particles consisting of identical cores to fully hydrogenated core-shell microgels, and finally to H core/D shell architectures unambiguously shows that core and shell monomers display gradient profiles with strong interpenetration, leading to cores embedded in shells which are bigger than their isolated 'core only' precursor particles. This surprising result is further generalized to different core cross linker contents, for temperature ranges encompassing both transitions. Our analysis demonstrates that the internal structure of pNIPMAM-core and pNNPAM-shell microgels is heterogeneous and strongly interpenetrated, presumably allowing only progressive core swelling at temperatures intermediate to both transition temperatures, thus promoting linear swelling behaviour.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Recent advances in stimuli-responsive core-shell microgel particles: synthesis, characterisation, and applications
Authors:
Julian Oberdisse,
Thomas Hellweg
Abstract:
Inspired by the path followed by Matthias Ballauff over the past 20 years, the development of thermosensitive core-shell microgel structures is reviewed. Different chemical approaches, from hard nanoparticle cores to double stimuli-responsive microgels have been devised and successfully implemented by many different groups. Some of the rich variety of these systems is presented, as well as some re…
▽ More
Inspired by the path followed by Matthias Ballauff over the past 20 years, the development of thermosensitive core-shell microgel structures is reviewed. Different chemical approaches, from hard nanoparticle cores to double stimuli-responsive microgels have been devised and successfully implemented by many different groups. Some of the rich variety of these systems is presented, as well as some recent progress in structural analysis of such microstructures by small-angle scattering of neutrons or X-rays, including modeling approaches. In the last part, again following early work by the group of Matthias Ballauff, applications with particular emphasis on incorporation of catalytic nanoparticles inside core-shell structures -- stabilizing the nanoparticles and granting external control over activity -- will be discussed, as well as core-shell microgels at interfaces.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Rejuvenating the structure and rheological properties of silica nanocomposites based on natural rubber
Authors:
Kanyarat Boonsomwong,
Anne-Caroline Genix,
Edouard Chauveau,
Jean-Marc Fromental,
Philippe Dieudonne-George,
Chakrit Sirisinha,
Julian Oberdisse
Abstract:
The antagonistic effect of processing and thermal annealing on both the filler structure and the polymer matrix is explored in polymer nanocomposites based on natural rubber with precipitated silica incorporated by coagulation from aqueous suspension followed by roll-milling. Their structure and linear and non-linear rheology have been studied, with a particular emphasis on the effect of high temp…
▽ More
The antagonistic effect of processing and thermal annealing on both the filler structure and the polymer matrix is explored in polymer nanocomposites based on natural rubber with precipitated silica incorporated by coagulation from aqueous suspension followed by roll-milling. Their structure and linear and non-linear rheology have been studied, with a particular emphasis on the effect of high temperature thermal treatment and the number of milling passes. Small-angle X-ray scattering intensities show that the silica is organized in small, unbreakable aggregates containing ca. 50 primary nanoparticles, which are reorganized on a larger scale in filler networks percolating at the highest silica contents. As expected, the filler network structure is found to be sensitive to milling, more milling inducing rupture, as evidenced by the decreasing Payne effect. After thermal treatment, the nanocomposite structure is found to be rejuvenated, erasing the effect of the previous milling on the low-strain modulus. In parallel, the dynamics of the samples described by the rheology or the calorimetric glass-transition temperature remain unchanged, whereas the natural latex polymer network structure is modified by milling towards a more fluid-like rheology, and cannot be recovered.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Aggregate Formation of Surface-Modified Nanoparticles in Solvents and Polymer Nanocomposites
Authors:
Dafne Musino,
Anne-Caroline Genix,
Thomas Chaussee,
Laurent Guy,
Natalia Meissner,
Radoslaw Kozak,
Thomas Bizien,
Julian Oberdisse
Abstract:
A new method based on the combination of small-anglescattering, reverse Monte Carlo simulations, and an aggregate recognition algorithm is proposed to characterize the structure of nanoparticle suspensions in solvents and polymer nanocomposites, allowing detailedstudies of the impact of different nanoparticle surface modifications.Experimental small-angle scattering is reproduced using simulated a…
▽ More
A new method based on the combination of small-anglescattering, reverse Monte Carlo simulations, and an aggregate recognition algorithm is proposed to characterize the structure of nanoparticle suspensions in solvents and polymer nanocomposites, allowing detailedstudies of the impact of different nanoparticle surface modifications.Experimental small-angle scattering is reproduced using simulated annealing of configurations of polydisperse particles in a simulation box compatible with the lowest experimental q-vector. Then, properties of interest likeaggregation states are extracted from these configurations and averaged. This approach has been applied to silane surface-modified silica nanoparticles with different grafting groups, in solvents and after casting into polymer matrices.It is shown that the chemistry of the silane function, in particular mono- or trifunctionality possibly related to patch formation, affects the dispersion state in a given medium, in spite of an unchanged alkylchain length. Our approach may be applied to study any dispersion or aggregation state of nanoparticles. Concerningnanocomposites, the method has potential impact on the design of new formulations allowing controlled tuning of nanoparticle dispersion.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Core-Shell Microgel-Based Surface Coatings with Linear Thermoresponse
Authors:
Marian Cors,
Oliver Wrede,
Anne-Caroline Genix,
Dario Anselmetti,
Julian Oberdisse,
Thomas Hellweg
Abstract:
We study the swelling and shrinking behavior of core-shell microgels adsorbed on silicon wafers. In these systems, the core is made of cross-linked poly(N isopropylmethacrylamide) and the shell consists of cross linked poly(N-n propylacrylamide). In suspension, these particles exhibit an extended linear swelling behavior in the temperature interval between the lower critical solution temperatures…
▽ More
We study the swelling and shrinking behavior of core-shell microgels adsorbed on silicon wafers. In these systems, the core is made of cross-linked poly(N isopropylmethacrylamide) and the shell consists of cross linked poly(N-n propylacrylamide). In suspension, these particles exhibit an extended linear swelling behavior in the temperature interval between the lower critical solution temperatures of the two polymers. Using ellipsometry and AFM, we show that this linear response is also observed in the adsorbed state.
△ Less
Submitted 21 November, 2018;
originally announced November 2018.
-
Recent advances in structural and dynamical propertiesof simplified industrial nanocomposites
Authors:
Anne-Caroline Genix,
Guilhem P. Baeza,
Julian Oberdisse
Abstract:
A large body of experimental work on the microstructure and dynamics of simplifiedindustrial nanocomposites made of disordered silica filler in a styrene-butadiene matrixby solid-phase mixing is regrouped and critically discussed in this feature article. Recentresults encompass systems with varying polymer mass, grafting functionality, and fillercontent. They have been obtained by simulation-based…
▽ More
A large body of experimental work on the microstructure and dynamics of simplifiedindustrial nanocomposites made of disordered silica filler in a styrene-butadiene matrixby solid-phase mixing is regrouped and critically discussed in this feature article. Recentresults encompass systems with varying polymer mass, grafting functionality, and fillercontent. They have been obtained by simulation-based structural modelling of nanoparticleaggregate size and mass deduced from small-angle scattering and transmission electronmicroscopy. Our model has been validated by independent swelling experiments.Comparison of structurally-close nanocomposites of widely different chain mass led tothe identification of a unique structure-determining parameter, the grafting density, aswell as to a unified picture of aggregate formation mechanisms in complex nanocompositesduring mixing. In addition, low-field proton NMR allowed for the characterization ofdynamically slowed-down ('glassy') polymer layers, which were shown not to dominatethe rheological response, unlike the structural contribution. Finally, broadband dielectricspectroscopy was used in an innovative manner to identify filler percolation -- also identifiedby rheology -- via dynamics along filler surfaces.
△ Less
Submitted 20 November, 2018;
originally announced November 2018.
-
Vegetable oil hybrid films cross-linked at the air-water interface: formation kinetics and physical characterization
Authors:
Antigoni Theodoratou,
Laurent Bonnet,
Philippe Dieudonne-George,
Gladys Massiera,
Pascal Etienne,
Jean-Jacques Robin,
Vincent Lapinte,
Joel Chopineau,
Julian Oberdisse,
Anne Aubert-Pouessel
Abstract:
Vegetable oil based hybrid films were developed thanks to a novel solvent- and heating- free method at the air-water interface using silylated castor oil cross-linked via a sol-gel reaction. To understand the mechanism of the hybrid film formation, the reaction kinetics was studied in detail by using complementary techniques: rheology, thermogravimetric analysis, and infrared spectroscopy. The mec…
▽ More
Vegetable oil based hybrid films were developed thanks to a novel solvent- and heating- free method at the air-water interface using silylated castor oil cross-linked via a sol-gel reaction. To understand the mechanism of the hybrid film formation, the reaction kinetics was studied in detail by using complementary techniques: rheology, thermogravimetric analysis, and infrared spectroscopy. The mechanical properties of the final films were investigated by nano-indentation, whereas their structure was studied using a combination of wide-angle X-ray scattering, electron diffraction, and atomic force microscopy. We found that solid and transparent films form in 24 hours and, by changing the silica precursor to castor oil ratio, their mechanical properties are tunable in the MPa-range by about a factor of twenty. In addition to that, a possible optimization of the cross-linking reaction with different catalysts was explored and finally, cytotoxicity tests were performed on fibroblasts proving the absence of film toxicity. The results of this work pave the way to a straightforward synthesis of castor-oil films with tunable mechanical properties: hybrid films cross-linked at the air-water interface combine an easy and cheap spreading protocol with the features of their thermal history optimized for possible future micro/nano drug loading, thus representing excellent candidates for the replacement of non-environment friendly petroleum-based materials.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Viscoelasticity of colloidal polycrystals doped with impurities
Authors:
Ameur Louhichi,
Elisa Tamborini,
Julian Oberdisse,
Luca Cipelletti,
Laurence Ramos
Abstract:
We investigate how the microstructure of a colloidal polycrystal influences its linear viscoelasticity. We use thermosensitive copolymer micelles that arrange in water in a cubic crystalline lattice, yielding a colloidal polycrystal. The polycrystal is doped with a small amount of nanoparticles, of size comparable to that of the micelles, which behave as impurities and thus partially segregate in…
▽ More
We investigate how the microstructure of a colloidal polycrystal influences its linear viscoelasticity. We use thermosensitive copolymer micelles that arrange in water in a cubic crystalline lattice, yielding a colloidal polycrystal. The polycrystal is doped with a small amount of nanoparticles, of size comparable to that of the micelles, which behave as impurities and thus partially segregate in the grain boundaries. We show that the shear elastic modulus only depends on the packing of the micelles and does not vary neither with the presence of nanoparticles nor with the crystal microstructure. By contrast, we find that the loss modulus is strongly affected by the presence of nanoparticles. A comparison between rheology data and small-angle neutron scattering data suggests that the loss modulus is dictated by the total amount of nanoparticles in the grain boundaries, which in turn depends on the sample microstructure.
△ Less
Submitted 26 September, 2015;
originally announced September 2015.
-
Tuning Structure and Rheology of Silica-Latex Nanocomposites with the Molecular Weight of Matrix Chains: A Coupled SAXS-TEM-Simulation Approach
Authors:
Amélie Banc,
Anne-Caroline Genix,
Mathieu CHIRAT,
Christelle Dupas,
Sylvain Caillol,
Michael Sztucki,
Julian OBERDISSE
Abstract:
The structure of silica-latex nanocomposites of three matrix chain masses (20, 50, and 160 kg/mol of poly(ethyl methacrylate)) are studied using a SAXS/TEM approach, coupled via Monte Carlo simulations of scattering of fully polydisperse silica nanoparticle aggregates. At low silica concentrations (1 vol. %), the impact of the matrix chain mass on the structure is quantified in terms of the aggreg…
▽ More
The structure of silica-latex nanocomposites of three matrix chain masses (20, 50, and 160 kg/mol of poly(ethyl methacrylate)) are studied using a SAXS/TEM approach, coupled via Monte Carlo simulations of scattering of fully polydisperse silica nanoparticle aggregates. At low silica concentrations (1 vol. %), the impact of the matrix chain mass on the structure is quantified in terms of the aggregation number distribution function, highest mass leading to individual dispersion, whereas the lower masses favor the formation of small aggregates. Both simulations for SAXS and TEM give compatible aggregate compacities around 10 vol. %, indicating that the construction algorithm for aggregates is realistic. Our results on structure are rationalized in terms of the critical collision time between nanoparticles due to diffusion in viscous matrices. At higher concentrations, aggregates overlap and form a percolated network, with a smaller and lighter mesh in the presence of high mass polymers. The linear rheology is investigated with oscillatory shear experiments. It shows a feature related to the silica structure at low frequencies, the amplitude of which can be described by two power laws separated by the percolation threshold of aggregates.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
Multiscale Filler Structure in Simplified Industrial Nanocomposite Silica/SBR Systems Studied by SAXS and TEM
Authors:
Guilhem Baeza,
ANNE-CAROLINE GENIX,
Christophe Degrandcourt,
Laurent Petitjean,
Jérémie Gummel,
Marc Couty,
Julian OBERDISSE
Abstract:
Simplified silica (Zeosil 1165 MP) and SBR (140k carrying silanol end-groups) nanocomposites have been formulated by mixing of a reduced number of ingredients with respect to industrial applications. The thermo-mechanical history of the samples during the mixing process was monitored and adjusted to identical final temperatures. The filler structure on large scales up to micrometers was studied by…
▽ More
Simplified silica (Zeosil 1165 MP) and SBR (140k carrying silanol end-groups) nanocomposites have been formulated by mixing of a reduced number of ingredients with respect to industrial applications. The thermo-mechanical history of the samples during the mixing process was monitored and adjusted to identical final temperatures. The filler structure on large scales up to micrometers was studied by transmission electron microscopy (TEM) and very small-angle X-ray scattering (SAXS). A complete quantitative model extending from the primary silica nanoparticle (of radius \approx 10 nm), to nanoparticles aggregates, up to micrometer-sized branches with typical lateral dimension of 150 nm is proposed. Image analysis of the TEM-pictures yields the fraction of zones of pure polymer, which extend between the branches of a large-scale filler network. This network is compatible with a fractal of average dimension 2.4 as measured by scattering. On smaller length scales, inside the branches, small silica aggregates are present. Their average radius has been deduced from a Kratky analysis, and it ranges between 35 and 40 nm for all silica fractions investigated here (φ_si = 8-21% vol.). A central piece of our analysis is the description of the interaggregate interaction by a simulated structure factor for polydisperse spheres representing aggregates. A polydispersity of 30% in aggregate size is assumed, and interactions between these aggregates are described with a hard core repulsive potential. The same distribution in size is used to evaluate the polydisperse form factor. Comparison with the experimental intensity leads to the determination of the average aggregate compacity (assumed identical for all aggregates in the distribution, between 31% and 38% depending on φ_si), and thus aggregation number (ca. 45, with a large spread). Because of the effect of aggregate compacity and of pure polymer zones, the volume fraction of aggregates is higher in the branches than φ_si. The repulsion between aggregates has a strong effect on the apparent isothermal compressibility: it leads to a characteristic low-q depression, which cannot be interpreted as aggregate mass decrease in our data. In addition, the reinforcement effect of these silica structures in the SBR-matrix is characterized with oscillatory shear and described with a model based on the same aggregate compacity. Finally, our results show that it is possible to analyze the complex structure of interacting aggregates in nanocomposites of industrial origin in a self-consistent and quantitative manner.
△ Less
Submitted 20 December, 2012;
originally announced December 2012.
-
Nucleation and growth of micellar polycrystals under time-dependent volume fraction conditions
Authors:
A. Louhichi,
E. Tamborini,
N. Ghofraniha,
F. Caton,
D. Roux,
J. Oberdisse,
L. Cipelletti,
L. Ramos
Abstract:
We study the freezing kinetics of colloidal polycrystals made of micelles of Pluronic F108, a thermosensitive copolymer, to which a small amount of silica nanoparticles of size comparable to that of the micelles are added. We use rheology and calorimetry to measure Tc, the crystallization temperature, and find that Tc increases with the heating rate \dot{T} used to crystallize the sample. To ratio…
▽ More
We study the freezing kinetics of colloidal polycrystals made of micelles of Pluronic F108, a thermosensitive copolymer, to which a small amount of silica nanoparticles of size comparable to that of the micelles are added. We use rheology and calorimetry to measure Tc, the crystallization temperature, and find that Tc increases with the heating rate \dot{T} used to crystallize the sample. To rationalize our results, we first use viscosity measurements to establish a linear map** between temperature T and the effective volume fraction, φ, of the micelles, treated as hard spheres. Next, we reproduce the experimental \dot{T} dependence of the crystallization temperature with numerical calculations based on standard models for the nucleation and growth of hard spheres crystals, classical nucleation theory and the Johnson-Mehl-Avrami-Kolmogorov theory. The models have been adapted to account for the peculiarities of our experiments: the presence of nanoparticles that are expelled in the grain boundaries, and the steady increase of T and hence φ during the experiment. We moreover show that the polycrystal grain size obtained from the calculations is in good agreement with light microscopy data. Finally, we find that the φ dependence of the nucleation rate for the micellar polycrystal is in remarkable quantitative agreement with that found in previous experiments on colloidal hard spheres. These results suggests that deep analogies exist between hard-sphere colloidal crystals and Pluronics micellar crystals, in spite of the difference in particle softness. More generally, our results demonstrate that crystallization processes can be quantitatively probed using standard rheometry.
△ Less
Submitted 15 March, 2013; v1 submitted 17 December, 2012;
originally announced December 2012.
-
Structure of nanoparticles embedded in micellar polycrystals
Authors:
Elisa Tamborini,
Neda Ghofraniha,
Julian Oberdisse,
Luca Cipelletti,
Laurence Ramos
Abstract:
We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low te…
▽ More
We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low temperature (T ~ 0°C), and self-assembles into micelles at room temperature, where the block-copolymer is amphiphilic. We use contrast matching small-angle neuron scattering experiments to probe independently the structure of the nanoparticles and that of the polymer. We find that the nanoparticles do not perturb the crystalline order. In addition, a structure peak is measured for the silica nanoparticles dispersed in the polycrystalline samples. This implies that the samples are spatially heterogeneous and comprise, without macroscopic phase separation, silica-poor and silica-rich regions. We show that the nanoparticle concentration in the silica-rich regions is about tenfold the average concentration. These regions are grain boundaries between crystallites, where nanoparticles concentrate, as shown by static light scattering and by light microscopy imaging of the samples. We show that the temperature rate at which the sample is prepared strongly influence the segregation of the nanoparticles in the grain-boundaries.
△ Less
Submitted 21 May, 2012;
originally announced May 2012.
-
Grain refinement and partitioning of impurities in the grain boundaries of a colloidal polycrystal
Authors:
Neda Ghofraniha,
Elisa Tamborini,
Julian Oberdisse,
Luca Cipelletti,
Laurence Ramos
Abstract:
We study the crystallization of a colloidal model system in presence of secondary nanoparticles acting as impurities. Using confocal microscopy, we show that the nanoparticles segregate in the grain boundaries of the colloidal polycrystal. We demonstrate that the texture of the polycrystal can be tuned by varying independently the nanoparticle volume fraction and the crystallization rate, and quan…
▽ More
We study the crystallization of a colloidal model system in presence of secondary nanoparticles acting as impurities. Using confocal microscopy, we show that the nanoparticles segregate in the grain boundaries of the colloidal polycrystal. We demonstrate that the texture of the polycrystal can be tuned by varying independently the nanoparticle volume fraction and the crystallization rate, and quantify our findings using standard models for the nucleation and growth of crystalline materials. Remarkably, we find that the efficiency of the segregation of the nanoparticles in the grain-boundaries is determined solely by the typical size of the crystalline grains.
△ Less
Submitted 29 March, 2012;
originally announced March 2012.
-
Modeling of Intermediate Structures and Chain Conformation in Silica-Latex Nanocomposites Observed by SANS During Annealing
Authors:
Anne-Caroline Genix,
Mouna TATOU,
Ainara Imaz,
Jacqueline Forcada,
Ralph Schweins,
Isabelle Grillo,
Julian Oberdisse
Abstract:
The evolution of the polymer structure during nanocomposite formation and annealing of silica-latex nanocomposites is studied using contrast-variation small angle neutron scattering. The experimental system is made of silica nanoparticles (Rsi \approx 8 nm) and a mixture of purpose-synthesized hydrogenated and deuterated nanolatex (Rlatex \approx 12.5 nm). The progressive disappearance of the late…
▽ More
The evolution of the polymer structure during nanocomposite formation and annealing of silica-latex nanocomposites is studied using contrast-variation small angle neutron scattering. The experimental system is made of silica nanoparticles (Rsi \approx 8 nm) and a mixture of purpose-synthesized hydrogenated and deuterated nanolatex (Rlatex \approx 12.5 nm). The progressive disappearance of the latex beads by chain interdiffusion and release in the nanocomposites is analyzed quantitatively with a model for the scattered intensity of hairy latex beads and an RPA description of the free chains. In silica-free matrices and nanocomposites of low silica content (7%v), the annealing procedure over weeks at up to Tg + 85 K results in a molecular dispersion of chains, the radius of gyration of which is reported. At higher silica content (20%v), chain interdiffusion seems to be slowed down on time-scales of weeks, reaching a molecular dispersion only at the strongest annealing. Chain radii of gyration are found to be unaffected by the presence of the silica filler.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.
-
Superstructures par agrégation contrôlée de nanocolloïdes: caractérisation structurale par diffusion de neutrons aux petits angles et simulation numérique
Authors:
Jean-Francois Berret,
Julian Oberdisse
Abstract:
The complexation of micelles or charged nanoparticles with neutral-charged block copolymers in aqueous solutions leads to the formation of colloidal superstructures also termed 'colloidal complexes'. Their primary interest relies in their monodispersity in size, and in their increased domain of stability. In this review, the structural characterization by dynamic light scattering, cryo-TEM, and sm…
▽ More
The complexation of micelles or charged nanoparticles with neutral-charged block copolymers in aqueous solutions leads to the formation of colloidal superstructures also termed 'colloidal complexes'. Their primary interest relies in their monodispersity in size, and in their increased domain of stability. In this review, the structural characterization by dynamic light scattering, cryo-TEM, and small angle neutron scattering is presented. Small angle neutron scattering results have been analyzed using numerical simulations - Monte Carlo or reverse Monte Carlo (RMC). Such simulations are useful to show the compatibility between different models of colloidal superstructures, and experiment. Our results have allowed us to propose a generic structure of complex colloids, made of a dense core of interacting colloids, bridged by polyelectrolyte blocks, and a hydrated corona. We have shown that such superstructures are formed systematically in these systems, with either micelles or nanoparticles, for different copolymers, and different charges. The text is in French.
△ Less
Submitted 1 February, 2011;
originally announced February 2011.
-
Une brève introduction à la matière molle
Authors:
Fabrice Cousin,
Isabelle Grillo,
Jacques Jestin,
Julian Oberdisse
Abstract:
A short introduction to soft condensed matter (polymers, colloids, surfactants) is presented, with particular emphasis to recent progres and applications of small angle scattering. The text is in French.
A short introduction to soft condensed matter (polymers, colloids, surfactants) is presented, with particular emphasis to recent progres and applications of small angle scattering. The text is in French.
△ Less
Submitted 1 February, 2011;
originally announced February 2011.
-
Small-Angle Neutron Scattering study of solubilization of tributyl phosphate in aqueous solutions of L64 Pluronic triblock copolymers
Authors:
Jeremy Causse,
Julian Oberdisse,
Jacques Jestin,
Serge Lagerge
Abstract:
We have studied the solubilization behaviour of tributylphosphate (TBP) in aqueous solutions of L64-Pluronics, using light and small angle neutron scattering (SANS). Varying the temperature and the oil-content, the system presents a non trivial phase behaviour. In particular, at 308K, a first solubilization followed by an emulsification failure and a resolubilization is found. We have measured the…
▽ More
We have studied the solubilization behaviour of tributylphosphate (TBP) in aqueous solutions of L64-Pluronics, using light and small angle neutron scattering (SANS). Varying the temperature and the oil-content, the system presents a non trivial phase behaviour. In particular, at 308K, a first solubilization followed by an emulsification failure and a resolubilization is found. We have measured the microstructure by SANS and characterized the microemulsion droplet core-size, corona-thickness, polydispersity, and interactions. It is shown that at low oil content, the system is made of small swollen micelles. After the phase separation, the resolubilization is carried by larger oil droplets decorated by copolymer. From specific surface measurements at large angles, a surprising change in surfactant conformation is found to accompany this morphological evolution which is also supported by previous results obtained from 1H NMR experiments. In independent measurements, our structural modelling is confirmed using contrast-variation SANS.
△ Less
Submitted 4 December, 2010;
originally announced December 2010.
-
Microemulsion nanocomposites: phase diagram, rheology and structure using a combined small angle neutron scattering and reverse Monte Carlo approach
Authors:
Nicolas Puech,
Serge Mora,
Ty Phou,
Gregoire Porte,
Jacques Jestin,
Julian Oberdisse
Abstract:
The effect of silica nanoparticles on transient microemulsion networks made of microemulsion droplets and telechelic copolymer molecules in water is studied, as a function of droplet size and concentration, amount of copolymer, and nanoparticle volume fraction. The phase diagram is found to be affected, and in particular the percolation threshold characterized by rheology is shifted upon addition…
▽ More
The effect of silica nanoparticles on transient microemulsion networks made of microemulsion droplets and telechelic copolymer molecules in water is studied, as a function of droplet size and concentration, amount of copolymer, and nanoparticle volume fraction. The phase diagram is found to be affected, and in particular the percolation threshold characterized by rheology is shifted upon addition of nanoparticles, suggesting participation of the particles in the network. This leads to a peculiar reinforcement behaviour of such microemulsion nanocomposites, the silica influencing both the modulus and the relaxation time. The reinforcement is modelled based on nanoparticles connected to the network via droplet adsorption. Contrast-variation Small Angle Neutron Scattering coupled to a reverse Monte Carlo approach is used to analyse the microstructure. The rather surprising intensity curves are shown to be in good agreement with the adsorption of droplets on the nanoparticle surface.
△ Less
Submitted 4 December, 2010;
originally announced December 2010.
-
Effect of Nanoparticle Size on the Morphology of Adsorbed Surfactant Layers
Authors:
Dersy Lugo,
Julian Oberdisse,
Alain Lapp,
Gerhard Findenegg
Abstract:
The surface aggregates structure of dimethyldodecylamine-N-oxide (C12DAO) in three silica dispersions of different particle sizes (16 - 42 nm) was studied by small-angle neutron scattering (SANS) in a H2O/D2O solvent mixture matching the silica. At the experimental conditions (pH 9) the surfactant exists in its nonionic form and the structure of the adsorbed layer is not affected by added electrol…
▽ More
The surface aggregates structure of dimethyldodecylamine-N-oxide (C12DAO) in three silica dispersions of different particle sizes (16 - 42 nm) was studied by small-angle neutron scattering (SANS) in a H2O/D2O solvent mixture matching the silica. At the experimental conditions (pH 9) the surfactant exists in its nonionic form and the structure of the adsorbed layer is not affected by added electrolyte. It is found that C12DAO forms spherical surface micelles of 2 nm diameter on the 16 nm silica particles, but oblate ellipsoidal surface micelles are formed on the 27 and 42 nm particles. The dimensions of these oblate surface aggregates (minor and major semi-axes Rn and Rlat) are similar to those of C12DAO micelles in the aqueous solutions. It is concluded that the morphological transition from spherical to ellipsoidal surface aggregates is induced by the surface curvature of the silica particles. A comparison of the shape and dimensions of the surface aggregates formed by C12DAO and C12E5 on the 16 nm silica particles demonstrates that the nature of the surfactant head group does not determine the morphology of the surface aggregates, but has a strong influence on the number of surface aggregates per particle, due to the different interactions of the head groups with the silica surface.
△ Less
Submitted 30 August, 2010;
originally announced August 2010.
-
Surface Aggregate Structure of Nonionic Surfactants on Silica Nanoparticles
Authors:
Dersy Lugo,
Julian Oberdisse,
Matthias Karg,
Ralf Schweins,
Gerhard Findenegg
Abstract:
The self-assembly of two nonionic surfactants, pentaethylene glycol monododecyl ether (C12E5) and n-dodecyl-ß-maltoside (ß-C12G2), in the presence of a purpose-synthesized silica sol of uniform particle size (diameter 16 nm) has been studied by adsorption measurements, dynamic light scattering and small-angle neutron scattering (SANS) using a H2O/D2O mixture matching the silica, in order to highli…
▽ More
The self-assembly of two nonionic surfactants, pentaethylene glycol monododecyl ether (C12E5) and n-dodecyl-ß-maltoside (ß-C12G2), in the presence of a purpose-synthesized silica sol of uniform particle size (diameter 16 nm) has been studied by adsorption measurements, dynamic light scattering and small-angle neutron scattering (SANS) using a H2O/D2O mixture matching the silica, in order to highlight the structure of the surfactant aggregates. For C12E5 strong aggregative adsorption onto the silica beads, with a high plateau value of the adsorption isotherm above the CMC was found. SANS measurements were made at a series of loadings, from zero surfactant up to maximum surface coverage. It is found that the spherical core-shell model nicely reproduces the SANS data up to and including the local maximum at q = 0.42 nm-1 but not in the Porod region of high q, indicating that the surface area of the adsorbed surfactant is underestimated by the model of a uniform adsorbed layer. A satisfactory representation of the entire scattering profiles is obtained with the model of micelle-decorated silica beads, indicating that C12E5 is adsorbed as spherical micellar aggregates. This behaviour is attributed to the high surface curvature of the silica which prevents an effective packing of the hydrophobic chains of the amphiphile in a bilayer configuration. For the maltoside surfactant ß-C12G2 very weak adsorption on the silica beads was found. The SANS profile indicates that this surfactant forms oblate ellipsoidal micelles in the silica dispersion, as in the absence of the silica beads.
△ Less
Submitted 26 August, 2010;
originally announced August 2010.
-
Anisotropic Reinforcement of Nanocomposites Tuned by Magnetic Orientation of the Filler Network
Authors:
Jacques Jestin,
Fabrice Cousin,
Isabelle Dubois,
Christine Ménager,
Ralph Schweins,
Julian Oberdisse,
François Boué
Abstract:
We present a new material which displays anisotropic and mechanical properties tuneable during synthesis under magnetic field. It is formulated by mixing aqueous suspensions of polymer nanolatex and magnetic nanoparticles, coated by a thin silica layer to improve their compatibility with the polymeric matrix, followed by casting. The magnetic properties of these nanoparticles enable their pre-or…
▽ More
We present a new material which displays anisotropic and mechanical properties tuneable during synthesis under magnetic field. It is formulated by mixing aqueous suspensions of polymer nanolatex and magnetic nanoparticles, coated by a thin silica layer to improve their compatibility with the polymeric matrix, followed by casting. The magnetic properties of these nanoparticles enable their pre-orientation in the resulting nanocomposite when cast under magnetic field. Detailed insight on dispersion by Small Angle Neutron Scattering (SANS) shows chainlike nanoparticle aggregates aligned by the field on the nanometer scale. Applying strain to the nanocomposite parallel to the particle chains shows higher mechanical reinforcement, than when strain is transverse to field. . SANS from strained samples shows that strain parallel to the field induce an organization of the chains while strain perpendicular to the field destroys the chain field-induced ordering. Thus improved mechanical reinforcement is obtained from anisotropic interconnection of nanoparticle aggregates.
△ Less
Submitted 6 April, 2009;
originally announced April 2009.
-
Universal scattering behavior of co-assembled nanoparticle-polymer clusters
Authors:
J. Fresnais,
J. -F. Berret,
L. Qi,
J. -P. Chapel,
J. -C. Castaing,
O. Sandre,
B. Frka-Petesic,
R. Perzynski,
J. Oberdisse,
F. Cousin
Abstract:
Water-soluble clusters made from 7 nm inorganic nanoparticles have been investigated by small-angle neutron scattering. The internal structure factor of the clusters was derived and exhibited a universal behavior as evidenced by a correlation hole at intermediate wave-vectors. Reverse Monte-Carlo calculations were performed to adjust the data and provided an accurate description of the clusters…
▽ More
Water-soluble clusters made from 7 nm inorganic nanoparticles have been investigated by small-angle neutron scattering. The internal structure factor of the clusters was derived and exhibited a universal behavior as evidenced by a correlation hole at intermediate wave-vectors. Reverse Monte-Carlo calculations were performed to adjust the data and provided an accurate description of the clusters in terms of interparticle distance and volume fraction. Additional parameters influencing the microstructure were also investigated, including the nature and thickness of the nanoparticle adlayer.
△ Less
Submitted 23 February, 2009;
originally announced February 2009.
-
Engineering solid-like structures via an arrested spinodal decomposition
Authors:
Thomas Gibaud,
Anna Stradner,
Julian Oberdisse,
Peter Lindner,
Jan Skov Pedersen,
Cristiano L. P. Oliveira,
Peter Schurtenberger
Abstract:
The possibilities to tune the structure of solid like material resulting from arrested spinodal decomposition is investigated using a system composed of lysozyme, a globular protein, dispersed in a water solution as model system for colloids with short range attraction. It is shown that the resulting arrested spinodal decomposition is driven by the interplay between the early kinetics of the spi…
▽ More
The possibilities to tune the structure of solid like material resulting from arrested spinodal decomposition is investigated using a system composed of lysozyme, a globular protein, dispersed in a water solution as model system for colloids with short range attraction. It is shown that the resulting arrested spinodal decomposition is driven by the interplay between the early kinetics of the spinodal decomposition and the dynamical arrest. The initial concentration, the quench depth and speed from the fluid state to the arrested state enable to tailor the mesh size of the solid network of the arrested spinodal decomposition.
△ Less
Submitted 26 January, 2009;
originally announced January 2009.
-
Structure and rheological properties of model microemulsion networks filled with nanoparticles
Authors:
Nicolas Puech,
Serge Mora,
Vincent Testard,
Grégoire Porte,
Christian Ligoure,
Isabelle Grillo,
Ty Phou,
Julian Oberdisse
Abstract:
Model microemulsion networks of oil droplets stabilized by non ionic surfactant and telechelic polymer C18-PEO(10k)-C18 have been studied for two droplet-to-polymer size ratios. The rheological properties of the networks have been measured as a function of network connectivity and can be described in terms of simple percolation laws. The network structure has been characterised by Small Angle Ne…
▽ More
Model microemulsion networks of oil droplets stabilized by non ionic surfactant and telechelic polymer C18-PEO(10k)-C18 have been studied for two droplet-to-polymer size ratios. The rheological properties of the networks have been measured as a function of network connectivity and can be described in terms of simple percolation laws. The network structure has been characterised by Small Angle Neutron Scattering. A Reverse Monte Carlo approach is used to demonstrate the interplay of attraction and repulsion induced by the copolymer. These model networks are then used as matrix for the incorporation of silica nanoparticles (R=10nm), individual dispersion being checked by scattering. A strong impact on the rheological properties is found for silica volume fractions up to 9%.
△ Less
Submitted 25 June, 2008;
originally announced June 2008.
-
A double supermirror monochromator for neutron instrumentation at LLB
Authors:
Sylvain Desert,
Vincent Thevenot,
Andre Gabriel,
Patrice Permingeat,
Julian Oberdisse,
Annie Brulet
Abstract:
The design and characteristics of a double supermirror monochromator for neutron instrumentation at the Laboratoire Leon Brillouin is described. The aim of this monochromator is to reduce the intense gamma-radiation produced by conventional velocity selectors and to avoid a direct view of the guide while kee** a comparable neutron transmission (higher than 70%). The monochromator offers a cont…
▽ More
The design and characteristics of a double supermirror monochromator for neutron instrumentation at the Laboratoire Leon Brillouin is described. The aim of this monochromator is to reduce the intense gamma-radiation produced by conventional velocity selectors and to avoid a direct view of the guide while kee** a comparable neutron transmission (higher than 70%). The monochromator offers a continuous choice of wavelength selection in the range 0.5 to 2 nm.
△ Less
Submitted 19 October, 2007;
originally announced October 2007.
-
Characterization of the Core-Shell Nanoparticles Formed as Soluble Hydrogen-Bonding Interpolymer Complexes at low pH
Authors:
Maria Sotiropoulou,
Frederic Bossard,
Eric Balnois,
Julian Oberdisse,
Georgios Staikos
Abstract:
The formation of soluble hydrogen-bonding interpolymer complexes between poly(acrylic acid) (PAA) and poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid)-graft-poly(N, N dimethylacrylamide) (P(AA-co-AMPSA)-g-PDMAM) at pH = 2.0 was studied. A viscometric study showed that in semidilute solution a physical gel is formed, due to the interconnection of the anionic P(AA-co-AMPSA) back…
▽ More
The formation of soluble hydrogen-bonding interpolymer complexes between poly(acrylic acid) (PAA) and poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid)-graft-poly(N, N dimethylacrylamide) (P(AA-co-AMPSA)-g-PDMAM) at pH = 2.0 was studied. A viscometric study showed that in semidilute solution a physical gel is formed, due to the interconnection of the anionic P(AA-co-AMPSA) backbone of the graft copolymer, in a transient network, by means of the complexes formed between the PDMAM side chains of the graft copolymer and PAA. Dynamic and static light scattering measurements, in conjunction with small angle neutron scattering measurements, suggest the formation of core-shell colloidal nanoparticles in dilute solution, comprised by an insoluble PAA/PDMAM core surrounded by an anionic P(AA-co-AMPSA) corona. Even if larger clusters are formed in semidilute solution, the size of the insoluble core remains practically stable. Atomic force microscopy performed under ambient conditions, reveal that the particles collapse and flatten upon deposition on a substrate, with dimensions close to the ones of the dry hydrophobic core.
△ Less
Submitted 15 September, 2007;
originally announced September 2007.
-
Insertion of a magnesium(II)-octacarboranyl(hexylsulfanyl) porphyrazine into liposomes: a physico-chemical study
Authors:
Anna Salvati,
Sandra Ristori,
Daniela Pietrangeli,
Julian Oberdisse,
Luca Calamai,
Giacomo Martini,
Giampaolo Ricciardi
Abstract:
The synthesis, characterization and liposome insertion of a novel magnesium(II) carboranyl-porphyrazine, i.e. [2,3,7,8,12,13,17,18-octakis- (1,2-dicarba-closo-dodecaboranyl)-hexylthio-5,10,15,20- porphyrazine]magnesium(II) complex, MgHECSPz, is described. MgHECSPz was designed to improve the potentiality in multiple approach anticancer therapy. Liposomal formulations with different surface charg…
▽ More
The synthesis, characterization and liposome insertion of a novel magnesium(II) carboranyl-porphyrazine, i.e. [2,3,7,8,12,13,17,18-octakis- (1,2-dicarba-closo-dodecaboranyl)-hexylthio-5,10,15,20- porphyrazine]magnesium(II) complex, MgHECSPz, is described. MgHECSPz was designed to improve the potentiality in multiple approach anticancer therapy. Liposomal formulations with different surface charge were prepared as delivering agents. The obtained loaded vectors were characterized by DLS, SAXS, SANS and ζpotential measurements in order to define the overall properties and structural details of loaded liposomes.
△ Less
Submitted 7 September, 2007;
originally announced September 2007.
-
Small Angle Scattering and Zeta Potential of Liposomes Loaded with Octa(carboranyl)porphyrazine
Authors:
Anna Salvati,
Sandra Ristori,
Julian Oberdisse,
Olivier Spalla,
Giampaolo Ricciardi,
Daniela Pietrangeli,
Mauro Giustini,
Giacomo Martini
Abstract:
In this work the physicochemical characterization of liposomes loaded with a newly synthesised carboranyl porphyrazine (H2HECASPz) is described. This molecule represents a potential drug for different anticancer therapies, such as Boron Neutron Capture Therapy, Photodynamic Therapy and Photothermal Therapy. Different loading methods and different lipid mixtures were tested. The corresponding loa…
▽ More
In this work the physicochemical characterization of liposomes loaded with a newly synthesised carboranyl porphyrazine (H2HECASPz) is described. This molecule represents a potential drug for different anticancer therapies, such as Boron Neutron Capture Therapy, Photodynamic Therapy and Photothermal Therapy. Different loading methods and different lipid mixtures were tested. The corresponding loaded vectors were studied by Small Angle Scattering (SANS and SAXS), light scattering and zeta potential. The combined analysis of structural data at various length scales and the measurement of the surface charge allowed to obtain a detailed characterization of the investigated systems. The mechanisms underlying the onset of differences in relevant physicochemical parameters (size, polydispersity and charge) were also critically discussed.
△ Less
Submitted 6 September, 2007;
originally announced September 2007.
-
The new very small angle neutron scattering spectrometer at Laboratoire Leon Brillouin
Authors:
Sylvain Desert,
Vincent Thevenot,
Julian Oberdisse,
Annie Brulet
Abstract:
The design and characteristics of the new very small angle neutron scattering spectrometer under construction at the Laboratoire Leon Brillouin is described. Its goal is to extend the range of scattering vectors magnitudes towards 2x10{-4} /A. The unique feature of this new spectrometer is a high resolution two dimensional image plate detector sensitive to neutrons. The wavelength selection is a…
▽ More
The design and characteristics of the new very small angle neutron scattering spectrometer under construction at the Laboratoire Leon Brillouin is described. Its goal is to extend the range of scattering vectors magnitudes towards 2x10{-4} /A. The unique feature of this new spectrometer is a high resolution two dimensional image plate detector sensitive to neutrons. The wavelength selection is achieved by a double reflection supermirror monochromator and the collimator uses a novel multibeam design.
△ Less
Submitted 12 June, 2007;
originally announced June 2007.
-
Characterization of the Soluble Nanoparticles Formed through Coulombic Interaction of Bovine Serum Albumin with Anionic Graft Copolymers at Low pH
Authors:
Evaggelia Serefoglou,
Julian Oberdisse,
Georgios Staikos
Abstract:
A static light scattering (SLS) study of bovine serum albumin (BSA) mixtures with two anionic graft copolymers of poly (sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly (N, N-dimethylacrylamide), with a high composition in poly (N, N-dimethylacrylamide) (PDMAM) side chains, revealed the formation of oppositely charged complexes, at pH lower than 4.9, the isoelectri…
▽ More
A static light scattering (SLS) study of bovine serum albumin (BSA) mixtures with two anionic graft copolymers of poly (sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly (N, N-dimethylacrylamide), with a high composition in poly (N, N-dimethylacrylamide) (PDMAM) side chains, revealed the formation of oppositely charged complexes, at pH lower than 4.9, the isoelectric point of BSA. The core-corona nanoparticles formed at pH = 3.00, were characterized. Their molecular weight and radius of gyration were determined by SLS, while their hydrodynamic radius was determined by dynamic light scattering. Small angle neutron scattering measurements were used to determine the radius of the insoluble complexes, comprising the core of the particles. The values obtained indicated that their size and aggregation number of the nanoparticles, were smaller when the content of the graft copolymers in neutral PDMAM side chains was higher. Such particles should be interesting drug delivery candidates, if the gastrointestinal tract was to be used.
△ Less
Submitted 25 May, 2007;
originally announced May 2007.
-
Adsorption and grafting on colloidal interfaces studied by scattering techniques
Authors:
Julian Oberdisse
Abstract:
The adsorption of polymer and surfactant molecules onto colloidal particles or droplets in solution can be characterized non-destructively by scattering techniques. In a first part, the general framework of Dynamic Light Scattering, Small Angle Neutron and X-ray Scattering for the determination of the structure of adsorbed layers, and namely of the density profile, is presented. We then review r…
▽ More
The adsorption of polymer and surfactant molecules onto colloidal particles or droplets in solution can be characterized non-destructively by scattering techniques. In a first part, the general framework of Dynamic Light Scattering, Small Angle Neutron and X-ray Scattering for the determination of the structure of adsorbed layers, and namely of the density profile, is presented. We then review recent studies of layers of the model polymer poly(ethylene oxide), as homopolymer or part of a block copolymer. In this field, scattering with contrast variation has been shown to be a powerful tool to obtain a detailed description of the layer structure. Adsorption of chemically more complex systems, including polyelectrolytes, polymer complexes, grafted chains and biomacromolecules are also discussed in this review, as well as surfactant adsorption.
△ Less
Submitted 23 May, 2007;
originally announced May 2007.
-
Structure of interacting aggregates of silica nanoparticles in a polymer matrix: Small-angle scattering and Reverse Monte-Carlo simulations
Authors:
Julian Oberdisse,
Peter Hine,
Wim Pyckhout-Hintzen
Abstract:
Reinforcement of elastomers by colloidal nanoparticles is an important application where microstructure needs to be understood - and if possible controlled - if one wishes to tune macroscopic mechanical properties. Here the three-dimensional structure of big aggregates of nanometric silica particles embedded in a soft polymeric matrix is determined by Small Angle Neutron Scattering. Experimental…
▽ More
Reinforcement of elastomers by colloidal nanoparticles is an important application where microstructure needs to be understood - and if possible controlled - if one wishes to tune macroscopic mechanical properties. Here the three-dimensional structure of big aggregates of nanometric silica particles embedded in a soft polymeric matrix is determined by Small Angle Neutron Scattering. Experimentally, the crowded environment leading to strong reinforcement induces a strong interaction between aggregates, which generates a prominent interaction peak in the scattering. We propose to analyze the total signal by means of a decomposition in a classical colloidal structure factor describing aggregate interaction and an aggregate form factor determined by a Reverse Monte Carlo technique. The result gives new insights in the shape of aggregates and their complex interaction in elastomers. For comparison, fractal models for aggregate scattering are also discussed.
△ Less
Submitted 22 May, 2007;
originally announced May 2007.
-
Collective rearrangement at the onset of flow of a polycrystalline hexagonal columnar phase
Authors:
Teresa Bauer,
Julian Oberdisse,
Laurence Ramos
Abstract:
Creep experiments on polycrystalline surfactant hexagonal columnar phases show a power law regime, followed by a drastic fluidization before reaching a final stationary flow. The scaling of the fluidization time with the shear modulus of the sample and stress applied suggests that the onset of flow involves a bulk reorganization of the material. This is confirmed by X-ray scattering under stress…
▽ More
Creep experiments on polycrystalline surfactant hexagonal columnar phases show a power law regime, followed by a drastic fluidization before reaching a final stationary flow. The scaling of the fluidization time with the shear modulus of the sample and stress applied suggests that the onset of flow involves a bulk reorganization of the material. This is confirmed by X-ray scattering under stress coupled to \textit{in situ} rheology experiments, which show a collective reorientation of all crystallites at the onset of flow. The analogy with the fracture of heterogeneous materials is discussed.
△ Less
Submitted 19 December, 2006;
originally announced December 2006.
-
Soluble Hydrogen-bonding Interpolymer Complexes in Water: A Small-Angle Neutron Scattering Study
Authors:
Maria Sotiropoulou,
Julian Oberdisse,
Georgios Staikos
Abstract:
The hydrogen-bonding interpolymer complexation between poly(acrylic acid) (PAA) and the poly(N,N-dimethylacrylamide) (PDMAM) side chains of the negatively charged graft copolymer poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid)-graft-poly(N, N dimethylacrylamide) (P(AA-co-AMPSA)-g-PDMAM), containing 48 wt % of PDMAM, and shortly designated as G48, has been studied by small-ang…
▽ More
The hydrogen-bonding interpolymer complexation between poly(acrylic acid) (PAA) and the poly(N,N-dimethylacrylamide) (PDMAM) side chains of the negatively charged graft copolymer poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid)-graft-poly(N, N dimethylacrylamide) (P(AA-co-AMPSA)-g-PDMAM), containing 48 wt % of PDMAM, and shortly designated as G48, has been studied by small-angle neutron scattering in aqueous solution. Complexation occurs at low pH (pH < 3.75), resulting in the formation of negatively charged colloidal particles, consisting of PAA/PDMAM hydrogen-bonding interpolymer complexes, whose radius is estimated to be around 165 A. As these particles involve more than five graft copolymer chains, they act as stickers between the anionic chains of the graft copolymer backbone. This can explain the characteristic thickening observed in past rheological measurements with these mixtures in the semidilute solution, with decreasing pH. We have also examined the influence of pH and PAA molecular weight on the formation of these nanoparticles.
△ Less
Submitted 3 April, 2006;
originally announced April 2006.
-
Mechanical Properties of End-crosslinked Entangled Polymer Networks using Sliplink Brownian Dynamics Simulations
Authors:
Julian Oberdisse,
Giovanni Ianniruberto,
Francesco Greco,
Guiseppe Marrucci
Abstract:
The mechanical properties of a polymeric network containing both crosslinks and sliplinks (entanglements) are studied using a multi-chain Brownian dynamics simulation. We coarse-grain at the level of chain segments connecting consecutive nodes (cross- or sliplinks), with particular attention to the Gaussian statistics of the network. Affine displacement of nodes is not imposed: their displacemen…
▽ More
The mechanical properties of a polymeric network containing both crosslinks and sliplinks (entanglements) are studied using a multi-chain Brownian dynamics simulation. We coarse-grain at the level of chain segments connecting consecutive nodes (cross- or sliplinks), with particular attention to the Gaussian statistics of the network. Affine displacement of nodes is not imposed: their displacement as well as sliding of monomers through sliplinks is governed by force balances. The simulation results of stress in uniaxial extension and the full stress tensor in simple shear including the (non-zero) second normal stress difference are presented for monodisperse chains with up to 18 entanglements between two crosslinks. The cases of two different force laws of the subchains (Gaussian chains and chains with finite extensibility) for two different numbers of monomers in a subchain (no = 50 and no = 100) are examined. It is shown that the additivity assumption of slip- and crosslink contribution holds for sufficiently long chains with two or more entanglements, and that it can be used to construct the strain response of a network of infinitely long chains. An important consequence is that the contribution of sliplinks to the small-strain shear modulus is about ⅔ of the contribution of a crosslink.
△ Less
Submitted 20 February, 2006;
originally announced February 2006.
-
Aggregation of colloidal nanoparticles in polymer matrices
Authors:
Julian Oberdisse
Abstract:
Some of our recent studies of the structure and mechanical properties of a special type of nanocomposite are reviewed here. In silica-latex systems, a latex film with silica inclusions is formed from a colloidal solution of both components. During drying of the solution, the formation of silica domains can be controlled via the physico-chemical properties of the solution. Well-defined silica agg…
▽ More
Some of our recent studies of the structure and mechanical properties of a special type of nanocomposite are reviewed here. In silica-latex systems, a latex film with silica inclusions is formed from a colloidal solution of both components. During drying of the solution, the formation of silica domains can be controlled via the physico-chemical properties of the solution. Well-defined silica aggregates embedded in a polymer matrix can be generated, and the mechanical properties of the resulting nanocomposite have been shown to be directly correlated to the average structure.
△ Less
Submitted 19 October, 2005;
originally announced October 2005.
-
Structure of Polypeptide Based Diblock Copolymers in Solution: Stimuli-responsive Vesicles and Micelles
Authors:
Frédéric Chécot,
Annie Brûlet,
Julian Oberdisse,
Yves Gnanou,
Olivier Mondain-Monval,
Sébastien Lecommandoux
Abstract:
Polypeptide-based diblock copolymers forming either well-defined self-assembled micelles or vesicles after direct dissolution in water or in dichloromethane, have been studied combining light and neutron scattering with electron microscopy experiments. The size of these structures could be reversibly manipulated as a function of environmental changes such as pH and ionic strength in water. Compa…
▽ More
Polypeptide-based diblock copolymers forming either well-defined self-assembled micelles or vesicles after direct dissolution in water or in dichloromethane, have been studied combining light and neutron scattering with electron microscopy experiments. The size of these structures could be reversibly manipulated as a function of environmental changes such as pH and ionic strength in water. Compared to other pH-responsive seld-assembled systems based on "classical" polyelectrolytes, these polypeptide-based nanostructures present the ability to give a response in highly salted media as the chain conformational ordering can be controlled. This makes these micelles and vesicles suitable for biological applications: they provide significant advantages in the control of the structure and function of supramolecular self-assemblies.
△ Less
Submitted 3 March, 2005;
originally announced March 2005.
-
Electrostatic Self-assembly : A New Route Towards Nanostructures
Authors:
J. -F. Berret,
P. Herve,
M. Morvan,
K. Yokota,
M. Destarac,
J. Oberdisse,
I. Grillo,
R. Schweins
Abstract:
During the last 3 years, our group has investigated extensively the complexation mechanism between neutral-polyelectrolyte block copolymers with oppositely charged species. These species are surfactant micelles, multivalent counterions and inorganic nanoparticles. In the three cases, we have established the thermodynamical phase diagram of these systems, and found broad regions where supramolecu…
▽ More
During the last 3 years, our group has investigated extensively the complexation mechanism between neutral-polyelectrolyte block copolymers with oppositely charged species. These species are surfactant micelles, multivalent counterions and inorganic nanoparticles. In the three cases, we have established the thermodynamical phase diagram of these systems, and found broad regions where supramolecular aggregates spontaneously form via electrostatic self-assembly. From earlier works, it was suspected that these mixed colloids exhibit a core-shell structure. However, their inner structure was unveiled by us only recently, using a combination of light, neutron and x-ray scattering experiments.
△ Less
Submitted 5 January, 2005;
originally announced January 2005.
-
Structure and rheological properties of soft-hard nanocomposites: Influence of aggregation and interfacial modification
Authors:
Julian Oberdisse,
Abdeslam El Harrak,
Geraldine Carrot,
Jacques Jestin,
Francois Boue
Abstract:
A study of the reinforcement effect of a soft polymer matrix by hard nanometric filler particles is presented. In the main part of this article, the structure of the silica filler in the matrix is studied by Small Angle Neutron Scattering (SANS), and stress-strain isotherms are measured to characterize the rheological properties of the composites. Our analysis allows us to quantify the degree of…
▽ More
A study of the reinforcement effect of a soft polymer matrix by hard nanometric filler particles is presented. In the main part of this article, the structure of the silica filler in the matrix is studied by Small Angle Neutron Scattering (SANS), and stress-strain isotherms are measured to characterize the rheological properties of the composites. Our analysis allows us to quantify the degree of aggregation of the silica in the matrix, which is studied as a function of pH (4-10), silica volume fraction (3-15%) and silica bead size (average radius 78 A and 96 A). Rheological properties of the samples are represented in terms of the strain-dependent reinforcement factor, which highlights the contribution of the filler. Combining the structural information with a quantitative analysis of the reinforcement factor, the aggregate size and compacity (10%-40%) as a function of volume fraction and pH can be deduced. In a second, more explorative study, the grafting of polymer chains on nanosilica beads for future reinforcement applications is followed by SANS. The structure of the silica and the polymer are measured separately by contrast variation, using deuterated material. The aggregation of the silica beads in solution is found to decrease during polymerization, reaching a rather low final aggregation number (less than ten).
△ Less
Submitted 17 December, 2004;
originally announced December 2004.
-
Stabilization and Controlled Association of Inorganic Nanoparticles using Block Copolymers
Authors:
K. Yokota,
M. Morvan,
J. -F. Berret,
J. Oberdisse
Abstract:
We report on the structural properties of mixed aggregates made from rare-earth inorganic nanoparticles (radius 20 Angstroms) and polyelectrolyte-neutral block copolymers in aqueous solutions. Using scattering experiments and Monte Carlo simulations, we show that these mixed aggregates have a hierarchical core-shell microstructure. The core is made of densely packed nanoparticles and it is surro…
▽ More
We report on the structural properties of mixed aggregates made from rare-earth inorganic nanoparticles (radius 20 Angstroms) and polyelectrolyte-neutral block copolymers in aqueous solutions. Using scattering experiments and Monte Carlo simulations, we show that these mixed aggregates have a hierarchical core-shell microstructure. The core is made of densely packed nanoparticles and it is surrounded by a corona of neutral chains. This microstructure results from a process of controlled association and confers to the hybrid aggregates a remarkable colloidal stability.
△ Less
Submitted 26 November, 2004;
originally announced November 2004.