-
Spray Formation during the Impact of a Flat Plate on a Water Surface
Authors:
An Wang,
Shizhao Wang,
Elias Balaras,
Devin Conroy,
Thomas T. O'Shea,
James H. Duncan
Abstract:
In naval hydrodynamics most the reseach on the impact of the hull of a vesel to the water surface has focused primarily on map** the forces on the hull and much less to the formation of the spray. The latter is the topic of the present work, where the spray generated by the impact of a flat plate on a quiescent water surface is studied by experiments and simulations at different impact Froude nu…
▽ More
In naval hydrodynamics most the reseach on the impact of the hull of a vesel to the water surface has focused primarily on map** the forces on the hull and much less to the formation of the spray. The latter is the topic of the present work, where the spray generated by the impact of a flat plate on a quiescent water surface is studied by experiments and simulations at different impact Froude numbers. Overall two types of sprays are formed: Type I, which is a cloud of droplets and ligaments generated at the impact of the plate's leading edge with the water surface, and Type II, which is formed after the trailing edge of the plate enters the local water surface. Detailed analysis of the experimental data for the Type II spray revealed that the spray envelopes and root point trajectories are independent of Froude number close to the trailing edge, while further away reach higher vertical positions for larger Froude numbers. The numerical simulation captures the general behavior of the Type II spray and agrees favorably with the experimental results. A series of computations with a flexible plate is also reported, where it is shown that increased flexibility reduces the height of the spray and suppresses the formation of droplets.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
A Numerical Formulation for Simulating Free-Surface Hydrodynamics
Authors:
Thomas T. O'Shea,
Kyle A. Brucker,
Douglas G. Dommermuth,
Donald C. Wyatt
Abstract:
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the break…
▽ More
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the breaking of waves. The numerical scheme is implemented on a parallel computer. Recent improvements to the numerical scheme are discussed, including implementation of a new multigrid procedure and conversion to MPI communication. Numerical predictions are compared to laboratory measurements of a towed transom-stern model.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Numerical Simulation of Wakes in a Weakly Stratified Fluid
Authors:
James W. Rottman,
Douglas G. Dommermuth,
George E. Innis,
Thomas T. O'Shea,
Evgeny Novikov
Abstract:
This paper describes some preliminary numerical studies using large eddy simulation of full-scale submarine wakes. Submarine wakes are a combination of the wake generated by a smooth slender body and a number of superimposed vortex pairs generated by various control surfaces and other body appendages. For this preliminary study, we attempt to gain some insight into the behavior of full-scale subma…
▽ More
This paper describes some preliminary numerical studies using large eddy simulation of full-scale submarine wakes. Submarine wakes are a combination of the wake generated by a smooth slender body and a number of superimposed vortex pairs generated by various control surfaces and other body appendages. For this preliminary study, we attempt to gain some insight into the behavior of full-scale submarine wakes by computing separately the evolution the self-propelled wake of a slender body and the motion of a single vortex pair in both a non-stratified and a stratified environment. An important aspect of the simulations is the use of an iterative procedure to relax the initial turbulence field so that turbulent production and dissipation are in balance.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
The Numerical Simulation of Ship Waves Using Cartesian Grid Methods with Adaptive Mesh Refinement
Authors:
Douglas G. Dommermuth,
Mark Sussman,
Robert F. Beck,
Thomas T. O'Shea,
Donald C. Wyatt,
Kevin Olson,
Peter MacNeice
Abstract:
Cartesian-grid methods with Adaptive Mesh Refinement (AMR) are ideally suited for simulating the breaking of waves, the formation of spray, and the entrainment of air around ships. As a result of the cartesian-grid formulation, minimal input is required to describe the ships geometry. A surface panelization of the ship hull is used as input to automatically generate a three-dimensional model. No t…
▽ More
Cartesian-grid methods with Adaptive Mesh Refinement (AMR) are ideally suited for simulating the breaking of waves, the formation of spray, and the entrainment of air around ships. As a result of the cartesian-grid formulation, minimal input is required to describe the ships geometry. A surface panelization of the ship hull is used as input to automatically generate a three-dimensional model. No three-dimensional gridding is required. The AMR portion of the numerical algorithm automatically clusters grid points near the ship in regions where wave breaking, spray formation, and air entrainment occur. Away from the ship, where the flow is less turbulent, the mesh is coarser. The numerical computations are implemented using parallel algorithms. Together, the ease of input and usage, the ability to resolve complex free-surface phenomena, and the speed of the numerical algorithms provide a robust capability for simulating the free-surface disturbances near a ship. Here, numerical predictions, with and without AMR, are compared to experimental measurements of ships moving with constant forward speed, including a vertical strut, the DDG 5415, and a wedge-like geometry.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
The Numerical Simulation of Ship Waves Using Cartesian-Grid and Volume-of-Fluid Methods
Authors:
Douglas G. Dommermuth,
Thomas T. O'Shea,
Donald C. Wyatt,
Mark Sussman,
Gabriel D. Weymouth,
Dick K. P. Yue,
Paul Adams,
Randall Hand
Abstract:
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the break…
▽ More
Cartesian-grid methods in combination with immersed-body and volume-of-fluid methods are ideally suited for simulating breaking waves around ships. A surface panelization of the ship hull is used as input to impose body-boundary conditions on a three-dimensional cartesian grid. The volume-of-fluid portion of the numerical algorithm is used to capture the free-surface interface, including the breaking of waves. The numerical scheme is implemented on a parallel computer. Various numerical issues are discussed, including implementing exit boundary conditions, conserving mass using a novel regridding algorithm, improving resolution through the use of stretched grids, minimizing initial transients, and enforcing hull boundary conditions on cartesian grids. Numerical predictions are compared to experimental measurements of ship models moving with forward speed, including model 5415 and model 5365 (Athena). The ability to model forced-motions is illustrated using a heaving sphere moving with forward speed.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
An Integrated Experimental and Computational Investigation into the Dynamic Loads and Free-surface Wave-Field Perturbations Induced by Head-Sea Regular Waves on a 1/8.25 Scale-Model of the R/V ATHENA
Authors:
Toby Ratcliffe,
Lisa Minnick,
Thomas T. O'Shea,
Thomas Fu,
Lauren Russell,
Douglas G. Dommermuth
Abstract:
A 1/8.25 scale-model of the U.S. Navy Research Vessel ATHENA was tested in regular head-sea waves to obtain data for validation of computational fluid dynamics (CFD) predictive tools. The experiments were performed in the David Taylor Model Basin at the Naval Surface Warfare Center (NSWC). With the model towed fixed in head-seas, horizontal and vertical loads on the model were obtained at two Frou…
▽ More
A 1/8.25 scale-model of the U.S. Navy Research Vessel ATHENA was tested in regular head-sea waves to obtain data for validation of computational fluid dynamics (CFD) predictive tools. The experiments were performed in the David Taylor Model Basin at the Naval Surface Warfare Center (NSWC). With the model towed fixed in head-seas, horizontal and vertical loads on the model were obtained at two Froude numbers, $F_r=0.25$ and $F_r=0.43$. The model was run at two conditions of head-sea wavelengths corresponding to $λ=2L_o$ and $λ=1/2L_o$ with $H/λ=0.03$, where $L_o$ is the length of the model and $H=2 a$ is the wave height. The wave field perturbations induced by the head-sea waves were quantified from free-surface images generated by a laser light sheet. Predictions of the horizontal and vertical loads on the model in regular head sea waves were made with the Numerical Flow Analysis (NFA) code. Numerical predictions of the wave-field perturbations were compared with the experimental data and the correlation coefficients have been computed.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Detailed Assessment of Numerical Flow Analysis (NFA) to Predict the Hydrodynamics of a Deep-V Planing Hull
Authors:
Thomas C. Fu,
Thomas T. O'Shea,
Carolyn Q. Judge,
Douglas G. Dommermuth,
Kyle A. Brucker,
Donald C. Wyatt
Abstract:
Over the past few years much progress has been made in Computational Fluid Dynamics (CFD) in its ability to accurately simulate the hydrodynamics associated with a deep-V monohull planing craft. This work has focused on not only predicting the hydrodynamic forces and moments, but also the complex multiphase free-surface flow field generated by a deep-V monohull planing boat at high Froude numbers.…
▽ More
Over the past few years much progress has been made in Computational Fluid Dynamics (CFD) in its ability to accurately simulate the hydrodynamics associated with a deep-V monohull planing craft. This work has focused on not only predicting the hydrodynamic forces and moments, but also the complex multiphase free-surface flow field generated by a deep-V monohull planing boat at high Froude numbers. One of these state of the art CFD codes is Numerical Flow Analysis (NFA). NFA provides turnkey capabilities to model breaking waves around a ship, including both plunging and spilling breaking waves, the formation of spray, and the entrainment of air. NFA uses a Cartesian-grid formulation with immersed body and volume-of-fluid methods.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
The Impact of a Deep-Water Plunging Breaker
Authors:
Christine Ikeda,
Thomas T. O'Shea,
Kyle A. Brucker,
David A. Drazen,
Douglas G. Dommermuth,
Thomas Fu,
Anne M. Fullerton,
James H. Duncan
Abstract:
The impact of a plunging breaking wave (wavelength approximately 1.3m) on a rigidly mounted rigid cube structure (dimension 0.31m) that is partially submerged is explored through experiments and numerical calculations. The experiments are carried out in a wave tank and the breaker is generated with a mechanical wave maker using a dispersive focusing technique. The water-surface profile upstream of…
▽ More
The impact of a plunging breaking wave (wavelength approximately 1.3m) on a rigidly mounted rigid cube structure (dimension 0.31m) that is partially submerged is explored through experiments and numerical calculations. The experiments are carried out in a wave tank and the breaker is generated with a mechanical wave maker using a dispersive focusing technique. The water-surface profile upstream of the front face of the cube and in its vertical centerplane is measured using a cinematic laser-induced fluorescence technique. The three-dimensional flow in the wave tank is simulated directly using the Numerical Flow Analysis (NFA) code. The experiments and the calculations are used to explore the details of the wave-impact process and, in particular, the formation of the high-speed vertical jet that is found on the front face of the cube under some impact conditions.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Model-Scale Experimental Measurements and Computational Predictions for a Large Transom-Stern Wave
Authors:
David A. Drazen,
Anne M. Fullerton,
Thomas C. Fu,
Kristine L. C. Beale,
Thomas T. O'Shea,
Kyle A. Brucker,
Douglas G. Dommermuth,
Donald C. Wyatt,
Shanti Bhushan,
Pablo M. Carrica,
Fred Stern
Abstract:
The flow field generated by a transom stern hull form is a complex, broad-banded, three-dimensional system marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. Recent model-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned hull form, Model 5673,…
▽ More
The flow field generated by a transom stern hull form is a complex, broad-banded, three-dimensional system marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. Recent model-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned hull form, Model 5673, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured by Light Detection And Ranging (LiDAR) and Quantitative Visualization (QViz) sensors over a range of model speeds covering both wet- and dry-transom operating conditions. Numerical predictions for this data set from two Office of Naval Research (ONR) supported naval-design codes, Numerical Flow Analysis (NFA) and CFDship-Iowa-V.4, have been performed. Comparisons of experimental data, including LiDAR and QViz measurements, to the numerical predictions for wet-transom and dry transom conditions are presented and demonstrate the current state of the art in the simulation of ship generated breaking waves. This work is part of an ongoing collaborative effort as part of the ONR Ship Wave Breaking and Bubble Wake program, to assess, validate, and improve the capability of Computational Fluid Dynamics (CFD).
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Experimental Measurements and Computational Predictions of a Deep-V Planing Hull
Authors:
Thomas C. Fu,
Toby Ratcliffe,
Thomas T. O'Shea,
Kyle A. Brucker,
R. Scott Graham,
Donald C. Wyatt
Abstract:
In order to support development of computational fluid dynamics codes for high-speed, small-craft applications, laboratory experiments were performed on a representative of Deep-V planing craft model. The measurements included resistance, sinkage and trim, hull pressure measurements, longitudinal wavecuts, and bow-wave and stern-wake topologies. The model was towed in calm water over a speed range…
▽ More
In order to support development of computational fluid dynamics codes for high-speed, small-craft applications, laboratory experiments were performed on a representative of Deep-V planing craft model. The measurements included resistance, sinkage and trim, hull pressure measurements, longitudinal wavecuts, and bow-wave and stern-wake topologies. The model was towed in calm water over a speed range of 1.78 to 14.2 m/s (5.8 to 46.6 ft/s) corresponding to a Froude number range of 0.31 to 2.5. At planing speeds, +8 m/s (+26.2 ft/s), the model was run with the addition of trim tabs set at two different angles, 7 and 13 degrees. Photographic documentation, including still photographs and video, was recorded during the collection of all the data. Numerical simulation of the flow field was performed utilizing the Numerical Flow Analysis (NFA) code and compared to the model test results.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Measured and Predicted Wave-Impact Pressures from Breaking and Non-breaking Waves
Authors:
Anne M. Fullerton,
Thomas C. Fu,
Susan Brewton,
Kyle A. Brucker,
Thomas T. O'Shea,
Douglas G. Dommermuth
Abstract:
Impact loads from waves on vessels and coastal structures are complex and may involve wave breaking, which has made these loads difficult to estimate numerically or empirically. Results from previous experiments have shown a wide range of forces and pressures measured from breaking and nonbreaking waves, with no clear trend between wave characteristics and the localized forces and pressures that t…
▽ More
Impact loads from waves on vessels and coastal structures are complex and may involve wave breaking, which has made these loads difficult to estimate numerically or empirically. Results from previous experiments have shown a wide range of forces and pressures measured from breaking and nonbreaking waves, with no clear trend between wave characteristics and the localized forces and pressures that they generate. In 2008, a canonical breaking wave impact data set was obtained at the Naval Surface Warfare Center, Carderock Division, by measuring the distribution of impact pressures of incident nonbreaking and breaking waves on one face of a cube. This experimental effort was sponsored by the Office of Naval Research (ONR), under the Dynamics of Interacting Platforms Program, Program Manager Dr. Ron Joslin. The effects of wave height, wavelength, face orientation, face angle, and submergence depth were investigated. Additionally, a limited number of runs were made at low forward speeds, ranging from about 0.5 to 2 knots (0.26 to 1.03 m/s).
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
A Comparison of Full-Scale Experimental Measurements and Computational Predictions of the Transom-Stern Wave of the R/V Athena I
Authors:
Donald C. Wyatt,
Thomas C. Fu,
Genevieve L. Taylor,
Eric J. Terrill,
Tao Xing,
Shanti Bhushan,
Thomas T. O'Shea,
Douglas G. Dommermuth
Abstract:
Full-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned vessel, the R/V Athena I, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured in-situ by a LIDAR sensor over a range of ship speeds covering both wet- and dry-transom operating conditions. Numeric…
▽ More
Full-scale experimental measurements and numerical predictions of the wave-elevation topology behind a transom-sterned vessel, the R/V Athena I, are compared and assessed in this paper. The mean height, surface roughness (RMS), and spectra of the breaking stern-waves were measured in-situ by a LIDAR sensor over a range of ship speeds covering both wet- and dry-transom operating conditions. Numerical predictions for this data set from two Office of Naval Research (ONR) supported naval-design codes, NFA and CFDship-Iowa-V.4, have been performed. Initial comparisons of the LIDAR data to the numerical predictions at 5.4 m/s (10.5 kts), a wet-transom condition, are presented. This work represents an ongoing effort on behalf of the ONR Ship Wave Breaking and Bubble Wake program, to assess, validate, and improve the capability of Computational Fluid Dynamics (CFD) to predict full-scale ship-generated wave fields.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Numerical Prediction of a Seaway
Authors:
Douglas G. Dommermuth,
Thomas C. Fu,
Kyle A. Brucker,
Thomas T. O'Shea,
Donald C. Wyatt
Abstract:
The ability of three wave theories to predict statistics and the crest kinematics of a seaway is quantified. The three wave theories are high-order spectral (HOS) theory, free-surface map** (FSM), and volume-of-fluid (VOF). Issues associated with applying these methods are discussed, including free-surface adjustment, smoothing and filtering, and forcing. Two long-crested regular waves with vary…
▽ More
The ability of three wave theories to predict statistics and the crest kinematics of a seaway is quantified. The three wave theories are high-order spectral (HOS) theory, free-surface map** (FSM), and volume-of-fluid (VOF). Issues associated with applying these methods are discussed, including free-surface adjustment, smoothing and filtering, and forcing. Two long-crested regular waves with varying bandwidth and moderate steepness are used to benchmark the performance of the wave theories. As a more stringent test, a broad-banded long-crested seaway is simulated.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Three-Dimensional Simulations of Deep-Water Breaking Waves
Authors:
Kyle A. Brucker,
Thomas T. O'Shea,
Douglas G. Dommermuth,
Paul Adams
Abstract:
The formulation of a canonical deep-water breaking wave problem is introduced, and the results of a set of three-dimensional numerical simulations for deep-water breaking waves are presented. In this paper fully nonlinear progressive waves are generated by applying a normal stress to the free surface. Precise control of the forcing allows for a systematic study of four types of deep-water breaking…
▽ More
The formulation of a canonical deep-water breaking wave problem is introduced, and the results of a set of three-dimensional numerical simulations for deep-water breaking waves are presented. In this paper fully nonlinear progressive waves are generated by applying a normal stress to the free surface. Precise control of the forcing allows for a systematic study of four types of deep-water breaking waves, characterized herein as weak plunging, plunging, strong plunging, and very strong plunging.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Numerical simulation of transom-stern waves
Authors:
Randall E. Hand,
Miguel Valenciano,
Kevin George,
Tom Biddlecome,
Richard Walters,
Mike Stephens,
Thomas T. O'Shea,
Kyle A. Brucker,
Douglas G. Dommermuth
Abstract:
The flow field generated by a transom-stern hullform is a complex, broad-banded, three-dimensional phenomenon marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. The results of a set of numerical simulations, which use the Numerical Flow Analysis (NFA) code, of the flow around the Model 5673 transom stern a…
▽ More
The flow field generated by a transom-stern hullform is a complex, broad-banded, three-dimensional phenomenon marked by a large breaking wave. This unsteady multiphase turbulent flow feature is difficult to study experimentally and simulate numerically. The results of a set of numerical simulations, which use the Numerical Flow Analysis (NFA) code, of the flow around the Model 5673 transom stern at speeds covering both wet- and dry-transom operating conditions are shown in the accompanying fluid dynamics video. The numerical predictions for wet-transom and dry-transom conditions are presented to demonstrate the current state of the art in the simulation of ship generated breaking waves. The interested reader is referred to Drazen et al. (2010) for a detailed and comprehensive comparison with experiments conducted at the Naval Surface Warfare Center Carderock Division (NSWCCD).
△ Less
Submitted 19 October, 2010;
originally announced October 2010.