-
Analysis of the flow of granular materials through a screw conveyor
Authors:
Aashish Kumar Gupta,
Prabhu R. Nott
Abstract:
Screw conveyors are widely employed in industry for the bulk transport of particulate materials. Several studies have attempted to correlate the discharge rate with the rotation speed of the screw via experiments and particle dynamics simulations. However, a detailed mechanical model that would assist in the optimal design of screw conveyors has not been attempted. In this study, we first construc…
▽ More
Screw conveyors are widely employed in industry for the bulk transport of particulate materials. Several studies have attempted to correlate the discharge rate with the rotation speed of the screw via experiments and particle dynamics simulations. However, a detailed mechanical model that would assist in the optimal design of screw conveyors has not been attempted. In this study, we first construct a simple model that assumes the entire granular medium to move as a rigid body sliding along the surfaces of the screw and barrel. By enforcing the balances of linear and angular momentum to a suitably chosen continuum element, we show that under certain limiting conditions, the discharge rate for a given angular velocity and screw geometry can be obtained. Further, we show that the discharge can be maximized by setting the ratio of the pitch to barrel diameter to a particular value. We then study the detailed flow within the conveyor using the Discrete Element Method, which reveals that a significant fraction of the material exhibits solid body motion, in agreement with the simple model. We assess the effect of relaxing the limiting conditions employed in the model, thereby determining the connection between the friction at the walls and the kinematics of flow. Finally, the trend in variation of average axial velocity with the pitch to barrel diameter ratio in the presence of gravity is compared with that from our model and simulations in the absence of gravity. We observe that both the trends are qualitatively the same indicating that the dependence of average axial velocity on the geometry of the conveyor is not altered by the introduction of gravity.
△ Less
Submitted 26 November, 2021;
originally announced November 2021.
-
Coherent force chains in disordered granular materials emerge from a percolation of quasilinear clusters
Authors:
K. P. Krishnaraj,
Prabhu R Nott
Abstract:
Dense granular materials and other particle aggregates transmit stress in a manner that belies their microstructural disorder. A subset of the particle contact network is strikingly coherent, wherein contacts are aligned nearly linearly and transmit large forces. Important material properties are associated with these force chains, but their origin has remained a puzzle. We classify subnetworks by…
▽ More
Dense granular materials and other particle aggregates transmit stress in a manner that belies their microstructural disorder. A subset of the particle contact network is strikingly coherent, wherein contacts are aligned nearly linearly and transmit large forces. Important material properties are associated with these force chains, but their origin has remained a puzzle. We classify subnetworks by their linear connectivity, and show the emergence of a percolation transition at a critical linearity at which the network is sparse, coherent, and contains the force chains. The subnetwork at critical linearity closely reflects the macroscopic stress and explains distinctive features of granular mechanics.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
The collective dynamics of self-propelled particles
Authors:
Vishwajeet Mehandia,
Prabhu R. Nott
Abstract:
We have proposed a method for the dynamic simulation of a collection of self-propelled particles in a viscous Newtonian fluid. We restrict attention to particles whose size and velocity are small enough that the fluid motion is in the cree** flow regime. We have proposed a simple model for a self-propelled particle, and extended the Stokesian Dynamics method to conduct dynamic simulations of a…
▽ More
We have proposed a method for the dynamic simulation of a collection of self-propelled particles in a viscous Newtonian fluid. We restrict attention to particles whose size and velocity are small enough that the fluid motion is in the cree** flow regime. We have proposed a simple model for a self-propelled particle, and extended the Stokesian Dynamics method to conduct dynamic simulations of a collection of such particles. In our description, each particle is treated as a sphere with an orientation vector $\te{p}$, whose locomotion is driven by the action of a force dipole at a point slightly displaced from its centre. In isolation, a self-propelled particle moves at a constant speed in the direction of $\te{p}$. When it coexists with many such particles, its hydrodynamic interaction with the other particles alters its velocity and, more importantly, its orientation. As a result, the motion of the particle is chaotic. Our simulations are not restricted to low particle concentration, as we implement the full hydrodynamic interactions between the particles, but we restrict the motion of particles to two dimensions to reduce computation. We report the statistical properties of a suspension of self-propelled particles, such as the distribution of particle velocity, the pair correlation function and the orientation correlation function, for a range of the particle concentration.
△ Less
Submitted 10 July, 2007;
originally announced July 2007.
-
The statistics of particle velocities in dense granular flows
Authors:
Sudheshna Moka,
Prabhu R. Nott
Abstract:
We present measurements of the particle velocity distribution in the flow of granular material through vertical channels. Our study is confined to dense, slow flows where the material shears like a fluid only in thin layers adjacent to the walls, while a large core moves without continuous deformation, like a solid. We find the velocity distribution to be non-Gaussian, anisotropic, and to follow…
▽ More
We present measurements of the particle velocity distribution in the flow of granular material through vertical channels. Our study is confined to dense, slow flows where the material shears like a fluid only in thin layers adjacent to the walls, while a large core moves without continuous deformation, like a solid. We find the velocity distribution to be non-Gaussian, anisotropic, and to follow a power law at large velocities. Remarkably, the distribution is identical in the fluid-like and solid-like regions. The velocity variance is maximum at the core, defying predictions of hydrodynamic theories. We show evidence of spatially correlated motion, and propose a mechanism for the generation of fluctuational motion in the absence of shear.
△ Less
Submitted 18 December, 2004;
originally announced December 2004.
-
The segregation instability of a sheared suspension film
Authors:
Rama Govindarajan,
Prabhu R. Nott,
Sriram Ramaswamy
Abstract:
Starting from the equations of Stokes flow and the mass conservation of particles as determined by shear-induced diffusion, we derive the coupled equations for the dynamics of particle concentration and film thickness for the free-surface flow of a fluid film pulled up by a tilted wall rising from a pool of neutrally buoyant, non-Brownian suspension. We find an instability of the film with respe…
▽ More
Starting from the equations of Stokes flow and the mass conservation of particles as determined by shear-induced diffusion, we derive the coupled equations for the dynamics of particle concentration and film thickness for the free-surface flow of a fluid film pulled up by a tilted wall rising from a pool of neutrally buoyant, non-Brownian suspension. We find an instability of the film with respect to axial undulations of film thickness and modulations of particle concentration, and the instability growth-rate increases as a certain combination of the two dimensionless shear induced diffusivities (which determine the particle flux driven by concentration and shear rate gradients) falls below a critical value. This reinforces the conclusions of {\it Phys. Fluids} {\bf 13} (12), p. 3517 (2001), suggesting an explanation of the experiments of Tirumkudulu {\it et al.}, Phys. Fluids {\bf 11}, 507-509 (1999); {\it ibid.} {\bf 12}, 1615 (2000). In addition, we predict a ``pile-up'' instability in which perturbations that vary in the direction of the wall velocity are amplified; this instability is not driven by shear-induced migration, but is a result of the dependence of the suspension viscosity on the particle concentration.
△ Less
Submitted 8 December, 2003;
originally announced December 2003.
-
Theory of Suspension Segregation in Partially Filled Horizontal Rotating Cylinders
Authors:
Rama Govindarajan,
Prabhu R. Nott,
Sriram Ramaswamy
Abstract:
It is shown that a suspension of particles in a partially-filled, horizontal, rotating cylinder is linearly unstable towards axial segregation and an undulation of the free surface at large enough particle concentrations. Relying on the shear-induced diffusion of particles, concentration-dependent viscosity, and the existence of a free surface, our theory provides an explanation of the experimen…
▽ More
It is shown that a suspension of particles in a partially-filled, horizontal, rotating cylinder is linearly unstable towards axial segregation and an undulation of the free surface at large enough particle concentrations. Relying on the shear-induced diffusion of particles, concentration-dependent viscosity, and the existence of a free surface, our theory provides an explanation of the experiments of Tirumkudulu et al., Phys. Fluids 11, 507-509 (1999); ibid. 12, 1615 (2000).
△ Less
Submitted 24 September, 2001;
originally announced September 2001.
-
A frictional Cosserat model for the slow shearing of granular materials
Authors:
L. S. Mohan,
K. Kesava Rao,
Prabhu R. Nott
Abstract:
A rigid-plastic Cosserat model for slow frictional flow of granular materials, proposed by us in an earlier paper, has been used to analyze plane and cylindrical Couette flow. In this model, the hydrodynamic fields of a classical continuum are supplemented by the couple stress and the intrinsic angular velocity fields. The balance of angular momentum, which is satisfied implicitly in a classical…
▽ More
A rigid-plastic Cosserat model for slow frictional flow of granular materials, proposed by us in an earlier paper, has been used to analyze plane and cylindrical Couette flow. In this model, the hydrodynamic fields of a classical continuum are supplemented by the couple stress and the intrinsic angular velocity fields. The balance of angular momentum, which is satisfied implicitly in a classical continuum, must be enforced in a Cosserat continuum. As a result, the stress tensor could be asymmetric, and the angular velocity of a material point may differ from half the local vorticity. An important consequence of treating the granular medium as a Cosserat continuum is that it incorporates a material length scale in the model, which is absent in frictional models based on a classical continuum. Further, the Cosserat model allows determination of the velocity fields uniquely in viscometric flows, in contrast to classical frictional models. Experiments on viscometric flows of dense, slowly deforming granular materials indicate that shear is confined to a narrow region, usually a few grain diameters thick, while the remaining material is largely undeformed. This feature is captured by the present model, and the velocity profile predicted for cylindrical Couette flow is in good agreement with reported data. When the walls of the Couette cell are smoother than the granular material, the model predicts that the shear layer thickness is independent of the Couette gap $H$ when the latter is large compared to the grain diameter $d_p$. When the walls are of the same roughness as the granular material, the model predicts that the shear layer thickness varies as $(H/d_p)^{1/3}$ in the limit $(H/d_p) \gg 1$, for plane shear under gravity and cylindrical Couette flow.
△ Less
Submitted 27 July, 2001;
originally announced July 2001.
-
Analysis of radial segregation of granular mixtures in a rotating drum
Authors:
Saikat Chakraborty,
Prabhu R. Nott,
J. Ravi Prakash
Abstract:
This paper considers the segregation of a granular mixture in a rotating drum. Extending a recent kinematic model for grain transport on sandpile surfaces to the case of rotating drums, an analysis is presented for radial segregation in the rolling regime, where a thin layer is avalanching down while the rest of the material follows rigid body rotation. We argue that segregation is driven not ju…
▽ More
This paper considers the segregation of a granular mixture in a rotating drum. Extending a recent kinematic model for grain transport on sandpile surfaces to the case of rotating drums, an analysis is presented for radial segregation in the rolling regime, where a thin layer is avalanching down while the rest of the material follows rigid body rotation. We argue that segregation is driven not just by differences in the angle of repose of the species, as has been assumed in earlier investigations, but also by differences in the size and surface properties of the grains. The cases of grains differing only in size (slightly or widely) and only in surface properties are considered, and the predictions are in qualitative agreement with observations. The model yields results inconsistent with the assumptions for more general cases, and we speculate on how this may be corrected.
△ Less
Submitted 9 June, 1999;
originally announced June 1999.
-
Structure and Rheology of the Defect-gel States of Pure and Particle-dispersed Lyotropic Lamellar Phases
Authors:
Geetha Basappa,
Suneel,
V. Kumaran,
Prabhu R. Nott,
Sriram Ramaswamy,
V. M. Naik,
Deeleep Rout
Abstract:
We present important new results from light-microscopy and rheometry on a moderately concentrated lyotropic smectic, with and without particulate additives. Shear-treatment aligns the phase rapidly, except for a striking network of oily-streak defects, which anneals out much more slowly. If spherical particles several microns in diameter are dispersed in the lamellar medium, part of the defect n…
▽ More
We present important new results from light-microscopy and rheometry on a moderately concentrated lyotropic smectic, with and without particulate additives. Shear-treatment aligns the phase rapidly, except for a striking network of oily-streak defects, which anneals out much more slowly. If spherical particles several microns in diameter are dispersed in the lamellar medium, part of the defect network persists under shear-treatment, its nodes anchored on the particles. The sample as prepared has substantial storage and loss moduli, both of which decrease steadily under shear-treatment. Adding particles enhances the moduli and retards their decay under shear. The data for the frequency-dependent storage modulus after various durations of shear-treatment can be scaled to collapse onto a single curve. The elasticity and dissipation in these samples thus arises mainly from the defect network, not directly from the smectic elasticity and hydrodynamics.
△ Less
Submitted 14 July, 1999; v1 submitted 30 April, 1999;
originally announced April 1999.
-
A frictional Cosserat model for the flow of granular materials through a vertical channel
Authors:
L. Srinivasa Mohan,
Prabhu R. Nott,
K. Kesava Rao
Abstract:
A rigid-plastic Cosserat model has been used to study dense, fully developed flow of granular materials through a vertical channel. Frictional models based on the classical continuum do not predict the occurrence of shear layers, at variance with experimental observations. This feature has been attributed to the absence of a material length scale in their constitutive equations. The present mode…
▽ More
A rigid-plastic Cosserat model has been used to study dense, fully developed flow of granular materials through a vertical channel. Frictional models based on the classical continuum do not predict the occurrence of shear layers, at variance with experimental observations. This feature has been attributed to the absence of a material length scale in their constitutive equations. The present model incorporates such a material length scale by treating the granular material as a Cosserat continuum. Thus localised couple stresses exist and the stress tensor is asymmetric. The velocity profiles predicted by the model are in close agreement with available experimental data. The predicted dependence of the shear layer thickness on the width of the channel is in reasonable agreement with data. In the limit of the ratio of the particle diameter to the half-width of the channel being small, the model predicts that the shear layer thickness scaled by the particle diameter grows.
△ Less
Submitted 13 April, 1999;
originally announced April 1999.
