Showing 1–21 of 21 results for author: Norte, R A

Negative Temperature Pressure in Black Holes

Authors: Richard A. Norte

Abstract: The concept of negative temperature (T < 0) is unique to quantum physics and describes systems that are hotter than any positive temperature system. For decades negative temperatures have been shown in a number of spin systems, but experiments only recently demonstrated atomic ensembles with negative temperatures in their motional degrees of freedom. An observed behavior of such negative temperatu… ▽ More The concept of negative temperature (T < 0) is unique to quantum physics and describes systems that are hotter than any positive temperature system. For decades negative temperatures have been shown in a number of spin systems, but experiments only recently demonstrated atomic ensembles with negative temperatures in their motional degrees of freedom. An observed behavior of such negative temperature ensembles is that despite highly attractive forces between an arbitrary number of particles, there is a self-stabilization against collapse. Negative temperatures are only possible in quantum systems because there exists upper bounds on the energy of particles -- a property not found in classical physics. Here we consider whether event horizons set up similar upper limits within black holes, giving rise to negative temperature systems just within event horizons. Combining black hole thermodynamics with experimentally observed negative temperature effects could imply a quantum-based outward pressure in black holes. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Centimeter-scale nanomechanical resonators with low dissipation

Authors: Andrea Cupertino, Dongil Shin, Leo Guo, Peter G. Steeneken, Miguel A. Bessa, Richard A. Norte

Abstract: High-aspect-ratio mechanical resonators are pivotal in precision sensing, from macroscopic gravitational wave detectors to nanoscale acoustics. However, fabrication challenges and high computational costs have limited the length-to-thickness ratio of these devices, leaving a largely unexplored regime in nano-engineering. We present nanomechanical resonators that extend centimeters in length yet re… ▽ More High-aspect-ratio mechanical resonators are pivotal in precision sensing, from macroscopic gravitational wave detectors to nanoscale acoustics. However, fabrication challenges and high computational costs have limited the length-to-thickness ratio of these devices, leaving a largely unexplored regime in nano-engineering. We present nanomechanical resonators that extend centimeters in length yet retain nanometer thickness. We explore this expanded design space using an optimization approach which judiciously employs fast millimeter-scale simulations to steer the more computationally intensive centimeter-scale design optimization. By employing delicate nanofabrication techniques, our approach ensures high-yield realization, experimentally confirming room-temperature quality factors close to theoretical predictions. The synergy between nanofabrication, design optimization guided by machine learning, and precision engineering opens a solid-state path to room-temperature quality factors approaching 10 billion at kilohertz mechanical frequencies -- comparable to the performance of leading cryogenic resonators and levitated nanospheres, even under significantly less stringent temperature and vacuum conditions. △ Less

Submitted 14 June, 2024; v1 submitted 31 July, 2023; originally announced August 2023.

High-Strength Amorphous Silicon Carbide for Nanomechanics

Authors: Minxing Xu, Dongil Shin, Paolo M. Sberna, Roald van der Kolk, Andrea Cupertino, Miguel A. Bessa, Richard A. Norte

Abstract: For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high tensile stress, the performance of even the best strategy is limited by the tensile fracture strength of the resonator materials. In this study, a wafer-scale amo… ▽ More For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high tensile stress, the performance of even the best strategy is limited by the tensile fracture strength of the resonator materials. In this study, a wafer-scale amorphous thin film is uncovered, which has the highest ultimate tensile strength ever measured for a nanostructured amorphous material. This silicon carbide (SiC) material exhibits an ultimate tensile strength of over 10 GPa, reaching the regime reserved for strong crystalline materials and approaching levels experimentally shown in graphene nanoribbons. Amorphous SiC strings with high aspect ratios are fabricated, with mechanical modes exceeding quality factors 10^8 at room temperature, the highest value achieved among SiC resonators. These performances are demonstrated faithfully after characterizing the mechanical properties of the thin film using the resonance behaviors of free-standing resonators. This robust thin-film material has significant potential for applications in nanomechanical sensors, solar cells, biological applications, space exploration and other areas requiring strength and stability in dynamic environments. The findings of this study open up new possibilities for the use of amorphous thin-film materials in high-performance applications. △ Less

Submitted 3 July, 2023; originally announced July 2023.

Beating ringdowns of near-degenerate mechanical resonances

Authors: Matthijs H. J. de Jong, Andrea Cupertino, Dongil Shin, Simon Gröblacher, Farbod Alijani, Peter G. Steeneken, Richard A. Norte

Abstract: Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their… ▽ More Mechanical resonators that possess coupled modes with harmonic frequency relations have recently sparked interest due to their suitability for controllable energy transfer and non-Hermitian dynamics. Here, we show coupling between high Q-factor ($>\!\!10^4$) resonances with a nearly 1:1 frequency relation in spatially-symmetric microresonators. We develop and demonstrate a method to analyze their dynamical behavior based on the simultaneous and resonant detection of both spectral peaks, and validate this with experimental results. The frequency difference between the peaks modulates their ringdown, and creates a beat pattern in the linear decay. This method applies both to the externally driven and the Brownian motion (thermal) regime, and allows characterization of both linear and nonlinear parameters. The mechanism behind this method renders it broadly applicable to both optical and electrical readout, as well as to different mechanical systems. This will aid studies using near-degenerate mechanical modes, for e.g., optomechanical energy transfer, synchronization and gyroscopic sensors. △ Less

Submitted 25 August, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Journal ref: Physical Review Applied 20, 024053 (2023)

Mechanical overtone frequency combs

Authors: Matthijs H. J. de Jong, Adarsh Ganesan, Andrea Cupertino, Simon Gröblacher, Richard A. Norte

Abstract: Mechanical frequency combs are poised to bring the applications and utility of optical frequency combs into the mechanical domain. So far, their main challenge has been strict requirements on drive frequencies and power, which complicate operation. We demonstrate a straightforward mechanism to create a frequency comb consisting of mechanical overtones (integer multiples) of a single eigenfrequency… ▽ More Mechanical frequency combs are poised to bring the applications and utility of optical frequency combs into the mechanical domain. So far, their main challenge has been strict requirements on drive frequencies and power, which complicate operation. We demonstrate a straightforward mechanism to create a frequency comb consisting of mechanical overtones (integer multiples) of a single eigenfrequency, by monolithically integrating a suspended dielectric membrane with a counter-propagating optical trap. The periodic optical field modulates the dielectrophoretic force on the membrane at the overtones of a membrane's motion. These overtones share a fixed frequency and phase relation, and constitute a mechanical frequency comb. The periodic optical field also creates an optothermal parametric drive that requires no additional power or external frequency reference. This combination of effects results in an easy-to-use mechanical frequency comb platform that requires no precise alignment, no additional feedback or control electronics, and only uses a single, mW continuous wave laser beam. This highlights the overtone frequency comb as the straightforward future for applications in sensing, metrology and quantum acoustics. △ Less

Submitted 20 March, 2023; v1 submitted 13 July, 2022; originally announced July 2022.

Journal ref: Nat Commun 14, 1458 (2023)

Mechanical dissipation by substrate-mode coupling in SiN resonators

Authors: Matthijs H. J. de Jong, Malte A. ten Wolde, Andrea Cupertino, Simon Gröblacher, Peter G. Steeneken, Richard A. Norte

Abstract: State-of-the-art nanomechanical resonators are heralded as a central component for next-generation clocks, filters, resonant sensors and quantum technologies. To practically build these technologies will require monolithic integration of microchips, resonators and readout systems. While it is widely seen that mounting microchip substrates into a system can greatly impact the performance of high-Q… ▽ More State-of-the-art nanomechanical resonators are heralded as a central component for next-generation clocks, filters, resonant sensors and quantum technologies. To practically build these technologies will require monolithic integration of microchips, resonators and readout systems. While it is widely seen that mounting microchip substrates into a system can greatly impact the performance of high-Q resonators, a systematic study has remained elusive, owing to the variety of physical processes and factors that influence the dissipation. Here, we analytically analyze a mechanism by which substrates couple to resonators manufactured on them, and experimentally demonstrate that this coupling can increase the mechanical dissipation of nanomechanical resonators when the resonance frequencies of resonator and substrate coincide. More generally, we then show a similar coupling mechanism can exist between two adjacent resonators. Since the substrate-mode coupling mechanism strongly depends on both the resonator position on the substrate and the mounting of the substrate, this work provides key design guidelines for high-precision nanomechanical technologies. △ Less

Submitted 26 July, 2022; v1 submitted 2 June, 2022; originally announced June 2022.

Journal ref: Applied Physics Letters 121, 032201 (2022)

Resolution Limits of Resonant Sensors with Duffing Non-Linearity

Authors: Tomás Manzaneque, Murali K. Ghatkesar, Farbod Alijani, Minxing Xu, Richard A. Norte, Peter G. Steeneken

Abstract: The resolution of resonant sensors is fundamentally limited by the presence of noise. Thermomechanical noise, intrinsic to the resonator, sets the ultimate sensor performance when all other noise sources have been eliminated. For linear resonators, the sensing resolution can always be further improved by increasing the driving power. However, this trend cannot continue indefinitely, since at suffi… ▽ More The resolution of resonant sensors is fundamentally limited by the presence of noise. Thermomechanical noise, intrinsic to the resonator, sets the ultimate sensor performance when all other noise sources have been eliminated. For linear resonators, the sensing resolution can always be further improved by increasing the driving power. However, this trend cannot continue indefinitely, since at sufficiently high driving powers non-linear effects emerge and influence the noise performance. As a consequence, the resonator's non-linear characteristics play an inextricable role in determining its ultimate resolution limits. Recently, several works have studied the characteristic performance of non-linear resonators as sensors, with the counter intuitive conclusion that increasing the quality factor of a resonator does not improve its sensing resolution at the thermomechanical limit. In this work we further analyze the ultimate resolution limits, and describe different regimes of performance at integration times below and above the resonator's decay time. We provide an analytical model to elucidate the effects of Duffing non-linearity on the resolution of closed-loop sensors, and validate it using numerical simulations. In contrast to previous works, our model and simulations show that under certain conditions the ultimate sensing resolution of a Duffing resonator can be improved by maximizing its quality factor. With measurements on a nanomechanical membrane resonator, we experimentally verify the model and demonstrate that frequency resolutions can be achieved that surpass the previously known limits. △ Less

Submitted 24 May, 2022; originally announced May 2022.

Comments: 15 pages, 5 figures

Spiderweb nanomechanical resonators via Bayesian optimization: inspired by nature and guided by machine learning

Authors: Dongil Shin, Andrea Cupertino, Matthijs H. J. de Jong, Peter G. Steeneken, Miguel A. Bessa, Richard A. Norte

Abstract: From ultra-sensitive detectors of fundamental forces to quantum networks and sensors, mechanical resonators are enabling next-generation technologies to operate in room temperature environments. Currently, silicon nitride nanoresonators stand as a leading microchip platform in these advances by allowing for mechanical resonators whose motion is remarkably isolated from ambient thermal noise. Howev… ▽ More From ultra-sensitive detectors of fundamental forces to quantum networks and sensors, mechanical resonators are enabling next-generation technologies to operate in room temperature environments. Currently, silicon nitride nanoresonators stand as a leading microchip platform in these advances by allowing for mechanical resonators whose motion is remarkably isolated from ambient thermal noise. However, to date, human intuition has remained the driving force behind design processes. Here, inspired by nature and guided by machine learning, a spiderweb nanomechanical resonator is developed that exhibits vibration modes which are isolated from ambient thermal environments via a novel "torsional soft-clam**" mechanism discovered by the data-driven optimization algorithm. This bio-inspired resonator is then fabricated; experimentally confirming a new paradigm in mechanics with quality factors above 1 billion in room temperature environments. In contrast to other state-of-the-art resonators, this milestone is achieved with a compact design which does not require sub-micron lithographic features or complex phononic bandgaps, making it significantly easier and cheaper to manufacture at large scales. Here we demonstrate the ability of machine learning to work in tandem with human intuition to augment creative possibilities and uncover new strategies in computing and nanotechnology. △ Less

Submitted 13 December, 2021; v1 submitted 10 August, 2021; originally announced August 2021.

Journal ref: Shin, D., Cupertino, A., de, M. H. J., Steeneken, P. G., Bessa, M. A., Norte, R. A., Spiderweb Nanomechanical Resonators via Bayesian Optimization: Inspired by Nature and Guided by Machine Learning. Adv. Mater. 2021, 2106248

Coherent mechanical noise cancellation and cooperativity competition in optomechanical arrays

Authors: Matthijs H. J. de Jong, Jie Li, Claus Gärtner, Richard A. Norte, Simon Gröblacher

Abstract: Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechani… ▽ More Studying the interplay between multiple coupled mechanical resonators is a promising new direction in the field of optomechanics. Understanding the dynamics of the interaction can lead to rich new effects, such as enhanced coupling and multi-body physics. In particular, multi-resonator optomechanical systems allow for distinct dynamical effects due to the optical cavity coherently coupling mechanical resonators. Here, we study the mechanical response of two SiN membranes and a single optical mode, and find that the cavity induces a time delay between the local and cavity-transduced thermal noises experienced by the resonators. This results in an optomechanical phase lag that causes destructive interference, cancelling the mechanical thermal noise by up to 20 dB in a controllable fashion, matching our theoretical expectation. Based on the effective coupling between membranes, we further propose, derive and measure a collective effect, cooperativity competition on mechanical dissipation, whereby the linewidth of one resonator depends on the coupling efficiency (cooperativity) of the other resonator. △ Less

Submitted 2 February, 2022; v1 submitted 21 December, 2020; originally announced December 2020.

Journal ref: Optica 9, 170-176 (2022)

Quantum Weak Equivalence Principle and the Gravitational Casimir Effect in Superconductors

Authors: Sebastian Bahamonde, Mir Faizal, James Q. Quach, Richard A. Norte

Abstract: We will use Fisher information to properly analyze the quantum weak equivalence principle. We argue that gravitational waves will be partially reflected by superconductors. This will occur as the violation of the weak equivalence principle in Cooper pairs is larger than the surrounding ionic lattice. Such reflections of virtual gravitational waves by superconductors can produce a gravitational Cas… ▽ More We will use Fisher information to properly analyze the quantum weak equivalence principle. We argue that gravitational waves will be partially reflected by superconductors. This will occur as the violation of the weak equivalence principle in Cooper pairs is larger than the surrounding ionic lattice. Such reflections of virtual gravitational waves by superconductors can produce a gravitational Casimir effect, which may be detected using currently available technology. △ Less

Submitted 1 December, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: Essay received an honorable mention in the Gravity Research Foundation Essay Competition 2020. 9 pages, 3 figures. Matches published version in IJMPD

Journal ref: Int.J.Mod.Phys.D 29 (2020), 14

Feedback cooling of a room temperature mechanical oscillator close to its motional groundstate

Authors: **gkun Guo, Richard A. Norte, Simon Gröblacher

Abstract: Preparing mechanical systems in their lowest possible entropy state, the quantum ground state, starting from a room temperature environment is a key challenge in quantum optomechanics. This would not only enable creating quantum states of truly macroscopic systems, but at the same time also lay the groundwork for a new generation of quantum-limited mechanical sensors in ambient environments. Laser… ▽ More Preparing mechanical systems in their lowest possible entropy state, the quantum ground state, starting from a room temperature environment is a key challenge in quantum optomechanics. This would not only enable creating quantum states of truly macroscopic systems, but at the same time also lay the groundwork for a new generation of quantum-limited mechanical sensors in ambient environments. Laser cooling of optomechanical devices using the radiation pressure force combined with cryogenic precooling has been successful at demonstrating ground state preparation of various devices, while a similar demonstration starting from a room temperature environment remains an outstanding goal. Here, we combine integrated nanophotonics with phononic band gap engineering to simultaneously overcome prior limitations in the isolation from the surrounding environment and the achievable mechanical frequencies, as well as limited optomechanical coupling strength, demonstrating a single-photon cooperativity of 200. This new microchip technology allows us to feedback cool a mechanical resonator to around 1 mK, near its motional ground state, from room temperature. Our experiment marks a major step toward accessible, widespread quantum technologies with mechanical resonators. △ Less

Submitted 24 June, 2020; v1 submitted 4 November, 2019; originally announced November 2019.

Comments: The source data for the figures is available at https://doi.org/10.5281/zenodo.3906185

Journal ref: Phys. Rev. Lett. 123, 223602 (2019)

Microwave-to-optics conversion using a mechanical oscillator in its quantum groundstate

Authors: Moritz Forsch, Robert Stockill, Andreas Wallucks, Igor Marinkovic, Claus Gärtner, Richard A. Norte, Frank van Otten, Andrea Fiore, Kartik Srinivasan, Simon Gröblacher

Abstract: Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrate… ▽ More Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrated using mechanical transducers, they have so far all operated with a substantial thermal noise background. Here, we overcome this limitation and demonstrate coherent conversion between GHz microwave signals and the optical telecom band with a thermal background of less than one phonon. We use an integrated, on-chip electro-opto-mechanical device that couples surface acoustic waves driven by a resonant microwave signal to an optomechanical crystal featuring a 2.7 GHz mechanical mode. We initialize the mechanical mode in its quantum groundstate, which allows us to perform the transduction process with minimal added thermal noise, while maintaining an optomechanical cooperativity >1, so that microwave photons mapped into the mechanical resonator are effectively upconverted to the optical domain. We further verify the preservation of the coherence of the microwave signal throughout the transduction process. △ Less

Submitted 2 May, 2020; v1 submitted 18 December, 2018; originally announced December 2018.

Journal ref: Nature Phys. 16, 69-74 (2020)

Integrated optomechanical arrays of two high reflectivity SiN membranes

Authors: Claus Gärtner, João P. Moura, Wouter Haaxman, Richard A. Norte, Simon Gröblacher

Abstract: Multi-element cavity optomechanics constitutes a direction to observe novel effects with mechanical resonators. Several exciting ideas include superradiance, increased optomechanical coupling, and quantum effects between distinct mechanical modes among others. Realizing these experiments has so far been difficult, because of the need for extremely precise positioning of the elements relative to on… ▽ More Multi-element cavity optomechanics constitutes a direction to observe novel effects with mechanical resonators. Several exciting ideas include superradiance, increased optomechanical coupling, and quantum effects between distinct mechanical modes among others. Realizing these experiments has so far been difficult, because of the need for extremely precise positioning of the elements relative to one another due to the high-reflectivity required for each element. Here we overcome this challenge and present the fabrication of monolithic arrays of two highly reflective mechanical resonators in a single chip. We characterize the optical spectra and losses of these 200 $μ$m-long Fabry-Pérot interferometers, measuring finesse values of up to 220. In addition, we observe an enhancement of the coupling rate between the cavity field and the mechanical center-of-mass mode compared to the single membrane case. Further enhancements in coupling with these devices are predicted, potentially reaching the single-photon strong coupling regime, giving these integrated structures an exciting prospect for future multi-mode quantum experiments. △ Less

Submitted 15 November, 2018; v1 submitted 17 September, 2018; originally announced September 2018.

Journal ref: Nano Lett. 18, 7171 (2018)

Platform for measurements of the Casimir force between two superconductors

Authors: Richard A. Norte, Moritz Forsch, Andreas Wallucks, Igor Marinkovic, Simon Gröblacher

Abstract: Several experimental demonstrations of the Casimir force between two closely spaced bodies have been realized over the past two decades. Extending the theory to incorporate the behavior of the force between two superconducting films close to their transition temperature has resulted in competing predictions. To date, no experiment exists that can test these theories, partly due to the difficulty i… ▽ More Several experimental demonstrations of the Casimir force between two closely spaced bodies have been realized over the past two decades. Extending the theory to incorporate the behavior of the force between two superconducting films close to their transition temperature has resulted in competing predictions. To date, no experiment exists that can test these theories, partly due to the difficulty in aligning two superconductors in close proximity, while still allowing for a temperature-independent readout of the arising force between them. Here we present an on-chip platform based on an optomechanical cavity in combination with a grounded superconducting capacitor, which overcomes these challenges and opens up the possibility to probe modifications to the Casimir effect between two closely spaced, freestanding superconductors as they transition into a superconducting state. We also perform preliminary force measurements that demonstrate the capability of these devices to probe the interplay between two widely measured quantum effects: Casimir forces and superconductivity. △ Less

Submitted 20 July, 2018; v1 submitted 26 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Lett. 121, 030405 (2018)

Near-field coupling of a levitated nanoparticle to a photonic crystal cavity

Authors: Lorenzo Magrini, Richard A. Norte, Ralf Riedinger, Igor Marinković, David Grass, Uroš Delić, Simon Gröblacher, Sungkun Hong, Markus Aspelmeyer

Abstract: Quantum control of levitated dielectric particles is an emerging subject in quantum optomechanics. A major challenge is to efficiently measure and manipulate the particle's motion at the Heisenberg uncertainty limit. Here we present a nanophotonic interface suited to address this problem. By optically trap** a 150 nm silica particle and placing it in the near field of a photonic crystal cavity,… ▽ More Quantum control of levitated dielectric particles is an emerging subject in quantum optomechanics. A major challenge is to efficiently measure and manipulate the particle's motion at the Heisenberg uncertainty limit. Here we present a nanophotonic interface suited to address this problem. By optically trap** a 150 nm silica particle and placing it in the near field of a photonic crystal cavity, we achieve tunable single-photon optomechanical coupling of up to $g_0/2π=9$ kHz, three orders of magnitude larger than previously reported for levitated cavity optomechanical systems. Efficient collection and guiding of light through the nanophotonic structure results in a per-photon displacement sensitivity that is increased by two orders of magnitude compared to conventional far-field detection. The demonstrated performance shows a promising route for room temperature quantum optomechanics. △ Less

Submitted 13 January, 2019; v1 submitted 18 April, 2018; originally announced April 2018.

Journal ref: Optica 5, 1597-1602 (2018)

Nanofabricated tips for device-based scanning tunneling microscopy

Authors: Maarten Leeuwenhoek, Richard A. Norte, Koen M. Bastiaans, Doohee Cho, Irene Battisti, Yaroslav M. Blanter, Simon Gröblacher, Milan P. Allan

Abstract: We report on the fabrication and performance of a new kind of tip for scanning tunneling microscopy. By fully incorporating a metallic tip on a silicon chip using modern micromachining and nanofabrication techniques, we realize so-called smart tips and show the possibility of device-based STM tips. Contrary to conventional etched metal wire tips, these can be integrated into lithographically defin… ▽ More We report on the fabrication and performance of a new kind of tip for scanning tunneling microscopy. By fully incorporating a metallic tip on a silicon chip using modern micromachining and nanofabrication techniques, we realize so-called smart tips and show the possibility of device-based STM tips. Contrary to conventional etched metal wire tips, these can be integrated into lithographically defined electrical circuits. We describe a new fabrication method to create a defined apex on a silicon chip and experimentally demonstrate the high performance of the smart tips, both in stability and resolution. In situ tip preparation methods are possible and we verify that they can resolve the herringbone reconstruction and Friedel oscillations on Au(111) surfaces. We further present an overview of possible applications. △ Less

Submitted 2 May, 2020; v1 submitted 22 December, 2017; originally announced December 2017.

Journal ref: Nanotechnology 30, 335702 (2019)

Centimeter-scale suspended photonic crystal mirrors

Authors: Joao P. Moura, Richard A. Norte, **gkun Guo, Clemens Schäfermeier, Simon Gröblacher

Abstract: Demand for lightweight, highly reflective and mechanically compliant mirrors for optics experiments has seen a significant surge. In this aspect, photonic crystal (PhC) membranes are ideal alternatives to conventional mirrors, as they provide high reflectivity with only a single suspended layer of patterned dielectric material. However, due to limitations in nanofabrication, these devices are usua… ▽ More Demand for lightweight, highly reflective and mechanically compliant mirrors for optics experiments has seen a significant surge. In this aspect, photonic crystal (PhC) membranes are ideal alternatives to conventional mirrors, as they provide high reflectivity with only a single suspended layer of patterned dielectric material. However, due to limitations in nanofabrication, these devices are usually not wider than 300 $μ$m. Here we experimentally demonstrate suspended PhC mirrors spanning areas up to 10$\times$10 mm. We overcome limitations imposed by the size of the PhC and measure reflectivities greater than 90% on 56 nm thick mirrors at a wavelength of 1550 nm -- an unrivaled performance compared to PhC mirrors with micro scale diameters. These structures bridge the gap between nano scale technologies and macroscopic optical elements. △ Less

Submitted 19 January, 2018; v1 submitted 25 July, 2017; originally announced July 2017.

Journal ref: Opt. Express 26, 1895-1909 (2018)

Hanbury Brown and Twiss interferometry of single phonons from an optomechanical resonator

Authors: Sungkun Hong, Ralf Riedinger, Igor Marinkovic, Andreas Wallucks, Sebastian G. Hofer, Richard A. Norte, Markus Aspelmeyer, Simon Gröblacher

Abstract: Nano- and micromechanical solid-state quantum devices have become a focus of attention. Reliably generating nonclassical states of their motion is of interest both for addressing fundamental questions about macroscopic quantum phenomena and for develo** quantum technologies in the domains of sensing and transduction. We used quantum optical control techniques to conditionally generate single-pho… ▽ More Nano- and micromechanical solid-state quantum devices have become a focus of attention. Reliably generating nonclassical states of their motion is of interest both for addressing fundamental questions about macroscopic quantum phenomena and for develo** quantum technologies in the domains of sensing and transduction. We used quantum optical control techniques to conditionally generate single-phonon Fock states of a nanomechanical resonator. We performed a Hanbury Brown and Twiss-type experiment that verified the nonclassical nature of the phonon state without requiring full state reconstruction. Our result establishes purely optical quantum control of a mechanical oscillator at the single-phonon level. △ Less

Submitted 1 May, 2018; v1 submitted 12 June, 2017; originally announced June 2017.

Journal ref: Science 358, 203-206 (2017)

Integrated optical force sensors using focusing photonic crystal arrays

Authors: **gkun Guo, Richard A. Norte, Simon Gröblacher

Abstract: Mechanical oscillators are at the heart of many sensor applications. Recently several groups have developed oscillators that are probed optically, fabricated from high-stress silicon nitride films. They exhibit outstanding force sensitivities of a few aN/Hz$^{1/2}$ and can also be made highly reflective, for efficient detection. The optical read-out usually requires complex experimental setups, in… ▽ More Mechanical oscillators are at the heart of many sensor applications. Recently several groups have developed oscillators that are probed optically, fabricated from high-stress silicon nitride films. They exhibit outstanding force sensitivities of a few aN/Hz$^{1/2}$ and can also be made highly reflective, for efficient detection. The optical read-out usually requires complex experimental setups, including positioning stages and bulky cavities, making them impractical for real applications. In this paper we propose a novel way of building fully integrated all-optical force sensors based on low-loss silicon nitride mechanical resonators with a photonic crystal reflector. We can circumvent previous limitations in stability and complexity by simulating a suspended focusing photonic crystal, purely made of silicon nitride. Our design allows for an all integrated sensor, built out of a single block that integrates a full Fabry-Pérot cavity, without the need for assembly or alignment. The presented simulations will allow for a radical simplification of sensors based on high-Q silicon nitride membranes. Our results comprise, to the best of our knowledge, the first simulations of a focusing mirror made from a mechanically suspended flat membrane with subwavelength thickness. Cavity lengths between a few hundred $μ$m and mm should be directly realizable. △ Less

Submitted 12 April, 2017; v1 submitted 9 February, 2017; originally announced February 2017.

Journal ref: Opt. Express 25, 9196-9203 (2017)

Non-classical correlations between single photons and phonons from a mechanical oscillator

Authors: Ralf Riedinger, Sungkun Hong, Richard A. Norte, Joshua A. Slater, Juying Shang, Alexander G. Krause, Vikas Anant, Markus Aspelmeyer, Simon Gröblacher

Abstract: Interfacing a single photon with another quantum system is a key capability in modern quantum information science. It allows quantum states of matter, such as spin states of atoms, atomic ensembles or solids, to be prepared and manipulated by photon counting and, in particular, to be distributed over long distances. Such light-matter interfaces have become crucial to fundamental tests of quantum p… ▽ More Interfacing a single photon with another quantum system is a key capability in modern quantum information science. It allows quantum states of matter, such as spin states of atoms, atomic ensembles or solids, to be prepared and manipulated by photon counting and, in particular, to be distributed over long distances. Such light-matter interfaces have become crucial to fundamental tests of quantum physics and realizations of quantum networks. Here we report non-classical correlations between single photons and phonons -- the quanta of mechanical motion -- from a nanomechanical resonator. We implement a full quantum protocol involving initialization of the resonator in its quantum ground state of motion and subsequent generation and read-out of correlated photonphonon pairs. The observed violation of a Cauchy-Schwarz inequality is clear evidence for the non-classical nature of the mechanical state generated. Our results demonstrate the availability of on-chip solid-state mechanical resonators as light-matter quantum interfaces. The performance we achieved will enable studies of macroscopic quantum phenomena as well as applications in quantum communication, as quantum memories and as quantum transducers. △ Less

Submitted 23 February, 2016; v1 submitted 16 December, 2015; originally announced December 2015.

Journal ref: Nature 530, 313-316 (2016)

Mechanical Resonators for Quantum Optomechanics Experiments at Room Temperature

Authors: Richard A. Norte, Joao P. Moura, Simon Gröblacher

Abstract: All quantum optomechanics experiments to date operate at cryogenic temperatures, imposing severe technical challenges and fundamental constraints. Here we present a novel design of on-chip mechanical resonators which exhibit fundamental modes with frequencies $f$ and mechanical quality factors $Q_\mathrm{m}$ sufficient to enter the optomechanical quantum regime at room temperature. We overcome pre… ▽ More All quantum optomechanics experiments to date operate at cryogenic temperatures, imposing severe technical challenges and fundamental constraints. Here we present a novel design of on-chip mechanical resonators which exhibit fundamental modes with frequencies $f$ and mechanical quality factors $Q_\mathrm{m}$ sufficient to enter the optomechanical quantum regime at room temperature. We overcome previous limitations by designing ultrathin, high-stress silicon nitride (Si$_3$N$_4$) membranes, with tensile stress in the resonators' clamps close to the ultimate yield strength of the material. By patterning a photonic crystal on the SiN membranes, we observe reflectivities greater than 99%. These on-chip resonators have remarkably low mechanical dissipation, with $Q_\mathrm{m}$$\sim$$10^8$, while at the same time exhibiting large reflectivities. This makes them a unique platform for experiments towards the observation of massive quantum behavior at room temperature. △ Less

Submitted 6 April, 2016; v1 submitted 19 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. Lett. 116, 147202 (2016)