-
Single-peak and narrow-band mid-infrared thermal emitters driven by mirror-coupled plasmonic quasi-BIC metasurfaces
Authors:
Sen Yang,
Mingze He,
Chuchuan Hong,
Josh Nordlander,
Jon-Paul Maria,
Joshua D. Caldwell,
Justus C. Ndukaife
Abstract:
Wavelength-selective thermal emitters (WS-EMs) hold considerable appeal due to the scarcity of cost-effective, narrow-band sources in the mid-to-long-wave infrared spectrum. WS-EMs achieved via dielectric materials typically exhibit thermal emission peaks with high quality factors (Q factors), but their optical responses are prone to temperature fluctuations. Metallic EMs, on the other hand, show…
▽ More
Wavelength-selective thermal emitters (WS-EMs) hold considerable appeal due to the scarcity of cost-effective, narrow-band sources in the mid-to-long-wave infrared spectrum. WS-EMs achieved via dielectric materials typically exhibit thermal emission peaks with high quality factors (Q factors), but their optical responses are prone to temperature fluctuations. Metallic EMs, on the other hand, show negligible drifts with temperature changes, but their Q factors usually hover around 10. In this study, we introduce and experimentally verify a novel EM grounded in plasmonic quasi-bound states in the continuum (BICs) within a mirror-coupled system. Our design numerically delivers an ultra-narrowband single peak with a Q factor of approximately 64, and near-unity absorptance that can be freely tuned within an expansive band of more than 10 μm. By introducing air slots symmetrically, the Q factor can be further augmented to around 100. Multipolar analysis and phase diagrams are presented to elucidate the operational principle. Importantly, our infrared spectral measurements affirm the remarkable resilience of our designs' resonance frequency in the face of temperature fluctuations over 300 degrees Celsius. Additionally, we develop an effective impedance model based on the optical nanoantenna theory to understand how further tuning of the emission properties is achieved through precise engineering of the slot. This research thus heralds the potential of applying plasmonic quasi-BICs in designing ultra-narrowband, temperature-stable thermal emitters in mid-infrared. Moreover, such a concept may be adaptable to other frequency ranges, such as near-infrared, Terahertz, and Gigahertz.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Nonlinear optical diode effect in a magnetic Weyl semimetal
Authors:
Christian Tzschaschel,
Jian-Xiang Qiu,
Xue-Jian Gao,
Hou-Chen Li,
Chunyu Guo,
Hung-Yu Yang,
Cheng-** Zhang,
Ying-Ming Xie,
Yu-Fei Liu,
Anyuan Gao,
Damien Bérubé,
Thao Dinh,
Sheng-Chin Ho,
Yuqiang Fang,
Fuqiang Huang,
Johanna Nordlander,
Qiong Ma,
Fazel Tafti,
Philip J. W. Moll,
Kam Tuen Law,
Su-Yang Xu
Abstract:
Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimeta…
▽ More
Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimetal CeAlSi, where the magnetization introduces a pronounced directionality in the nonlinear optical second-harmonic generation (SHG). We show demonstrate a six-fold change of the measured SHG intensity between opposite propagation directions over a bandwidth exceeding 250 meV. Supported by density-functional theory, we establish the linearly dispersive bands emerging from Weyl nodes as the origin of this broadband effect. We further demonstrate current-induced magnetization switching and thus electrical control of the NODE. Our results advance ongoing research to identify novel nonlinear optical/transport phenomena in magnetic topological materials and further opens new pathways for the unidirectional manipulation of light.
△ Less
Submitted 8 April, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Antiferromagnetic metal phase in an electron-doped rare-earth nickelate
Authors:
Qi Song,
Spencer Doyle,
Grace A. Pan,
Ismail El Baggari,
Dan Ferenc Segedin,
Denisse Cordova Carrizales,
Johanna Nordlander,
Christian Tzschaschel,
James R. Ehrets,
Zubia Hasan,
Hesham El-Sherif,
Jyoti Krishna,
Chase Hanson,
Harrison LaBollita,
Aaron Bostwick,
Chris Jozwiak,
Eli Rotenberg,
Su-Yang Xu,
Alessandra Lanzara,
Alpha T. N'Diaye,
Colin A. Heikes,
Yaohua Liu,
Hanjong Paik,
Charles M. Brooks,
Betul Pamuk
, et al. (6 additional authors not shown)
Abstract:
Long viewed as passive elements, antiferromagnetic materials have emerged as promising candidates for spintronic devices due to their insensitivity to external fields and potential for high-speed switching. Recent work exploiting spin and orbital effects has identified ways to electrically control and probe the spins in metallic antiferromagnets, especially in noncollinear or noncentrosymmetric sp…
▽ More
Long viewed as passive elements, antiferromagnetic materials have emerged as promising candidates for spintronic devices due to their insensitivity to external fields and potential for high-speed switching. Recent work exploiting spin and orbital effects has identified ways to electrically control and probe the spins in metallic antiferromagnets, especially in noncollinear or noncentrosymmetric spin structures. The rare earth nickelate NdNiO3 is known to be a noncollinear antiferromagnet where the onset of antiferromagnetic ordering is concomitant with a transition to an insulating state. Here, we find that for low electron do**, the magnetic order on the nickel site is preserved while electronically a new metallic phase is induced. We show that this metallic phase has a Fermi surface that is mostly gapped by an electronic reconstruction driven by the bond disproportionation. Furthermore, we demonstrate the ability to write to and read from the spin structure via a large zero-field planar Hall effect. Our results expand the already rich phase diagram of the rare-earth nickelates and may enable spintronics applications in this family of correlated oxides.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Epitaxy of hexagonal ABO$_3$ quantum materials
Authors:
Johanna Nordlander,
Margaret A. Anderson,
Charles M. Brooks,
Megan E. Holtz,
Julia A. Mundy
Abstract:
Hexagonal $AB$O$_3$ oxides ($A$, $B$ = cation) are a rich materials class for realizing novel quantum phenomena. Their hexagonal symmetry, oxygen trigonal bipyramid coordination and quasi-two dimensional layering give rise to properties distinct from those of the cubic $AB$O$_3$ perovskites. As bulk materials, most of the focus in this materials class has been on the rare earth manganites, $R$MnO…
▽ More
Hexagonal $AB$O$_3$ oxides ($A$, $B$ = cation) are a rich materials class for realizing novel quantum phenomena. Their hexagonal symmetry, oxygen trigonal bipyramid coordination and quasi-two dimensional layering give rise to properties distinct from those of the cubic $AB$O$_3$ perovskites. As bulk materials, most of the focus in this materials class has been on the rare earth manganites, $R$MnO$_3$ ($R$ = rare earth); these materials display coupled ferroelectricity and antiferromagnetic order. In this review, we focus on the thin film manifestations of the hexagonal $AB$O$_3$ oxides. We cover the stability of the hexagonal oxides and substrates which can be used to template the hexagonal structure. We show how the thin film geometry not only allows for further tuning of the bulk-stable manganites but also the realization of metastable hexagonal oxides such as the $R$FeO$_3$ that combine ferroelectricity with weak ferromagnetic order. The thin film geometry is a promising platform to stabilize additional metastable hexagonal oxides to search for predicted high-temperature superconductivity and topological phases in this materials class.
△ Less
Submitted 16 September, 2022;
originally announced September 2022.
-
Epitaxial integration of improper ferroelectric h-YMnO$_3$ thin films in heterostructures
Authors:
J. Nordlander,
M. D. Rossell,
M. Campanini,
M. Fiebig,
M. Trassin
Abstract:
We report on multiple fundamental qualitative improvements in the growth of improper ferroelectric hexagonal YMnO$_3$ (YMO) thin films and heterostructures by pulsed laser deposition (PLD). By a combination of pre-growth substrate annealing and low-energy-fluence PLD, we obtain a two-dimensional growth mode of the YMO films on yttria-stabilized zirconia (YSZ) with ultralow roughness and devoid of…
▽ More
We report on multiple fundamental qualitative improvements in the growth of improper ferroelectric hexagonal YMnO$_3$ (YMO) thin films and heterostructures by pulsed laser deposition (PLD). By a combination of pre-growth substrate annealing and low-energy-fluence PLD, we obtain a two-dimensional growth mode of the YMO films on yttria-stabilized zirconia (YSZ) with ultralow roughness and devoid of misoriented nanocrystalline inclusions. By inserting a sacrificial manganite layer capped with conducting indium-tin oxide between the substrate and the final film, the latter is grown in a fully lattice-relaxed mode and, thus, without any misfit dislocations while maintaining the extraordinary flatness of the films grown directly on pre-annealed YSZ. This provides a template for the fabrication of heterostructures based on hexagonal manganites as promising class of multiferroics with improper room-temperature ferroelectricity and the implementation of these into technologically relevant epitaxial metal|ferroelectric-type multilayers.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Long-lived modulation of plasmonic absorption by ballistic thermal injection
Authors:
John A. Tomko,
Evan L. Runnerstrom,
Yi-Siang Wang,
Joshua R. Nolen,
David H. Olson,
Kyle P. Kelley,
Angela Cleri,
Josh Nordlander,
Joshua D. Caldwell,
Oleg V. Prezhdo,
Jon-Paul Maria,
Patrick E. Hopkins
Abstract:
Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast pl…
▽ More
Energy and charge transfer across metal-semiconductor interfaces are the fundamental driving forces for a broad range of applications, such as computing, energy harvesting, and photodetection. However, the exact roles and physical separation of these two phenomena remains unclear, particularly in plasmonically-excited systems or cases of strong nonequilibrium. We report on a series of ultrafast plasmonic measurements that provide a direct measure of electronic distributions, both spatially and temporally, following optical excitation of a metal-semiconductor heterostructure. For the first time, we explicitly show that in cases of strong non-equilibrium, a novel energy transduction mechanism arises at the metal/semiconductor interface. We find that hot electrons in the metal contact transfer their energy to pre-existing electrons in the semiconductor, without transfer of charge. These experimental results findings are well-supported by both rigorous multilayer optical modeling and first-principle, ab initio calculations.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
Combined electrostatic and strain engineering of BiFeO$_3$ thin films at the morphotropic phase boundary
Authors:
Johanna Nordlander,
Bastien F. Grosso,
Marta D. Rossell,
Aline Maillard,
Elzbieta Gradauskaite,
Nicola A. Spaldin,
Manfred Fiebig,
Morgan Trassin
Abstract:
Multiferroic BiFeO$_3$ (BFO) possesses a rich phase diagram that allows strain tuning of its properties in thin-film form. In particular, at large compressive strain, a supertetragonal (T) phase with giant polarization is stabilized over the more common rhombohedral (R) structure. To utilize the functionality of such metastable BFO phases in device applications, it is essential to understand the f…
▽ More
Multiferroic BiFeO$_3$ (BFO) possesses a rich phase diagram that allows strain tuning of its properties in thin-film form. In particular, at large compressive strain, a supertetragonal (T) phase with giant polarization is stabilized over the more common rhombohedral (R) structure. To utilize the functionality of such metastable BFO phases in device applications, it is essential to understand the ferroelectric phase evolution upon insertion in nanoscale heterostructures. Here, we explore the emergence of ferroelectric phases close to the morphotropic phase boundary in compressively strained BFO during thin-film growth using in-situ optical second harmonic generation. We find that the epitaxial films form at the growth temperature in the ideal T phase without critical thickness for the polarization. Signatures of T-like and R-like monoclinically distorted phases only appear upon sample cooling. We furthermore demonstrate a robustness of single-domain polarization in the high-temperature T phase during the growth of capacitor-like metal|ferroelectric|metal heterostructures. Here, a reduction in tetragonality of the T phase, rather than domain formation, lowers the electrostatic energy. At this lower tetragonality, density-functional calculations and scanning transmission electron microscopy point to the stabilization of a new metastable R-like monoclinic structure upon cooling the heterostructure down to room temperature. Our results thus show that the combination of strain and electrostatic phase stabilization in BFO heterostructures yields a prominent platform for exploring ferroelectric phases and realizing ultrathin ferroelectric devices.
△ Less
Submitted 25 October, 2022; v1 submitted 19 May, 2020;
originally announced May 2020.
-
Inversion-symmetry engineering in sub-unit-cell-layered oxide thin films
Authors:
J. Nordlander,
M. D. Rossell,
M. Campanini,
M. Fiebig,
M. Trassin
Abstract:
Inversion symmetry breaking is a ubiquitous concept in condensed-matter science. On the one hand, it is a prerequisite for many technologically relevant effects such as piezoelectricity, photovoltaic and nonlinear optical properties and spin-transport phenomena. On the other hand, it may determine abstract properties such as the electronic topology in quantum materials. Therefore, the creation of…
▽ More
Inversion symmetry breaking is a ubiquitous concept in condensed-matter science. On the one hand, it is a prerequisite for many technologically relevant effects such as piezoelectricity, photovoltaic and nonlinear optical properties and spin-transport phenomena. On the other hand, it may determine abstract properties such as the electronic topology in quantum materials. Therefore, the creation of materials where inversion symmetry can be turned on or off by design may be the ultimate route towards controlling parity-related phenomena and functionalities. Here, we engineer the symmetry of ultrathin epitaxial oxide films by sub-unit-cell growth control. We reversibly activate and deactivate inversion symmetry in the layered hexagonal manganites, h-RMnO$_3$ with R = Y, Er, Tb. While an odd number of half-unit-cell layers exhibits a breaking of inversion symmetry through its arrangement of MnO$_5$ bipyramids, an even number of such half-unit-cell layers takes on a centrosymmetric structure. Here we control the resulting symmetry by tracking the growth in situ via optical second-harmonic generation. We furthermore demonstrate that our symmetry engineering works independent of the choice of R and even in heterostructures mixing constituents with different R in a two-dimensional growth mode. Symmetry engineering on the atomic level thus suggests a new platform for the controlled activation and deactivation of symmetry-governed functionalities in oxide-electronic epitaxial thin films.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Positive Supercompilation for a Higher-Order Call-By-Value Language
Authors:
Peter A. Jonsson,
Johan Nordlander
Abstract:
Previous deforestation and supercompilation algorithms may introduce accidental termination when applied to call-by-value programs. This hides loo** bugs from the programmer, and changes the behavior of a program depending on whether it is optimized or not. We present a supercompilation algorithm for a higher-order call-by-value language and prove that the algorithm both terminates and preserves…
▽ More
Previous deforestation and supercompilation algorithms may introduce accidental termination when applied to call-by-value programs. This hides loo** bugs from the programmer, and changes the behavior of a program depending on whether it is optimized or not. We present a supercompilation algorithm for a higher-order call-by-value language and prove that the algorithm both terminates and preserves termination properties. This algorithm utilizes strictness information to decide whether to substitute or not and compares favorably with previous call-by-name transformations.
△ Less
Submitted 18 August, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
