Showing 1–5 of 5 results for author: Nikooroo, M

Mitigating Collisions in Sidelink NR V2X: A Study on Cooperative Resource Allocation

Authors: Mohammadsaleh Nikooroo, Juan Estrada-Jimenez, Aurel Machalek, Jerome Harri, Thomas Engel, Ion Turcanu

Abstract: New Radio (NR) Vehicle-to-Everything (V2X) Sidelink (SL), an integral part of the 5G NR standard, is expected to revolutionize the automotive and rail industries by enabling direct and low-latency exchange of critical information between traffic participants independently of cellular networks. However, this advancement depends primarily on efficient SL resource allocation. Mode 2(a) is a well-know… ▽ More New Radio (NR) Vehicle-to-Everything (V2X) Sidelink (SL), an integral part of the 5G NR standard, is expected to revolutionize the automotive and rail industries by enabling direct and low-latency exchange of critical information between traffic participants independently of cellular networks. However, this advancement depends primarily on efficient SL resource allocation. Mode 2(a) is a well-known method for this purpose, where each node autonomously selects resources. However, this method is prone to packet collisions due to the hidden-node problem. In this paper, we propose a cooperative scheduling method that could potentially address this issue. We describe an extension of Mode 2(a) that allows nodes to share resource allocation information at two hops. Initial simulation results show a promising improvement over Mode 2(a). △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: arXiv admin note: This version has been removed by arXiv administrators as the submitter did not have the right to agree to the license at the time of submission

Multi-hop Relaying with Mixed Half and Full Duplex Relays for Offloading to MEC

Authors: Pavel Mach, Zdenek Becvar, Mohammadsaleh Nikooroo

Abstract: In this paper, we focus on offloading a computing task from a user equipment (UE) to a multi-access edge computing (MEC) server via multi-hop relaying. We assume a general relaying case where relays are energy-constrained devices, such as other UEs, internet of things (IoT) devices, or unmanned aerial vehicles. To this end, we formulate the problem as a minimization of the sum energy consumed by t… ▽ More In this paper, we focus on offloading a computing task from a user equipment (UE) to a multi-access edge computing (MEC) server via multi-hop relaying. We assume a general relaying case where relays are energy-constrained devices, such as other UEs, internet of things (IoT) devices, or unmanned aerial vehicles. To this end, we formulate the problem as a minimization of the sum energy consumed by the energy-constrained devices under the constraint on the maximum requested time of the task processing. Then, we propose a multi-hop relaying combining half and full duplexes at each individual relay involved in the offloading. We proof that the proposed multi-hop relaying is convex, thus it can be optimized by conventional convex optimization methods. We show our proposal outperforms existing multi-hop relaying schemes in terms of probability that tasks are processed within required time by up to 38\% and, at the same time, decreases energy consumption by up to 28%. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Journal ref: Paper presented at IEEE GLOBECOM Workshop 2023 (4th Workshop on Emerging Topics in 6G Communications)

Channel Reuse for Backhaul in UAV Mobile Networks with User QoS Guarantee

Authors: Mohammadsaleh Nikooroo, Zdenek Becvar, Omid Esrafilian, David Gesbert

Abstract: In mobile networks, unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) can effectively improve performance. Nevertheless, such potential improvement requires an efficient positioning of the FlyBS. In this paper, we study the problem of sum downlink capacity maximization in FlyBS-assisted networks with mobile users and with a consideration of wireless backhaul with channel reus… ▽ More In mobile networks, unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) can effectively improve performance. Nevertheless, such potential improvement requires an efficient positioning of the FlyBS. In this paper, we study the problem of sum downlink capacity maximization in FlyBS-assisted networks with mobile users and with a consideration of wireless backhaul with channel reuse while a minimum required capacity to every user is guaranteed. The problem is formulated under constraints on the FlyBS's flying speed, propulsion power consumption, and transmission power for both of flying and ground base stations. None of the existing solutions maximizing the sum capacity can be applied due to the combination of these practical constraints. This paper pioneers in an inclusion of all these constraints together with backhaul to derive the optimal 3D positions of the FlyBS and to optimize the transmission power allocation for the channels at both backhaul and access links as the users move over time. The proposed solution is geometrical based, and it shows via simulations a significant increase in the sum capacity (up by 19%-47%) compared with baseline schemes where one or more of the aspects of backhaul communication, transmission power allocation, and FlyBS's positioning are not taken into account. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: Accepted in IEEE ICC 2023 Symposium

Sum Capacity Maximization in Multi-Hop Mobile Networks with Flying Base Stations

Authors: Mohammadsaleh Nikooroo, Omid Esrafilian, Zdenek Becvar, David Gesbert

Abstract: Deployment of multi-hop network of unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) presents a remarkable potential to effectively enhance the performance of wireless networks. Such potential enhancement, however, relies on an efficient positioning of the FlyBSs as well as a management of resources. In this paper, we study the problem of sum capacity maximization in an exten… ▽ More Deployment of multi-hop network of unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) presents a remarkable potential to effectively enhance the performance of wireless networks. Such potential enhancement, however, relies on an efficient positioning of the FlyBSs as well as a management of resources. In this paper, we study the problem of sum capacity maximization in an extended model for mobile networks where multiple FlyBSs are deployed between the ground base station and the users. Due to an inclusion of multiple hops, the existing solutions for two-hop networks cannot be applied due to the incurred backhaul constraints for each hop. To this end, we propose an analytical approach based on an alternating optimization of the FlyBSs' 3D positions as well as the association of the users to the FlyBSs over time. The proposed optimization is provided under practical constraints on the FlyBS's flying speed and altitude as well as the constraints on the achievable capacity at the backhaul link. The proposed solution is of a low complexity and extends the sum capacity by 23%-38% comparing to state-of-the-art solutions. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: Accepted in IEEE GLOBECOM 2022

QoS-Aware Sum Capacity Maximization for Mobile Internet of Things Devices Served by UAVs

Authors: Mohammadsaleh Nikooroo, Zdenek Becvar, Omid Esrafilian, David Gesbert

Abstract: The use of unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) is considered as an effective tool to improve performance of the mobile networks. Nevertheless, such potential improvement requires an efficient positioning of the FlyBS. In this paper, we maximize the sum downlink capacity of the mobile Internet of Things devices (IoTD) served by the FlyBSs while a minimum required… ▽ More The use of unmanned aerial vehicles (UAVs) acting as flying base stations (FlyBSs) is considered as an effective tool to improve performance of the mobile networks. Nevertheless, such potential improvement requires an efficient positioning of the FlyBS. In this paper, we maximize the sum downlink capacity of the mobile Internet of Things devices (IoTD) served by the FlyBSs while a minimum required capacity to every device is guaranteed. To this end, we propose a geometrical approach allowing to derive the 3D positions of the FlyBS over time as the IoTDs move and we determine the transmission power allocation for the IoTDs. The problem is formulated and solved under practical constraints on the FlyBS's transmission and propulsion power consumption as well as on flying speed. The proposed solution is of a low complexity and increases the sum capacity by 15%-46% comparing to state-of-the-art works. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: Accepted in IEEE PIMRC Workshops 2022