-
The ECFA Early Career Researcher's Panel: composition, structure, and activities, 2021 -- 2022
Authors:
ECFA Early-Career Researcher Panel,
:,
Andrei Alexandru Geanta,
Chiara Amendola,
Liliana Apolinario,
Jan-Hendrik Arling,
Adi Ashkenazi,
Kamil Augsten,
Emanuele Bagnaschi,
Evelin Bakos,
Liron Barak,
Diogo Bastos,
Giovanni Benato,
Bugra Bilin,
Neven Blaskovic Kraljevic,
Lydia Brenner,
Francesco Brizioli,
Antoine Camper,
Alessandra Camplani,
Xabier Cid Vidal,
Hüseyin Dag,
Flavia de Almeida Dias,
Jordy Degens,
Eleonora Diociaiuti,
Laurent Dufour
, et al. (52 additional authors not shown)
Abstract:
The European Committee for Future Accelerators (ECFA) Early Career Researcher's (ECR) panel, which represents the interests of the ECR community to ECFA, officially began its activities in January 2021. In the first two years, the panel has defined its own internal structure, responded to ECFA requests for feedback, and launched its own initiatives to better understand and support the diverse inte…
▽ More
The European Committee for Future Accelerators (ECFA) Early Career Researcher's (ECR) panel, which represents the interests of the ECR community to ECFA, officially began its activities in January 2021. In the first two years, the panel has defined its own internal structure, responded to ECFA requests for feedback, and launched its own initiatives to better understand and support the diverse interests of early career researchers. This report summarises the panel composition and structure, as well as the different activities the panel has been involved with during the first two years of its existence.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
Authors:
G. Aad,
A. V. Akimov,
K. Al Khoury,
M. Aleksa,
T. Andeen,
C. Anelli,
N. Aranzabal,
C. Armijo,
A. Bagulia,
J. Ban,
T. Barillari,
F. Bellachia,
M. Benoit,
F. Bernon,
A. Berthold,
H. Bervas,
D. Besin,
A. Betti,
Y. Bianga,
M. Biaut,
D. Boline,
J. Boudreau,
T. Bouedo,
N. Braam,
M. Cano Bret
, et al. (173 additional authors not shown)
Abstract:
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Cons…
▽ More
The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters enhances the physics reach of the experiment during the upcoming operation at increasing Large Hadron Collider luminosities. The new system, installed during the second Large Hadron Collider Long Shutdown, increases the trigger readout granularity by up to a factor of ten as well as its precision and range. Consequently, the background rejection at trigger level is improved through enhanced filtering algorithms utilizing the additional information for topological discrimination of electromagnetic and hadronic shower shapes. This paper presents the final designs of the new electronic elements, their custom electronic devices, the procedures used to validate their proper functioning, and the performance achieved during the commissioning of this system.
△ Less
Submitted 16 May, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
Results of the 2021 ECFA Early-Career Researcher Survey on Training in Instrumentation
Authors:
ECFA Early-Career Researcher Panel,
:,
Anamika Aggarwal,
Chiara Amendola,
Liliana Apolinario,
Jan-Hendrik Arling,
Adi Ashkenazi,
Kamil Augsten,
Julien Baglio,
Evelin Bakos,
Liron Barak,
Diogo Bastos,
Bugra Bilin,
Silvia Biondi,
Neven Blaskovic Kraljevic,
Lydia Brenner,
Francesco Brizioli,
Antoine Camper,
Alessandra Camplani,
Xabier Cid Vidal,
Hüseyin Dag,
Flavia de Almeida Dias,
Eleonora Diociaiuti,
Lennart van Doremalen,
Katherine Dunne
, et al. (52 additional authors not shown)
Abstract:
The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the European ECR community. A working group within the ECFA ECR panel held a Townhall Meeting to get first input, and then designed and broadly circulated a detailed survey to gather feedback from the larger ECR community. A tota…
▽ More
The European Committee for Future Accelerators (ECFA) Early-Career Researchers (ECR) Panel was invited by the ECFA Detector R&D Roadmap conveners to collect feedback from the European ECR community. A working group within the ECFA ECR panel held a Townhall Meeting to get first input, and then designed and broadly circulated a detailed survey to gather feedback from the larger ECR community. A total of 473 responses to this survey were received, providing a useful overview of the experiences of ECRs in instrumentation training and related topics. This report summarises the feedback received, and is intended to serve as an input to the ECFA Detector R&D Roadmap process.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Novel Interpretation Strategy for Searches of Singly Produced Vector-like Quarks at the LHC
Authors:
Avik Roy,
Nikiforos Nikiforou,
Nuno Castro,
Timothy Andeen
Abstract:
Vector-like Quarks (VLQs) are potential signatures of physics beyond the Standard Model at the TeV energy scale and major efforts have been put forward at both ATLAS and CMS experiments in search of these particles. In order to make these search results more relatable in the context of most plausible theories of VLQs, it is deemed important to present the analysis results in a general fashion. We…
▽ More
Vector-like Quarks (VLQs) are potential signatures of physics beyond the Standard Model at the TeV energy scale and major efforts have been put forward at both ATLAS and CMS experiments in search of these particles. In order to make these search results more relatable in the context of most plausible theories of VLQs, it is deemed important to present the analysis results in a general fashion. We investigate the challenges associated with such interpretations of singly produced VLQ searches and propose a generalized, semi-analytical framework that allows a model-independent casting of the results in terms of unconstrained, free parameters of the VLQ Lagrangian. We also propose a simple parameterization of the correction factor to the single VLQ production cross-section at large decay widths. We illustrate how the proposed framework can be used to conveniently represent statistical limits by numerically reinterpreting results from benchmark ATLAS and CMS analyses.
△ Less
Submitted 24 June, 2020; v1 submitted 1 March, 2020;
originally announced March 2020.
-
Report on the ECFA Early-Career Researchers Debate on the 2020 European Strategy Update for Particle Physics
Authors:
N. Andari,
L. Apolinário,
K. Augsten,
E. Bakos,
I. Bellafont,
L. Beresford,
A. Bethani,
J. Beyer,
L. Bianchini,
C. Bierlich,
B. Bilin,
K. L. Bjørke,
E. Bols,
P. A. Brás,
L. Brenner,
E. Brondolin,
P. Calvo,
B. Capdevila,
I. Cioara,
L. N. Cojocariu,
F. Collamati,
A. de Wit,
F. Dordei,
M. Dordevic,
T. A. du Pree
, et al. (96 additional authors not shown)
Abstract:
A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the E…
▽ More
A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the ECRs discussed future colliders in terms of the physics prospects, their implications for accelerator and detector technology as well as computing and software. The discussion was organised into several topic areas. From these areas two common themes were particularly highlighted by the ECRs: sociological and human aspects; and issues of the environmental impact and sustainability of our research.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
A detector for CLIC: main parameters and performance
Authors:
Dominik Arominski,
Jean-Jacques Blaising,
Erica Brondolin,
Dominik Dannheim,
Konrad Elsener,
Frank Gaede,
Ignacio García-García,
Steven Green,
Daniel Hynds,
Emilia Leogrande,
Lucie Linssen,
John Marshall,
Nikiforos Nikiforou,
Andreas Nürnberg,
Estel Perez-Codina,
Marko Petrič,
Florian Pitters,
Aidan Robson,
Philipp Roloff,
André Sailer,
Ulrike Schnoor,
Frank Simon,
Rosa Simoniello,
Simon Spannagel,
Rickard Ström
, et al. (3 additional authors not shown)
Abstract:
Together with the recent CLIC detector model CLICdet a new software suite was introduced for the simulation and reconstruction of events in this detector. This note gives a brief introduction to CLICdet and describes the CLIC experimental conditions at 380 GeV and 3 TeV, including beam-induced backgrounds. The simulation and reconstruction tools are introduced, and the physics performance obtained…
▽ More
Together with the recent CLIC detector model CLICdet a new software suite was introduced for the simulation and reconstruction of events in this detector. This note gives a brief introduction to CLICdet and describes the CLIC experimental conditions at 380 GeV and 3 TeV, including beam-induced backgrounds. The simulation and reconstruction tools are introduced, and the physics performance obtained is described in terms of single particles, particles in jets, jet energy resolution and flavour tagging. The performance of the very forward electromagnetic calorimeters is also discussed.
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Searches for new heavy quarks in ATLAS
Authors:
Nikiforos Nikiforou
Abstract:
A search for new heavy quarks focusing on recent vector-like quark searches with the ATLAS detector at the CERN Large Hadron Collider is presented. Two recent searches targeting the pair production of type vector-like quarks are described. The first search is sensitive to vector-like up-type quark ($T$) decays to a $t$ quark and either a Standard Model Higgs boson or a $Z$ boson. The second search…
▽ More
A search for new heavy quarks focusing on recent vector-like quark searches with the ATLAS detector at the CERN Large Hadron Collider is presented. Two recent searches targeting the pair production of type vector-like quarks are described. The first search is sensitive to vector-like up-type quark ($T$) decays to a $t$ quark and either a Standard Model Higgs boson or a $Z$ boson. The second search is primarily sensitive to $T$ decays to $W$ boson and a $b$ quark. Additionally, the results can be interpreted for alternative VLQ decays.
△ Less
Submitted 14 August, 2018;
originally announced August 2018.
-
What's in a Name? Understanding Profile Name Reuse on Twitter
Authors:
Enrico Mariconti,
Jeremiah Onaolapo,
Syed Sharique Ahmad,
Nicolas Nikiforou,
Manuel Egele,
Nick Nikiforakis,
Gianluca Stringhini
Abstract:
Users on Twitter are commonly identified by their profile names. These names are used when directly addressing users on Twitter, are part of their profile page URLs, and can become a trademark for popular accounts, with people referring to celebrities by their real name and their profile name, interchangeably. Twitter, however, has chosen to not permanently link profile names to their correspondin…
▽ More
Users on Twitter are commonly identified by their profile names. These names are used when directly addressing users on Twitter, are part of their profile page URLs, and can become a trademark for popular accounts, with people referring to celebrities by their real name and their profile name, interchangeably. Twitter, however, has chosen to not permanently link profile names to their corresponding user accounts. In fact, Twitter allows users to change their profile name, and afterwards makes the old profile names available for other users to take. In this paper, we provide a large-scale study of the phenomenon of profile name reuse on Twitter. We show that this phenomenon is not uncommon, investigate the dynamics of profile name reuse, and characterize the accounts that are involved in it. We find that many of these accounts adopt abandoned profile names for questionable purposes, such as spreading malicious content, and using the profile name's popularity for search engine optimization. Finally, we show that this problem is not unique to Twitter (as other popular online social networks also release profile names) and argue that the risks involved with profile-name reuse outnumber the advantages provided by this feature.
△ Less
Submitted 14 February, 2017;
originally announced February 2017.
-
Higgs Physics at the CLIC Electron-Positron Linear Collider
Authors:
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
N. Alipour Tehrani,
C. Balázs,
Y. Benhammou,
M. Benoit,
B. Bilki,
J. -J. Blaising,
M. J. Boland,
M. Boronat,
O. Borysov,
I. Božović-Jelisavčić,
M. Buckland,
S. Bugiel,
P. N. Burrows,
T. K. Charles,
W. Daniluk,
D. Dannheim,
R. Dasgupta,
M. Demarteau,
M. A. Díaz Gutierrez,
G. Eigen,
K. Elsener,
U. Felzmann
, et al. (99 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is an option for a future e+e- collider operating at centre-of-mass energies up to 3 TeV, providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: sqrt(s) = 350 GeV, 1.4 TeV and 3…
▽ More
The Compact Linear Collider (CLIC) is an option for a future e+e- collider operating at centre-of-mass energies up to 3 TeV, providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: sqrt(s) = 350 GeV, 1.4 TeV and 3 TeV. The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung (e+e- -> ZH) and WW-fusion (e+e- -> Hnunu), resulting in precise measurements of the production cross sections, the Higgs total decay width Gamma_H, and model-independent determinations of the Higgs couplings. Operation at sqrt(s) > 1 TeV provides high-statistics samples of Higgs bosons produced through WW-fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes e+e- -> ttH and e+e- -> HHnunu allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit.
△ Less
Submitted 5 June, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Performance of the ATLAS Liquid Argon Calorimeter after three years of LHC operation and plans for a future upgrade
Authors:
Nikiforos Nikiforou
Abstract:
The ATLAS experiment is designed to study the proton-proton collisions produced at the Large Hadron Collider (LHC) at CERN. Liquid argon sampling calorimeters are used for all electromagnetic calorimetry as well as hadronic calorimetry in the endcaps. After installation in 2004--2006, the calorimeters were extensively commissioned over the three--year period prior to first collisions in 2009, usin…
▽ More
The ATLAS experiment is designed to study the proton-proton collisions produced at the Large Hadron Collider (LHC) at CERN. Liquid argon sampling calorimeters are used for all electromagnetic calorimetry as well as hadronic calorimetry in the endcaps. After installation in 2004--2006, the calorimeters were extensively commissioned over the three--year period prior to first collisions in 2009, using cosmic rays and single LHC beams. Since then, approximately 27 fb$\mathbf{^{-1}}$ of data have been collected at an unprecedented center of mass energy. During all these stages, the calorimeter and its electronics have been operating almost optimally, with a performance very close to specifications. This paper covers all aspects of these first years of operation.
The excellent performance achieved is especially presented in the context of the discovery of the elusive Higgs boson. The future plans to preserve this performance until the end of the LHC program are also presented.
△ Less
Submitted 4 July, 2013; v1 submitted 28 June, 2013;
originally announced June 2013.